Electrochemical sensor based on chlorohemin modified molecularly imprinted microgel for determination of 2,4-dichlorophenol

A newly designed molecularly imprinted polymer (MIP) was synthesized and successfully utilized as a recognition element of an amperometric sensor for 2,4-dichlorophenol (2,4-DCP) detection. The MIP with a well-defined structure could imitate the dehalogenative function of the natural enzyme chloroperoxidase for 2,4-DCP. Imprinted sensor was fabricated in situ on a glassy carbon electrode surface by drop-coating the 2,4-DCP imprinted microgel suspension and chitosan/Nafion mixture. Under optimized conditions, the sensor showed a linear response in the range of 5.0–100 μmol L⁻¹ with a detection limit of 1.6 μmol L⁻¹. Additionally, the imprinted sensor demonstrated higher affinity to target 2,4-DCP over competitive chlorophenolic compounds than non-imprinted sensor. It also exhibited good stability and acceptable repeatability. The proposed sensor could be used for the determination of 2,4-DCP in water samples with the recoveries of 96.2–111.8%, showing a promising potential in practical application.     

A novel high selective and sensitive para-nitrophenol voltammetric sensor, based on a molecularly imprinted polymer-carbon paste electrode

By using a molecularly imprinted polymer (MIP) as a recognition element, the design and construction of a high selective voltammetric sensor for para-nitrophenol was formed. Para-nitrophenol selective MIP and a non-imprinted polymer (NIP) were synthesized, and then used for carbon paste (CP) electrode preparation. The MIP-CP electrode showed greater recognition ability in comparison to the NIP-CP. It was shown that electrode washing after para-nitrophenol extraction led to enhanced selectivity, without noticeably decreasing the sensitivity. Some parameters affecting sensor response were optimized and a calibration curve was plotted. A dynamic linear range of 8 × 10⁻⁹ to 5 × 10⁻⁶ mol L⁻¹ was obtained. The detection limit of the sensor was calculated as 3 × 10⁻⁹ mol L⁻¹. Thus, this sensor was used successfully for the para-nitrophenol determination in different water samples.     

A novel high selective and sensitive metronidazole voltammetric sensor based on a molecularly imprinted polymer-carbon paste electrode

The design and construction of a highly selective voltammetric sensor for metronidazole by using a molecularly imprinted polymer (MIP) as recognition element were introduced. A metronidazole selective MIP and a nonimprinted polymer (NIP) were synthesized and then incorporated in the carbon paste electrodes (CPEs). The sensor was applied for metronidazole determination using cathodic stripping voltammetric method. The MIP-CP electrode showed very high recognition ability in comparison to NIP-CPE. Some parameters affecting the sensor response were optimized and then the calibration curve was plotted. Two dynamic linear ranges of 5.64 × 10⁻⁵ to 2.63 × 10⁻³ mg L⁻¹ and 2.63 × 10⁻³ to 7.69 × 10⁻² mg L⁻¹ were obtained. The detection limit of the sensor was calculated as 3.59 × 10⁻⁵ mg L⁻¹. This sensor was used successfully for metronidazole determination in biological fluids.     

Computational design and multivariate optimization of an electrochemical metoprolol sensor based on molecular imprinting in combination with carbon nanotubes

This work describes the development of an electrochemical sensor based on a new molecularly imprinted polymer for detection of metoprolol (MTP) at ultra-trace level. The polypyrrole (PPy) was electrochemically synthesized on the tip of a pencil graphite electrode (PGE) which modified whit functionalized multi-walled carbon nanotubes (MWCNTs). The fabrication process of the sensor was characterized by cyclic voltammetry (CV) and the measurement process was carried out by differential pulse voltammetry (DPV). A computational approach was used to screening functional monomers and polymerization solvent for rational design of molecularly imprinted polymer (MIP). Based on computational results, pyrrole and water were selected as functional monomer and polymerization solvent, respectively. Several significant parameters controlling the performance of the MIP sensor were examined and optimized using multivariate optimization methods such as Plackett–Burman design (PBD) and central composite design (CCD). Under the selected optimal conditions, MIP sensor was showed a linear range from 0.06 to 490 μmol L⁻¹ MTP, a limit of detection of 2.88 nmol L⁻¹, a highly reproducible response (RSD 3.9%) and a good selectivity in the presence of structurally related molecules. Furthermore, the applicability of the method was successfully tested with determination of MTP in real samples (tablet, and serum).     

Development of a sensitive and selective kojic acid sensor based on molecularly imprinted polymer modified electrode in the lab-on-valve system

In this work, a kojic acid electrochemical sensor, based on a non-covalent molecularly imprinted polymer (MIP) modified electrode, had been fabricated in the lab-on-valve system. The sensitive layer was synthesized by cyclic voltammetry using o-phenylenediamine as the functional monomer and kojic acid as the template. The template molecules were then removed from the modified electrode surface by washing with NaOH solution. Differential pulse voltammetry method using ferricyanide as probe was applied as the analytical technique, after extraction of kojic acid on the electrode. Chemical and flow parameters associated with the extraction process were investigated. The response recorded with the imprinted sensor exhibited a response in a range of 0.01-0.2 μmol L⁻¹ with a detection limit of 3 nmol L⁻¹. The interference studies showed that the MIP modified electrode had excellent selectivity. Furthermore, the proposed MIP electrode exhibited good sensitivity and low sample/reagent consumption, and the sensor could be applied to the determination kojic acid in cosmetics samples.     

Using an Electrochemical MIP Sensor for Selective Determination of 1-Naphthol in Oilfield Produced Water

A molecularly imprinted polymer (MIP) sensor was successfully constructed on glassy carbon electrode for the determination of 1-naphthol (1-Nph). The sensor was constructed by electropolymerization on bare GCE in the presence of the target molecule. The recognition of 1-Nph was conducted indirectly using [Fe(CN)₆]^3−/4− as redox probe. The MIP sensor presented wide linear working range and limit of detection of 1.5×10⁻⁹ mol L⁻¹. The MIP sensor was applied for the determination of 1-Nph in oilfield produced water. The results obtained showed good selectivity and sensitivity of the proposed sensor in terms of 1-Nph quantification.     

A novel molecularly imprinted sensor for selectively probing imipramine created on ITO electrodes modified by Au nanoparticles

A sensitive molecularly imprinted electrochemical sensor was created for selective detection of a tricyclic antidepressant imipramine by combination of Au nanoparticles (Au-NPs) with a thin molecularly imprinted film. The sensor was fabricated onto the indium tin oxide (ITO) electrode via stepwise modification of Au-NPs by self-assembly and a thin film of molecularly imprinted polymers (MIPs) via sol-gel technology. It was observed that the molecularly imprinted film displayed excellent selectivity towards the target molecule imipramine. Meanwhile, the introduced Au-NPs exhibited noticeable catalytic activities towards imipramine oxidation, which remarkably enhanced the sensitivity of the imprinted film. Due to such combination, the as-prepared sensor responded quickly to imipramine, within only 1 min of incubation. The differential voltammetric anodic peak current was linear to the logarithm of imipramine concentration in the range from 5.0 × 10⁻⁶ to 1.0 × 10⁻³ mol L⁻¹, and the detection limits obtained was 1.0 × 10⁻⁹ mol L⁻¹. This method proposed was successfully applied to the determination of imipramine in drug tablets, and proven to be reliable compared with conventional UV method. These results reveal that such a sensor fulfills the selectivity, sensitivity, speed and simplicity requirements for imipramine detection, and provides possibilities of clinical application in physiological fluids.     

纳米氧化铜修饰的苯巴比妥分子印迹传感器的制备及其电化学性能

为了改善分子印迹传感器的灵敏度, 在四丁基高氯酸铵的支持电解质溶液中, 以甲基丙烯酸为功能单体, 马来松香丙烯酸乙二醇酯为交联剂在纳米氧化铜修饰过的玻碳电极上电聚合了一种苯巴比妥(PB)识别性能的分子印迹传感膜. 采用循环伏安(CV)法、差分脉冲伏安(DPV)法及交流阻抗(EIS)法对这种纳米氧化铜修饰过的印迹及非印迹电极的电化学性能进行了研究, 结果显示纳米氧化铜修饰过的印迹及非印迹电极的电化学性能完全不同. X射线衍射(XRD)证实纳米粒子为氧化铜. 采用扫描电镜(SEM)对纳米氧化铜修饰过的印迹传感器的形貌进行分析, 发现纳米氧化铜分散在电极表面, 改善了修饰印迹传感器的识别点. 差分脉冲伏安法(DPV)表明苯巴比妥的浓度在1.0×10^-8-1.8×10^-4 mol·L^-1 范围内呈现良好的线性关系(线性相关系数R=0.9994); 检出限2.3×10^-9 mol·L^-1 (信噪比(S/N)=3). 研究结果表明纳米氧化铜修饰过的印迹传感器具有较高灵敏度及选择性. 此印迹传感器能用于实际样品中苯巴比妥的检测, 加标回收率在95.0%-102.5%.     

A highly selective molecularly imprinted electrochemiluminescence sensor for ultra-trace beryllium detection

A new molecularly imprinted electrochemiluminescence (ECL) sensor was proposed for highly sensitive and selective determination of ultratrace Be²⁺ determination. The complex of Be²⁺ with 4-(2-pyridylazo)-resorcinol (PAR) was chosen as the template molecule for the molecularly imprinted polymer (MIP). In this assay, the complex molecule could be eluted from the MIP, and the cavities formed could then selectively recognize the complex molecules. The cavities formed could also work as the tunnel for the transfer of probe molecules to produce sound responsive signal. The determination was based on the intensity of the signal, which was proportional to the concentrations of the complex molecule in the sample solution, and the Be²⁺ concentration could then be determined indirectly. The results showed that in the range of 7 × 10⁻¹¹ mol L⁻¹ to 8.0 × 10⁻⁹ mol L⁻¹, the ECL intensity had a linear relationship with the Be²⁺ concentrations, with the limit of detection of 2.35 × 10⁻¹¹ mol L⁻¹. This method was successfully used to detect Be²⁺ in real water samples.     

Construction of a novel molecularly imprinted sensor for the determination of O,O-dimethyl-(2,4-dichlorophenoxyacetoxyl)(3′-nitrophenyl)methinephosphonate

A novel voltammetric sensor for O,O-dimethyl-(2,4-dichlorophenoxyacetoxyl)(3′-nitrophenyl)methinephosphonate (Phi-NO₂) based on molecularly imprinted polymer (MIP) film electrode is constructed by using sol-gel technology. The sensor responds linearly to Phi-NO₂ over the concentration range of 2.0 × 10⁻⁵ to 1.0 × 10⁻⁸ mol L⁻¹ and the detection limit is 1.0 × 10⁻⁹ mol L⁻¹ (S/N = 3). This sensor provides an efficient way for eliminating interferences from coexisting substances in the solution. The high sensitivity, selectivity and stability of the sensor demonstrates its practical application for a simple and rapid determination of Phi-NO₂ in cabbage samples.     

Electrochemical Determination of Tetracycline Using Molecularly Imprinted Polymer Modified Carbon Nanotube‐Gold Nanoparticles Electrode

This paper reports the use of a tetracycline (TC) sensor constructed from a combination of molecularly imprinted polymer (MIP) and gold nanoparticles modified multiwall carbon nanotubes (MWNTs‐GNPs). The results demonstrated that the amount of recognition sites in the polymer was significantly increased and the electron transfer ability of the sensor was improved. The relationship between the peak current and the TC concentration was linear in the range from 0.1 to 40 mg L^?1, and the detection limit was 0.04 mg L^?1 (S/N=3). The peak current to TC was 4.3, 6.2 and 6.8 times larger than that of oxytetracycline, chloramphenicol and nafcillin, respectively. Thus, the combination of MIP and MWNTs‐GNPs provides a sensitive and selective electrochemical detection method for tetracycline.     

A Novel Molecularly Imprinted Potentiometric Sensor for the Fast Determination of Bisoprolol Fumarate in Biological Samples

In this study, molecularly imprinted polymer (MIP) was prepared and used in the preparation of carbon paste electrode (CPE) for the quantification of bisoprolol fumarate (BF) in pure, pharmaceutical formulation and biological fluids. The selective MIP for BF was synthesized from methacrylic acid as the functional monomer, ethylene glycol dimethacrylate as the cross-linker in dimethyl sulfoxide solution, BF as the template molecule and 2, 2-azobisisobutyronitrile (AIBN) as the initiator. The non-imprinted polymer (NIP) was synthesized by the same procedure, but in the absence of the template molecule then incorporated in the paste of the carbon paste electrodes (CPEs). The prepared MIP for BF and its corresponding NIP were well characterized using scanning electron microscopy (SEM), Fourier transform infrared spectrometer, and thermal gravimetric analysis (TGA). The MIP and NIP based CPEs were further used for the determination of BF and the obtained results indicated that the sensor modified by the MIP have much higher recognition power for the BF molecules than the NIP based sensor where the MIP based CPE exhibited a Nernstian response 29.50±0.55 mV decade⁻¹ within a concentration range of 1.0×10⁻⁷–1.0×10⁻² mol L⁻¹and pH independence in the range 3.50–7.15. The proposed sensor has high selectivity over several possible interfering compounds. The obtained results by the proposed sensor were satisfactory with excellent percentage recovery and relative standard deviation and were comparable with those obtained from HPLC reported method.     

Selective and sensitive molecularly imprinted sol–gel film-based electrochemical sensor combining mercaptoacetic acid-modified PbS nanoparticles with Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@Au–multi-walled carbon nanotubes–chitosan

A sensitive molecularly imprinted electrochemical sensor was developed for selective detection of streptomycin by combination of mercaptoacetic acid-modified PbS nanoparticles with Au-coated Fe₃O₄ magnetic nanoparticles dispersed multi-walled carbon nanotubes doped chitosan film. The imprinted sensor was fabricated onto the Au electrode via stepwise modification of nanocomposites and an electrodeposited thin film of molecularly imprinted polymers via sol–gel technology. The morphologies and electrochemical behaviors of the imprinted sensor were characterized by scanning electron microscope, cyclic voltammetry, and differential pulse voltammetry, respectively. The prepared sensor showed very high recognition ability and selectivity for streptomycin. Under optimal conditions, the imprinted sensor displayed good electrocatalytic activity to the redox of streptomycin. And the differential voltammetric anodic peak current was linear to the logarithm of streptomycin concentration in the range from 1.0 × 10⁻⁶ to 1.0 × 10⁻³ mol L⁻¹, and the detection limit obtained was 1.5 × 10⁻⁹ mol L⁻¹. This proposed imprinted sensor was used successfully for streptomycin determination in different injection solution samples.     

利用辅助识别聚合物链制备牛血清白蛋白分子印迹聚合物

论文提出了一种新的蛋白质分子印迹方法, 即以聚乙烯醇接枝聚合物作为辅助识别聚合物链(ARPCs), 以丙烯酰胺为单体, 在丙烯酸酯树脂载体表面进行聚合, 制备牛血清白蛋白分子印迹树脂. 实验使用2.00 mol•L⁻¹氯化钾(KC1)溶液除去模板蛋白质, 使用十二烷基磺酸钠-聚丙烯酰胺凝胶电泳(SDS-PAGE)检测吸附蛋白质, 并设计使用0.150, 0.500和2.00 mol•L⁻¹KC1溶液分别对吸附蛋白质进行梯度洗提. 电泳实验结果表明, 2.00 mol•L⁻¹KC1溶液洗脱的蛋白质是大孔树脂的吸附效应; 0.500 mol•L⁻¹KC1溶液洗脱掉的是印迹蛋白质. 引入ARPCs制得的分子印迹树脂, 用于混合蛋白质体系吸附时, 对模板蛋白质的吸附量为80~100μg•g⁻¹, 其特异性吸附能力较未引入ARPCs之前有明显提高.     

Modification of Carbon Paste Electrode Based on Molecularly Imprinted Polymer for Electrochemical Determination of Diazinon in Biological and Environmental Samples

The wide use of pesticides can lead to environmental and human adverse effects. Diazinon, as an organophosphorous pesticide, is used in agriculture because of its low cost and high efficiency on insects. Due to the increasing application of pesticides, accurate analytical methods are necessary. The aim of this work was modification of carbon paste electrode composition and applying it as a sensor for determination of diazinon in biological and environmental samples. Multi‐walls carbon nanotubes and a molecularly imprinted polymer were used as modifiers in the sensor composition. A molecularly imprinted polymer and a non‐imprinted polymer were synthesized for applying in the electrode. After optimization of electrode composition, it was used to determine the analyte concentration. Instrumental parameters affecting the square wave voltammetric response were adjusted to obtain the highest current intensity. The modified electrode with MIP showed very high recognition ability compared to the electrode containing NIP. The obtained linear range was 5×10⁻¹⁰ to 1×10⁻⁶ mol L⁻¹. The detection limit of the sensor was 1.3×10⁻¹⁰ mol L⁻¹ and the relative standard deviation for analysis of target molecule by the proposed sensor was 2.87 %. This sensor was used to determine the diazinon in real samples (human urine, tap, and river water samples) without special sample preparation before analysis. The optimization of electrode composition containing mentioned modifiers improved its response considerably.     

A novel sensor based on multi-walled carbon nanotubes and boron-doped double-layer molecularly imprinted membrane for the analysis of SCZ in pharmaceutical and biological samples

ABSTRACT

A molecularly imprinted electrochemical sensor for the rapid detection of the anti-parasitic drug Secnidazole (SCZ) is reported. In this work, the build electrochemical sensor was based on a carbon paste electrode (CPE) modified with multi-wall carbon nanotubes (MWCNTs) and boron-embedded duplex molecularly imprinted composite membranes (B-DMICMs), that significantly increased the efficiency of the sensor for the detection of template molecule SCZ. Density functional theory (DFT) was employed to study the interactions between the template and monomers to select appropriate functional monomers for rational design of the B-DMICMs.The optimal experimental conditions were optimised for the factors affecting the performance of the sensor. Under the optimal conditions, the reduction peak currents of SCZ by differential pulse voltammetry increased linearly with SCZ concentration in the range from 3.0 × 10^?4 to 1.0 × 1.0^?6 mol L^?1 and 1.0 × 1.0^?6 to 1.91 × 10^?8 mol L^?1 with a detection limit of 1.72 × 10^?8 mol L^?1 for secnidazole, which is significantly lower than those in the currently used methods and in previous reports. This method offers low cost, sensitive and effective determination of SCZ and can potentially be used for detection of SCZ in pharmaceutical and biological samples with good precision and accuracy.     

New sensing material of molecularly imprinted polymer for the selective recognition of sulfamethoxazole in foods and plasma and employing the Taguchi optimization methodology to optimize the carbon paste electrode

A new man-tailored biomimetic sensor for sulfamethoxazole host–guest interactions and potentiometric transduction is presented. The host cavity was shaped on a polymeric surface assembled with methacrylic acid monomers by radical polymerization. Molecularly imprinted particles (MIP) were mixed with graphite powder, paraffin oil and ionic site. Using the Taguchi method, this study analyzed the optimum conditions for preparing the carbon paste electrode. The controllable factors used in this study consisted the weights of (1) MIP, (2) paraffin oil, (3) graphite, and (4) the ionic site. The percentage contribution of each controllable factor was also determined. MIP-modified electrode exhibited a Nernstian response (57.2 mVdecade^?1) in a wide concentration range of 6.0 × 10^?8 to 3.1 × 10^?3 mol L^?1 with a lower detection limit of 3.5 × 10^?9 mol L^?1. The sensor was successfully applied to the determination of sulfamethoxazole concentrations in foods and plasma.     

Electrochemical sensor for determination of aflatoxin B1 based on multiwalled carbon nanotubes-supported Au/Pt bimetallic nanoparticles

A sensitive and selective imprinted electrochemical sensor for the determination of aflatoxin B₁ (AFB₁) was constructed on a glassy carbon electrode by stepwise modification of functional multiwalled carbon nanotubes (MCNTs), Au/Pt bimetallic nanoparticles (Au/PtNPs), and a thin imprinted film. The fabrication of a homogeneous porous poly o-phenylenediamine (POPD)-grafted Au/Pt bimetallic multiwalled carbon nanotubes nanocomposite film was conducted by controllable electrodepositing technology. The sensitivity of the sensor was improved greatly because of the nanocomposite functional layer; the proposed sensor exhibited excellent selectivity toward AFB₁ owing to the porous molecular imprinted polymer (MIP) film. The surface morphologies of the modified electrodes were characterized using a scanning electron microscope. The performance of the imprinted sensor was investigated by cyclic voltammetry, differential pulse voltammetry, and electrochemical impedance spectroscopy in detail. A linear relationship between the sensor response signal and the logarithm of AFB₁ concentrations ranging from 1?×?10^?10 to 1?×?10^?5 mol L^?1 was obtained with a detection limit of 0.03 nmol L^?1. It was applied to detect AFB₁ in hogwash oil successfully.     

Development and characterization of an amperometric sensor for triclosan detection based on electropolymerized molecularly imprinted polymer

A novel amperometric sensor based on electropolymerized molecularly imprinted polymer (MIP) for triclosan detection is reported. The sensor was prepared by electropolymerizing o-phenylenediamine (o-PD) on a glassy carbon electrode in the presence of template triclosan. The template can be quickly removed by NaOH solution. After incubating in acetate buffer for 15 min, the sensor response sensitively to triclosan over a linear range of 2.0 × 10^{− 7} to 3.0 × 10^{− 6} mol/L and a detection limit as low as 8.0 × 10^{− 8} mol/L is obtained. This sensor provides an efficient way for eliminating interferences from compounds with similar structures to that of triclosan.     

An optical sensor for the determination of digoxin in serum samples based on a molecularly imprinted polymer membrane

This paper reports the synthesis and testing of a molecularly imprinted polymer membrane for digoxin analysis. Digoxin-specific bulk polymer was obtained by the UV initiated co-polymerisation of methacrylic acid and ethylene glycol dimethacrylate in acetonitrile as porogen. After extracting the template analyte, the ground polymer particles were mixed with plasticizer polyvinyl chloride to form a MIP membrane. A reference polymer membrane was prepared from the same mixture of monomers but with no template. The resultant membrane morphologies were examined by scanning electron microscopy. The imprinted membrane was tested as the recognition element in a digoxin-sensitive fluorescence sensor; sensor response was measured using standard solutions of digoxin at concentrations of up to 4 × 10⁻³ mg L⁻¹. The detection limit was 3.17 × 10⁻⁵ mg L⁻¹. Within- and between-day relative standard deviations RSD (n = 5) were in the range 4.5-5.5% and 5.5-6.5% respectively for 0 and 1 × 10⁻³ mg L⁻¹ digoxin concentrations. A selectivity study showed that compounds of similar structure to digoxin did not significantly interfere with detection for interferent concentrations at 10, 30 and 100 times higher than the digoxin concentration. This simply manufactured MIP membrane showed good recognition characteristics, a high affinity for digoxin, and provided satisfactory results in analyses of this analyte in human serum.