High‐Performance Organic Materials for Dye‐Sensitized Solar Cells: Triarylene‐Linked Dyads with a 4‐tert‐Butylphenylamine Donor

A series of organic dyes were prepared that displayed remarkable solar‐to‐energy conversion efficiencies in dye‐sensitized solar cells (DSSCs). These dyes are composed of a 4‐tert‐butylphenylamine donor group (D), a cyanoacrylic‐acid acceptor group (A), and a phenylene‐thiophene‐phenylene (PSP) spacer group, forming a D‐π‐A system. A dye containing a bulky tert‐butylphenylene‐substituted carbazole (CB) donor group showed the highest performance, with an overall conversion efficiency of 6.70 %. The performance of the device was correlated to the structural features of the donor groups; that is, the presence of a tert‐butyl group can not only enhance the electron‐donating ability of the donor, but can also suppress intermolecular aggregation. A typical device made with the CB‐PSP dye afforded a maximum photon‐to‐current conversion efficiency (IPCE) of 80 % in the region 400–480 nm, a short‐circuit photocurrent density J_sc=14.63 mA cm^?2, an open‐circuit photovoltage V_oc=0.685 V, and a fill factor FF=0.67. When chenodeoxycholic acid (CDCA) was used as a co‐absorbent, the open‐circuit voltage of CB‐PSP was elevated significantly, yet the overall performance decreased by 16–18 %. This result indicated that the presence of 4‐tert‐butylphenyl substituents can effectively inhibit self‐aggregation, even without CDCA.     

Room-Temperature Phosphorescence from a Series of 3-Pyridylcarbazole Derivatives

Exploration of pure metal-free organic molecules that exhibit strong room-temperature phosphorescence (RTP) is an emerging research topic. In this regard, unveiling the design principles for an efficient RTP molecule is an essential, but challenging, task. A small molecule is an ideal platform to precisely understand the fundamental role of each functional component because the parent molecule can be easily derivatized. Here, the RTP behaviors of a series of 3-pyridylcarbazole derivatives are presented. Experimental studies in combination with theoretical calculations reveal the crucial role of the n orbital on the central pyridine ring in the dramatic enhancement of the intersystem crossing between the charge-transfer-excited singlet state and the locally excited triplet states. Single-crystal X-ray crystallographic studies apparently indicate that both the pyridine ring and fluorine atom contribute to the enhancement of the RTP because of the restricted motion owing to weak C−H⋅⋅⋅N and H⋅⋅⋅F hydrogen-bonding interactions. The single crystal of the fluorine-substituted derivative shows an ultra-long phosphorescent lifetime (τ_P) of 1.1 s and a phosphorescence quantum yield (Φ_P) of 1.2 %, whereas the bromine-substituted derivative exhibits τ_P of 0.15 s with a Φ_P of 7.9 %. We believe that this work provides a fundamental and universal guideline for the generation of pure organic molecules exhibiting strong RTP.     

Two Distinct Thermal Stabilities of DNA and Enzymatic Activities of DNase I in a Multistep Assembly with Carbazole Ligands: Different Binding Characteristics for Duplex and Quadruplex DNA

A partially hydrophobic carbazole ligand ((Im⁺)₂Cz: 2,2′‐(9‐ethyl‐9 H‐carbazole‐3,6‐diyl)bis(ethyne‐2,1‐diyl)bis(1,3‐dimethyl‐1 H‐imidazol‐3‐ium)) adopts two different binding states (binding states I and II) in its interactions with calf‐thymus (ct‐) DNA. Two distinct binding states were identified by biphasic UV/Vis and circular dichroism (CD) spectral changes during the titration of DNA into the carbazole ligand. At low concentrations of ct‐DNA, (Im⁺)₂Cz binds to nearly every part of ct‐DNA (binding state I). By contrast, an increased concentration of ct‐DNA results in a switch in the DNA‐binding state, so that the ligands are bound per five DNA base pairs. Similarly, a monocationic carbazole ligand (Im⁺Cz: 2‐((6‐bromo‐9‐ethyl‐9 H‐carbazol‐3‐yl)ethynyl)‐1,3‐dimethyl‐1 H‐imidazol‐3‐ium) also shows biphasic UV/Vis spectral changes during the titration of ct‐DNA into Im⁺Cz, which suggests two different binding states of the Im⁺Cz ligand with ct‐DNA. The stepwise equilibrium of the ligand–DNA‐complex formation is capable of switching the thermal stability of ct‐DNA, as well as the enzymatic activity of deoxyribonuclease (DNase I). In binding state I, the (Im⁺)₂Cz ligands interact with nearly every base pair in ct‐DNA and stabilize the double‐helix structure, which results in a larger increase in the melting temperature of the ct‐DNA than that observed with binding state II. On the other hand, the (Im⁺)₂Cz ligand significantly reduces the enzymatic activity of DNase I in binding state I, although the enzymatic activity is recovered once the binding state of the ligand–DNA complex is changed to binding state II. The (Im⁺)₂Cz ligand was also employed as a binder for G‐quadruplex DNA. In contrast to the stepwise complex formation between (Im⁺)₂Cz and ct‐DNA, (Im⁺)₂Cz shows a monotonous UV/Vis spectral response during the titration of G‐quadruplex DNA into (Im⁺)₂Cz, which suggests a single binding state for (Im⁺)₂Cz with G‐quadruplex DNA.     

Synthesis of N-Alkyl and N-H-Carbazoles through SNAr-Based Aminations of Dibenzothiophene Dioxides

Alkyl amines have become available for the synthesis of diverse N-alkyl carbazoles through twofold S_NAr aminations of dibenzothiophene dioxides by using alkali metal bases. Of particular importance is the choice of counter cations on alkali metal bases, that is, i) the use of Li base for the efficient intermolecular reaction and ii) the sequential addition of heavier alkali metal bases (Na, K, or Cs) to promote intramolecular cyclization in a one-pot manner. This protocol also enables the cascade synthesis of N-H-carbazoles by using 2-phenylethylamine by removal of the 2-phenethyl group from N-(2-phenethyl) carbazoles in a single operation.     

Aggregation-Induced Circularly Polarized Luminescence from Boron Complexes with a Carbazolyl Schiff Base

A variety of carbazolyl-appended Schiff bases were readily synthesized from 1-formylcarbazoles and aniline derivatives. Boron complexation of the resulting ligands allowed for facile preparation of new carbazole-based BODIPY analogues showing solid-state fluorescence. Furthermore, some dyes were converted into chiral compounds through the Et₂AlCl-mediated incorporation of a binaphthyl unit. The chiral dyes showed aggregation-induced fluorescence and circularly polarized luminescence (CPL) with the Φ_F and g_lum of up to 0.22 and −3.5×10⁻³, respectively, in the solid state. The solid-state fluorescence and CPL were well characterized by the crystal packing analyses and DFT calculations.     

Simple Bipolar Hosts with High Glass Transition Temperatures Based on 1,8‐Disubstituted Carbazole for Efficient Blue and Green Electrophosphorescent Devices with “Ideal” Turn‐on Voltage

Two hybrids based on 1,8‐disubstituted carbazole, 1,8‐OXDCz and 1,8‐mBICz , have been designed and synthesized through a facile process. The incorporation of oxadiazole or N‐phenylbenzimidazole moieties at the 1,8‐positions of carbazole greatly improves its morphological stability, giving glass transition temperatures (T_g) as high as 138 and 154 °C, respectively. Blue phosphorescent organic light‐emitting devices (PhOLEDs) with 1,8‐mBICz exhibit almost the same performance as a similarly structured device based on the mCP host, and green PhOLEDs employing the new host material 1,8‐OXDCz exhibit an ideal turn‐on voltage (2.5 V at 1.58 cd m^?2), a maximum current efficiency (η_c,max) of 73.9 cd A^?1, and a power efficiency (η_p,max) of 89.7 lm W^?1. These results are among the best performances of [Ir(ppy)₃]‐based devices with simple device configurations.     

π-Extended Carbazole Derivatives as Host Materials for Highly Efficient and Long-Life Green Phosphorescent Organic Light-Emitting Diodes

High-performance organic light-emitting diodes (OLEDs) that use phosphorescent and/or thermally activated delayed fluorescence emitters are capable of realizing 100 % electron-to-photon conversion. The host materials in these OLEDs play crucial roles in determining OLED performance. Carbazole derivatives are frequently used as host materials, among which 3,3-bis(9H-carbazol-9-yl)biphenyl ( mCBP ) is often used for lifetime testing in scientific studies. In this study, the π conjugation of the carbazole unit was expanded to enhance OLED lifetime by designing and developing two benzothienocarbazole (BTCz)-based host materials, namely m1BTCBP and m4BTCBP . Among these host materials, m1BTCBP formed a highly efficient [Ir(ppy)₃]-based OLED with an operational luminescence half-life (LT₅₀) of over 300 h at an initial luminance of approximately 12000 cd m⁻² (current density: 25 mA cm⁻²). The LT₅₀ value at 1000 cd cm⁻² was estimated to be about 23 000 h. This performance is clearly higher than that of mCBP -based OLEDs (LT₅₀≈8500 h).     

Junction‐Controlled Topological Polymerization

Methodology that enables the controlled synthesis of linear and branched polymers from an identical monomer will be a novel pathway for polymer synthesis and processing. Herein we first describe the control of one or both of the C(3)‐C(3′) and C(6)‐C(6′) coupling reactions of carbazolyl. In a second approach, an identical monomer containing two carbazolyls is polymerized using chemical and electrochemical oxidizers, leading to topologically controllable growth of linear polymers in weak oxidizer or of cross‐linked polymer chains in strong oxidizer, with satisfactory long chain propagation of step growth polymerization (M_n=6.0×10⁴ g mol^?1, M_w/M_n=2.3). This very simple polymerization with cheap reagents and low levels of waste has provided a flexible pathway for synthesis and processing of polymers.     

Dynamic Covalent Properties of a Novel Indolo[3,2-b]carbazole Diradical

This work describes the synthesis and properties of a dicyanomethylene-substituted indolo[3,2-b]carbazole diradical ICz-CN. This quinoidal system dimerises almost completely to (ICz-CN)₂, which contains two long C(sp³)−C(sp³) σ-bonds between the dicyanomethylene units. The minor open-shell ICz-CN component in the solid-state mixture was identified by EPR spectroscopy. Cyclic voltammetry and UV–visible spectroelectrochemical data, as well as comparison with reference monomer ICz-Br reveal that the nature of the one-electron oxidation of (ICz-CN)₂ at ambient temperature and ICz-CN at elevated temperature is very similar in all these compounds due to the prevailing localization of their HOMO on the ICz backbone. The peculiar cathodic behaviour reflects the co-existence of (ICz-CN)₂ and ICz-CN. The involvement of the dicyanomethylene groups stabilizes the close-lying LUMO and LUMO+1 of (ICz-CN)₂ and especially ICz-CN compared to ICz-Br, resulting in a distinctive cathodic response at low overpotentials. Differently from neutral ICz-CN, its radical anion and dianion are remarkably stable under ambient conditions. The UV/Vis(–NIR) electronic transitions in parent (ICz-CN)₂ and ICz-CN and their different redox forms have been assigned convincingly with the aid of TD-DFT calculations. The σ-bond in neutral (ICz-CN)₂ is cleaved in solution and in the solid-state upon soft external stimuli (temperature, pressure), showing a strong chromism from light yellow to blue–green. Notably, in the solid state, the monomeric diradical species is predominantly formed under high hydrostatic pressure (>1 GPa).     

The Phase Relations in the System In2O3–TiO2–MgO at 1100 and 1350°C

The phase relations in the system In₂O₃–TiO₂–MgO at 1100 and 1350°C are determined by a classical quenching method. In this system, there are four pseudobinary compounds, In₂TiO₅, MgTi₂O₅ (pseudobrookite type), MgTiO₃ (ilmenite type), and Mg₂TiO₄ (spinel type) at 1100°C. At 1350°C, in addition to these compounds there exist a spinel-type solid solution Mg_2−xIn_2xTi_1−xO₄ (0≤x≤1) and a compound In₆Ti₆MgO₂₂ with lattice constants a=5.9236(7) Å, b=3.3862(4) Å, c=6.3609(7) Å, β=108.15(1)°, and q=0.369, which is isostructural with the monoclinic In₃Ti₂FeO₁₀ in the system In₂O₃–TiO₂–MgO. The relation between the lattice constants of the spinel phase and the composition nearly satisfies Vegard's law. In₆Ti₆MgO₂₂ extends a solid solution range to In₂₀Ti₁₇Mg₃O₆₇ with lattice constants of a=5.9230(5) Å, b=3.3823(3) Å, c=6.3698(6) Å, β=108.10(5)°, and q=0.360. The distributions of constituent cations in the solid solutions are discussed in terms of their ionic radius and site preference effect.     

Syntheses and characterization of two oxoborates, (Pb3O)2(BO3)2MO4 (M=Cr, Mo)

Two oxoborates, (Pb₃O)₂(BO₃)₂MO₄ (M=Cr, Mo), have been prepared by solid-state reactions below 700 °C. Single-crystal XRD analyses showed that the Cr compound crystallizes in the orthorhombic group Pnma with a=6.4160(13) Å, b=11.635(2) Å, c=18.164(4) Å, Z=4 and the Mo analog in the group Cmcm with a=18.446(4) Å, b=6.3557(13) Å, c=11.657(2) Å, Z=4. Both compounds are characterized by one-dimensional chains formed by corner-sharing OPb₄ tetrahedra. BO₃ and CrO₄ (MoO₄) groups are located around the chains to hold them together via Pb–O bonds. The IR spectra further confirmed the presence of BO₃ groups in both structures and UV–vis diffuse reflectance spectra showed band gaps of about 1.8 and 2.9 eV for the Cr and Mo compounds, respectively. Band structure calculations indicated that (Pb₃O)₂(BO₃)₂MoO₄ is a direct semiconductor with the calculated energy gap of about 2.4 eV.     

Vibrational frequencies and force constants of N2O4 in complexes with molecules of different solvents determined by Raman spectra andAb initio calculation

The Raman spectra of N₂O₄ solutions in organic solvents have been recorded. The frequencies ofv ₁,v ₂, andv ₃ bands of N₂O₄ increase with increasing solvent electron-donor properties. Especially large changes ofv ₃ N-N stretching band have been observed (254.5 cm^–1 in n-hexane, 276.5 cm^–1 in 1,4-dioxane). The ab initio calculations have shown that the interaction between N₂O₄ and electron-donor molecules causes an increase of N-N and N-O stretching and O-N-O bending force constants of N₂O₄ in agreement with the results of Raman study.     

The compounds KAs4O6 X (X=Cl,Br, I) and NH4As4O6 X (X=Br,I): Hydrothermal syntheses and structure determinations

The crystal structures of five isotypic hexagonal compounds with general formulaMAs₄O₆ X [M=K, NH₄;X=Cl, Br, I; space group: P622;Z=1] were determined from 370 single crystal X-ray data and refined toR values <0.05. The structure type is characterized by neutral charged [As₂O₃] sheets arranged parallel (00.1). The As atoms of neighbouring two sheets point to each other and the sheets are combined by interlayeredM andX atoms, respectively. TheM atoms are coordinated to twelve oxygen atoms, theX atoms are coordinated to twelve arsenic atoms. In both cases the coordination polyhedron is a hexagonal prism. The compounds were synthesized by thermal treatments of cubic As₂O₃ and potassium or ammonium haloids in a saturated aqueous solution of potassium acetate resp. ammonia [500 K, saturation vapour pressure].

---

Die Verbindungen KAs₄O₆ X (X=Cl, Br, I) und NH₄As₄O₆ X (X=Br, I): Hydrothermalsynthese und Strukturbestimmung

Zusammenfassung Die Kristallstrukturen der fünf isotypen hexagonalen Verbindungen mit der allgemeinen FormelMAs₄O₆ X [M=K, NH₄;X=Cl, Br, I; Raumgruppe: P622;Z=1] wurden anhand von 370 Einkristall-Röntgendaten bestimmt und aufR-Werte <0.05 verfeinert. Der Strukturtyp ist ausgezeichnet durch neutrale [As₂O₃]-Schichten, die parallel (00.1) angeordnet sind. Die As-Atome zweier benachbarter Schichten weisen jeweils aufeinander zu, und die Schichten selbst werden durch zwischengelagerteM- bzw.X-Atome verbunden. DieM-Atome werden jeweils von zwölf O-Atomen, dieX-Atome von zwölf As-Atomen umgeben. Das Koordinationspolyeder ist in beiden Fällen ein hexagonales Primsa. Die einzelnen Verbindungen wurden unter Hydrothermalbedingungen aus kubischem As₂O₃ und dem jeweiligen Kalium- oder Ammoniumhalogenid in einer gesättigten wäßrigen Lösung von Kaliumacetat bzw. Ammoniak synthetisiert (500 K, Sättigungsdampfdruck).

     

Synthesis, Structure, and 31P NMR of Sulfur/Oxygen-Bridged Incomplete Cubane-Type Molybdenum and Tungsten Clusters with Triphenylphosphine Ligands

Sulfur/oxygen-bridged incomplete cubane-type triphenylphosphine molybdenum and tungsten-clusters [Mo₃S₄Cl₄(H₂O)₂(PPh₃)₃]·3THF (1A), [Mo₃S₄Cl₄(H₂O)₂(PPh₃)₃]·2THF (2A), [Mo₃OS₃Cl₄(H₂O)₂(PPh₃)₃]·2THF (1B), and [W₃S₄Cl₄(H₂O)₂(PPh₃)₃]·2THF (1C) were prepared from the corresponding aqua clusters and PPh₃ in THF/MeOH. On recrystallization from THF, procedures with and without addition of hexane to the solution gave 1A and 2A, respectively, while the procedures gave no effect on the formation of 1B and 1C. Crystallographic results obtained are as follows: 1A: monoclinic, P2₁/n, a=17.141(4) Å, b=22.579(5) Å, c=19.069(4) Å, =96.18(2)°, V=7337(3) ų, Z=4, R(R _w)=0.078(0.102); 1C: monoclinic, P2 ₁/c, a=12.635(1) Å, b=20.216(4) Å, c=27.815(3) Å, =96.16(1)°, V=7062(2) ų, Z=4, R(R _w)=0.071(0.083). If the phenyl groups are ignored, the molecule [Mo₃S₄Cl₄(H₂O)₂(PPh₃)₃] in 2A has idealized CS symmetry with the mirror plane perpendicular to the plane determined by the metal atoms, while the molecule in 1A does not have the symmetry. The tungsten compound 1C is isomorphous with the molybdenum compound 2A. ³¹P NMR spectra of 1A, 2A, and 1C were obtained and compared with similar clusters with dmpe (1,2-bis(dimethylphosphino)ethane) ligands.     

Rate constant for the reaction of bromine atoms with ethane: Kinetic and thermochemical implications

Relative-rate kinetic experiments were carried-out at T = 310 ± 3 K to determine rate constant ratios for the reactions of Br atoms with C₂H₆(1), CH₂ClBr(2) and neo-C₅H₁₂(3). Br atoms were produced by stationary photolysis of Br₂ and the consumption of the reactants was determined by gas-chromatography. k ₂/k ₁ = 1.174 ± 0.053 and k ₃/k ₁ = 0.458 ± 0.027 were determined (with 1σ precision given). The rate constant ratios were resolved to absolute k ₁ values, and k ₁(310 K) = (2.27 ± 0.30) × 10⁵ cm³ mol⁻¹ s⁻¹ was recommended. The recommended k ₁ was applied in a third law analysis providing Δ_f H ^o ₂₉₈(C₂H₅) = (122.0 ± 1.9) kJ mol⁻¹.     

新铌酸盐化合物K6Zr2Nb14O42的合成

一些铌酸盐晶体具有优良的非线性光学性质,它们在激光倍频、电光调制、参量振荡、实时全息存贮等领域均具有潜在的广泛的应用前景,因此新铌酸盐晶体的人工合成、结构及性能研究工作受到了重视［１－３］,吴伯麟等曾报道了在Ｋ２Ｏ－Ｃｒ２Ｏ３－Ｎｂ２Ｏ５体系中存在一...     

Formation and properties of the Fe<Subscript>8</Subscript>V<Subscript>10</Subscript>W<Subscript>16–x</Subscript>Mo<Subscript>x</Subscript>O<Subscript>85</Subscript> type solid solution

Solid solution phases of a formula Fe₈V₁₀W_16–xMo_xO₈₅ where 0≤x≤4, have been obtained, possessing a structure of the compound Fe₈V₁₀W₁₆O₈₅. It was found on the base of XRD and DTA investigations that these solution phases melted incongruently, with increasing the value of x, in the temperature range from 1108 (x=0) to 1083 K (x=4) depositing Fe₂WO₆ and WO₃. The increase of the Mo⁶⁺ ions content in the crystal lattice of Fe₈V₁₀W₁₆O₈₅ causes the lattice parameters a=b contraction with cbeing almost constant. IR spectra of the Fe₈V₁₀W_16–xMo_xO₈₅ solid solution phases have been recorded.     

Electronic structures of the boron cage molecules B4H4, B4Cl4 and B4F4

Ab initio calculations have been performed on B₄H₄, B₄Cl₄ and B₄F₄ in order to aid our understanding of the bonding in these compounds, which is presumably based on a tetrahedral boron cage. This cage has only 8 electrons and so is less than that expected on the basis of the usual framework electron counting rules. Basis sets with polarisation functions were used at the SCF, CI and CPF levels of theory to confirm that the T _d structures are indeed more stable than the D _4h ones. Davidson-Roby population analyses were able to show that many factors, including 3-centre 2-electron bonding and backbonding from the ligand to the boron cage, are of importance in determining the relative stability of the three compounds, of which B₄Cl₄ is the only one that has yet been observed experimentally.     

X-ray diffraction and Mössbauer spectroscopy studies of LiFe0.5Ti1.5O4 – A new primitive cubic ordered spinel

LiFe_0.5Ti_1.5O₄ was synthesized by solid-state reaction carried out at 900 °C in flowing argon atmosphere, followed by rapid quenching of the reaction product to room temperature. The compound has been characterized by X-ray powder diffraction (XRD) and ⁵⁷Fe Mössbauer effect spectroscopy (MES). It crystallizes in the space group P4₃32, a = 8.4048(1) Å. Results from Rietveld structural refinement indicated 1:3 cation ordering on the octahedral sites: Li occupies the octahedral (4b) sites, Ti occupies the octahedral (12d) sites, while the tetrahedral (8c) sites have mixed (Fe/Li) occupancy. A small, about 5%, inversion of Fe on the (4b) sites has been detected. The MES data is consistent with cation distribution and oxidation state of Fe, determined from the structural data.The title compound is thermally unstable in air atmosphere. At 800 °C it transforms to a mixture of two Fe³⁺ containing phases – a face centred cubic spinel Li_(1+y)/2Fe_(5−3y)/2Ti_yO₄ and a Li_(z−1)/2Fe_(7−3z)/2Ti_zO₅ – pseudobrookite. The major product of thermal treatment at 1000 °C is a ramsdellite type lithium titanium iron(III) oxide, accompanied by traces of rutile and pseudobrookite.