Advances in coatings on Mg alloys and their anti-microbial activity for implant applications

Magnesium matrix composites reinforced by calcium phosphate could not show the desired effect on the magnesium breakdown rate. Rapid disintegration rate limited the magnesium alloys used as biodegradable implant material. The rate of degradation can be minimized and biological activity can be improved in the magnesium alloy by Hydroxyapatite (HA) coating with the improvement of bone induction and conduction abilities. Various alkali post-treatment and conversion coating methods are applied to deposit HA coatings and biocompatible dicalcium phosphate dihydrate (DCPD) on magnesium alloy so that corrosion resistance and surface biocompatibility can be improved to be used in bone tissue engineering applications. Magnesium's corrosion resistance will weaken its antibacterial properties, which are linked to and proportional to the alkaline pH at the time of breakdown. The goal of this study is to bring together and compare contemporary research on different coatings on magnesium and related alloys in relation to antibacterial functionalized activities. A though review has been performed on in vivo and in vitro cytocompatibility, material property, corrosion resistance, and antibacterial properties of the coatings. Increased degradation behavior, biocompatibility, and bioactivity have been achieved following multiple procedures such as alkali treatment with HA electrochemical deposition on magnesium alloy. Multifunctional coatings can make safe and bioactive magnesium alloy surfaces for biodegradable implant applications.     

Preparation and Characterization for the Electrodeposited Hybrid Coating of Calcium Phosphate/Chitosan on Ti Alloy Surface

Hydroxyapatite (HA) formulated as Ca₁₀(PO₄)₆(OH)₂ becomes a favorable material for implants because of its chemical similarity to the calcium phosphate minerals present in biological hard tissue. Many efforts have been made in recent years in the development of processing methods for depositing hydroxyapatite on implant alloy substrate in order to have high strength, good processability, suitable specific density, excellent corrosion resistance in the physiological environment and good affinity to the living body. The plasma spray technique is commonly used in the HA coating on implants. The major problem for the plasma spray, however, is the decomposition and phase transformation of hydroxyapatite during the spray coating process. Electrochemical techniques including electrophretic deposition and electro-deposition are being developed as an alternative method for producing hydroyapatite coated composite material. It is very desirable at present to further strengthen the coating and bond it to the metal substrate, and to increase the bioactivity of hydroxyapatite coatings as well, which is very important for forming a strong chemical bond with natural bone as an implant material.     

Characterization and cytocompatibility of polydopamine on MAO‐HA coating supported on Mg‐Zn‐Ca alloy

Magnesium has been suggested as a potential biodegradable metal for the usage as orthopaedic implants. However, high degradation rate in physiological environment remains the biggest challenge, impeding wide clinical application of magnesium‐based biomaterials. In order to reduce its degradation rate and improve the biocompatibility, micro‐arc oxidation coating doped with HA particles (MAO‐HA) was applied as the inner coating, and polydopamine (PDA) film was synthesized by dopamine self‐polymerization as the outer coating. The microstructure evolution of the coating was characterized using scanning electron microscopy (SEM), atomic force microscope (AFM), X‐ray diffraction analyses (XRD), Fourier transform infrared spectroscopy (FT‐IR), and X‐ray photoelectron spectroscopy (XPS). The results showed that PDA film had covered the entire surface of MAO‐HA coating and the pore size of MAO‐HA coating decreased. The root mean square (RMS) roughness of PDA/MAO‐HA coatings was approximately 106.46 nm, which was closer to the optimum surface roughness for cellular attachment as compared with MAO‐HA coatings. Contact angle measurement indicated that the surface wettability had been transformed from hydrophobic to hydrophilic due to the introduction of PDA. The PDA/MAO‐HA coatings exhibited better corrosion resistance in vitro, with the self‐corrosion potential increasing by 150 mV and the corrosion current density decreasing from 2.09 × 10^?5 A/cm ² to 1.46 × 10^?6 A/cm ² . In hydrogen evolution tests, the corrosion rates of the samples coated with PDA/MAO‐HA and MAO‐HA were 4.40 and 5.95 mm/y, respectively. MTS assay test and cell‐surface interactions experiment demonstrated that PDA/MAO‐HA coatings exhibited good cellular compatibility and could promote the adhesion and proliferation of MC3T3‐E1 cells.     

Ca-P Conversion Coating on AZ60 Magnesium Alloy for Biomedical Application

To improve the anti-corrosion behaviors of magnesium alloy in the inner environment of human body,a bioactive Ca-P coating was deposited on the AZ60 magnesium alloy by a novel simple method.The morphologies of the Ca-P coatings formed under different treatment time were studied by scanning electron microscopy（SEM）.The corrosion behaviors of Ca-P coating were investigated by electrochemical polarization test and electrochemical impedance spectroscopy in both 3％（mass fraction） NaCl solution and simulated body fluid（SBF）.Immersion test in SBF was performed to evaluate the corrosion rate of Ca-P coated magnesium alloy.X-Ray diffraction（XRD） analysis result shows that the coating mentioned above mainly consists of dicalcium phosphate dehydrate（CaHPO4·2H2O,DCPD） and β-tricalcium phosphate dehydrate[β-TCP,Ca3（PO4）2],which exhibits good corrosion resistance.After magnesium alloy was immersed in 1 mol/L NaOH solution at 80 ℃ for 2 h,hydroxyapatite [Ca10（PO4）6（OH）2,HA]appeared on the magnesium alloy substrate,which can further decrease the corrosion rate of AZ60 magnesium alloy in SBF.     

Characterization and corrosion properties of Ti‐O/HA composite coatings on Mg‐Zn alloy

Biodegradable magnesium alloys have been widely investigated in the field of biomaterials because they can be gradually dissolved and absorbed by the human body without long‐term existence. However, it was found that bare magnesium implants suffered from rapid corrosion. Surface modification is applied to improve the corrosion resistance and biocompatibility of magnesium implants. In this study, Ti‐O/HA composite coatings including typical flakes and nanofibers were fabricated on the Mg‐Zn alloy. The Ti‐O films were deposited on the magnesium alloy by direct current magnetron sputtering, and subsequently coated with HA flakes and nanofibers by electrochemical deposition, respectively. The obtained coatings were investigated by X‐ray diffraction, Fourier Transform Infrared spectroscopy and scanning electron microscopy. The corrosion resistance was evaluated by potentiodynamic polarization and hydrogen evolution tests in simulated body fluid at 37 °C. The results show that the compact Ti‐O films are composed of particles within the size of 100 nm, the outermost HA coatings are predominantly composed of HA and doped with Na⁺, Mg²⁺ ions and functional groups. The stronger diffraction and broader peak in nanofibers than typical flakes around 25.8° are ascribed to the preferential growth in orientation (002). The morphology of HA coatings changed from typical flakes into nanofibers with the addition of NaF, the mechanism to explain the difference is also discussed. The corrosion resistance was improved significantly by the coatings, the corrosion rates in the 10 days were 4.13, 1.77, 0.96 and 0.85 mm/y, respectively. Copyright © 2011 John Wiley & Sons, Ltd.     

Fabrication and In vitro Bioactivity of Robust Hydroxyapatite Coating on Porous Titanium Implant

Compared witli the traditional dental implant, TixOs■ manufactured by direct laser metal forming(DLMF) technology exhibits improved capability for bone osteointegration due to its porous surface structure, and has achieved remarkable clinical effect. However, like the traditional titanium and other alloyed implants, the porous titanium implant TixOsR also has relatively weak bioactivity. To address this issue, a proper surface modification method may be needed. Hydroxyapatite(HA) has been widely used in implant surface coating for its similar chemical composition to bone tissue and its osteoconductive properties. Thus, combining TixOs■ implants with hydroxyapatite can be an efficient way to enhance their bioactivity. We herewith reported a competent pulsed laser deposition(PLD) method of coating nano-sized HA thin film onto the porous TixOs■ implant. The HA coatings were characterized by means of scanning electron microscopy(SEM), energy dispersive X-ray spectroscopy(EDS), X-ray photoelectron spectroscopy(XPS) and focused ion beam(FIB) method, and nanocrystal sized thin HA films were identified on the surface of TixOs■ implants. The low cytotoxicity and improved cell proliferation ability of HA coated implants were further tested and verified using MC 3T3 E1 cells with the consideration of the controlling group. Our results show that a stable and bioactive HA tliin film is able to form on the surtace of the porous titanium implant by PLD method.This may benefit the fiirther clinical application of TixOs■ implants.     

Micro‐arc oxidation and electrophoretic deposition of nano‐grain merwinite (Ca3MgSi2O8) surface coating on magnesium alloy as biodegradable metallic implant

Magnesium alloys are promising biomaterials as biodegradable implant for orthopedic applications. However, their low corrosion resistance and poor bioactivity have prohibited their implant applications. In order to enhance these two properties, a nano‐grain merwinite coating was prepared on magnesium alloy. Its corrosion and the bioactivity behavior were characterized with electrochemical and immersion tests. The results showed that the nano‐grain merwinite coating can improve both the corrosion resistance and the bioactivity of the magnesium alloy making it an appropriate material for biodegradable bone implants. Copyright © 2014 John Wiley & Sons, Ltd.     

Evaluation of in vitro bioactivity and MG63 Oesteoblast cell response for TiO2 coated magnesium alloys

The present investigation reports TiO₂ coating on magnesium alloy AZ31 by sol–gel method via dip coating technique. TiO₂ coated surface was characterized by thin film X-ray diffraction (TF-XRD), Fourier transform infrared red (FT-IR) spectroscopy, scanning electron microscopy (SEM) with energy-dispersive X-ray (EDX) spectroscopy, atomic force microscopy (AFM) and transmission electron microscopy (TEM) techniques. From TF-XRD results, the peaks at 2θ values of 25.14, 32.12, 68.73 and 70.11 confirm the presence of TiO₂. The TiO₂ is crystalline in nature and the crystallite size is about 32.4 nm. SEM-EDX, TEM and AFM show that the coated surface is uniform and nanoporous. FT-IR analysis shows that the peak in the range of 692 cm^?1 is assigned to Ti–O–Ti stretching vibration. Contact angle measurements show that the coating is hydrophilic in nature. Bioactivity of the coating in simulated body fluid (SBF) was also examined, the hydroxyl functionalized surface greatly enhances the hydroxyapatite growth. The potentiodynamic polarization studies prove that the corrosion resistance of the TiO₂ coated surface after immersion in SBF for 7 days is improved dramatically. Cell adhesion studies confirm the increased cell attachment on TiO₂ coated surface when compared to uncoated alloy, due to less amount of Mg ion release from the substrate in the culture medium.     

Surface characteristics and corrosion resistance of sol–gel derived CaO–P2O5–SrO–Na2O bioglass–ceramic coated Mg alloy by different heat-treatment temperatures

To improve the initial corrosion resistance and then make the degradation rate of magnesium alloys to meet the biomedical application, crack-free CaO–P₂O₅–SrO–Na₂O bioglass-ceramic coatings were synthesized on AZ31 magnesium alloy substrates using a sol–gel dip-coating technique followed by a heat-treatment in the temperature range of 400–500 °C. The effects of heat-treatment on the phase constituents, surface characteristics and corrosion resistances of the coatings were investigated. It was shown that the crystallization of Ca₂P₂O₇ occurred after the glass was treated at 400 °C. As the temperature increased from 400 °C to 450 °C, besides main phase Ca₂P₂O₇, β-Ca(PO₃)₂ and Ca₄P₆O₁₉ were identified as minor crystal phases in the glass–ceramic. No new phase was detected with the temperature increasing to 500 °C except for the further crystallization. Meanwhile, the water contact angles of the coatings decreased with the increase of heat-treatment temperature due to the great crystallization. The corrosion resistances of the coated magnesium alloys were studied by electrochemical corrosion techniques in the simulated body fluid. The results revealed that the coating heat-treated at 400 °C exhibited superior corrosion resistance because of less crystallization, suggesting that the calcium phosphate bioglass–ceramic coating can provide effective protection for magnesium alloy substrate to control its initial degradation in vivo and maintain the desired mechanical properties.     

Effects of PCL,PEG and PLGA polymers on curcumin release from calcium phosphate matrix for in vitro and in vivo bone regeneration

Calcium phosphate materials are widely used as bone-like scaffolds or coating for metallic hip and knee implants due to their excellent biocompatibility, compositional similarity to natural bone and controllable bioresorbability. Local delivery of drugs or osteogenic factors from scaffolds and implants are required over a desired period of time for an effectual treatment of various musculoskeletal disorders. Curcumin, an antioxidant and anti-inflammatory molecule, enhances osteoblastic activity in addition to its anti-osteoclastic activity. However, due to its poor solubility and high intestinal liver metabolism, it showed limited oral efficacy in various preclinical and clinical studies. To enhance its bioavailability and to provide higher release, we have used poly (ε-caprolactone) (PCL), poly ethylene glycol (PEG) and poly lactide co glycolide (PLGA) as the polymeric system to enable continuous release of curcumin from the hydroxyapatite matrix for 22 days. Additionally, curcumin was incorporated in plasma sprayed hydroxyapatite coated Ti6Al4V substrate to study in vitro cell material interaction using human fetal osteoblast (hFOB) cells for load bearing implants. MTT cell viability assay and morphological characterization by FESEM showed highest cell viability with samples coated with curcumin-PCL-PEG. Finally, 3D printed interconnected macro porous β-TCP scaffolds were prepared and curcumin-PCL-PEG was loaded to assess the effects of curcumin on in vivo bone regeneration. The presence of curcumin in TCP results in enhanced bone formation after 6 weeks. Complete mineralized bone formation increased from 29.6% to 44.9% in curcumin-coated scaffolds compared to pure TCP. Results show that local release of curcumin can be designed for both load bearing or non-load bearing implants with the aid of polymers, which can be considered an excellent candidate for wound healing and tissue regeneration applications in bone tissue engineering.     

In vitro Degradation and Biocompatibility of Ca-P Coated Magnesium Alloy

Calcium-phosphate compounds(Ca-P) coating was prepared on an Mg-Al alloy(AZ60). Biodegradation of Ca-P coated magnesium alloy was evaluated in simulated body fluid(SBF) by examining the changes in magnesium ion concentration and pH value, which indicated that the Ca-P coating on magnesium alloy strongly affected the corrosion of magnesium alloy. Osteoblast MC3T3-E1 cells were utilized to investigate the cellular cytocompatibility. The cytocompatibility was measured by carrying out a series of tests, such as cholecystokinin-octapeptide(CCK-8) test, alkaline phosphatase activity(ALP) test, cellular morphology of hematoxylin-eosin(HE) staining and the induction of apoptosis. It was found that the cell function showed better in the Ca-P coated Mg-alloy extract than in the uncoated magnesium alloy extract. In summary, the results indicate that the Ca-P coating can improve the corrosion resistance of magnesium alloy and elevate cellular proliferation and differentiation of osteoblast MC3T3-E1 cells.     

Improved antibacterial properties of an Mg‐Zn‐Ca alloy coated with chitosan nanofibers incorporating silver sulfadiazine multiwall carbon nanotubes for bone implants

Bacteria‐caused infection remains an issue in the treatment of bone defects by means of Mg‐Zn‐Ca alloy implants. This study aimed to improve the antibacterial properties of an Mg‐Zn‐Ca alloy by coating with chitosan‐based nanofibers with incorporated silver sulfadiazine (AgSD) and multiwall carbon nanotubes (MWCNTs). AgSD and MWCNTs were prepared at a weight ratio of 1:1 and then added to chitosan at varying concentrations (ie, 0, 0.25, 0.5, and 1.5 wt.%) to form composites. The obtained composites were ejected in nanofiber form using an electrospinning technique and coated on the surface of an Mg‐Zn‐Ca alloy to improve its antibacterial properties. A microstructural examination by scanning electron microscopy (SEM) revealed the diameter of chitosan nanofiber ejected increased with the concentration of AgSD‐MWCNTs. The incorporation of AgSD‐MWCNTs into the chitosan nanofibers was confirmed by Fourier transform infrared spectroscopy (FTIR). Examination of the antibacterial activity shows that chitosan nanofibers with AgSD‐MWCNTs can significantly inhibit the growth and infiltration of Escherichia coli and Staphylococcus aureus. Biocompatibility assay and cell morphology observations demonstrate that AgSD‐MWCNTs incorporated into nanofibers are cytocompatible. Taken together, the results of this study demonstrate the potential application of electrospun chitosan with AgSD‐MWCNTs as an antibacterial coating on Mg‐Zn‐Ca alloy implants for bone treatment.     

Investigation of interfacial interaction between uncoated and coated carbon fibres and the magnesium alloy AZ91

Unidirectionally reinforced metal-matrix composites with a fibre volume content between 63 and 68% were processed by squeeze casting using T800 H carbon fibres and the magnesium alloy AZ91. The surface of the fibres was prepared by thermal desizing of the fibres or by deposition of a pyrolytic carbon (pyC) coating. Different interfacial conditions could be identified by transmission electron microscopy (TEM) and the single-fibre push-in test. TEM confirmed the formation of needle-like phases at the fibre surface or, for coated fibres, within the pyrolytic carbon coating. During loading by the Vickers type indenter an intense response was observed for composites of coated fibres and the magnesium alloy. This could by caused by stick-slip effects within the pyrolytic carbon coating.     

A high performance nano-structure conductive coating on a Crofer22APU alloy fabricated by a novel spinel powder reduction coating technique

A nano-structure conductive coating was fabricated on a Crofer22APU alloy interconnect by an original coating strategy using Mn_0.9Y_0.1Co₂O₄ (MYC) novel spinel nanocrystalline powder. A unique treatment method by which the spinel powder was reduced was used to prepare the green coating. The resulting coating was about 12 μm in thickness, and was composed of MYC nanocrystalline with an average particle size of about 100 nm. The coating was well adhered with the substrate alloy. Less than 4 mΩ cm² of the area specific resistance (ASR) was obtained, and no obvious degradation was observed for a coated alloy (whose coating thickness was about 30 μm) after operated at 800 °C for 538 h under seven thermal cyclings. The coated alloy exhibited excellently electrical performance and long-term stability compared with the uncoated one. The exploration of the novel spinel powder reduction coating technique for alloy interconnect to obtain cheap coatings with excellent microstructure and performance showed a promising prospect for the practical application of solid oxide fuel cells (SOFCs).     

Polymer coatings on magnesium-based implants for orthopedic applications

Nowadays, the need for bio-implants, which can gradually degrade after fulfilling the therapeutic tasks is continuously increasing. Under such situation, magnesium (Mg) and its alloys have been proposed and intensively studied as the new-generation medical implants due to their favorable biodegradability and biocompatibility. However, their swift corrosion in physiological environments can always cause an early fracture and further the surgical failure, greatly hindering their broad applications. Therefore, great efforts have been made to alter the degradation behaviors of Mg-based implants. Biodegradable polymeric surface coatings have been revealed to be a straightforward and effective strategy for retarding the fast degradation and improving the bioactivity of Mg and its alloys. This article reviews the recent progress of polymer-based coatings on Mg substrates, regarding the coating strategies, coating properties, and their performance in corrosive protection and biocompatibility promotion via in vitro as well as some in vivo models. The specific pros and cons of different polymeric coatings are also discussed. Finally, we put forward some perspectives on the future direction of polymeric coatings on biomedical Mg-based implants to better adapt to clinical trials.     

Biocorrosion and osteoconductivity of PCL/nHAp composite porous film-based coating of magnesium alloy

The present study was aimed at designing a novel porous hydroxyapatite/poly(ε-caprolactone) (nHAp/PCL) hybrid nanocomposite matrix on a magnesium substrate with high and low porosity. The coated samples were prepared using a dip-coating technique in order to enhance the bioactivity and biocompatibility of the implant and to control the degradation rate of magnesium alloys. The mechanical and biocompatible properties of the coated and uncoated samples were investigated and an in vitro test for corrosion was conducted by electrochemical polarization and measurement of weight loss. The corrosion test results demonstrated that both the pristine PCL and nHAp/PCL composites showed good corrosion resistance in SBF. However, during the extended incubation time, the composite coatings exhibited more uniform and superior resistance to corrosion attack than pristine PCL, and were able to survive severe localized corrosion in physiological solution. Furthermore, the bioactivity of the composite film was determined by the rapid formation of uniform CaP nanoparticles on the sample surfaces during immersion in SBF. The mechanical integrity of the composite coatings displayed better performance (∼34% higher) than the uncoated samples. Finally, our results suggest that the nHAp incorporated with novel PCL composite membranes on magnesium substrates may serve as an excellent 3-D platform for cell attachment, proliferation, migration, and growth in bone tissue. This novel as-synthesized nHAp/PCL membrane on magnesium implants could be used as a potential material for orthopedic applications in the future.     

造孔剂对电泳沉积制备多孔HA涂层及其生物活性的影响

采用水热法制得的羟基磷灰石(HA)纳米粉体,分别与造孔剂葡萄糖(Glu)、壳聚糖(CS)、炭粉(C)3种微粒(＜38.5 μm)配置成质量比1∶1的悬浮液,电泳沉积 烧结制备钛基多孔HA涂层,并对制得的3种多孔HA涂层在模拟体液浸泡前后的表面形貌、化学组成及物相变化进行表征。 结果表明,经700 ℃烧结处理后制得的3种多孔HA涂层在1.5倍人体模拟体液中浸泡5 d后,多孔HA涂层表面均被层状生长的碳磷灰石颗粒完全覆盖,颗粒直径在5~25 μm,说明这些多孔HA涂层均具有良好的生物活性。 其中以CS为造孔剂制得的多孔HA涂层结合强度最高,达19.5 MPa,有望开发成为新型的人骨植入生物陶瓷材料。     

Sol–gel synthesis and characterisation of nanoporous zirconium titanate coated on 316L SS for biomedical applications

In this study, the nanoporous zirconium titanate was prepared using sol–gel process and coated over 316L SS implants via dip-coating technique. XRD patterns of zirconium titanate are crystalline and orthorhombic in structure. FT-IR spectra showed a broad band between 3,500 and 3,300 cm⁻¹, which was assigned to fundamental stretching vibrations of hydroxyl groups. The set of overlapping peaks in the range of 810–520 cm⁻¹ are related to Zr–O and Zr–O–Ti groups. SEM-EDAX and TEM showed the surface morphology of coated zirconium titanate to be porous and uniform. Excellent adhesion of the coating to the substrate has been achieved. The contact angle value was found to be 12°. The coating acts as a barrier layer to the metallic implants and induces the formation of hydroxyapatite layer on the metal surfaces. These results revealed that the nano zirconium titanate coated 316L SS exhibit higher bioactivity compared to that of uncoated 316L SS.     

Biomimetic Mineralized Fiber Bundle-Inspired Scaffolding Surface on Polyetheretherketone Implants Promotes Osseointegration

The stress shielding effect caused by traditional metal implants is circumvented by using polyetheretherketone (PEEK), due to its excellent mechanical properties; however, the biologically inert nature of PEEK limits its application. Endowing PEEK with biological activity to promote osseointegration would increase its applicability for bone replacement implants. A biomimetic study is performed, inspired by mineralized collagen fiber bundles that contact bone marrow mesenchymal stem cells (BMMSCs) on the native trabecular bone surface. The PEEK surface (P) is first sulfonated with sulfuric acid to form a porous network structure (sP). The surface is then encapsulated with amorphous hydroxyapatite (HA) by magnetron sputtering to form a biomimetic scaffold that resembles mineralized collagen fiber bundles (sPHA). Amorphous HA simulates the composition of osteogenic regions in vivo and exhibits strong biological activity. In vitro results show that more favorable cell adhesion and osteogenic differentiation can be attained with the novelsurface of sPHA than with SP. The results of in vivo experiments show that sPHA exhibits osteoinductive and osteoconductive activity and facilitates bone formation and osseointegration. Therefore, the surface modification strategy can significantly improve the biological activity of PEEK, facilitate effective osseointegration, and inspire further bionic modification of other inert polymers similar to PEEK.     

Corrosion resistance and cytotoxicity of a MgF2 coating on biomedical Mg–1Ca alloy via vacuum evaporation deposition method

To reduce the biocorrosion rate and enhance the biocompatibility by surface modification, MgF₂ coatings were prepared on Mg–1Ca alloy using vacuum evaporation deposition method. The average thickness of the coating was about 0.95 µm. The results of immersion test and electrochemical test indicated that the corrosion rate of Mg–1Ca alloy was effectively decreased after coating with MgF₂. The MgF₂ coating induced calcium phosphate deposition on Mg–1Ca alloy. After 72 h culture, MG63 cells and MC3T3‐E1 cells were well spread on the surface of the MgF₂‐coated Mg–1Ca alloy, while few cells were observed on uncoated Mg–1Ca alloy samples. In summary, MgF₂ coating showed beneficial effects on the corrosion resistance and thus improved cell response of the Mg–1Ca alloy effectively and should be a good surface modification method for other biomedical magnesium alloys. Copyright © 2013 John Wiley & Sons, Ltd.