Influence of ion-background changes on the aquation rate of [CrCl3(H2O)3)]

The influence of change in ion background on the aquation rate constants of [CrCl₃(H₂O)₃)] was studied spectrophotometrically at 25°C over a broad range of ionic strengths (up to several moles/liter). The electrolytes KBr, KCl, NaClO₄, NaCl, NaBr, NaNO₃, HClO₄, HCl, LiClO₄, CaCl₂, LaCl₃, and ethanol were used. It is shown that the rate constant decreases with increasing electrolyte concentration in the electrolytic media (to 0.3 log unit in some of them), while increasing in ethanol media with increasing content of the alcohol.Institute of Inorganic Chemistry, Siberian Branch, Russian Academy of Sciences, 630090 Novosibirsk. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 12, pp. 2695–2699, December, 1992.     

Chemistry of ruthenium in N2P2X2 (X = Cl, Br) coordination sphere: Synthesis, characterization and reactivities

Reaction of 2-(phenylazo)pyridine (pap) with [Ru(PPh₃)₃X₂] (X = Cl, Br) in dichloromethane solution affords [Ru(PPh₃)₂(pap)X₂]. These diamagnetic complexes exhibit a weakdd transition and two intense MLCT transitions in the visible region. In dichloromethane solution they display a one-electron reduction of pap near − 0.90 V vs SCE and a reversible ruthenium(II)-ruthenium(III) oxidation near 0.70 V vs SCE. The [Ru^III(PPh₃)₂(pap)Cl₂]⁺ complex cation, generated by coulometric oxidation of [Ru(PPh₃)₂(pap)Cl₂], shows two intense LMCT transitions in the visible region. It oxidizes N,N-dimethylaniline and [Ru^II(bpy)₂Cl₂] (bpy = 2,2′-bipyridine) to produce N,N,N′,N′-tetramethylbenzidine and [Ru^III(bpy)₂Cl₂]⁺ respectively. Reaction of [Ru(PPh₃)₂(pap)X₂] with Ag⁺ in ethanol produces [Ru(PPh₃)₂(pap)(EtOH)₂]²⁺ which upon further reaction with L (L = pap, bpy, acetylacetonate ion(acac⁻) and oxalate ion (ox²⁻)) gives complexes of type [Ru(PPh₃)₂(pap)(L)]ⁿ⁺ (n = 0, 1, 2). All these diamagnetic complexes show a weakdd transition and several intense MLCT transitions in the visible region. The ruthenium(II)-ruthenium(III) oxidation potential decreases in the order (of L): pap > bpy > acac⁻ > ox²⁻. Reductions of the coordinated pap and bpy are also observed.     

Chromium(III) Hydroxide Solubility in the Aqueous K+-H+-OH?-CO2-HCO 3? -CO 32? -H2O System: A?Thermodynamic Model

Chromium(III)-carbonate reactions are expected to be important in managing high-level radioactive wastes. Extensive studies on the solubility of amorphous Cr(III) hydroxide solid in a wide range of pH (3–13) at two different fixed partial pressures of CO₂(g) (0.003 or 0.03 atm.), and as functions of K₂CO₃ concentrations (0.01 to 5.8 mol⋅kg⁻¹) in the presence of 0.01 mol⋅dm⁻³ KOH and KHCO₃ concentrations (0.001 to 0.826 mol⋅kg⁻¹) at room temperature (22±2 °C) were carried out to obtain reliable thermodynamic data for important Cr(III)-carbonate reactions. A combination of techniques (XRD, XANES, EXAFS, UV-Vis-NIR spectroscopy, thermodynamic analyses of solubility data, and quantum mechanical calculations) was used to characterize the solid and aqueous species. The Pitzer ion-interaction approach was used to interpret the solubility data. Only two aqueous species [Cr(OH)(CO₃)₂²⁻ and Cr(OH)₄CO₃³⁻] are required to explain Cr(III)-carbonate reactions in a wide range of pH, CO₂(g) partial pressures, and bicarbonate and carbonate concentrations. Calculations based on density functional theory support the existence of these species. The log ₁₀ K° values of reactions involving these species [{Cr(OH)₃(am) + 2CO₂(g)⇌Cr(OH)(CO₃)₂²⁻+2H⁺} and {Cr(OH)₃(am) + OH⁻+CO₃²⁻ ⇌Cr(OH)₄CO₃³⁻}] were found to be −(19.07±0.41) and −(4.19±0.19), respectively. No other data on any Cr(III)-carbonato complexes are available for comparisons.     

Synthesis and crystal structures of the chromium(II) and chromium(III) hexafluoroacetylacetonate complexes trans-Cr(hfac)2(thf)2 and Cr(hfac)3

Treatment of a tetrahydrofuran solution of CrCl₂(thf) with Na(hfac), hfac = 1,1,1,5,5,5-hexafluoroacetylacetonate, followed by crystallization from diethyl ether, affords the six-coordinate chromium(II) complex Cr(hfac)₂(thf)₂. The crystal structures of Cr(hfac)₂(thf)₂ and the chromium(III) complex Cr(hfac)₃ have been determined by single-crystal X-ray diffraction. Cr(hfac)₂(thf)₂ adopts a trans octahedral geometry, in which the Cr–O(hfac) and Cr–O(thf) distances are 1.936(3) and 2.019(6) Å, respectively. Cr(hfac)₃ is an octahedral compound with a Cr–O distance of 1.943(5) Å. Structural comparisons with related molecules are given.     

Crystal structure of Li2Cu3(SeO3)2(SeO4)2

Summary Single crystal X-ray data of the hydrothermally grown new phase Li₂Cu₃(SeO₃)₂(SeO₄)₂ were measured with a four-circle diffractometer up to sin /=0.81 Å^–1 [I2/a,Z=4,V=1175.5 ų,a=16.293(6),b=5.007(2),c=14.448(6) Å, = 94.21(1)°]. The structure was determined by direct and Fourier methods and refined toR=0.034,R _w =0.027 for 2 086 independent reflections.Cu(1)^[4+1]O₅ forms a tetragonal pyramid, Cu(2)^{[4 + 2]}O₆ is a strongly elongated octahedron. The Li atom is surrounded by four O atoms forming a distorted tetrahedron. Se(IV)O₃ and Se(VI)O₄ groups are in accordance to literature, mean Se-O bond lengths are 1.714 and 1.644 Å.

---

Die Kristallstruktur von Li₂Cu₃(SeO₃)₂(SeO₄)₂

Zusammenfassung Einkristall-Röntgendaten der hydrothermal gezüchteten neuen Phase Li₂Cu₃(SeO₃)₂(SeO₄)₂ wurden mit einem Vierkreisdiffraktometer im Bereich bis zu sin /=0.81 Å^–1 gemessen [I2/a,Z=4,V=1175.5 ų,a=16.293(6),b=5.007(2),c=14.448(6) Å, =94.21(1)°]. Die Kristallstruktur wurde mittels direkter und Fourier-Methoden bestimmt und für 2 086 unabhängige Reflexe zuR=0.034,R _w =0.027 verfeinert.Cu(1)^[4+1]O₅ bildet eine tetragonale Pyramide, Cu(2)^[4+2]O₆ ist ein stark verlängertes Oktaeder. Das Li-Atom ist von vier O-Atomen in Gestalt eines verzerrten Tetraeders umgeben. Die Se(IV)O₃-und Se(VI)O₄-Gruppen entsprechen der Literatur, die mittleren Se-O-Abstände betragen 1.714 und 1.644 Å.

     

PbCu3(OH)(NO3)(SeO3)3·1/2H2O und Pb2Cu3O2(NO3)2(SeO3)2: Synthese und Kristallstrukturuntersuchung

Crystals of PbCu₃(OH)(NO₃)(SeO₃)₃·1/2H₂O [a=7.761(3)Å,b=9.478(4)Å,c=9.514(4)Å, =66.94(2)°, =69.83(2)°, =81.83(2)°, space group P ,Z=2] and Pb₂Cu₃O₂(NO₃)₂(SeO₃)₂ [a=5.884(2)Å,b=12.186(3)Å,c=19.371(4)Å, space group Cmc2₁,Z=4] were synthesized under hydrothermal conditions. Their crystal structures were refined with three-dimensional X-ray data toR _w=0.033 resp. 0.055. In PbCu₃(OH)(NO₃)(SeO₃)₃·1/2H₂O the Cu atoms are [4+1] and [4+2] coordinated and via SeO₃ groups a three-dimensional atomic arrangement is built up. In Pb₂Cu₃O₂(NO₃)₂(SeO₃)₂ there are sheets, which are connected only via Pb-O bonds ranging from 2.98 Å to 3.16 Å.

     

Chromium(III) Hydroxide Solubility in The Aqueous Na+-OH?-H2PO?4-HPO2?4-PO3?4-H2O System: A Thermodynamic Model

Chromium(III)-phosphate reactions are expected to be important in managing high-level radioactive wastes stored in tanks at many DOE sites. Extensive studies on the solubility of amorphous Cr(III) solids in a wide range of pH (2.8–14) and phosphate concentrations (10^–4 to 1.0 m) at room temperature (22±2)°C were carried out to obtain reliable thermodynamic data for important Cr(III)-phosphate reactions. A combination of techniques (XRD, XANES, EXAFS, Raman spectroscopy, total chemical composition, and thermodynamic analyses of solubility data) was used to characterize solid and aqueous species. Contrary to the data recently reported in the literature,⁽¹⁾ only a limited number of aqueous species [Cr(OH)₃H₂PO^–₄, Cr(OH)₃(H₂PO₄)^2–₂), and Cr(OH)₃HPO^2–₄] with up to about four orders of magnitude lower values for the formation constants of these species are required to explain Cr(III)-phosphate reactions in a wide range of pH and phosphate concentrations. The log K^o values of reactions involving these species [Cr(OH)₃(aq)+H₂PO^–₄⇌Cr(OH)₃H₂PO^–₄; Cr(OH)₃(aq)+2H₂PO^–₄⇌Cr(OH)₃(H₂PO₄)^2–₂; Cr(OH)₃(aq)+HPO^2–₄⇌Cr(OH)₃HPO^2–₄] were found to be 2.78±0.3, 3.48±0.3, and 1.97±0.3, respectively.     

Kinetics of the thermal decomposition of [Co(NH3)6]2(C2O4)3·4H2O

The thermal decomposition of [Co(NH₃)₆]₂(C₂O₄)₃·4H₂O was studied under isothermal conditions in flowing air and argon. Dissociation of the above complex occurs in three stages. The kinetics of the particular stages thermal decomposition have been evaluated. The R_N and/or A_M models were selected as those best fitting the experimental TG curves. The activation energies,E, and lnA were calculated with a conventional procedure and by a new method suggested by Kogaet al. [10, 11]. Comparison of the results have showed that the Arrhenius parameters values estimated by the use of both methods are very close. The calculated activation energies were in air: 96 kJ mol^–1 (R_1.575, stage I); 101 kJ mol^–1 (Ain1.725 stage II); 185 kJ mol^–1 (A _2.9, stage III) and in argon: 66 kJ mol^–1 (A _1.25, stage I); 87 kJ mol^–1 (A _1.825, stage II); 133 kJ mol^–1 (A _2.525, stage III).     

Reaktionen von Cyclostibanen (RSb)n [R = (Me3Si)2CH,n = 3; Me3CCH2, n = 4, 5] mit den Übergangsmetallcarbonyl‐Komplexen [W(CO)5(thf)], [CpxMn(CO)2(thf)], [CpxCr(CO)3]2 und [Co2(CO)8]; Cpx = MeC5H4

Reactions of Cyclostibanes, (RSb)_n [R = (Me₃Si)₂CH, n = 3; Me₃CCH₂, n = 4, 5] with the Transition Metal Carbonyl Complexes [W(CO)₅(thf)], [Cp^xMn(CO)₂(thf)], [Cp^xCr(CO)₃]₂, and [Co₂(CO)₈]; Cp^x = MeC₅H₄ (RSb)₃ [R = (Me₃Si)₂CH] reacts with [W(CO)₅(thf)], [Cp^xMn(CO)₂(thf)], or [Co₂(CO)₈] to give [(RSb)₃W(CO)₅] ( 1 ), [RSb{Mn(CO)₂Cp^x}₂] ( 2 ) or [RSbCo(CO)₃]₂ ( 3 ). The reaction of (R′Sb)_n (n = 4, 5; R′ = Me₃CCH₂) with [Cp^xCr(CO)₃]₂ leads to [(R′Sb)₄{Cr(CO)₂Cp^x}₂] ( 4 ); Cp^x = MeC₅H₄, thf = Tetrahydrofuran.     

Structural elucidation of a methylenation reagent of esters: synthesis and reactivity of a dinuclear titanium(iii) methylene complex

Transmetallation of a zinc methylene complex [ZnI(tmeda)]₂(μ-CH₂) with a titanium(iii) chloride [TiCl₃(tmeda)(thf)] produced a titanium methylene complex. The X-ray diffraction study displayed a dinuclear methylene structure [TiCl(tmeda)]₂(μ-CH₂)(μ-Cl)₂. Treatment of an ester with the titanium methylene complex resulted in methylenation of the ester carbonyl to form a vinyl ether. The titanium methylene complex also reacted with a terminal olefin, resulting in olefin-metathesis and olefin-homologation. Cyclopropanation by methylene transfer from the titanium methylene proceeded by use of a 1,3-diene. The mechanistic study of the cyclopropanation reaction by the density functional theory calculations was also reported.

Transmetallation of a zinc methylene complex [ZnI(tmeda)]₂(μ-CH₂) with a titanium(iii) chloride [TiCl₃(tmeda)(thf)] produced a titanium methylene complex.     

Studies on synthesis, characterization and thermochemistry of Mg2[B2O4(OH)2]·H2O

A new magnesium borate Mg₂[B₂O₄(OH)₂]·H₂O has been synthesized by the method of phase transformation of double salt at hydrothermal condition and characterized by XRD, IR, TG and DSC. The enthalpy of solution of Mg₂[B₂O₄(OH)₂]·H₂O in 0.9764 mol L^–1 HCl was determined. With the incorporation of the enthalpies of solution of H₃BO₃ in HCl (aq), of MgO in (HCl+H₃BO₃) (aq), and the standard molar enthalpies of formation of MgO(s), H₃BO₃(s), and H₂O(l), the standard molar enthalpy of formation of –(3185.78±1.91) kJ mol^–1 of Mg₂[B₂O₄(OH)₂]·H₂O was obtained.This revised version was published online in November 2005 with corrections to the Cover Date.     

Calorimetric study and thermal analysis of [Gd4/3Y2/3(Gly)6(H2O)4](ClO4)6·5H2O and [ErY(Gly)6(H2O)4](ClO4)6·5H2O (Gly: glycin)

Two solid-state coordination compounds of rare earth metals with glycin, [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O and [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O were synthesized. The low-temperature heat capacities of the two coordination compounds were measured with an adiabatic calorimeter over the temperature range from 78 to 376 K. [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O melted at 342.90 K, while [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O melted at 328.79 K. The molar enthalpy and entropy of fusion for the two coordination compounds were determined to be 18.48 kJ mol⁻¹ and 53.9 J K⁻¹ mol⁻¹ for [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O, 1.82 kJ mol⁻¹ and 5.5 J K⁻¹ mol⁻¹ for [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O, respectively. Thermal decompositions of the two coordination compounds were studied through the thermogravimetry (TG). Possible mechanisms of the decompositions are discussed.     

Syntheses and characterization of two oxoborates, (Pb3O)2(BO3)2MO4 (M=Cr, Mo)

Two oxoborates, (Pb₃O)₂(BO₃)₂MO₄ (M=Cr, Mo), have been prepared by solid-state reactions below 700 °C. Single-crystal XRD analyses showed that the Cr compound crystallizes in the orthorhombic group Pnma with a=6.4160(13) Å, b=11.635(2) Å, c=18.164(4) Å, Z=4 and the Mo analog in the group Cmcm with a=18.446(4) Å, b=6.3557(13) Å, c=11.657(2) Å, Z=4. Both compounds are characterized by one-dimensional chains formed by corner-sharing OPb₄ tetrahedra. BO₃ and CrO₄ (MoO₄) groups are located around the chains to hold them together via Pb–O bonds. The IR spectra further confirmed the presence of BO₃ groups in both structures and UV–vis diffuse reflectance spectra showed band gaps of about 1.8 and 2.9 eV for the Cr and Mo compounds, respectively. Band structure calculations indicated that (Pb₃O)₂(BO₃)₂MoO₄ is a direct semiconductor with the calculated energy gap of about 2.4 eV.     

Reaction of Os3(μ-Cl)2(CO)10 with Ph2PCH2PPh2. The formation of a novel 12-membered macrocycle containing C, P, Cl, and Os atoms in the ring

The reaction of Os₃(μ-Cl)₂(CO)₁₀ (1) with Ph₂PCH₂PPh₂ (dppm) in a toluene solution at 65°C results in novel osmium complexes [Os₃(μ-Cl)₂(CO)₉]₂(dppm) (2) and [Os₃(μ-Cl)₂(CO)₈]₂(dppm)₂ (3). Compounds 2 and 3 were characterized by¹H and³¹P NMR, and IR spectroscopy and their structures were established by X-ray analysis. In both compounds, dppm is a bridging ligand between the two cluster units. Molecule3 can be considered as an unusual 12-membered macrocycle containing C, P, Cl, and Os atoms in the ring. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1844–1851, September, 1998.     

Synthesis of [(μ-RS)(μ-S){Fe2(CO)6}2(μ4-S)] and their reactivity toward electrophiles

Reaction of the Et₃NH⁺ salts of the [(μ-RS)(μ-CO)Fe₂(CO)₆]⁻ anions (R=Bu^t, Ph or PhCH₂) with (μ-S₂)Fe₂(CO)₆ gives reactive intermediates [(μ-RS)(μ-S){Fe₂(CO)₆}₂(μ₄-S)]⁻. Reactions of the latter with alkyl halides, acid chlorides and Cp(CO)₂FeI have been studied. X-Ray structure of (μ-Bu^tS)(μ-PhCH₂S)[Fe₂(CO)₆]₂(μ₄-S) was determined.     

Syntheses and Molecular Structures of [(thf)4Li] [{(thf)Li}M(C4H8)3] (M = Zr,Hf) and Their Solution Behavior

The reaction of MCl₄(thf)₂ (M = Zr, Hf) with 1,4-dilitiobutane in diethyl ether at –25 °C or at 0 °C with a molar ratio of 1 : 3 yields the homoleptic “ate” complexes [(thf)₄Li] [{(thf)Li}M(C₄H₈)₃] 1 - Zr (M = Zr) and 1 - Hf (M = Hf). The crystalline compounds form ion lattices with solvent-separated [(thf)₄Li]⁺ cations and [{(thf)Li}M(C₄H₈)₃]^– anions. The NMR spectra at –20 °C show magnetic equivalence of the M–CH₂ and of the β-CH₂ groups of the butane-1,4-diide ligands on the NMR time scale. Analogous reactions of MCl₄(thf)₂ with 1,4-dilithiobutane with a molar ratio of 1 : 2 proceed unclear. However, single crystals of [Li(thf)₄] [HfCl₅(thf)] ( 2 ) can be isolated with the hafnium atom in a distorted octahedral coordination sphere of five chloro and one thf ligand. NMR spectra allow to elucidate the time-dependent degradation of 1-Hf and 1-Zr in THF and toluene at 25 °C via THF cleavage. Addition of tmeda to a solution of 1-Zr allows the isolation of intermediately formed [{(tmeda)Li}₂Zr(nBu)₂(C₄H₈)₂] ( 3 ).     

Preparation and Crystal Structure of the Neodymium Borohydride [Li(thf)4]2[Nd2(μ‐Cl)2(BH4)6(thf)2]

The neodymium borohydride [Li(thf)₄]₂[Nd₂(μ‐Cl)₂(BH₄)₆(thf)₂] was synthesized from neodymium chloride and lithium borohydride. The compound crystallized in the triclinic crystal system, space group (No. 2) with the cell constants a = 14.8613(11), b = 17.8715(13), c = 23.5846(18) Å, α = 100.760(6), β = 90.648(6) and γ = 103.294(6)°. Each neodymium atom is coordinated by three borohydride anions and a THF molecule whereas two neodymium cations are bridged through two chloro ligands. The charge of the [Nd₂(μ‐Cl)₂(BH₄)₆(thf)₂]²⁻ anion, which represents the first structurally characterized binuclear mixed borohydride chlorido complex, is compensated by two [Li(thf)₄]⁺ cations.     

Solubility of (UO2)3(PO4)2?4H2O in H+-Na+-OH?-H2PO?4-HPO2?4-PO3?4-H2O and Its Comparison to the Analogous PuO2 +2 System

The objectives of this study were to address uncertainties in the solubility product of (UO₂)₃(PO₄)₂⋅4H₂O(c) and in the phosphate complexes of U(VI), and more importantly to develop needed thermodynamic data for the Pu(VI)-phosphate system in order to ascertain the extent to which U(VI) and Pu(VI) behave in an analogous fashion. Thus studies were conducted on (UO₂)₃(PO₄)₂⋅4H₂O(c) and (PuO₂)₃(PO₄)₂⋅4H₂O(am) solubilities for long-equilibration periods (up to 870 days) in a wide range of pH values (2.5 to 10.5) at fixed phosphate concentrations of 0.001 and 0.01 M, and in a range of phosphate concentrations (0.0001–1.0 M) at fixed pH values of about 3.5. A combination of techniques (XRD, DTA/TG, XAS, and thermodynamic analyses) was used to characterize the reaction products. The U(VI)-phosphate data for the most part agree closely with thermodynamic data presented in Guillaumont et al.,⁽¹⁾ although we cannot verify the existence of several U(VI) hydrolyses and phosphate species and we find the reported value for formation constant of UO₂PO⁻₄ is in error by more than two orders of magnitude. A comprehensive thermodynamic model for (PuO₂)₃(PO₄)₂⋅4H₂O(am) solubility in the H⁺-Na⁺-OH⁻-Cl⁻-H₂PO⁻₄-HPO²⁻₄-PO³⁻₄-H₂O system, previously unavailable, is presented and the data shows that the U(VI)-phosphate system is an excellent analog for the Pu(VI)-phosphate system.     

Self-Assembly of Antiferromagnetically-Coupled Copper(II) Supramolecular Architectures with Diverse Structural Complexities

The self-assembly of 2,6-diformyl-4-methylphenol (DFMP) and 1-amino-2-propanol (AP)/2-amino-1,3-propanediol (APD) in the presence of copper(II) ions results in the formation of six new supramolecular architectures containing two versatile double Schiff base ligands (H₃L and H₅L1) with one-, two-, or three-dimensional structures involving diverse nuclearities: tetranuclear [Cu₄(HL²⁻)₂(N₃)₄]·4CH₃OH·56H₂O (1) and [Cu₄(L³⁻)₂(OH)₂(H₂O)₂] (2), dinuclear [Cu₂(H₃L1²⁻)(N₃)(H₂O)(NO₃)] (3), polynuclear {[Cu₂(H₃L1²⁻)(H₂O)(BF₄)(N₃)]·H₂O}_n (4), heptanuclear [Cu₇(H₃L1²⁻)₂(O)₂(C₆H₅CO₂)₆]·6CH₃OH·44H₂O (5), and decanuclear [Cu₁₀(H₃L1²⁻)₄(O)₂(OH)₂(C₆H₅CO₂)₄] (C₆H₅CO₂)₂·20H₂O (6). X-ray studies have revealed that the basic building block in 1, 3, and 4 is comprised of two copper centers bridged through one μ-phenolate oxygen atom from HL²⁻ or H₃L1²⁻, and one μ-1,1-azido (N₃⁻) ion and in 2, 5, and 6 by μ-phenoxide oxygen of L³⁻ or H₃L1²⁻ and μ-O²⁻ or μ₃-O²⁻ ions. H-bonding involving coordinated/uncoordinated hydroxy groups of the ligands generates fascinating supramolecular architectures with 1D-single chains (1 and 6), 2D-sheets (3), and 3D-structures (4). In 5, benzoate ions display four different coordination modes, which, in our opinion, is unprecedented and constitutes a new discovery. In 1, 3, and 5, Cu(II) ions in [Cu₂] units are antiferromagnetically coupled, with J ranging from −177 to −278 cm⁻¹.     

Cr2(WO4)3和Cr2(MoO4)3的负热膨胀特性研究

用液相反应-前驱物烧结法制备了Cr₂(WO₄)₃和Cr₂(MoO₄)₃粉体。298～1 073 K的原位粉末X射线衍射数据表明Cr₂(WO₄)₃和Cr₂(MoO₄)₃的晶胞体积随温度的升高而增大, 本征线热膨胀系数分别为(1.274±0.003)×10^-6 K^-1和(1.612±0.003)×10^-6 K^-1。用热膨胀仪研究了Cr₂(WO₄)₃和Cr₂(MoO₄)₃在静态空气中298～1 073 K范围内热膨胀行为，即开始表现为正热膨胀，随后在相转变点达到最大值，最后表现为负热膨胀，其负热膨胀系数分别为(-7.033±0.014)×10^-6 K^-1和(-9.282±0.019)×10^-6 K^-1。