丝素膜修饰电极pH电荷选择效应的研究

研究了丝素膜的带电特性,其等电点在pH4.5附近,利用丝系膜在等电点前后的两性荷电特性和电荷之间的静电作用,研制了丝素膜修饰石墨电极,多巴胺在膜中的表观扩散系数为2.65×10^-7cm^2/s,其电极反应异相电子转移速率常数为8.9×10^-6cm/s,电极用于神经递质类化合物体系的测定中,验证了此修饰电极的pH电荷选择效应。     

细胞色素c在微带金电极上的直接电化学

报道了一种新的促进剂4,6-二甲基-2-巯基嘧啶(DMMP)对细胞色素c(Cyt.c) 电化反应的促进作用,用红外光谱和光电子能对DMMP 在金电极表面形成的单分子膜进行了表征.循环伏安实验表明Cyt.c在DMMP修饰微电极上能发生准可逆的电化学反应,异相电子传递速率常数K~5为6.6×10^-^3cm/s,对DMMP修饰膜的稳定性进行了考察;讨论了Cyt.c发生电化学反应的异相电子传递速率常数K~5受电极, 表面促进剂的修饰量以及空气中氧影响的机理.     

辅酶Q在CPT自组装修饰电极上的电化学行为及其分析应用

采用自组装方法制备了卡托普利(CPT)修饰电化学传感器,并对其在金电极表面形成的单分子膜进行了表征。循环伏安试验结果表明,辅酶Q在CPT修饰电极上能发生准可逆的电化学反应。该传感器对辅酶Q测定具有良好的响应,测定范围为5.0×10-6~6.0×10-5mol.L-1,检出限为2.0×10-6mol.L-1,异相电子传递速率常数ks为5.4×10-3cm.s-1。对CPT修饰膜的稳定性进行考察,讨论辅酶Q发生电化学反应的异相电子传递速率常数ks及其影响机制。     

酪氨酸电化学行为研究及其动力学参数的测定

本文以玻碳为工作电极用循环伏安法研究了在0.50mol/L NaClO_4—B.R.缓冲溶液中酪氨酸的氧化行为及吸附;用计时电流法测定了扩散系数;用线性扫描伏安法测定了电子传递系数;分别用线性扫描伏安法和旋转园盘电极法测定了异相反应速度常数.     

基于针状二氧化钛纳米膜的人类肝癌细胞过氧化氢的检测

同济大学化学系田阳课题组研究了基于高导电性针状TiO1纳米膜的细胞色素C（cyt c）直接电子传递，并构筑了新型H2O2传感器，成功地应用于人类肝癌细胞H2O2的检测（Anal．Chem．Doi：1．1021 ac802721x）。研究表明：高导电的针状TiO2纳米膜可以促进了氧化还原酶与电极间的电子传递，采用cyt c作为研究模型，发现其异相电子传递速率常数（ks）为（13．8±2．1）s^-1。     

抗坏血酸在普鲁士蓝薄膜修饰电极上的电催化氧化

本文详细研究了普鲁士蓝(PB)薄膜本身电荷传输过程的动力学及PB 薄膜催化抗坏血酸(AH2)电氧化的动力学。 用电位阶跃计时电流法和计时电量法, 恒电流计时电位法测得PB膜中电荷传输表观扩散系数Dct平均为2.62×10ˉ10cm2·sˉ1; 用RDE法测得AH2在PB薄膜上催化氧化的速率常数为1.23×10^8cm3·molˉ1·sˉ1。催化反应对AH2为一级。 只发生在PB薄膜与溶液的界面上。 整个催化过程受到溶液中的传质、膜内部的电荷传输及膜与溶液界面上交叉反应三种因素单独或联合控制, 实际出现四种动力学情况。     

聚乙烯醇微透镜阵列的制备及其固载细胞色素c的直接电化学

利用自组装法以聚苯乙烯有序多孔膜为膜板制备聚乙烯醇微透镜阵列膜.在pH6.89的磷酸盐(PBS)缓冲溶液中,固载在聚乙烯醇微透镜阵列膜修饰的玻碳电极上的细胞色素c于0.072V(vs·Ag/AgCl)处显示一对准可逆的氧化还原峰,是细胞色素c血红素辅基Fe(Ⅲ)/Fe(Ⅱ)电对的特征峰.考察了扫速、溶液pH及支持电解质浓度等因素对细胞色素c电子传递的影响,体系的表观异相电子传递速率常数k0为2.98×10-6cm·s-1.     

普鲁士蓝膜修饰电极的电化学阻抗谱

测量了应用电化学方法制备的不同厚度的普鲁士蓝膜修饰电极的循环伏安行为与电化学阻抗谱.由所得到的循环伏安图讨论了普鲁士蓝修饰膜的氧化还原过程,并对相关的Nyquist图进行了解析,提出了相应的等效电路.在此基础上计算出较薄膜中普鲁士蓝/普鲁士白电化学反应的表观速率常数和表观扩散系数,讨论了膜厚度对电荷扩散的影响.当膜相对较薄时,电极过程主要由动力学过程控制;当膜达到一定厚度时,电荷在膜中的扩散速率受到限制,电极过程由动力学过程和电荷扩散过程共同控制,证实了文献报导的普鲁士蓝膜修饰电极为多层空间分布电荷传递模型.     

煤焦催化HCN还原NO的反应机理

通过量子化学密度泛函理论研究了均相和煤焦催化的HCN还原NO反应机理,计算了反应动力学参数。结果表明,均相还原反应的活化能为306 kJ/mol,而煤焦催化的NO还原反应的活化能为136 kJ/mol。典型再燃温度1 400 K下,HCN异相还原NO的反应速率略小于煤焦异相还原NO的反应速率;HCN参与下的煤焦异相还原NO反应较CO参与下的煤焦异相促还原NO反应更易发生。各组分的吸附顺序对HCN异相还原NO的反应有明显的影响;在典型再燃温度下,NO先吸附时煤焦表面的异相还原反应速率常数为5.28×10~(10),比HCN先吸附时最快反应路径的反应速率常数大一个数量级。煤焦对NO还原具有显著的催化作用;煤焦表面作为NO的还原反应位点,对反应气体具有明显的活化作用。     

多巴胺在2-氨基-5-巯基-[1,3,4]三氮唑自组装膜电极上的准可逆行为研究及分析应用

利用新合成的巯基试剂2-氨基-5-巯基-[1，3，4]三氮唑在金电极表面进行了首次自组装，用电化学法和扫描电子显徽镜对自组装膜电极进行了表征。研究了多巴胺在该自组装膜电极上的电化学行为，发现该自组装膜能有效促进多巴胺在电极与溶液之间的电子传递．表现为二电子传递的准可逆行为，电极反应速率常数为0．105cm／s。该自组装膜电极用于多巴胺注射液含量的测定，结果满意。     

石墨炉原子吸收光谱无标样分析法的研究：Ⅳ.实际样品的分析

以有机基体改进剂、管壁原子化、热解涂层石墨管、峰面积积分吸收信号、Ｄ２灯或Ｚｅｅｍａｎ效应扣除背景，有效地控制和消除了海水基体对Ｃｄ，Ｃｏ，Ｃｒ，ＣｕＭｎ，ＮｉＰｂ等元素的干扰。在此前提下，用ＧＦＡＡＳ无标样分析汉分析了实验海水样品中的痕量元素，与极谱法及间接火焰原子吸收法测得的结果相符，测得质控海水样品的结果与标准值亦很吻合，而且检出限和回收率都达达到要求。     

Decontamination of chemical warfare agents using perchloroethylene–Marlowet IHF–H2O-based microemulsions: wetting and extraction properties on realistic surfaces

At the present time, considerable efforts are being made to develop new media for the decontamination of a variety of toxic compounds. In the present contribution, new microemulsions with promising properties are presented. Moreover, the decontamination of surfaces, with an emphasis on varnished metal surfaces of exterior and interior equipment, is investigated using these microemulsions. Studies of the phase behavior of the system water–perchloroethylene–IHF–2-propanol are reported and the microemulsion phases are recognized. The wetting behavior on contaminated surfaces and the extraction capabilities with respect to contaminants are essential for an efficient decontamination. Hence, suitable microemulsions are identified on the basis of these properties. The decontamination efficiency of these microemulsions is first estimated on the basis of the ability to wet typical chemical nonresistant varnished steel sheets, which are authentic model systems for real surfaces. Afterwards, promising microemulsions and, as reference, different solvents are tested with respect to their capability to solubilize sulfur-mustard agent, again using realistic surfaces contaminated with this chemical warfare agent. Several microemulsions are found, which have the desired properties.     

Alternate multi-layered adsorption of macro-cations and -anions on the colloidal spheres. Influence of the deionization of the complexation mixtures with coexistence of the ion-exchange resins

The alternate multiple adsorption layers of macrocations and macroanions on the surfaces of colloidal spheres, in which the complexation mixtures are deionized with ion-exchange resins are studied with help of the electrophoretic light-scattering, dynamic light-scattering and transmitted electron-microscopy techniques. The results are compared with those without resins. Colloidal silica spheres (110 nm in diameter) and monodispersed polystyrene spheres (220 nm) are used as colloidal spheres. The macrocations used are poly (4-vinyl-N-n-butyl pyridinium bromide) and poly (allylamine hydrochloride). Sodium poly (styrene sulfonate) and sodium polyacrylate are used as macroanions. The macroion-colloid complexations are formed firmly when the complexation suspensions are deionized with the resins.     

New concepts for regio- and stereoselective bis- and triscyclopropanations of C60

The synthesis of isomerically multiple adducts of C(60) with a defined three-dimensional structure is still one of the most challenging tasks of exohedral fullerene chemistry. The inherent regioselectivity of successive additions of addends such as malonates to the fullerene's [6,6]-double bonds is only moderate. In most cases difficult-to-isolate mixtures of regioisomers are obtained. The regioselectivity can be significantly improved if multifunctional addends able to undergo two or more additions are allowed to react with C(60). Preorganization and minimization of strain energy within the addend skeleton reduce the number of sterically allowed addition patterns. Improved concepts for highly regio- and stereoselective bis- and triscyclopropanations of C(60) are described. Two examples of the bisadditions with complete regioselectivity leading to trans-2- and cis-2 are presented. Here, the two malonate binding sites are linked by rigid tetraphenylporphyrin and calix-[4]-arene spacers. Selective trisadditions were achieved with the easy-to-synthesize and easy-to-modify tripodal addends 5-7, where the malonates are held together by a focal aryl moiety. Another very elegant approach for bis- and trisadditions involves cyclo-[n]-alkylmalonates. Selection between addition patterns with and without rotational axes is possible by choosing the right combinations of the flexible alkyl chains connecting the malonates. If alkyl chains of identical lengths are used bis- and trisadducts such as 19-21 and 25 with rotational symmetry are formed with high regioselectivity. These addition patterns are avoided if cyclo-[n]-malonates containing alkyl chains of different lengths are employed. In this case adducts such as 26 and 27 with C(s)-symmetry are formed. The use of the chiral cyclo-[3]-malonate 28 allows for the regio- and stereoselective synthesis of the enantiomerically pure e,e,e-trisadducts 29 and 30 containing an inherently chiral addition pattern with C(3)-symmetry.     

肝中杀鼠迷和杀鼠灵的固相萃取紫外导数光谱检测法

肝匀浆用少量二甲基酰胺浸提,加６％高氯酸稀释,上清液通过ＧＤＸ３０１大孔树脂萃取,二氯甲烷洗脱,挥去洗脱液中溶剂,稀酸溶解剩余物,用酸液的二阶导数光谱检测杀鼠剂。     

Spot-test detection of aryl hydrazines, hydrazones, osazones, oximes and aromatic amines

Arylhydrazines are detected by oxidation with N-bromosuccinimide and coupling with resorcinol to form azo-dyes which are intensely coloured in alkaline media. Hydrazones and osazones are hydrolysed to form the arylhydrazines, which are then tested for 4-Nitro- and 2,4-dinitrophenylhydrazines are tested for by forming their hydrazone with salicylaldehyde and adding alkali to produce a violet colour. The hydroxylamine formed by the hydrolysis of oximes is oxidized by iodine monochloride in the presence of sulphanilic acid; coupling with 8-hydroxyquinoline forms a dye that is red in alkali. Intense colours are immediately produced when primary, secondary and tertiary aromatic amines are mixed with diacetoxyiodobenzene. All the tests are sensitive and appear to be specific.     

Fast,high precision fingerprinting of fatty acids in milk

A rapid, precise method has been developed for the determination of the fatty acid profile of small samples of milk fat. Lipids are extracted from milk with n-hexane, triglycerides are trans-esterified with sodium methoxide, and free fatty acids are esterified with methanolic hydrochloric acid. The methyl esters are separated on a narrow-bore, 5% phenyl polydimethylsiloxane capillary column. The fatty acid profile is precise: for the various acids the coefficients of variation of peak area are between 6.7% and 9.7%, with a mean of 8.1%, and the coefficients of variation of peak percentage area are between 0.3% and 5.5% with a mean of 1.8%. The nature of the sample preparation procedure does not limit throughout.     

Surface Reconstruction by a Coassembly Approach

Materials with switchable surfaces, capable of changing surface properties under external stimuli, are playing a pivotal role in many applications, such as tissue engineering, biosensors, and drug/protein delivery. In this research silica particles with patterned and switchable surfaces are fabricated. Surface micelles on silica particles are formed by coassembly of polymer brushes and “free” block copolymer chains in a selective solvent. The cores of the surface micelles are crosslinked by anthracene photodimerization. After quaternization of the coronae, amphiphilic surface micelles are prepared. The surface micelles are able to rearrange in different media. After treatment with an organic solvent, the surfaces of silica particles are occupied by hydrophobic polymer components; in aqueous solution, the positively charged polymer chains are on the surfaces. The switching of the surface micelles results in changes in surface composition and wetting behaviors.     

Reactivity Ratios of Diethyldiallylammonium Chloride with Acrylamide or Acrylic Acid

The compositions of copolymers of diethyldiallylammonium chloride (DEDAAC) with acrylamide (AM), acrylic acid (AA) or sodium acrylic acid (NaAA) at low conversion were determined by elemental analysis, and the reactivity ratios of monomers in copolymerization were obtained by Kelen-Tudos method. The results showed that the reactivity ratios rDE and rAM are 0.31 and 5.27 for DEDAAC with AM, rDE and rAA are 0.28 and 5.15 for DEDAAC with AA, and rDE and rNaAA are 0.40 and 3.97 for DEDAAC with NaAA, respectively. The copolymerizations for DEDAAC with AM, AA or NaAA are non-ideal copolymerization and the products are random copolymers.     

含有金属-金属键的双核原子簇离子体系[Mo~2Sn]^2-(n=6~9)的电子结构与电子光谱

使用SCF-CI方法研究了含有Mo-Mo单键的原子簇离子体系[Mo~2Sn](n=6~9)的电子结构及电子光谱。讨论了随n增加, 配体S, S~2, S~4对Mo-Mo键序、原子电荷的影响及其变化规律。分析了原子簇离子中的d-d相互作用能级次序及Mo-Mo, Mo-S'~t等键的性质, CI计算得到的谱带波数及强度次序与实验符合。指认分析表明, 谱带的跃迁性质是有趣的, 如第一吸收带为成键轨道之间的跃迁σ~x^2-y^2→σ~x~2(n=6~8), 同时, 对电子跃迁的性质进行了分类, 对谱带的电荷转移性质也进行了讨论。