Synthesis and characterization of a family of structurally characterized dysprosium alkoxides for improved fatigue-resistance characteristics of PDyZT thin films

Using either an ammoniacal route, the reaction between DyCl3, Na0, and HOR in liquid ammonia, or preferentially reacting Dy(N(SiMe3)2)3 with HOR in a solvent, we isolated a family of dysprosium alkoxides as [Dy(mu-ONep)2(ONep)]4 (1), (ONep)2Dy[(mu3-ONep)(mu-ONep)Dy(ONep)(THF)]2(mu-ONep) (2), (ONep)2Dy[(mu3-ONep)(mu-ONep)Dy(ONep)(py)]2(mu-ONep) (3), [Dy3(mu3-OBut)2(mu-OBut3(OBut)4(HOBut)2] (4), [Dy3(mu3-OBut)2(mu-OBut)3(OBut)4(THF)2] (5), [Dy3(mu3-OBut)2(mu-OBut)3(OBut)4(py)2] (6), (DMP)Dy(mu-DMP)4[Dy(DMP)2(NH3)]2 (7), [Dy(eta6-DMP)(DMP)2]2 (8), Dy(DMP)3(THF)3 (9), Dy(DMP)3(py)3 (10), Dy(DIP)3(NH3)2 (11), [Dy(eta6-DIP)(DIP)2]2 (12), Dy(DIP)3(THF)2 (13), Dy(DIP)3(py)3 (14), Dy(DBP)3(NH3) (15), Dy(DBP)3 (16), Dy(DBP)3(THF) (17), Dy(DBP)3(py)2 (18), [Dy(mu-TPS)(TPS2]2 (19), Dy(TPS)3(THF)3 (20), and Dy(TPS)3(py)3 (21), where ONep = OCH2CMe3, OBut) = OCMe3, DMP = OC6H3(Me)(2)-2,6, DIP = OC6H3(CHMe2)(2)-2,6, DBP = OC6H3(CMe3)(2)-2,6, TPS = OSi(C6H5)3, tol = toluene, THF = tetrahydrofuran, and py = pyridine. We were not able to obtain X-ray quality crystals of compounds 2, 8, and 9. The structures observed and data collected for the Dy compounds are consistent with those reported for its other congeners. A number of these precursors were used as Dy dopants in Pb(Zr0.3Ti0.7)O3 (PZT 30/70) thin films, with compound 12 yielding the highest-quality films. The resulting Pb0.94Dy0.04(Zr0.3Ti0.7)O3 [PDyZT (4/30/70)] had similar properties to PZT (30/70), but showed substantial resistance to polarization reversal fatigue.     

Synthesis of eta1-borazine complexes of palladium and platinum

The eta(1)-borazine complexes trans-[(Cy(3)P)(2)M(Br)(Br(2)B(3)N(3)H(3))] (Cy = cyclohexyl) were prepared by oxidative addition of a B-Br bond of (BrBNH)(3) to [M(PCy(3))(2)] (M = Pd, Pt). Furthermore the platinum compound was converted into the T-shaped cationic complex trans-[(Cy(3)P)(2)Pt(Br(2)B(3)N(3)H(3))][BAr(f)(4)] [Ar(f) = 3,5-(CF(3))(2)C(6)H(3)] by addition of Na[BAr(f)(4)].     

Fluorotrimethylsilane affinities of anionic nucleophiles: A study of fluoride-induced desilylation

In this study, preparation and decomposition of five novel pentavalent fluorosiliconates, RSi(CH3)3F- (R = CH3CH2O, CF3CH2O, (CH3)2CHO, (CH3)3SiO, and (CH3)3SiNH) is used to investigate the process of fluoride-induced desilylation. The siliconates were characterized by collision-induced dissociation and energy-resolved mass spectrometry. Decomposition of RSi(CH3)3F- leads to loss of the nucleophile R- and FSi(CH3)3, except in the case of (CH3)3SiNHSi(CH3)3F-, where HF loss is also observed. Ion affinities for FSi(CH3)3 have been measured for all five nucleophiles, and compare well with computational predictions. The observed trend of the bond dissociation energies resembles the trend of deltaH(acid) values for the corresponding conjugate acids, RH. Additionally, this data has been incorporated with existing thermochemistry to derive fluoride affinities for four of the silanes (R = CH3CH2O, (CH3)2CHO, (CH3)3SiO, and (CH3)3SiNH). We use the fluoride affinity of the silanes and the FSi(CH3)3 affinity of the departing nucleophilic anion to assess the feasibility of fluoride-induced desilylation of the silanes examined in this work.     

Synthesis and Evaluation of Thioether-Based Tris-Melamines as Components of Self-Assembled Aggregates Based on the CA.M Lattice

Two new tris-melamine derivatives, triazine-thio-M(3) (5) (C(3)N(3)-2,4,6-[SCH(2)C(6)H(4)-3-N(CH(2)C(6)H(4)-4-C(CH(3))(3))COC(6)N(3)-2-NHC(3)N(3)(NH(2))(NHCH(2)CH(2)C(CH(3))(3))-5-Br](3)) and benzene-thio-M(3) (6) (C(6)H(3)-1,3,5-[SCH(2)C(6)H(4)-3-N(CH(2)C(6)H(4)-4-C(CH(3))(3))COC(6)H(3)-2-NHC(3)N(3)(NH(2))(NHCH(2)CH(2)C(CH(3))(3))-5-Br](3)), were synthesized by reactions of 2,4,6-trithiocyanuric acid and 1,3,5-trimercaptobenzene with a bromobenzyl melamine derivative 19 (BrCH(2)C(6)H(4)-3-N(CH(2)C(6)H(4)-4-C(CH(3))(3))COC(6)H(3)-2-NHC(3)N(3)(NH(2))(NHCH(2)CH(2)C(CH(3))(3))-5-Br). These two compounds formed stable and structurally well-defined 1 + 3 supramolecular aggregates with neohexyl isocyanurate (R'CA) (9) as shown by NMR spectroscopy and gel permeation chromatography. (1)H NMR competition experiments indicated that the stability of triazine-thio-M(3).(R'CA)(3) (1) was similar to that of benzene-thio-M(3).(R'CA)(3) (2). The order of stabilities of tris-melamine-based 1 + 3 complexes was hubM(3).(R'CA)(3) (3) > triazine-thio-M(3).(R'CA)(3) (1) approximately benzene-thio-M(3).(R'CA)(3) (2) > flexM(3).(R'CA)(3) (4). Computational simulations were also carried out on triazine-thio-M(3).(R'CA)(3) and hubM(3).(R'CA)(3) fully solvated in CHCl(3). Values of DP (the deviation from planarity of the cyanuric acid and melamine rosette) obtained from these simulations correlated correctly with the observed stabilities and suggested a structural reason why triazine-thio-M(3).(R'CA)(3) was less stable than hubM(3).(R'CA)(3).     

Preparation of benzyl azide complexes of iridium(III)

Hydride complexes IrHCl(2)(PiPr(3))P(2) (1) and IrHCl(2)P(3) (2) [P = P(OEt)(3) and PPh(OEt)(2)] were prepared by allowing IrHCl(2)(PiPr(3))(2) to react with phosphite in refluxing benzene or toluene. Treatment of IrHCl(2)P(3), first with HBF(4).Et(2)O and then with an excess of ArCH(2)N(3), afforded benzyl azide complexes [IrCl(2)(eta(1)-N(3)CH(2)Ar)P(3)]BPh(4) (3, 4) [Ar = C(6)H(5), 4-CH(3)C(6)H(4); P = P(OEt)(3), PPh(OEt)(2)]. Azide complexes reacted in CH(2)Cl(2) solution, leading to the imine derivative [IrCl(2){eta(1)-NH=C(H)C(6)H(5)}P(3)]BPh(4) (5). The complexes were characterized by spectroscopy and X-ray crystal structure determination of [IrCl(2)(eta(1)-N(3)CH(2)C(6)H(5)){P(OEt)(3)}(3)]BPh(4) (3a) and [IrCl(2){eta(1)-NH=C(H)C(6)H(5)}{P(OEt)(3)}(3)]BPh(4) (5a). Both solid-state structure and (15)N NMR data indicate that the azide is coordinated through the substituted Ngamma [Ir]-Ngamma(CH(2)Ar)NNalpha nitrogen atom.     

A convenient synthesis of new isolable phosphaalkenes using the base-induced rearrangement of secondary vinylphosphines

The secondary vinylphosphines Ar(F)P(H)C(R)[double bond]CH(2) [2a, Ar(F) = 2,6-(CF(3))(2)C(6)H(3), R = CH(3); 2b, Ar(F) = 2,6-(CF(3))(2)C(6)H(3), R = C(6)H(5); 2c, Ar(F) = 2,4,6-(CF(3))(3)C(6)H(2), R = CH(3)] were prepared by treating the corresponding dichlorophosphine Ar(F)PCl(2) (1) with H(2)C[double bond]C(R)MgBr. In the presence of catalytic base (DBU or DABCO) the vinylphosphines (2a-c) undergo quantitative 1,3-hydrogen migration over 3 d to give stable and isolable phosphaalkenes Ar(F)P=C(R)CH(3) (3a, Ar(F) = 2,6-(CF(3))(2)C(6)H(3), R = CH(3); 3b, Ar(F) = 2,6-(CF(3))(2)C(6)H(3), R = C(6)H(5); 3c, Ar(F) = 2,4,6-(CF(3))(3)C(6)H(2), R = CH(3)). Under analogous conditions, only 90% conversion is observed in the base-catalyzed rearrangement of MesP(H)C(CH(3))[double bond]CH(2) to MesP[double bond]C(CH(3))(2). Presumably, the increase in acidity of the P-H group when electron-withdrawing groups are employed (i.e. 2a-c) favors quantitative rearrangement to the phosphaalkene tautomer (3a-c). Thus, the double-bond migration reaction is a convenient and practical method of preparing new phosphaalkenes with C-methyl substituents.     

Synthesis and Characterization of Sterically Encumbered Derivatives of Aluminum Hydrides and Halides: Assessment of Steric Properties of Bulky Terphenyl Ligands

The synthesis and characterization of several sterically encumbered monoterphenyl derivatives of aluminum halides and aluminum hydrides are described. These compounds are [2,6-Mes(2)C(6)H(3)AlH(3)LiOEt(2)](n)() (1), (Mes = 2,4,6-Me(3)C(6)H(2)-), 2,6-Mes(2)C(6)H(3)AlH(2)OEt(2) (2), [2,6-Mes(2)C(6)H(3)AlH(2)](2) (3), 2,6-Mes(2)C(6)H(3)AlCl(2)OEt(2) (4), [2,6-Mes(2)C(6)H(3)AlCl(3)LiOEt(2)](n)() (5), [2,6-Mes(2)C(6)H(3)AlCl(2)](2) (6), TriphAlBr(2)OEt(2) (7), (Triph = 2,4,6-Ph(3)C(6)H(2)-), [2,6-Trip(2)C(6)H(3)AlH(3)LiOEt(2)](2) (8) (Trip = 2,4,6-i-Pr(3)C(6)H(2)-), 2,6-Trip(2)C(6)H(3)AlH(2)OEt(2) (9), [2,6-Trip(2)C(6)H(3)AlH(2)](2) (10), 2,6-Trip(2)C(6)H(3)AlCl(2)OEt(2) (11), and the partially hydrolyzed derivative [2,6-Trip(2)C(6)H(3)Al(Cl)(0.68)(H)(0.32)(&mgr;-OH)](2).2C(6)H(6) (12). The structures of 2, 3a, 4, 6, 7, 9a, 10a, 10b, 11, and 12 were determined by X-ray crystallography. The structures of 3a, 9a, 10a, and 10b, are related to 3, 9, and 10, respectively, by partial occupation of chloride or hydride by hydroxide. The compounds were also characterized by (1)H, (13)C, (7)Li, and (27)Al NMR and IR spectroscopy. The major conclusions from the experimental data are that a single ortho terphenyl substituent of the kind reported here are not as effective as the ligand Mes (Mes = 2,4,6-t-Bu(3)C(6)H(2)-) in preventing further coordination and/or aggregation involving the aluminum centers. In effect, one terphenyl ligand is not as successful as a Mes substituent in masking the metal through agostic and/or steric effects.     

Hydrodefluorination of pentafluoropyridine at rhodium using dihydrogen: detection of unusual rhodium hydrido complexes

The pentafluoropyridyl complex [Rh(4-C5NF4)(PEt3)3] (3) reacts with H2 to give initially the dihydrido complex cis-mer-[Rh(H)2(4-C5NF4)(PEt3)3] (6). Within a few hours 2,3,5,6-tetrafluoropyridine as well as two rhodium(III) complexes mer-[Rh(H)3(PEt3)3] (mer-) and fac-[Rh(H)3(PEt3)3] (fac-) are formed. A catalytic C-F activation process for the formation of 2,3,5,6-tetrafluoropyridine starting from pentafluoropyridine and dihydrogen using 3 as a catalyst has been developed. Reaction of [RhH(PEt3)3] (1) with hydrogen affords fac-[Rh(H)3(PEt3)3] (fac-7) and mer-[Rh(H)3(PEt3)3] (mer-7) in a ratio of 1 : 7.25 at 193 K. The latter complex represents the first mononuclear rhodium compound bearing trans-hydrides.     

p-tert-Butylcalix[4]arene complexes of molybdenum and tungsten: reactivity of the calixarene methylene C-H bond and the facile migration of the metal around the phenolic rim of the calixarene

p-tert-Butylcalix[4]arene, [CalixBut(OH)4], reacts with Mo(PMe3)6 and W(PMe3)4(eta2-CH2PMe2)H to yield compounds of composition {[CalixBut(OH)2(O)2]M(PMe3)3H2} which exhibit unprecedented use of a C-H bond of a calixarene methylene group as a binding functionality in the form of agostic and alkyl hydride derivatives. Thus, X-ray diffraction studies demonstrate that, in the solid state, the molybdenum complex [CalixBut(OH)2(O)2]Mo(PMe3)3H2 exists as an agostic derivative with a Mo...H-C interaction, whereas the tungsten complex exists as a metallated trihydride [Calix-HBut(OH)2(O)2]W(PMe3)3H3. Solution 1H NMR spectroscopic studies, however, provide evidence that [Calix-HBut(OH)2(O)2]W(PMe3)3H3 is in equilibrium with its agostic isomer [CalixBut(OH)2(O)2]W(PMe3)3H2. Dynamic NMR spectroscopy also indicates that the [M(PMe3)3H2] fragments of both the molybdenum and tungsten complexes [CalixBut(OH)2(O)2]M(PMe3)3H2 migrate rapidly around the phenolic rim of the calixarene on the NMR time scale, an observation that is in accord with incorporation of deuterium into the methylene endo positions upon treatment of the isomeric mixture of [CalixBut(OH)2(O)2]W(PMe3)3H2 and [Calix-HBut(OH)2(O)2]W(PMe3)3H3 with D2. Treatment of {[CalixBut(OH)2(O)2]W(PMe3)3H2} with Ph2C2 gives the alkylidene complex [CalixBut(O)4]W=C(Ph)Ar [Ar = PhCC(Ph)CH2Ph].     

Preparation of tungsten alkyl alkylidene alkylidyne complexes and kinetic studies of their formation

An equilibrium mixture of alkyl alkylidyne W(CH2SiMe3)3(CSiMe3)(PMe3) (1a) and its bis(alkylidene) tautomer W(CH2SiMe3)2(=CHSiMe3)2(PMe3) (1b) has been found to undergo an alpha-hydrogen abstraction reaction in the presence of PMe3 to form alkyl alkylidene alkylidyne W(CH2SiMe3)(=CHSiMe3)(CSiMe3)(PMe3)2 (2). In the presence of PMe3, the formation of 2 follows first-order kinetics, and the observed rate constant was found to be independent of the concentration of PMe3. The activation parameters for the formation of 2 are Delta H = 28.3(1.7) kcal/mol and Delta S = 3(5) eu. In the presence of PMe2Ph, an equilibrium mixture of W(CH2SiMe3)3(CSiMe3)(PMe2Ph) (3a) and its bis(alkylidene) tautomer W(CH2SiMe3)2(=CHSiMe3)2(PMe2Ph) (3b) was similarly converted to W(CH2SiMe3)(=CHSiMe3)(CSiMe3)(PMe2Ph)2 (4). The observed rate of this reaction was also independent of the concentration of PMe2Ph. These observations suggest a pathway in which the tautomeric mixtures 1a,b and 3a,b undergo rate-determining, alpha-hydrogen abstraction, followed by phosphine coordination, resulting in the formation of the alkyl alkylidene alkylidyne complexes 2 and 4.     

Sensitivity of silver(I) complexes of a pyrimidine-hydrazone ligand to solvent, counteranion, and metal-to-ligand ratio changes

Metal complexation studies were performed with AgSO(3)CF(3) and AgBF(4) and the ditopic pyrimidine-hydrazone ligand 6-(hydroxymethyl)pyridine-2-carboxaldehyde (2-methylpyrimidine-4,6-diyl)bis(1-methylhydrazone) (1) in both CH(3)CN and CH(3)NO(2) in a variety of metal-to-ligand ratios. The resulting complexes were studied in solution by NMR spectroscopy and in the solid state by X-ray crystallography. Reacting either AgSO(3)CF(3) or AgBF(4) with 1 in either CH(3)CN or CH(3)NO(2) in a 1:1 metal-to-ligand ratio produced a double helicate in solution. This double helicate could be converted into a linear complex by increasing the metal-to-ligand ratio; however, the degree of conversion depended on the solvent and counteranion used. Attempts to crystallize the linear AgSO(3)CF(3) complex resulted in crystals with the dimeric structure [Ag(2)1(CH(3)CN)(2)](2)(SO(3)CF(3))(4) (2), while attempts to crystallize the AgSO(3)CF(3) double helicate from CH(3)CN resulted in crystals of another dimeric complex, [Ag(2)1(SO(3)CF(3))(CH(3)CN)(2)](2)(SO(3)CF(3))(2)·H(2)O (3). The AgSO(3)CF(3) double helicate was successfully crystallized from a mixture of CH(3)CN and CH(3)NO(2) and had the structure [Ag(2)1(2)](SO(3)CF(3))(2)·3CH(3)NO(2) (4). The linear AgBF(4) complex could not be isolated from the double helicate in solution; however, crystals grown from a solution containing both the AgBF(4) double helicate and linear complexes in CH(3)CN had the structure [Ag(2)1(CH(3)CN)(2)](BF(4))(2) (5). The AgBF(4) double helicate could only be crystallized from CH(3)NO(2) and had the structure [Ag(2)1(2)](BF(4))(2)·2CH(3)NO(2) (6).     

The role of Zn-OR and Zn-OH nucleophiles and the influence of para-substituents in the reactions of binuclear phosphatase mimetics

Analogues of the ligand 2,2'-(2-hydroxy-5-methyl-1,3-phenylene)bis(methylene)bis((pyridin-2-ylmethyl)azanediyl)diethanol (CH(3)H(3)L1) are described. Complexation of these analogues, 2,6-bis(((2-methoxyethyl)(pyridin-2-ylmethyl)amino)methyl)-4-methylphenol (CH(3)HL2), 4-bromo-2,6-bis(((2-methoxyethyl)(pyridin-2-ylmethyl)amino)methyl)phenol (BrHL2), 2,6-bis(((2-methoxyethyl)(pyridin-2-ylmethyl)amino)methyl)-4-nitrophenol (NO(2)HL2) and 4-methyl-2,6-bis(((2-phenoxyethyl)(pyridin-2-ylmethyl)amino)methyl)phenol (CH(3)HL3) with zinc(II) acetate afforded [Zn(2)(CH(3)L2)(CH(3)COO)(2)](PF(6)), [Zn(2)(NO(2)L2)(CH(3)COO)(2)](PF(6)), [Zn(2)(BrL2)(CH(3)COO)(2)](PF(6)) and [Zn(2)(CH(3)L3)(CH(3)COO)(2)](PF(6)), in addition to [Zn(4)(CH(3)L2)(2)(NO(2)C(6)H(5)OPO(3))(2)(H(2)O)(2)](PF(6))(2) and [Zn(4)(BrL2)(2)(PO(3)F)(2)(H(2)O)(2)](PF(6))(2). The complexes were characterized using (1)H and (13)C NMR spectroscopy, mass spectrometry, microanalysis, and X-ray crystallography. The complexes contain either a coordinated methyl- (L2 ligands) or phenyl- (L3 ligand) ether, replacing the potentially nucleophilic coordinated alcohol in the previously reported complex [Zn(2)(CH(3)HL1)(CH(3)COO)(H(2)O)](PF(6)). Functional studies of the zinc complexes with the substrate bis(2,4-dinitrophenyl) phosphate (BDNPP) showed them to be competent catalysts with, for example, [Zn(2)(CH(3)L2)](+), k(cat) = 5.70 ± 0.04 × 10(-3) s(-1) (K(m) = 20.8 ± 5.0 mM) and [Zn(2)(CH(3)L3)](+), k(cat) = 3.60 ± 0.04 × 10(-3) s(-1) (K(m) = 18.9 ± 3.5 mM). Catalytically relevant pK(a)s of 6.7 and 7.7 were observed for the zinc(II) complexes of CH(3)L2(-) and CH(3)L3(-), respectively. Electron donating para-substituents enhance the rate of hydrolysis of BDNPP such that k(cat)p-CH(3) > p-Br > p-NO(2). Use of a solvent mixture containing H(2)O(18)/H(2)O(16) in the reaction with BDNPP showed that for [Zn(2)(CH(3)L2)(CH(3)COO)(2)](PF(6)) and [Zn(2)(NO(2)L2)(CH(3)COO)(2)](PF(6)), as well as [Zn(2)(CH(3)HL1)(CH(3)COO)(H(2)O)](PF(6)), the (18)O label was incorporated in the product of the hydrolysis suggesting that the nucleophile involved in the hydrolysis reaction was a Zn-OH moiety. The results are discussed with respect to the potential nucleophilic species (coordinated deprotonated alcohol versus coordinated hydroxide).     

Reaction of m-terphenyldichlorophosphanes with sodium azide: synthesis and characterization of stable azidocyclophosphazenes

Reaction of the m-terphenyldichlorophosphanes 2,6-(2-MeC(6)H(4))(2)C(6)H(3)PCl(2) (1), 2,6-(4-t-BuC(6)H(4))(2)C(6)H(3)PCl(2) (2), or 2,6-Mes(2)C(6)H(3)PCl(2) (3) with excess NaN(3) in acetonitrile at room temperature afforded the corresponding bisazidophosphanes 2,6-(2-MeC(6)H(4))(2)C(6)H(3)P(N(3))(2), 2,6-(4-t-BuC(6)H(4))(2)C(6)H(3)P(N(3))(2) (5), or 2,6-Mes(2)C(6)H(3)P(N(3))(2) (6) (Mes = 2,4,6-Me(3)C(6)H(2)), respectively. These compounds are thermally labile and decompose into a number of azidophosphazenes. The azidocyclophosphazenes [NP(N(3))(C(6)H(3)(4-t-BuC(6)H(4))(2)-2,6)](3) (4) and [NP(N(3))C(6)H(3)Mes(2)-2,6](2) (8) have been isolated from these mixtures. All compounds were characterized by (1)H, (13)C, (31)P NMR and IR spectroscopy. Crystal structures of 2, 4, and 8 were determined.     

Theoretical study of low-lying triplet states of aniline

Multireference complete active space self-consistent-field CASSCF(10,12)/ANO and second-order perturbation theory MS-CASPT2 calculations were performed to determine the vertical low-lying singlet and triplet states of aniline. The sequence of the seven lower lying triplet states is T1(1(3)A'), T2(1(3)A' '), T3(2(3)A'), T4(3(3)A'), T5(2(3)A' '), T6(4(3)A'), and T7(3(3)A' '). The 3(3)A', 4(3)A', and 3(3)A' ' states are assigned as 3s, 3py, and 3pz Rydberg states, respectively, while other states correspond to pi <-- pi excitations. Both the T1 and T2 states are found to be below at the lowest-lying singlet S1 (1(1)A' ') state. Geometry, vibrational modes, and electron distribution of the lowest lying T1 state were determined using UB3LYP calculations. The vertical and adiabatic singlet-triplet energy gaps DeltaE(S0-T1) amount to 3.7 and 3.5 +/- 0.2 eV, respectively. In clear contrast with the S0 state, the triplet aniline is no longer aromatic, and its protonation occurs preferentially at the ring meta-carbon site, with a proton affinity PA = 243 +/- 3 kcal/mol.     

Application of extraction chromatography to the separation of thorium and uranium dissolved in a solution of high salt concentration

Extraction chromatography with commercially available UTEVA resin (for uranium and tetravalent actinide) was applied for the separation of Th and U from control solutions prepared from a multi-element control solution and from sample solutions of solidified simulated waste. Thorium and U in control solutions with 1-5mol/dm(3) HNO(3) were extracted with UTEVA resin and recovered with a solution containing 0.1mol/dm(3) HNO(3) and 0.05mol/dm(3) oxalic acid to be separated from the other metallic elements. Extraction behavior of U in the sample solutions was similar to that in the control solutions, but extraction of Th was dependent on the concentration of HNO(3). Thorium was extracted from 5mol/dm(3) HNO(3) sample solutions but not from 1mol/dm(3) HNO(3) sample solutions. We conjecture that thorium fluoride formation interferes with extraction of Th. Addition of Al(NO(3))(3) and Fe(NO(3))(3), which have higher stability constant with fluoride ion than Th, does improve extractability of Th from 1mol/dm(3) HNO(3) sample solution.     

Synthesis and characterization of octa- and hexanuclear polyoxomolybdate wheels: role of the inorganic template and of the counterion

Eight new compounds based on [O3PCH2PO3]4- ligands and {MoV2O4} dimeric units have been synthesized and structurally characterized. Octanuclear wheels encapsulating various guests have been isolated with different counterions. With NH4+, a single wheel was obtained, as expected, with the planar CO32- guest, (NH4)12[(MoV2O4)4(O3PCH2PO3)4(CO3)2].24H2O (1a), while with the pyramidal SO32- guest, only the syn isomer (NH4)12[(MoV2O4)4(O3PCH2PO3)4(SO3)2].26H2O (2a) was characterized. The corresponding anti isomer was obtained with Na+ as counterions, Na12[(MoV2O4)4(O3PCH2PO3)4(SO3)2]39H2O (2b), and with mixed Na+ and NH4(+) counterions, Na+(NH4)11[(MoV2O4)4(O3PCH2PO3)4(SO3)2].13H2O (2d). With [O3PCH2PO3]4- extra ligands, the octanuclear wheel Li12(NH4)2[(MoV2O4)4(O3PCH2PO3)4(HO3PCH2PO3)2].31H2O (4a) was isolated with Li+ and NH4+ counterions and Li14[(MoV2O4)4(O3PCH2PO3)4(HO3PCH2PO3)2].34H2O (4c) as a pure Li+ salt. A new rectangular anion, formed by connecting two MoV dimers and two MoVI octahedra via methylenediphosphonato ligands with NH4+ as counterions, (NH4)10[(MoV2O4)2(MoVIO3)2(O3PCH2PO3)2(HO3PCH2PO3)2].15H2)O (3a), and Li9(NH4)2Cl[(MoV2O4)2(MoVIO3)2(O3PCH2PO3)2]. 22H2O (3d) as a mixed NH4+ and Li+ salt have also been synthesized. The structural characterization of the compounds, combined with a study of their behavior in solution, investigated by 31P NMR, has allowed a discussion on the influence of the counterions on the structure of the anions and their stability. Density functional theory calculations carried out on both isomers of the [(MoV2O4)4(O3PCH2PO3)4(SO3)2]12- anion (2), either assumed isolated or embedded in a continuum solvent model, suggest that the anti form is favored by approximately 2 kcal mol(-1). Explicit insertion of two solvated counterions in the molecular cavity reverses this energy difference and reduces it to less than 1 kcal mol(-1), therefore accounting for the observed structural versatility.     

Si(CH3)3Cl分子电离电势和化学键能的测定

The photoionization spectroscopy of Si(CH3)3Cl in the range of 50 -130 nm was studied with synchrotron radiation source. The adiabatic ionization potentials of molecule Si(CH3)3Cl and radical Si(CH3)3 are 10.06 ±0.02 eV and 7.00±0.03 eV respectively. In addition, the appearance potentials of Si(CH3)2Cl+, Si(CH3)3+, SiCl+ and SiCH3+ were determined:
AP(Si(CH3)2Cl+) ＝10.49±0.02eV, AP(Si(CH3)3+) ＝ 11.91 ±0.02eV
AP(SiCl+) ＝ 18.64 ±0.06eV, AP(SiCH3+)＝ 18.62 ±0.02eV
From these, some chemical bond energies of Si(CH3)3Cl+ were calculated:
D(Si(CH3)2Cl+ - CH3) ＝0.43 ±0.02eV, D(Si(CH3)3+ - Cl) ＝ 1.85 ± 0.02eV
D(SiCH3+ - (2CH3 ＋ Cl)) ＝ 8.56 ± 0．06eV, D(SiCH3+ - 2CH3) ＝6.71±0．06eV
D(SiCl+ - 3CH3) ＝ 8.58 ± 0.06eV, D(SiCl＋- 2CH3) ＝ 8.15 ±0.06eV
D(SiCH3+- (CH3 ＋ Cl)) ＝8.13 ±0.06eV     

Deprotonation-substitution reactions of cyclic methylphenylphosphazenes: synthesis and structures of nongeminal P-ethyl,P-phenyl cyclotriphosphazenes

The deprotonation-substitution reactions of both the cis and trans isomers of nongeminally substituted [(Me)(Ph)P=N](3) were investigated. Treatment of the trans isomer, 1, with 3 equiv of n-BuLi followed by 3 equiv of MeI gave only nongeminal trans-[(Et)(Ph)P=N](3), 3, while the same reaction sequence on cis-[(Me)(Ph)P=N](3), 2, gave a mixture of nongeminal di- and trisubstitution products, cis-Et(2)MePh(3)P(3)N(3), 4, and cis-Et(3)Ph(3)P(3)N(3), 5. These trimers were separated by column chromatography. No changes in the stereochemistry of the rings occurred during these reactions. Compound 4 was also prepared using 2 equiv of the reactants and was then converted to 5 by treatment with a single equivalent of BuLi and MeI. Thermal analysis of the new cyclic trimers indicates that ring-opening polymerization does not occur and that sublimation occurs at ca. 300 degrees C. The structures of 4 and 5, obtained by X-ray diffraction, illustrate the basketlike shape of these molecules with an aromatic bowl formed by the phenyl rings on the top rim, while the structure of 3 clearly shows the trans orientation of the substituents. Crystal data for trans-Et(3)Ph(3)P(3)N(3), 3, at 20 degrees C are as follows: C(24)H(30)N(3)P(3) monoclinic, a = 14.273(2) A, b = 9.370(2) A, c = 19.600(3) A, beta = 107.16(1) degrees, P2(1/n), Z = 4. Crystal data for cis-Et(2)MePh(3)P(3)N(3), 4, at 20 degrees C are as follows: C(23)H(28)N(3)P(3), triclinic, a = 10.276(2) A, b = 10.699(2) A, c = 11.925(2) A, alpha = 72.07(2) degrees, beta = 73.79(1) degrees, gamma = 85.87(1) degrees, P1, Z = 2. Crystal data for cis-Et(3)Ph(3)P(3)N(3), 5, at 20 degrees C are as follows: C(24)H(30)N(3)P(3) monoclinic, a = 29.488(2) A, b = 9.8391(1) A, c = 21.172(2) A, beta = 126.30(1) degrees, C2/c, Z = 8.     

Syntheses of mono- and dinuclear diiodoboryl complexes of platinum

Treatment of [Pt(PCy(3))(2)] (Cy = cyclohexyl) with BI(3) afforded trans-[(Cy(3)P)(2)Pt(I)(BI(2))] by the oxidative addition of a B-I bond. The title compound represents the first diiodoboryl complex and was fully characterized by NMR spectroscopy and X-ray diffraction analysis. The latter revealed a very short Pt-B distance, thus indicating a pronounced pi contribution to this bond. By the addition of another 1 equiv of BI(3) to trans-[(Cy(3)P)(2)Pt(I)(BI(2))], a new Pt species [(Cy(3)P)(I(2)B)Pt(mu-I)](2) was formed with concomitant buildup of the phosphine borane adduct [Cy(3)P-BI(3)]. The former is obviously obtained by abstraction of PCy(3) from trans-[(Cy(3)P)(2)Pt(I)(BI(2))] and the subsequent dimerization of two remaining fragments. Interestingly, the dimerization is reversible, and the dinuclear compound can be converted to trans-[(Cy(3)P)(2)Pt(I)(BI(2))] upon the addition of PCy(3).     

Synthesis and reactivity of silyl ruthenium complexes: the importance of trans effects in C-H activation,Si-C bond formation,and dehydrogenative coupling of silanes

A series of octahedral ruthenium silyl hydride complexes, cis-(PMe(3))(4)Ru(SiR(3))H (SiR(3) = SiMe(3), 1a; SiMe(2)CH(2)SiMe(3), 1b; SiEt(3), 1c; SiMe(2)H, 1d), has been synthesized by the reaction of hydrosilanes with (PMe(3))(3)Ru(eta(2)-CH(2)PMe(2))H (5), cis-(PMe(3))(4)RuMe(2) (6), or (PMe(3))(4)RuH(2) (9). Reaction with 6 proceeds via an intermediate product, cis-(PMe(3))(4)Ru(SiR(3))Me (SiR(3) = SiMe(3), 7a; SiMe(2)CH(2)SiMe(3), 7b). Alternatively, 1 and 7 have been synthesized via a fast hydrosilane exchange with another cis-(PMe(3))(4)Ru(SiR(3))H or cis-(PMe(3))(4)Ru(SiR(3))Me, which occurs at a rate approaching the NMR time scale. Compounds 1a, 1b, 1d, and 7a adopt octahedral geometries in solution and the solid state with mutually cis silyl and hydride (or silyl and methyl) ligands. The longest Ru-P distance within a complex is always trans to Si, reflecting the strong trans influence of silicon. The aptitude of phosphine dissociation in these complexes has been probed in reactions of 1a, 1c, and 7a with PMe(3)-d(9) and CO. The dissociation is regioselective in the position trans to a silyl ligand (trans effect of Si), and the rate approaches the NMR time scale. A slower secondary process introduces PMe(3)-d(9) and CO in the other octahedral positions, most likely via nondissociative isomerization. The trans effect and trans influence in 7a are so strong that an equilibrium concentration of dissociated phosphine is detectable (approximately 5%) in solution of pure 7a. Compounds 1a-c also react with dihydrogen via regioselective dissociation of phosphine from the site trans to Si, but the final product, fac-(PMe(3))(3)Ru(SiR(3))H(3) (SiR(3) = SiMe(3), 4a; SiMe(2)CH(2)SiMe(3), 4b; SiEt(3), 4c), features hydrides cis to Si. Alternatively, 4a-c have been synthesized by photolysis of (PMe(3))(4)RuH(2) in the presence of a hydrosilane or by exchange of fac-(PMe(3))(3)Ru(SiR(3))H(3) with another HSiR(3). The reverse manifold - HH elimination from 4a and trapping with PMe(3) or PMe(3)-d(9) - is also regioselective (1a-d(9)() is predominantly produced with PMe(3)-d(9) trans to Si), but is very unfavorable. At 70 degrees C, a slower but irreversible SiH elimination also occurs and furnishes (PMe(3))(4)RuH(2). The structure of 4a exhibits a tetrahedral P(3)Si environment around the metal with the three hydrides adjacent to silicon and capping the P(2)Si faces. Although strong Si...HRu interactions are not indicated in the structure or by IR, the HSi distances (2.13-2.23(5) A) suggest some degree of nonclassical SiH bonding in the H(3)SiR(3) fragment. Thermolysis of 1a in C(6)D(6) at 45-55 degrees C leads to an intermolecular CD activation of C(6)D(6). Extensive H/D exchange into the hydride, SiMe(3), and PMe(3) ligands is observed, followed by much slower formation of cis-(PMe(3))(4)Ru(D)(Ph-d(5)). In an even slower intramolecular CH activation process, (PMe(3))(3)Ru(eta(2)-CH(2)PMe(2))H (5) is also produced. The structure of intermediates, mechanisms, and aptitudes for PMe(3) dissociation and addition/elimination of H-H, Si-H, C-Si, and C-H bonds in these systems are discussed with a special emphasis on the trans effect and trans influence of silicon and ramifications for SiC coupling catalysis.