TiO2担载镍催化剂上硝基苯液相加氢（英文）

The catalytic hydrogenation of nitrobenzene to aniline employing nickel impregnated on rutile,anatase,and high surface area titania supports has been investigated.The nickel is present in elemental state as fcc phase on the catalyst as evidenced by X-ray diffraction results.The Ni crystallite size was found to be greater for Ni/anatase.The temperature-programmed reduction results suggest a greater metal-support interaction for Ni/rutile.The observed order of catalytic activity for the hydrogenation of nitrobenzene is Ni/rutile > Ni/anatase > Ni/TiO2.A conversion of 99% was observed for Ni/rutile at 140 oC and hydrogen pressure of 1.96 MPa.Interestingly,aniline is the only product formed which demonstrates the catalytic hydrogenation of nitrobenzene proceeds with atom economy.Both Ni/rutile and Ni/anatase exhibited a better stability than Ni/TiO2.The hydrogenation proceeds with the preferential adsorption of hydrogen on nickel present in the catalyst surface,possibly assisted by TiOx species.     

A New Method of Synthesis of Azo Schiff Base Ligands with Azo and Azomethine Donors： Synthesis of N-4-Methoxybenzylidene-2-（3-hydroxyphenylazo）-5-hydroxyaniline and Its Nickel（Ⅱ） Complex

A new method for the synthesis of azo Schiff an base ligand in which the azo and azomethine groups are coordination sites was developed through a Schiff base precursor. The precursor, N-4-methoxybenzylidene-3-hydroxyphenylamine （SB） derived from 3-aminophenol was regioselectively coupled with a diazonium ion para to the hydroxyl group of the amine component of the Schiff base. The para selectivity was controlled by the directing effect of the hydroxyl group. The ligand and its nickel（Ⅱ） complex were characterized by elemental analyses, IR and UV-Vis spectroscopy. The analytical and spectral data supported the mononuclear formulation of the complex with metal to ligand ratio （M ： L = 1 ： 2） and suggested a square planar geometry for the complex.     

A novel and efficient strategy for the synthesis of various carbamates using carbamoyl chlorides under solvent-free and grinding conditions using microwave irradiation

We present an efficient,fast and simple strategy of generating the intermediate carbamoyl chlorides from secondary amines using stoichiometric amounts of bis(trichloromethyl)carbonate(BTC) in solution and solvent-free conditions with excellent yields.The results obtained showed the yield increasing on whether a base was used.Finally,an efficient and rapid synthesis of variety carbamate derivatives was developed by the reaction with a high variety of different alcohols,phenols,diols and this intermediate at room temperature with grinding and in solvent-free conditions under microwave irradiation.The presence of various safe bases is shown to be effective in reducing the reaction times,increasing the yields and easing purification.The present method does not involve any hazardous phosgene.     

Copper catalyzed/mediated direct B–H alkenylation/alkynylation in carboranes

Base metal catalyzed regioselective cage B–H functionalization has been achieved. Under the assistance of a bidentate directing group, Cu-catalyzed [4+2] annulation of carboranyl amides with internal alkynes affords unprecedented C,B-substituted carborane-fused-pyridone derivatives, whereas the use of terminal alkynes leads to B–H/C(sp)–H dehydrocoupling products. The isolation and structural identification of a notably stable Cu(Ⅰ) intermediate shed light on the reaction mechanism, which is proposed to involve a Cu(Ⅲ) intermediate.     

Nano palladium catalyzed C(sp3)-H bonds arylation by a transient directing strategy

Reported herein is the first example of heterogeneous palladium catalyzed C(sp³)-H bonds arylation by a transient-ligand-directed strategy.Using supported palladium(metallic state) na nopariticles as catalyst,a wide range of aryl iodides undergo the coupling with various o-methylbenzaldehyde derivatives to assemble a library of highly selective and functionalized o-benzylbenzaldehydes.The stability of the catalyst was easily recovered four runs without significant loss of activity.The XPS analysis of the catalyst before and after reaction indicated that the reaction might be carried out by a catalytic cycle starting with Pd~0.     

A NEW METHOD FOR THE PREPARATION OF PHENOLS AND ITS DERIVATIVES

a-Oxo ketene dithioacetals 2 via 1,2-nucleophilie addition by methallyl magnesius chloride afforded corresponding alcohols (3). Treated with water or methanol and catalyzed by Lewis acid, the alcohols 3 were converted regiospecifical ly to substituted phenols 5' or related phenol methyl ethers 5 respectively. This reaction is a novel approach to the synthesis of phenols and their derivatives starting from non-aromatic precursors.     

Studies on the Adsorption and Dissociation of Methane and Carbon Dioxide on Nickel Catalysts

The adsorption and dissociation of methane and carbon dioxide for reforming on nickel catalysts were extensively investigated by TPSR, TPD, XPS and pulse reaction methods. These studies showed that the decomposition of methane results in the formation of at least three kinds of surface carbon species on supported nickel catalysts. Carbidic Cα, carbonaceous Cβ and carbidic clusters C-γ surface carbon species formed by the decomposition of methane demonstrated different surface mobility, thermal stability and reactivity. Carbidic Cα is a very active and important intermediate in carbon dioxide reforming with methane, and the carbidic clusters Cγ species might be the precursor of surface carbon deposition. The partially dehydrogenated Cβ species can react with H2 or CO2 to form CH4 or CO. On the other hand, it was proven that CO2 can be weakly adsorbed on supported nickel catalysts, and only one kind of CO2 adsorption state is formed. The interaction mechanism between the species dissociated from CH4     

乙烷氧化脱氢用Ni/Al2O3催化剂中活性镍物种前驱体（英文）

Ni/Al2O3 catalysts for oxidative dehydrogenation(ODH) of ethane were prepared by impregnation of Al2O3 with nickel acetate or nickel nitrate,and by mechanical mixing of NiO and Al2O3.The Ni-based catalysts were characterized by N2 adsorption-desorption,X-ray diffraction,diffuse reflectance UV-visible diffuse reflectance spectroscopy,and temperature-programmed reduction of hydrogen.The results showed that formation of crystalline NiO particles with a size of < 8 nm and/or non-stoichiometric NiO species in the Ni/Al2O3 catalysts led to more active species in ODH of ethane under the investigated reaction conditions.In contrast,tetrahedral Ni species present in the catalysts led to higher selectivity for ethene.Formation of large crystalline NiO particles(22-32 nm) over Ni/Al2O3 catalysts decreased the selectivity for ethene.     

Synthesis of Novel Glycidol Copolymers with Pendant Alkene and Hydroxyl Groups

A series of linear poly glycidol copolymers, tethering with both alkene and hydroxyl groups, were prepared by a combination of anionic ring-opening polymerization （ROP） using specific reactions of ethoxy ethyl glycidyl ether （EEGE） and allyl glycidyl ether （AGE） firstly, and subsequently removal of the protection group of glycidol in EEGE to achieve the linear copolymer pendant with both hydroxyl groups and double bonds. The EEGE/AGE monomer reactivity ratio is measured to be 3.30/1.13. The chemical compositions of the as-synthesized polymers were characterized by tH NMR and GPC, and the glass transition temperatures （Tg） of as-synthesized polymers were determined by DSC. The final copolymers have abundant double bonds and hydroxyl as side groups. Furthermore, the ratio of the double bonds to hydroxyl groups can be controlled by the ratio of the starting materials in a wide range.     

Ni catalysts supported on nanocrystalline magnesium oxide for syngas production by CO2 reforming of CH4

CO2 reforming of methane (CDRM) was carried out over MgO supported Ni catalysts with various Ni loadings. The preparation of MgO supported Ni catalysts via surfactant-assisted precipitation method led to the formation of a nanocrystalline carrier for nickel catalysts. The synthesized samples were characterized by XRD, N2 adsorption-desorption, H2 chemisorption, TPR, TPO and SEM techniques. It was found that the high catalytic activity and stability of the prepared catalysts could be attributable to high dispersion of reduced Ni species and basicity of support surface. In addition, the effect of feed ratio, nickel loading and GHSV on the catalytic performance of CDRM over the catalysts were investigated.     

碘甲烷在碳酸二甲酯直接合成中的作用

Dimethyl carbonate (DMC) is an environmentally friendly compound and a substitutive intermediate for highly toxic phosgene or dimethyl sulfate in carbonylation and methylation reactions as well as a promising octane booster. The common methods for its preparation are the oxidative carbonylation of methanol catalyzed by a variety of transition metal ions and the transesterification of ethylene carbonate or propene carbonate with methanol[1]. The direct synthesis of DMC from carbon dioxide and methanol is a challenging route in which the most abundant carbon resources and a main greenhouse gas is used as feedstock. A new method for the direct synthesis of DMC catalyzed by the methoxide of main group metal has attracted more and more attention since it was reported[2～6] . However the lower conversion of the reaction has become the main obstacle for its application. In this letter, an efficient promoter for the direct synthesis of DMC is reported.     

Facile,one-pot synthesis of new phenanthridine derivatives through 1,4-dipolar cycloaddition of phenantridine,activated acetylenes,and aromatic aldehydes

A facile, one-pot synthesis of new phenanthridine derivatives by a three-component reaction between phenantridine, dialkyl acetylenedicarboxylates（DAADs）, and aromatic aldehydes is described. The reaction is characterized by mild conditions, high selectivity, and tolerance to various functional groups.     

Studies on the Adsorption and Dissociation of Methane and Carbon Dioxide on Nickel

The adsorption and dissociation of methane and carbon dioxide for reforming on nickel catalysts were extensively investigated by TPSR, TPD, XPS and pulse reaction methods. These studies showed that the decomposition of methane results in the formation of at least three kinds of surface carbon species on supported nickel catalysts. Carbidic Cα, carbonaceous Cβ and carbidic clusters Cγ surface carbon species formed by the decomposition of methane demonstrated different surface mobility, thermal stability and reactivity. Carbidic Cα is a very active and important intermediate in carbon dioxide reforming with methane, and the carbidic clusters Cγ species might be the precursor of surface carbon deposition. The partially dehydrogenated Cβ species can react with H2 or CO2 to form CH4 or CO. On the other hand, it was proven that CO2 can be weakly adsorbed on supported nickel catalysts, and only one kind of CO2 adsorption state is formed. The interaction mechanism between the species dissociated from CH4 and CO2 during reforming was then hypothesized.     

Theoretical Study on the Mechanism of a New Synthesis Reaction of 1,3,5-Substituted-1,2,4-triazoles by Carboxylic Acids,Amidines,and Hydrazines

The synthesis of 1,3,5-substituted-1,2,4-triazoles from α-imino-3-pyridine formic acid,acetamidine and anisole hydrazine as a model reaction in this paper and the synthesis mechanism of 1,3,5-substituted-1,2,4-triazole compounds from carboxylic acids,amidines and hydrazines have been first investigated with the B3 LYP/6-311++G** method.According to the potential energy profile,it can be predicted that the course of the reaction consists of five reactions containing six elementary reactions.The α-imino-3-pyridine formic acid and acetamidine form first an intermediate product through a dehydration reaction; the intermediate product further combines with hydrogen ion to form a positive ion; the positive ion reacts with anisole hydrazine by a dehydration reaction to form another positive ion; then,followed by two isomerization reactions,the final reaction with the acetate ion(Ac-) produces the final product.The research results reveal the laws of synthesis reaction of 1,3,5-substituted-1,2,4-triazoles by the carboxylic acids,amidines,hydrazines and their derivatives on theoretical level.It provides the systemic theoretical basis for the synthesis,development and application of 1,3,5-substituted-1,2,4-triazole compounds.     

Synthesis of phenol-class azo derivatives of 4-aminosalicylic acid

To explore the better prodrug of 4-aminosalicylic acid（4-ASA）with higher activity and less side effects against the inflammatory bowel disease.4-ASA,after a succession of synthesis process,was conjugated with various carder molecules to get seven azo derivatives of 4-ASA.All compounds were characterized by FT-IR,^1H NMR,^13C NMR spectras in detail.New derivatives of 4-ASA were definituded.     

An Efficient One-pot Synthesis of β-Amino/β-Acetamido Carbonyl Compounds via ZrCl4-catalyzed Mannich-type Reaction

Zirconium(IV) chloride catalyzed efficient one-pot synthesis of β-amino/β-acetamido carbonyl compounds at room temperature is described. In the presence of ZrCl4, the three-component Mannich-type reaction via a variety of in situ generated aldimines, with various ketones, aromatic aldehydes and aromatic amines in ethanol, led to the formation of β-amino carbonyl compounds and the four-component Mannich-type reaction of aromatic aldehydes with various ketones, acetonitrile and acetyl chloride resulted in the corresponding β-acetamido carbonyl compounds in high to excellent yields. This methodology has also been applied towards the synthesis of dimeric β-amino/β-acetamido carbonyl compounds.     

Cyclic Iodine Reagents Enable Allylic Alcohols for Alkyl Boronate Addition/Rearrangement by Photoredox Catalysis

All-carbon quaternary centers are prevalent in bioactive small molecules.However,their efficient construction remains a formidable synthetic challenge.Here we report cyclic iodine(Ⅲ)reagents enable the synthesis of cyclopentanones,cyclohexanones,and dihydrofuranones bearing a-quaternary centers by photoredox catalysis.The reaction proceeds by the formation of the novel cyclic iodine(Ⅲ)reagent-allylic alcohol complex,which enables the first alkyl boronate addition and semi-pinacol rearrangement of allylic alcohols with dual alcohol and olefin activation.The reaction is suitable for gram scale synthesis and is transformable to alcohols,olefins,oximes,and lactones with an α-quaternary center in one step.     

Synthesis of Nitroanilines Catalyzed by Horseradish Peroxidase in the Presence of NaNO2 and H2O2

The synthesis of nitroanilines catalyzed by horseradish peroxidase（HRP） in the presence of sodium nitrite and hydrogen peroxide was investigated, o-Nitroaniline and p-nitroaniline were found in the nitrated products. 2-Aminotoluene and 4-aminotoluene could also be nitrated to give corresponding nitrated products. This protocol has great potentials to open new avenues useful for the synthesis of nitroaniline and its derivatives.     

Unprecedented synthesis of chiral calix[4](aza)crowns and its potent encapsulating methanol

Unprecedented synthesis of chiral (aza)crown ethers of calix[4]arene derivatives bearing a carboxyl amide bridge was described. The synthesis proceeds through condensation of the corresponding dinitriles with optically active 1,2-aminoalcohols,and is catalyzed by the ZnCl2 Lewis acid at elevated temperature in a very efficient one-pot process. The cavity of calix[4](aza)crowns can encapsulate methanol molecules by O—H...π interaction,which has been confirmed by X-ray crystal structures and ESI-MS.     

Electrodeposition mechanism of Ni-Mo-P alloy in the solution of ammoniac citrate

The induced codeposition mechanism of Mo, P and Ni from the solution of ammoniac citrate was studied by means of steady-state polarization, AC impedance and X-ray Photoelectron Spectroscopy (XPS). The result of electrochemical measurements proved that [NiCit(NH3)2]- is the electro-active species of nickel, though nickel ions exist mainly as [NiCit(NH3)3]- in ammoniac citrate. XPS experiments proved the existence of tetravalent molybdenum corresponding to MoO2 on the surface of some deposits. The intermediate product, MoO2, was probably reduced to Mo in the alloy deposit by atomic hydrogen adsorbed on the induced metal nickel. The reduction of H2PO2- occurs through two distinctive steps with PH3 as an intermediate, which subsequently reacts with atomic hydrogen to form P in the alloy deposit. The electrodeposition mechanism was proposed in this paper.