An improved method for simultaneous analysis of aminothiols in human plasma by high-performance liquid chromatography with fluorescence detection

Altered levels of aminothiols in biological fluids are thought to be an important risk indicator for several diseases, and reliable methods for the accurate determination of aminothiols concentrations in plasma are thus required. In this paper ammonium 5-bromo-7-fluorobenzo-2-oxa-1,3-diazole-4-sulphonate (SBD-BF) is proposed as a convenient fluorogenic derivatizating reagent for the determination of aminothiols (cysteine, cysteinylglycine, homocysteine and glutathione) by HPLC with fluorescence detection. The reactions of SBD-BF with aminothiols at room temperature are about three-times faster than those of ammonium 7-fluorobenzo-2-oxa-1,3-diazole-4-sulphonate (the most frequently employed reagent) at 60 °C. The derivatives of SBD-BF with cysteine, cysteinylglycine, homocysteine and glutathione are easily separated by HPLC and their calibration curves show excellent linearity over the range 0.05–20 μmol/L with excellent r² values for all analytes. SBD-BF reacts with thiols under mild conditions, i.e. at 25 °C over about 30 min, and is proposed as a suitable fluorogenic reagent for thiol derivatization to be introduced in analytical clinical chemistry. The detection limits of Cys, Cys-Gly, Hcy and GSH at a signal-to-noise ratio of 5 were 0.1 μM for Cys, 0.01 μM for Cys-Gly and Hcy, and 0.02 μM for GSH. Furthermore, validation parameters of the proposed method are quite satisfactory. As an application of this method the determination of thiol derivatives in human plasma was carried out on a number of samples.     

Simultaneous determination of total homocysteine,cysteine, glutathione,and N‐acetylcysteine in brain homogenates by HPLC

We have developed a simple, fast, accurate, and cheap method for the simultaneous determination of total cysteine, homocysteine, glutathione, and N‐acetylcysteine in brain homogenates based on the reduction of disulfide bonds by tris(2‐carboxyethyl) phosphine, pre‐column derivatization of free thiol groups with 2‐chloro‐1‐methylquinolinium tetrafluoroborate followed by ion‐pair reversed‐phase high‐performance liquid chromatography separation with ultraviolet detection. The separation of thiol derivatives was achieved in 10 min. Linearity was observed in the range of 10–300, 0.7–10, 2–30, and 3–20 μmol/L homogenate with a limit of detection of 3.7, 0.2, 0.8, and 1.2 μmol/L homogenate for cysteine, homocysteine, glutathione, and N‐acetylcysteine, respectively. The precision, calculated as relative standard deviation, was in the range of 1.21–4.77, 1.53–14.35, 0.47–1.92, and 1.61–8.95% for cysteine, homocysteine, glutathione, and N‐acetylcysteine, respectively. The presented method was successfully applied to the selective determination of total amino thiols in pig brain tissue samples.     

Miniaturized capillary electrophoresis system with a carbon nanotube microelectrode for rapid separation and detection of thiols

Multi-walled carbon nanotube (CNT) was mixed with epoxy to fabricate microdisc electrode used as a detector for a specially designed miniaturized capillary electrophoresis (CE)-amperometric detection system for the separation and detection of several bioactive thiols. The end-channel CNT amperometric detector offers favourable signal-to-noise characteristics at a relatively low potential (0.8 V) for detecting thiol compounds. Factors influencing the separation and detection processes were examined and optimized. Four thiols (homocysteine, cysteine, glutathione, and N-acetylcysteine) have been separated within 130 s at a separation voltage of 2000 V using a 20 mM phosphate running buffer (pH 7.8). Highly linear response is obtained for homocysteine, cysteine, glutathione, and N-acetylcysteine over the range of 5-50 μM with detection limits of 0.75, 0.8, 2.9, and 3.3 μM, respectively. Good stability and reproducibility (R.S.D. < 5%) are obtained reflecting the minimal adsorption of thiols at the CNT electrode surface. The new microchip protocol should find a wide range of bioanalytical applications involving assays of thiol compounds.     

HPLC‐fluorescence determination of thiol compounds in the serum of human male and female subjects using HILIC‐mode column

High‐performance liquid chromatography–fluorescence detection using a hydrophilic interaction chromatography‐mode column (ZIC®‐HILIC) was used to determine four kinds of thiol compounds in human serum. Sera were obtained from 34 subjects for this study (17 male subjects aged 22–38 years and 17 female subjects aged 18–38 years). Serum cysteine, cysteinylglycine, glutathione, and γ‐glutamylcysteine, derivatized with ammonium 7‐fluoro‐2,1,3‐benzoxadiazole‐4‐sulfonate, were separated on the ZIC®‐HILIC column and quantified. The serum concentrations of cysteine, cysteinylglycine, glutathione and γ‐glutamylcysteine were 226 ± 4.7, 23.4 ± 1.3, 3.7 ± 0.2 and 3.2 ± 0.1 μm , respectively. In addition, the concentrations of serum thiol compounds from male subjects were significantly higher than those of the female subjects (p < 0.05). Copyright © 2014 John Wiley & Sons, Ltd.     

Development of a potential method based on microchip electrophoresis with fluorescence detection for the sensitive determination of intracellular thiols in RAW264.7 cells

This paper, for the first time, reported the development of a simple, rapid, and reliable method for the separation and sensitive determination of four thiol compounds including homocysteine, cysteine, glutathione, and N‐acetylcysteine based on glass MCE with fluorescence detection using a highly reactive fluorogenic probe, 1,3,5,7‐tetramethyl‐8‐phenyl‐(2‐maleimide)‐difluoroboradiaza‐s‐indacene (TMPAB‐o‐M), as the labeling reagent. TMPAB‐o‐M reacted selectively with thiols to produce highly fluorescent derivatives and the highest derivatization efficiency was achieved within 6 min in physiological conditions. After the optimization of separation conditions, a baseline separation of the four thiol compounds was achieved with the detection limits ranging from 2 nM for glutathione to 4 nM for cysteine (S/N = 3) and RSDs (n = 5) in the range of 3.2–3.8%. The proposed method was significantly sensitive compared to those using electrochemical or even LIF detection in MCE‐based setup reported previously, and applied to the determination of intracellular thiols in macrophage RAW264.7 cells.     

Direct spectrofluorimetric determination of glutathione in biological samples using 5-maleimidyl-2-(m-methylphenyl) benzoxazole

A new thiol fluorescence probe, 5-maleimidyl-2-(m-methylphenyl)benzoxazole (MMPB) has been developed for the direct determination of reduced glutathione (GSH) in real samples. Compared to the reported N-substituted maleimide type of thiol reagents, the main advantage of MMPB is its rather high selectivity for GSH to cysteine (Cys), which often coexists with GSH in biological samples. Under mild conditions similar to the physiological environment, MMPB reacted with GSH to give a highly fluorescent derivative with the excitation and emission wavelengths of 299.2 and 355.8 nm, respectively. In the presence of 0.40-fold (molar ratio) of Cys, a linear relationship was found in the range of 0-1.62×10⁻⁷ mol l⁻¹ with the detection limit (3σ) of 3.23×10⁻¹⁰ mol l⁻¹ for GSH determination. Many other amino acids (100-fold) did not interfere with the determination. Since the molar ratio of Cys to GSH in mammalian tissues and blood does not exceed the value of 0.40:1, the proposed method has been used in the direct determination of GSH in these kinds of biological samples, such as human blood, pig’s liver and heart with the recoveries of 94.3-104.5%     

Spectrofluorimetric determination of thiols by use of N-[P-(2-benzoxazolyl)- phenyl]maleimide

The weak fluorescence of N-[P-2-benzoxazolyl)phenyl]maleimide (BOPM) can be greatly enhanced by thiol-containing compounds. A sensitive and simple spectrofluorimetric method based on the use of BOPM has been developed for the determination of thiols such as cysteine (Cys) and reduced glutathione (GSH). Calibration plots were linear in the concentration range from 0 to 1.6 × 10^–7 mol L^–1 for Cys and 0 to 1.7 × 10^–7 mol L^–1 for GSH. The detection limits (3σ) were 2.36 × 10^–10 mol L^–1 for Cys and 1.49 × 10^–10 mol L^–1 for GSH. Many other amino acids (present at 100-fold greater concentrations) did not interfere with the determination. The proposed method has been used for the determination of Cys in protein hydrolysate and cystine electrolyte or GSH in serum, with recoveries of 95.4–103.7%.     

A selective colorimetric chemosensor for thiols based on intramolecular charge transfer mechanism

Compound 1 as an electron donor-acceptor compound with N,N-dimethylaniline and quinone units was designed for a highly selective colorimetric determination of thiol-containing amino acids and peptides, by making use of the unique reactivity of thiol towards quinone. Compound 1 shows a strong intramolecular charge transfer (ICT) band around 582 nm; but, it decreased after addition of either cysteine (Cys) or glutathione (GSH). Moreover, the ICT band intensity at 582 nm decreased linearly with the increasing concentrations of Cys or GSH. The interference from other amino acids can be neglected. Therefore, compound 1 can be employed as a selective colorimetric visual chemosensor for thiol-containing amino acids and peptides.     

Modified cupric reducing antioxidant capacity (CUPRAC) assay for measuring the antioxidant capacities of thiol-containing proteins in admixture with polyphenols

Proteins are not considered as true antioxidants but are known to protect antioxidants from oxidation in various antioxidant activity assays. This study aims to investigate the contribution of proteins, especially thiol-containing proteins, to the observed overall antioxidant capacity measured by known methods. To determine the antioxidant properties of thiol-containing proteins, the CUPRAC method of antioxidant assay using the oxidizing reagent Cu(II)-neocuproine previously used for simultaneous analysis of cystine and cysteine was adopted. While the CUPRAC method is capable of determining all antioxidant compounds including thiols in complex sample matrices, the Ellman method of thiol quantitation basically does not respond to other antioxidants. The antioxidant quantities in the selected samples were assayed with the ABTS and FRAP methods as well as with the CUPRAC method. In all applied methods, the dilutions were made with a standard pH 8 buffer used in the Ellman method by substituting the Na₂EDTA component of the buffer with sodium citrate. On the other hand, the standard CUPRAC protocol was modified by substituting the pH 7 ammonium acetate buffer (at 1 M concentration) with 8 M urea buffer adjusted to pH 7 by neutralizing with 6 M HCl. Urea helps to partly solubilize and denaturate proteins so that their buried thiols be oxidized more easily. All methods used in the estimation of antioxidant properties of proteins (i.e., CUPRAC, Ellman, ABTS, and FRAP) were first standardized with a simple thiol compound, cysteine, by constructing the calibration curves. The molar absorptivities of these methods for cysteine were: ?_CUPRAC = 7.71 × 10³, ?_Ellman = 1.37 × 10⁴, ?_ABTS = 2.06 × 10⁴, and ?_FRAP = 2.98 × 10³ L mol⁻¹cm⁻¹. Then these methods were applied to various samples containing thiols, such as glutathione (reduced form:GSH), egg white, whey proteins, and gelatin. Additionally, known quantities of selected antioxidants were added to these samples to show the additivity of responses.     

Kinetic determination of organosulphur ligands by inhibition: Trace determination of cysteine and maleonitriledithiolate (MNDT)

Some organosulphur ligands have been found to inhibit the mercury(II) catalyzed substitution of cyanide in hexacyanoferrate(II) by N-methylpyrazinium ion (Mpz⁺). The inhibitory effect is due to the binding tendency of catalyst Hg²⁺ with these inhibitors. This effect has been used as a basis to develop a kinetic method for the determination of trace amounts of two organosulphur ligands viz. cysteine and MNDT. The reaction was followed spectrophotometrically at 655 nm by measuring the decrease in absorbance of the product [Fe(CN)₅Mpz]²⁻. The influence of the reaction variables has also been studied. A general mechanistic scheme of the indicator reaction system including the role of inhibitor has been proposed and applied to determine the organosulphur ligands. Under the selected experimental conditions cysteine and MNDT have been determined in the range of 2–20 × 10^− 7 M and 5 × 10^− 8 M to 12 × 10^− 7 M respectively in various aqueous samples. The analytical concentration range depends upon the amount of Hg²⁺ present in the indicator reaction and also on the stability of the Hg²⁺-inhibitor complex in question. Under specified conditions, the detection limit for cysteine and MNDT are 2 × 10^− 7 M and 5 × 10^− 8 M respectively. The influences of possible interference by major amino acids, on the determination of cysteine and their limits have been investigated.     

Selective spectrofluorimetric determination of glutathione in clinical and biological samples using 1,3,5,7-tetramethyl-8-phenyl-(2-maleimide)-difluoroboradiaza-s-indacene

This work reports the development of a selective, sensitive and rapid spectrofluorimetric method for the determination of reduced glutathione (GSH) in the presence of relatively high levels of cysteine (Cys) in clinical and biological samples using 1,3,5,7-tetramethyl-8-phenyl-(2-maleimide)-difluoroboradiaza-s-indacene (TMPAB-o-M). The fluorescence from TMPAB-o-M is strongly quenched by its maleimide moiety, but after reaction with thiol, the fluorescence is restored with a 350-fold intensity increase (fluorescence quantum yield from 0.002 to 0.73). In H₃Cit-Na₂HPO₄ buffer (pH 7.40), the derivatization is completed in just 5 min under 37 °C. The linear range is 0.005-0.2 μmol L⁻¹, with detection limit of 1.1 × 10⁻¹⁰ mol L⁻¹ (signal-to-noise ratio = 3). Almost all amino acids, including Cys, impose no interference even if present at relatively high concentrations (amino acids:GSH = 100:1, Cys:GSH = 1:1, molar ratio, C_GSH = 3 × 10⁻⁷ mol L⁻¹). The sample can be used directly without further treatment after the protein is removed. The developed method is precise with a relative standard deviation (R.S.D.) lower than 5.0% (n = 6) and has been applied to the determination of GSH in human blood and pig’s liver with recoveries between 94.4 and 105.6%.     

Profiling thiol metabolites and quantification of cellular glutathione using FT-ICR-MS spectrometry

We describe preparation and use of the quaternary ammonium-based α-iodoacetamide QDE and its isotopologue *QDE as reagents for chemoselective derivatization of cellular thiols. Direct addition of the reagents to live cells followed by adduct extraction into n-butanol and analysis by FT-ICR-MS provided a registry of matched isotope peaks from which molecular formulae of thiol metabolites were derived. Acidification to pH 4 during cell lysis and adduct formation further improves the chemoselectivity for thiol derivatization. Examination of A549 human lung adenocarcinoma cells using this approach revealed cysteine, cysteinylglycine, glutathione, and homocysteine as principal thiol metabolites as well as the sulfinic acid hypotaurine. The method is also readily applied to quantify the thiol metabolites, as demonstrated here by the quantification of both glutathione and glutathione disulfide in A549 cells at concentrations of 34.4?±?11.5 and 10.1?±?4.0 nmol/mg protein, respectively.

Spectrophotometric determination of cysteine andN-acetylcysteine in pharmaceutical preparations

An accurate fast spectrophotometric method for the determination of cysteine andN-acetyl-cysteine is presented, based on the oxidation of these amino acids by ferric ions in the presence of ferrozine, whereby a violet-coloured complex is formed which absorbs at 562 nm. The method was satisfactory for the determination of cysteine andN-acetylcysteine in samples within the range 0.02–6.00 gml^–1. Effects of time, acidity, ferric ions, ferrozine, sodium perchlorate concentrations and the tolerance limit for other amino acids have been reported. The method was applied to the determination of cysteine in amino acids mixtures andN-acetylcysteine in pharmaceutical preparations.     

Direct chemiluminescence determination of cysteine in human serum using quinine-Ce(IV) system

A simple, sensitive and selective chemiluminescence (CL) method was developed for the determination of cysteine. This method is based on that the weak CL of cysteine oxidized with cerium (IV) can be greatly enhanced by quinine. The calibration curve was linear over the range 3.5×10⁻⁹-3.5×10⁻⁶ M with a detection limit of 2.5×10⁻⁹ M (S/N=3). The RSD was found to be 8.4% by 10 replicate determinations of 2.9×10⁻⁸ M cysteine. Due to high sensitivity, the proposed method can be used directly to determine the total concentration of cysteine in human serum through simply diluting the sample for a thousand fold. The obtained result was in agreement with that given by amino acid autoanalyzer. The present method does not require any separation, showing a simpler analytical characteristic. The mechanism of the CL reaction was also discussed.     

In Vivo Monitoring of the Thiols in Rat Striatum by Liquid Chromatography with Amperometric Detection at a Functionalized Multi‐Wall Carbon Nanotubes Modified Electrode

A new chemically modified electrode (CME) was fabricated, which was based on the immobilization of multi‐wall carbon nanotubes fuctionalized with carboxylic group (MWNT‐COOH). The results indicated that the CME exhibited efficiently electrocatalytic oxidation for L ‐cysteine and glutathione with relatively high sensitivity, stability and long‐life. Coupled with HPLC, the MWNT‐COOH CME was utilized for amperometric detection of the thiols. The peak currents of L ‐cysteine and glutathione were linear to their concentrations ranging from 3.0×10^?7 to 1.0×10^?3 mol/L with the calculated detection limit (S/N=3) of 1.2×10^?7, 2.2×10^?7 mol/L, respectively. The method had been successfully applied to assess the contents of L ‐cysteine and glutathione in rat striatal microdialysates.     

Electrochemical Determination of Glutathione

Procedures were developed for determining glutathione by voltammetry and coulometric titration with electrogenerated oxidants using the biamperometric indication of the titration end-point. Possible mechanisms of the glutathione reaction with electrogenerated halogens are discussed. Microgram amounts of glutathione can be determined in model solutions with an RSD of 1–2%. The oxidation wave of glutathione in the voltammogram is observed at 0.95 V. At higher glutathione concentrations, the wave takes the shape of a peak. Glutathione concentration in the range between 9.15 × 10^–5 and 2.14 × 10^–3 M is a linear function of its oxidation wave height at a stationary platinum electrode in a 0.05 M H₂SO₄ solution. The determination limit for glutathione is 1.9 × 10^–5 M. The procedures for determining glutathione in human blood were proposed.     

The Copper(II)‐Catalyzed Oxidation of Glutathione

The kinetics and mechanisms of the copper(II)‐catalyzed GSH (glutathione) oxidation are examined in the light of its biological importance and in the use of blood and/or saliva samples for GSH monitoring. The rates of the free thiol consumption were measured spectrophotometrically by reaction with DTNB (5,5′‐dithiobis‐(2‐nitrobenzoic acid)), showing that GSH is not auto‐oxidized by oxygen in the absence of a catalyst. In the presence of Cu²⁺, reactions with two timescales were observed. The first step (short timescale) involves the fast formation of a copper–glutathione complex by the cysteine thiol. The second step (longer timescale) is the overall oxidation of GSH to GSSG (glutathione disulfide) catalyzed by copper(II). When the initial concentrations of GSH are at least threefold in excess of Cu²⁺, the rate law is deduced to be ?d[thiol]/dt=k[copper–glutathione complex][O₂]^0.5[H₂O₂]^?0.5. The 0.5^th reaction order with respect to O₂ reveals a pre‐equilibrium prior to the rate‐determining step of the GSSG formation. In contrast to [Cu²⁺] and [O₂], the rate of the reactions decreases with increasing concentrations of GSH. This inverse relationship is proposed to be a result of the competing formation of an inactive form of the copper–glutathione complex (binding to glutamic and/or glycine moieties).     

Spectrophotometric Study of Bridging N-Donor Ligand-Induced Supramolecular Assembly of Conjugated Zn-Trisporphyrin with a Triphenylamine Core

This article studies the supramolecular assembly behavior of a Zn-trisporphyrin conjugate containing a triphenylamine core (1) with bridging N-donor ligands using the UV-vis spectrophotometric titration method at micromolar concentrations. Our results show that pyridine, a non-bridging ligand, formed a 3:1 open complex with 1. The corresponding binding constant was estimated to be (2.7 ± 0.15) × 10¹⁴ M⁻³. In contrast, bridging ligands, 4,4-bipyridine (BIPY) and 1,3-di(4-pyridyl)propane (DPYP), formed stable 3:2 double-decker complexes with 1 in solution, which collapsed to yield a 3:1 open complex when excess BIPY or DPYP was added. The binding constants for forming BIPY and DPYP double-decker complexes were estimated to be (9.26 ± 0.07) × 10²⁷ M⁻⁴ and (3.62 ± 0.16) × 10²⁷ M⁻⁴, respectively. The UV-vis titration profiles supported the conclusion that the degradation of the 3:2 double-decker 1∙BIPY complex is less favorable compared to that of 1∙DPYP. Consequently, the formation of the 3:1 1∙DPYP open complex proceeded more readily than that of 1∙BIPY.     

Simultaneous determination of glutathione and cysteine concentrations and 2H enrichments in microvolumes of neonatal blood using gas chromatography–mass spectrometry

A method is described whereby the concentrations and ²H isotope enrichment of glutathione (GSH) and cysteine can be simultaneously determined in a single gas chromatography–mass spectrometry run following derivatization as their N,S-ethoxycarbonyl methyl esters. Improvements of the derivatization protocol and the use of a short gas chromatography column combined with single-ion monitoring allow for rapid quantification of these parameters with acceptable precision and reproducibility (coefficient of variation less than 5%). The method makes possible their quantitative measurement in very small volumes (50 μL) of human umbilical cord blood, and is thus suitable for determining the cysteine and GSH concentrations and ²H isotope enrichments in blood samples from neonates or in other conditions in which sample size is restricted. It is shown that the fractional synthesis rate of human umbilical erythrocyte lysates in vitro is several-fold greater than that measured in vivo.     

3-Iodoacetylaminobenzanthrone as a fluorescent derivatizing reagent for thiols in high-performance liquid chromatography

A new thiol-reactive derivatizing reagent, 3-iodoacetylaminobenzanthrone (IAB) has been developed for thiol analysis in liquid chromatography. In aqueous methanol containing 15 mM pH 8.3 H₃BO₃-KCl-Na₂CO₃ buffer, IAB reacted with thiols at 35 °C for 15 min. The derivatives of IAB with glutathione (GSH), cysteine (Cys), homocysteine (Hcy) and N-acetylcysteine (Nac) were well separated on a C₁₈ column with the mobile phase of methanol-water (50:50, v/v) containing 15 mM pH 2.7 H₃cit-Na₂HPO₄ buffer. At λ_ex/λ_em=420/540 nm, the detection limits were 20, 20, 55 and 40 fmol (1, 1, 2.3 and 2 nM), respectively, with a signal-to-noise ratio of 3. Owing to the preferential selectivity of iodoacetamidyl moiety to SH group, amino acids, aliphatic amines, phenol and alcohols had no obvious interference with the determination. The proposed method has been applied to the determination of thiols in human blood with recoveries of 98.5-105.3%.