Synergistic Effects of Beta Tri‐Calcium Phosphate and Porcine‐Derived Decellularized Bone Extracellular Matrix in 3D‐Printed Polycaprolactone Scaffold on Bone Regeneration

Bone‐derived extracellular matrix (ECM) is widely used in studies on bone regeneration because of its ability to provide a microenvironment of native bone tissue. However, a hydrogel, which is a main type of ECM application, is limited to use for bone graft substitutes due to relative lack of mechanical properties. The present study aims to fabricate a scaffold for guiding effective bone regeneration. A polycaprolactone (PCL)/beta‐tricalcium phosphate (β‐TCP)/bone decellularized extracellular matrix (dECM) scaffold capable of providing physical and physiological environment are fabricated using 3D printing technology and decoration method. PCL/β‐TCP/bone dECM scaffolds exhibit excellent cell seeding efficiency, proliferation, and early and late osteogenic differentiation capacity in vitro. In addition, outstanding results of bone regeneration are observed in PCL/β‐TCP/bone dECM scaffold group in the rabbit calvarial defect model in vivo. These results indicate that PCL/β‐TCP/bone dECM scaffolds have an outstanding potential as bone graft substitutes for effective bone regeneration.     

Non‐Invasive and In Situ Characterization of the Degradation of Biomaterial Scaffolds by Volumetric Photoacoustic Microscopy

Degradation is among the most important properties of biomaterial scaffolds, which are indispensable for regenerative medicine. The currently used method relies on the measurement of mass loss across different samples and cannot track the degradation of an individual scaffold in situ. Here we report, for the first time, the use of multiscale photoacoustic microscopy to non‐invasively monitor the degradation of an individual scaffold. We could observe alterations to the morphology and structure of a scaffold at high spatial resolution and deep penetration, and more significantly, quantify the degradation of an individual scaffold as a function of time, both in vitro and in vivo. In addition, the remodeling of vasculature inside a scaffold can be visualized simultaneously using a dual‐wavelength scanning mode in a label‐free manner. This optoacoustic method can be used to monitor the degradation of individual scaffolds, offering a new approach to non‐invasively analyze and quantify biomaterial–tissue interactions in conjunction with the assessment of in vivo vascular parameters.     

Ile‐Lys‐Val‐ala‐Val (IKVAV) peptide for neuronal tissue engineering

Despite the great advances in microsurgery, some neural injuries cannot be treated surgically. Stem cell therapy is a potential approach for treating neuroinjuries and neurodegenerative disease. Researchers have developed various bioactive scaffolds for tissue engineering, exhibiting enhanced cell viability, attachment, migration, neurite elongation, and neuronal differentiation, with the aim of developing functional tissue grafts that can be incorporated in vivo. Facilitating the appropriate interactions between the cells and extracellular matrix is crucial in scaffold design. Modification of scaffolds with biofunctional motifs such as growth factors, drugs, or peptides can improve this interaction. In this review, we focus on the laminin‐derived Ile‐Lys‐Val‐Ala‐Val peptide as a biofunctional epitope for neuronal tissue engineering. Inclusion of this bioactive peptide within a scaffold is known to enhance cell adhesion as well as neuronal differentiation in both 2‐dimensional and 3‐dimensional environments. The in vivo application of this peptide is also briefly described.     

Design Parameters of Tissue‐Engineering Scaffolds at the Atomic Scale

Stem‐cell behavior is regulated by the material properties of the surrounding extracellular matrix, which has important implications for the design of tissue‐engineering scaffolds. However, our understanding of the material properties of stem‐cell scaffolds is limited to nanoscopic‐to‐macroscopic length scales. Herein, a solid‐state NMR approach is presented that provides atomic‐scale information on complex stem‐cell substrates at near physiological conditions and at natural isotope abundance. Using self‐assembled peptidic scaffolds designed for nervous‐tissue regeneration, we show at atomic scale how scaffold‐assembly degree, mechanics, and homogeneity correlate with favorable stem cell behavior. Integration of solid‐state NMR data with molecular dynamics simulations reveals a highly ordered fibrillar structure as the most favorable stem‐cell scaffold. This could improve the design of tissue‐engineering scaffolds and other self‐assembled biomaterials.     

Synthesis and characterization of a nano‐hydroxyapatite/chitosan/polyethylene glycol nanocomposite for bone tissue engineering

A novel nanocomposite involving nano‐hydroxyapatite/chitosan/polyethylene glycol (n‐HAP/CS/PEG) has been successfully synthesized via co‐precipitation approach at room temperature. The purpose to synthesize such nanocomposite is to search for an ideal analogue which may mimick the composition of natural bone for bone tissue engineering with respect to suitable biocompatibility, cytotoxicity and mechanical properties. The FTIR spectra of n‐HAP/CS and n‐HAP/CS/PEG scaffolds indicated significant intermolecular interaction between the various components of both the nanocomposites. The results of XRD, TEM and TGA/DTA suggested that the crystallinity and thermal stability of the n‐HAP/CS/PEG scaffold have decreased and increased respectively, relative to n‐HAP/CS scaffold. The comparison of SEM images of both the scaffolds indicated that the incorporation of PEG influenced the surface morphology while a better in‐vitro bioactivity has been observed in n‐HAP/CS/PEG than in n‐HAP/CS based on SBF study, referring a greater possibility for making direct bond to living bone if implanted. Furthermore, MTT assay revealed superior non‐toxic nature of n‐HAP/CS/PEG to murine fibroblast L929 cells as compared to n‐HAP/CS. The comparative swelling studies of n‐HAP/CS/PEG and n‐HAP/CS scaffolds revealed a better swelling rate for n‐HAP/CS/PEG. Also n‐HAP/CS/PEG showed higher mechanical strength relative to n‐HAP/CS supportive of bone tissue ingrowths. Copyright © 2014 John Wiley & Sons, Ltd.     

Perfluorophenyl azide functionalization of electrospun poly(para‐dioxanone)

Strategies to surface‐functionalize scaffolds by covalent binding of biologically active compounds are of fundamental interest to control the interactions between scaffolds and biomolecules or cells. Poly(para‐dioxanone) (PPDO) is a clinically established polymer that has shown potential as temporary implant, eg, for the reconstruction of the inferior vena cava, as a nonwoven fiber mesh. However, PPDO lacks suitable chemical groups for covalent functionalization. Furthermore, PPDO is highly sensitive to hydrolysis, reflected by short in vivo half‐life times and degradation during storage. Establishing a method for covalent functionalization without degradation of this hydrolyzable polymer is therefore important to enable the surface tailoring for tissue engineering applications. It was hypothesized that treatment of PPDO with an N‐hydroxysuccinimide ester group bearing perfluorophenyl azide (PFPA) under UV irradiation would allow efficient surface functionalization of the scaffold. X‐ray photoelectron spectroscopy and attenuated total reflectance Fourier‐transformed infrared spectroscopy investigation revealed the successful binding, while a gel permeation chromatography study showed that degradation did not occur under these conditions. Coupling of a rhodamine dye to the N‐hydroxysuccinimide esters on the surface of a PFPA‐functionalized scaffold via its amine linker showed a homogenous staining of the PPDO in laser confocal microscopy. The PFPA method is therefore applicable even to the surface functionalization of hydrolytically labile polymers, and it was demonstrated that PFPA chemistry may serve as a versatile tool for the (bio‐)functionalization of PPDO scaffolds.     

Effect of a scaffold fabricated thermally from acetylated PLGA on the formation of engineered cartilage

A MHDS has been employed to fabricate 3D scaffolds from PLGA with acetyl endgroups to achieve in vivo regeneration of cartilage tissue. The fabricated acetylated-PLGA scaffold showed open pores and interconnected structures. Rabbit chondrocytes were seeded on the PLGA scaffolds and transplanted immediately into subcutaneous sites of athymic mice. Chondrocytes transplantation with untreated PLGA scaffolds served as a control. Histological analysis of the implants at 4 weeks with H&E staining and alcian blue staining revealed higher extracellular matrix and GAG expression at the neocartilage in the PLGA-6Ac scaffolds than that of the PLGA-6OH scaffold group. This endgroup-modified scaffold may be useful for successful cartilage tissue engineering in orthopedic applications.     

Cell(MC3T3‐E1)‐Printed Poly(ϵ‐caprolactone)/Alginate Hybrid Scaffolds for Tissue Regeneration

A new cell‐printed scaffold consisting of poly(ϵ‐caprolactone) (PCL) and cell‐embedded alginate struts is designed. The PCL and alginate struts are stacked in an interdigitated pattern in successive layers to acquire a three‐dimensional (3D) shape. The hybrid scaffold exhibits a two‐phase structure consisting of cell (MC3T3‐E1)‐laden alginate struts able to support biological activity and PCL struts able to provide controllable mechanical support of the cell‐laden alginate struts. The hybrid scaffolds exhibit an impressive increase in tensile modulus and maximum strength compared to pure alginate scaffolds. Laden cells are homogeneously distributed throughout the alginate struts and the entire scaffold, resulting in cell viability of approximately 84%.     

Improved efficacy of bio‐mineralization of human mesenchymal stem cells on modified PLLA nanofibers coated with bioactive materials via enhanced expression of integrin α2β1

Current therapeutic interventions in bone defects are mainly focused on finding the best bioactive materials for inducing bone regeneration via activating the related intracellular signaling pathways. Integrins are trans‐membrane receptors that facilitate cell‐extracellular matrix (ECM) interactions and activate signal transduction. To develop a suitable platform for supporting human bone marrow mesenchymal stem cells (hBM‐MSCs) differentiation into bone tissue, electrospun poly L‐lactide (PLLA) nanofiber scaffolds were coated with nano‐hydroxyapatite (PLLA/nHa group), gelatin nanoparticles (PLLA/Gel group), and nHa/Gel nanoparticles (PLLA/nHa/Gel group) and their impacts on cell proliferation, expression of osteoblastic biomarkers, and bone differentiation were examined and compared. MTT data showed that proliferation of hBM‐MSCs on PLLA/nHa/Gel scaffolds was significantly higher than other groups (P < .05). Alkaline phosphatase activity was also more increased in hBM‐MSCs cultured under osteogenic media on PLLA/nHa/Gel scaffolds compared to others. Gene expression evaluation confirmed up‐regulation of integrin α2β1 as well as the osteogenic genes BGLAP, COL1A1, and RUNX2. Following use of integrin α2β1 blocker antibody, the protein level of integrin α2β1 in cells seeded on PLLA/nHa/Gel scaffolds was decreased compared to control, which confirmed that most of the integrin receptors were bound to gelatin molecules on scaffolds and could activate the integrin α2β1/ERK axis. Collectively, PLLA/nHa/Gel scaffold is a suitable platform for hBM‐MSCs adhesion, proliferation, and osteogenic differentiation in less time via activating integrin α2β1/ERK axis, and thus it might be applicable in bone tissue engineering.     

Incorporation of nanohydroxyapatite and vitamin D3 into electrospun PCL/Gelatin scaffolds: The influence on the physical and chemical properties and cell behavior for bone tissue engineering

Scaffold, an essential element of tissue engineering, should provide proper physical and chemical properties and evolve suitable cell behavior for tissue regeneration. Polycaprolactone/Gelatin (PCL/Gel)‐based nanocomposite scaffolds containing hydroxyapatite nanoparticles (nHA) and vitamin D3 (Vit D3) were fabricated using the electrospinning method. Structural and mechanical properties of the scaffold were determined by scanning electron microscopy (SEM) and tensile measurement. In this study, smooth and bead‐free morphology with a uniform fiber diameter and optimal porosity level with appropriate pore size was observed for PCL/Gel/nHA nanocomposite scaffold. The results indicated that adding nHA to PCL/Gel caused an increase of the mechanical properties of scaffold. In addition, chemical interactions between PCL, gelatin, and nHA molecules were shown with XRD and FT‐IR in the composite scaffolds. MG‐63 cell line has been cultured on the fabricated composite scaffolds; the results of viability and adhesion of cells on the scaffolds have been confirmed using MTT and SEM analysis methods. Here in this study, the culture of the osteoblast cells on the scaffolds showed that the addition of Vit D3 to PCL/Gel/nHA scaffold caused further attachment and proliferation of the cells. Moreover, DAPI staining results showed that the presence and viability of the cells were greater in PCL/Gel/nHA/Vit D3 scaffold than in PCL/Gel/nHA and PCL/Gel scaffolds. The results also approved increasing cell proliferation and alkaline phosphatase (ALP) activity for MG‐63 cells cultured on PCL/Gel/nHA/Vit D3 scaffold. The results indicated superior properties of hydroxyapatite nanoparticles and vitamin D3 incorporated in PCL/Gel scaffold for use in bone tissue engineering.     

Electroactive 3D Scaffolds Based on Silk Fibroin and Water‐Borne Polyaniline for Skeletal Muscle Tissue Engineering

Silk fibroin (SF) with good biocompatibility and degradability has great potential for tissue engineering. However, the SF based scaffolds lack the electroactivity to regulate the myogenic differentiation for the regeneration of muscle tissue, which is sensitive to electrical signal. Herein, a series of electroactive biodegradable scaffolds based on SF and water‐soluble conductive poly(aniline‐co‐N‐(4‐sulfophenyl) aniline) (PASA) via a green method for skeletal muscle tissue engineering are designed. SF/PASA scaffolds are prepared by vortex of aqueous solution of SF and PASA under physiological condition. Murine‐derived L929 fibroblast and C2C12 myoblast cells are used to evaluate cytotoxicity of SF/PASA scaffolds. Moreover, myogenic differentiation of C2C12 cells is investigated by analyzing the morphology of myotubes and related gene expression. These results suggest that electroactive SF/PASA scaffolds with a suitable microenvironment, which can enhance the myogenic differentiation of C2C12 cells, have a great potential for skeletal muscle regeneration.     

Poly(l‐Lactic Acid)/Gelatin Fibrous Scaffold Loaded with Simvastatin/Beta‐Cyclodextrin‐Modified Hydroxyapatite Inclusion Complex for Bone Tissue Regeneration

Recently, the application of nanostructured materials in the field of tissue engineering has garnered attention to mediate treatment and regeneration of bone defects. In this study, poly(l ‐lactic acid) (PLLA)/gelatin (PG) fibrous scaffolds are fabricated and β‐cyclodextrin (βCD) grafted nano‐hydroxyapatite (HAp) is coated onto the fibrous scaffold surface via an interaction between βCD and adamantane. Simvastatin (SIM), which is known to promote osteoblast viability and differentiation, is loaded into the remaining βCD. The specimen morphologies are characterized by scanning electron microscopy. The release profile of SIM from the drug loaded scaffold is also evaluated. In vitro proliferation and osteogenic differentiation of human adipose derived stem cells on SIM/HAp coated PG composite scaffolds is characterized by alkaline phosphatase (ALP) activity, mineralization (Alizarin Red S staining), and real time Polymerase chain reaction (PCR). The scaffolds are then implanted into rabbit calvarial defects and analyzed by microcomputed tomography for bone formation after four and eight weeks. These results demonstrate that SIM loaded PLLA/gelatin/HAp‐(βCD) scaffolds promote significantly higher ALP activity, mineralization, osteogenic gene expression, and bone regeneration than control scaffolds. This suggests the potential application of this material toward bone tissue engineering.

     

Enhancement of biocompatibility on aligned electrospun poly(3‐hydroxybutyrate) scaffold immobilized with laminin towards murine neuroblastoma Neuro2a cell line and rat brain‐derived neural stem cells (mNSCs)

Electrospinning has been extensively used to construct tissue‐engineered scaffolds because of its ability to provide the fibrous scaffold with structurally analogous to the naturally occurring protein in the extracellular matrix of native tissues. In addition, the modification of scaffolds with bioactive molecules is beneficial as this can create an environment that consists of biochemical cues to further promote cell adhesion, proliferation, and differentiation. In the present contribution, we prepared and investigated the potential used of aligned electrospun poly(3‐hydroxybutyrate) (PHB) scaffold immobilized with bioactive molecule to serve as nervous scaffold. Laminin was successfully immobilized on the surface using covalent binding between functional groups of modified scaffolds and protein. The ability to use for neural regeneration was evaluated in vitro towards murine neuroblastoma Neuro2a cell line and mouse brain‐derived neural stem cells. The surface modification with laminin immobilized on the PHB fibrous scaffolds supported the attachment and promoted the proliferation of Neuro2a very wells. Despite the good attachment and proliferation of Neuro2a and mouse brain‐derived neural stem cells were not able to proliferate on the neat PHB, hydrolyzed PHB and laminin immobilized on hydrolyzed PHB fibrous scaffold.     

Fumarate Copolymer–Chitosan Cross‐Linked Scaffold Directed to Osteochondrogenic Tissue Engineering

Natural and synthetic cross‐linked polymers allow the improvement of cytocompatibility and mechanical properties of the individual polymers. In osteochondral lesions of big size it will be required the use of scaffolds to repair the lesion. In this work a borax cross‐linked scaffold based on fumarate‐vinyl acetate copolymer and chitosan directed to osteochondrondral tissue engineering is developed. The cross‐linked scaffolds and physical blends of the polymers are analyzed in based on their morphology, glass transition temperature, and mechanical properties. In addition, the stability, degradation behavior, and the swelling kinetics are studied. The results demonstrate that the borax cross‐linked scaffold exhibits hydrogel behavior with appropriated mechanical properties for bone and cartilage tissue regeneration. Bone marrow progenitor cells and primary chondrocytes are used to demonstrate its osteo‐ and chondrogenic properties, respectively, assessing the osteo‐ and chondroblastic growth and maturation, without evident signs of cytotoxicity as it is evaluated in an in vitro system.

     

Functional PLGA Scaffolds for Chondrogenesis of Bone‐Marrow‐Derived Mesenchymal Stem Cells

Two chondrogenic factors, Dex and TGF‐β1, were incorporated into PLGA scaffolds and their chondrogenic potential was evaluated. The Dex‐loaded PLGA scaffold was grafted with AA and heparin, the heparin‐immobilized one was then reacted with TGF‐β1, yielding a PLGA/Dex‐TGF (PLGA/D/T) scaffold. The scaffolds were seeded with rabbit MSCs and cultured for 4 weeks. The results show that the scaffolds including chondrogenic factors strongly upregulated the expression of cartilage‐specific genes and clearly displayed type‐II collagen immunofluorescence. The functionalized PLGA scaffolds could provide an appropriate niche for chondrogenic differentiation of MSC without a constant medium supply of Dex and TGF‐β1.

     

Modifying the Pores of an Inverse Opal Scaffold With Chitosan Microstructures for Truly Three‐Dimensional Cell Culture

Inverse opal scaffolds have recently emerged as a novel class of scaffolds with uniform and controllable pore sizes for tissue engineering to provide better nutrient transport, a uniform cell distribution, and an adjustable microenvironment for cell differentiation. However, when the pore size of the scaffold is much larger than the dimension of a cell, the cell actually encounters a local 2D environment and the void space associated with the pore can not be efficiently utilized. Here, we demonstrate that a truly 3D microenvironment can be created inside a pore by further functionalizing the as‐prepared inverse opal scaffold with a second polymer by freeze‐drying. The resultant inverse opal scaffold with hierarchically structured pores can enhance both cell proliferation and tissue infiltration.     

Insulin immobilized PCL‐cellulose acetate micro‐nanostructured fibrous scaffolds for tendon tissue engineering

Use of growth factors as biochemical molecules to elicit cellular differentiation is a common strategy in tissue engineering. However, limitations associated with growth factors, such as short half‐life, high effective physiological doses, and high costs, have prompted the search for growth factor alternatives, such as growth factor mimics and other proteins. This work explores the use of insulin protein as a biochemical factor to aid in tendon healing and differentiation of cells on a biomimetic electrospun micro‐nanostructured scaffold. Dose response studies were conducted using human mesenchymal stem cells (MSCs) in basal media supplemented with varied insulin concentrations. A dose of 100‐ng/mL insulin showed increased expression of tendon markers. Synthetic‐natural blends of various ratios of polycaprolactone (PCL) and cellulose acetate (CA) were used to fabricate micro‐nanofibers to balance physicochemical properties of the scaffolds in terms of mechanical strength, hydrophilicity, and insulin delivery. A 75:25 ratio of PCL:CA was found to be optimal in promoting cellular attachment and insulin immobilization. Insulin immobilized fiber matrices also showed increased expression of tendon phenotypic markers by MSCs similar to findings with insulin supplemented media, indicating preservation of insulin bioactivity. Insulin functionalized scaffolds may have potential applications in tendon healing and regeneration.     

Fabrication of poly(lactide‐co‐glycolide) scaffold embedded spatially with hydroxyapatite particles on pore walls for bone tissue engineering

Poly(lactide‐co‐glycolide) (PLGA) scaffolds embedded spatially with hydroxyapatite (HA) particles on the pore walls (PLGA/HA‐S) were fabricated by using HA‐coated paraffin spheres as porogens, which were prepared by Pickering emulsion. For comparisons, PLGA scaffolds loaded with same amount of HA particles (2%) in the matrix (PLGA/HA‐M) and pure PLGA scaffolds were prepared by using pure paraffin spheres as porogens. Although the three types of scaffolds had same pore size (450–600 µm) and similar porosity (90%–93%), the PLGA/HA‐S showed the highest compression modulus. The embedment of the HA particles on the pore walls endow the PLGA/HA‐S scaffold with a stronger ability of protein adsorption and mineralization as well as a larger mechanical strength against compression. In vitro culture of rat bone marrow stem cells revealed that cell morphology and proliferation ability were similar on all the scaffolds. However, the alkaline phosphatase activity was significantly improved for the cells cultured on the PLGA/HA‐S scaffolds. Therefore, the method for fabricating scaffolds with spatially embedded nanoparticles provides a new way to obtain the bioactive scaffolds for tissue engineering. Copyright © 2011 John Wiley & Sons, Ltd.