Electrochemical Biosensor Based on Carbon Ionic Liquid Electrode Modified with Nafion/Hemoglobin/DNA Composite Film

A new electrochemical biosensor was constructed by immobilization of hemoglobin (Hb) on a DNA modified carbon ionic liquid electrode (CILE), which was prepared by using 1‐ethyl‐3‐methylimidazolium tetrafluoroborate (EMIMBF₄) as the modifier. UV‐vis absorption spectroscopic result indicated that Hb remained its native conformation in the composite film. The fabricated Nafion/Hb/DNA/CILE was characterized by scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). A pair of well‐defined redox peaks was obtained on the modified electrode, indicated that the Nafion and DNA composite film provided an excellent biocompatible microenvironment for keeping the native structure of Hb and promoting the direct electron transfer rate of Hb with the basal electrode. The electrochemical parameters of Hb in the composite film were further calculated with the results of the charge transfer coefficient (α) and the apparent heterogeneous electron transfer rate constant (k_s) as 0.41 and 0.31 s^?1. The proposed electrochemical biosensor showed good electrocatalytic response to the reduction of trichloroacetic acid (TCA), H₂O₂, NO and the apparent Michaelis–Menten constant (K_M^app) for the electrocatalytic reaction was calculated, respectively.     

Fabrication of Fe(CN)63− Functionalized PDDA/CdTe Layer‐by‐layer Film with Good Electron Transfer Ability

(PDDA/CdTe)_n layer‐by‐layer (LBL) film immobilized with Fe(CN)₆^3? was fabricated on the gold electrode. Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) were used to investigate the electrochemical properties of this film. The peak current of the immobilized Fe(CN)₆^3? increased as the number of the bilayers increased and was proportional to the scan rate. Compared with pure (PDDA/CdTe)_n and (PDDA/PSS)_n LBL film, Fe(CN)₆^3? immobilized (PDDA/CdTe)_n LBL film had good electron transfer ability. The immobility of Fe(CN)₆^3? into the film was attributed to its interaction with Cd²⁺ on the surface of CdTe QDs. Fe(CN)₆^3? also can interact with other metal ions, which would make Fe(CN)₆^3? release from the film. The concentrations of metal ions will affect the CV response of Fe(CN)₆^3? immobilized LBL film. It has provided a novel prototype of device or sensor for quantitative detection of metal ions.     

Carbon Nanotubes‐Based Amperometric Cholesterol Biosensor Fabricated Through Layer‐by‐Layer Technique

A carbon nanotubes‐based amperometric cholesterol biosensor has been fabricated through layer‐by‐layer (LBL) deposition of a cationic polyelectrolyte (PDDA, poly(diallyldimethylammonium chloride)) and cholesterol oxidase (ChOx) on multi‐walled carbon nanotubes (MWNTs)‐modified gold electrode, followed by electrochemical generation of a nonconducting poly(o‐phenylenediamine) (PPD) film as the protective coating. Electrochemical impedance measurements have shown that PDDA/ChOx multilayer film could be formed uniformly on MWNTs‐modified gold electrode. Due to the strong electrocatalytic properties of MWNTs toward H₂O₂ and the low permeability of PPD film for electroacitve species, such as ascorbic acid, uric acid and acetaminophen, the biosensor has shown high sensitivity and good anti‐interferent ability in the detection of cholesterol. The effect of the pH value of the detection solution on the response of the biosensor was also investigated. A linear range up to 6.0 mM has been observed for the biosensor with a detection limit of 0.2 mM. The apparent Michaelis‐Menten constant and the maximum response current density were calculated to be 7.17 mM and 7.32 μA cm^?2, respectively.     

Preparation of a Novel NH2 + Ion Implantation Modified Electrode and Its Study of the Electrochemical Behavior of Hemoglobin

Abstract

A novel functional electrode was obtained by implanting NH₂ ⁺ into ITO film (NH₂/ITO) for the first time. The NH₂/ITO surface showed a better affinity to gold nanoparticles than bare ITO. Gold nanoparticles were deposited on the surface of NH₂/ITO electrode (Au/NH₂/ITO). The Au/NH₂/ITO and NH₂/ITO electrodes were used to observe the electrochemical behavior of Hemoglobin (Hb) immobilized on the electrodes surfaces. The peak current value of Hb immobilized on NH₂/ITO increased compared with on bare ITO while peak current value of Hb immobilized on Au/NH₂/ITO increased compared with on Au/ITO. Linkage between the ‐NH₂ implanted into the ITO film and the ‐COOH of Hb was thought to be the reason for the increase of active Hb coverage on NH₂/ITO compared with bare ITO. Increase of active Hb coverage on Au/NH₂/ITO compare with Au/ITO was attributed to the different amount of gold nanoparticles deposited. Results showed the novel NH₂/ITO and Au/NH₂/ITO electrodes exhibited good stability, reproducibility besides selectivity and sensitivity. The electrode process of Hb immobilized on Au/NH₂/ITO was quasi‐reversible with adsorption. The electrode reaction rate constant k_s and other related constants were determined. X‐ray photoelectron spectroscopy (XPS), field‐emission scanning electron microscopy (FE‐SEM), and impedance spectra were used to characterize the different surfaces.     

Electrochemistry and Electrocatalysis of a Nafion/Nano‐CaCO3/Hb Film Modified Carbon Ionic Liquid Electrode Using BMIMPF6 as Binder

In this paper a room temperature ionic liquid 1‐butyl‐3‐methylimidazolium hexafluorophosphate (BMIMPF₆) was used as binder for the construction of carbon ionic liquid electrode (CILE) and a new electrochemical biosensor was developed for determination of H₂O₂ by immobilization of hemoglobin (Hb) in the composite film of Nafion/nano‐CaCO₃ on the surface of CILE. The Hb modified electrode showed a pair of well‐defined, quasi‐reversible redox peaks with E_pa and E_pc as ?0.265 V and ?0.470 V (vs. SCE). The formal potential (E°′) was got by the midpoint of E_pa and E_pc as ?0.368 V, which was the characteristic of Hb Fe(III)/Fe(II) redox couples. The peak to peak separation was 205 mV in pH 7.0 Britton–Robinson (B–R) buffer solution at the scan rate of 100 mV/s. The direct electrochemistry of Hb in the film was carefully investigated and the electrochemical parameters of Hb on the modified electrode were calculated as α=0.487 and k_s=0.128 s^?1. The Nafion/nano‐CaCO₃/Hb film electrode showed good electrocatalysis to the reduction of H₂O₂ in the linear range from 8.0 to 240.0 μmol/L and the detection limit as 5.0 μmol/L (3σ). The apparent Michaelis–Menten constant (K_M^app) was estimated to be 65.7 μmol/L. UV‐vis absorption spectroscopy and FT‐IR spectroscopy showed that Hb in the Nafion/nano‐CaCO₃ composite film could retain its native structure.     

Electrochemical Synthesis of Chitosan‐co‐polyaniline/WO3⋅nH2O Composite Electrode for Amperometric Detection of NO2 Gas

An electrode of hydrated tungsten oxide (WO₃?nH₂O) embedded chitosan‐co‐polyaniline (CHIT‐co‐PANI) composite was electrochemically prepared on an indium tin oxide (ITO) coated glass surface using mineral acid as a supporting electrolyte. The resulting CHIT‐co‐PANI/WO₃?nH₂O/ITO electrode was characterized using ultraviolet‐visible spectroscopy (UV‐vis), Fourier transform infrared spectroscopy (FTIR), cyclic voltammetry (CV), and scanning electron microscopy (SEM). The composite electrode exhibited a three‐dimensional nanofibrous structure with the diameter of the nanofibers ranging from 20 to 100 nm. The CHIT‐co‐PANI/WO₃?nH₂O/ITO electrode allowed for the low potential detection of NO₂ gas in acidic medium. The NO₂ gas sensing characteristics were studied by measuring change in the current with respect to concentration and time. Using the CHIT‐co‐PANI/WO₃?nH₂O/ITO electrode, NO₂ gas was detected electrochemically without interference at pH 2.0 and 0.25 V vs. Ag/AgCl. The current of the electrochemical cell with the CHIT‐co‐PANI/WO₃?nH₂O/ITO electrode decreased linearly with an increase in NO₂ gas concentration in a range from 100 to 500 ppb with a response time of eight seconds.     

Direct Electrochemistry of Cytochrome c Based on Poly(diallyldimethylammonium Chloride)‐ Graphene Nanosheets/Gold Nanoparticles Hybrid Nanocomposites and Its Biosensing

A novel biosensor was developed by entrapping cytochrome c (Cyt c) in thin films of the room temperature ionic liquid (RTIL) containing nanocomposites of poly(diallyldimethylammonium chloride)‐graphene nanosheets‐gold nanoparticles (PDDA‐Gp‐AuNPs) at a 11‐mercaptoundecanoic acid‐6‐mercapto‐1‐hexanol modified gold electrode. The synthesized PDDA‐Gp‐AuNPs hybrid nanocomposites were characterized by UV‐vis spectroscopy, Raman spectroscopy, scanning electron microscopy and atomic force microscopy. The PDDA‐Gp‐AuNPs nanocomposites could increase the effective surface of the electrode, enhance the fixed amount of Cyt c on the electrode surface, promote the electron transfer and facilitate the catalytic activity of Cyt c. The RTIL could provide a biocompatible microenvironment to keep Cyt c biological activities, act as an effective mediator to immobilize a large number of Cyt c on the electrode and have good conductivity to improve electron transfer. Therefore, the resultant electrode exhibited good electrochemical performance and electrocatalytic activity. It could be used for electrochemical detection of H₂O₂ with rapid response, high sensitivity, wide linear range and low detection limit, as well as good stability, repeatability and selectivity. The sensor might be promising for practical application.     

Electrochemical Study of Chitosan‐SiO2‐MWNT Composite Electrodes for the Fabrication of Cholesterol Biosensors

We report a novel composite electrode made of chitosan‐SiO₂‐multiwall carbon nanotube (CHIT‐SiO₂‐MWNT) composite coated on the indium‐tin oxide (ITO) glass substrate. Cholesterol oxidase (ChOx) was covalently immobilized on the CHIT‐SiO₂‐MWNT/ITO electrode that resulted in a ChOx/CHIT‐SiO₂‐MWNT/ITO cholesterolactive bioelectrode. The CHIT‐SiO₂‐MWNT/ITO and ChOx/CHIT‐SiO₂‐MWNT/ITO electrodes were characterized with Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The influence of various parameters was investigated, including the applied potential, pH of the medium, and the concentration of the enzyme on the performance of the biosensor. The cholesterol bioelectrode exhibited a sensitivity of 3.4 nA/ mgdL^?1 with a response time of five seconds. The biosensor using ChOx/CHIT‐SiO₂‐MWNT/ITO as the working electrode retained its original response after being stored for six months. The biosensor using ChOx/CHIT‐SiO₂‐MWNT/ITO as the working electrode showed a linear current response to the cholesterol concentration in the range of 50–650 mg/dL.     

Immobilization and Bioelectrochemistry of Hemoglobin Based on Carrageenan and Room Temperature Ionic Liquid Composite Film

A novel biopolymer/room‐temperature ionic liquid composite film based on carrageenan, room temperature ionic liquid (IL) [1‐butyl‐3‐methylimidazolium tetra?uoroborate ([BMIM]BF₄)] was explored for immobilization of hemoglobin (Hb) and construction of biosensor. Direct electrochemistry and electrocatalytic behaviors of Hb entrapped in the IL‐carrageenan composite ?lm on the surface of glassy carbon electrode (GCE) were investigated. UV‐vis spectroscopy demonstrated that Hb in the IL‐carrageenan composite ?lm could retain its native secondary structure. A pair of well‐de?ned redox peaks of Hb was obtained at the Hb‐IL‐carrageenan composite ?lm modi?ed electrode through direct electron transfer between the protein and the underlying electrode. The heterogeneous electron transfer rate constant (k_s) was 2.02 s^?1, indicating great facilitation of the electron transfer between Hb and IL‐carrageenan composite film modi?ed electrode. The modi?ed electrode showed excellent electrocatalytic activity toward reduction of hydrogen peroxide with a linear range of 5.0×10^?6 to 1.5×10^?4 mol/L and the detection limit was 2.12×10^?7 mol/L (S/N=3). The apparent Michaelis‐Menten constant K_M^app for hydrogen peroxide was estimated to be 0.02 mmol/L, indicating that the biosensor possessed high af?nity to hydrogen peroxide. In addition, the proposed biosensor showed good reproducibility and stability.     

Direct Electrochemistry and Electrocatalysis of Hemoglobin in Lipid Film Incorporated with Room‐Temperature Ionic Liquid

A facile phospholipid/room‐temperature ionic liquid (RTIL) composite material based on dimyristoylphosphatidylcholine (DMPC) and 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([bmim]PF₆) was exploited as a new matrix for immobilizing protein. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were adopted to characterize this composite film. Hemoglobin (Hb) was chosen as a model protein to investigate the composite system. UV‐vis absorbance spectra showed that Hb still maintained its heme crevice integrity in this composite film. By virtue of the Hb/DMPC/[bmim]PF₆ composite film‐modified glassy carbon electrode (GCE), a pair of well‐defined redox peaks of Hb was obtained through the direct electron transfer between protein and underlying GCE. Moreover, the reduction of O₂ and H₂O₂ at the Hb/DMPC/[bmim]PF₆ composite film‐modified GCE was dramatically enhanced.     

Preparation of an Electrode That Immobilizes NAD‐Dependent Alcohol Dehydrogenase by Using a Redox Polymer Containing 1,10‐Phenanthroline‐5,6‐dione

A redox polymer (PAHA‐Ru), modified electrode exhibited excellent catalytic activity for the electrochemical oxidation of β‐nicotinamide adenine dinucleotide (NADH). PAHA‐Ru was composed of carboxyl groups and ruthenium complexes containing 1,10‐phenanthroline‐5,6‐dione (phen‐dione). The stability of the PAHA‐Ru film was increased by incorporating poly(diallyldimethylammonium chloride) (PDDA) owing to the formation of a polyelectrolyte complex between the PAHA‐Ru and PDDA. The catalytic efficiency of the oxidation of NADH using the PAHA‐Ru/PDDA‐modified electrode was also greater than that using a PAHA‐Ru‐modified electrode. NAD‐dependent alcohol dehydrogenase (ADH) was entrapped in the PAHA‐Ru/PDDA film on the surface of the glassy carbon electrode. Electrochemical oxidation of ethanol using the ADH‐entrapped electrode was also observed.     

Layer‐by‐layer Assembled Multilayers of Graphene/Mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin for Detection of Dopamine

Graphene/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin multilayer films composed of graphene sheet (GS) and mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (NH₂‐β‐CD) were fabricated easily by two steps. First, negatively charged graphene oxide (GO) and positively charged mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (NH₂‐β‐CD) were layer‐by‐layer (LBL) self‐assembled on glassy carbon electrode (GCE) modified with a layer of poly(diallyldimethylammonium chloride) (PDDA). Then graphene/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (GS/NH₂‐β‐CD) multilayer films were built up by electrochemical reduction of graphene oxide/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (GO/NH₂‐β‐CD). Combining the high surface area of GS and the active recognition sites on β‐cyclodextrin (β‐CD), the GS/NH₂‐β‐CD multilayer films show excellent electrochemical sensing performance for the detection of DA with an extraordinary broad linear range from 2.53 to 980.05 µmol·L^?1. This study offers a simple route to the controllable formation of graphene‐based electrochemical sensor for the detection of DA.     

Electrodeposition CaCO3 Nanoparticles‐chitosan Composite Film on Carbon Ionic Liquid Electrode as a Platform for Hemoglobin Electrochemical Biosensor

By one‐step co‐electrodeposition CaCO₃ nanoparticles‐chitosan composite film on carbon ionic liquid electrode (CILE), and then by spreading the composition of hemoglobin (Hb) and chitosan on the nanoCaCO₃‐chi/CILE, a Hb‐chi/nanoCaCO₃‐chi/CILE was fabricated and the direct electrochemistry and electrocatalysis of Hb at the electrode was investigated. The electrochemical impedance spectroscopy of the modified electrode showed the electron transfer resistance was 1166 Ω. Investigation results of cyclic voltammetrys showed a pair of well‐defined and quasireversible redox peak of Hb with the formal potentials of ‐0.295 V (vs. SCE) in 0.1 mol·L^‐1 pH 7.0 PBS; the response time of the reduction peak currents of Hb was lower than 3s; a linear range for determination of H₂O₂ was from 5.0 μmol·L^‐1 to 1.3 mmol·L^‐1 with a detection limit of 1.6 μmol·L^‐1 (S/N = 3) and a sensitivity of 0.16 A·M^‐1·cm^‐2; the electron transfer rate constant and the apparent Michaelis‐Menten constant of Hb were 1.98 s^‐1 and 0.81 mmol·L^‐1, respectively. As a result, the case of the one‐step co‐electrodeposition and the promising feature of biocomposite could serve as a versatile platform for the fabrication of electrochemical biosensors.     

Direct Electrochemistry and Electrocatalysis of the Hemoglobin Immobilized on Diazonium‐Functionalized Aligned Carbon Nanotubes Electrode

A simple and efficient electrochemical method is utilized to functionalize aligned carbon nanotubes (ACNTs) by the electrochemical reduction of 4‐carboxyphenyl diazonium salt. Thus hemoglobin (Hb) molecules were covalently immobilized on the diazonium‐ACNTs surface via carbodiimide chemistry. Direct electrochemistry and bioelectrocatalytic activity of the immobilized Hb were then investigated by cyclic voltammetry (CV) and amperometry techniques. It is showed that the Hb film on the diazonium‐ACNTs electrode had well‐defined redox peaks with a formal potential (E°) at ?312 mV (vs. Ag/AgCl), and the Hb‐ACNTs electrode displayed good electrocatalytic activity to H₂O₂ reduction. Owing to the high Hb covering on the ACNTs surface (Γ*=2.7×10^?9 mol cm^?2), the catalytic current were significantly improved when compared to the current measured at an Hb‐tangled carbon nanotubes electrode. The Hb‐ACNTs electrode exhibited high sensitivity, long‐term stability and wide concentration range from 40 μM to 3 mM for the amperometric detection of H₂O₂. The heterogeneous reaction rate constant (k_s) was 0.95±0.05 s^?1 and the apparent Michaelis–Menten constant (K was 0.15 mM.     

Polypyrrole/multiwalled carbon nanotubes‐based biosensor for cholesterol estimation

The nanocomposite electrode comprising of polypyrrole (PPY) and carboxy functionalized multiwalled carbon nanotubes (MWCNT) has been electrochemically fabricated onto indium–tin–oxide (ITO) electrode using p‐toluene sulfonic acid (PTS). Cholesterol oxidase (ChOx) and cholesterol esterase (ChEt) have been immobilized onto this PPY– MWCNT/ITO nanocomposite electrode using N‐ethyl‐N‐(3‐dimethylaminopropyl) carbodiimide and N‐hydroxy succinimide chemistry for estimation of esterified cholesterol. The ChEt–ChOx/PPY–MWCNT/PTS/ITO bioelectrode has been characterized using Fourier transform infrared spectroscopy, electrochemical techniques, and scanning electron microscope. This ChEt–ChOx/PPY–MWCNT/PTS/ITO nanobioelectrode has a response time of about 9 s, linearity of 4 × 10^?4 to 6.5 × 10^?3 M/l of cholesterol oleate concentration, K_m of 0.02 mM, and thermal stability of upto 45°C. This electrode exhibits improved biosensing characteristics compared with other total cholesterol electrodes reported in literature till date and can be used to estimate cholesterol in blood serum samples. Copyright © 2011 John Wiley & Sons, Ltd.     

Photoelectrochemical Immunosensor Array Based on Thioglycolic Acid Capped CdS Quantum Dots for Multiplexed Detection of Veterinary Drug Residues

A photoelectrochemical immunosensor based on multi‐electrode array was developed for simultaneous and sensitive determination of veterinary drug residues. In this system, poly(dimethyldiallylammonium chloride) (PDDA), Au nanoparticles (Au NPs) and thioglycolic acid (TGA)‐capped CdS quantum dots (QDs) were layer‐by‐layer assembled onto the home‐made Au electrode array. The assembling process of the (CdS/PDDA/Au NPs/PDDA)_n multilayer was characterized by electrochemical impedance spectroscopy. And then the antibodies for clenbuterol (CB), ractopamine (RAC) and chloramphenicol (CAP) were covalently immobilized onto the Au electrode array by 1‐ethyl‐3‐(3‐dimethylaminopropyl) carbodiimide (EDC) coupling reaction, respectively. The concentrations of CB, RAC and CAP were measured based on the photoelectrochemical effects of CdS QDs. Under the optimal conditions, the limits of detection (LOD) for CB, RAC and CAP were 25, 50 and 2.2 pg/mL (3Δ), respectively, with acceptable recovery over the range of 95.40%–105.5% in pig liver samples. All results indicate that the immunosensor array system has potential application for practical, effective and high throughput analysis of veterinary drugs residues.     

Sensitively Electrochemical Sensing for Sequence‐Specific Detection of Phosphinothricin Acetyltransferase Gene: Layer‐by‐Layer Films of Poly‐L‐Lysine and Au‐Carbon Nanotube Hybrid

An electrochemical DNA sensing film was constructed based on the multilayers comprising of poly‐L ‐lysine (pLys) and Au‐carbon nanotube (Au‐CNT) hybrid. A precursor film of mercaptopropionic acid (MPA) was firstly self‐assembled on the Au electrode surface. pLys and Au‐CNT hybrid layer‐by‐layer assembly films were fabricated by alternately immersing the MPA‐modified electrode into the pLys solution and Au‐CNT hybrid solution. Cyclic voltammetry was used to monitor the consecutive growth of the multilayer films by utilizing [Fe(CN)₆]^3?/4? and [Co(phen)₃]^3+/2+ as the redox indicators. The outer layer of the multilayer film was the positively charged pLys, on which the DNA probe was easily linked due to the strong electrostatic affinity. The hybridization detection of DNA was accomplished by using methylene blue (MB) as the indicator, which possesses different affinities to dsDNA and ssDNA. Differential pulse voltammetry was employed to record the signal response of MB and determine the amount of the target DNA sequence. The established biosensor has high sensitivity, a relatively wide linear range from 1.0×10^?10 mol/L to 1.0×10^?6 mol/L and the ability to discriminate the fully complementary target DNA from single or double base‐mismatched DNA. The sequence‐specific DNA related to phosphinothricin acetyltransferase gene from the transgenically modified plants was successfully detected.     

Application of NiMoO4 Nanorods for the Direct Electrochemistry and Electrocatalysis of Hemoglobin with Carbon Ionic Liquid Electrode

In this paper NiMoO₄ nanorods were synthesized and used to accelerate the direct electron transfer of hemoglobin (Hb). By using an ionic liquid (IL) 1‐butylpyridinium hexafluorophosphate (BPPF₆) modified carbon paste electrode (CILE) as the basic electrode, NiMoO₄ nanorods and Hb composite biomaterial was further cast on the surface of CILE and fixed by chitosan (CTS) to establish a modified electrode denoted as CTS/NiMoO₄‐Hb/CILE. UV‐vis and FT‐IR spectroscopic results showed that Hb in the film retained its native structures without any conformational changes. Electrochemical behaviors of Hb entrapped in the film were carefully investigated by cyclic voltammetry with a pair of well‐defined and quasi‐reversible redox voltammetric peaks appearing in phosphate buffer solution (PBS, pH 3.0), which was attributed to the direct electrochemistry of the electroactive center of Hb heme Fe(III)/Fe(II). The results were ascribed to the specific characteristic of NiMoO₄ nanorods, which accelerated the direct electron transfer rate of Hb with the underlying CILE. The electrochemical parameters of Hb in the composite film were further carefully calculated with the results of the electron transfer number (n) as 1.08, the charge transfer coefficient (α) as 0.39 and the electron‐transfer rate constant (k_s) as 0.82 s^?1. The Hb modified electrode showed good electrocatalytic ability toward the reduction of trichloroacetic acid (TCA) in the concentration range from 0.2 to 26.0 mmol/L with a detection limit of 0.072 mmol/L (3σ), and H₂O₂ in the concentration range from 0.1 to 426.0 µmol/L with a detection limit of 3.16×10^?8 mol/L (3σ).     

Fabrication of Hemoglobin/Ionic Liquid Modified Carbon Paste Electrode Based on the Electrodeposition of Gold Nanoparticles/CdS Quantum Dots and Its Electrochemical Application

A novel H₂O₂ amperometric biosensor based on the electrodeposition of gold nanoparticles (AuNPs) and CdS quantum dots (CdS QDs) onto a carbon paste electrode (CPE) and immobilizing hemoglobin (Hb) with ionic liquid (IL), is presented in this article. The modification process of the electrode was monitored by scanning electron microscopy (SEM), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Due to synergistic effects of AuNPs, CdS QDs and IL, the biosensor exhibited high stability and good bioelectrocatalytic ability to H₂O₂ with a linear concentration range from 10 to 750 µM and a detection limit of 4.35 µM (S/N=3).     

A Long‐Life Lithium Ion Battery with Enhanced Electrode/Electrolyte Interface by Using an Ionic Liquid Solution

In this paper, we report an advanced long‐life lithium ion battery, employing a Pyr₁₄TFSI‐LiTFSI non‐flammable ionic liquid (IL) electrolyte, a nanostructured tin carbon (Sn‐C) nanocomposite anode, and a layered LiNi_1/3Co_1/3Mn_1/3O₂ (NMC) cathode. The IL‐based electrolyte is characterized in terms of conductivity and viscosity at various temperatures, revealing a Vogel–Tammann–Fulcher (VTF) trend. Lithium half‐cells employing the Sn‐C anode and NMC cathode in the Pyr₁₄TFSI‐LiTFSI electrolyte are investigated by galvanostatic cycling at various temperatures, demonstrating the full compatibility of the electrolyte with the selected electrode materials. The NMC and Sn‐C electrodes are combined into a cathode‐limited full cell, which is subjected to prolonged cycling at 40 °C, revealing a very stable capacity of about 140 mAh g^?1 and retention above 99 % over 400 cycles. The electrode/electrolyte interface is further characterized through a combination of electrochemical impedance spectroscopy (EIS) and scanning electron microscopy (SEM) investigations upon cell cycling. The remarkable performances reported here definitively indicate that IL‐based lithium ion cells are suitable batteries for application in electric vehicles.