DNA-embedded Au/Ag core-shell nanoparticles

Here, we synthesized highly stable DNA-embedded Au/Ag core-shell nanoparticles (NPs) by a straightforward silver-staining of DNA-modified Au nanoparticles (AuNPs); unlike conventional DNA-surface modified NPs that present particle stability issues, DNA-embedded core-shell NPs offer an extraordinary stability with nanoscale controllability of silver shell thickness; these DNA-embedded core-shell NPs show excellent biorecognition properties and Ag shell-thickness-based optical properties, distinctively different from those of a mixture of AuNPs and AgNPs or Ag/Au alloy nanoparticles.     

Differential SERS activity of gold and silver nanostructures enabled by adsorbed poly(vinylpyrrolidone)

We report that poly(vinylpyrrolidone) (PVP), a common stabilizer of colloidal dispersions of noble metal nanostructures, has a dramatic effect on their surface-enhanced Raman scattering (SERS) activity and enables highly selective SERS detection of analytes of various type and charge. Nanostructures studied include PVP-stabilized Au-Ag nanoshells synthesized by galvanic exchange reaction of citrate-reduced Ag nanoparticles (NPs), as well as solid citrate-reduced Ag and Au NPs, both before and after stabilization with PVP. All nanostructures were characterized in terms of their size, surface plasmon resonance wavelength, surface charge, and chemical composition. While the SERS activities of the parent citrate-reduced Ag and Au NPs are similar for rhodamine 6G (R6G) and 1,2-bis(4-pyridyl)ethylene (BPE) at various pH values, PVP-stabilized nanostructures demonstrate large differences in SERS enhancement factors (EFs) between these analytes depending on their chemical nature and protonation state. At pH values higher than BPE's pK(a2) of 5.65, where the analyte is largely unprotonated, the PVP-coated Au-Ag nanoshells showed a high SERS EF of >10(8). In contrast, SERS EFs were 10(3)- to 10(5)-fold lower for the protonated form of BPE at lower pH values, or for the usually highly SERS-active cationic R6G. The differential SERS activity of PVP-stabilized nanostructures is a result of discriminatory binding of analytes within-adsorbed PVP monolayer and a subsequent increase of analyte concentration at the nanostructure surface. Our experimental and theoretical quantum chemical calculations show that BPE binding with PVP-stabilized Au-Ag nanoshells is stronger when the analyte is in its unprotonated form as compared to its cationic, protonated form at a lower pH.     

Combining optical lithography with rapid microwave heating for the selective growth of Au/Ag bimetallic core/shell structures on patterned silicon wafers

We demonstrate a novel approach for the production of patterned films of nanometer-sized Au/Ag bimetallic core/shell nanoparticles (NPs) on silicon wafers. In this approach, we first self-assembled monodisperse Au NPs, through specific Au...NH(2) interactions, onto a silicon substrate whose surface had been modified with a pattern of 3-aminopropyltrimethoxysilane (APTMS) groups to form a sandwich structure having the form Au NPs/APTMS/SiO(2). These Au NPs then served as seeds for growing the Au/Ag bimetallic core/shell NPs: we reduced silver ions to Ag metal on the surface of Au seeds under rapid microwave heating in the presence of sodium citrate. Energy-dispersive X-ray analysis confirmed that the Au/Ag bimetallic core/shell NPs grew selectively on the regions of the surface of the silicon wafer that had been patterned with the Au seeds. Scanning electron microscopy images revealed that we could synthesize well-scattered, high-density (>82%) thin films of Au/Ag bimetallic core/shell NPs through the use of this novel strategy. The patterned structures that can be formed are simple to produce, easily controllable, and highly reproducible; we believe that this approach will be useful for further studies of nanodevices and their properties.     

Spectrophotometric and physicochemical investigations of Congo,alizarin red dyes and BSA interactions with Au,Ag and Au/Ag mix nanoparticles,and their antimicrobial activities

Individual and mix metal nanoparticles of Ag and Au have been prepared by the reducing method where citrate was used as reducing/stabilizing agent. The prepared NPs were characterized with UV/Visible and transmission electron microscopic (TEM) tools. The characteristic peak in UV/Visible at 525, 444 and 531 nm for Au, Ag and Ag/Au mix NPs respectively, gave primary confirmation of prepared NPs. TEM analysis showed the size of nanoparticles as 44.04, 19.78 and 30.93 nm for Ag, Au and Ag/Au mix NPs respectively. Congo and alizarin red dye interactions studies have been performed with prepared NPs to see the removal of the pollutants from water. Congo dye has shown weaker interaction as compared to alizarin due to structural symmetry. Amongst all, the AgNPs have shown maximum 67% and 75% interactions with Congo red and alizarin respectively due to high negative charges on the surface. The Au, Ag and Au/Ag mix NPs have shown stronger interaction with bovine serum albumin (BSA) protein up to 51, 59, 55% respectively, estimated through UV/Vis and physicochemical analysis. The biological evaluations of the prepared NPs have shown their antibacterial activity against Gram + ve and –ve species showing up to 9 cm zone of inhibition. The BSA interaction and antibacterial activity of NPs reveal the importance of NPs in medicinal field.     

Multiple plasmonic effect on photocurrent generation of metal‐loaded titanium dioxide composite/dye films on gold grating surface

We demonstrate the multiple plasmonic effect on the photocurrent properties of photoanodes containing Ag or Au nanoparticles (NPs) loaded onto titanium dioxide film (Ag–TiO₂ or Au–TiO₂) on Au grating surfaces. Ag–TiO₂ or Au–TiO₂ nanocomposite particles are prepared by a flame spray pyrolysis route. The structures and morphologies of the prepared products are characterized by high‐resolution transmission electron microscopy. The Ag–TiO₂ or Au–TiO₂ composite NPs are deposited by spin coating onto the Au grating surfaces. The photoanode electrode is a layered structure of blu‐ray disc‐recordable grating substrate/Au/Ag (or Au)–TiO₂/dye/electrolyte/indium‐tin oxide. The plasmonic effect is induced when Ag or Au NPs are located within the propagating surface plasmon (SP) field on the Au grating surface. The short‐circuit photocurrent is increased by exciting the grating‐coupled propagating SP on the Au gratings and is further enhanced by positioning the Ag or Au NPs within the grating‐coupled SP field. Copyright © 2014 John Wiley & Sons, Ltd.     

Facile <Emphasis Type="Italic">Aglaia elaeagnoidea</Emphasis> Mediated Synthesis of Silver and Gold Nanoparticles: Antioxidant and Catalysis Properties

A facile and green route for the synthesis of metallic nanoparticles is of significant intriguing, as it provides simple, rapid, clean, nontoxic, easily available, energy-efficient, cost-effective fabrication method. We reported environmentally benign and unexplored plant Aglaia elaeagnoidea flower extract for the synthesis of spherical and crystalline silver (Ag) and gold (Au) nanoparticles with an excellent robustness against agglomeration. The resultant nanoparticles were characterized using UV–Vis spec., FTIR, XRD, FESEM, EDAX, and TEM techniques. The uniqueness of our method lies in fast synthesis (10 min for Ag NPs) and ultra rapid homogeneous and heterogeneous complete degradation of Methylene Blue and Congo Red within few seconds using the synthesized Ag and Au NPs as the catalyst, respectively. Whereas more than 90% conversion of 4-Nitrophenol to 4-Aminophenol within few minutes for homogenous and few seconds for heterogeneous method using Ag and Au NPs were obtained. Hence, the results of this study demonstrate the possible application of biosynthesized of Ag and Au NPs as nanocatalyst in waste water treatment.     

Synthesis of hollow and nanoporous gold/platinum alloy nanoparticles and their electrocatalytic activity for formic acid oxidation

In this work, hollow Au/Pt alloy nanoparticles (NPs) with porous surfaces were synthesized in a two-step procedure. In the first step, tri-component Ag/Au/Pt alloy NPs were synthesized through the galvanic replacement reaction between Ag NPs and aqueous solutions containing a mixture of HAuCl₄ and H₂PtCl₄. In the second step, the Ag component was selectively dealloyed with nitric acid (HNO₃), resulting in hollow di-component Au/Pt alloy NPs with a porous surface morphology. The atomic ratio of Au to Pt in the NPs was easily tunable by controlling the molar ratio of the precursor solution (HAuCl₄ and H₂PtCl₆). Hollow, porous Au/Pt alloy NPs showed enhanced catalytic activity toward formic acid electrooxidation compared to the analogous pure Pt NPs. This improved activity can be attributable to the suppression of CO poisoning via the “ensemble” effect.     

Analytical separation of Au/Ag core/shell nanoparticles by capillary electrophoresis

This paper demonstrates that capillary electrophoresis (CE) can be employed for characterizing the sizes of a series of Au/Ag core/shell nanoparticles (NPs). We effected the CE separation of Au/Ag core/shell NPs using a mixed buffer of sodium dodecyl sulphate (SDS) (40 mM) and 3-(cyclohexylamino)propanesulfonic acid (10 mM) at pH 9.7 and an applied voltage of 20 kV. A linear relationship (R(2)>0.99) existed between the electrophoretic mobilities and the sizes of the Au/Ag core/shell NPs within the diameter range from 25 to 90 nm; the relative standard deviations of these electrophoretic mobilities were <0.9%. From the good correlation between the results obtained by CE and those provided by scanning electron microscopy, we confirmed that this CE method is a valid one for characterizing the sizes of Au/Ag core/shell NP samples. In addition, when the Au/Ag core/shell NPs were separated through CE and detected using an on-line photodiode array detector, this approach allowed the chemical characterization of the NP species. This CE approach should allow the rapid and cost-effective characterization of a number of future nanomaterials.     

Silver overlayer-modified surface-enhanced Raman scattering-active gold substrates for potential applications in trace detection of biochemical species

Because Ag and Au nanoparticles (NPs) possess well-defined localized surface plasmon resonance (LSPR) they are popularly employed in the studies of surface-enhanced Raman scattering (SERS). As shown in the literature and in our previous studies, the advantage of SERS-active Ag NPs is their higher SERS enhancement over Au NPs. On the other hand, the disadvantage of SERS-active Ag NPs compared to Au NPs is their serious decay of SERS enhancement in ambient laboratory air. In this work, we develop a new strategy for preparing highly SERS-active Ag NPs deposited on a roughened Au substrate. This strategy is derived from the modification of electrochemical underpotential deposition (UPD) of metals. The coverage of Ag NPs on the roughened Au substrate can be as high as 0.95. Experimental results indicate that the SERS of Rhodamine 6G (R6G) observed on this developed substrate exhibits a higher intensity by ca. 50-fold of magnitude, as compared with that of R6G observed on the substrate without the deposition of Ag NPs. The limit of detection (LOD) for R6G measured on this substrate is markedly reduced to 2 × 10⁻¹⁵ M. Moreover, aging of SERS effect observed on this developed substrate is significantly depressed, as compared with that observed on a generally prepared SERS-active Ag substrate. These aging tests were performed in an atmosphere of 50% relative humidity (RH) and 20% (v/v) O₂ at 30 °C for 60 day. Also, the developed SERS-active substrate enables it practically applicable in the trace detection of monosodium urate (MSU)-containing solution in gouty arthritis without a further purification process.     

Influence of Metal Nanoparticles on the Electrocatalytic Oxidation of Glucose by Poly(NiIIteta) Modified Electrodes

Conductive polymeric [Ni^II(teta)]²⁺ (teta=C‐meso‐5,5,7,12,12,14‐hexamethyl‐1,4,8,11‐tetra‐azacyclotetradecane) films (poly(Ni)) have been deposited on the surface of glassy carbon (GC), Nafion (Nf) modified GC (GC/Nf) and Nf stabilized Ag and Au nanoparticles (NPs) modified GC (GC/Ag‐Nf and GC/Au‐Nf) electrodes. The cyclic voltammogram of the resulting electrodes, show a well defined redox peak due to oxidation and reduction of poly(Ni) system in 0.1 M NaOH. They show electrocatalytic activity towards the oxidation of glucose. AFM studies reveal the formation of poly(Ni) film on the modified electrodes. Presence of metal NPs increases electron transfer rate and electrocatalytic oxidation current by improving the communication within the Nf and poly(Ni) films. In the presence of metal NPs, 4 fold increase in current for glucose oxidation was observed.