Dewetting of polystyrene thin films on poly(ethylene glycol)-modified surfaces as a simple approach for patterning proteins

A simple technique for patterning proteins utilizing dewetted polystyrene (PS) droplets is demonstrated. A polystyrene thin film was spin coated on a poly(ethylene glycol) (PEG) silane-modified surface. As the PS film dewets from the surface, upon annealing, to form droplets, the PEG-silane-modified surface is exposed, which retains its capability to resist protein adsorption, and the PS droplets allow the selective adsorption of proteins. In contrast to the undewetted flat PS film, the droplet surface had a greater amount of adsorbed proteins. Atomic force microscopy scans reveal that the roughness of the droplet surface is higher, and a multilayer of proteins results on the droplet surface. Moreover, micro- and nanoscale droplet patterns can easily be achieved by tuning the thickness of PS thin films. Because dewetting approaches for generating ordered dewetting droplets have been successfully generated by others, those approaches could be easily combined with this technique to fabricate ordered protein patterns.     

聚苯乙烯/蒙脱土纳米复合材料的自组装行为

聚合物／层状硅酸盐（PLS）纳米复合材料由于具有常规复合材料所没有的结构、形态以有较常规聚合物基复合材料更优异的物理力学性能等而引起人们的关注^[1],但以往文献^[1-3]主要报道PLS纳米复合材料的制备与性能表征,对于熔融加工过程中粘土粒子吸高分子的取向和结构研究很少。作者等^[4-6]发现了剥离型聚苯乙烯（PS）／蒙脱土纳米复合材料中的剪切诱导有序结构,并采用广角X射线衍射法（WAXD）、透射电镜法（TEM）和红外二向色性法对其形成机理进行了研究。结果表明,该有序结构的主要来源是分散在PS基体中的蒙脱土初级粒子（Primary particles）内部片层的规整排列以及沿平行于样品表面方面的平面取向,PS的苯环平面平行剪切流动方向取向,而烷项链未见明显取向。本文报道该纳米复合材料的剪切诱导有序结构在升温过程中出现的自组装行为,并用原位升温X射线衍射法和红外二向色性法对蒙脱土初级粒子的规整度以及PS的苯环和烷基链在升温过程中的取向行为进行了研究,在此基础上提出了可能的形成机理。     

A novel approach to the micropatterning of proteins using dewetting of polymer bilayers

The ability to control protein and cell positioning on a microscopic scale is crucial in many biomedical and bioengineering applications, such as tissue engineering and the development of biosensors. We propose here a novel, simple, and versatile method for the micropatterning of proteins. Micropatterned substrates are produced by the dewetting of a metastable polymer film on top of another polymer film. Selective adsorption, or micropatterning, of proteins can be achieved on such substrates by choosing pairs of polymers which differ in protein affinity. In this study, patterns were produced in bilayers of poly(methylmethacrylate) (PMMA) and polystyrene (PS), and of PMMA and octadecyltrichlorosilane (OTS). Fluorescence microscopy and atomic force microscopy (AFM) provide evidence that model proteins adsorb preferentially on isolated bio-adhesive (PS and OTS) micropatches in a protein-resistant (PMMA) matrix. "Inverse" protein patterns, containing non-adhesive (PMMA) islands in a protein-adhesive (PS) matrix can also be produced. Such micropatterned substrates could potentially be used in the development of biosensors and bioassays, and in the study of cell growth and motility.     

Photochemically grafted polystyrene layer assisting selective au electrodeposition

We describe the selective electrodeposition of submicrometer gold (Au) patterns achieved by a thin film resist layer of polystyrene (PS) that was exposed to ultraviolet (UV) light on a photoreactive monolayer of a benzophenone-containing alkylthiol formed on a Au-plated substrate and patterned by thermal nanoimprint lithography. The presence of a PS graft layer caused by the benzophenone monolayer photochemistry at an interface between the PS resist layer and photoreactive monolayer played the important role of suppressing the unfavorable growth of tiny Au grains in regions masked with the PS resist layer, resulting in the selective Au electrodeposition in aperture regions of PS resist patterns. The suppressive effect on selective Au electrodeposition depended on the molecular weight of PS used as a resist material. Among unimodal PSs having weight-average molecular weights (M(w)'s) of 2100, 10?900, and 106?000 g mol(-1), the PS of M(w) = 10?900 g mol(-1) functioned most effectively as the resist layer. Au electrodeposition at a low current density allowed the preparation of Au lines having widths of submicrometers and a uniform height independent of line widths in resist aperture regions. Submicrometer bump structures of Au lines could be fabricated on transparent silica substrates by the subsequent wet etching of a Au electrode layer and then a chromium adhesive layer.     

Three-dimensionally ordered macroporous silicon films made by electrodeposition from an ionic liquid

Three dimensionally ordered macroporous (3DOM) silicon films have been made via ordered polystyrene (PS) templates by electrodeposition from an ionic liquid (IL). For this purpose, the ionic liquid 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)amide ([Py(1,4)]Tf(2)N) with SiCl(4) dissolved in it was used as an electrolyte and the electrodeposition of macroporous silicon could be achieved at room temperature (~20 °C). Self-assembled PS colloidal crystals with different diameters were used as templates. Scanning electron microscopy and X-ray photoelectron spectroscopy confirm the quality of the samples, and the optical transmission measurement demonstrates that the 3DOM silicon film has a bandgap in the near infrared regime. Such a material has the potential to make 3DOM silicon feasible for electrical and optical applications.     

Development of Nanodomain and Fractal Morphologies in Solvent Annealed Block Copolymer Thin Films

We have systematically studied the thin film morphologies of asymmetric polystyrene‐block‐poly(ethylene oxide) (PS‐b‐PEO) diblock copolymer subjected to solvent vapors of varying selectivity for the constituent blocks. Upon a short treatment in neutral or PS‐selective vapor, the film exhibited a highly ordered array of hexagonally packed, cylindrical microdomains. In the case of PEO selective vapor annealing, such ordered cylindrical microdomains were not obtained. Instead, fractal patterns on the microscale were observed and their growth processes investigated. Furthermore, hierarchical structures could be obtained if the fractal pattern was exposed to neutral or PS selective vapor.

     

Practical approach for macroporous structure embedded microfluidic system and the catalytic microchemical application

We present a low cost and practical approach to integrate 3D ordered macroporous polyfluoropolyether (PFPE) patterns into a microchannel by a series of porous pattern fabrication processes and subsequent photolithography in a site- and shape-selective manner. The 3D ordered macroporous patterns with high-resolution edges were firstly fabricated by microtransfer molding (μ-TM) of the sacrificial polystyrene (PS) template infiltrated with PFPE as a non-adhesive and solvent-resistant skeletal material. The resulting robust PFPE porous structures with high solvent resistance on a silicon wafer can easily be embedded into the microchannel with the aid of conventional photolithography, leading to a microfluidic system with a built-in microstructure. Moreover, catalytic Pd nanoparticles implanted on the surface of the porous structure were obtained by use of Pd nanoparticle deposited PS spheres, the porous structure embedded channel was utilized to perform a Suzuki coupling reaction.     

漂浮法制备SiO2有序大孔材料

用漂浮组装方法以亚微米尺度单分散的聚苯乙烯(PS)微球作为模板, 在悬浮液气-液界面处组装PS模板微球与纳米级胶体颗粒, 形成二元胶体颗粒共混物, 再去除模板得到有序大孔材料.     

Site-selective chemical etching of silicon using patterned silver catalyst

Si convex arrays and Si hole arrays with ordered periodicities were fabricated by the site-selective chemical etching of a Si substrate using patterned Ag nanoparticles as a catalyst. Ag particles were deposited selectively on the Si substrate by a combination of colloidal crystal templating, hydrophobic treatment and subsequent electroless plating. The obtained Ag patterns were of two different types: network-like honeycomb and isolated-island microarrays. The transfer of ordered patterns fabricated by Ag plating onto the Si substrate could be achieved by the selective chemical etching of a Ag-coated Si area using Ag particles as the etching catalyst. On the basis of this process, it is possible to fabricate negative and positive patterns by changing the arrangement of deposited Ag patterns.     

基于静态呼吸图技术的图案化方法

对呼吸图技术制备二维有序多孔结构的研究进展进行了综合评述, 并重点介绍了本课题组发展的静态呼吸图技术. 利用静态呼吸图法, 可制备高度有序的聚合物、聚合物/无机物微孔膜. 这些有序的结构可以直接应用于光掩膜. 进一步, 多孔聚合物膜可以被紫外光交联和改性. 表面改性的多孔聚合物膜可以用于细胞支架. 而交联的聚合物/无机物前驱体微孔膜可以用来制备无机纳米材料阵列. 结果表明, 静态呼吸图技术是一种简单、高效的对聚合物、聚合物/无机物薄膜进行图案化的通用方法,并展示了图案化薄膜广阔的功能化前景.     

悬浮液气-液界面二元胶体颗粒的漂浮组装机理

提出一种在悬浮液气-液界面漂浮组装亚微米单分散聚苯乙烯(PS)微球和纳米SiO2颗粒二元胶粒晶体的新方法, 并系统研究了漂浮组装机理. 研究表明, 聚苯乙烯微球和二氧化硅两种胶体颗粒在悬浮液气-液界面的漂浮组装是以PS微球的组装为主导的. 在一定PS微球相浓度范围内, 悬浮液中PS 微球与SiO2颗粒的初始体积配比基本不影响PS微球有序组装的形成. PS微球粒径在150-500 nm时易于形成有序排列, 较小或较大粒径的PS微球难以形成有序排列. SiO2颗粒的组装是一种以PS微球为“基底”的沉积过程. 二元胶粒晶体中SiO2颗粒的体积分数由其在混合悬浮液中的相浓度所决定.     

Inverse‐Opal Conducting Polymer Monoliths in Microfluidic Channels

Inverse opal monolithic flow‐through structures of conducting polymer (CP) were achieved in microfluidic channels for lab‐on‐a‐chip (LOC) applications. In order to achieve the uniformly porous monolith, polystyrene (PS) colloidal crystal (CC) templates were fabricated in microfluidic channels. Consequently, an inverse opal polyaniline (PANI) structure was achieved on‐chip, through a two‐step process involving the electrochemical growth of PANI and subsequent removal of the template. In this work the effect of CP electropolymerisation time on these structures is discussed. It was found that growth time is critical in achieving an ordered structure with well‐defined flow‐through pores. This is significant as these optimised porous structures will allow for maximising the surface area of the monolith and will also result in well‐defined flow profiles through the microchannel.     

聚苯乙烯/蒙脱土纳米复合材料中的剪切诱导有序结构(Ⅱ) --红外二向色性研究

用红外二向色性法测定高聚物不同红外谱带二向色性是研究高分子取向的有效方法[1]. 前文[2]中我们报道了广角X射线衍射法和透射电镜法对剥离型聚苯乙烯(PS)/蒙脱土纳米复合材料中的剪切诱导有序结构的研究结果. 研究表明, 该有序结构的主要来源是分散在PS基体中的蒙脱土初级粒子沿平行于样品表面方向的平面取向及其内部片层结构的进一步有序化. 本文用红外二向色性法研究了该纳米复合材料中PS的苯环和烷基链的取向行为, 并在此基础上提出了可能的形成机理.     

Transferable ordered ni hollow sphere arrays induced by electrodeposition on colloidal monolayer

We report an electrochemical synthesis of two-dimensionally ordered porous Ni arrays based on polystyrene sphere (PS) colloidal monolayer. The morphology can be controlled from bowl-like to hollow sphere-like structure by changing deposition time under a constant current. Importantly, such ordered Ni arrays on a conducting substrate can be transferred integrally to any other desired substrates, especially onto an insulting substrate or curved surface. The magnetic measurements of the two-dimensional hollow sphere array show the coercivity values of 104 Oe for the applied field parallel to the film, and 87 Oe for the applied field perpendicular to the film, which is larger than those of bulk Ni and hollow Ni submicrometer-sized spheres. The formation of hollow sphere arrays is attributed to preferential nucleation on the interstitial sites between PS in the colloidal monolayer and substrate, and growth along PSs' surface. The transferability of the arrays originates from partial contact between the Ni hollow spheres and substrate. Such novel Ni ordered nanostructured arrays with transferability and high magnetic properties should be useful in applications such as data storage, catalysis, and magnetics.     

Ordered CdSe nanoparticles within self-assembled block copolymer domains on surfaces

Hierarchical, high-density, ordered patterns were fabricated on Si substrates by self-assembly of CdSe nanoparticles within approximately 20-nm-thick diblock copolymer films in a controlled manner. Surface-modified CdSe nanoparticles formed well-defined structures within microphase-separated polystyrene-b-poly(2-vinylpyridine) (PS-b-P2VP) domains. Trioctylphosphine oxide (TOPO)-coated CdSe nanoparticles were incorporated into PS domains and polyethylene glycol-coated CdSe nanoparticles were located primarily in the P2VP domains. Nearly close-packed CdSe nanoparticles were clearly identified within the highly ordered patterns on Si substrates by scanning electron microscopy (SEM). Contact angle measurements together with SEM results indicate that TOPO-CdSe nanoparticles were partially placed at the air/copolymer interface.     

SYNTHESIS AND PROPERTIES OF POLYSTYRENE／LAPONITE NANOCOMPOSITES

Exfoliated polystyrene (PS)/laponite nanocomposites were prepared successfully. The characteristic doo1 diffraction peak of organo-laponite disappeared in the XRD patterns of nanocomposites, indicating that the laponite layers were exfoliated and the ordered crystal structure of laponite was destroyed because of the styrene polymerization. TEM observations showed that the exfoliated laponite primary particles were dispersed randomly in the PS matrix with lateral dimensions from 1 nm to 10 rim. SEM results showed that the PS/laponite nanocomposite particles were almost monodispersed spheres with the size of about 120 rim. Because of the interaction between PS and laponite nanolayers, the nanocomposites exhibited higher thermal stability and glass transition temperature when compared to pure PS.     

Hierarchically structured porous cadmium selenide polycrystals using polystyrene bilayer templates

In this study, a novel approach is demonstrated to fabricate hierarchically structured cadmium selenide (CdSe) layers with size-tunable nano/microporous morphologies achieved using polystyrene (PS) bilayered templates (top layer: colloidal template) via potentiostatic electrochemical deposition. The PS bilayer template is made in two steps. First, various PS patterns (stripes, ellipsoids, and circles) are prepared as the bottom layers through imprint lithography. In a second step, a top template is deposited that consists of a self-assembled layer of colloidal 2D packed PS particles. Electrochemical growth of CdSe crystals in the voids and selective removal of the PS bilayered templates give rise to hierarchically patterned 2D hexagonal porous CdSe structures. This simple and facile technique provides various unconventional porous CdSe films, arising from the effect of the PS bottom templates.     

Effect of polar groups of polystyrenes on the self-assembly of breath figure arrays

The breath figure (BF) process has been widely used to prepare patterned porous films. The mechanism remains to be further elucidated, especially how polymer architectures affect the stability of water droplets and the pore structure. Polystyrenes (PS) was functionalized with a series of polar groups both in chain middle and chain end, which was synthesized by using difunctional atom transfer radical polymerization (ATRP) initiators with the combination of nucleophilic substitution of the end bromine. It is found that PS with polar groups, which help to reduce interfacial tension, tends to form regular patterns at low concentration and to generate multilayered pores. The coalescence resistance measurement was performed to characterize the stabilization of water droplets from polymers by precipitation. The results show opposite trend with the results of the BF process, indicating a minor role played by polymer precipitation on microdroplets stabilization. We reveal that addition of only an oxyethyl group in the chain middle of PS contributes to the formation of ordered patterns. This study helps to shed light on the impact of polymer architectures on the self-assembly behavior in the BF process.     

THE MORPHOLOGY AND STRUCTURE OF ETHYLCYANOETHYL CELLULOSE IN STYRENE AND POLYSTYRENE

Ethyl-cyanoethyl cellulose ((E-CE)C)/styrene solution could form anisotropic system when the concentration was high enough. The (E-CE)C/polystyrene(PS)multiphase polymer could be obtained by radical polymerization of the styrene in the solution. The (E-CE)C/PS multiphase polymer maintained both the crystalline structure of the (E-CE)C and the amorphous structure of the PS. In the multiphase polymer produced from the isotropic solution, however, the (E-CE)C formed spherulites and spread in the PS amorphous phase. While, in the multiphase polymer produced from the anisotropic solution, the (E-CE)formed cylinderic crystalline aggregates. Moreover, the ordered lamellar texture was also observed in the multiphase polymer produced from the anisotropic solution.     

Dewetting of thin polystyrene films under confinement

The dewetting behavior of thin polystyrene (PS) film has been investigated by placing an upper plate with a ca. 140 nm gap from the underlying substrate with the spin-coated thin polymer films. Three different kinds of dewetting behaviors of thin PS film have been observed after annealing according to the relative position of the PS film to the upper plate. Since the upper plate is smaller than the underlying substrate, a part of the polymer film is not covered by the plate. In this region (I), thin PS film dewetting occurs in a conventional manner, as previously reported. While in the region covered by the upper plate (III), the PS film exhibits unusual dewetted patterns. Meanwhile, in the area right under the edge of the plate (II) (i.e., the area between region I and region III), highly ordered arrays of PS droplets are formed. Formation mechanisms of different dewetted patterns are discussed in detail. This study may offer an effective way to improve the understanding of various dewetting behaviors and facilitate the ongoing exploration of utilizing dewetting as a patterning technique.