Expanded bite angles in tridentate ligands. Improving the photophysical properties in bistridentate RuII polypyridine complexes

Bistridentate metal complexes as photosensitizers are ideal building blocks in the construction of rod-like isomer-free assemblies for intramolecular photoinduced charge separation. Approaches to obtain long-lived luminescent metal-to-ligand charge transfer excited states in bistridentate Ru^II polypyridine complexes via the manipulation of metal-centered state energies are discussed. Following an introduction to general strategies to prolong the excited state lifetimes, more recent work is explored in detail where tridentate ligands with expanded 2,2′:6′,2″-terpyridine cores are utilized. The synthesis of these tridentate ligands and their corresponding Ru^II complexes is covered. Bistridentate Ru^II complexes with microsecond metal-to-ligand charge transfer excited state lifetimes are described, and are used in electron donor–photosensitizer–electron acceptor assemblies for efficient vectorial photoinduced charge separation.     

Vectorial photoinduced electron transfer in alternating Langmuir–Blodgett films of phytochlorin–[60]fullerene dyad and regioregular poly(3-hexylthiophene)

Alternating Langmuir–Blodgett (LB) bilayer structures, consisting of a donor–acceptor (DA) layer of a phytochlorin–fullerene (PF) dyad and a layer of a regioregular poly(3-hexylthiophene) (PHT) polymer were used to study interlayer vectorial photoinduced electron transfer (VPET). As the dyad PF undergoes, under light illumination, an intramolecular ET from the phytochlorin to the fullerene moiety an intralayer VPET takes place in the LB monolayer. When PF was deposited on the PHT layer and excited the second ET took place from the PHT layer to the phytochlorin cation. Thus the PHT layer can act as a secondary electron donor and accompany the primary photoinduced electron transfer in the PF layer by a spontaneous interlayer electron transfer. Important characteristic properties of the VPET bilayer are the longer distance of charge separation (CS) and the longer lifetime of the charge separated state (lifetime from microsecond to second) as compared to VPET of the PF monolayer alone (where the lifetime of CS state was ≈30 ns). The CT measurements were carried out for different molecular orientations and film structures. Models for the multistep photochemical reactions are discussed.     

Novel fused D-A dyad and A-D-A triad incorporating tetrathiafulvalene and p-benzoquinone

Novel fused donor-acceptor dyad (TTF-Q or D-A) and acceptor-donor-acceptor triad (Q-TTF-Q or A-D-A) incorporating the donor tetrathiafulvalene (TTF) and the acceptor p-benzoquinone (Q) have been synthesized. The solution UV-vis spectra of these molecules display a low-energy absorption band that is attributed to an intramolecular charge transfer between both antagonistic units. The presence of reversible oxidation and reduction waves for the donor and acceptor moieties was shown by cyclic voltammetry, in agreement with the ratio TTF/quinone(s) units. The successive generation from these compounds of the cation radical and anion radical obtained upon (electro)chemical oxidation and reduction, respectively, was monitored by optical and ESR spectroscopies. The anion radical Q-TTF-Q(-.) triad was demonstrated to be a class II mixed-valence system with the existence of a temperature-dependent intramolecular electron transfer. The crystallographic tendency of these fused systems to overlap in mixed stacks of alternating A-D-A units is also discussed.     

Photoelectrodes based on acceptor–donor assemblies in functionalized polypyrrole films

The capability to act as molecular photoelectrodes under visible light irradiation of optically transparent electrodes (ITO) modified by thin films of polypyrrole containing several kind of electron acceptor–donor assemblies has been examined. Photolysis of electrodes coated by thin films of polypyrrole substituted by a reversible electron donor (phenothiazine) in the presence of an irreversible electron acceptor (tropylium cation) in acetonitrile gives weak photocurrents. In contrast, appreciable photocurrents can be obtained using a symmetrical arrangement; viologen as reversible electron acceptor, benzilate anion as irreversible donor. The photoresponses result from the photo-induced charge separation of the charge transfer complexes created in the film. The measured photocurrents are markedly larger (up to five times), with films of polypyrrole substituted by a reversible electron acceptor (viologen) covalently linked with a donor (phenothiazine, triphenylamine or benzidine) than with the unimolecular immobilized system in similar experimental conditions. The greater efficiency of these materials is attributed to the formation of an intramolecular charge transfer complex occurring inside films between the two molecular entities. Markedly weaker photocurrents are obtained with polypyrrole films based on bilayers of the two independent components than those with the unimolecular design, while films based on copolymers arrangements give moderately weaker photoresponses.     

D-A型共轭低聚物的电子性质及D-A比对其影响的理论研究

以[1,2,5]噻重氮并[3,4-g]喹喔啉(TQ)为受体、 噻吩(Th)、 噻吩并[3,2-b]噻吩(TTh)和吡咯(Py)为供体, 设计了6类供体-受体(D-A)型共轭低聚物. 采用杂化的密度泛函方法(B3LYP), 研究了此6类低聚物的电子结构和性质. 电子密度拓朴分析和核独立化学位移计算表明, 随着聚合度的增加, 体系共轭程度增强, HOMO-LUMO能级差逐渐减小. 同时, 随着聚合度的增加, 低聚物电离能减小, 电子亲和势增大. 供体-受体摩尔比(D-A比)对低聚物的性质有重要影响, 提高D-A比能有效地增大分子内电荷迁移, 从而使HOMO-LUMO能级差减小. Py不仅是一个强的电子供体, 还是一个潜在的氢键供体. 在含Py结构单元的低聚物中, 由于分子内氢键的存在使其具有较大的分子内电荷迁移值. 所设计的6种基于TQ的四聚体均具有较小的HOMO-LUMO能级差(<1 eV), 使其相应的聚合物的能隙更小, 可作为潜在的性能优良的导电材料.     

Exciplex mediated photoinduced electron transfer reactions of phthalocyanine-fullerene dyads

Evidences of an intramolecular exciplex intermediate in a photoinduced electron transfer (ET) reaction of double-linked free-base and zinc phthalocyanine-C60 dyads were found. This was the first time for a dyad with phthalocyanine donor. Excitation of the phthalocyanine moiety of the dyads results in rapid ET from phthalocyanine to fullerene via an exciplex state in both polar and nonpolar solvents. Relaxation of the charge-separated (CS) state Pc(*+)-C60(*-) in a polar solvent occurs directly to the ground state in 30-70 ps. In a nonpolar solvent, roughly 20% of the molecules undergo transition from the CS state to phthalocyanine triplet state (3)Pc*-C60 before relaxation to the ground state. Formation of the CS state was confirmed with electron spin resonance measurements at low temperature in both polar and nonpolar solvent. Reaction schemes for the photoinduced ET reactions of the dyads were completed with rate constants obtained from the time-resolved absorption and emission measurements and with state energies obtained from the fluorescence, phosphorescence, and voltammetric measurements.     

Vibrational and quantum-chemical study of nonlinear optical chromophores containing dithienothiophene as the electron relay

A series of nonlinear optical (NLO) donor-acceptor (D-A) chromophores containing a fused terthiophene, namely dithienothiophene (DTT), as the electron relay, the same donor group, and acceptors of various strengths, has been investigated by means of infrared and Raman spectroscopies, both in the solid state as well as in a variety of solvents, to evaluate the effectiveness of the intramolecular charge transfer from the electron-donor to the electron-acceptor end groups. The Raman spectral profiles of these NLO-phores measured from their dilute solutions have been found to be rather similar to those of the corresponding solids, and thus their intramolecular charge transfer (ICT) shows very little dependence on the solvent polarity. The experimental results obtained for the DTT-containing NLO-phore with a 4-(N,N-dibutylamino)styryl end group as the donor and a 2,2-dicyanoethen-1-yl end group as the acceptor differ from those previously obtained for two parent "push-pull" chromophores with the same D-A pair but built-up around either a bis(3,4-ethylenedioxythienyl) (BEDOT) or a bithienyl (BT) electron relay. Vibrational spectroscopy shows that DTT is significantly more efficient as an electron relay than BT (which has the same number of conjugated C=C bonds) or BEDOT (which can be viewed as a rigidified version of BT on account of noncovalent intramolecular interactions between heteroatoms of adjacent rings). Density functional theory (DFT) calculations have also been performed on these NLO-phores to assign their main electronic and vibrational features and to obtain information about their structures. An additional merit of these molecular materials was revealed by the infrared spectra of the DTT-based NLO-phores recorded at different temperatures. Thus, spectra recorded between -170 and 150 degrees C did not show any substantial change, indicating that the materials have a high thermal stability, which is of significance for their use as active components in optoelectronic devices.     

Steric effect on fluorescence quenching

In this communication we have reported the steric effect on the fluorescence quenching rate constants of the electron transfer (ET) process. We have done a comparative study using donor (D)-acceptor (A) systems with different exergonicity (-deltaG(f)). Different carbazole derivatives (CZ): 1,4-dicyanobenzene (DCB) systems (-deltaG(f) = 0.7-0.8 eV) were found to be among those limiting systems that show a clear-cut steric dominance in the process of fluorescence quenching. It is known that with increasing exergonicity the ET distance increases and hence steric dependence becomes insignificant. On the other hand, with decreasing exergonicity the ET distance decreases and a pronounced steric dominance should be observed. However, in the D-A systems having lower exergonicity compared to CZ-DCB systems, this steric dominance is observed only in polar medium. In non-polar medium due to exciplex formation the D-A distance effectively becomes much longer and therefore no steric dominance is observed.     

Unified interpretation of exciplex formation and marcus electron transfer on the basis of two-dimensional free energy surfaces

The mechanism of exciplex formation proposed in a previous paper has been refined to show how exciplex formation and Marcus electron transfer (ET) in fluorescence quenching are related to each other. This was done by making simple calculations of the free energies of the initial (DA*) and final (D+A-) states of ET. First it was shown that the decrease in D-A distance can induce intermolecular ET even in nonpolar solvents where solvent orientational polarization is absent, and that it leads to exciplex formation. This is consistent with experimental results that exciplex is most often observed in nonpolar solvents. The calculation was then extended to ET in polar solvents where the free energies are functions of both D-A distance and solvent orientational polarization. This enabled us to discuss both exciplex formation and Marcus ET in the same D-A pair and solvent on the basis of 2-dimensional free energy surfaces. The surfaces contain more information about the rates of these reactions, the mechanism of fluorescence quenching by ET, etc., than simple reaction schemes. By changing the parameters such as the free energy change of reaction, solvent dielectric constants, etc., one can construct the free energy surfaces for various systems. The effects of free energy change of reaction and of solvent polarity on the mechanism and relative importance of exciplex formation and Marcus ET in fluorescence quenching can be well explained. The free energy surface will also be useful for discussion of other phenomena related to ET reactions.     

Charge recombination versus charge separation in donor-bridge-acceptor systems

Optimizing the ratio of the rates for charge separation (CS) over charge recombination (CR) is crucial to create long-lived charge-separated states. Mastering the factors that govern the electron transfer (ET) rates is essential when trying to achieve molecular-scale electronics, artificial photosynthesis, and also for the further development of solar cells. Much work has been put into the question of how the donor-acceptor distances and donor-bridge energy gaps affect the electronic coupling, V(DA), and thus the rates of ET. We present here a unique comparison on how these factors differently influence the rates for CS and CR in a porphyrin-based donor-bridge-acceptor model system. Our system contains three series, each of which focuses on a separate charge-transfer rate-determining factor, the donor-acceptor distance, the donor-bridge energy gap, and last, the influence of the electron acceptor on the rate for charge transfer. In these three series both CS and CR are governed by superexchange interactions which make a CR/CS comparative study ideal. We show here that the exponential distance dependence increases slightly for CR compared to that for CS as a result of the increased tunneling barrier height for this reaction, in accordance with the McConnell superexchange model. We also show that the dependence on the tunneling barrier height is different for CS and CR. This difference is highly dependent on the electron acceptor and thus cannot solely be explained by the differences in the frontier orbitals of the electron donor in these porphyrin systems.     

Guest-Responsive Reversible Electron Transfer in a Crystalline Porous Framework Supported by a Dynamic Building Node

We demonstrate a redox-active, crystalline donor–acceptor (D-A) assembly in which the electron transfer (ET) process can be reversibly switched. This ET process, induced by a guest-responsive structural transformation at room temperature, is realized in a porous, metal–organic framework (MOF), having anthracene (D)–naphthalenediimide (A) as struts. A control MOF structure obtained by a solvent-assisted linker exchange (SALE) method, replacing an acceptor strut with a neutral one, supported the switchable electronic states in the D-A MOF. Combined investigations with X-ray diffraction, spectroscopy, and theoretical analyses revealed the dynamic metal paddle-wheel node as a critical unit for controlling structural flexibility and the corresponding unprecedented ET process.     

Influence of the environment on photoinduced electron transfer: comparison between organized monolayers at the air-water interface and monolayer assemblies on glass

Photoinduced electron transfer (PET) has been investigated in organized monolayers at the air-water interface and in monolayer assemblies on glass in an effort to evaluate the influence of solvent reorganization and molecular dynamics on PET. The donor monolayer contained an amphiphilic thiacyanine dye, and the electron acceptors were methyl viologen and dioctadecyl viologen, respectively. The distance dependence is described here by a hard disk model, where an acceptor molecule within a disk with a radius rDA around the excited donor molecule quenches the donor fluorescence due to electron transfer. Acceptor molecules outside the disk are considered ineffective. The critical radius rDA is larger in monolayer assemblies on glass (rDA = 1.97 nm) than at the air-water interface (rDA = 1.15 nm) as evaluated from steady-state fluorescence quenching. This large difference indicates that the time between thermal collisions generating and destroying the energetic match required for electron tunneling from the excited donor molecule to the acceptor is quite different in the two systems that are compared.     

供体-受体型共轭聚合物电子结构和导电性能的理论设计

以苯并[1,2-c:4,5-c']二[1,2,5]噻重氮和吡嗪并[2,3-g]喹喔啉为电子受体(A),噻吩、噻吩并[3,2-b]噻吩和二噻吩并[2,3-b:2',3'-d]噻吩为电子供体(D),设计了6种D-A型共轭聚合物.采用B3LYP方法,研究了这6种聚合物的几何结构和电子性质.D-A型共轭聚合物的几何结构和电子结构与电子供体和电子受体的性质,特别是与其提供电子和接受电子的能力密切相关.聚合物的能隙主要受键长交替控制,键长交替越小,能隙越窄.所设计的6种聚合物中,p-BBT-TT具有较窄的能隙(0.48 eV)、较小的载流子有效质量和相对较大的能带宽度,具备理论上的良好导电性能,可能是潜在的优良导电聚合物材料.     

Differential tuning of the electron transfer parameters in 1,3,5-triarylpyrazolines: a rational design approach for optimizing the contrast ratio of fluorescent probes

A large class of cation-responsive fluorescent sensors utilizes a donor-spacer-acceptor (D-A) molecular framework that can modulate the fluorescence emission intensity through a fast photoinduced intramolecular electron transfer (PET) process. The emission enhancement upon binding of the analyte defines the contrast ratio of the probe, a key property that is particularly relevant in fluorescence microscopy imaging applications. Due to their unusual electronic structure, 1,3,5-triarylpyrazoline fluorophores allow for the differential tuning of the excited-state energy DeltaE(00) and the fluorophore acceptor potential E(A/A(-)), both of which are critical parameters that define the electron transfer (ET) thermodynamics and thus the contrast ratio. By systematically varying the number and attachment positions of fluoro substituents on the fluorophore pi-system, DeltaE(00) can be adjusted over a broad range (0.4 eV) without significantly altering the acceptor potential E(A/A(-)). Experimentally measured D-A coupling and reorganization energies were used to draw a potential map for identifying the optimal ET driving force that is expected to give a maximum fluorescence enhancement for a given change in donor potential upon binding of the analyte. The rational design strategy was tested by optimizing the fluorescence response of a pH-sensitive probe, thus yielding a maximum emission enhancement factor of 400 upon acidification. Furthermore, quantum chemical calculations were used to reproduce the experimental trends of reduction potentials, excited-state energies, and ET driving forces within the framework of linear free energy relationships (LFERs). Such LFERs should be suitable to semiempirically predict ET driving forces with an average unsigned error of 0.03 eV, consequently allowing for the computational prescreening of substituent combinations to best match the donor potential of a given cation receptor. Within the scaffold of the triarylpyrazoline platform, the outlined differential tuning of the electron transfer parameters should be applicable to a broad range of cation receptors for designing PET sensors with maximized contrast ratios.     

Electrochemically induced electron transfer through molecular bridges

In this Opinion, we address some of the most important results obtained electrochemically in the area of intramolecular electron transfer (ET). The focus is on freely diffusing molecular systems in which a donor D and an acceptor A are separated by a well-defined bridge B (D-B-A systems). B can be a saturated spacer, a delocalized bridge, or the more complex peptide backbones. As to the acceptors, the selected examples encompass species that can be charged reversibly but a special emphasis is on ETs associated with the concerted cleavage of a sigma bond (dissociative ETs). Our goal is to showcase the essential background, the most appropriate electrochemical tools and methodologies, and a series of selected examples where molecular electrochemistry has provided invaluable information on the mechanisms of intramolecular ET and electronic communication through bridges.     

Conformational gating of long distance electron transfer through wire-like bridges in donor-bridge-acceptor molecules

A series of five donor-bridge-acceptor (DBA) molecules in which the donor is tetracene, the acceptor is pyromellitimide, and the bridge molecules are oligo-p-phenylenevinylenes (OPV) of increasing length has been shown to undergo electron transfer (ET) by means of two mechanisms. When the bridge is short, strongly distance dependent superexchange dynamics dominates, whereas when the bridge is longer, bridge-assisted hopping dynamics prevails. The latter mechanism results in relatively soft distance dependence for ET in which the OPV oligomers act effectively as molecular wires. We now report studies on the critical influence that bridge dynamics have on electron transfer through these oligomers. The temperature dependence of the charge separation (CS) rates in all five molecules does not appear to obey the predictions of standard ET theories based upon the Condon approximation. All five molecules show behavior consistent with CS being "gated" by torsional motion between the tetracene donor and the first bridge phenyl ring. This is based on the near equivalence of the CS activation energies measured for all five molecules with the frequency of a known vibrational mode in 5-phenyltetracene. In the molecule containing a trans-stilbene bridge, a competition occurs between the tetracene-phenyl torsional motion and one that occurs between the vinyl group and the phenyls linked to it. This results in complex temperature-dependent CS that exhibits both activated and negatively activated regimes. The charge recombination (CR) reactions within the molecules which have the two shortest bridges, namely phenyl and trans-stilbene, show a weaker dependence on these molecular motions. The three molecules with the longest bridges all display complex temperature dependencies in both their rates of CS and CR, most likely because of the complex torsional motions, which arise from the multiple phenyl-vinyl linkages. The data show that long-distance electron transfer and therefore wire-like behavior within conjugated bridge molecules depend critically on these low-frequency torsional motions. Molecular device designs that utilize such bridges will need to address these issues.     

Directly Linked Zinc Phthalocyanine–Perylenediimide Dyads and a Triad for Ultrafast Charge Separation

Directly linked to promote strong intramolecular interactions, donor–acceptor dyads and a donor–acceptor–donor triad featuring zinc phthalocyanine (ZnPc) as electron donor and perylenediimide (PDI) as electron acceptor have been synthesized and characterized. Owing to complementary absorption features of the entities, improved light absorption was witnessed in these conjugates. The optimized geometry and electronic structures showed the majority of the highest occupied molecular orbital (HOMO) on the ZnPc entity, whereas the lowest unoccupied molecular orbital (LUMO) was on the PDI entity, suggesting that the charge-separated states would be ZnPc ⁺ –PDI ^{. −}. The electrochemical and free-energy calculations suggested exothermic energy and/or electron transfer processes via the singlet states of PDI or ZnPc entities depending on the excitation wavelength of the laser used. The measured rates using femtosecond pump-probe spectroscopy coupled with global analysis of transient data revealed ultrafast energy transfer from ¹PDI* to ZnPc followed by charge separation. However, when ZnPc was selectively excited, only electron transfer was witnessed wherein the time constants for forward and reverse electron transfer processes followed Marcus predictions. The absorption in a wide section of the solar spectrum and the ultrafast charge separation suggest the usefulness of these systems as good photosynthetic models.     

Distance dependence of electron transfer in rigid,cofacially compressed,pi-stacked porphyrin-bridge-quinone systems

The electron-transfer (ET) dynamics of a series of unusually rigid pi-stacked porphyrin-quinone (P-Q) systems, in which sub-van der Waals interplanar distances separate juxtaposed porphyryl, aromatic bridge, and quinonyl components of these assemblies, are reported. The photoinduced charge separation (CS) and thermal charge recombination (CR) ET reactions of [5-[8'-(2',5'-benzoquinonyl)-1'-naphthyl]-10,20-diphenylporphinato]zinc(II) (1a-Zn), [5-[8'-(4'-[8'"-(2'"',5'"'-benzoquinonyl)-1'"-naphthyl]-1'-phenyl)-1'-naphthyl]-10,20-diphenylporphinato]zinc(II) (2a-Zn), and [5-(8'-[4'-(8'"-[4'"'-(8'"-[2'"',5'"'-benzoquinonyl]-1'"-naphthyl)-1'"'-phenyl]-1'"-naphthyl)-1'-phenyl]-1'-naphthyl)-10,20-diphenylporphinato]zinc(II) (3a-Zn) in CH(2)Cl(2) were investigated by pump-probe transient absorption spectroscopy. Analyses of these data show that the phenomenological ET distance dependence (beta) for both the CS and CR reactions in these systems is soft (beta(CS) = 0.43 A(-1); beta(CR) = 0.35 +/- 0.16 A(-1)). This work demonstrates that simple aromatic building blocks such as benzene, which are characterized by highly stabilized filled molecular orbitals and large HOMO-LUMO gaps, can provide substantial D-A electronic coupling when organized within a pi-stacked structural motif that features a modest degree of arene-arene interplanar compression.     

Symmetry Effects in Photoinduced Electron Transfer in Chlorin-Quinone Dyads: Adiabatic Suppression in the Marcus Inverted Region

In donor–acceptor dyads undergoing photoinduced electron transfer (PET), a direction or pathway for electron movement is usually dictated by the redox properties and the separation distance between the donor and acceptor subunits, while the effect of symmetry is less recognized. We have designed and synthesized two isomeric donor–acceptor assemblies in which electronic coupling between donor and acceptor is altered by the orbital symmetry control with the reorganization energy and charge transfer exothermicity being kept unchanged. Analysis of the optical absorption and luminescence spectra, supported by the DFT and TD-DFT calculations, showed that PET in these assemblies corresponds to the Marcus inverted region (MIR) and has larger rate for isomer with weaker electronic coupling. This surprising observation provides the first experimental evidence for theoretically predicted adiabatic suppression of PET in MIR, which unambiguously controlled solely by symmetry.     

Charge transfer dynamics of donor-acceptor systems in solutions and sol-gel matrices

Charge transfer reactions are photoinduced by exciting with UV and visible light strongly coupled donor acceptor pairs. The systems investigated are composed either of porphyrin and phthalocyanine mixed dimers. In this case, the proton transfer competes with the electron transfer process.The results obtained in sol-gel matrices are compared to the ones in solutions and organized media, and discussed in terms of the effect of the confinement of the reactants and degree of organization of the environment on the efficiency of charge transfer reactions.