Combination of liquid-phase microextraction and on-column stacking for trace analysis of amino alcohols by capillary electrophoresis

We described a new method for the enrichment of basic drugs present in water samples via liquid-phase microextraction (LPME) combined with on-column stacking in capillary electrophoresis. Two steps were employed to enhance the detection sensitivity of four amino alcohols. The analytes were first extracted from aqueous sample (donor solution) that were adjusted to basic through a thin layer of 1-octanol entrapped within the pores of a polypropylene hollow fiber, and then into a 5-microl acidic acceptor solution inside the hollow fiber. The extract was then further enriched through on-column stacking in capillary electrophoresis. With this two-step enrichment procedure, the method provided 72-110-fold preconcentration of the target amino alcohols. The limits of detection were 0.08-0.5 microg/ml. Relative standard deviation (n=6) ranged between 4.3 and 6.9% for the studied drugs utilizing 2-amino-1-phenylethanol as internal standard. The extraction of amino alcohols in spiked urine samples was evaluated using the developed procedure.     

Quantitative analysis of estrogens in human urine using gas chromatography/negative chemical ionisation mass spectrometry

A sensitive procedure for the determination of estrogens in urine has been developed, using enzymatic hydrolysis and ether extraction followed by capillary gas chromatography with negative chemical ionisation mass spectrometry (GC/NCI-MS) of the pentafluorobenzoyl derivatives. These derivatives were superior for GC/NCI-MS to trifluoroacetyl, heptafluorobutyl, pentadecafluorooctanoyl and perfluorotolyl derivatives, giving characteristic negative molecular ions as the base peak for each of the naturally occurring estrogens estrone, estradiol and estriol, and for the synthetic estrogen ethynylestradiol used in contraceptive pills. The method was also suitable for determination of some metabolites of estrone and estradiol. The specificity and sensitivity of the GC/NCI-MS method simplifies sample preparation. Recovery of spiked samples was in the range 84-101% for the natural estrogens based on additions to increase the concentration by 5 and 1 microg L(-1). The repeatability of the method was 1-8% for all estrogens.     

Simplified method for the determination of organochlorine pesticides in honey.

A method is described for the detection and quantitative determination of organochlorine pesticides in honey. After extraction with hexane, the pesticides were cleaned-up by adsorption chromatography on a Florisil Sep-Pak cartridge and eluted with 15% diethyl ether in hexane. The detection of organochlorine pesticides was performed by capillary gas chromatography with electron-capture detection. The quantification limit obtained for different pesticides ranged from 0.56 to 2.78 micrograms kg-1 and recoveries from fortified honey samples averaged 89.6%.     

Determination of cicletanine enantiomers in plasma by high-performance capillary electrophoresis.

A sensitive and selective high-performance capillary electrophoresis procedure was developed for the determination of S(+) and R(-) enantiomers of cicletanine in human plasma. The procedure consisted in extraction of the drug with diethyl ether and analysis by micellar electrokinetic capillary chromatography in a fused-silica capillary using gamma-cyclodextrins in the run buffers and ultraviolet detection. The method was linear from 10 to 500 ng/ml and the limit of detection was 10 ng/ml for each enantiomer in plasma samples. The within-run precision of the method, expressed as relative standard deviation, was 10.4 and 9.6% at 25 ng/ml for S(+) and R(-) cicletanine, and 4.2 and 4.6% at 500 ng/ml, respectively. This method has been used to follow the time course of the concentrations of the cicletanine enantiomers in human plasma after a single therapeutic dose of cicletanine given by mouth.     

Analysis of linear alkylbenzenesulfonates in water samples by large-volume injection-port derivatization and gas chromatography-mass spectrometry.

This work presents a modified method to analyze linear alkylbenzenesulfonates (LASs) in water samples. The method involves extraction of samples by a graphitized carbon black (GCB) cartridge, and direct derivatization in the GC injection port using a large-volume (10-20 microl) direct sample introduction (DSI) device with tetraalkylammonium (TAA) salts. The analytes were then identified and quantitated by ion-trap GC-MS. The large-volume DSI injection-port derivatization technique provides sensitivity, fast and reproducible results for LAS residues, to quantitation at 0.1 microg/l in 200 ml of water samples. The retention effect of TAA salts in the injection port was not detected. Enhanced selected mass chromatograms of [M-55]+ ions of butylated C10-C13 LASs by electron impact ionization MS allows one to determine LAS residues at trace levels in environmental samples. Recovery of total LASs in spiked variety water samples ranged from 89 to 112% while RSDs ranged from 2 to 13%.     

Enantioselective gas chromatographic analysis of aqueous samples by on-line derivatisation. Application to enzymatic reactions

A new gas chromatography (GC) method is presented for analysing both the conversion and the enantiomeric excess (e.e.) of samples from alcohol dehydrogenase reactions. The chiral compounds studied were a series of saturated, straight chain alcohols, ranging from 2-butanol to 2-heptanol. The alcohols were converted to the corresponding trifluoroacetylated derivatives by injecting trifluoroacetic anhydride onto the column shortly after injection of the aqueous samples in split-injection mode (1:100) onto a Chiraldex G-TA capillary GC column. Injecting seven hundred aqueous enzymatic reaction mixtures according to the above-mentioned procedure revealed no noticeable loss of column performance. Using the new GC method, conventional sample work-up procedures such as extraction and off-line derivatisation are eliminated and throughput of samples is significantly enhanced.     

Micro-determination of total phthalate esters in biological samples by gas-liquid chromatography.

A method was investigated in which all of the phthalate esters in biological samples were determined as phthalic acid by gas-liquid chromatography. The method is based on the separation of phthalate esters from the sample with n-hexane, saponification of the esters with an alkaline ethanolic solution to give phthalic acid, purification of the acid by extraction with diethyl ether and column chromatography using silica gel, and conversion of the acid into bis(2,2,2-trifluoroethyl) phthalate with a 2,2,2-trifluoroethanol solution containing boron trifluoride. The derivative obtained is highly sensitive to an electron-capture detector, giving a sensitivity of 0.1 pg. Biological samples fortified with di(2-ethylhexyl) phthalate at levels of 5-100 ppb were analyzed, with recoveries of 70-100%.     

微蒸馏气相色谱法测定水中低级脂肪醇的研究

考察了微蒸馏气相色谱法测定水样中多种低级脂肪醇的可行性。利用微蒸馏技术将水中的醇分离富集,用程序升温气相色谱法测定。正丙醇、异丙醇、正丁醇、异丁醇、正戊醇、异戊醇的浓缩倍数分别为169．3,137．6,197．4,149．2,142．7,126．0。检出限分别为0．021,0．031,0．032,0．032,0．066,0．065mg／L。样品中所存在组分的平均回收率分别为甲醇82．60％,正丙醇93．25％,正丁醇94．88％;相对标准偏差分别为甲醇7．7％,正丙醇4．7％,正丁醇3．4％。方法适用于水中多种微量低级醇的同时分析。     

High-throughput on-line solid-phase extraction-liquid chromatography-tandem mass spectrometry method for the simultaneous analysis of 14 antidepressants and their metabolites in plasma

A rapid, sensitive and fully automated on-line solid-phase extraction-liquid chromatography-tandem mass spectrometry (SPE-LC-MS/MS) method was developed and validated for the direct analysis of 14 antidepressants and their metabolites in plasma. Integration of the sample extraction and LC separation into a single system permitted direct injection of the plasma without prior sample pre-treatment. The applied gradient ensured the elution of all the examined drugs within 14 min and produced chromatographic peaks of acceptable symmetry. The total process time was 20 min and only 50 microL of plasma was required. Selectivity of the method was achieved by a combination of retention time and two precursor-product ion transitions for the non-deuterated compounds. The use of SPE was demonstrated to be highly effective and led to significant decreases in the interferences present in the matrix. Extraction was found to be both reproducible and efficient with recoveries >99% for all the analytes. The method showed excellent intra-assay and inter-assay precision (relative standard deviation (RSD) and bias <20%) for quality control (QC) samples spiked at a concentration of 40, 200 and 800 microg/L and the r2>0.99 over the range investigated (10-1000 microg/L). Limits of quantification (LOQs) were estimated to be 10 microg/L. Furthermore, the processed samples were demonstrated to be stable for at least 48 h, except for clomipramine and norclomipramine, where a slight negative trend was observed, but did not compromise the quantification. The method was subsequently applied to authentic samples previously screened by a routine HPLC method with diode array detection (DAD).     

Determination of boron in silicon-doped gallium arsenide by electrothermal atomic absorption spectrometry and ultraviolet-visible spectrophotometry

Two methods have been developed for the determination of boron impurities in silicon-doped gallium arsenide (GaAs) for electronics. The first method employs the electrothermal atomic absorption spectrometry (ETAAS), the second, the UV-Vis molecular absorption spectrophotomety. In both cases the GaAs sample is decomposed with aqua regia (1+1). To prevent Ga(III) interference on the ETAAS determination of boron, a double extraction of the chlorogallic acid (HGaCl4) in diethyl ether is performed. To improve the overall ETAAS performance, the graphite tubes were pre-treated with iridium(III) and tungsten(IV). A mixed chemical modifier containing Ni(II), Sr(II) and citric acid was also used. The characteristic mass (m0) is 301 +/- 47 pg and the detection limit (3sB) is 2.4 microg g(-1). The classic UV-Vis spectrophotometric procedure using curcumin was also extended to the determination of boron in GaAs. By masking Ga(III) with EDTA and a preliminary extraction of boron with 2-ethyl-hexane 1,3-diol, performed on a semi-micro scale, a detection limit of 0.6 microg g(-1) was achieved. Both methods were applied to the analysis of two Si-doped GaAs samples which were suspected of being boron-contaminated. Results are compared with those obtained by direct analysis of the decomposed sample solution using the inductively coupled plasma atomic emission spectrometry (ICP-AES).     

Bio-compatible in-tube solid-phase microextraction capillary for the direct extraction and high-performance liquid chromatographic determination of drugs in human serum

A restricted access material (RAM), alkyl-diol-silica (ADS), was used to prepare a highly bio-compatible solid-phase microextraction (SPME) capillary for the automated and direct in-tube extraction of several benzodiazepines from human serum. The bifunctionality of the ADS extraction phase prevented fouling of the capillary by protein adsorption while simultaneously trapping the analytes in the hydrophobic porous interior. This the first report of a restricted access material utilized as an extraction phase for in-tube SPME. The approach simplified the required apparatus in comparison to existing RAM column switching procedures, and more importantly eliminated the excessive use of extraction solvents. The biocompatibility of the ADS material also overcame the existing problems with in-tube SPME that requires an ultrafiltration or other deproteinization step prior to handling biological samples, therefore further minimizing the sample preparation requirements. The calculated oxazepam, temazepam, nordazepam and diazepam detection limits were 26, 29, 22 and 24 ng/ml in serum, respectively. The method was linear over the range of 50-50 000 ng/ml with an average linear coefficient (R2) value of 0.9998. The injection repeatability and intra-assay precision of the method were evaluated with five injections of a 10-microg/ml serum sample (spiked with all compounds), resulting in an average RSD<7%. The ADS extraction column was robust, providing many direct injections of biological fluids for the extraction and subsequent determination of benzodiazepines.     

Determination of sugar alcohols in confectioneries by high-performance liquid chromatography after nitrobenzoylation

A method was developed for the determination of sugar alcohols, meso-erythritol, xylitol, D-glucitol, D-mannitol, maltitol and parachinit by high-performance liquid chromatography (HPLC). The sugar alcohols were converted into strong ultraviolet (UV)-absorbing derivatives with p-nitrobenzoyl chloride. HPLC was performed on a phenyl column, using acetonitrile-water (67:33) as mobile phase and UV detection (260 nm). The calibration curves for all sugar alcohols tested were linear in the 10-250 microg/ml range. The average recoveries of the sugar alcohols from four sugarless confectioneries spiked at 5 and 10% levels of six sugar alcohol standards ranged from 73.2 to 109.0% with relative standard deviations ranging from 0.7 to 9.0%. The detection limit of the developed method was 0.1% for the above sugar alcohols contained in the samples.     

Direct chlorination of alcohols with chlorodimethylsilane catalyzed by a gallium trichloride/tartrate system under neutral conditions

The reaction of secondary alcohols 1 with chlorodimethylsilane (HSiMe(2)Cl) proceeded in the presence of a catalytic amount of GaCl(3)/diethyl tartrate to give the corresponding organic chlorides 3. In the catalytic cycle, the reaction of diethyl tartrate 4a with HSiMe(2)Cl 2 gives the chlorosilyl ether 5 with generation of H(2). Alcohol-exchange between the formed chlorosilyl ether 5 and the substrate alcohol 1 affords alkoxychlorosilane 6, which reacts with catalytic GaCl(3) to give the chlorinated product 3. The moderate Lewis acidity of GaCl(3) facilitates chlorination. Strong Lewis acids did not give product due to excessive affinity for the oxy-functionalities. Although tertiary alcohols were chlorinated by this system even in the absence of diethyl tartrate, certain alcohols that are less likely to give carbocationic species were effectively chlorinated using the GaCl(3)/diethyl tartrate system.     

Determination of nonsteroidal anti-inflammatory drugs in biological fluids by automatic on-line integration of solid-phase extraction and capillary electrophoresis

A new, automatic method for the clean-up, preconcentration, separation, and quantitation of nonsteroidal anti-inflammatory drugs (NSAIDs) in biological samples (human urine and serum) using solid-phase extraction coupled on-line to capillary electrophoresis is proposed. Automatic pretreatment is carried out by using a continuous flow system operating simultaneously with the capillary electrophoresis equipment, to which it is linked via a laboratory-made mechanical arm. This integrated system is controlled by an electronic interface governed via a program developed in GWBasic. Capillary electrophoresis is conducted by using a separation buffer consisting of 20 mM NaHPO4, 20 mM beta-cyclodextrin and 50 mM SDS at pH 9.0, an applied potential of 20 kV and a temperature of 20 degrees C. The analysis time is 10 min and the detection limits were between 0.88 and 1.71 microg mL(-1). Automatic clean-up and preconcentration is accomplished by using a C-18 minicolumn and 75% methanol as eluent. The limit of detection of NSAIDs can be up to 400-fold improved when using sample clean-up. The extraction efficiency for these compounds is between 71.1 and 109.7 microg mL(-1) (RSD 2.0-7.7%) for urine samples and from 77.2 to 107.1 microg mL(-1) (RSD 3.5-7.1%) for serum samples.     

Identification of volatile components in yak butter using SAFE, SDE and HS-SPME-GC/MS

The volatile components of yak butter were isolated by solvent-assisted flavour evaporation (SAFE), simultaneous distillation extraction (SDE; dichloromethane and diethyl ether as solvent, respectively) and headspace solid-phase microextraction (HS-SPME; CAR/PDMS, PDMS/DVB and DVB/CAR/PDMS fibre extraction, respectively) and were analysed by GC/MS. A total of 83 volatile components were identified under six different conditions, including 28 acids, 12 esters, 11 ketones, 10 lactones, 10 alcohols, 4 other compounds, 2 aldehydes, 2 unsaturated aldehydes, 1 furan, 1 sulphur-containing compound, 1 unsaturated alcohol and 1 unsatruated ketone. Among them, 51 were identified by SAFE, 58 by SDE (45 with dichloromethane as solvent and 41 with diethyl ether as solvent) and 40 by HS-SPME (26 with CAR/PDMS; 26 with PDMS/DVB and 32 with DVB/CAR/PDMS). Three pretreatment methods were compared to show that the volatile components obtained using different methods varied greatly, both in terms of categories and in content. Therefore, a multi-pretreatment method should be adopted, together with GC/MS. A total of 25 aroma-active compounds were detected by gas chromatography-olfactometry, among which 20 aroma-active compounds were found by SDE (14 with dichloromethane as solvent and 14 with diethyl ether as solvent) and 17 by SAFE.     

Determination of bisphenol A (BPA) in the presence of phenol by first-derivative fluorescence following micro liquid-liquid extraction (MLLE)

Bisphenol A (BPA) in the presence of phenol is determined using a method based on first-derivative spectrofluorimetry. The proposed method involves a micro liquid–liquid extraction of sodium chloride saturated water samples with diethyl ether followed by direct fluorimetric analysis of extracts. The excitation spectra of both compounds in diethyl ether are recorded between 200 and 290 nm, with the emission wavelength at 306 nm. The first-derivative spectra were calculated, measuring the analytical signal for BPA at 239 nm. The concentration range over which the method was applied was 0.5–10.0 μg·l⁻¹ of BPA with relative standard deviations of 2.9% for a concentration of 4.0 μg·l⁻¹ of BPA. The detection limit was 0.07 μg·l⁻¹. The proposed method was applied satisfactorily to the determination of BPA in synthetic mixtures and water samples from different sources previously spiked with different amounts of these chemicals. Recovery values ranging from 93% to 112% were obtained for water samples.     

Determination of fuel dialkyl ethers and BTEX in water using headspace solid-phase microextraction and gas chromatography-flame ionization detection

A simple procedure for the determination of methyl tert-butyl ether (MTBE), ethyl tert-butyl ether (ETBE), ethyl butyl ether (EBE), tert-amyl methyl ether (TAME), benzene, toluene, ethylbenzene, and xylenes (BTEX) in water using headspace (HS) solid-phase microextraction (HS-SPME) was developed. The analysis was carried out by gas chromatography (GC) equipped with flame ionization detector (FID) and 100% dimethylpolysiloxane fused capillary column. A 2 Plackett-Burman design for screening and a central composite design (CCD) for optimizing the significant variables were applied. Fiber type, extraction temperature, sodium chloride concentration, and headspace volume were the significant variables. A 65 microm poly(dimethylsiloxane)-divinylbenzene (PDMS-DVB) SPME fiber, 10 degrees C, 300 g/l, and 20 ml of headspace (in 40 ml vial) were respectively chosen for the best extraction response. An extraction time of 10 min was enough to extract the ethers and BTEX. The relative standard deviation (R.S.D.) for the procedure varied from 2.6 (benzene) to 8.5% (ethylbenzene). The method detection limits (MDLs) found were from 0.02 (toluene, ethylbenzene, and xylenes) to 1.1 microg/l (MTBE). The optimized method was applied to the analysis of the rivers, marinas and fishing harbors surface waters from Gipuzkoa (North Spain). Three sampling were done in 1 year from June 2002 to June 2003. Toluene was the most detected analyte (in 90% of the samples analyzed), with an average concentration of 0.56 microg/l. MTBE was the only dialkyl ether detected (in 15% of the samples) showing two high levels over 400 microg/l that were related to accidental fuel spill.     

HPLC determination and pharmacokinetics of osthole in rat plasma after oral administration of Fructus Cnidii extract

A simple and sensitive high-performance liquid chromatographic (HPLC) method is developed for the determination of osthole in rat plasma and applied to a pharmacokinetic study in rats after administration of Fructus Cnidii extract. After addition of fluocinonide as an internal standard, plasma samples are extracted with diethyl ether. HPLC analysis of the extracts is performed on a Hypersil ODS2 analytical column, using methanol-0.4% acetic acid (65:35, v/v) as the mobile phase. The UV detector is set at 322 nm. The standard curve is linear over the range 0.0520-5.20 microg/mL (r = 0.9979). The mean extraction recoveries of osthole at three concentrations were 81.0%, 91.2%, and 90.7%, respectively. The intra- and interday precisions have relative standard deviations from 1.9% to 4.9%. The limit of quantitation is 0.0520 microg/mL. The HPLC method developed can easily be applied to the determination and pharmacokinetic study of osthole in rat plasma after the animals are given the Fructus Cnidii extract. The plasma concentration of osthole from six rats showed a Cmax of 0.776 +/- 0.069 microg/mL at Tmax of 1.0 +/- 0.3 h.     

Rapid determination of acrylamide contaminant in conventional fried foods by gas chromatography with electron capture detector

Gas chromatography coupled with electron capture detector (GC-ECD) was successfully developed and applied for the rapid determination of acrylamide in conventional fried foods, such as potato crisps, potato chips, and fried chicken wings. The method included defatting with n-hexane, extraction with aqueous solution of sodium chloride (NaCl), derivatization with potassium bromate (KBrO3) and potassium bromide (KBr), and liquid-liquid extraction with ethyl acetate. The final acrylamide extract was analyzed by GC-ECD for quantification and by GC-MS for confirmation. The chromatographic analysis was performed on the HP-INNOWax capillary column, and good retention and peak response of acrylamide were achieved under the optimal conditions (numbers of theoretical plates N = 83,815). The limit of detection (LOD) was estimated to be 0.1 microg kg(-1) on the basis of ECD technique. Recoveries of acrylamide from conventional samples spiked at levels of 150, 500 and 1000 microg kg(-1) (n = 4 for each level) ranged between 87 and 97% with relative standard deviations (RSD) of less than 4%. Furthermore, the GC-ECD method showed that no clean-up steps of acrylamide derivative would be performed prior to injection and was slightly more sensitive than the MS/MS-based methods. Validation and quantification results demonstrated that this method should be regarded as a new, low-cost, and robust alternative for conventional investigation of acrylamide.