Binuclear magnesium amidoborane complexes: characterization of a trinuclear thermal decomposition product

The bis-β-diketimine with a meta-phenylene bridge (META-H(2): DIPPN(H)CMeCHCMeN-C(6)H(4)-NCMeCHCMeN(H)DIPP; DIPP = 2,6-iPr-C(6)H(3)) reacted with two equivalents of nBu(2)Mg to give the bis-β-diketiminate complex META-(MgnBu)(2). The latter binuclear magnesium complex was converted to META-[MgNH(iPr)BH(3)](2) by reaction with H(2)N(iPr)BH(3). The thermal decomposition of this binuclear iPr-substituted magnesium amidoborane complex has been investigated. In benzene it starts to eliminate H(2) at 90 °C. Two decomposition products could be obtained by fractional crystallization of the residue. The first product is the trinuclear magnesium complex META-Mg(3)[iPrNB(H)N(iPr)BH(3)](2) and the second product is (META-Mg)(2). These products have been formed by ligand exchange reactions of the expected complex META-Mg(2)[iPrNB(H)N(iPr)BH(3)] and were characterized by single crystal X-ray diffraction. The central Mg(2+) ion in META-Mg(3)[iPrNB(H)N(iPr)BH(3)](2) is not connected to the ligand system and its coordination geometry could be representative of that in a solid-state magnesium salt containing the RNB(H)N(R)BH(3)(2-) ion.     

Probing the catalytic potential of chloro nitrosyl rhenium(I) complexes

The reduction of the mononitrosyl Re(II) salt [NMe(4)](2)[ReCl(5)(NO)] (1) with zinc in acetonitrile afforded the Re(i) dichloride complex [ReCl(2)(NO)(CH(3)CN)(3)] (2). Subsequent ligand substitution reactions with PCy(3), PiPr(3) and P(p-tolyl)(3) afforded the bisphosphine Re(i) complexes [ReCl(2)(NO)(PR(3))(2)(CH(3)CN)] (3, R = Cy a, iPr b, p-tolyl c) in good yields. The acetonitrile ligand in 3 is labile, permitting its replacement with H(2) (1 bar) to afford the dihydrogen Re(I) complexes [ReCl(2)(NO)(PR(3))(2)(η(2)-H(2))] (4, R = Cy a, iPr b). The catalytic activity of 2, 3 and 4 in hydrogen-related catalyses including dehydrocoupling of Me(2)NH·BH(3), dehydrogenative silylation of styrenes, and hydrosilylation of ketones and aryl aldehydes were investigated, with the main focus on phosphine and halide effects. In the dehydrocoupling of Me(2)NH·BH(3), the phosphine-free complex 2 exhibits the same activity as the bisphosphine-substituted systems. In the dehydrogenative silylation of styrenes, 3a and 4a bearing PCy(3) ligands exhibit high catalytic activities. Monochloro Re(I) hydrides [Re(Cl)(H)(NO)(PR(3))(2)(CH(3)CN)] (5, R = Cy a, iPr b) were proven to be formed in the initiation pathway. The phosphine-free complex 2 showed in dehydrogenative silylations even higher activity than the bisphosphine derivatives, which further emphasizes the importance of a facile phosphine dissociation in the catalytic process. In the hydrosilylation of ketones and aryl aldehydes, at least one rhenium-bound phosphine is required to ensure high catalytic activity.     

Calcium–Amidoborane–Ammine Complexes: Thermal Decomposition of Model Systems

Hydrocarbon‐soluble model systems for the calcium–amidoborane–ammine complex Ca(NH₂BH₃)₂ ? (NH₃)₂ were prepared and structurally characterized. The following complexes were obtained by the reaction of RNH₂BH₃ (R=H, Me, iPr, DIPP; DIPP=2,6‐diisopropylphenyl) with Ca(DIPP‐nacnac)(NH₂) ? (NH₃)₂ (DIPP‐nacnac=DIPP? NC(Me)CHC(Me)N? DIPP): Ca(DIPP‐nacnac)(NH₂BH₃) ? (NH₃)₂, Ca(DIPP‐nacnac)(NH₂BH₃) ? (NH₃)₃, Ca(DIPP‐nacnac)[NH(Me)BH₃] ? (NH₃)₂, Ca(DIPP‐nacnac)[NH(iPr)BH₃] ? (NH₃)₂, and Ca(DIPP‐nacnac)[NH(DIPP)BH₃] ? NH₃. The crystal structure of Ca(DIPP‐nacnac)(NH₂BH₃) ? (NH₃)₃ showed a NH₂BH₃^? unit that was fully embedded in a network of BH???HN interactions (range: 1.97(4)–2.39(4) Å) that were mainly found between NH₃ ligands and BH₃ groups. In addition, there were N? H???C interactions between NH₃ ligands and the central carbon atom in the ligand. Solutions of these calcium–amidoborane–ammine complexes in benzene were heated stepwise to 60 °C and thermally decomposed. The following main conclusions can be drawn: 1) Competing protonation of the DIPP‐nacnac anion by NH₃ was observed; 2) The NH₃ ligands were bound loosely to the Ca²⁺ ions and were partially eliminated upon heating. Crystal structures of [Ca(DIPP‐nacnac)(NH₂BH₃) ? (NH₃)]_∞, Ca(DIPP‐nacnac)(NH₂BH₃) ? (NH₃) ? (THF), and [Ca(DIPP‐nacnac){NH(iPr)BH₃}]₂ were obtained. 3) Independent of the nature of the substituent R in NH(R)BH₃, the formation of H₂ was observed at around 50 °C. 4) In all cases, the complex [Ca(DIPP‐nacnac)(NH₂)]₂ was formed as a major product of thermal decomposition, and its dimeric nature was confirmed by single‐crystal analysis. We proposed that thermal decomposition of calcium–amidoborane–ammine complexes goes through an intermediate calcium–hydride–ammine complex which eliminates hydrogen and [Ca(DIPP‐nacnac)(NH₂)]₂. It is likely that the formation of metal amides is also an important reaction pathway for the decomposition of metal–amidoborane–ammine complexes in the solid state.     

Molecular and electronic structures of iron complexes containing N,S-coordinated,open-shell o-iminothionebenzosemiquinonate(1-) pi radicals

The reaction of the dinuclear species (mu-NH,NH)[Fe(III)(L(IP))(L(AP))](2) dissolved in CH(2)Cl(2) with dioxygen affords black microcrystals of diamagnetic (mu-S,S)[Fe(III)(L(IP))(L(ISQ))](2).n-hexane (6) upon the addition of n-hexane, where (L(IP))(2)(-) represents the dianion of 4,6-di-tert-butyl-2-aminothiophenol, (L(AP))(-) is the corresponding monoanion, and (L(ISQ))(-) is the corresponding o-iminothionebenzosemiquinonate(1-) pi radical monoanion; similarly, the dianion ('H(2)N(2)S(2)')(2)(-) is derived from 1,2-ethanediamine-N,N'-bis(2-benzenethiol), and ('N(2)S(2)(*)')(3)(-) is its monoradical trianion. The above reaction in a CH(2)Cl(2)/CH(3)OH (1:1) mixture yields the diamagnetic isomer (mu-NH,NH)[Fe(III)(L(IP))(L(ISQ))](2).5CH(3)OH (7), whereas air oxidation of (mu-S,S)[Fe(II)('H(2)N(2)S(2)')](2) in CH(3)CN yields diamagnetic (mu-S,S)[Fe(III)('N(2)S(2)(*)')](2) (8). Complexes 6 and 8 were shown to undergo addition reactions with phosphines, phosphites, or cyanide affording the following complexes: trans-[Fe(II)(L(ISQ))(2)(P(OPh)(3))] (9; S(t) = 0) and [N(n-Bu)(4)][Fe(II)(L(ISQ))(2)(CN)] (S(t) = 0). Oxidation of 6 in CH(2)Cl(2) with iodine, bromine, and chlorine respectively yields black microcrystals of [Fe(III)(L(ISQ))(2)X] (X = I, Br, or Cl) with S(t) = (1)/(2). The structures of complexes 6-9 have been determined by X-ray crystallography at 100 K. The oxidation level of the ligands and iron ions in all complexes has been unequivocally established, as indicated by crystallography; electron paramagnetic resonance, UV-vis, and M?ssbauer spectroscopies; and magnetic-susceptibility measurements. The N,S-coordinated o-iminothionebenzosemiquinonate(1-) pi radicals have been identified in all new complexes. The electronic structures of the new complexes have been determined, and it is shown that no evidence for iron oxidation states >III is found in this chemistry.     

Stabilization of calcium- and terbium-carboxylate bonds by NH...O hydrogen bonds in a mononuclear complex: a functional model of the active site of calcium-binding proteins

Novel benzoic acid ligands with bulky amide groups at the ortho position, 2,6-(MeCONH)(2)C(6)H(3)CO(2)H (1) and 2,6-(t-BuCONH)(2)C(6)H(3)CO(2)H (2), and their tris- and tetrakis(carboxylate) complexes with Ca(II) and Tb(III) ions, (NEt(4))(2)[Ca(II)[O(2)C-2,6-(t-BuCONH)(2)C(6)H(3)](4)] (4), [Tb[O(2)C-2,6-(t-BuNHCO)(2)C(6)H(3)](3)(H(2)O)(3)]] (5), and (NMe)(4)[Tb[O(2)C-2,6-(t-BuNHCO)(2)C(6)H(3)](4)(thf)] (6), were synthesized. The formation of the NH...O hydrogen bonds between the amide NH and carboxylate for 2, (NEt(4))[2,6-(t-BuCONH)(2)C(6)H(3)CO(2)] (3), and 4 was determined by (1)H NMR spectroscopy in solution and in the solid state (CRAMPS, IR). The ligand exchange reactions were attempted between 4 and a large excess of 2,4,6- Me(3)C(6)H(3)CO(2)H in chloroform-d solution; however, exchange reaction did not take place, indicating that the Ca(II) ions bound strongly to the carboxylate in 4. The Ca(II) ion binding properties with the benzoate derivatives were also examined using Tb(III) ion as a fluorescence probe. These results indicate that the NH...O hydrogen bonding between the amide NH and the oxygen atom of the carboxylate contributes to strong Ca(II) binding and prevents the dissociation of the calcium-carboxylate bond. The X-ray structural analyses of these complexes revealed that the NH.O hydrogen-bonded carboxylate ligands prefer the chelate-type coordination and create a mononuclear [Ca(O(2)CR)(4)](2)(-) or [Tb(O(2)CR)(4)](-) core with anionic charge, which is known only in the active site of calcium-binding proteins.     

Synthesis of [Ag(NH=CMe(2))(2)]ClO(4) and its use as a source of acetimine. 1. Synthesis of the first acetimine rhodium complexes and the first crystal structure of a diacetonamine complex

The reaction of AgClO(4) and NH(3) in acetone gave [Ag(NH=CMe(2))(2)]ClO(4) (1). The reactions of 1 with [RhCl(diolefin)](2) or [RhCl(CO)(2)](2) (2:1) gave the bis(acetimine) complexes [Rh(diolefin)(NH=CMe(2))(2)]ClO(4) [diolefin = 1,5 cyclooctadiene = cod (2), norbornadiene = nbd (3)] or [Rh(CO)(2)(NH=CMe(2))(2)]ClO(4) (4), respectively. Mono(acetimine) complexes [Rh(diolefin)(NH=CMe(2))(PPh(3))]ClO(4) [diolefin = cod (5), nbd (6)] or [RhCl(diolefin)(NH=CMe(2))] [diolefin = cod (7), nbd (8)] were obtained by reacting 2 or 3 with PPh(3) (1:1) or with Me(4)NCl (1:1.1), respectively. The reaction of 4 with PR(3) (R = Ph, To, molar ratio 1:2) led to [Rh(CO)(NH=CMe(2))(PR(3))(2)]ClO(4) [R = Ph (9), C(6)H(4)Me-4 = To (10)] while cis-[Rh(CO)(NH=CMe(2))(2)(PPh(3))]ClO(4) (11) was isolated from the reaction of 1 with [RhCl(CO)(PPh(3))](2) (1:1). The crystal structures of 5 and [Ag[H(2)NC(Me)(2)CH(2)C(O)Me](PTo(3))]ClO(4) (A), a product obtained in a reaction between NH(3), AgClO(4), and PTo(3), have been determined.     

Surface organobarium and organomagnesium chemistry on periodic mesoporous silica MCM-41: convergent and sequential approaches traced by molecular models

The alkaline earth metal alkyl complexes [Ba(AlEt(4))(2)](n) and Mg(AlMe(4))(2) were directly grafted onto periodic mesoporous silica MCM-41, which had been dehydroxylated at 270 °C (specific surface area a(s): 1023 m(2) g(-1); pore volume V(p): 1.08 cm(3) g(-1); main pore diameter 3.4 nm). Alternatively, barium alkyl surface species were generated by sequential grafting of MCM-41 with Ba[N(SiHMe(2))(2)](2)(thf)(4) and AlEt(3) to yield the hybrid material AlEt(3)@Ba[N(SiHMe(2))(2)](2)(thf)(4)@MCM-41. For a better understanding of the surface chemistry, AlEt(3)@MCM-41 was also accessed. All hybrid materials were analyzed by diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy, elemental analysis, nitrogen physisorption, and solid-state NMR spectroscopy; this clearly revealed distinct surface chemistry for the alkylaluminate-treated materials [Ba(AlEt(4))(2)]@MCM-41 and Mg(AlMe(4))(2)@MCM-41. In an attempt to mimic the surface chemistry, the organometallic precursors were treated with HOSi(OtBu)(3). The reaction of equimolar amounts of {Ba[N(SiHMe(2))(2)](2)}(n) and HOSi(OtBu)(3) produced a mixed silylamido/siloxide cluster of Ba(3)[OSi(OtBu)(3)](3)[N(SiHMe(2))(2)](3) with bridging-only siloxide ligands as well as one bridging and two terminal silylamido ligands. The Schlenk equilibrium was found to govern the [Ba(AlEt(4))(2)](n)-HOSi(OtBu)(3) and Mg(AlMe(4))(2)-HOSi(OtBu)(3) reactions, leading to the isolation of complexes of [Ba(AlEt(4))(2) (toluene)](2) and Mg[OSi(OtBu)(3))](2)(AlMe(3))(2), respectively. Allowing for a donor-induced cleavage of Mg(AlMe(4))(2), the reaction of [MgMe(2)] with one or two equivalents of HOSi(OtBu)(3) was studied. While putative Mg[OSi(OtBu)(3)](Me) and Mg[OSi(OtBu)(3)](2) could not be crystallized from the reaction mixtures, cluster complexes Mg(5)(O)[OSi(OtBu)(3)](5)Me(3) and Mg(4)(OH)(2)[OSi(OtBu)(3)](6) could be unambiguously identified by X-ray crystallography.     

Molecular and electronic structures of iron(II)/(III) complexes containing N,S-coordinated,closed-shell o-aminothiophenolato(1-) and o-iminothiophenolato(2-) ligands

The coordination chemistry of the ligands o-aminothiophenol, H(abt), 4,6-di-tert-butyl-2-aminothiophenol, H[L(AP)], and 1,2-ethanediamine-N,N'-bis(2-benzenethiol), H(4)('N(2)S(2')), with FeCl(2) under strictly anaerobic and increasingly aerobic conditions has been systematically investigated. Using strictly anaerobic conditions, the neutral, air-sensitive, yellow complexes (mu-S,S)[Fe(II)(abt)(2)](2) (1), (mu-S,S)[Fe(II)(L(AP))(2)](2).8CH(3)OH (2), and (mu-S,S)[Fe(II)('H(2)N(2)S(2'))](2).CH(3)CN (3) containing high spin ferrous ions have been isolated where (abt)(1-), (L(AP))(1-), and ('H(2)N(2)S(2'))(2-) represent the respective N,S-coordinated, aromatic o-aminothiophenolate derivative of these ligands. When the described reaction was carried out in the presence of trace amounts of O(2) and [PPh(4)]Br, light-green crystals of [PPh(4)][Fe(II)(abt)(2)(itbs)].[PPh(4)]Br (4) were isolated. The anion [Fe(II)(abt)(2)(itbs)](-) contains a high spin ferrous ion, two N,S-coordinated o-aminophenolate(1-) ligands, and an S-bound, monoanionic o-iminothionebenzosemiquinonate(1-) pi radical, (itbs)(-). Complex 4 possesses an S(t) = 3/2 ground state. In the absence of [PPh(4)]Br and presence of a base NEt(3) and a little O(2), the ferric dimer (mu-NH,NH)[Fe(III)(L(AP))(L(IP))](2) (5a) and its isomer (mu-S,S)[Fe(III)(L(AP))(L(IP))](2) (5b) formed. (L(IP))(2-) represents the aromatic o-iminothiophenolate(2-) dianion of H[L(AP)]. The structures of compounds 2, 4, and 5a have been determined by X-ray crystallography at 100(2) K. Zero-field M?ssbauer spectroscopy of 1, 2, 3, and 4 unambiguously shows the presence of high spin ferrous ions: The isomer shift at 80 K is in the narrow range 0.85-0.92 mm s(-1), and a large quadrupole splitting, |DeltaE(Q)|, in the range 3.24-4.10 mm s(-1), is observed. In contrast, 5a and 5b comprise both intermediate spin ferric ions (S(Fe) = 3/2) which couple antiferromagnetically in the dinuclear molecules yielding an S(t) = 0 ground state.     

Ditopic hydridoborates and hydridoboranes: bridging ligands in coordination polymers and versatile hydroboration reagents

Single crystals of the meta- and para-phenylene-bridged ditopic trihydridoborates (Li(THF)(2))(2)[m-C(6)H(4)(BH(3))(2)] and (Li(THF)(2))(2)[p-C(6)H(4)(BH(3))(2)] have been prepared and investigated by X-ray crystallography. The compounds turned out to be coordination polymers in which each trihydridoborate substituent is connected with one trihydridoborate substituent of a neighbouring monomer via two bridging Li(THF)(2)(+) ions. (Li(THF)(2))(2)[m-C(6)H(4)(BH(3))(2)] and (Li(THF)(2))(2)[p-C(6)H(4)(BH(3))(2)] suffer from poor solubility in all common non-protic solvents. Thus, a more soluble derivative of (Li(THF)(2))(2)[p-C(6)H(4)(BH(3))(2)], equipped with n-hexyl groups at the positions 2 and 5 of the phenylene ring, has been used for all further investigations (i.e., compound Li(2)[6]). Treatment of Li(2)[6] with Me(3)SiCl in the presence of excess N(Me)(2)Et leads to the abstraction of one hydride ion per boron atom under formation of the ditopic amine-borane adduct p-C(6)H(2)(n-hexyl)(2)(BH(2)-N(Me)(2)Et)(2) (7). The compound turned out to be an efficient hydroboration reagent both for internal olefins (i.e., 1,5-cyclooctadiene) and terminal alkynes (i.e., tert-butyl acetylene) to give p-C(6)H(2)(n-hexyl)(2)(9-BBN)(2) (8; 9-BBN = 9-borabicyclo[3.3.1]nonyl) and p-C(6)H(2)(n-hexyl)(2)(B(C(H)=C(H)tBu)(2))(2) (9), respectively.     

Electrophilic arene hydroxylation and phenol O-H oxidations performed by an unsymmetric μ-η(1):η(1)-O2-peroxo dicopper(II) complex

Reactions of the unsymmetric dicopper(II) peroxide complex [Cu(II)(2)(μ-η(1):η(1)-O(2))(m-XYL(N3N4))](2+) (1?O(2), where m-XYL is a heptadentate N-based ligand), with phenolates and phenols are described. Complex 1?O(2) reacts with p-X-PhONa (X = MeO, Cl, H, or Me) at -90?°C performing tyrosinase-like ortho-hydroxylation of the aromatic ring to afford the corresponding catechol products. Mechanistic studies demonstrate that reactions occur through initial reversible formation of metastable association complexes [Cu(II)(2)(μ-η(1):η(1)-O(2))(p-X-PhO)(m-XYL(N3N4))](+) (1?O(2)?X-PhO) that then undergo ortho-hydroxylation of the aromatic ring by the peroxide moiety. Complex 1?O(2) also reacts with 4-X-substituted phenols p-X-PhOH (X = MeO, Me, F, H, or Cl) and with 2,4-di-tert-butylphenol at -90?°C causing rapid decay of 1?O(2) and affording biphenol coupling products, which is indicative that reactions occur through formation of phenoxyl radicals that then undergo radical C-C coupling. Spectroscopic UV/Vis monitoring and kinetic analysis show that reactions take place through reversible formation of ground-state association complexes [Cu(II)(2)(μ-η(1):η(1)-O(2))(X-PhOH)(m-XYL(N3N4))](2+) (1?O(2)?X-PhOH) that then evolve through an irreversible rate-determining step. Mechanistic studies indicate that 1?O(2) reacts with phenols through initial phenol binding to the Cu(2)O(2) core, followed by a proton-coupled electron transfer (PCET) at the rate-determining step. Results disclosed in this work provide experimental evidence that the unsymmetric 1?O(2) complex can mediate electrophilic arene hydroxylation and PCET reactions commonly associated with electrophilic Cu(2)O(2) cores, and strongly suggest that the ability to form substrate?Cu(2)O(2) association complexes may provide paths to overcome the inherent reactivity of the O(2)-binding mode. This work provides experimental evidence that the presence of a H(+) completely determines the fate of the association complex [Cu(II)(2)(μ-η(1):η(1)-O(2))(X-PhO(H))(m-XYL(N3N4))](n+) between a PCET and an arene hydroxylation reaction, and may provide clues to help understand enzymatic reactions at dicopper sites.     

Molybdenum(VI) dioxo and oxo-imido complexes of fluorinated β-ketiminato ligands and their use in OAT reactions

Substitution of a methyl by a trifluoromethyl moiety in well-known β-ketimines afforded the ligands (Ar)NC(Me)CH(2)CO(CF(3)) (HL(H), Ar = C(6)H(5); HL(Me), A r= 2,6-Me(2)C(6)H(3); HL(iPr), Ar = 2,6-(i)Pr(2)C(6)H(3)). Subsequent complexation to the [MoO(2)](2+) core leads to the formation of novel complexes of general formula [MoO(2)(L(R))(2)] (R = H, 1; R = Me, 2; R = iPr, 3). For reasons of comparison the oxo-imido complex [MoO(N(t)Bu)(L(Me))(2)] (4) has also been synthesized. Complexes 1-4 were investigated in oxygen atom transfer (OAT) reactions using the substrate trimethylphosphine. The respective products after OAT, the reduced Mo(IV) complexes [MoO(PMe(3))(L(R))(2)] (R = H, 5; R = Me, 6; R = iPr, 7) and [Mo(N(t)Bu)(PMe(3))(L(Me))(2)] (8), were isolated. All complexes have been characterized by NMR spectroscopy, and 1-4 also by cyclic voltammetry. A positive shift of the Mo(VI)-Mo(V) reduction wave upon fluorination was observed. Furthermore, molecular structures of complexes 2, 4, 5, and 8 have been determined via single crystal X-ray diffraction analysis. Complex 8 represents a rare example of a Mo(IV) phosphino-imido complex. Kinetic measurements by UV-vis spectroscopy of the OAT reactions from complexes 1-4 to PMe(3) showed them to be more efficient than previously reported nonfluorinated ones, with ligand L' = (Ar)NC(Me)CH(2)CO(CH(3)) [MoO(2)(L')(2)] (9) and [MoO(N(t)Bu)(L')(2)] (10), respectively. Thermodynamic activation parameters ΔH(?) and ΔS(?) of the OAT reactions for complexes 2 and 4 have been determined. The activation enthalpy for the reaction employing 2 is significantly smaller (12.3 kJ/mol) compared to the reaction with the nonfluorinated complex 9 (60.8 kJ/mol). The change of the entropic term ΔS(?) is small. The reaction of the oxo-imido complex 4 to 8 revealed a significant electron-donating contribution of the imido substituent.     

Synthesis and reactivity of calix[4]arene-supported group 4 imido complexes

New mononuclear titanium and zirconium imido complexes [M(NR)(R'(2)calix)] [M=Ti, R'=Me, R=tBu (1), R=2,6-C(6)H(3)Me(2) (2), R=2,6-C(6)H(3)iPr(2) (3), R=2,4,6-C(6)H(2)Me(3) (4); M=Ti, R'=Bz, R=tBu (5), R=2,6-C(6)H(3)Me(2) (6), R=2,6-C(6)H(3)iPr(2) (7); M=Zr, R'=Me, R=2,6-C(6)H(3)iPr(2) (8)] supported by 1,3-diorganyl ether p-tert-butylcalix[4]arenes (R'(2)calix) were prepared in good yield from the readily available complexes [MCl(2)(Me(2)calix)], [Ti(NR)Cl(2)(py)(3)], and [Ti(NR)Cl(2)(NHMe(2))(2)]. The crystallographically characterised complex [Ti(NtBu)(Me(2)calix)] (1) reacts readily with CO(2), CS(2), and p-tolyl-isocyanate to give the isolated complexes [Ti[N(tBu)C(O)O](Me(2)calix)] (10), [[Ti(mu-O)(Me(2)calix)](2)] (11), [[Ti(mu-S)(Me(2)calix)](2)] (12), and [Ti[N(tBu)C(O)N(-4-C(6)H(4)Me)](Me(2)calix)] (13). In the case of CO(2) and CS(2), the addition of the heterocumulene to the Ti-N multiple bond is followed by a cycloreversion reaction to give the dinuclear complexes 11 and 12. The X-ray structure of 13.4(C(7)H(8)) clearly establishes the N,N'-coordination mode of the ureate ligand in this compound. Complex 1 undergoes tert-butyl/arylamine exchange reactions to form 2, 3, [Ti(N-4-C(6)H(4)Me)(Me(2)calix)] (14), [Ti(N-4-C(6)H(4)Fc)(Me(2)calix)] (15) [Fc=Fe(eta(5)-C(5)H(5))(eta(5)-C(5)H(4))], and [[Ti(Me(2)calix)](2)[mu-(N-4-C(6)H(4))(2)CH(2)]] (16). Reaction of 1 with H(2)O, H(2)S and HCl afforded the compounds [[Ti(mu-O)(Me(2)calix)](2)] (11), [[Ti(mu-S)(Me(2)calix)](2)] (12), and [TiCl(2)(Me(2)calix)] in excellent yields. Furthermore, treatment of 1 with two equivalents of phenols results in the formation of [Ti(O-4-C(6)H(4)R)(2)(Me(2)calix)] (R=Me 17 or tBu 18), [Ti(O-2,6-C(6)H(3)Me(2))(2)(Me(2)calix)] (19) and [Ti(mbmp)(Me(2)calix)] (20; H(2)mbmp=2,2'-methylene-bis(4-methyl-6-tert-butylphenol) or CH(2)([CH(3)][C(4)H(9)]C(6)H(2)-OH)(2)). The bis(phenolate) compounds 17 and 18 with para-substituted phenolate ligands undergo elimination and/or rearrangement reactions in the nonpolar solvents pentane or hexane. The metal-containing products of the elimination reactions are dinuclear complexes [[Ti(O-4-C(6)H(4)R)(Mecalix)](2)] [R=Me (23) or tBu (24)] where Mecalix=monomethyl ether of p-tert-butylcalix[4]arene. The products of the rearrangement reaction are [Ti(O-4-C(6)H(4)Me)(2) (paco-Me(2)calix)] (25) and [Ti(O-4-C(6)H(4)tBu)(2)(paco-Me(2)calix)] (26), in which the metallated calix[4]arene ligand is coordinated in a form reminiscent of the partial cone (paco) conformation of calix[4]arene. In these compounds, one of the methoxy groups is located inside the cavity of the calix[4]arene ligand. The complexes 24, 25 and 26 have been crystallographically characterised. Complexes with sterically more demanding phenolate ligands, namely 19 and 20 and the analogous zirconium complexes [Zr(O-4-C(6)H(4)Me)(2)(Me(2)calix)] (21) and [Zr(O-2,6-C(6)H(3)Me(2))(2)(Me(2)calix)] (22) do not rearrange. Density functional calculations for the model complexes [M(OC(6)H(5))(2)(Me(2)calix)] with the calixarene possessing either cone or partial cone conformations are briefly presented.     

Rearrangements of phosphinoimines to phosphine-imines in ruthenium chelate complexes

Thermal reaction of 1:1 mixtures of the RuCl(2)(PPh(3))(3) and phosphinoimine R(2)PN=CPh(2) (R = Ph, iPr, Me) at 140 °C results in isolation of the dimeric species [RuCl(μ-Cl)(PPh(3))(C(6)H(4)(PPh(2))C(Ph)NH)](2) (R = Ph 1, iPr 2, Me 3) containing phosphine-imine chelating ligands. Subsequent reaction of 1 and 3 with one equivalent of pyridine at room temperature give RuCl(2)(PPh(3))(py)(C(6)H(4)(PR(2))C(Ph)NH) (R = Ph 4, Me 5). Excess pyridine reacts with 2 to give a mixture of the cis and trans-isomers of RuCl(2)(py)(2)(C(6)H(4)(PiPr(2))C(Ph)NH) 6 and 7 respectively. Treatment of 5 with excess PPh(3) affords RuCl(2)(PPh(3))(2)(C(6)H(4)(PMe(2))C(Ph)NH) 8. Aspects of the mechanism of the thermal rearrangements of the phosphinoimine to the phosphine-imine ligands are considered and the isolation of RuCl(2)(Ph(2)PN=CPh(2))(SIMes)(CHPh) 9 and RuCl(2)(PPh(3))(2)(HN=C(Ph)C(6)H(4)) 10 provide support for a proposed mechanism involving a intermediate containing a Ru-bound metallated aryl-imine fragment.     

Rhenium(V) oxo complexes with N-heterocyclic carbenes

Air-stable rhenium(V) oxo complexes are formed when [ReOCl(3)(PPh(3))(2)] is treated with N-heterocyclic carbenes of the 1,3-dialkyl-4,5-dimethylimidazol-2-ylidene type, L(R) (R = Me, Et, i-Pr). Complexes of the compositions [ReO(2)(L(R))(4)](+), [ReOCl(L(R))(4)](2+), or [ReO(OMe)(L(R))(4)](2+) can be isolated depending on the alkyl substituents at the nitrogen atoms of the ligands and the reaction conditions applied. Despite the steric overcrowding of the equatorial coordination spheres of the metal atoms by each of the four carbene ligands, stable complexes with six-coordinate rhenium atoms are obtained. Steric demands of the alkyl groups allow control of the stability of the mono-oxo intermediates. Air-stable cationic complexes of the compositions [ReOCl(L(Me))(4)](2+), [ReOCl(L(Et))(4)](2+), and [ReO(OMe)(L(Me))(4)](2+) have been isolated, whereas reactions of [ReOCl(3)(PPh(3))(2)] or other rhenium(V) precursors with the more bulky 1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene (L(i)(-)(Pr)) directly yield the dioxo complex [ReO(2)(L(i)(-)(Pr))(4)](+). X-ray structures of [ReO(2)(L(i)(-)(Pr))(4)][ReO(4)], [ReO(2)(L(i)(-)(Pr))(4)][PF(6)], [ReO(2)(L(Me))(4)][ReO(4)](0.45)[PF(6)](0.55), [ReO(MeOH)(L(Me))(4)][PF(6)](2), and [ReOCl(L(Et))(4)][PF(6)](2) show that the equatorial coordination spheres of the rhenium atoms are essentially planar irrespective of the steric demands of the individual carbene ligands.     

New chloro,mu-oxo,and alkyl derivatives of dioxomolybdenum(VI) and -tungsten(VI) complexes chelated with N(2)O tridentate ligands: synthesis and catalytic activities toward olefin epoxidation

A new series of cis-dioxomolybdenum(VI) complexes MoO(2)(L(n))Cl (n = 1-5) were prepared by the reaction of MoO(2)Cl(2)(DME) (DME = 1,2-dimethoxyethane) with 2-N-(2-pyridylmethyl)aminophenol (HL(1)) or its N-alkyl derivatives (HL(n)) (n = 2-5) in the presence of triethylamine. The new mu-oxo dimolybdenum compounds [MoO(2)(L(n))](2)O (n = 1, 4, 5, 7) were also prepared by treating the corresponding ligand HL(n) with MoO(2)(acac)(2) (acac = acetylacetonate) in warm methanolic solutions or (NH(4))(6)[Mo(7)O(24)].4H(2)O in the presence of dilute HCl. Treatment of MoO(2)(L(1))Cl or [MoO(2)(L(1))](2)O with the Grignard reagent Me(3)SiCH(2)MgCl gave the alkyl compound MoO(2)(L(1))(CH(2)SiMe(3)), which represents the first example of dioxomolybdenum(VI) alkyl complex supported by a N(2)O-type ancillary ligand. The analogous chloro and mu-oxo tungsten derivatives WO(2)(L(n))Cl (n = 6, 7) and [WO(2)(L(n))](2)O (n = 1, 4, 6, 7) were prepared by the reaction of WO(2)Cl(2)(DME) with HL(n) in the presence of triethylamine. Similar to their molybdenum analogues, the tungsten alkyl complexes WO(2)(L(n))(R) (n = 6, 7; R = Me, Et, CH(2)SiMe(3), C(6)H(4)(t)Bu-4) were synthesized by treating WO(2)(L(n))Cl or [WO(2)(L(n))](2)O (n = 6, 7) with the appropriate Grignard reagents. The catalytic properties of selected dioxo-Mo(VI) and -W(VI) chloro and mu-oxo complexes toward epoxidation of styrene by tert-butyl hydroperoxide (TBHP) were also investigated.     

Reactions of beryllium halides in liquid ammonia: the tetraammineberyllium cation [Be(NH3)4]2+, its hydrolysis products, and the action of Be2+ as a fluoride-ion acceptor

The first structural characterization of the text-book tetraammineberyllium(II) cation [Be(NH(3))(4)](2+), obtained in the compounds [Be(NH(3))(4)](2)Cl(4)?17NH(3) and [Be(NH(3))(4)]Cl(2), is reported. Through NMR spectroscopic and quantum chemical studies, its hydrolysis products in liquid ammonia were identified. These are the dinuclear [Be(2)(μ-OH)(NH(3))(6)](3+) and the cyclic [Be(2)(μ-OH)(2)(NH(3))(4)](2+) and [Be(3)(μ-OH)(3)(NH(3))(6)](3+) cations. The latter species was isolated as the compound [Be(3)(μ-OH)(3)(NH(3))(6)]Cl(3)?7NH(3). NMR analysis of solutions of BeF(2) in liquid ammonia showed that the [BeF(2)(NH(3))(2)] molecule was the only dissolved species. It acts as a strong fluoride-ion acceptor and forms the [BeF(3)(NH(3))](-) anion in the compound [N(2)H(7)][BeF(3)(NH(3))]. The compounds presented herein were characterized by single-crystal X-ray structure analysis, (9)Be, (17)O, and (19)F?NMR, IR, and Raman spectroscopy, deuteration studies, and quantum chemical calculations. The extension of beryllium chemistry to the ammine system shows similarities but also decisive differences to the aquo system.     

Imido Complexes Derived from the Reactions of Niobium and Tantalum Pentachlorides with Primary Amines: Relevance to the Chemical Vapor Deposition of Metal Nitride Films

Reactions of niobium and tantalum pentachlorides with tert-butylamine (>/=6 equiv) in benzene afford the dimeric imido complexes [NbCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)](2) (90%) and [TaCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)](2) (79%). The niobium complex exists as two isomers in solution, while the tantalum complex is composed of three major isomers and at least two minor isomers. Analogous treatments with isopropylamine (>/=7 equiv) give the monomeric complexes NbCl(2)(N(i)Pr)(NH(i)Pr)(NH(2)(i)Pr)(2) (84%) and TaCl(2)(N(i)Pr)(NH(i)Pr)(NH(2)(i)Pr)(2) (84%). The monomeric complexes are unaffected by treatment with excess isopropylamine, while the dimeric complexes are cleaved to the monomers MCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)(2) upon addition of excess tert-butylamine in chloroform solution. Treatment of niobium and tantalum pentachlorides with 2,6-diisopropylaniline affords insoluble precipitates of [NH(3)(2,6-(CH(CH(3))(2))(2)C(6)H(3))](2)[NbCl(5)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))] (100%) and [NH(3)(2,6-(CH(CH(3))(2))(2)C(6)H(3))](2)[TaCl(5)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))] (100%), which react with 4-tert-butylpyridine to afford the soluble complexes [4-t-C(4)H(9)C(5)H(4)NH](2)[NbCl(5)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))] (45%) and [4-t-C(4)H(9)C(5)H(4)NH](2)[TaCl(5)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))] (44%). Sublimation of [NbCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)](2), MCl(2)(N(i)Pr)(NH(i)Pr)(NH(2)(i)Pr)(2), and [NH(3)(2,6-(CH(CH(3))(2))(2)C(6)H(3))](2)[MCl(5)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))] leads to decomposition to give [MCl(3)(NR)(NH(2)R)](2) as sublimates (32-49%), leaving complexes of the proposed formulation MCl(NR)(2) as nonvolatile residues. By contrast, [TaCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)](2) sublimes without chemical reaction. Analysis of the organic products obtained from thermal decomposition of [NbCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)](2) showed isobutylene and tert-butylamine in a 2.2:1 ratio. Mass spectra of [NbCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)](2), [TaCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)](2), and [NbCl(3)(N(i)Pr)(NH(2)(i)Pr)](2) showed the presence of dimeric imido complexes, monomeric imido complexes, and nitrido complexes, implying that such species are important gas phase species in CVD processes utilizing these molecular precursors. The crystal structures of [4-t-C(4)H(9)C(5)H(4)NH](2)[NbCl(5)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))], [NbCl(3)(N(i)Pr)(NH(2)(i)Pr)](2), [NbCl(3)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))(NH(2)(2,6-(CH(CH(3))(2))(2)C(6)H(3)))](2), and [TaCl(3)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))(NH(2)(2,6-(CH(CH(3))(2))(2)C(6)H(3)))](2) were determined. [4-t-C(4)H(9)C(5)H(4)NH](2)[NbCl(5)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))] crystallizes in the space group P2(1)/c with a = 12.448(3) ?, b = 10.363(3) ?, c = 28.228(3) ?, beta = 94.92(1) degrees, V = 3628(5) ?(3), and Z = 4. [NbCl(3)(N(i)Pr)(NH(2)(i)Pr)](2) crystallizes in the space group P2(1)/c with a = 9.586(4) ?, b = 12.385(4) ?, c = 11.695(4) ?, beta = 112.89(2) degrees, V = 1279.0(6) ?(3), and Z = 2. [NbCl(3)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))(NH(2)(2,6-(CH(CH(3))(2))(2)C(6)H(3)))](2) crystallizes in the space group P2(1)/n with a = 10.285(3) ?, b = 11.208(3) ?, c = 23.867(6) ?, beta = 97.53 degrees, V = 2727(1) ?(3), and Z = 2. [TaCl(3)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))(NH(2)(2,6-(CH(CH(3))(2))(2)C(6)H(3)))](2) crystallizes in the space group P2(1)/n with a = 10.273(1) ?, b = 11.241(2) ?, c = 23.929(7) ?, beta = 97.69(2) degrees, V = 2695(2) ?(3), and Z = 2. These findings are discussed in the context of niobium and tantalum nitride film depositions from molecular precursors.     

Synthesis and reactions of triphenylsilanethiolato complexes of manganese(II), iron(II), cobalt(II), and nickel(II)

Reactions of Fe[N(SiMe(3))(2)](2) with 1 and 2 equiv of Ph(3)SiSH in hexane afforded dinuclear silanethiolato complexes, [Fe(N(SiMe(3))(2))(mu-SSiPh(3))](2) (1) and [Fe(SSiPh(3))(mu-SSiPh(3))](2) (2), respectively. Various Lewis bases were readily added to 2, generating mononuclear adducts, Fe(SSiPh(3))(2)(L)(2) [L = CH(3)CN (3a), 4-(t)BuC(5)H(4)N (3b), PEt(3) (3c), (LL) = tmeda (3d)]. From the analogous reactions of M[N(SiMe(3))(2)](2) (M = Mn, Co) and [Ni(NPh(2))(2)](2) with Ph(3)SiSH in the presence of TMEDA, the corresponding silanethiolato complexes, M(SSiPh(3))(2)(tmeda) [M = Mn (4), Co (5), Ni (6)], were isolated. Treatment of 3a with (PPh(4))(2)[MoS(4)] or (NEt(4))(2)[FeCl(4)] resulted in formation of a linear trinuclear Fe-Mo-Fe cluster (PPh(4))(2)[MoS(4)(Fe(SSiPh(3))(2))(2)] (7) or a dinuclear complex (NEt(4))(2)[Fe(2)(SSiPh(3))(2)Cl(4)] (8). On the other hand, the reaction of 3a with [Cu(CH(3)CN)(4)](PF(6)) gave a cyclic tetranuclear copper cluster Cu(4)(SSiPh(3))(4) (9), where silanethiolato ligands were transferred from iron to copper. Silicon-sulfur bond cleavage was found to occur when the cobalt complex 5 was treated with (NBu(4))F in THF, and a cobalt-sulfido cluster Co(6)(mu(3)-S)(8)(PPh(3))(6) (10) was isolated upon addition of PPh(3) to the reaction system. The silanethiolato complexes reported here are expected to serve as convenient precursors for sulfido cluster synthesis.     

New cyclopentenyl-linked [NPN] ligands and their coordination chemistry with zirconium: synthesis of a dinuclear side-on-bound dinitrogen complex

The synthesis and characterization of two 1,2-cyclopentyl-bridged diiminophosphine proligands, (CY5)[NPN](DMP)H(2) (CY5 = cyclopentylidene; DMP = 2,6-Me(2)C(6)H(3)) and (CY5)[NPN](DIPP)H(2) (DIPP = 2,6-(i)Pr(2)C(6)H(3)), are presented, and tautomerization to the corresponding 1,2-cyclopentenyl-bridged enamineimine phosphine precursors is reported. These two new proligands are obtained by deprotonation of N-DMP- or N-DIPP-cyclopentylideneimine (N-DMP, 2,6-dimethylphenyl; N-DIPP, 2,6-diisopropylphenyl) and the subsequent addition of 0.5 equiv of dichlorophenylphosphine. Each ligand precursor exists as a mixture of isomers that consist of the diimine, enamineimine, and dienamine tautomers and corresponding stereoisomers, each of which could be identified. The bis(dimethylamido)zirconium complexes (CY5)[NPN](DMP)Zr(NMe(2))(2) and (CY5)[NPN](DIPP)Zr(NMe(2))(2) were prepared directly from the neutral proligands and Zr(NMe(2))(4) via protonolysis. Exchange of the dimethylamido ligands in the latter complexes for chlorides and iodides takes place upon reaction with excess Me(3)SiCl and Me(3)SiI, respectively. A dinuclear zirconium-dinitrogen complex, {(CY5)[NPN](DMP)Zr(THF)}(2)(μ-η(2):η(2)-N(2)), was obtained via KC(8) reduction of (CY5)[NPN](DMP)ZrCl(2) under 4 atm of N(2). On the basis of single-crystal X-ray analysis, N(2) has been reduced to a side-on-bound hydrazido (μ-η(2):η(2)-N(2)(4-)) unit. This dinitrogen complex is thermally unstable and decomposes in solution.     

Synthesis of zinc trisubstituted hydrazido complexes and ortho-metalation of 4-(dimethylamino)pyridine

The zinc hydrazide complexes [EtZn(N(SiMe(3))NMe(2))](2), [EtZn(N(Me)NMe(2))](4), and Zn(3)Et(4)(N(Et)NMe(2))(2) were synthesized by allowing excess hydrazine, HN(R)NMe(2), to react with diethyl zinc. The product of the reaction between ZnEt(2) and HN(i-Pr)NMe(2)ortho-metalated 4-(dimethylamino)pyridine (DMAP) at room temperature, producing the complex Zn[(NC(5)H(3)-p-NMe(2))ZnEt(N(i-Pr)NMe(2))](2). At elevated temperatures, Zn(3)Et(4)(N(Et)NMe(2))(2) also ortho-metalated DMAP, but [EtZn(N(Me)NMe(2))](4) did not. Single-crystal X-ray diffraction studies revealed that the hydrazide ligands in [EtZn(N(SiMe(3))NMe(2))](2) act as bridging mono-hapto amide ligands, and in Zn(3)Et(4)(N(Et)NMe(2))(2) and Zn[(NC(5)H(3)-p-NMe(2))ZnEt(N(i-Pr)NMe(2))](2) the hydrazide ligands are di-hapto.