阴离子Gemini表面活性剂在油/水界面行为的分子动力学模拟

采用分子动力学方法研究了磺酸盐型阴离子Gemini表面活性剂在油/水界面的吸附行为, 考察了不同长度的连接基(Spacer)对表面活性剂在界面的聚集形态及界面性质的影响. 密度分布和微观结构信息显示, Gemini表面活性剂能在油/水界面形成单层膜结构. Gemini表面活性剂能使油/水界面的厚度显著增大, 并使界面形成能降低. 当连接基为6个碳时, 此类磺酸盐型Gemini表面活性剂的界面厚度最大, 形成的界面最稳定. 连接基长度对Gemini表面活性剂单层膜周围的水分子和Na⁺的吸附结构影响不大, 但是能影响水分子的扩散行为.     

烷基酚阴离子表面活性剂的合成与应用进展

将本实验室最新研究成果与相关文献报导相结合,介绍了目前以烷基酚为原料合成阴-非离子表面活性剂、Extended表面活性剂和Gemini表面活性剂的最新动态,特别注重它们在三次采油等非直接环境排放型应用场合的高效合理利用。指出深入开发区域选择性硫酸化/磺化、硫酸酯盐转磺酸盐、羟基直接氧化合成羧酸盐以及烷基酚偶联合成Gemini骨架等技术对于合理和高效利用烷基酚具有重要意义。     

新型腰果酚双子表面活性剂的合成及表面活性

以天然生物质腰果酚、1,3-二溴丙烷及氯磺酸为原料,通过醚化、磺化及中和三步反应合成了一类新型的腰果酚基磺酸盐双子(Gemini)表面活性剂.采用傅立叶转换红外光谱仪和核磁共振谱仪表征了产物的结构;采用滴体积法测定了腰果酚Gemini表面活性剂的表面张力,研究了水溶液的表面性质,并与相应的单基腰果酚基磺酸盐表面活性剂进行了对比.结果表明:腰果酚Gemini表面活性剂水溶液的临界胶束浓度(cmc)为6.20×10-2 mmol.L-1,远小于相应的单基腰果酚表面活性剂水溶液的cmc(8.40mmol.L-1);其临界表面张力γcmc为36.92mN.m-1,与单基腰果酚表面活性剂水溶液的相近(γcmc为38.41mN.m-1).与此同时,腰果酚Gemini表面活性剂水溶液的最小分子截面积Amin为0.27nm2,比相应的单基表面活性剂水溶液的小得多.     

Gemini型甜菜碱表面活性剂合成进展

Gemini型甜菜碱结合了甜菜碱和Gemini型表面活性剂的优点,可以在较低浓度下达到超低油水界面张力、配伍性好、耐温耐盐性好、Krafft点以及吸附量低,被广泛应用于日用化学、化学化工、纳米材料、生物技术和石油开采等领域。本文基于间隔基的类型介绍了近年来Gemini型甜菜碱表面活性剂方面的最新研究进展。重点阐述了对称胺型、三嗪环型、二卤代物型Gemini甜菜碱的合成方法,并从原料成本、产率、反应周期以及产物的性能等方面对合成方法进行了分析和比较。最后对Gemini型甜菜碱表面活性剂的发展进行了展望。     

Gemini阴离子表面活性剂水溶液的界面活性

Gemini阴离子表面活性剂水溶液的界面活性;Gemini阴离子表面活性剂;表面张力;CMC;C20;界面张力     

两性离子表面活性剂的合成及其表面性质

合成了一类含季铵基和磺酸基结构的非对称Gemini两性离子表面活性剂;利用红外光谱、质谱、离子定性试验验证了合成产物的分子结构,并测定了其表面性质.结果表明,目标产物的分子结构符合设计预期;五种非对称Gemini两性离子表面活性剂的表面张力在30mN/m左右,临界胶束浓度达到10-4~10-5数量级.此外,虽然非对称Gemini两性离子表面活性剂的起泡性能比相应单链型表面活性剂的稍差,但其稳泡性明显优于后者.     

含酰胺基Gemini阳离子表面活性剂的合成及性能

以棕榈酸、N,N-二甲基丙二胺、环氧氯丙烷和脂肪胺为原料合成了一系列Gemini阳离子表面活性剂.用红外光谱、质谱对产品进行了结构分析,并对产品性能进行了测定.结果表明:所合成的Gemini阳离子表面活性剂的临界胶束浓度低于传统阳离子表面活性剂十六烷基三甲基溴化铵(CTAB)1-2个数量级;当浓度为1×10-3mol/...     

新一代表面活性剂: Geminis

表面活性剂Gemini (或称dimeric) 是由两个单链单头基普通表面活性剂在离子头基处通过化学键联接而成, 因而阻抑了表面活性剂有序聚集过程中的头基分离力, 极大提高了表面活性。与当前为提高表面活性而进行的大量尝试, 如添加盐类、提高温度或将阴离子表面活性剂与阳离子表面活性剂混合相比较, Gemini 表面活性剂是概念上的突破, 因而被誉为新一代的表面活性剂。     

Gemini 阴离子表面活性剂水溶液的聚集性质

合成了一种Gemini阴离子表面活性剂,测定了其临界胶束浓度cmc和cmc时的表面张力γcmc,与传统的单基表面活性剂相比,其临界胶束浓度降低了一个数量级,具有突出的降低水的表面张力的效率;研究了该种Gemini表面活性剂的浓度对于胶束聚集数的影响,结果表明,随着浓度的增加,胶束聚集数出现了一个极大值,同时观察到液晶微相的生成.     

琥珀酸酯磺酸盐Gemini表面活性剂的合成及表面活性

以1-十二醇、1-十四醇、1-十六醇、1-十八醇、马来酸酐和乙二醇为主要原料,合成4种琥珀酸酯磺酸盐Gemini表面活性剂;借助红外光谱和核磁共振氢谱对所合成的化合物结构进行了表征。 4种表面活性剂均具有较低的临界胶束浓度,较强的乳化性能以及较好的泡沫性能。 进一步讨论了4种表面活性剂结构与性能的关系。     

A new anionic, hydrolysis-resistant polymerizable surfactant: synthesis and polymerization

The synthesis and some surfactant properties of a new type of sulfonated anionic monomer which is useful for free-radical polymerization are described. The monomer is based on the isobutenyl moiety as a reactive group. Higher homologues behave as polymerizable surfactants (“surfmers”). Copolymerization with a number of standard monomers is possible, as well as homopolymerization under micellar conditions. Received: 1 December 1998 Accepted in revised form: 11 March 1999     

Interaction between β‐Cyclodextrin and Mixed Cationic‐Anionic Surfactants (2): Aggregation Behavior

The interactions between β‐cyclodextrin (β‐CD) and the mixtures of cationic‐anionic surfactants in the aqueous solution were investigated by surface tension, rheology, and dynamic light scattering measurements. It was shown that the key‐lock interactions between β‐CD and mixed cationic‐anionic surfactants were stronger than the electrostatic/hydrophobic interactions between cationic and anionic surfactants. The inclusion of β‐CD to surfactants could destroy the ion‐pair and aggregates of cationic‐anionic surfactants, and even inhibited the precipitation of the mixed cationic‐anionic surfactants. Furthermore, the inclusion of β‐CD to surfactants could also destroy the hydrogen bond between β‐CD molecules, inducing the disassociation of the aggregation formed by β‐CD themselves.     

催化动力学光度法测定阴离子表面活性剂

基于在H2SO4介质中,阴离子表面活性剂对高碘酸钠氧化罗丹明B褪色的反应具有较强的催化作用,建立了测定阴离子表面活性剂的催化动力学光度法.本文以十二烷基硫酸钠为标准品进行实验,线性范围为0.08～0.20 mg/L,检出限为0.0193 mg/L.用于水样中阴离子表面活性剂总量的测定,测定结果的相对标准偏差为1.3%～1.4%,回收率为104%～106%.     

荧光探针法研究新型Gemini表面活性剂在水溶液中的聚集行为

以芘为荧光探针、二苯酮为猝灭剂,用稳态荧光探针法测定了新型Gemini表面活性剂的临界胶团浓度(CMC)、胶团聚集数(N_agg)及胶团微极性.研究了Gemini表面活性剂结构和氯化钠浓度对CMC、N_agg、胶团微极性的影响.结果表明,新型Gemini表面活性剂的CMC比常规表面活性剂的CMC低1—2个数量级.当疏水基碳原子数增加时,CMC依次降低,N_agg增大,胶团微极性减小.当氯化钠浓度增大时,N_agg增大,胶团微极性减小.     

Optical sensor of anionic surfactants using solid-phase extraction with a lactone-form rhodamine B membrane.

An optical sensor for the detection of anionic surfactants was developed. The optical sensing membrane is a 2-nitrophenyloctyl ether-plasticized poly(vinyl chloride) membrane incorporating a lactone-form Rhodamine B (L-RB). The response of the optical membrane to anionic surfactants was a result of the ion-pair coextraction of an anionic surfactant and a proton into the PVC membrane. The L-RB forms an ion associate with the extracted anionic surfactant; simultaneously, the formed L-RB ion associate is accompanied by a spectral change. Namely, the extracted anionic surfactant changes the color of the membrane from light pink to dark pink (absorption maximum; 558 nm). The optical membrane responds to anionic surfactants, such as dodecylbenzenesulfonate, dodecylsulfate and di-2-ethylhexyl sulfosuccinate in the concentration range from 1 to 50 microM.     

Flotation activity of polymer anionic surfactants in the case of flotation desliming of sylvinite ore

Ethoxylated anionic polymer surfactants were suggested as collectors for a sludge flotation. The mechanism of fixing anionic surfactants on the clay-carbonate slimes was examined by FTIR spectroscopy and electron microscopy.     

Methods for the determination of anionic surfactants

Methods for the determination of synthetic anionic surfactants published in the past two decades are considered, and their advantages and disadvantages are demonstrated. Spectrophotometric and potentiometric (with the use of ion-selective electrodes) techniques, including flow injection analysis versions, are used for the determination of anionic surfactants. Chromatographic techniques (primarily, high-performance liquid chromatography) are most frequently used for the separation, preconcentration, and determination of anionic surfactants in complex mixtures. Spectrofluorimetry, voltammetry, and immunoassay did not find wide application.     

Assessment of the surfactant-dye binding degree method as an alternative to the methylene blue method for the determination of anionic surfactants in aqueous environmental samples

The surfactant to dye binding degree (SDBD) method is proposed for the routine monitoring of anionic surfactants in aqueous environmental samples and their analytical features compared with those provided by the standard methylene blue (MB) method. This new analytical approach is based on the effect that anionic surfactants exert on the binding degree of the cationic surfactant didodecyldimethylammonium bromide (DDABr) to the anionic dye Coomassie Brilliant Blue G (CBBG). The formation of DDABr-CBBG aggregates is monitored photometrically. The analytical applicability of the proposed method was demonstrated by determining anionic surfactants in tap, river and swamp water, and raw and treated sewage. The mean recoveries obtained ranged between 99 and 101%. The SDBD method offers important advantages over the classical MB method: it is more sensitive, selective, precise, simple and rapid; the analytical response is independent of the molecular structure of the anionic surfactants, and the volume of sample required for analysis and the consumption of organic solvents are significantly reduced.     

QSPR方法预测阴离子表面活性剂亲水亲油平衡值

首次使用量子化学描述符, 建立了两种阴离子表面活性剂亲水亲油平衡(HLB)值的定量结构性质关系模型(QSPR). 最佳模型1包括四类不同结构的烷基硫酸盐和烷基磺酸盐46种阴离子表面活性剂, 复相关系数R²＝1.000. 又建立了包含聚氧乙烯、乙酸、丙酸和碳氟等特殊类型不同结构的73种阴离子表面活性剂的最佳模型2, 复相关系数 R²＝0.993.