Square‐Wave Voltammetry of Sodium Copper Chlorophyllin on Glassy‐Carbon and Paraffin‐Impregnated Graphite Electrode

Electrochemical oxidation of sodium copper chlorophyllin (CHL) has been investigated at a glassy‐carbon (GC) and paraffin‐impregnated graphite electrode (PIGE) using square‐wave voltammetry (SWV). Square‐wave voltammograms of other two chlorin‐type compounds, namely chlorin e₆ and chlorophyll a, have been studied as well. The measurements were performed in the pH range between 7 and 11. The square‐wave frequency was changed between 8 and 1000 Hz. The oxidation of studied chlorins is a complex, pH‐independent, reversible or quasireversible process, followed by the chemical transformation of the product. The product of the EC reaction of CHL is an electroactive π? π dimer, which strongly adsorbs on the electrode surface and undergoes further oxidation at more positive potential. The electrooxidation of the adsorbed dimer is a pH‐independent irreversible process with the formation of an electroinactive film. The voltammetric behaviour of chlorin e₆ on PIGE was qualitatively similar to that of CHL. The SW voltammograms of chlorin e₆ recorded on GCE and of chlorophyll a recorded on PIGE consisted of only one peak. The SW responses of studied compounds strongly depend on the stabilization of the reaction intermediate by adsorption to the electrode surface.     

Electroanalysis of the Anthelmintic Drug Bithionol at Edge Plane Pyrolytic Graphite Electrode

An electrochemical study of the anthelmintic drug bithionol using edge plane pyrolytic graphite electrode (EPPGE) is presented for the first time by applying different electrochemical techniques, such as cyclic voltammetry (CV), square‐wave voltammetry (SWV), square‐wave adsorptive stripping voltammetry (SWAdSV), and alternating current (AC) impedance spectroscopy. Mechanistic aspects of the electrode reaction were studied implying a quasireversible electrode reaction from an adsorbed state of the reactant, coupled with a follow‐up chemical reaction to a final electroinactive product. The overall mechanism appears totally irreversible under conditions of CV at moderate scan rate, while being quasireversible under conditions of the fast SWV. Furthermore, an optimisation of the analytical procedure for quantitative determination of bithionol was conducted by applying SWV in an adsorptive stripping mode. The calibration curve was constructed in the concentration range of 0.1–1.0 μmol L^?1 (R²=0.9984) with a sensitivity of 3.6 μA L μmol^?1 and LOD of 26.7 nmol L^?1. The simple and sensitive SWAdSV procedure was proved to be suitable for the analysis of spiked urine samples.     

Electroanalysis of Pyridoxine at Copper Nanoparticles Modified Polycrystalline Gold Electrode

Pyridoxine is analyzed using square wave voltammetry (SWV) at copper nanoparticles (nano‐Cu) modified poly‐crystalline gold electrode (nano‐Cu/Au). Nano‐Cu/Au is fabricated by a potential scan electrodeosition technique. Nano‐Cu/Au electrode has been characterized morphologically and electrochemically. The analysis of pyridoxine at nano‐Cu/Au electrode is achieved utilizing the quenching of copper voltammetric response due to the complexation with pyridoxine forming an electroinactive complex. Pyridoxine selectively forms complex with copper ions (modifier), but not with Au (underlying substrate) as supported by UV/Vis spectrophotometry. Using SWV the calibration curve for pyridoxine analysis was obtained in the concentration range of 0.3–2.7 µM with high correlation coefficient. The proposed method has been successfully applied for the determination of pyridoxine in two dosage forms.     

Electrocatalytic Oxidation and Voltammetric Determination of L‐Cysteic Acid at the Surface of p‐Bromanil Modified Carbon Paste Electrode

The electrochemical properties of L ‐cysteic acid studied at the surface of p‐bromanil (tetrabromo‐p‐benzoquinone) modified carbon paste electrode (BMCPE) in aqueous media by cyclic voltammetry (CV) and double step potential chronoamperometry. It has been found that under optimum condition (pH 7.00) in cyclic voltammetry, the oxidation of L ‐cysteic acid at the surface of BMCPE occurs at a half‐wave potential of p‐bromanil redox system (e.g., 100 mV vs. Ag|AgCl|KCl_sat), whereas, L ‐cysteic acid was electroinactive in the testing potential ranges at the surface of bare carbon paste electrode. The apparent diffusion coefficient of spiked p‐bromanil in paraffin oil was also determined by using the Cottrell equation. The electrocatalytic oxidation peak current of L ‐cysteic acid exhibits a linear dependency to its concentration in the ranges of 8.00×10^?6 M–6.00×10^?3 M and 5.2×10^?7 M–1.0×10^?5 M using CV and differential pulse voltammetry (DPV) methods, respectively. The detection limits (2σ) were determined as 5.00×10^?6 M and 4.00×10^?7 M by CV and DPV methods. This method was used as a new, selective, rapid, simple, precise and suitable voltammetric method for determination of L ‐cysteic acid in serum of patient's blood with migraine disease.     

Synthesis,Characterization, and Reactivity of Dyad Ruthenium‐Based Molecules for Light‐Driven Oxidation Catalysis

Dyad molecules containing the 2,3,5,6‐tetrakis(2‐pyridyl)pyrazine (tppz) ligand with general formula [(tpy)Ru(μ‐tppz)Ru(X)(L‐L)]ⁿ⁺ (X=Cl, CF₃COO, or H₂O; L‐L=2,2′‐bipyridine (bpy) or 3,5‐bis(2‐pyridyl)pyrazole (Hbpp); tpy=2,2′:6′,2“‐terpyridine) have been prepared, purified, and isolated. The complexes have been characterized by analytical and spectroscopic techniques and by X‐ray diffraction analysis for two of them. Additionally, full electrochemical characterization based on cyclic voltammetry, differential pulse voltammetry, and square wave voltammetry has been also performed. The pH dependence of the redox couples for the aqua complexes have also been studied and their corresponding Pourbaix diagrams drawn. Furthermore, their capacity to catalytically oxidize organic substrates, such as alcohols, alkenes, and sulfides, has been carried out chemically, electrochemically, and photochemically. Finally, their capacity to behave as water oxidation catalysts has also been tested.     

Study on the Electrochemical Behavior of Melatonin with an Activated Electrode

It was found that melatonin could be incorporated and accumulated on the surface of the glassy carbon electrode which was activated electrochemically by pretreatment in sodium hydroxide solution by means of cycling the potential well into the positive limit of the solvent. In Britton‐Robinson buffer solution (pH 6.7), melatonin gave a sensitive oxidation wave at a potential of +0.65 V (vs.Ag/AgCl) by using Osteryoung square‐wave stripping voltammetry (OSWSV). The oxidation process has been shown to be irreversible and adsorption‐controlled at this electrode by means of cyclic voltammetry and linear sweep voltammetry. A chronocoulometric characterization of the adsorption characteristics of melatonin at this electrode is also presented. The factors affecting the peak current were optimized, and the dependence of peak currents on the concentration of melatonin was found to be linear in the range 8.0×10^?7?1.0×10^?5 mol L^?1. A detection limit of 5.0×10^?8 mol L^?1 was obtained (signal‐to‐noise ratio of 3). This method was applied to the assay of melatonin in tablets and capsules with good recoveries (98–100%).     

Direct Electroanalysis of p‐Nitrophenol (PNP) in Estuarine and Surface Waters by a High Sensitive Type C/p‐NiTSPc Coating Carbon Fiber Microelectrode (CFME)

We report for the first time on the elaboration of a remarkable sensitivity type C/p‐NiTSPc carbon fiber microelectrode (CFME) for p‐nitrophenol (PNP) pollutant. We observed the best performances using square wave voltammetry (SWV) technique in the place of differential pulse voltammetry (DPV). Also the combination of p‐NiTSPc optimized cycles of electrodeposition and accumulation time, helped us to increase remarkably the sensor slope (320 times) and the limit of detection (LOD) (1000 times), with a final LOD of 0.1 µg/L, the current regulatory limit for drinkable waters. Furthermore the recoveries of the standards added are close to 100 % indicating that the method has some suitability. The proposed voltammetric procedure might be applied for organophosphorus pesticides and their by‐products with a remarkable sensing in natural polluted waters.     

Electroanalysis of Carbendazim using MWCNT/Ca‐ZnO Modified Electrode

The present research involves the report on electrochemical deportment of Carbendazim (MBC) at multiwalled carbon nanotubes and calcium‐doped zinc oxide nanoparticles altered nanocomposite based carbon paste electrode (MWCNTs/Ca‐ZnO‐CPE). The modified carbon paste evidenced manifest electrocatalytic behavior for MBC in 0.2 M phosphate buffer (PB) solutions. Cyclic voltammetry (CV), linear sweep voltammetry (LSV), and square wave voltammetry (SWV) techniques were used for the analysis. The working electrode assembly exhibits faster electron transfer of MBC with increase in the peak current. At bare CPE, MBC showed maximum peak current of 1.098 μA at potential 0.7568 V whereas at MWCNT/Ca‐ZnO/CPE peak current of 5.203 μA was observed at potential 0.7541 V in 0.2 M PBS of pH 7.0 at the sweep rate of 50 mV s^?1. The synthesized 5 % Ca‐ZnO nanoparticles (NPs) were characterized by X‐ray diffraction (XRD), Scanning electron microscopy (SEM), Energy dispersive X‐ray analysis (EDX), and Transmission electron microscopy (TEM) analysis. Various factors influencing the voltammetry of MBC such as pre‐concentration time, pH, sweep rate, and amount of MBC were studied and from the studies we observed that the response was found to be diffusion‐controlled. The concentration variation studies for MBC was watched in the linear working range of 0.01 μM to 0.45 μM and the detection limit was found by SWV technique.     

Electrochemical Determination and in silico Studies of Fludarabine on NH2 Functionalized Multiwalled Carbon Nanotube Modified Glassy Carbon Electrode

A sensitive voltammetric technique has been developed for the determination of Fludarabine using amine‐functionalized multi walled carbon nanotubes modified glassy carbon electrode (NH₂‐MWCNTs/GCE). Molecular dynamics simulations, an in silico technique, were employed to examine the properties including chemical differences of Fludarabine‐ functionalized MWCNT complexes. The redox behavior of Fludarabine was examined by cyclic, differential pulse and square wave voltammetry in a wide pH range. Cyclic voltammetric investigations emphasized that Fludarabine is irreversibly oxidized at the NH₂‐MWCNTs/GCE. The electrochemical behavior of Fludarabine was also studied by cyclic voltammetry to evaluate both the kinetic (k_s and E_a) and thermodynamic (ΔH, ΔG and ΔS) parameters on NH₂‐MWCNTs/GCE at several temperatures. The mixed diffusion‐adsorption controlled electrochemical oxidation of Fludarabine revealed by studies at different scan rates. The experimental parameters, such as pulse amplitude, frequency, deposition potential optimized for square‐wave voltammetry. Under optimum conditions in phosphate buffer (pH 2.0), a linear calibration curve was obtained in the range of 2×10^?7 M–4×10^?6 M solution using adsorptive stripping square wave voltammetry. The limit of detection and limit of quantification were calculated 2.9×10^?8 M and 9.68×10^?8 M, respectively. The developed method was applied to the simple and rapid determination of Fludarabine from pharmaceutical formulations.     

Effect of 3‐O‐Galloyl Substitution on the Electrochemical Oxidation of Quercetin and Silybin Galloyl Esters at Glassy Carbon Electrode

The galloyl substitution effect on the antioxidant potential of quercetin‐3‐O‐gallate (QG) and silybin‐3‐O‐gallate (SBG), and the oxidation of QG and SBG were studied by cyclic, differential and square‐wave voltammetry using a glassy carbon electrode, and compared with their structural components, quercetin (Q), silybin (SB), gallic acid and gallic acid methyl ester. Their multi‐step pH‐dependent anodic behaviour, first oxidation followed by oxidation of the hydroxyl groups at ring A, is similar to Q and SB. The galloyl substitution significantly improved the antioxidant potential of SB compared to Q, and brought useful knowledge about the antioxidant activity of Q and SB monogalloyl esters.     

Theoretical Contribution towards Understanding Specific Behaviour of “Simple” Protein‐film Reactions in Square‐wave Voltammetry

Surface reactions of uniformly adsorbed redox molecules at working electrode surface are seen as adequate models to studying chemical reactivity of many lipophilic enzymes. When considered under pulse voltammetric techniques, these systems show several uncommon features, whose origin is still not completely clear. The phenomena of “quasireverible maximum”, “splitting” of the net peak in square‐wave voltammetry, and the very steep descent of Faradaic currents of simple surface redox reactions exhibiting fast electron transfer are just some of the features that make these systems quite interesting for further elaborations. In this work, we present a set of theoretical calculations under conditions of square‐wave voltammetry in order try to explain some of aforementioned phenomena. The major goal of our work is to get insight to some voltammetric and chrono‐amperometric features of two considered surface reactions, i. e. (1) the “simple” surface redox reaction, and (2) surface redox reaction coupled to follow‐up irreversible chemical reaction of electrochemically generated redox species (or surface ECirr). We focus on the role of created Red(ads) (here in the reduction pulses only) to the current components of calculated square‐wave voltammograms exhibiting fast electrode reaction. We show that the irreversible chemical removal of electrochemically generated Red(ads) species, created in the potential pulses where half‐reaction of reduction Ox(ads)+ne‐?→Red(ads) is “defined” to take place, causes significant increase of all square‐wave current components. The results presented in this work show how complex the chrono‐amperometric features of surface redox reactions under pulse voltammetric conditions might be. In addition, we point out that both half reactions of a given simple surface redox process can occur, at both, “only reduction” and “only oxidation” potential pulses in square‐wave voltammetry. This, in turn, contributes to the occurrence of many phenomena observed in simple protein‐film voltammetry reactions. The effects of chemical reaction rate to the features of calculated square‐wave voltammograms of surface ECirr systems with fast electrode reaction are reported for the first time in this work.     

对位叠式循环方波伏安法：Ⅱ.平行催化体系

本文提出平行催化体系的对位叠式循环方波伏安法，并对共作了系统的研究，推导了这一方法的催化电流理论方程，并用验验证这理论的正确性，得到其各脉冲电流皆为同方向，对位叠式循环催化电流相当于将电流叠加４次，而波形不受方波幅度大小的影响，因而灵敏度和分辨率有较大提高，优于其它方波伏安法。     

Development of Quercetin Biosensor Through Immobilizing Laccase in a Modified β‐Cyclodextrin Matrix Containing Ag Nanoparticles in Ionic Liquid

A biosensor containing Ag nanoparticles in ionic liquid (IL) 1‐butyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide (BMI.Tf₂N) and laccase (Lac) immobilized on β‐cyclodextrin modified with epichlorohydrin (β‐CDEpi) was developed for quercetin determination. Lac catalyses the oxidation of quercetin to quinone, which is then reduced on the biosensor surface and the resulting current was investigated by square‐wave voltammetry. The β‐CDEpi support was analyzed by scanning electron microscopy and Ag‐BMI.Tf₂N by transmission electron microscopy and X‐ray diffraction. The linear range (0.499–7.407 μM) and low detection limit (0.037±0.004 μM) show that the proposed biosensor is suitable for quercetin determination in real samples.     

Electroanalytical Determination of N‐Nitrosamines in Aqueous Solution Using a Boron‐Doped Diamond Electrode

The electrochemical methods cyclic and square‐wave voltammetry were applied to develop an electroanalytical procedure for the determination of N‐nitrosamines (N‐nitrosopyrrolidine, N‐nitrosopiperidine and N‐nitrosodiethylamine) in aqueous solutions. Cyclic voltammetry was used to evaluate the electrochemical behaviors of N‐nitrosamines on boron‐doped diamond electrodes. It was observed an irreversible electrooxidation peak located in approximately 1.8 V (vs. Ag/AgCl) for both N‐nitrosamines. The optimal electrochemical response was obtained using the following square‐wave voltammetry parameters: f=250 Hz, E_sw=50 mV and E_s=2 mV using a Britton–Robinson buffer solution as electrolyte (pH 2). The detection and quantification limits determined for total N‐nitrosamines were 6.0×10^?8 and 2.0×10^?7 mol L^?1, respectively.     

Determination of Azidothymidine – an Antiproliferative and Virostatic Drug by Square‐Wave Voltammetry

The 3′‐azido‐3′‐deoxythymidine (AZT, Zidovudine) is an antiproliferative and virostatic drug widely used in human immunodeficiency virus type 1 (HIV‐1) infection treatment. With respect to side effects of high doses and a short half‐life of AZT, a fast and simple detection method for this agent could be helpful. The aim of our study was to determine AZT levels in natural samples (urine, serum, whole blood, and cell cultures, such as the HaCaT line of keratinocytes) without their mineralization and/or purification, by means of electrochemical methods using hanging mercury drop electrode (HMDE). On this electrode, AZT undergoes irreversible reduction at the peak potential near E_p?1.1 V (vs. Ag/AgCl/3 M KCl). Reduction AZT signals were measured by cyclic voltammetry (CV), differential pulse voltammetry (DPV), square‐wave voltammetry (SWV), and constant current chronopotentiometric stripping analysis (CPSA). In phosphate buffer (pH 8) the SWV yielded the best AZT signal with the detection limit of 1 nM. The determination of AZT concentration in biological materials is affected by electroactive components, such as proteins and DNA. For monitoring the influence of these compounds, AZT reduction was performed in the presence of 10 μg/mL calf thymus ssDNA and/or 100 μg/mL bovine serum albumin. In these cases, the detection limit increased to 0.25 μM. Also studied was the AZT concentration in keratinocyte cells (HaCaT line) during cell cultivation. It has been shown that the SWV may be considered as a useful tool for the determination of AZT concentration in cell cultures, and for monitoring AZT pharmacokinetics.     

Trace Determination of Chromium by Square‐Wave Adsorptive Stripping Voltammetry on Bismuth Film Electrodes

This works reports the use of adsorptive stripping voltammetry (AdSV) for the trace determination of chromium on a rotating‐disk bismuth‐film electrode (BFE). During the reductive accumulation step, all the chromium species in the sample were reduced to Cr(III) which was complexed with cupferron and the complex was accumulated by adsorption on the surface of a preplated BFE. The stripping step was carried out by using a square‐wave (SW) potential‐time voltammetric signal. Electrochemical cleaning of the bismuth film was employed, enabling the same bismuth film to be used for a series of measurements in the presence of dissolved oxygen. The experimental variables as well as potential interferences were investigated and the figures of merit of the method were established. Using the selected conditions, the 3σ limit of detection for chromium was 100 ng L^?1 (for 120 s of preconcentration) and the relative standard deviation was 3.6% at the 2 μg L^?1 level (n=8). Finally, the method was applied to the determination of chromium in real samples with satisfactory results.     

Electrochemical Determination of Cu(II) Ions by 4‐Formylphenylboronic Acid Modified Gold Electrode

A self‐assembled monolayer (SAM) modified by 4‐formylphenylboronic acid was formed on the gold electrode, which was applied for the determination of trace concentrations of Cu(II). The formation of advanced SAM on the gold electrode was evidenced by electrochemical impedance spectroscopy, atomic force microscopy and contact angle measurements. Electrochemical determination of Cu(II) ions was performed by square wave voltammetry. Some mutual interferences caused by Cd(II), Co(II), Fe(II), Ni(II) and Pb(II) ions were investigated and it was demonstrated how the negative effects of these interfering ions could be eliminated by adjustment of proper parameters of square wave voltammetry.     

Lead Sensor Using Gold Nanostructured Screen‐Printed Carbon Electrodes as Transducers

Gold nanostructured screen‐printed carbon electrodes are demonstrated to be suitable transducers for the determination of lead using square‐wave voltammetry. Reproducible gold nanostructures have been obtained by direct electrochemical deposition. A calibration plot from 2.5 to 250 μg/L was obtained in acidic solutions of Pb(II) with a reproducibility of 4% (n=10). The detection limit was 0.09 μg/L of lead. The method is then applied to perform a blood lead analysis by adjusting square‐wave parameters in capillary or venous blood with a minimum sample pretreatment and excellent accuracy and reproducibility.     

Heavy Metals in Matrices of Food Interest: Sequential Voltammetric Determination at Trace and Ultratrace Level of Copper,Lead, Cadmium,Zinc, Arsenic,Selenium, Manganese and Iron in Meals

The voltammetric methods are very suitable and versatile techniques for the simultaneous metal determination in complex matrices. The present work, regarding the sequential determination of Cu(II), Pb(II), Cd(II), Zn(II) by square‐wave anodic stripping voltammetry (SWASV), As(III), Se(IV) by square‐wave cathodic stripping voltammetry (SWCSV) and Mn(II), Fe(III) by square‐wave voltammetry (SWV) in matrices involved in foods and food chain as wholemeal, wheat and maize meal, are an interesting example of the possibility to sequentially determine each single element in real samples. Besides the set up of the analytical method, particular attention is aimed either at the problem of possible signal interference or to show that, using the peak area A_p as instrumental datum, it is possible to achieve lower limits of detection. The analytical procedure was verified by the analysis of the standard reference materials: Wholemeal BCR‐CRM 189, Wheat Flour NIST‐SRM 1567a and Rice Flour NIST‐SRM 1568a. Precision, as repeatability, and accuracy, expressed as relative standard deviation and relative error, respectively, were lower than 6% in all cases. In the presence of reciprocal interference, the standard addition method considerably improved the resolution of the voltammetric technique. Once set up on the standard reference materials, the analytical procedure was transferred and applied to commercial meals sampled on market for sale. A critical comparison with spectroscopic measurements is also discussed.