Preparation and characterization of thin films of SiO(x) on gold substrates for surface plasmon resonance studies

We report here on the fabrication and characterization of stable thin films of amorphous silica (SiO(x)) deposited on glass slides coated with a 5 nm adhesion layer of titanium and 50 nm of gold, using the plasma-enhanced chemical vapor deposition (PECVD) technique. The resulting surfaces were characterized using atomic force microscopy (AFM), ellipsometry, contact angle measurements, and surface plasmon resonance (SPR). AFM analysis indicates that homogeneous films of silica with low roughness were formed on the gold surface. The deposited silica films showed excellent stability in different solvents and in piranha solution. There was no significant variation in the thickness or in the SPR signal after these harsh treatments. The Au/SiO(x) interfaces were investigated for their potential applications as new surface plasmon resonance sensor chips. Silica films with thicknesses up to 40 nm allowed visualization of the surface plasmon effect, while thicker films resulted in the loss of the SPR characteristics. SPR allowed further the determination of the silica thickness and was compared to ellipsometric results. Chemical treatment of the SiO(x) film with piranha solution led to the generation of silanol surface groups that have been coupled with a trichlorosilane.     

Theoretical analysis of gold-deposited optical fiber sensor and characterization of the gold film.

Gold-deposited optical fiber sensors with film thicknesses from 30 to 60 nm were prepared, and the responses to a wide range of a refractivity (1.33-1.54 refractive index (RI) units) were investigated both experimentally and theoretically. The response curve of the sensor has two minima in the refractivity range from 1.33 to 1.44 and at 1.462 RI units. The former minimum is due to surface plasmon resonance (SPR) in the thin gold film, and shifts to a lower refractivity as the film becomes thicker. The response curves of the sensors with film thicknesses of 45 and 60 nm agreed well with those calculated from SPR theoretical equations. Morphology observations of the surfaces of deposited gold films on glass by atomic force microscopy (AFM) and a variation in resistance of the films with various thicknesses show the structure of the gold films. We concluded that the thin deposited gold films have many defects, and that the core of the gold-deposited optical fiber leaks light through the defects to the sample solution with the same refractivity (1.462 RI units) as that of the core.     

Electrochemical Surface Plasmon Resonance Spectroscopy at Bilayered Silver/Gold Films

Bilayered silver/gold films (gold deposited on top of the silver film) were used as substrates for electrochemical surface plasmon resonance spectroscopy (EC-SPR). EC-SPR responses of electrochemical deposition/stripping of copper and redox-induced conformation changes of cytochrome c immobilized onto self-assembled monolayers preformed at these substrates were measured. Influence of the Ag layer thickness and the double-layer capacitance on the EC-SPR behavior was investigated. The results demonstrated that the bilayered Ag/Au metal films produce a sharper SPR dip profile than pure Au films and retain the high chemical stability of Au films. Contrary to the result by the Fresnel calculation that predicts a greater fraction of Ag in the bilayered film should result in a greater signal-to-noise ratio, the EC-SPR sensitivity is dependent on both the Ag/Au thickness ratio and the chemical modification of the surface. Factors affecting the overall SPR sensitivity at the bilayered films, such as the film morphology, potential-induced excess surface charges, and the adsorbate layer were investigated. Forming a compact adsorbate layer at the bilayered film diminishes the effect of potential-induce excess surface charges on the SPR signal and improves the overall EC-SPR sensitivity. For the case of redox-induced conformation changes of cytochrome c, the SPR signal obtained at the bilayered silver/gold film is 2.7 times as high as that at a pure gold film.     

Thin chitosan films as a platform for SPR sensing of ferric ions

Homogeneous chitosan films of various thicknesses (10-65 nm) were deposited on thin gold films through spin coating. The resulting interfaces were characterized using surface plasmon resonance (SPR), AFM, profilometry and cyclic voltammetry. The strong chelating properties of chitosan films to Fe(3+) were investigated using cyclic voltammetry. Through SPR measurements, an affinity constant between chitosan and Fe(3+) of 9.49 x 10(5) M(-1) was determined with a detection limit as low as 250 ppb.     

Electrochemical AFM on surface grafted poly(ferrocenylsilanes)

Ethylenesulfide and trimethylenesulfide end‐functionalized poly(ferrocenyldimethylsilanes) (ES‐PFS and TMS‐PFS) with different degrees of polymerization were prepared via anionic ring‐opening polymerization. Molecular characterization of ES‐PFS was carried out by using ¹H‐NMR, GPC, FTIR, and elemental analysis. Thin films of ES‐PFS were prepared by immersing gold(111) substrates into 1.0 mg/ml solutions of the polymers in toluene. The polymeric films were characterized by FTIR, XPS, and contact angle measurements. Thicknesses of the grafted films were measured by SPR. Thicknesses determined by SPR and the theoretically calculated values are in a reasonable agreement. The morphology of the films was studied by tapping mode AFM. The electrochemical behavior of the films was monitored by cyclic voltammetry (CV). CVs show two reversible redox peaks, indicating a stepwise oxidation of the iron atoms in the polymer chains. Scanning Electrochemical Force Microscopy (SEFM) allowed us to study in situ the morphological changes occurring in the film upon electrochemical oxidation or reduction. AFM images indicated that in the oxidized form the chains were stretched due to electrostatic repulsion.     

The preparation and characterization of poly(o-phenylenediamine)/gold nanoparticles interface for immunoassay by surface plasmon resonance and electrochemistry

The poly-o-phenylenediamine (PoPD) nonconducting film and gold nanoparticles (AuNPs) were combined to fabricate AuNPs/PoPD film, which is used as a novel biocompatible interface for the immobilization of antibody and develop a simple and sensitive label-free immunoassay for the detection of the related antigen (human immunoglobulin G (IgG)). Surface plasmon resonance (SPR) and electrochemical methods were used to provide the real-time information about the polymer film growth, assembling of various sizes of gold nanoparticles, anti-human IgG antibody (anti-hIgG) immobilization and the antigen–antibody interaction. The microstructures of the PoPD and AuNPs/PoPD films were characterized by atomic force microscopy (AFM). These results demonstrated that AuNPs were uniformly dispersed on the porous surface of PoPD film, which formed a nano-structure biocompatible AuNPs/PoPD interface. The use of gold nanoparticles and PoPD film could enhance the immunoassay sensitivity and anti-nonspecific property of the resulting immunoassay electrode. Additionally, the reproducibility and preliminary application of anti-hIgG/AuNPs/PoPD/Au electrode for SPR detection of hIgG was also evaluated.     

Stability of thin stagnant film on a solid surface with a viscoelastic air-liquid interface

Linear stability analysis for a film on a solid surface with a viscoelastic air-liquid interface is presented. The interfacial dilatational and shear viscoelastic properties were described by Maxwell models. Dilatational and shear interfacial elasticity and viscosity were shown to improve film stability. When the interfacial rheological properties are extremely large or small, the maximum perturbation growth coefficient is shown to reduce to those for immobile and mobile interfaces respectively. Calculated values of maximum growth coefficient for thin film stabilized by 0.5% beta-lactoglobulin approached those of mobile films for thick (>2000 nm) and those for immobile films for thin (<100 nm) films respectively with the values lying between the two limits for intermediate film thicknesses.     

Langmuir-Blodgett-Kuhn and self-assembled films of asymmetrically substituted poly(paraphenylene)

Asymmetrically substituted poly(paraphenylene) (PhPPP) with hydrophilic and hydrophobic side chains was investigated. The polymer behavior at the air-water interface was studied on the basis of surface pressure-area (pi-A) isotherms and compression/expansion hysteresis measurements. PhPPP can form stable monolayers with an area per repeat unit of A=0.20+/-0.02 nm2 and a collapse pressure in the range of pi=25 mN/m. Then, Langmuir-Blodgett-Kuhn (LBK) films of PhPPP were prepared by horizontally and vertically transferring the Langmuir monolayers onto hydrophilic solid substrates at pi=12 mN/m. Cross-section analysis of the AFM tapping-mode topography images of a single transferred monolayer reveals a thickness of d0=0.9+/-0.1 nm. Taking into account the obtained monolayer thickness, curve-fitting calculations of angular scan data of LB monolayers measured using surface plasmon resonance (SPR) spectroscopy lead to a value for the refractive index of n=1.78+/-0.02 at lambda=632.8 nm. Next, the spontaneous formation of a PhPPP monolayer by adsorption from solution was studied ex situ by atomic force microscopy and UV-vis spectroscopy and in situ by using SPR spectroscopy. Stable self-assembled monolayers of PhPPP can be formed on hydrophilic surfaces with a thickness similar to that of the monolayer obtained using the LB method. The characterization results confirmed the amphiphilic character and the self-assembly properties of PhPPP, as well as the possibility of preparing homogeneous monolayer and multilayer films.     

Analytical characterization of thin carbon films

CH(x) films on silicon substrates deposited by a Mesh Hollow Cathode Process (MHC) were analyzed by various techniques. The films were produced with varying deposition times, resulting in thicknesses ranging from ~2-20 nm. X-Ray Reflectivity (XRR) was used to determine the film thicknesses and the deposition rate. A good correlation of measured XRR thicknesses with SIMS sputter depths down to the film-substrate transition was found.An AFM-based nanoscratching technique was applied to test the wear resistance of the thin overcoats. The MHC films reveal slightly decreasing scratch resistance for reduced film thicknesses, which can be explained by a higher fraction of soft interface zones for thinner films.This is in accordance with Raman spectroscopic measurements in the visible spectral range which were carried out to examine the carbon bonding properties. Combined analysis of G peak position and D/G peak intensity ratio indicates a more graphitic structure for film thicknesses less than 10 nm.     

Fabrication and characterization of multilayer films from amphiphilic poly(p-phenylene)s

Over the past two decades, considerable efforts have been devoted to the development of conjugated polymeric materials for electronic applications due to the tunability of their properties through variation of their chemical structure. The LB technique is one of the most effective and precise methods for controlling the organization and thereby the properties of polymer films at the nanoscale for device fabrication. A detailed study was performed on the Langmuir-Schaefer (LS) monolayer and Langmuir-Blodgett-Kuhn (LBK) multilayer formation of newly designed conjugated poly(p-phenylene)s (C(n)PPPOH), incorporated with alkoxy groups with different chain lengths (C(6)H(13)O-, C(12)H(25)O-, and C(18)H(37)O-) and hydroxyl groups on the polymer backbone. The monolayer formed at the air-water interface was characterized using surface pressure-area isotherms, including hysteresis measurements. The films were then transferred to different hydrophilic solid substrates and analyzed using surface plasmon resonance spectroscopy, UV-vis spectroscopy, fluorescence spectroscopy, and AFM measurements. The results showed that the polymer with a short alkoxy chain (C(6)PPPOH) forms uniform monolayers at the air-water interface and can be transferred as multilayer films compared to C(12)PPPOH and C(18)PPPOH. The observed film thicknesses measured by SPR and AFM studies were similar to the theoretical value obtained in the case of C(6)PPPOH, whereas this was not the case with the other two polymers. The present study shows that the polymer C(n)PPPOH with short alkoxy chain can be transferred onto different solid substrates for device fabrication with molecular level control.     

Investigating aluminum thin films properties by stochastic analysis

In this article, we investigate about stochastic properties of a thin film such as aluminum thin film that is formed by thermal evaporation in high vacuum. So we prepare thin films with different thicknesses on glass surfaces in high vacuum chamber with 10^?6 torr. Then, we use Atomic Force Microscopy (AFM), for determining the height fluctuations of aluminum thin films in different growth stages and use an inverse method that utilizes data from AFM to construct a simple equation that governs the stochastic process and a relation between stochastic parameters such as roughness, correlation and Markov length, drift, and diffusion coefficients during the growth process. Also we show that aluminum thin films, during growth by evaporating in high vacuum chamber, have a mono fractal behavior in small distances(little than 100 nm) on the surfaces. Copyright © 2008 John Wiley & Sons, Ltd.     

Electrochemical nanostructuring of fullerene films--spectroscopic evidence for C60 polymer formation and hydrogenation

Electrochemical reduction of ordered C60 fullerene films in aqueous solution was studied by AFM, FTIR and Raman spectroscopy, mass spectrometry and elastic recoil detection analysis. During the irreversible reduction process the film morphology changed from a heteroepitaxial (111) surface to a nanostructured array with clusters of 20 to 50 nm lateral size on average. On the molecular level the initial C60 underwent electrochemical reactions to form C60 polymers and hydrogenated C60. Chemical follow-up reactions of electrochemically formed C60- with water are responsible for the different reduction behaviour of C60 films in aqueous solution compared to C60 reduction in organic solvents and to C60 doping with alkali metals. Based on the spectroscopic analysis a reaction scheme accounting for the chemical processes at the C60 / aqueous electrolyte interface is presented.     

新型偶氮苯自组装一LB组合有序膜的构造与表征

偶氮兹及其衍生物具有独特的光致异构化和电化学反应机制,其LB单分子膜作为一种高度有序的分子组装体系,以其诱人的应用前景引起了人们的极大兴趣．然而在这方面的研究中,LB膜通常是沉积在SnO。或镀金的基片上,其结构的相对木稳定性限制了实际应用的可能性．我们利用自组装技术,在金基底表面组装了具有特定末端基团的自组装单分子膜,然后利用LB技术构造偶氮苯衍生物的单分子膜,以期得到稳定而有序的偶氮苯LB膜,且不影响其光化学和电化学活性．本文报道了这种新型偶氮苯自组装一LB组合股的结构表征及其电化学行为．亚实验部分偶…     

Electrochemically deposited organic luminescent films: the effects of deposition parameters on morphologies and luminescent efficiency of films

The electropolymerization behaviors of an electroactive and luminescent compound TCPC as precursor are studied. The resultant electrochemical deposition (ED) films are characterized by cyclic voltammetry (CV), UV-vis, fluorescence spectra, scanning electron microscopy (SEM), and atomic force microscopy (AFM). Under the CV mode with potential range of -0.5 to 0.85 V vs Ag/Ag(+), the coupling reactions between the carbazole units of TCPC are very efficient, while the fluorescent trifluorene segment in TCPC is chemically inert in this potential range, which results in a highly fluorescent film formation on indium tin oxide (ITO) electrode. The deposition parameters for preparing the TCPC-based ED films are optimized, and the best ED film gives the fluorescence efficiency of 45.5% with surface roughness of 2.8 nm and morphologic stability as heating to 180 degrees C. The light-emitting devices (LEDs) using this ED film as light emitting layer with structure ITO/ED film (approximately 100 nm)/Ba/Al achieve maximum luminescence and external quantum efficiency of 4224 cd/m(2) at 17 V and 0.72% at 11.5 V, respectively, which are better than the device using TCPC spin-coating films as emitting layer. The technique provides a facile route toward a patternable luminescent film and device because such luminescent ED films can be manipulatively deposited on the electrified electrode.     

Pd/Mm(富铈稀土)薄膜电极在KOH溶液中的电化学行为

利用磁控溅射法制备了Pd/Mm(Mischmetal)混合稀土薄膜,采用X射线衍射、AFM及循环伏安和交流阻抗谱等电化学测试技术研究了Pd/Mm稀土薄膜的晶体结构、表面形貌及其在KOH溶液中的电化学行为.结果表明,Pd/Mm薄膜表面的Pd层由纳米级的孤岛状颗粒构成,颗粒大小为100～200 nm.循环伏安法研究表明,氢的电化学氧化和还原均通过表面Pd金属层进行.Pd/Mm稀土薄膜电极的交流阻抗图由两个容抗弧组成,低频区的容抗弧对应氢在电极中的固态扩散过程,而高频段的容抗弧对应氢在电极表面的电化学还原过程,其中氢在薄膜电极内部的扩散是速率控制步骤.     

Photoluminescence Properties of Two-dimensional Planar Layer and Three-dimensional Island Layer for ZnO Films Grown Using MOCVD

IntroductionOver the past few years, wide band gap semicon-ductors have attracted considerable attention because oftheir high commercial demand for the preparation ofblue and UV light emitters. The most promising amongall the known materials used for this…     

Electron transfer studies on cholesterol LB films assembled on thiophenol and 2-naphthalenethiol self-assembled monolayers

We have formed the cholesterol monolayer and multilayer LB films on the self-assembled monolayers of 2-naphthalenethiol (2-NT) and thiophenol (TP) and studied the electrochemical barrier properties of these composite films using cyclic voltammetry and electrochemical impedance spectroscopy. We have also characterized the cholesterol monolayer film using grazing angle FTIR, scanning tunneling microscopy (STM) and atomic force microscopy (AFM). Cholesterol has a long hydrophobic steroid chain, which makes it a suitable candidate to assemble on the hydrophobic surfaces. We find that the highly hydrophobic surface formed by the self-assembled monolayers (SAM) of 2-NT and TP act as effective platforms for the fabrication of cholesterol monolayer and multilayer films. The STM studies show that the cholesterol monolayer films on 2-NT form striped patterns with a separation of 1.0 nm between them. The area per cholesterol molecule is observed to be 0.64 nm2 with a tilt angle of about 28.96 degrees from the surface normal. The electrochemical studies show a large increase in charge transfer resistance and lowering of interfacial capacitance due to the formation of the LB film of cholesterol. We have compared the behavior of this system with that of cholesterol monolayer and multilayers formed on the self-assembled monolayer of thiophenol.     

聚(ε-己内酯)薄膜结晶形貌及分子取向研究

用匀胶机通过溶液铸膜方法在硅片和铝箔基板上分别制备具有不同厚度的聚(ε-己内酯)(PCL)薄膜. 通过原子力显微镜(AFM)和偏光衰减全反射傅里叶红外光谱(ATR-FTIR)对薄膜中PCL的结晶形貌、 片晶生长方式及分子链取向进行了研究. AFM结果表明, 在200 nm或更厚的薄膜中, PCL主要以侧立(edge-on)片晶的方式生长; 对于厚度小于200 nm的薄膜, PCL片晶更倾向于以平躺(flat-on)的方式生长. 这种片晶生长方式的改变在硅片和铝箔基板上都表现出同样的倾向. 此外, 在15 nm或更薄的薄膜中, PCL结晶由通常的球晶结构变为树枝状晶体. 偏光ATR-FTIR结果表明, 当膜厚小于200 nm时, 薄膜结晶中PCL分子链沿垂直于基板表面方向取向, 并且膜越薄, 取向程度越高, 与AFM的观测结果一致.     

Nanoscale patterning of flat carbon surfaces by scanning probe lithography and electrochemistry

We report the formation of carbon surfaces patterned at the nanoscale with organic functionalities. Thin (<10 nm) films are covalently grafted to the surface via the electrochemical reduction of aryl diazonium salts. Areas of the film are removed with an AFM tip, and a second modifier is electrochemically grafted to the exposed surface. The pattern can incorporate different chemical functionalities, or alternatively topographical patterns can be assembled, where the same functionality is present throughout the pattern.     

Effect of molecular weight on the exponential growth and morphology of hyaluronan/chitosan multilayers: a surface plasmon resonance spectroscopy and atomic force microscopy investigation

The layer-by-layer growth of multilayer assemblies of two polysaccharides, the polyanion hyaluronan (HA) and the polycation chitosan (CH), was investigated using atomic force microscopy (AFM) and surface plasmon resonance (SPR) spectroscopy, with primary emphasis on the effect of the polysaccharide molecular weights on the film thickness and surface morphology. The HA/CH multilayers exhibit an exponential increase of the optical film thickness with the number of deposited bilayers. We show that the multilayer thickness at a given stage depends on the size of both CH, the diffusing polyelectrolyte, and HA, the non-diffusing species. Assemblies (12 bilayers) of high molecular weight polysaccharides (HA, 360,000; CH, 160,000) were twice as thick (approximately 900 nm vs approximately 450 nm) as those obtained with low molecular weight polymers (HA, 30,000; CH, 31,000), as assessed by AFM scratch tests. The exponential growth rate is the same for the high and low molecular weight pairs; the larger film thicknesses observed by SPR and by AFM arising from an earlier onset of the steep exponential growth phase in the case of the high molecular weight pair. In all cases, isolated islets form during the deposition of the first CH layer onto the underlying HA. Upon further film growth, individual islets coalesce into larger vermiculate features. The transition from distinct islands to vermiculate structures depends on the molecular weights of the polysaccharides and the lower molecular weight construct presents larger worm-like surface domains than the high molecular weight pair.