Well-defined ruthenium(II) carboxylate as catalyst for direct C-H/C-O bond arylations with phenols in water

The ruthenium(II) carboxylate complex [Ru(O(2)CMes)(2)(p-cymene)] enabled efficient direct arylations of unactivated C-H bonds with easily available, inexpensive phenols. Extraordinary chemoselectivity of the well-defined ruthenium catalyst set the stage for challenging C-H/C-O bond functionalizations to occur under solvent-free conditions as well as in water, and allowed first direct C-H bond arylations with user-friendly diaryl sulfates as electrophiles.     

Synthesis, characterization, and electrochemistry of biorelevant photosensitive low-potential orthometalated ruthenium complexes

Redox potentials of photosensitive cyclometalated RuII derivatives of 2-phenylpyridine or 2-(4-tolyl)pyridine are controllably decreased by up to 0.8 V within several minutes. This is achieved by irradiation of the ruthena(II)cycles cis-[Ru(o-X-2-py)(LL)(MeCN)2]PF6 (2, X = C6H4 (a) or 4-MeC6H3 (b), LL = 1,10-phenanthroline or 2,2'-bipyridine). The cis geometry of the MeCN ligands has been confirmed by the X-ray structural studies. The sigma-bound sp2 carbon of the metalated ring is trans to LL nitrogen. Complexes 2 are made from [Ru(o-X-2-py)(MeCN)4]PF6 (1) and LL. This "trivial" ligand substitution is unusual because 1a reacts readily with phen in MeCN as solvent to give cis-[Ru(o-C6H4-2-py)(phen)(MeCN)2]PF6 (2c) in a 83% yield, but bpy does not afford the bpy-containing 2 under the same conditions. cis-[Ru(o-C6H4-2-py)(bpy)(MeCN)2]PF6 (2e) has been prepared in CH2Cl2 (74%). Studies of complexes 2c,e by cyclic voltammetry in MeOH in the dark reveal RuII/III quasy-reversible redox features at 573 and 578 mV (vs Ag/AgCl), respectively. A minute irradiation 2c and 2e converts them into new species with redox potentials of -230 and 270 mV, respectively. An exceptional potential drop for 2c is accounted for in terms of a photosubstitution of both MeCN ligands by methanol. ESR, 1H NMR, and UV-vis data indicate that the primary product of photolysis of 2c is an octahedral monomeric low-spin (S = 1/2) RuIII species, presumably cis-[RuIII(o-C6H4-2-py)(phen)(MeOH)2]2+. The primary photoproduct of bpy complex 2e is cis-[RuII(o-C6H4-2-py)(bpy)(MeCN)(MeOH)]+, and this accounts for a lower decrease in the redox potential. Irradiation of 2c in the presence of added chloride affords [(phen)(o-C6H4-2-py)ClRuIIIORuIVCl(o-C6H4-2-py)(phen)]PF6, a first mu-oxo-bridged mixed valent dimer with a cyclometalated unit. The structure of the dimer has been established by X-ray crystallography.     

Assessment of the intermediacy of arylpalladium carboxylate complexes in the direct arylation of benzene: evidence for C-H bond cleavage by "ligandless" species

Palladium-catalyzed direct arylations of benzene have been proposed to occur by the generation of a phosphine-ligated arylpalladium pivalate complex LPd(Ar)(OPiv) and reaction of this complex with benzene. We have isolated an example of the proposed intermediate and evaluated whether this complex does react with benzene to form the biaryl products of direct arylation. In contrast to the proposed mechanism, no biaryl product was formed from cleavage of the benzene C-H bond by LPd(Ar)(OPiv). However, reactions of LPd(Ar)(OPiv) with benzene and additives that displace or consume the phosphine ligand formed the arylated products in good yield, suggesting that a "ligandless" arylpalladium(II) carboxylate complex undergoes the C-H cleavage step. Consistent with this conclusion, we found that reactions catalyzed by Pd(OAc)(2) without a ligand occur faster than, and with comparable selectivities to, reactions catalyzed by Pd(OAc)(2) and a phosphine ligand.     

Highly selective intramolecular carbene insertion into primary C-H bond of α-diazoacetamides mediated by a (p-cymene)ruthenium(II) carboxylate complex

Complex [(p-cymene)Ru(η(1)-O(2)CCF(3))(2)(OH(2))] mediated transformation of α-diazoacetamides ArCH(2)N(C(CH(3))(3))C(O)CHN(2) to result in carbene insertion into the primary C-H bond exclusively, with the γ-lactam products being isolated in up to 98% yield. This unexpected reaction is striking in view of the presence of usually more reactive sites such as secondary C-H bonds in the substrates. DFT calculations based on proposed Ru-carbene species provide insight into this unique selectivity.     

Room-temperature regioselective C-H/olefin coupling of aromatic ketones using an activated ruthenium catalyst with a carbonyl ligand and structural elucidation of key intermediates

Mechanistic studies of the ruthenium-catalyzed reaction of aromatic ketones with olefins are presented. Treatment of the original catalyst, RuH(2)(CO)(PPh(3))(3), with trimethylvinylsilane at 90 °C for 1-1.5 h afforded an activated ruthenium catalyst, Ru(o-C(6)H(4)PPh(2))(H)(CO)(PPh(3))(2), as a mixture of four geometric isomers. The activated complex showed high catalytic activity for C-H/olefin coupling, and the reaction of 2'-methylacetophenone with trimethylvinylsilane at room temperature for 48 h gave the corresponding ortho-alkylation product in 99% isolated yield. The activated catalyst was thermally robust and showed excellent catalytic activity under refluxing toluene conditions. (1)H and (31)P NMR studies of the C-H/olefin coupling at room temperature suggested that an ortho-ruthenated complex, P,P'-cis-C,H-cis-Ru(2'-(6'-MeC(6)H(4)C(O)Me))(H)(CO)(PPh(3))(2), participated in the reaction as a key intermediate. Isotope labeling studies using acetophenone-d(5) indicated that the rate-limiting step was the C-C bond formation, not the C-H bond cleavage, and that each step prior to the reductive elimination was reversible. The rate of C-H/olefin coupling was found to exhibit pseudo first-order kinetics and to show first-order dependence on the ruthenium complex concentration.     

Transition metal complexes with wide-angle dithio-, diseleno- and ditelluroethers: properties and structural systematics

The ligands o-C(6)H(4)(CH(2)EMe)(2) (E = S or Se) have been prepared and characterised spectroscopically. A systematic study of the coordination chemistry of these, together with the telluroether analogue, o-C(6)H(4)(CH(2)TeMe)(2), with late transition metal centers has been undertaken. The planar complexes [MCl(2){o-C(6)H(4)(CH(2)SMe)(2)}] and [M{o-C(6)H(4)(CH(2)EMe)(2)}(2)](PF(6))(2) (M = Pd or Pt; E = S or Se), the distorted octahedral [RhCl(2){o-C(6)H(4)(CH(2)EMe)(2)}(2)]Y (E = S or Se: Y = PF(6); E = Te: Y = Cl) and [RuCl(2){o-C(6)H(4)(CH(2)EMe)(2)}(2)] (E = S, Se or Te), the dithioether-bridged binuclear [{RuCl(2)(p-cymene)}(2){micro-o-C(6)H(4)(CH(2)SMe)(2)}] and the tetrahedral [M'{o-C(6)H(4)(CH(2)EMe)(2)}(2)]BF(4) (M' = Cu or Ag; E = S, Se or Te) have been obtained and characterised by IR and multinuclear NMR spectroscopy ((1)H, (63)Cu, (77)Se{(1)H}, (125)Te{(1)H} and (195)Pt), electrospray MS and microanalyses. Crystal structures of the parent o-C(6)H(4)(CH(2)SMe)(2) and seven complexes are described, which show three different stereoisomeric forms for the chelated ligands, as well as the first example of a bridging coordination mode in [{RuCl(2)(p-cymene)}(2){micro-o-C(6)H(4)(CH(2)SMe)(2)}]. These studies reveal the consequences of the sterically demanding o-xylyl backbone, which typically leads to unusually obtuse E-M-E chelate angles of approximately 100 degrees .     

Controlled assembly of ruthenium complexes through ortho-carborane dithiolate and polysulfide ligands

Treatment of ortho-carborane, n-butyl lithium, sulfur, and [(p-cymene)RuCl(2)](2) in varying ratio led to four new compounds (p-cymene)Ru[S(3)(C(2)B(10)H(10))(2)] (3), [(p-cymene)Ru(2)(μ(2)-S(2)C(2)B(10)H(9))(μ(3)-S(2)C(2)B(10)H(10))](2) (4), [(p-cymene)Ru](2)Ru(μ(2)-η(2):η(2)-S(2)) (μ(2)-η(2):η(1)-S(2)Cl)(μ(2)-S(2)C(2)B(10)H(10))(2) (5), and [(p-cymene)Ru](2)Ru(μ(2)-η(1):η(1)-S(2))(μ(3)-η(2):η(2)-S(4)) (μ(2)-S(2)C(2)B(10)H(10))(2) (6), respectively. In 3, the ruthenium atom is coordinated by three S atoms from a in situ generated tridentate [S(3)(C(2)B(10)H(10))(2)](2-) ligand. 4 consists of two identical dinuclear (p-cymene)Ru(2)(μ(2)-S(2)C(2)B(10)H(9))(μ(3)-S(2)C(2)B(10)H(10)) subunits which connect to each other via the Ru-Ru bond and two bridging o-carborane-1,2-dithiolate ligands. In 4, a Ru-B bond is present. 5 contains a Ru(3)(μ(2)-S)(2)(μ(2)-S(2))(μ(2)-S(2)Cl) core, and the central ruthenium atom is coordinated by seven S atoms in a distorted pentagonal bipyramidal geometry. In 5, a S-Cl bond is generated. 6 has a novel Ru(3)(μ(2)-S)(2)(μ(2)-S(2))(μ(3)-S(4)) core, and the three ruthenium atoms are connected through the two terminal sulfur atoms of the S-S-S-S chain in a μ(3) binding fashion. All the four complexes have been characterized by elemental analysis, mass, NMR, and X-ray crystallography.     

Cyclometallation of arylimines and nitrogen-containing heterocycles via room-temperature C-H bond activation with arene ruthenium(ii) acetate complexes

The reaction of [RuCl(2)(p-cymene)](2) with arylimines and 4 equiv. of KOAc in methanol at room temperature produces stable (N^C)-cyclometallated ruthenium(ii) complexes via C-H bond activation/deprotonation. This method can be applied also to nitrogen-containing molecules: N-phenylpyrazole, 2-phenyl-2-oxazoline and benzo[h]quinoline. N-Phenyl-pyrazole, [RuCl(2)(p-cymene)](2) and diphenylacetylene directly lead to alkyne insertion into the metallacycle C-Ru bond.     

Ruthenium-catalyzed intramolecular cyclization of diazo-β-ketoanilides for the synthesis of 3-alkylideneoxindoles

With [Ru(p-cymene)Cl(2)](2) as catalyst, diazo-β-ketoanilides would undergo intramolecular carbenoid arene C-H bond functionalization to afford 3-alkylideneoxindoles in up to 92% yields. The reaction occurs under mild conditions and exhibits excellent chemoselectivity. The lack of primary KIE (k(H)/k(D) ~ 1) suggests that the reaction should not proceed by rate-limiting C-H bond cleavage; a mechanism involving cyclopropanation of the arene is proposed.     

A tin(IV)-ruthenium(II)-tin(IV) cyclic porphyrin trimer with replaceable chiral linings

A series of cyclic metalloporphyrin trimers, Ru(CO)(py)[Sn(carboxylate)2](2)2, having cavities lined with different carboxylate groups are synthesized by adding the appropriate carboxylic acids to the mixed trimer Ru(CO)(py)-[Sn(OH)2](2)2. This methodology provides ready access to a wide range of cavities lined with substituents possessing chirality or hydrogen-bonding groups. The potential of such systems is illustrated by synergistic binding of a hydroxypyridine to the Ru(II)-CO center and to the hydroxyl groups of a D-quinate-lined cavity. The effect of changing the carboxylate lining of the cavity on the course of epoxidation reactions catalyzed by these trimers is also reported.     

Synthesis and intramolecular and interionic structural characterization of half-sandwich (arene)ruthenium(II) derivatives of bis(pyrazolyl)alkanes

Arene ruthenium(II) complexes containing bis(pyrazolyl)methane ligands have been prepared by reacting the ligands L' (L' in general; specifically L(1) = H(2)C(pz)(2), L(2) = H(2)C(pz(Me2))(2), L(3) = H(2)C(pz(4Me))(2), L(4) = Me(2)C(pz)(2) and L(5) = Et(2)C(pz)(2) where pz = pyrazole) with [(arene)RuCl(mu-Cl)](2) dimers (arene = p-cymene or benzene). When the reaction was carried out in methanol solution, complexes of the type [(arene)Ru(L')Cl]Cl were obtained. When L(1), L(2), L(3), and L(5) ligands reacted with excess [(arene)RuCl(mu-Cl)](2), [(arene)Ru(L')Cl][(arene)RuCl(3)] species have been obtained, whereas by using the L(4) ligand under the same reaction conditions the unexpected [(p-cymene)Ru(pzH)(2)Cl]Cl complex was recovered. The reaction of 1 equiv of [(p-cymene)Ru(L')Cl]Cl and of [(p-cymene)Ru(pzH)(2)Cl]Cl with 1 equiv of AgX (X = O(3)SCF(3) or BF(4)) in methanol afforded the complexes [(p-cymene)Ru(L')Cl](O(3)SCF(3)) (L' = L(1) or L(2)) and [(p-cymene)Ru(pzH)(2)Cl]BF(4), respectively. [(p-cymene)Ru(L(1))(H(2)O)][PF(6)](2) formed when [(p-cymene)Ru(L(1))Cl]Cl reacts with an excess of AgPF(6). The solid-state structures of the three complexes, [(p-cymene)Ru{H(2)C(pz)(2)}Cl]Cl, [(p-cymene)Ru{H(2)Cpz(4Me))(2)}Cl]Cl, and [(p-cymene)Ru{H(2)C(pz)(2)}Cl](O(3)SCF(3)), were determined by X-ray crystallographic studies. The interionic structure of [(p-cymene)Ru(L(1))Cl](O(3)SCF(3)) and [(p-cymene)Ru(L')Cl][(p-cymene)RuCl(3)] (L' = L(1) or L(2)) was investigated through an integrated experimental approach based on NOE and pulsed field gradient spin-echo (PGSE) NMR experiments in CD(2)Cl(2) as a function of the concentration. PGSE NMR measurements indicate the predominance of ion pairs in solution. NOE measurements suggest that (O(3)SCF(3))(-) approaches the cation orienting itself toward the CH(2) moiety of the L(1) (H(2)C(pz)(2)) ligand as found in the solid state. Selected Ru species have been preliminarily investigated as catalysts toward styrene oxidation by dihydrogen peroxide, [(p-cymene)Ru(L(1))(H(2)O)][PF(6)](2) being the most active species.     

Experimental and computational investigation of C-N bond activation in ruthenium N-heterocyclic carbene complexes

A combination of experimental studies and density functional theory calculations is used to study C-N bond activation in a series of ruthenium N-alkyl-substituted heterocyclic carbene (NHC) complexes. These show that prior C-H activation of the NHC ligand renders the system susceptible to irreversible C-N activation. In the presence of a source of HCl, C-H activated Ru(I(i)Pr(2)Me(2))'(PPh(3))(2)(CO)H (1, I(i)Pr(2)Me(2) = 1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene) reacts to give Ru(I(i)PrHMe(2))(PPh(3))(2)(CO)HCl (2, I(i)PrHMe(2) = 1-isopropyl-4,5-dimethylimidazol-2-ylidene) and propene. The mechanism involves (i) isomerization to a trans-phosphine isomer, 1c, in which hydride is trans to the metalated alkyl arm, (ii) C-N cleavage to give an intermediate propene complex with a C2-metalated imidazole ligand, and (iii) N-protonation and propene/Cl(-) substitution to give 2. The overall computed activation barrier (ΔE(++)(calcd)) corresponds to the isomerization/C-N cleavage process and has a value of +24.4 kcal/mol. C-N activation in 1c is promoted by the relief of electronic strain arising from the trans disposition of the high-trans-influence hydride and alkyl ligands. Experimental studies on analogues of 1 with different C4/C5 carbene backbone substituents (Ru(I(i)Pr(2)Ph(2))'(PPh(3))(2)(CO)H, Ru(I(i)Pr(2))'(PPh(3))(2)(CO)H) or different N-substituents (Ru(IEt(2)Me(2))'(PPh(3))(2)(CO)H) reveal that Ph substituents promote C-N activation. Calculations confirm that Ru(I(i)Pr(2)Ph(2))'(PPh(3))(2)(CO)H undergoes isomerization/C-N bond cleavage with a low barrier of only +21.4 kcal/mol. Larger N-alkyl groups also facilitate C-N bond activation (Ru(I(t)Bu(2)Me(2))'(PPh(3))(2)(CO)H, ΔE(++)(calcd) = +21.3 kcal/mol), and in this case the reaction is promoted by the formation of the more highly substituted 2-methylpropene.     

Copper-catalyzed amidation of 2-phenylpyridine with oxygen as the terminal oxidant

The Cu(OAc)(2)-catalyzed, O(2)-mediated amidation of 2-phenylpyridine via C-H bond activation is reported. A variety of nitrogen reagents including sulfonamides, carboxamides, and anilines participate in the reaction in moderate to good yields.     

Imido transfer from bis(imido)ruthenium(VI) porphyrins to hydrocarbons: effect of imido substituents, C-H bond dissociation energies, and Ru(VI/V) reduction potentials

[Ru(VI)(TMP)(NSO2R)2] (SO2R = Ms, Ts, Bs, Cs, Ns; R = p-C6H4OMe, p-C6H4Me, C6H5, p-C6H4Cl, p-C6H4NO2, respectively) and [Ru(VI)(Por)(NTs)2] (Por = 2,6-Cl2TPP, F20-TPP) were prepared by the reactions of [Ru(II)(Por)(CO)] with PhI=NSO2R in CH2Cl2. These complexes exhibit reversible Ru(VI/V) couple with E(1/2) = -0.41 to -0.12 V vs Cp2Fe(+/0) and undergo imido transfer reactions with styrenes, norbornene, cis-cyclooctene, indene, ethylbenzenes, cumene, 9,10-dihydroanthracene, xanthene, cyclohexene, toluene, and tetrahydrofuran to afford aziridines or amides in up to 85% yields. The second-order rate constants (k2) of the aziridination/amidation reactions at 298 K were determined to be (2.6 +/- 0.1) x 10(-5) to 14.4 +/- 0.6 dm3 mol(-1) s(-1), which generally increase with increasing Ru(VI/V) reduction potential of the imido complexes and decreasing C-H bond dissociation energy (BDE) of the hydrocarbons. A linear correlation was observed between log k' (k' is the k2 value divided by the number of reactive hydrogens) and BDE and between log k2 and E(1/2)(Ru(VI/V)); the linearity in the former case supports a H-atom abstraction mechanism. The amidation by [Ru(VI)(TMP)(NNs)2] reverses the thermodynamic reactivity order cumene > ethylbenzene/toluene, with k'(tertiary C-H)/k'(secondary C-H) = 0.2 and k'(tertiary C-H)/k'(primary C-H) = 0.8.     

Selective and catalytic arylation of N-phenylpyrrolidine: sp3 C-H bond functionalization in the absence of a directing group

We herein describe our studies on arylation of N-phenylpyrrolidine, which led to the development of a new transformation for the direct and selective arylation of sp3 C-H bonds in the absence of a directing group. In this method, Ru(H)2(CO)(PCy3)3 4 was used as the catalyst, and preliminary mechanistic studies suggested that Ru(Ph)(I)(CO)(PCy3)2 5 is the key intermediate of the catalytic cycle. A large kinetic isotope effect (kH/kD = 5.4) was observed, which supports the proposal that C-H bond metalation is the slow step. Preliminary examination of the substrate scope showed that in addition to N-phenylpyrrolidine, N-methyl- and N-benzylpyrrolidine, as well as N-benzoylpyrrolidine, were arylated under the reaction conditions.     

Ruthenium-catalyzed stereoselective intramolecular carbenoid C-H insertion for beta- and gamma-lactam formations by decomposition of alpha-diazoacetamides

[reaction: see text] An operationally simple catalytic system based on [RuCl(2)(p-cymene)(2)] was developed for stereoselective cyclization of alpha-diazoacetamides by intramolecular carbenoid C-H insertion, and beta-lactams were produced in excellent yields and >99% cis-stereoselectivity. The Ru-catalyzed reactions can be performed without the need for slow addition of diazo compounds and inert atmosphere. With alpha-diazoanilides as substrate, the carbenoid insertion was directed selectively to aromatic C-H bond leading to gamma-lactam formation (>95% yield).     

Turning on red and near-infrared phosphorescence in octahedral complexes with metalated quinones

We report the synthesis of π-bonded ruthenium, rhodium, and iridium o-benzoquinones [Cp*M(o-C(6)H(4)O(2))](n) [M = Ru (2), n = 1-; Rh (3), n = 0; Ir (4), n = 0] following a novel synthetic procedure. Compounds 2-4 were fully characterized by spectroscopic methods and used as chelating organometallic linkers, "OM-linkers", toward luminophore bricks such as Ru(bpy)(2)(2+), Rh(ppy)(2)(+), and Ir(ppy)(2)(+) (bpy = 2,2'-bipyridine; ppy = 2-phenylpyridine) for the design of a novel family of octahedral bimetallic complexes of the general formula [(L-L)(2)M(OM-linkers)][X](m) (X = counteranion; m = 0, 1, 2) whose luminescent properties depend on the choice of the OM-linker and the luminophore brick. Thus, dinuclear assemblies such as [(bpy)(2)Ru(2)][OTf] (5-OTf), [(bpy)(2)Ru(2)][Δ-TRISPHAT] (5-ΔT) {TRISPHAT = tris[tetrachlorobenzene-1,2-bis(olato)]phosphate}, [(bpy)(2)Ru(3)][OTf](2) (6-OTf), [(bpy)(2)Ru(4)][OTf](2) (7-OTf), [(bpy)(2)Ru(4)][Δ-TRISPHAT](2) (7-ΔT), [(ppy)(2)Rh(2)] (8), [(ppy)(2)Rh(3)][OTf] (9-OTf), [(ppy)(2)Rh(4)][OTf] (10-OTf), [(ppy)(2)Rh(4)][Δ-TRISPHAT] (10-ΔT), [(ppy)(2)Ir(2)] (11), [(ppy)(2)Ir(3)][OTf] (12-OTf), [(ppy)(2)Ir(4)][OTf] (13-OTf), and [(ppy)(2)Ir(4)][Δ-TRISPHAT] (13-ΔT) were prepared and fully characterized. The X-ray molecular structures of three of them, i.e., 5-OTf, 8, and 11, were determined. The structures displayed a main feature: for instance, the two oxygen centers of the OM-linker [Cp*Ru(o-C(6)H(4)O(2))](-) (2) chelate the octahedral chromophore metal center, whether it be ruthenium, rhodium, or iridium. Further, the carbocycle of the OM-linker 2 adopts a η(4)-quinone form but with some catecholate contribution due to metal coordination. All of these binuclear assemblies showed a wide absorption window that tailed into the near-IR (NIR) region, in particular in the case of the binuclear ruthenium complex 5-OTf with the anionic OM-linker 2. The latter feature is no doubt related to the effect of the OM-linker, which lights up the luminescence in these homo- and heterobinuclear compounds, while no effect has been observed on the UV-visible and emission properties because of the counteranion, whether it be triflate (OTf) or Δ-TRISPHAT. At low temperature, all of these compounds become luminescent; remarkably, the o-quinonoid linkers [Cp*M(o-C(6)H(4)O(2))](n) (2-4) turn on red and NIR phosphorescence in the binuclear octahedral species 5-7. This trend was even more observable when the ruthenium OM-linker 2 was employed. These assemblies hold promise as NIR luminescent materials, in contrast to those made from organic 1,2-dioxolene ligands that conversely are not emissive.     

Synthesis of the phosphino-fullerene PPh2(o-C6H4)(CH2NMeCH)C60 and its function as an η1-P or η3-P,C2 ligand

Following the method of Prato et al., reaction of C(60), N-methylglycine and o-(diphenylphosphino)benzaldehyde affords PPh(2)(o-C(6)H(4))(CH(2)NMeCH)C(60) (1) in moderate yield. Compound 1 reacts with W(CO)(4)(NCMe)(2) to produce W(CO)(4)(η(3)-PPh(2)(o-C(6)H(4))(CH(2)NMeCH)C(60)) (2), through coordination of the phosphine group and one 6 : 6-ring junction of fullerene. Reaction of 1 and Os(3)(CO)(11)(NCMe) affords Os(3)(CO)(11)(PPh(2)(o-C(6)H(4))(CH(2)NMeCH)C(60)) (3), which undergoes a cluster fragmentation reaction in refluxing toluene to produce Os(CO)(3)(η(3)-PPh(2)(o-C(6)H(4))(CH(2)NMeCH)C(60)) (4). Thermal reaction of 1 and Os(3)(CO)(12) affords 3 and 4. On the other hand, reaction of 1 and Ru(3)(CO)(12) yields only the mononuclear complex Ru(CO)(3)(η(3)-PPh(2)(o-C(6)H(4))(CH(2)NMeCH)C(60)) (5). The structures of 1-3 and 5 were determined by an X-ray diffraction study.     

Structural,spectroscopic, luminescence sensing and TD–DFT theoretical studies of a CuP2N-type complex

Luminescent cuprous complexes are an important class of coordination compounds due to their relative abundance, low cost and ability to display excellent luminescence. The title heteroleptic cuprous complex, [2,2′-bis(diphenylphosphanyl)-1,1′-binaphthyl-κ²P,P′](2-phenylpyridine-κN)copper(I) hexafluoridophosphate, rac-[Cu(C₄₄H₃₂P₂)(C₁₁H₉N)]PF₆, conventionally abbreviated rac-[Cu(BINAP)(2-PhPy)]PF₆ ( I ), where BINAP and 2-PhPy represent 2,2′-bis(diphenylphosphanyl)-1,1′-binaphthyl and 2-phenylpyridine, respectively, is described. In this complex, the asymmetric unit consists of a hexafluoridophosphate anion and a heteroleptic cuprous complex cation, in which the cuprous centre in a CuP₂N coordination triangle is coordinated by two P atoms from the BINAP ligand and by one N atom from the 2-PhPy ligand. Time-dependent density functional theory (TD–DFT) calculations show that the UV–Vis absorption of I should be attributed to ligand-to-ligand charge transfer (LLCT) characteristic excited states. It was also found that the paper-based film of this complex exhibited obvious luminescence light-up sensing for pyridine.     

Formation of a ruthenium(IV)-oxo complex by electron-transfer oxidation of a coordinatively saturated ruthenium(II) complex and detection of oxygen-rebound intermediates in C-H bond oxygenation

A coordinatively saturated ruthenium(II) complex having tetradentate tris(2-pyridylmethyl)amine (TPA) and bidentate 2,2'-bipyridine (bpy), [Ru(TPA)(bpy)](2+) (1), was oxidized by a Ce(IV) ion in H(2)O to afford a Ru(IV)-oxo complex, [Ru(O)(H(+)TPA)(bpy)](3+) (2). The crystal structure of the Ru(IV)-oxo complex 2 was determined by X-ray crystallography. In 2, the TPA ligand partially dissociates to be in a facial tridentate fashion and the uncoordinated pyridine moiety is protonated. The spin state of 2, which showed paramagnetically shifted NMR signals in the range of 60 to -20 ppm, was determined to be an intermediate spin (S = 1) by the Evans' method with (1)H NMR spectroscopy in acetone-d(6). The reaction of 2 with various oraganic substrates in acetonitrile at room temperature afforded oxidized and oxygenated products and a solvent-bound complex, [Ru(H(+)TPA)(bpy)(CH(3)CN)], which is intact in the presence of alcohols. The oxygenation reaction of saturated C-H bonds with 2 proceeds by two-step processes: the hydrogen abstraction with 2, followed by the dissociation of the alcohol products from the oxygen-rebound complexes, Ru(III)-alkoxo complexes, which were successfully detected by ESI-MS spectrometry. The kinetic isotope effects in the first step for the reaction of dihydroanthrathene (DHA) and cumene with 2 were determined to be 49 and 12, respectively. The second-order rate constants of C-H oxygenation in the first step exhibited a linear correlation with bond dissociation energies of the C-H bond cleavage.