Electrochemical Characteristics of 4‐oxo‐4H‐pyran‐dicarboxylic Acid (Chelidonic Acid) and some of its Metal Complexes

A few novel metal complexes of chelidonic acid (chelH₂), namely [Ca(chel)(H₂O)₃] ( 1 ), [Cu(chel)(H₂O)₅] ⋅ 2H₂O ( 2 ) and [VO(chel)(H₂O)₃] ⋅ 2H₂O ( 3 ) were prepared, identified by elemental analysis and characterized by electrochemical methods. IR‐spectra and thermal stability in solid state are discussed as well. The electrochemical characteristics of the free chelidonic acid and its complexes 1 – 3 were studied by (cyclic) square‐wave voltammetry, on static mercury drop electrode (SMDE) and paraffin‐impregnated graphite electrode (PIGE), in aqueous media over a wide pH range. The reduction of chelidonic acid on SMDE is a kinetically controlled electrode reaction, occurring with the transfer of one electron and two protons for 1<pH<6, whereas in very alkaline media the electron transfer is pH independent, i.e . the mechanism of electro‐reduction of chelH₂ is proposed. The experimental parameters of the electroanalytical procedure were optimized and the method was applied for the investigation of the metal ion coordination preferences toward chelidonic acid. For the direct determination of solid complexes 1 – 3 , SW voltammetry of microparticles was used.     

Electrochemical Characterization of Epigallocatechin Gallate Using Square‐Wave Voltammetry

Electrochemical oxidation of (?)‐epigallocatechin gallate (EGCG), the main monomer flavanol found in green tea, has been investigated over a wide pH range at a glassy‐carbon electrode using square‐wave voltammetry (SWV). Square‐wave voltammograms of (?)‐epigallocatechin (EGC) and gallic acid have been studied as well. The I–E profile of EGCG, i.e. the oxidation potentials and the current responses of the first and the second peak, is pH dependent. The oxidation of EGCG is a quasireversible process over the studied pH range, which was also confirmed by the non‐linear relationship between the peak currents and squre root of frequency. The best SWV responses for EGCG were obtained at pH 2.0, frequency of 100 Hz, step of 2 mV and amplitude of 50 mV. Under these conditions, linear responses for EGCG were obtained for concentrations from 1×10^?7 M to 1×10^?6 M, and calculated LOD and LOQ for the first oxidation peak were 6.59×10^?8 M and 2.19×10^?7 M, respectively. The proposed electroanalytical procedure was applied for the determination of EGCG content in green tea. Developed SWV methodology represents a potential analytical tool in determination of catechins in tea samples.     

Syntheses of Chalcone‐Type Chlorophyll Derivatives Possessing a Bacteriochlorin,Chlorin or Porphyrin π‐System and Their Optical Properties

C3‐(Trans‐2‐arylethenyl)carbonylated chlorophyll derivatives possessing a bacteriochlorin or chlorin π‐system were synthesized by cross‐aldol (Claisen–Schmidt) condensation of methyl pyrobacteriopheophorbide‐a or 3‐acetyl‐3‐devinyl‐pyropheophorbide‐a bearing the C3‐acetyl group with p‐(un)substituted benzaldehydes under basic conditions. The corresponding porphyrin‐type chlorophyll derivatives were prepared by the oxidation (17,18‐didehydrogenation) of the chlorin‐type. Their Qy absorption and fluorescence emission maxima in dichloromethane correlated well with Hammett substituent constants of the p‐substituents. Several electron‐withdrawing p‐substituents suppressed the emission due to photoinduced electron transfer quenching in a molecule. The substitution sensitivities for their maxima and fluorescence quantum yields decreased in the order of bacteriochlorin‐, chlorin‐ and porphyrin‐type derivatives.     

Voltammetric Behavior of Mifepristone (RU‐486) Using Square‐Wave and Adsortive Stripping‐Wave Techniques. Determination in Urine Samples

The behavior of Mifepristone (RU‐486) was studied by square‐wave technique, leading to two methods for its determination in aqueous samples and urine samples at pH 2. The application of the square‐wave (SW) without the adsorptive accumulation and stripping voltammetric (AdSV) show the maximum response at ?0.896 V using an accumulation potential of ?0.5 V. The effect of experimental parameters that affect this determination are discussed. For the stripping technique, Mifepristone proved to be more sensitive, yielding signals four times larger than those obtained by applying a square‐wave scan without the previous accumulation. The calibration plot to determine Mifepristone was linear in the range 2.4×10^?8 and 5.4×10^?7 M by stripping mode with an accumulation time t_acc of 30 s. The relative standard deviation obtained for concentration levels of Mifepristone as low as 2.0×10^?7 M with square‐wave was 1.17% (n=10) and with stripping square‐wave 2.02% (n=10) in the same day. The two proposed methods (SW and SWAdSV) were applied to the determination of Mifepristone in urine.     

Electroanalytical Oxidation of p‐Coumaric Acid

Abstract

The mechanism of the electrochemical oxidation of p‐coumaric acid on a glassy carbon electrode was investigated using cyclic, differential pulse, and square wave voltammetry at different pHs. The oxidation of p‐coumaric acid is irreversible over the whole pH range. After successive scans, the p‐coumaric acid oxidation product deposits on the electrode surface, forming a polymeric film that undergoes reversible oxidation at a lower potential than p‐coumaric acid. This polymeric film increases in thickness with the number of scans, covering the electrode surface, and impeding the diffusion of the p‐coumaric acid and its oxidation on the electrode. The oxidation of p‐coumaric acid is pH dependent up until values close to the pK_a. For pHs higher than pK_a, the p‐coumaric acid oxidation process is pH independent. An electroanalytical determination procedure of p‐coumaric in pH 8.7 0.2 M ammonium buffer was developed, and a detection limit, LOD=83 nM, and the limit of quantification, LOQ=250 nM, were obtained.     

Electrochemical Oxidation of Sulfasalazine at a Glassy Carbon Electrode

Sulfasalazine (SSZ) is a pharmaceutical compound used for the treatment of rheumatoid arthritis. The electrochemical oxidation of SSZ at a glassy carbon electrode was studied by cyclic, differential pulse and square wave voltammetry in a wide pH range. For electrolytes with pH<11.0, the oxidation is an irreversible, diffusion‐control, pH‐dependent process that involves the transfer of one electron and one proton from the hydroxyl group of the salicylic moiety. For pH>11.0 the oxidation is pH‐independent, and a pK_a≈11 was determined. The formation of a quinone‐like oxidation product that undergoes two electrons and two protons reversible redox reaction was observed. Also, UV‐vis spectra of SSZ were recorded as a function of supporting electrolytes pH. An electrochemical oxidation mechanism was proposed.     

One‐Electron Oxidation and Sensitivity of Uric Acid in On‐Line Electrochemistry and in Electrospray Ionization Mass Spectrometry

The sensitivity of detection of uric acid (H₂U) in positive ion mode electrospray ionization mass spectrometry (ESI MS) was enhanced by uric acid oxidation during electrospray ionization. With a carrier solution of pH 6.3>pK_a1=5.4 of H₂U, protonated unoxidized uric acid [H₂U+H]⁺ (m/z 169) was detected together with the protonated uric acid dimer [2H₂U+H]⁺ (m/z 337). The dimer likely forms by 1e^? oxidation of urate (HU^?) followed by rapid radical dimerization. A covalent structure of the dimer was verified by H/D exchange experiments. Efficiency of 2e^?, 2H⁺ oxidation of uric acid is low during ESI in pH 6.3 carrier solution and improves when a low on‐line electrochemical cell voltage is floated on the high voltage of the ES in on‐line electrochemistry ESI MS (EC/ESI MS). The intensity of the uric acid dimer decreases with an increase in the low applied voltage. In a carrier solution with 0.1 M KOH, pH 12.7>pK_a2=9.8 of H₂U, allantoin (Allnt) (MW 158.04), the final 2e^?, 2H⁺ oxidation product of uric acid, was detected as a potassium complex [K(Allnt)+K]⁺ (m/z 235) and the [2H₂U+H]⁺ dimer was not detected. In direct ESI MS analysis of 1000‐fold diluted urine [NaHU+H]⁺ (pK_sp NaHU=4.6) was detected in 40/60 (vol%) water/methanol, 1 mM NH₄Ac, pH ca. 6.3 carrier solution. A new configuration of the ESI MS instrument with a cone‐shaped capillary inlet significantly enhanced sensitivity in ESI and EC/ESI MS measurements of uric acid.     

Square‐Wave Voltammetry of Quasi‐Reversible CE Reactions at Spherical Microelectrodes

A mathematical model for the CE mechanism in which the chemical together with the electrochemical reactions are quasi‐reversible at the surface of spherical macro and micro‐electrodes is presented for the case of square‐wave voltammetry. The analysis of voltammometric responses considers the influence of rate and equilibrium constants, together with the electrode radius, and their dependence on the square‐wave frequency (f). Both kinetics and the sphericity effect act synergistically on the electrochemical response. Also, the apparent electrode sphericity and the reversibility of the chemical as well as the electrochemical reactions are jointly affected by the variation of f. Disregarding the sphericity contribution in the calculation of kinetic parameters at a microelectrode may introduce errors even higher than one order of magnitude. The model allows the analysis of a more realistic and complex electrochemical system that requires not only the dependence of experimental responses on f, but also their fit with theoretical voltammograms, in order to provide some useful mechanistic information. Finally, concentration profiles are also studied to realize how the chemical contribution is buffering the absences of oxidized species at the electrode surface, and how those profiles are modified for the case of spherical macro and micro‐electrodes.     

Electrochemical Investigation of Na‐Salt of 2‐Methyl‐3‐(4‐nitrophenyl)acrylate on Glassy Carbon Electrode

The electrochemical behavior of Na‐salt of 2‐methyl‐3‐(4‐nitrophenyl)acrylate (NPA) and its reduction product was studied by cyclic (CV), differential pulse(DPV) and square wave voltammetry (SWV) using a glassy carbon electrode (GCE). The results revealed that NPA is irreversibly reduced leading to the formation of a reduction product (P_NPA). For pH<9.0 the peak potential was linearly dependent on pH. For pH>9.0 the peak potential was pH‐independent and the value of pK_b≈9.0 was determined. The adsorbed P_NPA exhibited reversible redox reaction. The reduction of P_NPA was pH dependent. To ensure that the electrochemical behavior of NPA is due to the reducible moiety, NO₂, closely related compounds to NPA were also studied, and a redox mechanism was proposed for NPA.     

Theoretical Aspects of a Surface Electrode Reaction Coupled with Preceding and Regenerative Chemical Steps: Square‐wave Voltammetry of a Surface CEC’ Mechanism

Large number of lipophilic substances, whose electrochemical transformation takes place from adsorbed state, belong to the class of so‐called “surface‐redox reactions”. Of these, especially important are the enzymatic redox reactions. With the technique named “protein‐film voltammetry” we can get insight into the chemical features of many lipophilic redox enzymes. Electrochemical processes of many redox adsorbates, occurring at a surface of working electrode, are very often coupled with chemical reactions. In this work, we focus on the application of square‐wave voltammetry (SWV) to study the theoretical features of a surface electrode reaction coupled with two chemical steps. The starting electroactive form Ox_(ads) in this mechanism gets initially generated via preceding chemical reaction. After undergoing redox transformation at the working electrode, Ox_(ads) species got additionally regenerated via chemical reaction of electrochemically generated product Red_(ads) with a given substrate Y. The theory of this so‐called surface CEC’ mechanism is presented for the first time under conditions of square‐wave voltammetry. While we present plenty of calculated voltammograms of this complex electrode mechanism, we focus on the effect of rate of regenerative (catalytic) step to simulated voltammograms. We consider both, electrochemical reactions featuring moderate and fast electron transfer. The obtained voltammetric patterns are very specific, having sometime hybrid‐like features of voltammograms as typical for CE, EC and EC’ mechanisms. We give diagnostic criteria to recognize this complex mechanism in SWV, but we also present hints to access the kinetic and thermodynamic parameters relevant to both chemical steps, and the electrochemical reaction, too. Indeed, the results presented in this work can help experimentalists to design proper experiments to study chemical features of important lipophilic systems.     

Self‐aggregation of Synthetic Zinc Chlorophyll Derivatives Possessing 31‐Hydroxy or Methoxy Group and 131‐Mono‐ or Dicyanomethylene Moiety in Nonpolar Organic Solvents as Models of Chlorosomal Bacteriochlorophyll‐d Aggregates

Methyl 13¹‐(di)cyanomethylene‐pyropheophorbides were synthesized by Knoevenagel reactions of the corresponding 13¹‐oxo‐chlorins prepared from modifying chlorophyll‐a with malononitrile or cyanoacetic acid. Alternatively, methyl 13¹‐cyanomethylene‐pyropheophorbides were produced by Wittig reactions of 13¹‐oxo‐chlorins with Ph₃P=CHCN. Self‐aggregation of zinc complexes of the semi‐synthetic chlorophyll derivatives possessing a hydroxy or methoxy group at the 3¹‐position was examined in 1%(v/v) tetrahydrofuran or dichloromethane and hexane by electronic absorption and circular dichroism spectroscopy. Although intermolecular hydrogen‐bonding between the 3¹‐hydroxy and 13¹‐oxo groups of bacteriochlorophylls‐c/d/e/f was essential for their self‐aggregation in natural light‐harvesting antenna systems (=chlorosomes), zinc 3¹‐hydroxy‐13¹‐di/monocyanomethylene‐chlorins self‐aggregated in the less/lesser polar organic solvents to form chlorosome‐like large oligomers in spite of lacking the 13¹‐oxo moiety as the hydrogen‐bonding acceptor. Zinc 3¹‐methoxy‐13¹‐dicyanomethylene‐chlorin gave similar self‐aggregates regardless of lack of both the 3¹‐hydroxy and 13¹‐oxo groups. The present self‐aggregation was ascribable to stronger coordination of the 3¹‐oxygen atom to the central zinc than the conventional systems, where the electron‐withdrawing cyano group(s) increased the coordinative ability of the central zinc through the chlorin π‐system.     

Voltammetric Determination of Uric Acid at a Fullerene‐C60‐Modified Glassy Carbon Electrode

Glassy carbon electrode modified by microcrystals of fullerene‐C₆₀ mediates the voltammetric determination of uric acid (UA) in the presence of ascorbic acid (AA). Interference of AA was overcome owing to the ability of pretreated fullerene‐C₆₀‐modified glassy carbon electrode. Based on its strong catalytic function towards the oxidation of UA and AA, the overlapping voltammetric response of uric acid and ascorbic acid is resolved into two well‐defined voltammetric peaks with lowered oxidation potential and enhanced oxidation currents under conditions of both linear sweep voltammetry (LSV) and Osteryoung square‐wave voltammetry (OSWV). At pH 7.2, a linear calibration graph is obtained for UA in linear sweep voltammetry over the range from 0.5 μM to 700 μM with a correlation coefficient of 0.9904 and a sensitivity of 0.0215 μA μM^?1 . The detection limit (3σ) is 0.2 μM for standard solution. AA in less than four fold excess does not interfere. The sensitivity and detection limit in OSWV were found as 0.0255 μA μM^?1 and 0.12 μM, for standard solution respectively. The presence of physiologically common interferents (i.e. adenine, hypoxanthine and xanthine) negligibly affects the response of UA. The fullerene‐C₆₀‐modified electrode exhibited a stable, selective and sensitive response to uric acid in the presence of interferents.     

Adsorptive Square‐Wave Voltammetry for the Analysis and Speciation of Complexes of Cd(II)‐Ferron

The theory of adsorptive stripping square‐wave voltammetry (SWV) for relatively low ligand concentrations is employed to determine the reduction mechanism of Cd(II)‐ferron complexes accumulated on a static mercury drop electrode at different pH values. The electrochemical behavior of ferron molecules indicated that the adsorptive concentration of Cd(II) is possible in solutions with 3.5<pH<11, providing a wide pH range where the interference of other ligands present in real samples would be not so critical. Cyclic voltammetry experiments were also performed for the purpose of comparison. Fitting between experimental and theoretical square‐wave voltammograms shows that the prevailing species at the reaction layer coincide with the equilibrium bulk distribution. The simulation procedure indicated that the electrochemical rate constants of Cd(II)‐ferron complexes varied from (6±1) s^?1 to (0.17±0.01) s^?1 for solutions analyzed at pH 3.9 and 10.8, respectively. Changes at the surface concentrations are discussed considering the ligand to complex ratios at the electrode surface and at the solution bulk. From this analysis it is possible to infer that the oxidized metal species are produced in the electrolytic solution instead of on the electrode surface.     

Effect of 3‐O‐Galloyl Substitution on the Electrochemical Oxidation of Quercetin and Silybin Galloyl Esters at Glassy Carbon Electrode

The galloyl substitution effect on the antioxidant potential of quercetin‐3‐O‐gallate (QG) and silybin‐3‐O‐gallate (SBG), and the oxidation of QG and SBG were studied by cyclic, differential and square‐wave voltammetry using a glassy carbon electrode, and compared with their structural components, quercetin (Q), silybin (SB), gallic acid and gallic acid methyl ester. Their multi‐step pH‐dependent anodic behaviour, first oxidation followed by oxidation of the hydroxyl groups at ring A, is similar to Q and SB. The galloyl substitution significantly improved the antioxidant potential of SB compared to Q, and brought useful knowledge about the antioxidant activity of Q and SB monogalloyl esters.     

Electrochemical Behavior of Some Thiotriazoles in Aqueous‐Alcoholic Media at GCE

An electrochemical study related to the electrooxidation of 4‐amino‐3‐thio‐5‐methyl‐1,2,4‐triazole (I), 4‐amino‐3‐thio‐5‐phenyl‐1,2,4‐triazole (II) and 3‐thio‐5‐phenyl‐1,2,4‐triazole (III), in 10% v/v methanol‐acetate buffer pH 4.6 has been performed. A variety of electrochemical techniques such as differential pulse voltammetry, cyclic voltammetry, double‐potential step chronoamperometry, rotating‐disk electrode voltammetry and coulometry, were employed to clarify that the mechanism of the electrode process follows the oxidation of thiol compounds. All the compounds exhibit similar redox behavior under the given conditions. They display one irreversible oxidation peak, which is diffusion controlled. From the plot of current function in cyclic voltammetry and the ratio of i_c/i_a less than one in double‐potential step chronoamperometry, it was established that these compounds undergo an one electron oxidation followed by a dimerization process involving the formation of disulfide derivative (EC mechanism). The pK_a values were obtained by the dependence of limiting current and potential with in the wide pH interval. The transfer coefficients, the diffusion coefficients and rate constant of coupled chemical reaction were also reported. The substituent effects were also investigated.     

METABOLICALLY CONVERTIBLE LIPOPHILIC DERIVATIVES OF pH-SENSITIVE AMPHIPATHIC PHOTOSENSITIZERS

Abstract We propose the use of acetoxymethyl esters of pH-sensitive amphipathic photosensitizers (PS) for photodynamic therapy (PDT). These compounds may be applicable for PDT involving endocytosis of lipophilic carriers leading to lysosomal uptakc of the esterified PS by target cells. Partial and/or total enzymatic de-esterification may result in the extralysosomal distribution of the photoactive agents, possibly culminating in a multisite photochemical response. We report here the synthesis and properties of chlorin e₆ triacetoxymethyl ester (CAME) and pheophorbide a acetoxymethyl ester (PAME). Chlorin e₆ and pheophorbide a are photocytotoxic chlorins that possess free carboxylate groups and exhibit optimum wavelengths of excitation substantially red shifted relative to hematoporphyrin derivative. Acetoxymethyl esterification of chlorin e₆ and pheophorbide a was accomplished with bromomethyl acetate. High-performance liquid chromatography allowed for the purification of PAME, in 87% purity, and CAME, in 63% yield and 94% purity, as well as the detection of the presumed mono- and diesters of chlorin e₆ as transient intermediates in the synthesis of CAME. The ultraviolet-visible absorption, fluorescence excitation and emission, NMR and mass spectra of the chlorin e₆ tnester are consistent with those expected for CAME. The pH-sensitive amphipathicity of pheophorbide a and chlorin e₆ but not CAME was demonstrated using a water/1-octanol partition assay. The production of pheophorbide a from PAME and the sequential formation of the di- and monoesters and free chlorin e₆ from CAME, by the action of lysosomal esterases obtained from cancer cells, demonstrate the potential of cellular enzymes to convert the lipophilic esters to pH-sensitive amphipathic PS. It is expected that the product of the esterases' action in the acidic lysosome will be hydrophobic and tend to diffuse into the organelle membrane. Contact with the neutral pH of the adjacent cytosol will result in conversion of the PS to a more hydrophilic anionic species, presumably allowing for it lo diffuse into that compartment and partition throughout the lipophilic and aqueous compartments of the cell.     

Photoinduced Charge Transfer in a Conformational Switching Chlorin Dimer–Azafulleroid in Polar and Nonpolar Media

In the present study, a biomimetic reaction center model, that is, a molecular triad consisting of a chlorin dimer and an azafulleroid, is synthesized and its photophysical properties are studied in comparison with the corresponding molecular dyad, which consists only of a chlorin monomer and an azafulleroid. As evidenced by ¹H NMR, UV/Vis, and fluorescence spectroscopy, the chlorin dimer–azafulleroid folds in nonpolar media into a C₂‐symmetric geometry through hydrogen bonding, resulting in appreciable electronic interactions between the chlorins, whereas in polar media the two chlorins diverge from contact. Femtosecond transient absorption spectroscopy studies reveal longer charge‐separated states for the chlorin dimer–azafulleroid; ≈1.6 ns in toluene, compared with the lifetime of ≈0.9 ns for the corresponding chlorin monomer–azafulleroid in toluene. In polar media, for example, benzonitrile, similar charge‐separated states are observed, but the lifetimes are inevitably shorter: 65 and 73 ps for the dimeric and monomeric chlorin–azafulleroids, respectively. Nanosecond transient absorption and singlet oxygen phosphorescence studies corroborate that in toluene, the charge‐separated state decays indirectly via the triplet excited state to the ground state, whereas in benzonitrile, direct recombination to the ground state is observed. Complementary DFT studies suggest two energy‐minima conformations, that is, a folded chlorin dimer–azafulleroid, which is present in nonpolar media, and another conformation in polar media, in which the two hydrophobic chlorins wrap the azafulleroid. Inspection of the frontier molecular orbitals shows that in the folded conformation, the HOMO on each chlorin is equivalent and is shared owing to partial π–π overlap, resulting in delocalization of the conjugated π electrons, whereas the wrapped conformation lacks this stabilization. As such, the longer charge‐separated lifetime for the dimer is rationalized by both the electron donor–acceptor separation distance and the stabilization of the radical cation through delocalization. The chlorin folding seems to change the photophysical properties in a manner similar to that observed in the chlorophyll dimer in natural photosynthetic reaction centers.     

Nanomolar Determination of Methyldopa in the Presence of Large Amounts of Hydrochlorothiazide Using a Carbon Paste Electrode Modified with Graphene Oxide Nanosheets and 3‐(4′‐Amino‐3′‐hydroxy‐biphenyl‐4‐yl)‐acrylic Acid

A novel electrochemical sensor for sensitive detection of methyldopa at physiological pH was developed by the bulk modification of carbon paste electrode (CPE) with graphene oxide nanosheets and 3‐(4′‐amino‐3′‐hydroxy‐biphenyl‐4‐yl)‐acrylic acid (3,′AA). Applying square wave voltammetry (SWV), in phosphate buffer solution (PBS) of pH 7.0, the oxidation current increased linearly with two concentration intervals of methyldopa, one is 1.0×10^?8–1.0×10^?6 M and the other is 1.0×10^?6–4.5×10^?5 M. The detection limit (3σ) obtained by SWV was 9.0 nM. The modified electrode was successfully applied for simultaneous determination of methyldopa and hydrochlorothiazide. Finally, the proposed method was applied to the determination of methyldopa and hydrochlorothiazide in some real samples.     

Electrochemical Determination of Vitamin D3 in Pharmaceutical Products by Using Boron Doped Diamond Electrode

A sensitive square‐wave voltammetry method was developed to determine cholecalciferol (vitamin D₃) in pharmaceutical products at boron‐doped diamond electrode as a working electrode. Vitamin D₃ provided a well‐defined voltammetric peak at around +1.00 V (vs. Ag/AgCl, 3.5 mol dm^?3) in 0.02 mol dm^?3 Britton‐Robinson buffer pH 5.0 prepared in 50 % ethanol. The influence of various factors such as type and pH of the supporting electrolyte, scan rate and square‐wave parameters were studied and optimized. Under optimum conditions, the oxidation peak current increased linearly with the concentration of vitamin D₃ over the range of 2 to 200 μmol dm^?3. The calculated limit of detection and limit of quantitation were 0.17 μmol dm^?3 and 0.51 μmol dm^?3, respectively. The boron‐doped diamond electrode exhibited specific recognition capability for cholecalciferol amongst possible interferences, and the determination of vitamin D₃ was possible in samples such as commercial pharmaceutical products without complicated sample pretreatments.     

Electrochemical Oxidation Mechanism of Ethidium Bromide at a Glassy Carbon Electrode

The electrochemical behavior of ethidium bromide (EtBr) on a glassy carbon electrode (GCE) was studied by cyclic, square wave and differential pulse voltammetry over a wide pH interval. The results revealed that the oxidation mechanism of EtBr is an irreversible and adsorption‐controlled electrode process that occurs in two consecutives steps. The first step is pH‐dependent and occurs at the amino group in the C8 position with the formation of ortho‐ and para‐quinone derivatives, while the second step is pH‐independent and occurs at the amino group in the C3 position. A square wave method for quantitative determination of EtBr is also proposed.