Chiral ligand exchange capillary electrophoresis using borate anion as a central ion

Native DL-pantothenic acid, having a 1,3-diol structure, was chirally resolved by ligand exchange capillary electrophoresis using (S)-3-amino-1,2-propanediol as a chiral selector and the borate anion as a central ion. The optimum conditions for both high resolution and short migration time of DL-pantothenic acid were found to be 200 mM (S)-3-amino-1,2-propanediol and 200 mM borate buffer (pH 9.2) containing 15% methanol with an applied voltage of +25 kV at 20 degrees C, using direct detection at 200 nm. With this system, the resolution (Rs) of racemic pantothenic acid was approximately 1.7. When (S)-1,2-propanediol, (S)-1,2,3-propanetriol, (S)-1,3-butanediol or (S)-1-amino-2-propanol were used as chiral ligand instead of (S)-3-amino-1,2-propanediol, DL-pantothenic acid was not enantioseparated. When borate was replaced with Tris or butylborate, no chiral separation was achieved. Therefore, the ionic interaction between the amino and carboxyl groups of the ternary complex may play an important role in the enantioseparation of DL-pantothenic acid by the proposed CE system.     

Direct chiral resolution of tartaric acid by ion-pair capillary electrophoresis using an aqueous background electrolyte with (1R,2R)-(-)-1,2-diaminocyclohexane as a chiral counterion

Chiral resolution of native DL-tartaric acid was achieved by ion-pair capillary electrophoresis (CE) using an aqueous-ethanol background electrolyte with (1R,2R)-(-)-1,2-diaminocyclohexane (R-DACH) as a chiral counterion. Factors affecting chiral resolution and migration time of tartaric acid were studied. By increasing the viscosity of the background electrolyte and the ion-pair formation, using organic solvents with a lower relative dielectric constant, resulted in a longer migration time. The optimum conditions for both high resolution and short migration time of tartaric acid were found to be a mixture of 65% v/v ethanol and 35% v/v aqueous solution containing 30 mM R-DACH and 75 mM phosphoric acid (pH 5.1) with an applied voltage of -30 kV at 25 degrees C, using direct detection at 200 nm. By using this system, the resolution (Rs) of racemic tartaric acid was approximately 1. The electrophoretic patterns of tartaric and malic acids suggest that two carboxyl groups and two hydroxyl groups of tartaric acid are associated with the enantioseparation of tartaric acid by the proposed CE method.     

Direct enantioseparation of lipoic acid in dietary supplements by capillary electrophoresis using trimethyl-β-cyclodextrin as a chiral selector

Lipoic acid, an antioxidant, naturally occurs as the (R)-enantiomer, while synthetic lipoic acid is racemic. It is thus of interest to know the (R)-enantiomer content of lipoic acid supplements. Here, we used capillary electrophoresis to directly enantioseparate lipoic acid in dietary supplements by using a sulfonated capillary with an effective voltage of +18 kV and direct detection at 200 nm. Factors affecting migration time and resolution of lipoic acid were investigated. The optimum background electrolyte was found to be 100 mM phosphate buffer (pH 7.0) containing 8 mM trimethyl-β-cyclodextrin as a chiral selector at 20°C. Under the proposed conditions, direct chiral resolution of lipoic acid in dietary supplements was conducted successfully.     

Direct chiral resolution of tartaric acid in food products by ligand exchange capillary electrophoresis using copper(II)-D-quinic acid as a chiral selector.

Chiral resolution of native DL-tartaric acid was performed by ligand-exchange capillary electrophoresis using copper(II)-D-quinic acid as a chiral selector. Factors affecting chiral resolution, migration time, and peak area of tartaric acid were studied. The running conditions for optimum separation of tartaric acid were found to be 1 mM copper(II) sulfate-10 mM D-quinic acid (pH 5.0) with an effective voltage of -15 kV at 30 degrees C, using direct detection at 250 nm, and resolution of racemic tartaric acid was approximately 1.3. With this system, chiral resolution of DL-tartaric acid in food products was conducted successfully.     

Direct chiral resolution of malic acid in apple juice by ligand-exchange capillary electrophoresis using copper(II)-L-tartaric acid as a chiral selector

Chiral resolution of native DL-malic acid was achieved by ligand-exchange capillary electrophoresis using copper(II)-L-tartrate as a chiral selector. Factors affecting chiral resolution, migration time, and peak area of malic acid were studied. The running conditions for optimum separation of malic acid were found to be 1 mM copper(II) sulfate-1 mM L-tartrate (pH 5.1) with an effective voltage of -20 kV at 30 degrees C, using direct detection at 280 nm, and resolution (Rs) of racemic malic acid was approximately 4. With this system, D- and L-malic acids in apple juice were analyzed successfully.     

Sensitized phosphorescence as detection method for the enantioseparation of bupropion by capillary electrophoresis

A new CE detection method was developed for the chiral drug bupropion (a second-generation antidepressant), based on phosphorescence both in the direct and in the sensitized mode using pulsed laser excitation at 266 nm. Electrokinetic chromatography using 5 mM sulfated-α-CD as chiral selector in 25 mM phosphate buffer at pH 3 allowed the separation of bupropion enantiomers with a high chiral resolution (Rs>3). In the sensitized phosphorescence detection mode, excitation energy is transferred from the analyte to an acceptor (1-bromo-4-napthhalenesulfonic acid or biacetyl) followed by time-resolved phosphorescence detection under deoxygenated buffer conditions. Using 2 × 10(-4) M biacetyl as the acceptor an LOD of 2 × 10(-7) M was obtained for each enantiomer, about 40 times better than in the direct mode. Under these separation conditions, no significantly different phosphorescence lifetimes (measured on-line) were obtained for the two bupropion enantiomers. The suitability of the method was demonstrated with the quantification of bupropion in a pharmaceutical formulation and its determination in a spiked urine sample.     

Simultaneous chiral resolution of monosaccharides as 8-aminonaphthalene-1,3,6-trisulfonate derivatives by ligand-exchange CE using borate as a central ion of the chiral selector

Six reducing monosaccharides (mannose, galactose, fucose, glucose, xylose, and arabinose) were derivatized with 8-aminonaphthalene-1,3,6-trisulfonate (ANTS). Based on the chiral ligand-exchange principle using borate as a central ion of the chiral selector and (S)-3-amino-1,2-propanediol (SAP) as a chiral selector ligand, all of the six ANTS-monosaccharides were simultaneously enantioseparated using absorbance at 245 nm for detection. The optimum conditions for both high resolution and moderately short migration time consisted of 200 mM SAP-200 mM borate buffer (pH 9.2) containing 10% ACN as a BGE at 30 degrees C with an applied voltage of +30 kV. It was revealed that the proposed chiral ligand-exchange CE using the SAP-borate system was applicable to enantioseparation of not only diols but also polyols.     

Chiral CE of aromatic amino acids by ligand-exchange with zinc(II)-L-lysine complex

A novel method of chiral ligand-exchange CE was developed with either L- or D-lysine (Lys) as a chiral ligand and zinc(II) as a central ion. This type of chiral complexes was explored for the first time to efficiently separate either individual pairs of or mixed aromatic amino acid enantiomers. Using a running buffer of 5 mM ammonium acetate, 100 mM boric acid, 3 mM ZnSO(4) x 7H(2)O and 6 mM L-Lys at pH 7.6, unlabeled D,L-tryptophan, D,L-phenylalanine, and D,L-tyrosine were well separated, giving a chiral resolution of up to 7.09. The best separation was obtained at a Lys-to-zinc ratio of 2:1, zinc concentration of 2-4 mM and running buffer pH 7.6. The buffer pH was determined to have a strong influence on resolution, while buffer composition and concentration impacted on both the resolution and peak shape. Boric acid with some ammonium acetate was an adoptable buffer system, and some additives like ethylene diamine tetraacetic acid capable of destroying the complex should be avoided. Fine-tuning of the chiral resolution and elution order was achieved by regulating the ratio of L-Lys to D-Lys; i.e. the resolution increased from zero to its highest value as the ratio ascended from 1:0 to 1:infinitive, and L-isomers eluted before or after D-isomers in excessive D- or L-Lys, respectively.     

Chiral separation of polychlorinated biphenyls using a combination of hydroxypropyl-gamma-cyclodextrin and a polymeric chiral surfactant

Chiral separation of moderately to highly hydrophobic polychlorinated biphenyls (PCBs) using a conventional chiral micelle or a polymeric chiral surfactant, as the single chiral selector is very difficult since the hydrophobic interactions between the chiral PCB and the monomeric or polymeric surfactant is very strong. Combined use of a polymeric chiral surfactant, polysodium N-undecanoyl-D-valinate (poly-D-SUV) with hydroxypropyl-gamma-cyclodextrin (HP-gamma-CD) was successful in cyclodextrin modified electrokinetic chromatography (CD-EKC) enantioseparation of PCB congeners. Addition of HP-gamma-CD to the background electrolyte containing poly-D-SUV functioned to improved chiral resolution for the PCBs and reduce the analysis time for these congeners. In addition, concentration of methanol, concentration of 2-(N-cyclohexylamino) ethanesulfonic acid (CHES) buffer and separation voltage was also varied to optimize multicomponent separation of five chiral PCBs. Simultaneous separation and enantioseparation of all five PCBs was possible in less than 50 min under optimized conditions that requires a 5 mM CHES solution buffered at about pH 10 with 1.5% w/v (ca. 60 mM) poly-D-SUV and 16 mM HP-gamma-CD. In addition, 1 M urea and 20% v/v methanol should be added as organic modifier and the capillary temperature maintained at 45 degrees C. As expected the polymeric surfactant showed improved chiral resolution of PCBs over conventional micelles of SUV. Under optimized conditions, when CD-EKC of chiral PCBs using poly-D-SUV was compared to sodium dodecyl sulfate (SDS), better resolution, higher efficiency and shorter analysis time was achieved with poly-D-SUV.     

Enantiomeric separation of chiral phenoxy acid herbicides by electrokinetic chromatography. Application to the determination of analyte-selector apparent binding constants for enantiomers

The enantiomeric resolution of chiral phenoxy acid herbicides was performed by electrokinetic chromatography using a cyclodextrin as chiral pseudophase (CD-EKC). A systematic evaluation of several neutral and charged cyclodextrins was made. Among the cyclodextrins tested, (2-hydroxy)propyl beta-cyclodextrin (HP-beta-CD) was found to be the most appropriate for the enantioseparation of phenoxy acids. The influence of some experimental conditions, such as nature and pH of the background electrolyte, chiral selector concentration, and temperature, on the enantiomeric separation of phenoxy acids was also studied. The use of a 50 mM electrolyte solution in ammonium formate at pH 5 and a temperature of 40 degrees C enabled the enantiomeric resolution of four of the six phenoxy acids investigated (2-phenoxypropionic acid, 2(3-chlorophenoxy)propionic acid, 2-(4-chlorophenoxy)propionic acid, and 2-(2,4-dichlorophenoxy)propionic acid) obtaining migration times ranging from 9 to 15 min. Mixtures of the two phenoxy acids not enantiomerically resolved (2-(4-chlorophenoxy)-2-methylpropionic acid and 2-(2,4,5-trichlorophenoxy)propionic acid) and up to three of the phenoxy acids enantiomerically resolved were separated in about 15 min. Finally, the apparent binding constants for each enantiomer-HP-beta-CD pair were calculated at two temperature values (20 and 40 degrees C).     

Enantiomeric separation of dihydroxyphenylalanine (DOPA), methyldihydroxyphenylalanine (MDOPA) and hydrazinomethyldihydroxyphenylalanine (CDOPA) by using capillary electrophoresis with sulfobutyl ether-beta-cyclodextrin as a chiral selector

Capillary electrophoresis (CE) was successfully applied to the enantiomer resolution of racemic structurally related compounds, namely dihydroxyphenylalanine (DOPA), methyldihydroxyphenylalanine (MDOPA) and hydrazinomethyldihydroxyphenylalanine (CDOPA). The chiral resolution was performed in an untreated fused-silica capillary by using a phosphate buffer at pH 2.5 or 3.0 supplemented with sulfobutylated beta-cyclodextrin (SBE-CD). Resolution was strongly influenced by the concentration of the chiral selector added to the background electrolyte. In fact, 2-5 mM of SBE-CD enabled the resolution of DOPA and MDOPA enantiomers, while CDOPA optical isomers were resolved by using either 0.5 mM or 6-20 mM of SBE-CD. The latter separation conditions (reversed polarity mode) made it possible to obtain inversion of migration order.     

Chiral separation of amino acids derivatized with fluoresceine-5isothiocyanate by capillary electrophoresis and laser-induced fluorescence detection using mixed selectors of beta-cyclodextrin and sodium taurocholate

Chiral separation of 20 pairs of amino acids derivatized with fluoresceine-5-isothiocyanate (FITC) by capillary electrophoresis and laser-induced fluorescence detection was studied using the mixture of beta-cyclodextrin (beta-CD) and sodium taurocholate (STC) as selector. Resolution was considerably superior to that obtained by using either beta-CD or STC alone. The molar ratio of beta-CD to STC of about 2:3 was found to be critical to achieve maximum separation. At this beta-CD-to-STC ratio, chiral separation occurred at really low total concentration of beta-CD and STC (<0.1 mM). Other impacting factors were investigated including the total concentration of beta-CD and STC, pH, and capillary conditioning procedure between two successive runs. Using a running buffer of 80 mM borate containing 20 mM beta-CD and 30 mM STC at pH 9.3, all of the 20 pairs of FITC-amino acid enantiomers were baseline resolved. The resolutions of the most pairs of the amino acid enantiomers (17 of 20) were higher than 3.0, only three pairs gave a resolution lower than 3.0 but higher than 1.90 (beta-phenylserine, pSer). The highest resolution reached 14.58 (Glu). Two derivatives of beta-CD, 2-hydroxypropyl-beta-CD (HP-beta-CD) and heptakis(2,6-di-O-methyl)-beta-CD (DM-beta-CD) were also explored. HP-beta-CD showed similar cooperative effect with STC, while DM-beta-CD together with STC led to poorer chiral separation.     

Chiral analysis of UV nonabsorbing compounds by capillary electrophoresis using macrocyclic antibiotics: 1. Separation of aspartic and glutamic acid enantiomers

Glycopeptide antibiotics, namely vancomycin or teicoplanin, were evaluated in capillary electrophoresis for the analysis of UV nonabsorbing compounds such as aspartic and glutamic acid enantiomers. Electrophoretic runs were performed in laboratory-made polyacrylamide-coated capillaries using the partial filling-counter current method in order to avoid the presence on the detector path of the absorbing chiral selector. The background electrolyte consisted of an aqueous or aqueous-organic buffer in the pH range of 4.5-6.5 of sorbic acid/histidine and the appropriate concentration of chiral selector. Several experimental parameters such as antibiotic concentration and type, buffer pH, organic modifier, type and concentration of absorbing co-ion (for the indirect UV detection) were studied in order to find the optimum conditions for the chiral resolution of the two underivatized amino acids in their enantiomers. Among the two investigated chiral selectors, vancomycin resulted to be the most useful chiral selector allowing relatively high chiral resolution of the studied compounds even at low concentration. The optimized method (10 mM sorbic acid/histidine, pH 5, and 10 mM of vancomycin) was used for the analysis of real samples such as teeth dentine and beer.     

Methodology for predicting the separation of proteins by hydrophobic interaction chromatography and its application to a cell extract

Ligand-exchange micellar electrokinetic capillary chromatography was used for the chiral resolution of underivatized and dansyl amino acid enantiomers simultaneously. The separation was achieved by chiral copper(II)-L-valine complexes incorporated in micelles of sodium dodecyl sulfate (SDS). The enantioresolution was strongly affected by SDS and a concentration of 20 mM SDS was shown to be necessary for the separation. Other impacting factors were investigated including pH, the molar ratio of copper(II) to L-valine and the total concentration of complex. Using the proposed method, 11 different dansyl amino acids and two underivatized amino acids were separated successfully with a running electrolyte of 20 mM NH4OAc, 4 mM CuSO4, 8 mM L-valine and 20 mM SDS at pH 9.0 in less than 25 min. Experiments were also performed with other amino acid ligands in order to vary the stability and the sterical arrangement of the copper(II) complexes and the possible chiral recognition mechanism was also discussed briefly.     

Determination of alpha hydroxy acids in fruits by capillary electrophoresis.

Alpha hydroxy acids, malic acid, citric acid, tartaric acid, glycolic acid and lactic acid, were analyzed simultaneously using capillary electrophoresis with direct UV detection at 200 nm. The separation was carried out with uncoated fused-silica (50 cm x 50 microns i.d.), pressure injection at 15 psi s and operated at -15 kV potential. The separation buffers were prepared with 180 mM Na2HPO4, 1 mM cetyltrimethylammonium bromide and 15% (v/v) methanol and adjusted to pH 7.2 by phosphoric acid. Validation was performed for citric acid and malic acid. The obtained parameters were adequate and the limits of detection were 2.5 and 5 micrograms ml-1 for citric acid and malic acid, respectively. AHAs from natural fruit juices (orange and grape) were determined and measured with this method.     

Enantioseparation of 3,4-dihydroxyphenylalanine and 2-hydrazino-2-methyl-3-(3,4-dihydroxyphenyl)propanoic acid by capillary electrophoresis using cyclodextrins

The enantiomeric separations of 3,4-dihydroxyphenylalanine (dopa) and 2-hydrazino-2-methyl-3-(3,4-dihydroxyphenyl)propanoic acid (carbidopa) by capillary electrophoresis were studied using several native, neutral and anionic cyclodextrins as chiral additives and uncoated fused-silica capillaries. The effect of the type and concentration of the cyclodextrin added to 20 mM phosphate buffer (pH 2.5) on enantioseparation and migration times was studied. A high resolution value of 15.63 was obtained for dopa enantiomers with a buffer containing 20 mM single isomer, heptakis(2,3-diacetyl-6-sulfato)-beta-cyclodextrin. The enantiomers of carbidopa were separated using 20 mM carboxymethyl-beta-cyclodextrin as a chiral resolving agent. Both methods allowed the determination of 0.1% of the D-enantiomer (second migrating) in the presence of the L-enantiomer (first migrating) of dopa and carbidopa with a good precision. These methods also gave good results in terms of precision for both peak area, migration time, linearity and accuracy.     

Chiral separation of metalaxyl and benalaxyl fungicides by electrokinetic chromatography and determination of enantiomeric impurities

The enantiomers of two acylamine fungicides (metalaxyl and benalaxyl) were separated by EKC using CDs as chiral selectors. The use of 15 mM succinyl-γ-CD for metalaxyl and 5 mM succinyl-β-CD for benalaxyl dissolved in a 50 mM 2-morpholinoethanesulfonic acid buffer (pH 6.5), enabled the chiral separation of metalaxyl enantiomers in 11.5 min with a resolution of 3.1 and the enantiomeric separation of benalaxyl in 7.5 min with a resolution close to 15. Under these conditions, the two enantiomers of each of the chiral compound studied were also separated from folpet, very commonly present in fungicide formulations containing metalaxyl or benalaxyl. The analytical characteristics of the two developed methods were studied in terms of precision, linearity, selectivity, limits of detection (LODs) and limits of quantitation (LOQs) showing their suitability for the determination of these compounds in commercial agrochemical formulations. Finally, the development of an in-capillary preconcentration strategy allowed the detection of enantiomeric impurities up to 1.2% in commercial products labeled as enantiomerically pure in metalaxyl-M.     

Enantiomeric separations of primary amino compounds by capillary electrochromatography with monolithic chiral stationary phases of chiral crown ether-bonded negatively charged polyacrylamide gels

A novel enantiomeric separation method by capillary electrochromatography with chiral crown ether-bonded negatively charged polyacrylamide gels is presented. Two kinds of chiral crown ether derivatives, (+)-tetraallyl 18-crown-6 carboxylate and (+)-18-crown-6 tetracarboxylic acid 2-allyl ester were synthesized and allowed to covalently bind to a negatively charged polyacrylamide gel, a so-called monolithic stationary phase, respectively. The gel was placed in fused-silica tubing, the walls of which had been activated with a bifunctional reagent to make the resulting gel bind covalently to the inner surface. Enantiomeric separations of 12 primary amino compounds were achieved using these columns and mobile phases of 200 mM triethanolamine-300 mM boric acid buffers with high efficiencies of up to 135000 plates m(-1). Both the within- and between-run reproducibilities of retention time and separation factor were good. The reproducibilities of retention time and separation factor for three different columns prepared from a different batch of monomers were acceptable. The gel-filled capillaries were stable for at least 13 months with intermittent use for 3 months followed by storage at room temperature for 10 months. The result of the optical purity test of alanine-2-naphthylamide is also described.     

Synthesis and application of clindamycin succinate as a novel chiral selector for capillary electrophoresis

A novel chiral selector, clindamycin succinate, was synthesized and first used as a chiral selector in capillary electrophoresis (CE). The chiral resolution ability of this kind of clindamycin derivation was studied by CE using some racemic drugs as model analytes. From the experimental results, it was found that both resolution and selectivity of the selector were dependent on the following parameters: concentration of chiral selectors, pH of the running buffer, temperature of the capillary column, applied voltage and organic modifier used. The results show that the chiral selector possesses high resolution toward some racemic drugs, including ofloxacin, chlorphenamine, tryptophan, propranolol, sotalol and metoprolol. Excellent chiral resolution of these tested drugs was achieved under the optimal conditions of 50 mM clindamycin succinate, 10% MeOH v/v, 50 mM Tris buffer, pH 4.0, at 22 kV and 20 °C within 25 min.     

Enantioseparation of ofloxacin in urine by capillary electrokinetic chromatography using charged cyclodextrins as chiral selectors and assessment of enantioconversion

A method was developed for the enantioseparation of ofloxacin, a member of the fluoroquinolones, using an anionic cyclodextrin-derivative with or without combination with a neutral cyclodextrin-derivative, as the chiral selector (s) in an electrokinetic chromatography system. The best results were obtained with 0.35 mM sulfated beta-cyclodextrin dissolved in a 50 mM phosphate buffer, pH 2.5, and at 15 degrees C. Under these conditions, a resolution of 2 was readily achieved. Furthermore, under adequate separation conditions, studies were performed in order to assess possible in vitro and in vivo enantioconversion of levofloxacin. The current method allows detection of 2 microg R-(+)-ofloxacine/mL diluted urine without the necessity of sample cleanup.