高(111)晶面暴露的Pd纳米颗粒的制备与表征及其加氢性能

通过液相氢气还原法,在不同温度下制备出了不同（111）晶面占比的Pd单晶纳米颗粒,用活性炭吸附制备成Pd/C纳米催化剂。通过透射电子显微镜（TEM）、傅里叶变换（FFT）、X射线衍射（XRD）表征证实了低温下制备的Pd纳米颗粒具有较高的（111）晶面占比。氢氧脉冲滴定（H₂-O₂）和H₂-程序升温脱附（H₂-TPD）结果显示,上述催化剂表面吸附氢气量与其Pd（111）晶面占比呈线性关系。此外,该系列Pd/C催化剂具有相似的粒径4.3 nm以及较窄的尺寸分布,相近的孔隙参数和Pd负载量,从而可对比（111）晶面比例差异对其加氢性能的影响。3个探针反应（苯乙烯、环己烯和对硝基甲苯的加氢反应）的实验结果表明,相比于低（111）晶面暴露比例的Pd/C催化剂,含有高（111）晶面暴露比例的Pd/C催化剂显示出更高的加氢活性,且Pd（111）晶面比例与氢气消耗速率呈一定的线性关系,这归因于H₂优先吸附于Pd（111）晶面促进了活性氢原子的形成。基于以上分析,高（111）晶面暴露的Pd基催化剂有利于加氢性能的提高。     

铈基复合氧化物载体对钯催化剂三效催化性质的影响

采用共沉淀法制备了CeO2,Ce0.6Zr0.4O2和Ce0.6Zr0.3Co0.1Ox载体材料,采用沉积沉淀法制备了Pd/CeO2,Pd/Ce0.6Zr0.4O2和Pd/Ce0.6Zr0.3Co0.1O2-x催化剂。采用X射线衍射、氮气吸脱附、透射电子显微镜和氢气程序升温还原技术对三种催化剂的物化性质进行了表征,研究了其三效催化性质和热稳定性。结果表明:沉积沉淀法能制备出较小粒径且均匀分散的钯催化剂。掺杂钴元素(Co)可以改善载体及催化剂的氧化还原性能,提高催化剂的三效催化活性,并拓宽催化剂的三效工作窗口。Pd/Ce0.6Zr0.3Co0.1O2-x在水热老化后表现出良好的催化活性和优异的氧化还原性能。     

巯基功能化介孔材料高效锚定钯负载型催化剂的制备及其苯酚加氢催化性能

以含巯基官能团有机硅烷修饰的介孔材料MCM-41和SBA-15为载体, 采用浸渍-氢气还原法制备了高分散和高活性的负载型Pd催化剂. X射线衍射、N₂吸附-脱附和透射电子显微镜表征结果显示, 所制Pd催化剂Pd-SH-MCM-41和Pd-SH-SBA-15具有很好的长程有序结构、分布均匀的孔径、高比表面积及高度分散的Pd颗粒. 苯酚加氢反应结果表明, 以Pd-SH-MCM-41和Pd-SH-SBA-15为催化剂时, 在80℃, 1.0MPa反应1h, 苯酚转化率达99%以上, 环己酮选择性为98%. 它们的催化活性为商业Pd/C催化剂的5倍, Pd/MCM-41和Pd/SBA-15催化剂的3倍. 这可归因于介孔材料表面修饰的巯基官能团对Pd的锚定作用, 避免了Pd颗粒的团聚, 使其高度分散在介孔材料上.     

水热老化对Cu改性的W/CeTi催化剂NH3-SCR性能的影响

采用浸渍法制备了CuW/CeTi和W/CuCeTi催化剂,考察了催化剂中Cu的不同作用方式对氨气选择性催化还原NO_x （NH₃-SCR）反应脱硝性能的影响。新鲜的CuW/CeTi和W/CuCeTi在低温下显示出优异的活性。经过800℃、10 h水热老化后,W/CuCeTi表现出比CuW/CeTi更优异的脱硝性能,证明W/CuCeTi具有更高的水热稳定性。通过透射电子显微镜（TEM）、X射线衍射（XRD）、拉曼光谱（Raman）、N₂物理吸附-脱附、X射线光电子能谱（XPS）、氨气程序升温脱附（NH₃-TPD）和氢气程序升温还原（H₂-TPR）表征,发现Cu的掺杂形成的Cu-O-Ce结构能够提高CeTi的抗烧结能力,同时削弱W-CeO₂相互作用,抑制老化过程中Ce₂（WO₄）₃物质的形成,使W/CuCeTi表现出更优异的水热稳定性。     

双功能Pd/ZrHP催化剂的制备及其在苯酚选择性加氢反应中的应用

苯酚加氢制备环己酮是合成纤维（尼龙）生产过程中的重要环节。采用微波法快速合成了具有层状结构的固体酸（磷酸氢锆,ZrHP）和ZrHP负载的Pd催化剂,利用X射线衍射（XRD）、扫描电子显微镜（SEM）、高倍透射电子显微镜（HRTEM）、氮气吸附-脱附、X射线光电子能谱（XPS）和程序升温脱附（TPD）技术对催化剂的结构、形貌和表面特性进行了详细的表征,并将其应用于苯酚选择性加氢制环己酮的反应中。研究发现：在温和条件（100℃,1.0 MPa H₂）下,Pd/ZrHP比传统的氧化物（Al₂O₃、SiO₂、MgO）、分子筛（H-Beta）、活性炭（XC-72）负载的Pd催化剂具有更高的活性和稳定性,催化剂表面Pd原子的比活性最高可达612.2 h^-1,并且经过5次循环使用后催化剂无明显失活。结合表征结果推断,金属中心Pd与ZrHP表面的酸性位点之间的协同作用可能是影响苯酚加氢产物停留在环己酮阶段的关键因素。     

石墨烯-富勒烯铵碘盐复合载体负载Pd催化剂的制备及电催化氧化乙醇性能

采用水合肼水热还原法制备了不同比例还原氧化石墨烯(RGO)与n型自掺杂富勒烯铵碘盐(PCBANI)的复合载体RGO-PCBANI, 并在电极上用这些载体负载Pd纳米粒子制备了Pd/RGO-PCBANI电催化剂. 利用扫描电子显微镜(SEM)、 透射电子显微镜(TEM)、 X射线衍射(XRD)及X射线光电子能谱(XPS)对RGO-PCBANI和Pd/RGO-PCBANI的形貌及结构进行了表征. 利用循环伏安和计时电流等电化学方法研究了该催化剂电催化氧化乙醇的性能. 结果表明, 所制备的RGO-PCBANI(6∶1)载体的分散性较好, 用其负载的Pd纳米粒子平均粒径为5.2 nm, 且Pd/RGO-PCBANI(6∶1)催化剂的催化活性最好, 质量电流密度达到1288.8 mA/mg.     

磁性纳米Pd/Fe3O4催化剂的制备及其在Heck反应中的应用

通过使用聚乙烯吡咯烷酮作为稳定剂,合成了磁性Pd/Fe₃O₄纳米颗粒催化剂。对该催化剂进行粉末X射线衍射、透射电子显微镜、感应耦合等离子体和磁性表征。将Pd/Fe₃O₄催化剂用于Heck反应,检测其催化性能。测试结果表明Pd纳米颗粒负载在Fe₃O₄纳米颗粒上,而且催化剂的尺寸<20 nm,并在Heck反应中表现了极好的催化性能。此外,催化剂可以通过磁场回收利用, 且催化活性没有显著的降低。     

多孔碳纳米纤维负载Pd纳米颗粒用于增强电催化氧还原性能

采用溶剂热法合成了以锆为金属核心、2-氨基为配体的锆基金属有机骨架（UiO-66）纳米材料,通过静电纺丝技术制备出UiO-66自由分散的聚丙烯腈（PAN/UiO-66）纤维,可控热解得到多孔碳纳米纤维（porous carbon nanofibers,PCNFs）,结合湿化学还原法在PCNFs表面沉积Pd纳米颗粒,得到PCNFs@Pd复合材料。通过扫描电子显微镜、透射电子显微镜、X射线衍射技术对其形貌、组成、结构进行表征;采用电化学工作站分别测试了PCNFs@Pd在0.1 mol·L^-1 KOH和0.1 mol·L^-1 HClO₄电解质中氧还原性能（oxygen reduction reaction,ORR）。结果表明,在PAN纤维中添加UiO-66显著提高了PCNFs@Pd（Pd负载量为0.34%）复合材料的ORR性能。相比40% Pt/C,在碱性电解质中,PCNFs@Pd复合材料展示出更低的Tafel斜率、更优异的循环稳定性和耐甲醇中毒性。在酸性电解质中也表现出类似20% Pt/C的催化活性和循环稳定性。     

三维Ni(OH)2/Ni@N掺杂还原氧化石墨烯复合电极的制备及电催化析氢性能

采用脱合金结合两步水热法将3D Ni （OH）₂/Ni与N掺杂还原氧化石墨烯（rGO）结合,成功制备出3D花状Ni （OH）₂/Ni@NG复合电极。通过X射线衍射（XRD）、X射线光电子能谱（XPS）、扫描电子显微镜（SEM）和透射电子显微镜（TEM）表征其物相、价态分布及微观结构。在1 mol·L^-1 KOH溶液中测试其电催化析氢反应（HER）性能。结果表明：Ni （OH）₂/Ni的3D结构增加了电极的活性面积,与N掺杂rGO复合显著提高了电子/离子的传输速率,其过电位为108 mV （η₁₀）,Tafel斜率为114.9 mV·dec^-1,表现出良好的HER催化活性。1 000圈循环伏安法及计时电位法测试表明,Ni （OH）₂/Ni@NG电极均表现出良好的稳定性。     

镁铝复合金属氧化物负载纳米Pd催化剂的制备及其在醇胺一步合成亚胺反应中的应用

以共沉淀法制备的Pd2+掺杂水滑石为前驱体,通过焙烧、还原得到了镁铝复合金属氧化物负载纳米Pd催化剂.利用X射线粉末衍射(XRD),X射线光电子能谱(XPS),场发射透射电子显微镜(TEM)等手段对催化剂进行表征,发现通过Pd2+掺杂水滑石为前驱体制备的复合金属氧化物负载纳米Pd催化剂,可以实现Pd纳米颗粒(3.6 nm)在镁铝复合氧化物表面的均匀分散.该催化剂在催化苯甲醇和苯胺一步法合成N-苄叉苯胺时,在温和的反应条件下表现出良好的催化性能以及对N-苄叉苯胺较高的选择性,产物收率99%.在循环实验过程中,催化剂表现出较好的稳定性,并且催化活性未见下降.     

Catalytic Hydrodechlorination of 1,2,4,5‐Tetrachlorobenzene over Various Supports Loaded Palladium Catalysts

Water pollution by polychlorinated aromatic hydrocarbons has always been a global issue. In this work, we reported a synthesis of supported palladium catalysts Pd/C, Pd/CeO₂, Pd/SBA‐15, Pd/ZrO₂,Pd/SiO₂, and Pd/Al₂O₃ as well as their catalytic activities on hydrodechlorination (HDC) of 1,2,4,5‐tetrachlorobenzene (TeCB). These Pd catalysts were characterized by Brunauer‐Emmett‐Teller (BET) specific surface area, Transmission electron microscopy (TEM), X‐ray diffraction (XRD), energy Dispersive X‐ray Fluorescence (EDXRF), CO‐chemisorption, and H2‐temperature programmed reduction (H2‐TPR) analysis. Pd/C, Pd/CeO₂ and Pd/SBA‐15 catalysts showed relatively high catalytic activities. The catalytic activities were associated with dispersion of Pd, metal surface area, and reaction temperature, etc.     

Water soluble gold-polyaniline nanocomposite: A substrate for surface enhanced Raman scattering and catalyst for dye degradation

In this work, a water-soluble gold nanoparticle-encapsulated polyaniline nanocomposite (AuNP-PANI) was prepared in the presence of an ionic surfactant such as cetyltrimethylammonium bromide (CTAB) using versatile two steps method. The prepared nanoparticles (AuNPs) were characterized by UV–Visible spectroscopy, Transmission Electron Microscope (TEM) and Dynamic Light Scattering (DLS). The nanocomposite (AuNP-PANI) were initially characterized using UV–Visible spectroscopy, Transmission Electron Microscope (TEM), Scanning Transmission Electron Microscope (STEM) and DLS. The structure and composition of AuNP-PANI further characterized using Fourier Transmission Infrared Spectroscopy (FTIR), X-ray diffraction study (XRD), Energy Dispersive X-ray Spectroscopy (EDS) and Thermogravimetric analysis (TGA). Electrochemical properties of AuNP-PANI were studied using Cyclic Voltammetry (CV). The prepared nanocomposite exhibited good surface enhanced Raman scattering (SERS) of 4-amino thiophenol (4-ATP) and 4- (dimethyl amino) pyridine (4-DMAP) for which the enhancement factor (EF) were found to be1.95 × 10⁵ and 2.016 × 10⁵, respectively. The nanocomposite also showed excellent catalytic activity for the chemical degradation of Congo red (CR) and methylene blue (MB) as evidenced from the calculated rate constants which were determined to be 0.30 s⁻¹ and 0.33 s⁻¹, respectively.     

Studies on Chitosan modified ZrO2–CeO2 metal oxide and their Photo catalytic activity under solar light irradiation for water remediation

Chitosan modified CeO₂/ZrO₂ were prepared by co-precipitation method and its photocatalytic activity was studied while exposed to solar light. Various doping concentrations was evaluated and 30 mol % CeO₂/ZrO₂ doping concentration enhanced higher activity when it was modified into Chitosan employing Orange G dye as a model pollutant while exposed to sun light. The synthesized catalyst was highly crystalline, and its average crystalline size was found to be 30 nm using X-ray diffraction analysis. Structural morphology, functional groups, thermal decomposition temperature and particle size were confirmed by Scanning Electron Microscope (SEM), Fourier Transform-Infra Red, Thermal Gravimetric Analysis and Transmission Electron Microscope analysis. XPS confirms the band alignment and oxidation states of the synthesized photo catalyst. In accordance with the UV-Diffused Reflectance Spectrum, the band gap energy is 2.9 eV. The enhanced photo catalytic activities of the prepared photocatalyst were confirmed by effect of catalyst, effect of dye concentration, effect of electrolytes, kinetics and COD. The reaction follows first order kinetics, and the pseudo first order rate constant was evaluated from the kinetics plot.     

Banana pulp extract mediated synthesis of Cu2O nanoparticles: An efficient heterogeneous catalyst for the ipso-hydroxylation of arylboronic acids

A green and facile novel procedure has been developed for the synthesis of Cu₂O nanoparticles within a very short reaction time using banana pulp extract as a reducing agent. The synthesized nanoparticles are well characterized by SEM (Scanning Electron Microscope), TEM (Transmission Electron Microscope) and powder XRD (X-ray Diffraction) methods. An environmental benign and highly efficient protocol for the ipso-hydroxylation of aryl and hetero arylboronic acids using bio-fabricated Cu₂O nanoparticles as a catalyst and aqueous H₂O₂ as an oxidant has also been developed. The main advantages of this protocol are the base free reaction condition, reusable and heterogeneous catalytic system, and short reaction time with excellent yields.     

陈化体系组成对Ce0.65Zr0.35O2储氧材料性能的影响

采用共沉淀法制备了Ce_0.65Zr_0.35O₂(CZ)储氧材料, 在传统的水陈化体系中引入了乙醇, 研究了乙醇的加入对CZ储氧材料性能的影响. 对所制备样品进行了傅里叶变换红外(FTIR)光谱、X射线光电子能谱(XPS)、粉末X射线衍射(XRD)、扫描电镜(SEM)、N₂吸附-脱附、储氧量(OSC)和H₂程序升温还原(H₂-TPR)的表征, 并考察了以CZ储氧材料为载体制备的单钯催化剂的三效性能. 结果表明, 乙醇引入陈化体系对样品的结构和性能有显著影响. 以醇水共存体系陈化制备的CZ储氧材料颗粒小、堆积松散、孔径分布宽、孔容大, 具有优异的储氧性能和热稳定性, 经1000 °C焙烧后, 比表面积为29.3 m²·g^-1, 储氧量仍高达520 μmol·g^-1. 以此为载体制备的单钯催化剂, 空燃比操作窗口宽, 对C₃H₈、CO、NO的转化明显优于水陈化体系制备的储氧材料所制备的催化剂.     

Microwave-assisted preparation and enhanced photocatalytic activity of Bi2WO6/BiOI heterojunction for organic pollutants degradation under visible-light irradiation

In this research, we adopted morphology control and constructing p-n heterojunction to boost the photocatalytic performance of BiOI. BiOI with three morphologies (nanoplate, micro-flower, microsphere) was fabricated via a wet-chemical method at room temperature using different solvents. And Bi₂WO₆/BiOI microspheres were successfully prepared by a microwave-assisted synthetic method. The as-synthesized samples were characterized by X-ray Diffraction (XRD), Scanning Electron Microscope (SEM), Transmission Electron Microscopy (TEM), Energy Dispersive Spectroscopy (EDS) and High-resolution Transmission Electron Microscopy (HRTEM). The results of photo-degradation experiment demonstrated that BiOI-3 and BWOI-3 show high photocatalytic performance towards methyl orange (MO) and bisphenol A (BPA) degradation due to the high specific surface area, synergistic effect between p-type BiOI and n-type Bi₂WO₆ and high separation efficiency of electron-hole pairs, which is verified by Brunauer-Emmett-Teller (BET), Photocurrent (PC) and Electrochemical Impedance Spectroscopy (EIS) analysis. Moreover, the repeated photocatalytic experiment was carried out by using MO as the representative organic pollutant, manifesting the good durability of the sample.     

Carbon-supported Pd-Co as cathode catalyst for APEMFCs and validation by DFT

Carbon supported PdCo catalysts in varying atomic ratios of Pd to Co, namely 1 : 1, 2 : 1 and 3 : 1, were prepared. The oxygen reduction reaction (ORR) was studied on commercial carbon-supported Pd and carbon-supported PdCo nanocatalysts in aqueous 0.1 M KOH solution with and without methanol. The structure, dispersion, electrochemical characterization and surface area of PdCo/C were determined by X-ray diffraction (XRD), Transmission Electron Microscopy (TEM) and Cyclic Voltammetry (CV), respectively. The electrochemical activity for ORR was evaluated from Linear Sweep Voltammograms (LSV) obtained using a rotating ring disk electrode. The catalysts were evaluated for their electrocatalytic activity towards oxygen reduction reaction (ORR) in Alkaline Polymer Electrolyte Membrane Fuel Cells (APEMFCs). PdCo(3 : 1)/C gives higher performance (85 mW cm(-2)) than PdCo(1 : 1)/C, PdCo(2 : 1)/C and Pd/C. The maximum electrocatalytic activity for ORR in the presence of methanol was observed for PdCo(3 : 1)/C. First principles calculations within the framework of density functional theory were performed to understand the origin of its catalytic activity based on the energy of adsorption of an O(2) molecule on the cluster, structural variation and charge transfer mechanism.     

制备方法对NiP非晶态合金性质及催化活性的影响

分别使用三种方法制备了NiP非晶态合金：次磷酸钠还原镍盐（方法1）、次磷酸镍自分解（方法2）和使用有机胺调节溶液pH值的次磷酸还原镍盐（方法3）。研究了产品的物性，并以环丁烯砜加氢反应为探针检测了NiP非晶态合金的催化活性。研究结果表明，次磷酸钠体系制备的产品性质比较稳定，条件的改变对产物性质的影响不显著，催化活性一般在50%～60%之间；次磷酸镍体系中制备的样品显示出较高的催化活性，环丁烯砜转化率在90%以上；次磷酸体系制备样品的性质对条件变化较为敏感，催化剂的活性在70%～98%之间波动。发现方法2得到的NiP非晶态合金呈现为分散的完美的球形颗粒，且颗粒之间不存在聚集现象；使用方法3可以得到高比表面积的NiP非晶态合金。两种新方法所制备的NiP非晶态合金具有较小的粒径、较高的比表面积、较高的热稳定性和较高的催化反应活性。     

Synthesis of Ni/SiO<Subscript>2</Subscript> nanoparticles for catalytic benzene hydrogenation

Nickel nanoparticles supported on silica were prepared by hydrazine reduction in aqueous medium. The obtained solids were characterized by X-ray diffraction (XRD), Transmission Electronic Microscopy (TEM), Electron Diffraction (ED), hydrogen chemisorption, and Temperature Programmed Desorption of hydrogen (H₂-TPD). The catalytic properties were evaluated for benzene hydrogenation in the temperature range 75–230 °C. XRD patterns reveal presence of the metallic nickel particles with fcc structure. Metal dispersion and hydrogen storage increase with decreasing metal particle size. The H₂-TPD profiles exhibit two domains, one due to desorption of hydrogen from Ni metal and another due to spillover from metal to the support. The catalytic activity strongly depends on the metal loading. It increases with decreasing metal loading. This is attributed to metal surface area, which also increases with decreasing metal loading. Kinetic studies of benzene hydrogenation on the Ni catalysts showed that the benzene partial order is around −2. This significant negative value is ascribed to a strong adsorption of benzene on the catalyst surface.     

铈锆固溶体的微波辅助法制备及表征

采用共沉淀法并结合不同的老化处理方式(室温陈化、常规加热回流和微波辅助加热回流)制备了Ce_0.6Zr_0.4O₂固溶体。利用SEM、N₂吸附、XRD、Raman光谱和H₂-TPR等技术对样品的形貌、比表面积、孔结构、晶相结构、高温热稳定性和还原性进行了表征,并考察了其对CO氧化反应的催化性能。结果表明,微波辅助加热回流老化处理所制备的固溶体属于立方萤石结构,颗粒的大小均匀,表面结构疏松,具有最大的比表面积和孔容、最高的热稳定性及最好的低温还原性。CO氧化实验表明微波辅助加热回流老化处理所制备的Ce_0.6Zr_0.4O₂固溶体具有最好的催化氧化活性。