BiFeO<Subscript>3</Subscript>-coated spinel LiNi<Subscript>0.5</Subscript>Mn<Subscript>1.5</Subscript>O<Subscript>4</Subscript> with improved electrochemical performance as cathode materials for lithium-ion batteries

Spinel LiNi_0.5Mn_1.5O₄ cathode material is a promising candidate for next-generation rechargeable lithium-ion batteries. In this work, BiFeO₃-coated LiNi_0.5Mn_1.5O₄ materials were prepared via a wet chemical method and the structure, morphology, and electrochemical performance of the materials were studied. The coating of BiFeO₃ has no significant impact on the crystal structure of LiNi_0.5Mn_1.5O₄. All BiFeO₃-coated LiNi_0.5Mn_1.5O₄ materials exhibit cubic spinel structure with space group of Fd3m. Thin BiFeO₃ layers were successfully coated on the surface of LiNi_0.5Mn_1.5O₄ particles. The coating of 1.0 wt% BiFeO₃ on the surface of LiNi_0.5Mn_1.5O₄ exhibits a considerable enhancement in specific capacity, cyclic stability, and rate performance. The initial discharge capacity of 118.5 mAh g^?1 is obtained for 1.0 wt% BiFeO₃-coated LiNi_0.5Mn_1.5O₄ with very high capacity retention of 89.11% at 0.1 C after 100 cycles. Meanwhile, 1.0 wt% BiFeO₃-coated LiNi_0.5Mn_1.5O₄ electrode shows excellent rate performance with discharge capacities of 117.5, 110.2, 85.8, and 74.8 mAh g^?1 at 1, 2, 5, and 10 C, respectively, which is higher than that of LiNi_0.5Mn_1.5O₄ (97.3, 90, 77.5, and 60.9 mAh g^?1, respectively). The surface coating of BiFeO₃ effectively decreases charge transfer resistance and inhibits side reactions between active materials and electrolyte and thus induces the improved electrochemical performance of LiNi_0.5Mn_1.5O₄ materials.     

Co-precipitation spray-drying synthesis and electrochemical performance of stabilized LiNi<Subscript>0.5</Subscript>Mn<Subscript>1.5</Subscript>O<Subscript>4</Subscript> cathode materials

In this paper, the LiNi_0.5Mn_1.5O₄ cathode materials of lithium-ion batteries are synthesized by a co-precipitation spray-drying and calcining process. The use of a spray-drying process to form particles, followed by a calcination treatment at the optimized temperature of 750 °C to produce spherical LiNi_0.5Mn_1.5O₄ particles with a cubic crystal structure, a specific surface area of 60.1 m² g^?1, a tap density of 1.15 g mL^?1, and a specific capacity of 132.9 mAh g^?1 at 0.1 C. The carbon nanofragment (CNF) additives, introduced into the spheres during the co-precipitation spray-drying period, greatly enhance the rate performance and cycling stability of LiNi_0.5Mn_1.5O₄. The sample with 1.0 wt.% CNF calcined at 750 °C exhibits a maximum capacity of 131.7 mAh g^?1 at 0.5 C and a capacity retention of 98.9% after 100 cycles. In addition, compared to the LiNi_0.5Mn_1.5O₄ material without CNF, the LiNi_0.5Mn_1.5O₄ with CNF demonstrates a high-rate capacity retention that increases from 69.1% to 95.2% after 100 cycles at 10 C, indicating an excellent rate capability. The usage of CNF and the synthetic method provide a promising choice for the synthesis of a stabilized LiNi_0.5Mn_1.5O₄ cathode material.

Open image in new window

Graphical Abstract Micro/nanostructured LiNi_0.5Mn_0.5O₄ cathode materials with enhanced electrochemical performances for high voltage lithium-ion batteries are synthesized by a co-precipitation spray-drying and calcining routine and using carbon nanofragments (CNFs) as additive.

     

Improvement of the electrochemical properties of a LiNi<Subscript>0.5</Subscript>Mn<Subscript>1.5</Subscript>O<Subscript>4</Subscript> cathode material formed by a new solid-state synthesis method

In order to avoid the shortcomings of large particle size and poor uniformity of material synthesized by the traditional solid-state method, this paper utilizes a simple improvement of calcination process (i.e., calcination–milling–recalcination) based on the traditional solid-state synthesis to successfully prepare a large number of well-distributed, micrometer-sized, spherical secondary LiNi_0.5Mn_1.5O₄ particles. Each particle is composed of nano- and/or sub-micrometer-sized grains. Results of the electrochemical performance tests show that the material exhibits a remarkable cycle performance and rate capability compared with that obtained from traditional synthesis method; the spherical LiNi_0.5Mn_1.5O₄ particles can deliver a large capacity of 135.8 mAh g^?1 at a 1 C discharge rate with a high retention of 77 % after 741 cycles and a good capacity of 105.9 mAh g^?1 at 10 C. Cyclic voltammetry measurements confirm that the significantly improved electrochemical properties are due to enhanced electronic conductivity and lithium-ion diffusion coefficient resulting from the optimized morphology and particle size. This improved method is more suitable for mass production.     

Synthesis of LiNi<Subscript>1/3</Subscript>Co<Subscript>1/3</Subscript>Mn<Subscript>1/3</Subscript>O<Subscript>2</Subscript> nanoparticles by modified Pechini method and their enhanced rate capability

Layered LiNi_1/3Co_1/3Mn_1/3O₂ nanoparticles were prepared by modified Pechini method and used as cathode materials for Li-ion batteries. The pyrolytic behaviors of the foamed precursors were analyzed by use of simultaneous thermogravimetric and differential thermal analysis (TG-DTA). Structure, morphology and electrochemical performance characterization of the samples were investigated by X-ray diffraction (XRD), field emission scanning electron macroscopy(SEM), Brunauer-Emmett-Teller (BET) specific surface area and charge–discharge tests. The results showed that the samples prepared by modified Pechini method caclined at 900 °C for 10 h were indexed to pure LiNi_1/3Co_1/3Mn_1/3O₂ with well hexagonal structure. The particle size was in a range of 100–300 nm. The specific surface area was larger than that of the as-obtained sample by Pechini method. Initial discharge capacity of 163.8 mAh/g in the range 2.8–4.4 V (vs. Li/Li⁺) and at 0.1C for LiNi_1/3Co_1/3Mn_1/3O₂ prepared by modified Pechini method was obtained, higher than that of the sample prepared by Pechini method (143.5 mAh/g). Moreover, the comparison of electrochemical results at different current rates indicated that the sample prepared by modified Pechini method exhibited improved rate capability.     

The influence of Li sources on physical and electrochemical properties of LiNi<Subscript>0.5</Subscript>Mn<Subscript>1.5</Subscript>O<Subscript>4</Subscript> cathode materials for lithium-ion batteries

LiNi_0.5Mn_1.5O₄ cathode materials were successfully prepared by sol–gel method with two different Li sources. The effect of both lithium acetate and lithium hydroxide on physical and electrochemical performances of LiNi_0.5Mn_1.5O₄ was investigated by scanning electron microscopy, Fourier transform infrared, X-ray diffraction, and electrochemical method. The structure of both samples is confirmed as typical cubic spinel with Fd3m space group, whichever lithium salt is adopted. The grain size of LiNi_0.5Mn_1.5O₄ powder and its electrochemical behaviors are strongly affected by Li sources. For the samples prepared with lithium acetate, more spinel nucleation should form during the precalcination process, which was stimulated by the heat released from the combustion of extra organic acetate group. Therefore, the particle size of the obtained powder presents smaller average and wider distribution, which facilitates the initial discharge capacity and deteriorates the cycling performance. More seriously, there exists cation replacement of Li sites by transition metal elements, which causes channel block for Li ion transference and deteriorates the rate capability. The compound obtained with lithium hydroxide exhibits better electrochemical responses in terms of both cycling and rate properties due to higher crystallinity, moderate particle size, narrow size distribution and lower transition cation substitute content.     

Preparation and structural characterization of nanosized BiFe<Subscript>0.6</Subscript>Mn<Subscript>0.4</Subscript>O<Subscript>3</Subscript> as a novel material with high sensitivity towards LPG

Nanocrystalline BiFe_0.6Mn_0.4O₃ powders were synthesized by sol–gel citrate method and studied for gas sensing behavior to reducing gases such as LPG, CO, CH₄ and NH₃. The composition and the structure of the powders have been investigated by means of XRD and TEM. The result shows that the BiFe_0.6Mn_0.4O₃ powders have a rhombohedral distorted perovskite structure with an average crystallite size of 35–40 nm. The BiFe_0.6Mn_0.4O₃-based LPG sensor shows better sensitivity at an operating temperature of 250 °C. The dispersion of Pd on BiFe_0.6Mn_0.4O₃ in the ratio of 0.8 wt.% improved the sensitivity, selectivity and response time. In addition, it reduced the operating temperature from 250 to 210 °C for LPG sensor. The response time for LPG was less than 1 min.     

The effect of nanolayer AlF<Subscript>3</Subscript> coating on LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> cycle life in high temperature for lithium secondary batteries

The surface of the spinel LiMn₂O₄ was coated with AlF₃ by a chemical process to improve its electrochemical performance at high temperatures. The morphology and structure of the original and AlF₃-coated LiMn₂O₄ samples were characterized by X-ray diffraction (XRD), transmission electron microscope (TEM). All the samples exhibited a pure cubic spinel structure without any impurities in the XRD patterns. It was found that the surfaces of the original LiMn₂O₄ samples were covered with a nanolayer AlF₃ after the treatment. The charge/discharge of the materials were carried at 220 mA/g in the range of 3.0 and 4.4 V at 55°C. While the original LiMn₂O₄ showed 17.8% capacity loss in 50 cycles at 55°C, the AlF₃-coated LiMn₂O₄ (118.1 mA h/g) showed only 3.4% loss of the initial capacity (122.3 mA h/g) at 55°C. It is obvious that the improvement in cycling performance of the coated-LiMn₂O₄ electrode at 55°C is attributed to the presence of AlF₃ on the surface of LiMn₂O₄. Published in Russian in Elektrokhimiya, 2009, Vol. 45, No. 7, pp. 817–819. The article is published in the original     

锰源对燃烧法制备5V级正极材料LiNi0.5Mn1.5O4的影响

以硝酸锰和醋酸锰,采用蔗糖燃烧法制备锂离子电池正极材料LiNi0.5Mn1.5O4通过XRD、SEM、粒径分布测试、循环伏安、恒流充放电测试以及交流阻抗等方法,研究了醋酸锰和硝酸锰对产物的结构、形貌、粒径及电化学性能的影响。XRD测试结果表明样品的结构都为立方尖晶石型,属于Fd3m空间群。不同的锰源对材料的粒径及粒径分布有很大的影响。以醋酸锰为原料制得的材料的粒径较小并且分布更均匀,有利于锂离子的脱出和嵌入从而提高电化学性能。以醋酸锰为锰源制得的LiNi0.5Mn1.5O4在3.6~5.2 V的充放电电压范围内的电化学性能更好,1C(1C=140.0 mA.g-1)倍率的首次放电容量为144.5 mAh.g-1,循环100周后容量保持率为96%,在3C,5C,10C以及20C的放电容量分别为136.3,132.0,124.7以及96.6 mAh.g-1。     

Synthesis and characterization of submicron size particles of LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> by microemulsion route

Among the various positive electrode materials investigated for Li-ion batteries, spinel LiMn₂O₄ is one of the most important materials. Small particles of the active materials facilitate high-rate capability due to large surface to mass ratio and small diffusion path length. The present work involves the synthesis of submicron size particles of LiMn₂O₄ in a quaternary microemulsion medium. The precursor obtained from the reaction is heated at different temperatures in the range from 400 to 900 °C. The samples heated at 800 and 900 °C are found to possess pure spinel phase with particle size <200 nm, as evidenced from XRD, SEM, and TEM studies. The electrochemical characterization studies provide discharge capacity values of about 100 mAh g⁻¹ at C/5 rate, and there is a moderate decrease in capacity by increasing the rate of charge–discharge cycling. Studies also include charge–discharge cycling and ac impedance studies in temperature range from −10 to 40 °C. Impedance data are analyzed with the help of an equivalent circuit and a nonlinear least squares fitting program. From temperature dependence of charge-transfer resistance, a value of 0.62 eV is obtained for the activation energy of Mn³⁺/Mn⁴⁺ redox process, which accompanies the intercalation/deintercalation of the Li⁺ ion in LiMn₂O₄.     

Synthesis and electrochemical properties of high-voltage LiNi0.5Mn1.5O4 electrode material for Li-ion batteries by the polymer-pyrolysis method

A submicron LiNi_0.5Mn_1.5O₄ cathode was synthesized via the pyrolysis of polyacrylate salts as precursor polymerized by reaction of the metal salts with acrylate acid. The structure and morphology of the resulting compound was characterized by powder X-ray diffraction (XRD) and transmission electron microscopy (TEM). The results reveal that the prepared LiNi_0.5Mn_1.5O₄ cathode material has a pure cubic spinel structure and submicron-sized morphology even if calcined at 900 °C and quenched to room temperature. The LiNi_0.5Mn_1.5O₄ electrodes exhibited promising high-rate characteristics and delivered stable discharge capacity (90 mAh/g) with excellent retention capacity at the current density of 50 mA/g between 3.5 and 4.9 V. The capacity of the LiNi_0.5Mn_1.5O₄ electrodes remains stable even after 30 cycles at low or high current density. This polymer-pyrolysis method is simple and particularly suitable for preparation of the spinel LiNi_0.5Mn_1.5O₄ cathode material compared to the conventional synthesis techniques.     

Glycine-assisted combustion synthesis and electrochemical behavior of LiNi<Subscript>0.5</Subscript>Mn<Subscript>0.5</Subscript>O<Subscript>2</Subscript> nanoparticles under microwave irradiation

Layered LiNi_0.5Mn_0.5O₂ nanoparticles have been successfully prepared by the glycine-assisted combustion method under microwave irradiation. The exothermic reaction can generate a large quantity of heat rapidly leading to the formation and crystallization of LiNi_0.5Mn_0.5O₂. From the X-ray diffraction and scanning electronic microscopy results, the resulting powders have a well-developed layered structure and average particle-size is about 80 nm. The chemical composition analysis and electrochemical characteristics of the obtained LiNi_0.5Mn_0.5O₂ nanoparticles as cathode material for rechargeable lithium-ion battery were also investigated. The improved electrochemical performances of the layered LiNi_0.5Mn_0.5O₂ nanoparticles might be ascribed to the nanostructure of the powders and the unique combustion synthesis under microwave irradiation.     

High-Temperature X-Ray Diffraction Investigation of the Decomposition Process in Manganese-Gallium Spinel Mn<Subscript>1.5</Subscript>Ga<Subscript>1.5</Subscript>O<Subscript>4</Subscript>

The stability of spinel-type mixed Mn_1.5Ga_1.5O₄ oxide prepared in an inert medium (1000 °C, Ar) is studied by thermogravimetry and high-temperature X-ray diffraction in air in a wide temperature range 30–1000 °C. On heating, reversible decomposition processes of initial spinel are observed. From 30 °C to 600 °C oxygen atoms attach to the surface layer of initial Mn_1.5Ga_1.5O₄ spinel to form a new phase distinct from parent oxide by the oxygen stoichiometry (cation vacancies are formed). The product of decomposition is two oxides: Mn_1.5Ga_1.5O₄ and Mn_1.5–xGa_1.5–x[·]_xO₄. On the contrary, above 600 °C a loss of oxygen occurs, the concentration of cation vacancies decreases in Mn_1.5–xGa_1.5–x[·]_xO₄, and the reverse process of single phase oxide crystallization takes place. At 1000 °C the spinel phase forms again whose composition is similar to that of the initial parent phase Mn_1.5Ga_1.5O₄. On cooling the decomposition of this phase is again observed due to oxygen attachment.     

Mechanism of the Enhanced Electrochemical Properties of LiNi<Subscript>1/3</Subscript>Co<Subscript>1/3</Subscript>Mn<Subscript>1/3</Subscript>O<Subscript>2</Subscript> Cathode Materials by a Pre-Sintering Process

α-NaFeO₂ layered LiNi_1/3Co_1/3Mn_1/3O₂ cathode materials were synthesized by mechanical milling accompanied by the solid phase sintering. The sample exhibited a good crystallinity and layered structure while sintered at 900°C, which can be further improved by adding a pre-sintering process at 500°C before high temperature sintering. The sample with a pre-sintering process presents an average particle size about 0.6 μm, and a hexagonal crystalline structure. The optimally fabricated sample showed a first charge capacity of 210.2 mA h/g, discharge capacity of 171.2 mA h/g with a current rate of 0.2 C within the voltage range of 2.7~4.5 V. With increasing the current rate to 1 C, the charge–discharge capacity faded quickly during the cycling process, which can be partially recovered while operated at a low current rate. However, the capacity fading at a current rate of 2 C was largely irreversible. The evolution of the surface chemical states was evaluated using X-ray photoelectron spectroscopy on the charged and discharged samples to understand the high rate capacity fading.     

Hydrothermal synthesis,structure and photocatalytic property of nano-TiO<Subscript>2</Subscript>-MnO<Subscript>2</Subscript>

TiCl₄ and MnSO₄· H₂O as raw materials are hydrolyzed stiochiometrically, following the intermediate of oxide hydrating reacts at 150°C, 0.5 MPa in high-pressure reactor, after filtering, washing and drying, nanometric TiO₂-MnO₂ (Ti_1-X Mn _X O₂) is prepared. The effects of the reaction temperature and time on nanometric TiO₂-MnO₂ are also discussed. XRD shows that the product is TiO₂-MnO₂ with amorphous phase. After being sintered at above 780 °C, it transfers into Ti_1-X Mn _X O₂ with a rutile structure. TEM shows that TiO₂-MnO₂ is the spherical particle. And the average diameter of the particles is 20 nm. The optical absorbance was determined by UV-265 spectrophotometer after dispersing the sample in the mixture of water and glycerol with the ratio of 1 : 1 equably. It is found that the nano-material possesses the advantages of both nano-TiO₂ and nano-MnO₂, and it has strong absorption in the UV and visible region. Photodegradation of dyes in an aqueous solution is investigated using nanometricTiO₂-MnO₂ as a photocatalyst. The results show that after 60 min illumination, the decolorization rate of the acidic red B and acidic black 234 dye can be as high as 100%.     

Preparation of Ca<Subscript>3</Subscript>Co<Subscript>4</Subscript>O<Subscript>9</Subscript> by polyacrylamide gel processing and its thermoelectric properties

Ca₃Co₄O₉ powder was prepared by a polyacrylamide gel route in this paper. The effect of the processing on microstructure and thermoelectric properties of Ca₃Co₄O₉ ceramics via spark plasma sintering were investigated. Electrical measurement shows that the Seebeck coefficient and conductivity are 170 μV/K and 128 S/cm, respectively, at 700 °C, yielding a power factor value of 3.70 × 10⁻⁴ W m⁻¹ K⁻² at 700 °C, which is larger than that of Ca₃Co₄O₉ ceramics via solid-state reaction processing. The polyacrylamide gel processing is a fast, cheap, reproducible and easily scaled up chemical route to improve the thermoelectric properties of Ca₃Co₄O₉ ceramics by preparing the homogeneous and pure Ca₃Co₄O₉ phase.     

Comparative study of the synthesis of CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript> and NiFe<Subscript>2</Subscript>O<Subscript>4</Subscript> in silica through the polymerized complex route of the sol–gel method

In this work the synthesis of CoFe₂O₄-SiO₂ and NiFe₂O₄-SiO₂ nanocomposites was studied via the sol–gel method, using the polymerized complex route. The polymerized precursors obtained by the reaction of citric acid, ethylene glycol, tetraethylorthosilicate, ferric nitrate, and cobalt nitrate or nickel chloride were characterized by nuclear magnetic resonance (NMR) and infrared (IR) spectroscopy. NMR and IR spectra of the precursors, without and with metallic ions, show the formation of polymeric chains with ester and ether groups and complexes of metal-polymeric precursor. The nanocomposites were obtained by the thermal decomposition of the organic fraction and characterized by X-ray diffraction (XRD) and vibrating sample magnetometry (VSM). XRD patterns show the formation of CoFe₂O₄ and NiFe₂O₄ in an amorphous silica matrix above 400 °C in both cases. When the calcination temperature was 800 °C the particle size of the crystalline phases, calculated using the Scherrer equation, reached ∼35 nm for the two oxides. VSM plots show the ferrimagnetic behavior that is expected for this type of magnetic material; the magnetization at 12.5 KOe of the CoFe₂O₄-SiO₂ and NiFe₂O₄-SiO₂ compounds was 29.5 and 17.4 emu/g, respectively, for samples treated at 800 °C.     

Comprehensive reinvestigation on the initial coulombic efficiency and capacity fading mechanism of LiNi0.5Mn1.5O4 at low rate and elevated temperature

The effect of different membranes and aluminum current collectors on the initial coulombic efficiency of LiNi_0.5Mn_1.5O₄/Li was investigated, and the cycling performance at different rates and temperatures and the storage performance at 60 °C for a week are discussed for LiNi_0.5Mn_1.5O₄/Li. The results show that the lower initial coulombic efficiency is associated with the lower decomposition voltage of the commercial membrane and electrolyte, and the instability of aluminum current collector under the higher voltage. In addition, both versions of LiNi_0.5Mn_1.5O₄ can deliver about 115 mA?h g^?1 of initial discharge capacity at 1 C at 25 °C and 60 °C; however, it retains only 61.57 % of its initial capacity after the 130th cycles at 60 °C, which is much lower than the 94.46 % rate observed for LiNi_0.5Mn_1.5O₄ at 25 °C, and the cycling performance of the material at 1 C is better than that at 0.5 C. Meanwhile, the initial discharge capacity at 0.1 C after storing at 60 °C is 119.3 mA?h g^?1, which is only a little lower than 121.5 mA?h g^?1 recorded before storing; moreover, the spinel structure and surface state of LiNi_0.5Mn_1.5O₄ after storing at 60 °C has not been changed basically. These results indicate that the electrochemical stability of electrolyte is also related to the temperature. The serious capacity fading of LiNi_0.5Mn_1.5O₄ at 60 °C is attributed to the severe oxidation decomposition and the thermal decomposition in the range of cut-off voltage of the materials, and then the decomposition products interact with active materials to form a solid interface phase, leading to the larger electrode polarization and irreversible capacity loss. Meanwhile, the worse cycling performance at 0.5 C than that at 1 C is attributed to the longer interaction time between the electrolyte and the active materials. However, the storage performance of LiNi_0.5Mn_1.5O₄ corresponds to the thermal stability of electrolyte to a certain extent.     

Thermal oxide synthesis and characterization of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanorods and Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> nanowires

Fe₃O₄ nanorods and Fe₂O₃ nanowires have been synthesized through a simple thermal oxide reaction of Fe with C₂H₂O₄ solution at 200–600°C for 1 h in the air. The morphology and structure of Fe₃O₄ nanorods and Fe₂O₃ nanowires were detected with powder X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The influence of temperature on the morphology development was experimentally investigated. The results show that the polycrystals Fe₃O₄ nanorods with cubic structure and the average diameter of 0.5–0.8 μm grow after reaction at 200–500°C for 1 h in the air. When the temperature was 600°C, the samples completely became Fe₂O₃ nanowires with hexagonal structure. It was found that C₂H₂O₄ molecules had a significant effect on the formation of Fe₃O₄ nanorods. A possible mechanism was also proposed to account for the growth of these Fe₃O₄ nanorods. Supported by the Fund of Weinan Teacher’s University (Grant No. 08YKZ008), the National Natural Science Foundation of China (Grant No. 20573072) and the Doctoral Fund of Ministry of Education of China (Grant No. 20060718010)     

Comparison of structure and electrochemical properties for 5 V LiNi0.5Mn1.5O4 and LiNi0.4Cr0.2Mn1.4O4 cathode materials

Spinel LiNi_0.5Mn_1.5O₄ and LiMn_1.4Cr_0.2Ni_0.4O₄ cathode materials have been successfully synthesized by the sol–gel method using citric acid as a chelating agent. The structure and electrochemical performance of these as-prepared powders have been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and the galvanostatic charge–discharge test in detail. XRD results show that there is a small Li _y Ni_1-y O impurity peak placed close to the (4 0 0) line of the spinel LiNi_0.5Mn_1.5O₄, and LiMn_1.4Cr_0.2Ni_0.4O₄ has high phase purity, and the powders are well crystallized. SEM indicates that LiMn_1.4Cr_0.2Ni_0.4O₄ has a slightly smaller particle size and a more regular morphological structure with narrow size distribution than those of LiNi_0.5Mn_1.5O₄. Galvanostatic charge–discharge testing indicates that the initial discharge capacities of LiMn_1.4Cr_0.2Ni_0.4O₄ and LiNi_0.5Mn_1.5O₄ cycled at 0.15 C are 129.6 and 130.2 mAh g⁻¹, respectively, and the capacity losses compared to the initial value, after 50 cycles, are 2.09% and 5.68%, respectively. LiMn_1.4Cr_0.2Ni_0.4O₄ cathode has a higher electrode coulombic efficiency than that of the LiNi_0.5Mn_1.5O₄ cathode, implying that Ni and Cr dual substitution is beneficial to the reversible intercalation and de-intercalation of Li⁺.     

Dry Potassium-Based Sorbents for CO<Subscript>2</Subscript> Capture

Dry potassium-based sorbents were prepared by impregnation with potassium carbonate on supports such as activated carbon (AC), TiO₂, Al₂O₃, MgO, CaO, SiO₂ and various zeolites. The CO₂ capture capacity and regeneration property of various sorbents were measured in the presence of H₂O in a fixed bed reactor, during multiple cycles at various temperature conditions (CO₂ absorption at 50–100 °C and regeneration at 130–400 °C). The KAlI30, KCaI30, and KMgI30 sorbents formed new structures such as KAl(CO₃)₂(OH)₂, K₂Ca(CO₃)₂, K₂Mg(CO₃)₂, and K₂Mg(CO₃)₂·4(H₂O), which did not completely convert to the original K₂CO₃ phase at temperatures below 200 °C, during the CO₂ absorption process in the presence of 9 vol.% H₂O. In the case of KACI30, KTiI30, and KZrI30, only a KHCO₃ crystal structure was formed during CO₂ absorption. The formation of active species, K₂CO₃·1.5H₂O, by the pretreatment with water vapor and the formation of the KHCO₃ crystal structure after CO₂ absorption are important factors for absorption and regeneration, respectively, even at low temperatures (130–150 °C). In particular, the KTiI30 sorbent showed excellent characteristics with respect to CO₂ absorption and regeneration in that it satisfies the requirements of a large amount of CO₂ absorption (87 mg CO₂/g sorbent) without the pretreatment with water vapor, unlike KACI30, and a fast and complete regeneration at a low temperature condition (1 atm, 150 °C). In addition, the higher total CO₂ capture capacity of KMgI30 (178.6 mg CO₂/g sorbent) than that of the theoretical value (95 mg CO₂/g sorbent) was explained through the contribution of the absorption ability of MgO support. In this review, we introduce the CO₂ capture capacities and regeneration properties of several potassium-based sorbents, the changes in the physical properties of the sorbents before/after CO₂ absorption, and the role of water vapor and its effects on CO₂ absorption.