Sequential Injection Lab‐on‐Valve Procedure for the Determination of Amantadine Using Potentiometric Methods

Amantadine potentiometric detectors were developed, evaluated and incorporated in a SIA‐LOV manifold in order to accomplish the control of pharmaceutical formulations and urine. The electrodes incorporate α‐cyclodextrin as ionophore, dibutyl phthalate or 2‐fluorophenyl 2‐nitrophenyl ether as plasticizers and potassium tetrakis[3,5‐bis‐(trifluoromethyl)phenyl]borate (KTFPB) as cationic additive. The slope increased from 61.2 to 63.8 mV decade^?1 and the practical limit of detection from 2.6×10^?6 mol L^?1 to 2.5×10^?5 mol L^?1 when the plasticizer was changed from 2‐fluorophenyl 2‐nitrophenyl ether to dibutyl phthalate. When incorporated in the flow‐manifold the membranes composed by dibutyl phthalate or with 2‐fluorophenyl 2‐nitrophenyl ether presented slopes and a practical limit of detection of 69.8 mV decade^?1 and 1.5×10^?4 mol L^?1 or 73.7 mV decade^?1 and 5.4×10^?5 mol L^?1, respectively. The electrode presented stable responses for over a year, and were highly selective concerning the representative species of the two sample matrices assayed as interferents. Comparison of obtained results with those provided by reference methods and recovery assays, revealed adequate accuracy for control assays.     

Potentiometric PVC membrane sensor for the determination of phenylephrine hydrochloride in some pharmaceutical products

A new PVC membrane electrode for the determination of phenylephrine hydrochloride based on the formation of an ionassociation complex of phenylephrine hydrochloride with the phosphotungstate counter anion as an electroactive material dispersed in a PVC matrix is described. The sensor shows a fast, stable, near-Nernstian response for 1.0 × 10^?5 to 1.0 × 10^?1 M phenylephrine hydrochloride at 25 °C over the pH range of 3.5–8.0 with a cationic slope of 58.1 ± 0.6 mV decade^?1. The electrode was successfully used for potentiometric determination of phenylephrine hydrochloride in some pharmaceutical drugs.     

Novel Polymeric Membrane Sensors Based on Mn(III) Porphyrin and Co(II) Phthalocyanine Ionophores for Batch and Flow Injection Determination of Azide

Two novel potentiometric azide membrane sensors based on the use of manganese(III)porphyrin [Mn(III)P] and cobalt(II)phthalocyanine [Co(II)Pc] ionophores dispersed in plasticized poly(vinyl chloride) PVC matrix membranes are described. Under batch mode of operation, [Mn(III)P] and [Co(II)Pc] based membrane sensors display near‐ and sub‐Nernstian responses of ?56.3 and ?48.5 mV decade^?1 over the concentration ranges 1.0×10^?2?2.2×10^?5 and 1.0×10^?2?5.1×10^?5 mol L^?1 azide and detection limits of 1.5×10^?5 and 2.5×10^?5 mol L^?1, respectively. Incorporation of both membrane sensors in flow‐through tubular cell offers sensitive detectors for flow injection (FIA) determination of azide. The intrinsic characteristics of the [Mn(III)P] and [Co(II)Pc] based detectors in a low dispersion manifold show calibration slopes of ?51.2 and ?33.5 mV decade^?1 for the concentration ranges of 1.0×10^?5?1.0×10^?2 and 1.0×10^?4?1.0×10^?2 mol L^?1 azide and the detection limits are1.0×10^?5 and 3.1×10^?5 mol L^?1, respectively. The detectors are used for determining azide at an input rate of 40–60 samples per hour. The responses of the sensors are stable within ±0.9 mV for at least 8 weeks and are pH independent in the range of 3.9?6.5. No interferences are caused by most common anions normally associated with azide ion.     

Lead(II) Potentiometric Sensor Based on 1,4,8,11‐Tetrathiacyclotetradecane Neutral Carrier and Lipophilic Additives

A potentiometric sensor for lead(II) ions based on the use of 1,4,8,11‐tetrathiacyclotetradecane (TTCTD) as a neutral ionophore and potassium tetrakis‐(p‐chlorophenyl)borate as a lipophilic additive in plasticized PVC membranes is developed. The sensor exhibits linear potentiometric response towards lead(II) ions over the concentration range of 1.0×10^?5–1.0×10^?2 mol L^?1 with a Nernstian slope of 29.9 mV decade^?1 and a lower limit of detection of 2.2×10^?6 mol L^?1 Pb(II) ions over the pH range of 3–6.5. Sensor membrane without a lipophilic additive displays poor response. The sensor shows high selectivity for Pb(II) over a wide variety of alkali, alkaline earth and transition metal ions. The sensor shows long life span, high reproducibility, fast response and long term stability. Validation of the method by measuring the lower limit of detection, lower limit of linear range, accuracy, precision and sensitivity reveals good performance characteristics of the proposed sensor. The developed sensor is successfully applied to direct determination of lead(II) in real samples. The sensor is also used as an indicator electrode for the potentiometric titration of Pb(II) with EDTA and potassium chromate. The results obtained agree fairly well with data obtained by AAS.     

A Novel Potentiometric Membrane Sensor Based on Aryl Palladium Complex for Selective Determination of Thiocyanate in the Saliva and Urine of Cigarette Smokers

A highly selective potentiometric sensor for thiocyanate ion based on the use of a newly synthesized organo‐palladium ion exchanger complex dispersed in a plasticized poly(vinyl chloride) membrane is described. The sensor displays a Nernstian response (?57.8±0.2 mV decade^?1) over a wide linear concentration range of thiocyanate (1.0×10^?6–1.0×10^?1 mol L^?1 ), low detection limit (6.3×10^?7 mol L^?1), fast response (20 s), stable potential readings (±0.4 mV), good reproducibility (±0.9%), long term stability (8 weeks), high precision (±0.7%) and applicability over a wide pH range (4–10). Negligible interferences are caused by F^?, Cl^?, I^?, Br^?, NO₃^?, NO₂^?, CN^?, SO₄^2?, S₂O₃^2?, PO₄^3?, citrate, acetate and oxalate ions. Under hydrodynamic mode of operation (FIA), the calibration slope is ?51.1±0.1 mV decade^?1, the linear response range is 1.0×10^?5–1.0×10^?1 mol L^?1 SCN^? and the sample throughput is 40–45 per hour. The sensor is satisfactory used for manual and flow injection potentiometric determination of SCN^? in the saliva and urine of cigarette smokers and non smokers. The data agree fairly well with results obtained by the standard spectrophotometric technique. Direct potentiometry and potentiometric titration of SCN^? with Ag⁺ are also monitored with the sensor.     

All-solid-state Cr(III)-selective potentiometric sensor based on Cr(III)-imprinted polymer nanomaterial/MWCNTs/carbon nanocomposite electrode

A novel potentiometric sensor, based on carbon paste electrode (CPE), modified with ion-imprinted polymer (IIP) and multi-walled carbon nanotubes (MWCNTs), is introduced for detection of chromium (III). The IIP nanomaterial was synthesised and characterised by using scanning electron microscopy and Fourier Transform Infrared. The modification of the CPE with the IIP (as a ionophore) resulted in an all-solid-state Cr(III)-selective sensor. However, the presence of appropriate amount of MWCNTs in the electrode composition was found to be necessary to observe Nernstian response. The optimised electrode composition was 76.7% graphite, 14.3% binder, 5% IIP, and 4% CNT. The proposed sensor exhibited Nernstian slope of 20.2 ± 0.2 mV decade^?1 in the working concentration range of 1.0 × 10^?6?1.0 × 10^?1 mol L^?1 (52 µg L^?1–5.2 g L^?1), with a detection limit of 5.9 × 10^?7 mol L^?1 (30.68 µg L^?1) and a fast response time of less than 40 s. It displayed a stable potential response in the pH range of 2–5. It exhibited also high selectivity over some interfering ions. The proposed sensor was successfully applied for the determination of Cr(III) in real samples (sea, river water and soil).     

Chemical Modified Carbon Paste Electrode for Potentiometric Determination of Mo(VI) and its Application in Food Analysis and Agriculture Fertilizers

Since to the best of our knowledge, there is no potentiometric sensors based on carbon paste electrodes were proposed for the potentiometric determination of molybdenum(VI) ion. In this study, 2,2′-(propane-1,3-diylbis(oxy))dibenzoic acid (PBODBA) was synthesized and used as modifier in the fabrication of carbon paste electrode (CPE) for the quantification of molybdenum(VI). The developed electrodes I and II showed hexavalent Nernstian response of 9.80±0.05 and 9.90±0.08 mV decade⁻¹ over the concentration ranges of 1.0×10⁻⁷–1.0×10⁻³ and 1.0×10⁻⁸–1.0×10⁻³ mol L⁻¹, respectively. The electrodes showed good selectivity for Mo(VI). The modified electrodes were applied for the determination of Mo(VI) concentration in masscuaje agricultural fertilizer and spiked juice extractions containing several metals.     

Highly Selective Potentiometric Sensor for Determining Phenazopyridine Hydrochloride in Biological Fluids Using N,N′-(Pyromellitoyl)-bis-L-tyrosine Dimethyl Ester

A new membrane selective electrode based on the potentiometric method was developed for the determination of phenazopyridine. The membrane signal is based on the interaction of N,N′-(pyromellitoyl)-bis-L-tyrosine dimethyl ester with phenazopyridine. The sensor displays a linear response with a slope of 61.1 mV decade^?1 for phenazopyridine concentrations in the range of 1.0 × 10^?2–1.0 × 10^?5 mol L^?1 and with detection limit of 8.0 × 10^?6 mol L^?1 of phenazopyridine. The electrode enjoys a fast response time. Application of this potentiometric sensor for phenazopyridine determination in pharmaceuticals, urine, and blood serum samples is reported without any special pretreatment required.     

Potentiometric Study of Coated Graphite Electrode and Polymeric Membrane Electrode for the Determination of Sm3+ Ion

Preliminary studies on the two Schiff bases N2‐((3H‐indol‐3‐yl)methylene)‐6‐phenyl‐1,3,5‐triazine‐2,4‐diamine (L₁) and N2,N4‐bis((3H‐indol‐3‐yl)methylene)‐6‐phenyl‐1,3,5‐triazine‐2,4‐diamine (L₂) have shown that they can act as Sm³⁺ selective electrodes. The performances of a polymeric membrane electrode and a coated graphite electrode based on L₂ were compared and the CGE proved to be better, as it shows a low detection limit of 1.8×10^?8 mol L^?1, a Nernstian slope of 19.6±0.4 mV decade^?1 of activity with a response time of 11 s in the pH range of 3.0–9.0. The CGE was used to determine Sm³⁺ in medicinal plants and soil samples. It was also used to determine fluoride ions in mouthwash samples and in toothpaste.     

Anionic surfactant selective electrode for the titrimetric determination of anionic surfactant

The construction and characteristic performance of a PVC membrane electrode responsive for sodium dodecylsulfate (SDS) are described in this paper. The electrode based on CTA⁺DS^? ion pair as ionophore in PVC membrane displays a Nernstian slope of ?58.8 ± 0.7 mV/decade in a 1.32 × 10^?6 to 3.75 × 10^?3 mol L^?1 concentration range and a limit of detection of 1.13 × 10^?6 mol L^?1. The electrode can be used for 3 months without showing significant changes in the value of slope or working range. The electrode has been utilized as an end point indicator electrode for potentiometric titration involving Hyamine as titrant. More than 100 titrations were carried out for the evaluation of the electrode parameters: the standard deviations of the equivalent volume and the equivalent potential, the height of the potential jump and the number of faulty titrations. The behavior of the electrode was assessed with regard to their usefulness in routine analysis.     

Self‐Assembled Mercapto‐Compound‐Gold‐Nanoparticle‐Modified Carbon Paste Electrode for Potentiometric Determination of Cadmium(II)

A new modified carbon paste electrode (CPE) based on a recently synthesized ligand [2‐mercapto‐5‐(3‐nitrophenyl)‐1,3,4‐thiadiazole] (MNT), self‐assembled to gold nanoparticles (GNP) as suitable carrier for Cd(II) ion with potentiometric method are described. The proposed electrode exhibits a Nernstian slope of 29.4±1.0 mV per decade for Cd(II) ion over a wide concentration range from 3.1×10^?8 to 3.1×10^?4 mol L^?1. The detection limit of electrode was 2.0×10^?8 mol L^?1 of cadmium ion. The potentiometric responses of electrode based on MNT is independent of the pH of test solution in the pH range 2.0–4.0. It has quick response with response time of about 6 s. The proposed electrode show fairly good selectivity over some alkali, alkaline earth, transition and heavy metal ions. Finally, the proposed electrode was successfully employed to detect Cd(II) ion in hair and water samples.     

Design of a Vitamin B1‐Selective Electrode Based on an Ion‐Pair and Its Application to Pharmaceutical Analysis

Vitamin B₁‐selective electrodes with PVC membrane were developed that contain ion associates of vitamin B₁ with an inorganic anion, BiI₄^?, and an organic anion, brilliant yellow, as electrode‐active substances. The linearity ranges of the electrode function are 1.0×10^?5–1.0×10^?2 and 1.0×10^?4–1.0×10^?2 M, the electrode function slopes are 33.0±1.0 and 33.1±1.1 mV decade^?1, the detection limits are 5.5×10^?6 and 8.3×10^?5 M for BiI₄^? and brilliant yellow respectively. The working range of pH is 5–12. The efficiency of the use of electrodes for the vitamin B₁ content control in multivitamin pharmaceutical preparations was shown by direct potentiometry and potentiometric titration methods.     

Man‐Tailored Biomimetic Sensor of Molecularly Imprinted Materials for the Potentiometric Measurement of Rivastigmine in Tablets and Biological Fluids and Employing the Taguchi Optimization Methodology to Optimize the MIP‐Based Membranes

This work proposes a novel biomimetic sensor for the potentiometric transduction of rivastigmine based on molecularly imprinted polymer (MIP). Using the Taguchi method, this study analyzed the optimum conditions for preparing the MIP‐based membranes. The rank order of each controllable factor was also determined. MIP‐based membranes exhibited a Nernstian response (30.7±1.1 mV decade^?1) in a concentration range from 1.0×10^?5 to 1.0×10^?2 mol L^?1 with a LOD of 6.3×10^?6 mol L^?1. The sensor was successfully applied to the determination of rivastigmine concentrations in human serum, plasma, urine, rat brain and tablets.     

Lanthanum-selective sensors based on 3-amino-2-mercapto-3H-quinazolin-4-one in PVC matrix

A new solvent polymeric membrane (PME) and coated graphite (CGE) electrodes based on 3-amino-2-mercapto-3H-quinazolin-4-one as a suitable carrier for La(III) ion are described. The sensors exhibited a Nernstian response for La(III) ion over a wide concentration range (3.0 × 10^?7 to 1.0 × 10^?1 M for PME and 1.0 × 10^?7 to 1.0 × 10^?1 M for CGE) with a slope of 20.1 ± 0.3 (PME) and 23.4 ± 0.4 (CGE) mV decade^?1. The lower detection limits by PME and CGE were 2.0 × 10^?7 and 7.1 × 10^?8 M, respectively. The potentiometric response of the proposed electrodes was independent of the pH of the test solution in the pH range 3.0–9.0 with a fast response time (<10 s). The applications of prepared sensors were demonstrated in the determination of lanthanum ions in spiked water sample and also utilized for indirect determination of fluoride content of two mouth wash preparation samples.     

Flow‐Through Potentiometric Sensors for Alizarin Red S Dye and Their Application for Aluminum Determination

Novel selective and sensitive poly (vinyl chloride) membrane sensors are developed for measuring alizarin red S (AR) based on the use of aliquate 336, Mg^IIphthalocyanine (MgPc), Cu^IIphthalocyanine (CuPc) and Fe^II phthalocyanine (FePc) plasticized poly (vinyl chloride) membrane. The sensors display Nernestian response with slopes of ‐50.6 ± 0.6 , ‐37.4 ± 0.5 , ‐37.7 ± 0.8 and ‐35.0 ± 0.7 mV decade^?1 over the range of 5.2 × 10^?6 to 1 × 10^?2 mol L^?1 for all of them and detection limits of 5.9 × 10^?7, 1.9 × 10‐^?6 2.3 × 10^?6 and 1.9 × 10^?6 mol L^?1 for aliquate, MgPc, CuPc and FePc membrane based sensor, respectively. The sensors exhibit long life span, long term potential stability, high reproducibility, fast response and good discrimination ability towards alizarinate ion in comparison with many other anions. A tubular detector based on aliquate, MgPc, CuPc and FePc was further developed and coupled to a flow‐injection system for alizarin (AR) determination. Under optimized conditions, the linearity range is 1.0 × 10^?5‐ 1.0 × 10^?1 mol L^?1, with a slope of ‐52.1 ± 0.8, 20.9 ± 0.7, 23.6 ± 0.4 and 25 ± 1.1 mV decade^?1 and a reproducibility of ± 0.8 mV (n = 6) for aliquate, MgPc, CuPc and FePc membrane based sensors, respectively. The sensor based on aliquate is further utilized for a potentiodynamic quantification of aluminum in sludge samples and deodorants. The buffered solution of alizarin was allowed to react in a flow system with aluminum. The calibration curve of Al was found to be linear over a concentration range of 0.1 to 1.8 and 1.0 ‐ 40 μg mL^?1 with a slope = 16.9 (r² = 0.993) and 1.76 (r² = 0.994) mV (μg/mL)^?1 and a detection limit of 0.08 and 0.5 μg mL^?1 for 10^?4 and 10^?3 mol L^?1 AR^? as a carrier, respectively. The method was successfully used for determining aluminum in sludge samples and deodorants. The data agree fairly well the nominal values and with results obtain by continuous flow hydride generation inductively coupled plasma (ICP) method.     

A Potentiometric Sensor for Determination of Doxycycline Hydrochloride in Pharmaceutical Preparation and Biological Fluids

This article focused on the construction and characteristics of novelty and sensitivity of modified carbon paste electrodes for determination of doxycycline hydrochloride (DC.HCl) in urine, serum and pharmaceutical preparations. It was based on the incorporation of α-cyclodextrine (α-CD) and multi-walled carbon nanotube (MWCNT) ionophores which improved the characteristics of the electrodes with tricresylphosphate (TCP) (electrode I) and o-nitrophenyloctylether (o-NPOE) (electrode II) as plasticizers, respectively. The constructed electrodes, at optimum paste composition, exhibited good Nernstian response for determination of doxycycline hydrochloride over a linear concentration range from 1.0 × 10^–7 to 1.0 × 10^–2 and 1.22 × 10^–7 to 1.0 × 10^–2 mol L^–1 with detection limit of 1.0 × 10–7 and 1.22 ×10^–7 mol L^–1 and with slope values of (58.7 ± 0.2) mV decade–1 and (58.0 ± 0.6) mV decade–1, for modified carbon paste electrodes (MCPEs; electrodes I and II), respectively. The results showed fast dynamic response time (about 6–7 s) and long lifetime in the range from 4 to 5 months where the response of the electrodes was not affected by pH variation within the range from 2 to 8 and 2 to 7.5 for electrodes I and II, respectively. Electrodes I and II showed high selectivity for doxycycline hydrochloride with respect to a large number of interfering species including foreign inorganic, organic species, excipients and the fillers added to the pharmaceutical preparation. The constructed electrodes were successfully applied for determination of DC.HCl in pure form, its pharmaceutical preparations and biological fluids (urine and serum) using standard addition, calibration curves and potentiometric titration methods. The results obtained using these potentiometric electrodes were comparable with those obtained using official method. The results were satisfactory with excellent percentage recovery comparable or better than those obtained by other routine methods.

     

Development of Polymeric Membrane Sensor for the Determination of Histamine: Experimental and Theoretical Study

Abstract

Some original histamine membrane sensors were prepared by incorporating thiopyrilium (TP) derivative as an excellent charged carrier. Among these sensors, TP2 shows the best response to histamine in a wide concentration range from 2.5×10^?6 to 1.0×10^?1 mol L^?1 with a slope of 55.6±0.7 mV decade^?1 and with a detection limit of 1.0 µmol L^?1 (～0.1 ppm). The interference between histamine and several amino acids and common inorganic anions was negligible as shown by the potentiometric selectivity coefficient data. The prepared electrode was used for the determination of histamine in a human serum synthetic sample. Theoretical calculations were carried out to find the best interactions between histamine and different ligands.     

Fabrication of chemically modified carbon paste electrode based on functionalized biopolymer for potentiometric determination of Al (III) ion in real water and pharmaceutical samples

Carbon paste electrode modified with Carboxymethyl chitosan-graft-poly(1-cyanoethanoyl-4-acryloyl-thiosemcarbazide)copolymers(CMCS-PCEATS) as ionophore was constructed for potentiometric determination of aluminum (III) and the chelation between the ionophore and the aluminum (III) ions at the electrode surface was characterized using SEM, EDX, and IR analysis. Thermal stability of the prepared electrode before and after chelation with the metal ion was investigated. The highest performance was obtained with the electrode modified with 10 mg of the prepared copolymers plasticized with TCP (electrode I). Under the optimized provision, the electrode I shows Nernstian slope of 19.9?±?0.36 mV decade^??1 over the concentration range from 1.0?×?10^??6 to 1.0?×?10^??2 mol L^??1 with a detection limit of 1.0?×?10^??6 mol L^??1 and pH ranges from 3 to 8. The paste is enough stable for 37 days without any detected change in the potential. The proposed method is more potent in determination of Al(III) in both real water and pharmaceutical samples potentiometrically. The results obtained agreed with those obtained with spectrophotometer and inductive coupled plasma (ICP).     

Study of a Novel Bisnaphthalimidopropyl Polyamine as Electroactive Material for Perchlorate‐selective Potentiometric Sensors

In this work, the new polyamine bisnaphthalimidopropyl‐4,4’‐diaminodiphenylmethane is proposed as a new ionophore for perchlorate potentiometric sensors. The optimal formulation for the membrane comprised of 12 mmol kg^?1 of the ionophore, and 68 % (w/w) of 2‐nitrophenyl phenyl ether as plasticizer and 31 % (w/w) of high molecular weight PVC. The sensors were soaked in water for a week to allow leakage of anionic impurities and for one day in a perchlorate solution (10^?4 mol L^?1) to improve reproducibility due to its first usage. The stability constant for the ionophore‐perchlorate association in the membrane, log β_IL1=3.18±0.04, ensured a performance characterized by the slope of 54.1 (±0.7) mV dec^?1 to perchlorate solutions with concentrations between 1.24×10^?7 and 1.00×10^?3 mol L^?1. The sensors are insensitive to pH between 3.5 to 11.0, they have a practical detection limit of 7.66 (±0.42) ×10^?8 mol L^?1 and a response time below 60 s for solutions with perchlorate concentrations above 5×10^?6 mol L^?1. The accuracy of the results was confirmed by the analysis of the contaminant in a certified reference water sample.     

Modified carbon paste electrode for potentiometric determination of aluminium ion in spiked real water sample

The present paper describes the development of a new chemically modified carbon paste electrode based on azithromycin (AMC) that considered as a selective aluminium recognition agent in the carbon paste electrode (CPE). This electrode was fully characterized in terms of composition, response time, usable pH range and temperature. The electrode exhibited a Nernstian response for Al³⁺ ion over a concentration range from 7.0 × 10^–6 to 1.0 × 10^–2 mol L^–1 with a slope of 21.3 ± 0.18 mV decade^–1 and the limit of detection was 6.0 × 10^–6 mol L^?1. It had a response time of about 6 s. The proposed sensor possesses a very good selectivity with respect to a variety of other cations. Finally this modified electrode was applied for the determination of the concentration of Al³⁺ ion in different water samples and the obtained results were comparable with those obtained with atomic absorption spectrometer (AAS).