Effect of the Preparation Methodof Al–Mg–O Catalysts on the Selective Decomposition of Ethanol

Summary.  Selective decomposition of ethanol was used as a test reaction at 350°C to evaluate the catalytic activity of two Al–Mg–O mixed oxides prepared by two different methods (wet impregnation and coprecipitation). The catalyst precursors were examined by TG and DTA and were calcined between 500–900°C for 5 h in air. The surface area of all catalysts was measured by N₂ sorption using the BET method. The total acidity and basicity were determined by TPD using pyridine and formic acid. The catalysts were characterized by XRD analysis. It was found that the preparation method of Al–Mg–O catalyst has a great effect on the selective decomposition of ethanol. Al–Mg–O (I) catalysts, prepared by wet impregnation, were more selective towards ethene formation during dehydration of ethanol. This is ascribed to their high total surface acidity. On the other hand, Al–Mg–O (II) catalysts, prepared by coprecipitation, were highly selective in the oxidative dehydrogenation of ethanol to yield acetaldehyde. This could be attributed to their high concentration of basic sites. In addition, the production of traces of diethyl ether was also observed (three times more for Al–Mg–O (II) than for Al–Mg–O (I)). Corresponding author. E-mail: shalawy99@yahoo.com Received October 12, 2001. Accepted (revised) January 7, 2002     

Synthesis, Characterization, and Thermal Decomposition of Double Rare Earth Monomethylammonium Selenates

Summary.  Double rare earth monomethylammonium selenates of the general formula CH₃NH₃ Ln (SeO₄)₂·5H₂O (Ln = Sm, Eu, Gd, Tb, Ho, Y) were synthesized and characterized using X-ray powder diffraction and infrared spectroscopy. The thermal decomposition of the compounds were investigated using TG, DTG, and DTA techniques. Corresponding author. E-mail: vrajgaonkar@yahoo.com, vrajgaonkar@mail.mu.ac.in Received November 5, 2001. Accepted (revised) March 6, 2002     

Synthesis of electrospun BaSrTiO<Subscript>3</Subscript>/PVP nanofibers

Ba_1−x Sr _x TiO₃(x = 0–0.5, BST) nanofibers with diameters of 150–210 nm were prepared by using electrospun BST/polyvinylpyrrolidone (PVP) composite fibers by calcination for 2 h at temperatures in the range of 650–800 °C in air. The morphology and crystal structure of calcined BST/PVP nanofibers were characterized as functions of calcination temperature and Sr content with an aid of XRD, FT-IR, and TEM. Although several unknown XRD peaks were detected when the fibers were calcined at temperatures less than 750 °C, they disappeared with increasing the temperature (above 750 °C) due to its thermal decomposition and complete reaction in the formation of BST. In addition, the FT-IR studies of BST/PVP fibers revealed that the intensities of the O–H stretching vibration bands (at 3430 and 1425 cm⁻¹) became weaker with increasing the calcination temperature and a broad band at 540 cm⁻¹, Ti–O vibration, appeared sharper and narrower after calcination above 750 °C due to the formation of metal oxide bonds. However, no effect of Sr content on the crystal structure of the composites was detected.     

Two Novel Er-Cr Ion-Pair Complexeswith Hydrogen Bonding Network: Syntheses, Crystal Structures, and Magnetic Properties

Summary.  Two novel Er-Cr ion-pair complexes ([Er(DMA)₃(H₂O)₄][Cr(CN)₆] and [Er(MPL)₄(H₂O)₃][Cr(CN)₆]·2H₂O; DMA = dimethylacetamide, MPL = 1-methyl-2-pyrrolidinone) have been synthesized. [Er(DMA)₃(H₂O)₄][Cr(CN)₆] crystallizes in the monoclinic system (space group P _c ) with a = 9.789(2), b = 11.263(2), c = 13.997(3)?, β = 105.66(3)°, V = 1485.9(5)?³, Z = 2; [Er(MPL)₄(H₂O)₃][Cr(CN)₆]·2H₂O crystallizes in the monoclinic system (space group P2₁) with a = 9.447(2), b = 13.881(3), c = 14.673(3)?, β = 101.85(3), V = 1883.1(7)?³, Z = 2. X-Ray crystal diffraction analyses reveal that the two complexes form a hydrogen bonding network structure through the CN group and H₂O molecules. Variable temperature susceptibilities for the two complexes indicate that weak antiferromagnetic interactions exist between cation and anion pairs through this hydrogen bonding network.     

Characterization and preparation of nanocrystalline MgCuZn ferrite powders synthesized by sol–gel auto-combustion method

Nanocrystalline Mg–Cu–Zn ferrite powders were successfully synthesized through nitrate–citrate gel auto-combustion method. Characterization of the nitrate–citrate gel, as-burnt powder and calcined powders at different calcination conditions were investigated by using XRD, DTA/TG, IR spectra, EDX, VSM, SEM and TEM techniques. IR spectra and DTA/TGA studies revealed that the combustion process is an oxidation–reduction reaction in which the NO₃ ⁻ ion is oxidant and the carboxyl group is reductant. The results of XRD show that the decomposition of the gel indicated a gradual transition from an amorphous material to a crystalline phase. In addition, increasing the calcination temperature resulted in increasing the crystallite size of Mg–Cu–Zn ferrite powders. VSM measurement also indicated that the maximum saturation magnetization (64.1 emu/g) appears for sample calcined at 800 °C while there is not much further increase in M _s at higher calcination temperature. The value of coercivity field (H _c) presents a maximum value of 182.7 Oe at calcination temperature 700 °C. TEM micrograph of the sample calcined at 800 °C showed spherical nanocrystalline ferrite powders with mean size of 36 nm. The toroidal sample sintered at 900 °C for 4 h presents the initial permeability (μ _i) of 405 at 1 MHz and electrical resistivity (ρ) of 1.02 × 10⁸ Ω cm.     

The Thermal Dehydration of Magnesium Aluminum Pentafluoride Dihydrate: Crystal Structures of MgAlF5(H2O)2 and MgAlF5

Summary.  Small plate-like single crystals of MgAlF₅(H₂O)₂ have been obtained during hydrothermal treatment (270°C) of microcrystalline material prepared by precipitation of stoichiometric solutions of Al₂(SO₄)₃ ·  18H₂O and Mg(NO₃)₂ · 6H₂O with diluted hydrofluoric acid. The crystal structure of MgAlF₅(H₂O)₂ has been refined from single crystal data (Imma (# 74), Z = 4, a = 7.0637(7), b = 10.1308(10), c = 6.7745(7) ?, 398 structure factors, 33 parameters, R(F² > σ(F ²)) = 0.0245, wR(F² all) = 0.0525). Main features of the inverse weberite type structure are infinite chains of trans-bridged [AlF₆] octahedra which are connected via common fluorine atoms by isolated [MgF₄(H₂O)₂] octahedra. MgAlF₅(H₂O)₂ dehydrates at temperatures above 300°C to give MgAlF₅. XRPD analysis of this phase has revealed isotypism with FeAlF₅. The crystal structure of MgAlF₅ (Immm (# 71), Z = 2, a = 7.268(1), b = 6.123(2), c = 3.543(1) ?) is built of infinite chains of edge-sharing [MgF₆] octahedra and chains of corner-sharing [AlF₆] octahedra along [001]. Upon further heating to temperatures above 500°C, MgAlF₅ decomposes to MgF₂ and α − AlF₃. Received January 15, 2001. Accepted February 12, 2001     

Chemistry of the Thermal Decomposition of Lutetium Selenities

Summary.  The solubility isotherm of the system Lu₂O₃–SeO₂–H₂O was studied at 100°C. The compounds of the three-component system were identified by Schreinemakers’ method and chemical, derivatograph and X-ray phase analyses after separation in the pure state: Lu₂(SeO₃)₃·4H₂O and LuH(SeO₃)₂·2H₂O. Received February 27, 2002; accepted (revised) April 26, 2002     

Crystal Structures of Na3PO2S2 · 11H2O and Na3POS3 · 11H2O

Summary.  Single crystals of sodium dithiophosphate undecahydrate (Na₃PO₂S₂ · 11H₂O) and sodium trithiophosphate undecahydrate (Na₃POS₃ · 11H₂O) were grown from aqueous solution. The crystal structures of Na₃PO₂S₂ · 11H₂O (P2₁2₁2₁; a = 1248.1(1), b = 945.2(1), c = 1383.1(1) pm; R ₁ = 0.0202, wR ₂ = 0.0502) and Na₃POS₃ · 11H₂O (Pna2₁; a = 1262.0(2), b = 947.6(2), c = 1431.5(2) pm; R ₁ = 0.0720, wR ₂ = 0.1371) are related to each other in a sense that all constituting units are arranged in similar positions and with similar orientations. The geometries of the anions were determined with high accuracy; thus, the structural parameters of the POS³⁻ ₃ anion were measured for the first time. Received September 25, 2001. Accepted January 21, 2002     

Single-step sol-gel deposition and dielectric properties of 0.4 μm thick, (001) oriented Pb(Zr,Ti)O<Subscript>3</Subscript> thin films

Single-step sol–gel deposition was attempted for realizing submicron thick, (001) oriented Pb(Zr_0.53Ti_0.47)O₃ (PZT) thin films, using an alkoxide solution containing polyvinylpyrrolidone (PVP). A solution of molar composition, Pb(NO₃)₂:Zr(OC₃H₇ ⁿ)₄:Ti(OC₃H₇ ⁱ)₄:PVP:H₂O:CH₃COCH₂COCH₃:CH₃OC₂H₄OH:C₃H₇ ⁿOH = 1.1:0.53:0.47:0.5:5:0.5:22:0.98, was prepared as a coating solution. Gel films were prepared on Pt(111)/TiO₂/SiO₂/Si(100) substrates by spin-coating, and calcined at 350 °C and annealed at 650 °C either in an electric furnace or in a near-infrared (IR) furnace. When calcined in the near-IR furnace, the films became (001) oriented on annealing. When calcined in the electric furnace, on the other hand, the films became randomly oriented on annealing. These observations indicate that the heating the gel films from the substrate side in the calcination step at 350 °C induces crystallographic orientation in the annealing step at 650 °C. The effects of the heating methods on the thermal decomposition of the gel films, and the microstructure and dielectric properties of the fired films were studied. Finally 0.4 μm thick, (001) oriented PZT films could be successfully prepared by non-repetitive, single-step deposition. The oriented film thus obtained had the remnant polarization 2P _r of 39 μC/cm² and the dielectric constant ε′ of 960 ± 169.     

Concerning the Chiral Discrimination and Helix Inversion Barrier in Hypericinates and Hypericin Derivatives

Summary.  It was found that the hypericinate salts of (R)-1-phenylethylamine and (S)-1-(1-naphthyl)-ethylamine display a small chiroptical signal of the same sign only at high concentrations in an apolar solvent. No further indications of a chiral discrimination between the helical conformers of hypericinate could be found in these cases. However, upon esterification of the 3-hydroxyl group of hypericin with (1S)-camphanic chloride, the two diastereomers were found in an 1:1 ratio equilibrating rather fast at temperatures above 30°C with one diastereomer in excess. From the temperature dependence of the equilibrium positions (measured by means of CD and ¹H NMR), a ΔG ⁰ value of 5.8±0.5 kJ·mol⁻¹ was derived. Accordingly, the chiral discrimination of the (M)-configured enantiomer of the helix by the (S)-configured auxiliary occurred at an intermediate level. From the temperature dependence of the equilibration kinetics an activation energy of E _a = 70±0.5 kJ·mol⁻¹ was derived, which thus defines the upper limit of the helix inversion of hypericin and hypericinate. This value is by about 10 kJ·mol⁻¹ lower than the recently estimated limit. Corresponding author. E-mail: heinz.falk@jku.at Received March 22, 2002; accepted April 3, 2002     

A morphological study of mullite long fiber prepared using polyvinyl butyral as spinning aids

Morphologies of aluminosilicate gel fiber and mullite long fiber prepared from spinning sol of Al(NO₃)₃·9H₂O, tetraethylorthosilicate and ethanol using polyvinyl butyral as a spinning aids have been studied experimentally. The weight loss of fibers as function of drying time and calcination temperature was summarized and the fiber morphologies at different temperature were also discussed. The results indicated that fiber sample lost the main weight at the first several minutes at 40°C. A main axial crack was observed due to the heat stress if gel fiber was not pre-dried before calcination. Accompanied by weight loss during heat treatment, “black” fibers were shown at the temperature range of 300–500°C and some attachment was observed among fiber surface attributed by the decomposition of organic materials. The actual elimination temperature of organic materials was different from our former heat analysis measurement result, and it could be explained by the pre-treating procedure and high heating rate of heat analysis. The morphological study of mullite fiber calcined at different temperature could help to understand and obtain the mullite fiber with smooth surface.     

An influence of thermal treatment conditions of hydrotalcite-like materials on their catalytic activity in the process of N<Subscript>2</Subscript>O decomposition

Hydrotalcite-like materials containing apart from magnesium and aluminum also copper, cobalt, nickel, and iron were prepared by a co-precipitation method. Thermal transformations of hydrotalcite-like materials were studied by thermal analysis methods as well as XRD, UV–vis–DRS, and XPS measurements of the samples calcined at various temperatures (600, 700, and 800 °C). Calcined hydrotalcites, especially those containing cobalt and copper, were found to be active and selective catalysts of N₂O decomposition. It was shown that an increase in the calcination temperature significantly activated the Co-containing catalysts. Promotion of the samples with potassium resulted in activation of the hydrotalcite-based catalysts.     

The Thermal Dehydration of Magnesium Aluminum Pentafluoride Dihydrate: Crystal Structures of MgAlF5(H2O)2 and MgAlF5

 Small plate-like single crystals of MgAlF₅(H₂O)₂ have been obtained during hydrothermal treatment (270°C) of microcrystalline material prepared by precipitation of stoichiometric solutions of Al₂(SO₄)₃ ·  18H₂O and Mg(NO₃)₂ · 6H₂O with diluted hydrofluoric acid. The crystal structure of MgAlF₅(H₂O)₂ has been refined from single crystal data (Imma (# 74), Z = 4, a = 7.0637(7), b = 10.1308(10), c = 6.7745(7) ?, 398 structure factors, 33 parameters, R(F² > σ(F ²)) = 0.0245, wR(F² all) = 0.0525). Main features of the inverse weberite type structure are infinite chains of trans-bridged [AlF₆] octahedra which are connected via common fluorine atoms by isolated [MgF₄(H₂O)₂] octahedra. MgAlF₅(H₂O)₂ dehydrates at temperatures above 300°C to give MgAlF₅. XRPD analysis of this phase has revealed isotypism with FeAlF₅. The crystal structure of MgAlF₅ (Immm (# 71), Z = 2, a = 7.268(1), b = 6.123(2), c = 3.543(1) ?) is built of infinite chains of edge-sharing [MgF₆] octahedra and chains of corner-sharing [AlF₆] octahedra along [001]. Upon further heating to temperatures above 500°C, MgAlF₅ decomposes to MgF₂ and α − AlF₃.     

Solvothermal Synthesis, Crystal Structure, and Properties of the New Oxothiomolybdate Ni(dien)2[Mo2O2S6]

Summary.  The reaction of NiCl₂ · 6H₂O, Na₂MoO₄ ċ 2H₂O, and sulfur in a mixture of diethylenetriamine and 0.2 M ammonia solution (1:4) under solvothermal conditions leads to the formation of orange-red crystals of the oxothiomolybdate Ni(dien)₂[Mo₂O₂S₆] (dien = diethylenetriamine) in nearly 100% yield. The structure consists of [Ni(dien)₂]²⁺ cations and discrete dimeric [Mo₂O₂S₆]²⁻ anions. The compound crystallizes in the monoclinic space group P2₁/c (a = 8.726(2), b = 18.111(4), c = 14.419(3) ?, β = 101.686(3)°). Upon heating the compound decomposes in a single step starting at about 250°C. The final decomposition product was identified by X-ray powder diffractometry as MoS₂ and Ni₃S₂. Spectroscopic data as well as detailed synthetic procedures for Ni(dien)₂[Mo₂O₂S₆] are reported. Received November 6, 2000. Accepted November 17, 2000     

Microanalysis of Hydrogen, Boron and Fluorine in Vesuvianite by Means of SIMS, EPMA and FTIR

Vesuvianite, a complex sorosilicate, often contains variable (from trace-to-minor-element) amounts of H, B and F. We describe a microanalytical study of H, B and F in vesuvianite by means of Electron Probe Microanalysis (EPMA), Secondary Ion Mass Spectrometry (SIMS), and single-crystal Fourier-Transform InfraRed (FTIR) spectroscopy. Most crystals investigated are B- (up to 3.67 wt% B₂O₃) and F-rich (up to 2.38 wt%); H₂O ranges from 0.243 to 0.665 wt%. The H data obtained by SIMS allowed us to calibrate the quantitative analysis of H₂O by FTIR spectroscopy. The resulting molar absorption coefficient (ɛ _i = 100 000 ± 2000 L · mol⁻¹ · cm⁻²) is in excellent agreement with working curves available from the literature. Moreover, the SIMS data allowed us to obtain the calibration curve to estimate the B₂O₃ content on the basis on the FTIR absorbance: a _i = 34000 ± 1400 · B₂O₃ (wt%).     

Synthesis, Characterization, and Thermal Decomposition of Double Rare Earth Monomethylammonium Selenates

 Double rare earth monomethylammonium selenates of the general formula CH₃NH₃ Ln (SeO₄)₂·5H₂O (Ln = Sm, Eu, Gd, Tb, Ho, Y) were synthesized and characterized using X-ray powder diffraction and infrared spectroscopy. The thermal decomposition of the compounds were investigated using TG, DTG, and DTA techniques.     

Mechanochemical synthesis of nanocrystalline nickel-molybdenum compounds,their morphology and application in catalysis: I. Effect of the Ni: Mo atomic ratio on the structure and properties of nickel-molybdenum compounds prepared under mechanochemical synthesis conditions

Mechanochemical activation in high-energy planetary activators was used for the preparation of highly dispersed nickel-molybdenum compounds. Nickel hydroxocarbonate [NiCO₃ · 2Ni(OH)₂ · nH₂O] and ammonium paramolybdate [(NH₄)₆Mo₇O₂₄ · 4H₂O] were chosen as starting compounds. The effect of the Ni: Mo atomic ratio on the composition and structure of products formed in the process of mechanochemical activation followed by calcination was studied. It was found that, at the Ni: Mo atomic ratios of 1.0 and 1.4, the mechanically activated product after calcination at 520°C contained 70–100% β-NiMoO₄, which is a stable phase at temperatures lower than 180°C.     

Tetrapyrrole bizirconium complexes as active catalysts for ethylene polymerization

Ethylene polymerization was carried out by using a group of new dizirconium(IV) tetrapyrrole complexes as catalysts and MAO as co-catalyst under 1 atmosphere pressure of ethylene gas at 25 and 40°C. The highest value of catalyst activity was obtained at 40°C by using bizirconium complexes including one calix[4]pyrrole between two zirconium centers and two terminal chlorines, while zirconium(IV) complexes with coordinated THF, almost have not catalytic activity. The maximum catalytic activity mounted to 830 kg/mol·bar·h by Zr₂(Cy₄ Pyr ₄)Cl₄. The results show that the structure of the coordination sphere of zirconium(IV) has great influence on the rate of polymerization, molar masses of forming polymer, and its molecular mass distribution. Correspondence: Sajjad Mohebbi, Chemistry Department, University of Kurdistan, P.O. Box 66176-416, Sanandaj, Iran.     

Experimental Determination of the Isotherm at 15°C of the System Mg<Superscript>2+</Superscript>/Cl<Superscript>−</Superscript>, SO<Subscript>4</Subscript><Superscript>2</Superscript>–H<Subscript>2</Subscript>O

Summary.  The diagram of the ternary system Mg²⁺/Cl⁻, SO₄ ²⁻–H₂O was established at 15°C by means of analytical and conductimetric measurements. Three compounds were found in this diagram, which are MgSO₄·6H₂O, MgSO₄·7H₂O, and MgCl₂·6H₂O. The solubility field of MgSO₄·7H₂O is important whereas those of MgSO₄·6H₂O and MgCl₂·6H₂O are small. The compositions (mass-%) of the two invariant points determined by the two methods are: MgSO₄:MgCl₂=2.73:33.80 and MgSO₄: MgCl₂=3.38:28.91. Both the measured and the calculated isotherm at 15°C have been used for modelling of the diagram Mg²⁺/Cl⁻, SO₄ ²⁻–H₂O between 0 and 35°C. The polythermal invariant point was approximately located between 15 and 10°C.  Corresponding author. E-mail: ariguib@planet.tn Received October 16, 2002; accepted (revised) December 3, 2002 Published online April 24, 2003 RID="a" ID="a" Dedicated to Prof. Dr. Heinz Gamsj?ger on the occasion of his 70^th birthday     

Silver containing sol–gel derived silica thin films: effect of aluminum incorporation on optical,microstructural and bactericidal properties

Silver containing silica (Ag–SiO₂) thin films with and without aluminum (Al) were prepared on soda-lime-silica glass by spin coating of aqueous sols. The coating sol was formed through mixing tetraethyl orthosilicate [Si(OC₂H₅)₄]/ethanol solution with aqueous silver nitrate (AgNO₃) and aluminum nitrate nonahydrate [(AlNO₃)₃·9H₂O] solutions. The deposited films were calcined in air at 100, 300 and 500 °C for 2 h and characterized using x-ray diffraction, UV-visible and x-ray photoelectron spectroscopy. The effect of Al incorporation and calcination treatment on microstructure and durability of the films, and chemical/physical state of silver in the silica thin film have been reported. The bactericidal activity of the films was also determined against Staphylococcus aureus via disk diffusion assay studies before and after chemical durability tests. The investigations revealed that the optical, bactericidal properties and chemical durability of Ag–SiO₂ films can be improved by Al addition. The Al-modified Ag–SiO₂ thin films do not exhibit any coloring after calcination in the range of 100–500 °C, illustrating that silver is incorporated within the silica gel network in ionic form (Ag⁺). Al incorporation also improved the overall durability and antibacterial endurance of Ag–SiO₂ thin films.