Nanodiamond tethered epoxy/polyurethane interpenetrating network nanocomposite: Physical properties and thermoresponsive shape-memory behavior

In this study, a novel blend of polyurethane and diglycidyl 1,2-cyclohexanedicarboxylate epoxy was prepared and reinforced with various content of functional nanodiamond (0.1–5 wt%). According to morphological analysis, diglycidyl 1,2-cyclohexanedicarboxylate/polyurethane/nanodiamond nanocomposite revealed beaded-twine network structure due to entrapment of nanodiamond aggregates into epoxy/polyurethane interpenetrating networks. Exclusive self-assembled nanodiamond-tethered interpenetrating network was due to physical inter-linking of nanodiamond with blend components. There was a 47% rise in tensile strength and an 80% increase in Young’s modulus of diglycidyl 1,2-cyclohexanedicarboxylate/polyurethane/nanodiamond 5 nanocomposite relative to neat polymer. The original shape of diglycidyl 1,2-cyclohexanedicarboxylate/polyurethane/nanodiamond 5 was 95% recovered using heat-induced shape-memory effect.     

Synthesis and properties of conducting organic/inorganic polyurethane hybrids

A series of polyurethane/polyaniline/silica organic/inorganic hybrids were synthesized via the conventional polyurethane (PU) prepolymer technique. Amine-endcapped polyaniline (PANI) with low molecular weight and higher solubility was firstly synthesized. This PANI oligomer was then used together with nano-silica bearing silanol groups as chain extenders to prepare the conducting polyurethane hybrids. The polyurethane hybrids were designated as PU-xPANI-ySiO₂ (x + y = 1). For comparison, the urethane-aniline block copolymer and the PU/silica hybrid were designated as PU-PANI and PU-SiO₂, respectively.The structures of PU-PANI, PU-SiO₂ and conducting polyurethane hybrids were confirmed by FT-IR, solid-state ¹³C, and ²⁹Si NMR spectra. In nano-silica containing organic/inorganic conducting polyurethane hybrids, UV-vis spectra revealed the maximum absorption bands similar to that of PU-PANI. X-ray diffraction patterns indicated that these samples are typical of semicrystalline/amorphous materials. SEM image of PU-0.5PANI-0.5SiO₂ showed that PANI was dispersed homogeneously and interconnected continuously in the insulating PU-silica matrix. TGA results of the polymer hybrids exhibited higher thermal stabilities and lower decomposition rates than that of PU-PANI both in nitrogen and air. Differential scanning calorimetry (DSC) studies indicated that the polyurethane hybrids had higher glass-transition temperatures (T_g) with the increase of PANI, but lower than that of PU-PANI. Stress-strain curves for all of the polyurethane hybrids showed the elastomeric behavior of typical polyurethanes. The surface resistivity values of all hybrids were about 10⁸ ∼ 10¹⁰ Ω/sq. and might meet the requirement of the anti-electrostatic materials.     

Thermal properties of polyamide 6/polyurethane blends

Equilibrium melting temperatures and crystallization parameters of polyamide 6/polyurethane blends were investigated. Thermal properties of the crystalline phase of blends obtained from polyamide 6 and polyurethane containing 40 wt% of hard segments, are only limited influenced by the overall blend compositon. Because from separate measurements single glass transitions for all samples were estimated, so in the investigated case the blending process may occur mainly between amorphous fraction of polyamide 6 and the polyurethane or, what is more probable, the polyurethane phase is dispersed in the continuous polyamide matrix, although some interactions exist.     

阳离子聚氨酯/CeO2纳米复合材料的制备

二氧化铈;阳离子聚氨酯/CeO2纳米复合材料的制备     

The Preparation and Properties of Polyurethane/Nano-CeO<Subscript>2</Subscript> Hybrid Aqueous Coating

To improve the ultraviolet resistance and thermal stability of waterborne polyurethane, stable waterborne polyurethane/nano-cerium oxide hybrid dispersions were obtained by adding nano-cerium colloids to previously synthesized waterborne polyurethane dispersions. The dried ceria colloid was characterized by X-ray diffraction (XRD) and high resolution transmission electron microscopy (HRTEM). The XRD results indicated the prepared CeO₂ was a face-centered cubic structure. The prepared polyurethane/CeO₂ dispersions were studied by dynamic light scattering (DLS), transmission electron microscopy (TEM), UV–Vis spectroscopy and accelerated weathering test. The dried polyurethane/CeO₂ films were characterized using thermogravimetric analysis (TGA). The DLS analysis indicated the particles average diameter of hybrids emulsion was bigger than that of the pure waterborne polyurethane dispersion. TG analysis and accelerated weathering test suggested the hybrid latex films had better thermal stability and mechanical properties than those of the pure waterborne polyurethane. The UV–Vis absorption capacity of the dispersions prepared was increasing with the amount of CeO₂ colloid increased.     

Comparative study between core-shell and interpenetrating network structure polyurethane/polyacrylate composite emulsions

Anionic aqueous polyurethane dispersion was prepared by using carboxyl acid group to make the polyurethane dispersible, and then nanograde core-shell and crosslinked IPN structure polyurethane/polyacrylate composite latex (PUA) were synthesized by soap-free emulsion polymerization method with polyurethane dispersion as seed. FTIR, DSC, dynamic light scattering, TEM, ESCA, TGA, electronic tensile machine were employed to investigate the structures and properties of the composite latex and their polymers. Meanwhile the core-shell composite PUA emulsion and the crosslinked IPN composite PUA emulsion were compared. The results showed that the particle morphology of PUA composite emulsion is inverted core-shell structure with polyacrylate as the core and with polyurethane as the shell. The morphology of the crosslinked PUA emulsion was multi-core structure. The surface in core-shell PUA contains rich PU phase. The phase structure of the crosslinked PUA is more uniform. Three transition temperatures are observed for the core-shell composite PUA, two transitions are observed for the film from the crosslinked PUA. The TGA curves of core-shell PUA and crosslinked PUA exhibit two stages, the first stage corresponds to the thermal decomposition of hard segments in seed polyurethane; the second stage corresponds to the decomposition of soft segments in PUA and decomposition of polyacrylate. With the increase of glycidyl methacrylate (GMA) amounts in PUA composite emulsions, the tensile strength of the PUA films as well as the average diameter of the PUA composite emulsion particles increase, the elongation at break of the PUA films decreases.     

大分子不饱和单体法合成具有核壳结构的丙烯酸酯/聚氨酯乳液及表征

采用丙烯酸酯（AC）对水性聚氨酯（WPU）进行改性,合成了接枝型丙烯酸酯/聚氨酯(PUA)复合乳液。 随着共聚物中丙烯酸酯质量分数的增加,乳液外观由透明变为不透明,乳液粒径随之增大、分布变宽。 TEM显示,PUA乳胶粒子呈现清晰的核壳结构,且形态规整,粒径分布在60~120 nm之间。 FTIR测试表明,随着丙烯酸酯质量分数的增加,聚氨酯(PU)硬段氢键化作用先增强后减弱,硬段的有序度逐渐降低。 DSC分析表明,当AC的质量分数低于75%时,PU、聚丙烯酸酯(PA)两组分相容性较好,只出现一个玻璃化转变温度,并且随着PA质量分数的增加逐渐升高。 PA质量分数的增加,使胶膜的最大热失重速率从363 ℃提高至412 ℃,吸水率从11.3%降低至5.7%,弹性模量从16.4 MPa提高至47.6 MPa,拉伸强度从9.0 MPa提高至23.7 MPa,断裂伸长率从365%提高至408%,同时乳液的粘度下降,干燥时间变短,胶膜的附着力变好。     

Hydrogen bonding,mechanical properties,and surface morphology of clay/waterborne polyurethane nanocomposites

A novel clay/waterborne polyurethane (WPU) nanocomposite was synthesized from polyurethane and saponite organoclay. The clay was organically modified with various swelling agents, the effect of which has been investigated. Hydrogen bonding between organic and inorganic materials was characterized with Fourier transform infrared (FTIR) spectroscopy. The results implied that hydrogen bonding increased when organoclay was added. Mechanical and wear property studies revealed that introducing clay into waterborne polyurethane will enhance the Young's modulus (from 56 to 126 MPa), the maximum stress (from 3.9 to 7.6 MPa), and the elongation at break (from 27.7 to 58.7%) of the nanocomposite by a factor of two, whereas the wear loss will be only one third of the neat waterborne polyurethane. Atomic force microscopy (AFM) was used to analyze the surface morphology of the nanocomposite. An AFM microphotograph showed that the surface of the clay/waterborne polyurethane nanocomposite was smoother when clay was added in waterborne polyurethane. The average roughness (R_a) decreased from 1.00 to 0.12. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1–12, 2005     

聚氨酯/环氧树脂互穿网络聚合物的性能研究

互穿聚合物网络（Interpenetrating polymer net-work,简称IPN）广泛应用的为聚氨酯基的互穿网络聚合物。其合成多集中在弹性体方面。本文用同步法合成的聚氨酯／环氧树脂互穿网络硬质泡沫塑料材料（简称PU／ERIPNF）,机械性能较好,并研究了其动态力学性能及形态变化。     

添加剂对EO/THF共聚醚聚氨酯热氧降解的影响

添加剂对EO/THF共聚醚聚氨酯热氧降解的影响     

Extraction of Mo, W and Tc with polyurethane foam and with cyclic polyether from SCN-/HCL medium

The extraction of molybdenum, tungsten and technetium by polyether-based polyurethane foam and by a cyclic polyether from aqueous thiocyanate solutions is described. The influence of the reductants stannous chloride and ascorbic acid has also been studied. The possibilities of the polyurethane foam for preconcentration and determination of molybdenum are discussed.     

海藻酸钠/水性聚氨酯共混膜的结构表征和性能测试

本文将海藻酸钠与聚酯型水性聚氨酯共混制膜，并通过红外光谱（FTIR）、X射线衍射（XRD）、扫描电镜（SEM）、紫外光谱（UV）、力学性能测试对共混膜的结构和性能进行了表征与测试。结果表明，共混膜中两种分子间存在着强烈的相互作用和良好的相容性，与纯海藻酸钠膜相比共混膜有较高的抗水性和断裂伸长率。     

STUDY ON CASTOR OIL POLYURETHANE/POLY (METHYL METHACRYLATE) AB CROSSLINKED POLYMERS

Castor oil polyurethane/poly(methyl methacrylate) AB crosslinked polymers (ABCP) were synthesized by free radical copolymerization of MMA and vinyl-terminated castor oil polyurethane which was obtained from isocyanate-terminated castor oil polyurethane and hydroxyethyl methacrylate The mechanical properties, transition and relaxation, as well as compatibility and morphology of the ABCP were investigated by changing the component. The results show that the ABCP is a semicompatible system and the compatibility of the two components decreases with increasing content of the hard segment. The mechanical and damping properties of the ABCP are obviously superior to that of their homopolymers. The damping value is mainly controlled by cross[ink density of the ABCP but the T-g value by component.     

Preparation, characterization, and infrared emissivity property of optically active polyurethane/TiO2/SiO2 multilayered microspheres

Optically active polyurethane/titania/silica (LPU/TiO₂/SiO₂) multilayered core–shell composite microspheres were prepared by the combination of titania deposition on the surface of silica spheres and subsequent polymer grafting. LPU/TiO₂/SiO₂ was characterized by FT-IR, UV–vis spectroscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), SEM and TEM, and the infrared emissivity value (8–14 μm) was investigated in addition. The results indicated that titania and polyurethane had been successfully coated onto the surfaces of silica microspheres. LPU/TiO₂/SiO₂ exhibited clearly multilayered core–shell construction. The infrared emissivity values reduced along with the increase of covering layers thus proved that the interfacial interactions had direct influence on the infrared emissivity. Besides, LPU/TiO₂/SiO₂ multilayered microspheres based on the optically active polyurethane took advantages of the orderly secondary structure and strengthened interfacial synergistic actions. Consequently, it possessed the lowest infrared emissivity value.     

Laponite/聚氨酯纳米复合材料制备与性能研究

通过溶剂交换法将无机Laponite从水相转移到N,N-二甲基乙酰胺(DMAC)中,在超声波作用下,Laponite与热塑性聚氨酯(TPU)溶液进行共混复合,Laponite插层到PU分子链间而制备Laponite/聚氨酯纳米复合材料.利用TEM,AFM,TGA,DSC,DMA和静态拉伸对其结构、组成、形貌和性能进行表征,研究结果表明,Laponite优先插层到聚氨酯的硬段中,片层和硬段通过氢键相互作用和尺寸匹配性,进而形成一种插层网络结构.由于这种网络结构的存在,使Laponite/聚氨酯复合材料的强度、硬度及韧性得到同步提高.     

Determination of silicone fluid surfactants in polyurethane/polyether blends by atomic-absorption spectroscopy

A method for the atomic-absorption determination of silicone fluid surfactants present in some polyurethane/polyether blends is described. The silicone fluid in the pure state, or in the presence of polyurethane blend, is diluted with a solvent and sprayed into the nitrous oxide/acetylene flame. The effects of solvent, instrumental conditions, time and presence of the polyurethane blends were investigated. Polyurethane/polyether blends do not interfere with the silicon absorption when the samples are dissolved in aqueous ethanol (1:1) and sprayed into a fuel-rich flame.     

A study on phase morphology and surface properties of polyurethane/organoclay nanocomposite

In this study, polyurethane/organically modified layered silicate (organoclay) nanocomposites were prepared through in situ polymerization in the presence of organoclay. Phase morphology of the polyurethane/organoclay nanocomposite was investigated by small-angle X-ray scattering (SAXS) and atomic force microscopy (AFM). The results suggest that the inter-domain repeat distance decreased with the introduction of organoclay. The organoclay has a more significant effect on the inter-domain repeat distance at a low hard segment content. Also with the increase of the hard segment, the inter-domain repeat distance and domain size increased markedly. The size of hard domain of the polyurethane was found to be in the range of 12-32 nm in this case, and it keeps nearly unchanged with the clay content. It is suggested by AFM phase imaging technique that the hard domain can self-organize further to form spherical aggregates. The introduction of clay into the polyurethane matrix resulted in the decrease in the size of the spherical aggregates from ∼800 nm to ∼500 nm, indicating clay has an important effect on the aggregation behavior of hard domains. The effect of clay on the surface energy was examined by means of AFM and goniometry techniques. The results obtained by two methods are consistent, i.e., with the increase of clay content, the surface energy decreased due to the effect of organic modifier.     

SYNTHESIS AND PROPERTIES OF POLYURETHANE ACRYLATE/EPOXY RESIN INTERPENETRATING POLYMER NETWORKS

In this paper, a series of interpenetrating polymer networks (IPNs) based on polyurethane acrylate and epoxy resin was prepared by simultaneous photoinitiating by both free-radical and cationic polymerization. The effects of the polyurethane acrylate prepolymer's molecular weight, various components ratio and polymerization methods on IPN's dynamic mechanical and mechanical properties were investigated.     

气致驱动聚苯胺/聚氨酯双层薄膜的制备与表征

以电纺聚氨酯（PU）纤维膜为基底,用滴涂聚苯胺（PANI）的方法,制备了具有不对称结构的PANI/PU双层薄膜气致驱动器。研究发现,在氯化氢气体的诱导下,该PANI/PU双层膜表现出弯曲-恢复的形变行为,这与氯化氢对聚苯胺的吸/脱附及掺杂/脱掺杂有关。此外,对驱动器承重的研究表明,PANI/PU双层人工智能肌肉可承重其自身重量的9倍以上,显示出良好的承重能力。该气致驱动器制备方法简单,其气体响应的驱动行为易于操作,具有重要的技术应用前景。     

PUT/SiO2复合材料的制备与表征

利用溶胶-凝胶法将硅烷染料、含硅氧烷的非线性聚氨酯与正硅酸乙酯(TEOS)共水解, 缩合制备了新型聚氨酯噻唑(PUT/SiO2)纳米复合材料, 并用IR、SEM、TEM、UV-Vis、DSC和TGA对其结构和性能进行了表征. 结果显示, 材料中聚氨酯与SiO2以共价键相连, 没有发生相分离, 且其中非线性较好的噻唑生色团含量和材料的玻璃化转变温度(Tg)、热分解温度(Td)都较纯非线性光学材料(NLO)聚氨酯(PU)有显著增加, 可以用来制备性能优良的二阶非线性光学器件.