A CASPT2//CASSCF study of the quartet excited state \tilde{a}^{4}A^{\prime\prime} of the HCNN radical

Complete active space self-consistent field and second-order multiconfigurational perturbation theory methods have been performed to investigate the quartet excited state ${\tilde{a}}^{4}{A^{\prime\prime}}$ potential energy surface of HCNN radical. Two located minima with respective cis and trans structures could easily dissociate to CH $({\tilde{a}}^{4}\Sigma^{-})$ and $N_{2} ({\tilde{X}}^{1}\Sigma_{\rm g}^{+})$ products with similar barrier of about 16.0 kcal/mol. In addition, four minimum energy crossing points on a surface of intersection between ${\tilde{a}}^{4}A^{\prime\prime}$ and X ( $X={\tilde{X}}^{2}A^{\prime\prime}$ and ${\tilde{A}}^{2}A^{\prime}$ ) states are located near to the minima. However, the intersystem crossing ${\tilde{a}}^{4}A^{\prime\prime} \rightarrow X$ is weak due to the vanishingly small spin–orbit interactions. It further indicates that the direct dissociation on the ${\tilde{a}}^{4}{A^{\prime\prime}}$ state is more favored. This information combined with the comparison with isoelectronic HCCO provides an indirect support to the recent experimental proposal of photodissociation mechanism of HCNN.     

Thermochemistry of hydroxymethylphenol isomers

The standard (p° = 0.1 MPa) molar enthalpies of formation in the crystalline state of the 2-, 3- and 4-hydroxymethylphenols, $ {{\Updelta}}_{\text{f}} H_{\text{m}}^{\text{o}} ( {\text{cr)}} = \, - ( 3 7 7. 7 \pm 1. 4)\,{\text{kJ}}\,{\text{mol}}^{ - 1} $ , $ {{\Updelta}}_{\text{f}} H_{\text{m}}^{\text{o}} ( {\text{cr) }} = - (383.0 \pm 1.4) \, \,{\text{kJ}}\,{\text{mol}}^{ - 1} $ and $ {{\Updelta}}_{\text{f}} H_{\text{m}}^{\text{o}} ( {\text{cr)}} = - (382.7 \pm 1.4)\,{\text{kJ}}\,{\text{mol}}^{ - 1} $ , respectively, were derived from the standard molar energies of combustion, in oxygen, to yield CO₂(g) and H₂O(l), at T = 298.15 K, measured by static bomb combustion calorimetry. The Knudsen mass-loss effusion technique was used to measure the dependence of the vapour pressure of the solid isomers of hydroxymethylphenol with the temperature, from which the standard molar enthalpies of sublimation were derived using the Clausius–Clapeyron equation. The results were as follows: $ \Updelta_{\rm cr}^{\rm g} H_{\rm m}^{\rm o} = (99.5 \pm 1.5)\,{\text{kJ}}\,{\text{mol}}^{ - 1} $ , $ \Updelta_{\rm cr}^{\rm g} H_{\rm m}^{\rm o} = (116.0 \pm 3.7) \,{\text{kJ}}\,{\text{mol}}^{ - 1} $ and $ \Updelta_{\rm cr}^{\rm g} H_{\rm m}^{\rm o} = (129.3 \pm 4.7)\,{\text{ kJ mol}}^{ - 1} $ , for 2-, 3- and 4-hydroxymethylphenol, respectively. From these values, the standard molar enthalpies of formation of the title compounds in their gaseous phases, at T = 298.15 K, were derived and interpreted in terms of molecular structure. Moreover, using estimated values for the heat capacity differences between the gas and the crystal phases, the standard (p° = 0.1 MPa) molar enthalpies, entropies and Gibbs energies of sublimation, at T = 298.15 K, were derived for the three hydroxymethylphenols.     

Density functional theoretical study of A series of pentazolide compounds \hbox{A}_{\it n}(\hbox{N}_5)_{\rm 6-{\it n}}^{\it q} (A = B, Al, Si, P, and S; n = 1–3; q = +1, 0, −1, −2, and −3)

The structure and the stability of pentazolide compounds $\hbox{A}_{\it n}(\hbox{N}_5)_{\rm 6-{\it n}}^{\it q}$ (A = B, Al, Si, P, and S; n= 1–3; q = +1, 0, ?1, ?2, and ?3), as high energy-density materials (HEDMs), have been investigated at the B3LYP/6-311+G* level of theory. The natural bond orbital analysis shows that the charge transfer plays an important role when the $\hbox{A}_{\it n}(\hbox{N}_5)_{\rm 6-{\it n}}^{\it q}$ species are decomposed to $\hbox{A}_{\it n}(\hbox{N}_5)_{\rm 5-{\it n}}\hbox{N}_3^{\it q}$ and N₂. The more negative charges are transferred from the N₂ molecule after breaking the N₅ ring, the more stable the systems are with respect to the decomposition. Moreover, the conclusion can be drawn that ${\hbox{Al}(\hbox{N}_5)_5^{2-}}$ and ${\hbox{Al}_2(\hbox{N}_5)_4^{2-}}$ are predicted to be suitable as potential HEDMs.     

Volumetric and Viscometric Studies in Binary Liquid Mixtures of 2-Methyl-2-propanol with Some Ketones at Different Temperatures

Densities, ??, and viscosities, ??, of binary mixtures of 2-methyl-2-propanol with acetone (AC), ethyl methyl ketone (EMK) and acetophenone (AP), including those of the pure liquids, were measured over the entire composition range at 298.15, 303.15 and 308.15?K. From these experimental data, the excess molar volume $V_{\mathrm{m}}^{\mathrm{E}}$ , deviation in viscosity ????, partial and apparent molar volumes ( $\overline{V}_{\mathrm{m},1}^{\,\circ }$ , $\overline{V}_{\mathrm{m},2}^{\,\circ }$ , $\overline{V}_{\phi ,1}^{\,\circ}$ and $\overline{V}_{\phi,2}^{\,\circ} $ ), and their excess values ( $\overline{V}_{\mathrm{m},1}^{\,\circ \mathrm{E}}$ , $\overline{V}_{\mathrm{m,2}}^{\,\circ \mathrm{ E}}$ , $\overline {V}_{\phi \mathrm{,1}}^{\,\circ \mathrm{ E}}$ and $\overline{V}_{\phi \mathrm{,2}}^{\,\circ \mathrm{ E}}$ ) of the components at infinite dilution were calculated. The interaction between the component molecules follows the order of AP > AC > EMK.     

A mathematical approach to chemical equilibrium theory for gaseous systems—III: \hbox {Q}_\mathrm{p}, \hbox {Q}_\mathrm{c}, and \hbox {Q}_{\mathrm{x}}

The reaction quotient Q can be expressed in partial pressures as $\hbox {Q}_\mathrm{P}$ or in mole fractions as $\hbox {Q}_{\mathrm{x}}$ . $\hbox {Q}_\mathrm{P}$ is ostensibly more useful than $\hbox {Q}_{\mathrm{x}}$ because the related $\hbox {K}_{\mathrm{x}}$ is a constant for a chemical equilibrium in which T and P are kept constant while $\hbox {K}_{\mathrm{P}}$ is an equilibrium constant under more general conditions in which only T is constant. However, as demonstrated in this work, $\hbox {Q}_{\mathrm{x}}$ is in fact more important both theoretically and technically. The relationships between $\hbox {Q}_{\mathrm{x}}$ , $\hbox {Q}_\mathrm{P}$ , and $\hbox {Q}_{\mathrm{C}}$ are discussed. Four examples of applications are given in detail.     

Thermodynamic study of metal corrosion and inhibitor adsorption processes in copper/N-1-naphthylethylenediamine dihydrochloride monomethanolate/nitric acid system: part 2

N-1-Naphthylethylenediamine dihydrochloride monomethanolate (N-NEDHME) was tested as a corrosion inhibitor for copper in 2 M HNO₃ solution using the standard gravimetric technique at 303–343 K. N-NEDHME acts as an inhibitor for copper in an acidic medium. Inhibition efficiency increases with increase in concentration of N-NEDHME but decreases with a rise in temperature. Thermodynamic parameters such as adsorption heat ( $ \Updelta H_{\text{ads}}^\circ $ ), adsorption entropy ( $ \Updelta S_{\text{ads}}^\circ $ ) and adsorption free energy ( $ \Updelta G_{\text{ads}}^\circ $ ) were obtained from experimental data of the temperature studies of the inhibition process at five temperatures ranging from 303 to 343 K. Kinetic parameters activation such as $ E_{a} $ , $ \Updelta H_{\text{a}}^\circ $ , $ \Updelta S_{\text{a}}^\circ $ and pre-exponential factors have been calculated and are discussed. Adsorption of N-NEDHME on the copper surface in 2 M HNO₃ follows the Langmuir isotherm model.     

Volumetric Properties of the Nucleoside Thymidine in Aqueous Solution at T = 298.15 K and p = (10 to 100) MPa

Sound speeds have been measured for aqueous solutions of the nucleoside thymidine at T = 298.15 K and at the pressures p = (10, 20, 40, 60, 80, and 100) MPa. The partial molar volumes at infinite dilution, $ V_{2}^{\text{o}} $ , the partial molar isentropic compressions at infinite dilution, $ K_{S,2}^{\text{o}} $ , and the partial molar isothermal compressions at infinite dilution, $ K_{T,2}^{\text{o}} $ $ \{ K_{T,2}^{\text{o}} = - (\partial V_{2}^{\text{o}} /\partial p)_{T} \} $ , have been derived from the sound speeds at elevated pressures using methods described in our previous work. The $ V_{2}^{\text{o}} $ and $ K_{T,2}^{\text{o}} $ results were rationalized in terms of the likely interactions between thymidine and the aqueous solvent. The $ V_{2}^{\text{o}} $ results were also compared with those calculated using the revised Helgeson–Kirkham–Flowers (HKF) equation of state.     

Computer-aided cooling curve thermal analysis of near eutectic Al–Si–Cu–Fe alloy

The effects of bismuth (Bi), antimony (Sb) and strontium (Sr) additions on the characteristic parameters of the evolution of aluminium dendrites in a near eutectic Al–11.3Si–2Cu–0.4Fe alloy during solidification at different cooling rates (0.6–2 °C) were investigated by computer-aided cooling curve thermal analysis (CA-CCTA). Nucleation temperature ( $ T_{\text{N}}^{{\alpha {\text{ - Al}}}} $ ) is defined with a new approach based on second derivative cooling curve. The results showed that $ T_{\text{N}}^{{\alpha {\text{ - Al}}}} $ increased with increasing cooling rate but both the growth temperature ( $ T_{\text{G}}^{{\alpha {\text{ - Al}}}} $ ) and the coherency temperature (T _DCP) decreased. Increase in the temperature difference for dendrite coherency ( $ T_{\text{N}}^{{\alpha {\text{ - Al}}}} - T_{\text{DCP}} $ ) with increasing cooling rate indicate a wider range of temperature before the dendrite can impinge on each other and higher fraction solid ( $ f_{\text{S}}^{\text{DCP}} $ ). Additions of Bi, Sb and Sr to the base alloy produced only a minor effect on $ T_{\text{N}}^{{\alpha {\text{ - Al}}}} $ . Additions of Bi and Sb resulted in an increase in fraction solid and an increase of 30 % in the value of $ T_{\text{N}}^{{\alpha {\text{ - Al}}}} \, - \,T_{\text{G}}^{{\alpha {\text{ - Al}}}} $ to almost 13 °C.     

Thermochemical Properties of n-Undecylammonium Bromide Monohydrate C11H28BrNO(s)

The crystal structure of n-undecylammonium bromide monohydrate was determined by X-ray crystallography. The crystal system of the compound is monoclinic, and the space group is P2₁/c. Molar enthalpies of dissolution of the compound at different concentrations m/(mol·kg^?1) were measured with an isoperibol solution–reaction calorimeter at T = 298.15 K. According to the Pitzer’s electrolyte solution model, the molar enthalpy of dissolution of the compound at infinite dilution ( $ \Updelta_{\text{sol}} H_{\text{m}}^{\infty } $ ) and Pitzer parameters ( $ \beta_{\text{MX}}^{(0)L} $ and $ \beta_{\text{MX}}^{(1)L} $ ) were obtained. Values of the apparent relative molar enthalpies ( $ {}^{\Upphi }L $ ) of the title compound and relative partial molar enthalpies ( $ \bar{L}_{2} $ and $ \bar{L}_{1} $ ) of the solute and the solvent at different concentrations were derived from experimental values of the enthalpies of dissolution.     

Transport of Water by Group 1 and 2 Ions with t-Butyl Alcohol as Reference Substance: Comparison with Raffinose and Dioxan

Measurement of the transport of water with respect to the second solvent component in a binary aqueous mixture gives the Washburn number, $ w_{\text{W}} = (n_{\text{W}} )_{ + } t_{ + } - (n_{\text{W}} )_{ - } t_{ - } $ , in a transport number determination, where the ions move in opposite directions, and give the Erdey–Grúz number, $ \Upsigma n_{\text{W}} = (n_{\text{W}} )_{ + } + (n_{\text{W}} )_{ - } $ , in a diffusion experiment, where the ions move in the same direction. Here n _W and t are the number of water molecules and transport number, respectively, of the anion or cation. Combination of the results of these two experiments allows unambiguous determination of values for the solvent transport numbers, $ n_{\text{W}} $ , of the individual ions. While the values of $ n_{\text{W}} $ depend on the cosolvent, at high dilutions of the second component the highest value of $ n_{\text{W}} $ found, $ N_{\text{W}} $ , should approach the number of water molecules transported by the ion in pure water, $ N_{\text{W}}^{0} $ . New data for alkali-metal, alkaline-earth metal, hydrogen and halide ions in dilute mixtures of t-butyl alcohol with water are presented. Values of $ N_{\text{W}} $ rounded to whole numbers thus found are: 12 (Li⁺), 10 (Na⁺), 6 (K⁺), 5 (Rb⁺), 5 (Cs⁺), 1 (H⁺), 13 (Ca²⁺), 16 (Sr²⁺) and 15 (Ba²⁺). Factors influencing preferential solvation are briefly discussed. Detailed recalculations of $ n_{\text{W}} $ in the raffinose–water system from literature data also allows resolution of a problem with the Onsager Relations.     

Thermodynamic Analysis of Homologous α-Amino Acids in Aqueous Potassium Fluoride Solutions at Different Temperatures

Partial molal volumes ( $V_{\phi} ^{0}$ ) and partial molal compressibilities ( $K_{\phi} ^{0}$ ) for glycine, L-alanine, L-valine and L-leucine in aqueous potassium fluoride solutions (0.1 to 0.5?mol?kg^?1) have been measured at T=(303.15,308.15,313.15 and 318.15) K from precise density and ultrasonic speed measurements. Using these data, Hepler coefficients ( $\partial^{2}V_{\phi} ^{0}/\partial T^{2}$ ), transfer volumes ( $\Delta V_{\phi} ^{0}$ ), transfer compressibilities ( $\Delta K_{\phi} ^{0}$ ) and hydration number (n _H) have been calculated. Pair and triplet interaction coefficients have been obtained from the transfer parameters. The values of $V_{\phi} ^{0}$ and $K_{\phi} ^{0}$ vary linearly with increasing number of carbon atoms in the alkyl chain of the amino acids. The contributions of charged end groups ( $\mathrm{NH}_{3}^{+}$ , COO^?), CH₂ group and other alkyl chains of the amino acids have also been estimated. The results are discussed in terms of the solute?Ccosolute interactions and the dehydration effect of potassium fluoride on the amino acids.     

Molecular Interactions in 1-Ethyl-3-Methylimidazolim Tetrafluoroborate + Amide Mixtures: Excess Molar Volumes, Excess Isentropic Compressibilities and Excess Molar Enthalpies

The densities, ρ ₁₂, and speeds of sound, u ₁₂, of 1-ethyl-3-methylimidazolium tetrafluoroborate (1) + N-methylformamide or N,N-dimethylformamide (2) binary mixtures at (293.15. 298.15. 303.15, 308.15 K), and excess molar enthalpies, $ H_{12}^{\text{E}} $ H 12 E , of the same mixtures at 298.15 K have been measured over the entire mole fraction range using a density and sound analyzer (Anton Paar DSA-5000) and a 2-drop microcalorimeter, respectively. Excess molar volume, $ V_{12}^{\text{E}} $ V 12 E , and excess isentropic compressibility, $ \left( {\kappa_{S}^{\text{E}} } \right)_{12} $ ( κ S E ) 12 , values have been calculated by utilizing the measured density and speed of sound data. The observed data have been analyzed in terms of: (i) Graph theory and (ii) the Prigogine–Flory–Patterson theory. Analysis of the $ V_{12}^{\text{E}} $ V 12 E data in terms of Graph theory suggest that: (i) in pure 1-ethyl-3-methylimidazolium tetrafluoroborate, the tetrafluoroborate anion is positioned over the imidazoliun ring and there are interactions between the hydrogen atom of (C–H{edge}) and proton of the –CH₃ group (imidazolium ring) with fluorine atoms of tetrafluoroborate anion, and (ii) (1 + 2) mixtures are characterized by ion–dipole interactions to form a 1:1 molecular complex. Further, the $ V_{12}^{\text{E}} $ V 12 E , $ H_{12}^{\text{E}} $ H 12 E and $ \left( {\kappa_{S}^{\text{E}} } \right)_{12} $ ( κ S E ) 12 values determined from Graph theory compare well with their measured experimental data.     

Densities and Volumetric Properties of Butyl Acrylate + 1-Butanol, or +2-Butanol, or +2-Methyl-1-propanol, or +2-Methyl-2-propanol Binary Mixtures at Temperatures from 288.15 to 318.15 K

The densities, ρ, of binary mixtures of butyl acrylate with 1-butanol, 2-butanol, 2-methyl-1-propanol, and 2-methyl-2-propanol, including those of the pure liquids, were measured over the entire composition range at temperatures of (288.15, 293.15, 298.15, 303.15, 308.15, 313.15, and 318.15) K and atmospheric pressure. From the experimental data, the excess molar volume $ V_{\text{m}}^{\text{E}} $ V m E , partial molar volumes $ \overline{V}_{\text{m,1}} $ V ¯ m,1 and $ \overline{V}_{\text{m,2}} $ V ¯ m,2 , and excess partial molar volumes $ \overline{V}_{\text{m,1}}^{\text{E}} $ V ¯ m,1 E and $ \overline{V}_{\text{m,2}}^{\text{E}} $ V ¯ m,2 E , were calculated over the whole composition range as were the partial molar volumes $ \overline{V}_{\text{m,1}}^{^\circ } $ V ¯ m,1 ° and $ \overline{V}_{\text{m,2}}^{^\circ } $ V ¯ m,2 ° , and excess partial molar volumes $ \overline{V}_{\text{m,1}}^{{^\circ {\text{E}}}} $ V ¯ m,1 ° E and $ \overline{V}_{\text{m,2}}^{{^\circ {\text{E}}}} $ V ¯ m,2 ° E , at infinite dilution,. The $ V_{\text{m}}^{\text{E}} $ V m E values were found to be positive over the whole composition range for all the mixtures and at each temperature studied, indicating the presence of weak (non-specific) interactions between butyl acrylate and alkanol molecules. The deviations in $ V_{\text{m}}^{\text{E}} $ V m E values follow the order: 1-butanol < 2-butanol < 2-methyl-1-propanol < 2-methyl-2-propanol. It is observed that the $ V_{\text{m}}^{\text{E}} $ V m E values depend upon the position of alkyl groups in alkanol molecules and the interactions between butyl acrylate and isomeric butanols decrease with increase in the number of alkyl groups at α-carbon atom in the alkanol molecules.     

Synergistic extraction of europium and americium into nitrobenzene by using hydrogen dicarbollylcobaltate and bis(diphenylphosphino)methane dioxide

Extraction of microamounts of europium and americium by a nitrobenzene solution of hydrogen dicarbollylcobaltate (H⁺B^?) in the presence of bis(diphenylphosphino)methane dioxide (DPPMDO, L) has been investigated. The equilibrium data have been explained assuming that the species $ {\text{HL}}^{ + } $ , $ {\text{HL}}_{2}^{ + } $ , $ {\text{ML}}_{2}^{3 + } $ , $ {\text{ML}}_{3}^{3 + } $ and $ {\text{ML}}_{4}^{3 + } $ (M³⁺ = Eu³⁺, Am³⁺) are extracted into the organic phase. The values of extraction and stability constants of the species in nitrobenzene saturated with water have been determined. It was found that the stability constants of the corresponding complexes $ {\text{EuL}}_{n}^{3 + } $ and $ {\text{AmL}}_{n}^{3 + } $ , where n = 2, 3 and L is DPPMDO, in water–saturated nitrobenzene are comparable, whereas in this medium the stability of the cationic species $ {\text{AmL}}_{4}^{3 + } $ (L = DPPMDO) is somewhat higher than that of $ {\text{EuL}}_{4}^{3 + } $ with the same ligand L.     

Spectroscopic Studies on the Thermodynamics of the Complexation of Trivalent Curium with Propionate in the Temperature Range from 20 to 90 °C

The thermodynamics of the stepwise complexation reaction of Cm(III) with propionate was studied by time resolved laser fluorescence spectroscopy (TRLFS) and UV/Vis absorption spectroscopy as a function of the ligand concentration, the ionic strength and temperature (20–90 °C). The molar fractions of the 1:1 and 1:2 complexes were quantified by peak deconvolution of the emission spectra at each temperature, yielding the log₁₀ $ K_{n}^{\prime } $ values. Using the specific ion interaction theory (SIT), the thermodynamic stability constants log₁₀ $ K_{n}^{0} (T) $ were determined. The log₁₀ $ K_{n}^{0} (T) $ values show a distinct increase by 0.15 (n = 1) and 1.0 (n = 2) orders of magnitude in the studied temperature range, respectively. The temperature dependency of the log₁₀ $ K_{n}^{0} (T) $ values is well described by the integrated van’t Hoff equation, assuming a constant enthalpy of reaction and $ \Updelta_{\text{r}} C^\circ_{{p,{\text{m}}}} = 0, $ yielding the thermodynamic standard state $ \left( {\Updelta_{\text{r}} H^\circ_{\text{m}} ,\Updelta_{\text{r}} S^\circ_{\text{m}} ,\Updelta_{\text{r}} G^\circ_{\text{m}} } \right) $ values for the formation of the $ {\text{Cm(Prop)}}_{n}^{3 - n} $ , n = (1, 2) species.     

Chemical Transfer Energies of Some Homologous Amino Acids and the –CH2– Group in Aqueous DMF: Solvent Effect on Hydrophobic Hydration and Three Dimensional Solvent Structure

Standard transfer Gibbs energies, $ \Updelta_{\text{tr}} G^{^\circ } $ , of a series of homologues α-amino acids have been evaluated by determining the solubility of glycine, alanine, amino butyric acid and norvaline gravimetrically at 298.15 K. Standard entropies of transfer, $ \Updelta_{\text{tr}} S^{^\circ } $ , of the amino acids have also been evaluated by extending the solubility measurement to five equidistant temperatures ranging from 288.15 to 308.15 K. The chemical contributions $ \Updelta_{\text{tr,ch}} G^{^\circ } (i) $ of α-amino acids, as obtained by subtracting theoretically computed contributions to $ \Updelta_{\text{tr}} G^{ \circ } $ due to cavity and dipole–dipole interaction effects from the corresponding experimental $ \Updelta_{\text{tr}} G^{ \circ } $ , are indicative of the superimposed effect of increased basicity and dispersion and decreased hydrophobic hydration (hbh) in DMF–water solvent mixtures as compared to those in water, while, in addition, $ T\Updelta_{\text{tr,ch}} S^{^\circ } (i) $ is guided by structural effects. The computed chemical transfer energies of the –CH₂– group, $ \Updelta_{\text{tr,ch}} P^{^\circ } $ (–CH₂–) [P = G or S] as obtained by subtracting the value of lower homologue from that of immediately higher homologue, are found to change with composition indicating involvement of several opposing factors in the calculation of the chemical interactions. The $ \Updelta_{\text{tr,ch}} G^{^\circ } $ (–CH₂–) values are found to be guided by the decreased hydrophobic effect in DMF–water mixtures, and are indicative of the nature of the three dimensional structure of the aquo-organic solvent system around each solute.     

Excess Molar Volumes and Excess Isentropic Compressibilities of o-Toluidine + Tetrahydropyran with Pyridine or Benzene or Toluene Ternary Mixtures at 298.15, 303.15 and 308.15 K

The densities, ρ ₁₂₃, and speeds of sound, u ₁₂₃, of ternary o-toluidine (OT, 1) + tetrahydropyran (THP, 2) + pyridine (Py) or benzene or toluene (3) mixtures have been measured as a function of composition at 298.15, 303.15 and 308.15 K. Values of the excess molar volumes, $ V_{123}^{\text{E}} , $ and excess isentropic compressibilities, $ (\kappa_{\text{S}}^{\text{E}} )_{123} , $ of the studied mixtures have been determined by employing the measured experimental data. The observed thermodynamic properties were fitted with the Redlich–Kister equation to determine adjustable ternary parameters and standard deviations. The $ V_{123}^{\text{E}} $ and $ (\kappa_{\text{S}}^{\text{E}} )_{123} $ values were also analyzed in terms of Graph theory. It was observed that Graph theory correctly predicts the sign as well as magnitude of $ V_{123}^{\text{E}} $ and $ (\kappa_{\text{S}}^{\text{E}} )_{123} $ values of the investigated mixtures. Analysis of the data suggests strong interactions and a more close packed arrangement in OT (1) + THP (2) + Py (3) mixtures as compared to those of the OT (1) + THP (2) + benzene (3) or toluene (3) mixtures. This may be due to the presence of a nitrogen atom in Py which results in stronger interactions for the OT:THP molecular entity as compared to those with benzene or toluene.     

Adsorption and Micellization Behavior of Cationic Surfactants (Gemini and Conventional)—Amphiphilic Drug Systems

In the present work, the behavior of mixed drug–surfactant systems has been studied by surface tension measurements. The drug used in this work is adiphenine hydrochloride (ADP) and the surfactants are of m-s-m type geminis, i.e., alkanediyl-α,ω-bis(dimethylalkylammonium bromide), with m = (14, 16), s = (4, 5, 6), and conventional alkyltrimethylammonium bromides (CTAB, TTAB). The excess surface concentration (Γ _max ) increases and the minimum head group area at the air/water interface (A _min) decreases with increasing concentration of surfactant in the drug solution. Both the critical micelle concentration (cmc) and ideal cmc (cmc*) values decrease with mole fraction of surfactants. Also, the cmc values are lower than cmc*, indicating attractive interactions are present in the mixed micelles. The mole fractions of surfactant in the micelles $ \left( {X_{1}^{m} } \right) $ and monolayers $ \left( {X_{1}^{\sigma } } \right) $ , as well as the respective interaction parameters ( $ \beta^{m} $ , $ \beta^{\sigma } $ ), indicate that monolayer formation is easier than micelle formation due to the rigid hydrophobic part of the drug.     

Effect of size of tetraalkylammonium counterions on the temperature dependent micellization of AOT in aqueous medium

Different tetraalkylammonium, viz. N⁺(CH₃)₄, N⁺(C₂H₅)₄, N⁺(C₃H₇)₄, N⁺(C₄H₉)₄ along with simple ammonium salts of bis (2-ethylhexyl) sulfosuccinic acid have been prepared by ion-exchange technique. The critical micelle concentration of surfactants with varied counterions have been determined by measuring surface tension and conductivity within the temperature range 283–313 K. Counterion ionization constant, α, and thermodynamic parameters for micellization process viz., $\Delta G_m^{\text{0}} $ , $\Delta H_m^{\text{0}} $ , and $\Delta S_m^{\text{0}} $ and also the surface parameters, Γ_max and A_min, in aqueous solution have been determined. Large negative $\Delta G_m^{\text{0}} $ of micellization for all the above counterions supports the spontaneity of micellization. The value of standard free energy, $\Delta G_m^{\text{0}} $ , for different counterions followed the order $${\text{N}}^{\text{ + }} \left( {{\text{CH}}_{\text{3}} } \right)_4 >{\text{NH}}_{\text{4}}^{\text{ + }} >{\text{Na}}^{\text{ + }} >{\text{N}}^{\text{ + }} \left( {{\text{C}}_{\text{2}} {\text{H}}_5 } \right)_{\text{4}} {\text{ $>$ N}}^{\text{ + }} \left( {{\text{C}}_{\text{3}} {\text{H}}_{\text{7}} } \right)_4 >{\text{N}}^{\text{ + }} \left( {{\text{C}}_{\text{4}} {\text{H}}_{\text{9}} } \right)_4 $$ , at a given temperature. This result can be well explained in terms of bulkiness and nature of hydration of the counterion together with hydrophobic and electrostatic interactions.     

Thermal analysis, phase transitions and molecular reorientations in [Sr(OS(CH3)2)6](ClO4)2

Thermal analysis (TG/DTG/QMS), performed for [Sr(OS(CH₃)₂)₆](ClO₄)₂ in a flow of argon and in temperature range of 295–585 K, indicated that the compound is completely stable up to ca. 363 K, and next starts to decompose slowly, and in the temperature at ca. 492 K looses four (CH₃)₂SO molecules per one formula unit. During further heating [Sr(DMSO)₂](ClO₄)₂ melts and simultaneously decomposes with explosion. Differential scanning calorimetry (DSC) measurements performed in the temperature range of 93–370 K for [Sr(DMSO)₆](ClO₄)₂ revealed existence of the following phase transitions: glass ? crystal phase Cr5 at T _g  ≈ 164 K (235 K), phase Cr5 → phase Cr4 at $ T_{\text{c6}}^{\text{h}} $  ≈ 241 K, phase Cr4 → phase Cr3 at $ T_{\text{c5}}^{\text{h}} $  ≈ 255 K, phase Cr3 → phase Cr2 at $ T_{\text{c4}}^{\text{h}} $  ≈ 277 K, phase Cr2 ? phase Cr1 at $ T_{\text{c3}}^{\text{h}} $  ≈ 322 K and $ T_{\text{c3}}^{\text{c}} $  ≈ 314 K, phase Cr1 ? phase Rot2 at $ T_{\text{c2}}^{\text{h}} $  ≈ 327 K and $ T_{\text{c2}}^{\text{c}} $  ≈ 321 K and phase Rot2 ? phase Rot1 at $ T_{\text{c1}}^{\text{h}} $  ≈ 358 K and $ T_{\text{c1}}^{\text{c}} $  ≈ 347 K. Entropy changes values of the phase transitions at $ T_{\text{c1}}^{\text{h}} $ and $ T_{\text{c2}}^{\text{h}} $ (?S ≈ 79 and 24 J mol^?1 K^?1, respectively) indicated that phases Rot1 and Rot2 are substantially orientationally disordered. The solid phases (Cr1–Cr5) are more or less ordered phases (?S ≈ 7, 10, 4 and 3 J mol^?1 K^?1, respectively). Phase transitions in [Sr(DMSO)₆](ClO₄)₂ were also examined by Fourier transform middle infrared spectroscopy (FT-MIR). The characteristic changes in the FT-MIR absorption spectra of the low- and high-temperature phases observed at the phase transition temperatures discovered by DSC allowed us to relate these phase transitions to the changes of the reorientational motions of DMSO ligands and/or to the crystal structure changes.