原子转移自由基聚合制备新型接枝聚α-D-吡喃半乳糖苷色谱固定相及其性能

以2-溴异丁酰溴为引发剂,CuCl/CuC12/Me6TREN为催化体系,在室温条件下采用原子转移自由基聚合(ATRP)法将单体6-O-甲基丙烯酰基-1,2,3,4-双-O-亚异丙基-α-D-吡喃半乳糖苷(6-O-methacryloyl-1,2,3,4-di-O-isopropylidene-α-D-galactop...     

原子转移自由基聚合技术用于以单分散树脂为基质的温敏色谱固定相的制备及性能评价

以α-溴异丁酰溴为引发剂,CuCl/CuCl2/2,2′-联二吡啶(Bpy)为催化体系,在室温条件下通过原子转移自由基聚合(ATRP)使N-异丙基丙烯酰胺(NIPAM)键合在单分散交联聚甲基丙烯酸环氧丙酯树脂（PGMA/EDMA 树脂）表面,制备了具有温敏性的聚合物色谱填料,并用元素分析、红外光谱等对其进行了表征;详细考察了该填料对芳香烃化合物的分离性能、温敏性能、稳定性和重现性。元素分析得出NIPAM单体的接枝率为10.4%;通过改变温度,可以有效地分离对羟基苯甲醛、邻甲酚和4-丁基苯胺3种混合物。结果表明,所合成的固定相具有很好的色谱性能和温敏性能,稳定性和重现性良好。     

ATRP法制备两亲性嵌段共聚物的研究

以α 溴代丙酸乙酯 (EPN Br)为引发剂、氯化亚铜 (CuCl)和联二吡啶 (bpy)组成的混合体系为催化剂 ,引发苯乙烯聚合 ,得到了端基为卤原子的单分散聚苯乙烯 (PS X)预聚体 .以此PS X为大分子引发剂、CuCl和N ,N ,N′ ,N″ ,N″ 五甲基二亚乙基三胺 (PMDETA) bpy的混合体系为催化剂 ,引发N ,N 二甲基丙烯酰胺(DMAA)聚合 ,得到了分子量分布较窄的聚苯乙烯 b 聚N ,N 二甲基丙烯酰胺 (PS b PDMAA)两亲性嵌段共聚物 .考察了大分子引发剂的分子质量、聚合介质及配位剂等对聚合过程的影响 .并用GPC、IR、1 H NMR等对产物进行了表征 .研究结果表明 ,该聚合反应体系符合原子转移自由基聚合的特征 .     

凝胶渗透色谱-固相萃取结合色谱-质谱法测定乳制品中18种溴系阻燃剂

采用索氏提取、凝胶渗透色谱和固相萃取技术作为前处理方法,建立乳制品中6种新型溴系阻燃剂、8种多溴联苯醚、四溴双酚A和α、β、γ-六溴环十二烷异构体共18种溴系阻燃剂的同时提取与净化方法,并结合气相色谱-负化学源质谱法(GC-NCI/MS)和高效液相色谱-电喷雾电离-串联质谱法(HPLC-ESI-MS/MS)进行检测。奶样经冷冻干燥后以正己烷-丙酮(1：1, V/V)索氏提取,采用凝胶渗透色谱结合酸化硅胶柱净化,随后以LC-Si固相萃取柱分离气相和液相待测物。以GC-NCI/MS测定6种新型溴系阻燃剂和8种多溴联苯醚,以HPLC-MS/MS检测四溴双酚A和六溴环十二烷异构体,内标法定量。结果表明,以空白牛奶样品为加标基质,多数待测物平均回收率为80.1%~114.7%,方法具有良好的精密度(多数待测物相对标准偏差( RSD)在0.87%~14.9%)和灵敏度(检出限在0.2~119.2 pg/g之间),可满足乳制品中多种溴系阻燃剂同时提取、净化和检测需求。     

原子转移自由基聚合技术制备新型手性配体交换色谱固定相及对手性化合物的拆分

采用原子转移自由基聚合(ATRP)技术, 以溴代硅胶为引发剂, CuCl/2,2'-联吡啶(Bpy)为催化体系, 水为溶剂, N-丙烯酰基-L-脯氨酸为单体, 室温下在硅胶表面进行聚合反应, 制得硅胶接枝聚N-丙烯酰基-L-脯氨酸分子刷. 通过改变ATRP反应体系中单体的量, 制备了3种不同键合量且键合量可控的手性配体交换色谱固定相, 利用元素分析和热重分析对其进行表征. 考察了配体接枝率、 流动相Cu²⁺浓度、 pH值和柱温等对DL-氨基酸和α-羟基酸拆分的影响, 优化了色谱分离条件, 探讨了拆分过程的热力学. 结果表明, 所合成的手性配体交换色谱固定相能够分离9种DL-氨基酸和α-羟基酸, 其中DL-酪氨酸、 DL-色氨酸和DL-苏氨酸3种氨基酸可同时进行拆分, 且拆分过程由熵控制.     

机理转移法合成星形梳状聚丁二烯-g-聚甲基丙烯酸甲酯共聚物的研究

结合活性负离子聚合与原子转移自由基聚合(ATRP),采用机理转移法制备了一系列窄分布且分子量可控的星形梳状聚丁二烯-g-聚甲基丙烯酸甲酯接枝共聚物(SC-(PB-g-PMMA)).首先通过阴离子聚合,制备星形聚丁二烯,后经甲酸-过氧化氢原位环氧化对链中部分双键进行环氧化,再与原位生成2-溴异丁酸发生酯化反应,得到具有链中活性溴的星形大分子引发剂(SPB-Brn).然后,利用该大分子引发剂,采用CuCl/CuCl2/PMDETA催化体系,通过ATRP聚合单体MMA,合成出星形梳状SC-(PB-g-PMMA)聚合物.通过GPC,1H-NMR和FTIR等分析手段对合成的星形大分子引发剂及星形梳状聚合物进结构表征,证实得到目标产物,并同时研究了聚合物的热力学性质与溶液性质.     

原子转移自由基聚合法制备新型亲水作用色谱固定相及其性能评价

以自制的6.0μm单分散大孔交联聚氯甲基苯乙烯-二乙烯基苯(Poly(4-vinylbenzylchloride-co-divi-nylbenzene),PCMS/DVB)微球为基质和引发剂,CuCl和自行合成的三[(2-二甲基氨基)乙基]胺(Tris[2-(dimeth-ylamino)ethyl]amine,Me6TREN)组成混合催化体系,使4-乙烯基吡啶(4-Vinyl pyridine,4-VP)在甲苯中进行原子转移自由基聚合,制得4-乙烯基吡啶聚合物,单体4-乙烯基吡啶的接枝率为8.55%。将该聚合物与正溴丁烷反应制得新型亲水色谱固定相。在亲水作用色谱模式下,流速1 mL/min,乙腈-水为流动相可分离5种芳胺化合物和4种酚类化合物。在离子交换色谱模式下,6 mmol/L Na2CO3-5.5 mmol/L NaHCO3为淋洗液可分别分离5种无机阴离子和4种短链有机酸。结果表明,此固定相对极性化合物和无机阴离子具有良好的分离性能,是一种性能优异的亲水作用色谱固定相。     

氧在CuCl(111)表面吸附的密度泛函理论研究

运用广义梯度密度泛函理论的PW91方法结合周期平板模型,在DNP基组下研究了氧分子和氧原子在CuCl(111)表面上的吸附.对氧分子在CuCl(111)表面吸附的相关计算和比较发现,覆盖度为0.25单层时的吸附构型为稳定的吸附构型,氧分子倾斜地吸附在CuCl(111)表面的顶位时比较稳定,吸附后O2分子的伸缩振动频率与自由O2分子相比发生了红移.态密度和Mulliken电荷布居分析结果表明,整个吸附体系发生了由Cu原子向O2分子的电荷转移.氧原子在CuCl(111)表面吸附的计算结果表明,氧原子倾向于以穴位(hollow)吸附在CuCl(111)表面,通过Mulliken电荷布居和态密度分析对氧原子在CuCl表面的吸附行为作了进一步探讨.     

甲基丙烯酸(N,N-二甲氨基)乙酯的自引发催化氧化聚合

作为一种自身还原性单体,甲基丙烯酸(N,N-二甲氨基)乙酯(DMAEMA)可与部分氧化剂构成氧化还原引发剂体系,并引发自身的聚合.为验证该假设,进行了以CuCl2络合物催化DMAEMA的本体氧化聚合.动力学研究表明,所得聚合物的分子量随着聚合时间的延长而逐渐增加.核磁波谱分析表明,低转化率下所得低聚物同时含有甲基丙烯酸酯末端和C-Cl端基,显示DMAEMA的二甲氨基(N-CH3)被CuCl2氧化成单体自由基(N-CH2·),并通过原子转移自由基聚合(ATRP)机理形成聚合物.由于叔胺广泛地用作ATRP的络合物,由此可见,在传统ATRP体系中,来自CuCl2/叔胺的氧化还原引发不可忽略.     

酚氧基联烯基醚单体的原子转移自由基聚合研究

以具有较高活性的酚氧基联烯基醚(POA)和对叔丁基酚氧基联烯基醚(t-BuPOA)为研究对象, 研究了不同引发 剂/配体体系对其原子转移自由基(ATRP)聚合行为的影响. 发现在2-溴代丙酸甲酯/溴化亚铜/4,4’-二庚基联吡啶(2-MBP/CuBr/dHbpy)和对甲苯磺酰氯/溴化亚铜/三-(N,N-二甲基氨基乙基)胺(p-TsCl/CuBr/Me6TREN)两种ATRP反应体系中, POA的聚合都遵循ATRP反应的机理.     

Preparation of poly(vinyltetrazole) chain-grafted poly(glycidymethacrylate-co-ethylenedimethacrylate) beads by surface-initiated atom transfer radical polymerization for the use in weak cation exchange and hydrophilic interaction chromatography

A novel stationary phase for weak cation exchange (WCX) and hydrophilic interaction chromatography (HILIC) was prepared with surface-initiated atom transfer radical polymerization (SI-ATRP). Vinyltetrazole was grafted onto the surface of the beads in water medium with the polyglycidylmethacrylate beads (P_GMA/EDMA) previously modified with 2-bromoisobutryl bromide as the macromolecule initiators and CuCl as catalyst. The poly(vinyltetrazole)-grafted beads obtained with different atom transfer radical polymerization (ATRP) formulations were tried as chromatographic packings in ion-exchange chromatography. The results showed that the prepared columns could separate the tested proteins with high efficiency and high capacity, and the retention time of protein had a positive relationship with increasing the chain lengths of the grafted poly(vinyltetrazole) (PVT). The prepared column was also found to be able to separate nucleosides by hydrophilic interaction chromatographic mode.     

Preparation of Medium Cation Exchange Stationary Phase of Polymeric Matrix and Their Chromatographic Properties

Based on the monodisperse poly（glycidyl methacrylate-co-ethylenedimethacrylate） beads （PGMA/EDMA） with macropore as a medium, a new hydrophilic medium cation exchange （MCX） stationary phase for HPLC was synthesized by a new chemically modified method. The stationary phase was evaluated with the property of ion exchange, separability, reproducibility, hydrophilicity, effect of salt concentration, salt types, column loading and pH on the separation and retention of proteins in detail. It was found that it follows ion exchange chromatographic （IEC） retention mechanism. The measured bioactivity recovery for lysozyme was （96 ± 5）%. The dynamic protein loading capacity of the synthesized MCX packings was 21.8 mg/g. Five proteins were almost completely separated within 6.0 min at a flow rate of 4 mL/min using the synthesized MCX resin. The MCX resin was also used for the rapid separation and purification of lysozyme from egg white with only one step. The purity and specific bioactivity of the purified lysozyme was found more than 95% and 70345 U/mg, respectively.     

Preparation of High‐capacity,Monodisperse Polymeric Weak Cation Exchange Packings Using Surface‐initiated Atom Transfer Radical Polymerization and Its Chromatographic Properties

A novel stationary phase for weak cation exchange (WCX) chromatography was prepared by "grafting from" strategy. Surface initiated atom transfer radical polymerization (ATRP) of acrylic acid (AA) was conducted in toluene medium, starting from the macromolecule initiators of poly(4‐vinylbenzyl chloride‐co‐divinylbenzene) (P_CMS/DVB) beads. The amounts of poly(acrylic acid) grafted chains with different ATRP formulations were calculated based on the elemental analyses. The poly(acrylic acid) grafted beads obtained with different ATRP formulations were tried as chromatographic packings in the separation of proteins by ion‐exchange chromatography. The effect of the poly(acrylic acid) grafted chain lengths on P_CMS/DVB beads for the separation of proteins was investigated in details. Simultaneously, characterization of the column was investigated as ion chromatographic stationary phase for the separation of inorganic cations. The results show that poly(acrylic acid) grafted columns had excellent performance for separation of proteins and inorganic cations. The highest of the dynamic capacity of the column was 35.55 mg/mL. The columns were provided with high column efficiency.     

单分散大孔亲水弱阳离子交换填料的制备及其对鱼精蛋白的分离纯化

以自制的5.0 μm单分散大孔亲水交联聚甲基丙烯酸环氧丙酯(PGMA/EDMA)微球为基质,对其表面进行化学改性,合成弱阳离子交换色谱填料(WCX)。详细考察了该填料对标准蛋白质的分离性能、表面亲水性能、稳定性和重现性以及流速对蛋白保留的影响。实验结果表明,该色谱填料对蛋白的分离性能、重现性及稳定性良好;在流速为3 mL/min时,采用线性梯度洗脱,6 min内可分离4种标准碱性蛋白质,以溶菌酶测定的该填料的动力学吸附容量为29.86 mg/g。将其用于鱼精蛋白的分离纯化,经反相高效液相色谱测定纯化后鱼精蛋白的纯度为99.2%;与商品Shodex IEC SP-825强阳离子交换色谱柱比较,纯化结果几乎一样。     

Influence of graft interface polarity on hydration/dehydration of grafted thermoresponsive polymer brushes and steroid separation using all-aqueous chromatography

We have prepared poly( N-isopropylacrylamide) (PIPAAm) brush-grafted surfaces with varied temperature-responsive hydrophobic properties through surface-initiated atom transfer radical polymerization (ATRP). These temperature-responsive surfaces were characterized by chromatographic analysis using modified silica beads as a chromatographic stationary phase in aqueous mobile phase. Mixed silane self-assembled monolayers (SAMs) comprising ATRP initiator and silanes with various terminal functional groups were formed on the silica bead surfaces. IPAAm was then polymerized by ATRP using the CuCl/CuCl2/Me6TREN catalyst system in 2-propanol at 25 degrees C for 16 h. The chromatographic retention behavior of steroids on the resulting PIPAAm brushes made on more polar silane components was distinct from that on more apolar silane interfaces. Retention times for steroids on PIPAAm mixed apolar silane graft interfaces were significantly longer than those on analogous polar silane interfaces due to enhanced dehydration of PIPAAm brushes on apolar silane-grafted surfaces. Changes in retention factor, k', on polar silane PIPAAm-grafted interfaces were relatively large compared to that on apolar PIPAAm grafted interfaces due to larger hydration/dehydration alterations of grafted PIPAAm brushes on the former surfaces. Applied step-temperature gradients from 50 to 10 degrees C show that PIPAAm brushes on polar silane interfaces tend to hydrate more, leading to shorter retention times. In conclusion, the polarity of the grafted interface significantly influences the grafted PIPAAm brush hydration/dehydration characteristics and subsequently also the temperature-modulated separation of bioactive compounds in all-aqueous chromatography.     

无孔单分散亲水性中强阳离子交换树脂的制备及其在蛋白质快速分离中的应用研究

以3.0μm无孔单分散亲水性交联聚甲基丙烯酸环氧丙酯树脂为基质,将其表面经新的化学方法改性后制备了一种新型的无孔中强阳离子交换色谱填料。详细考察了该无孔填料对标准蛋白分离性能,有机溶剂、pH、流动相盐种类和流速等对蛋白质保留的影响。实验结果表明,在流速为4 mL/min时,线性梯度时间在2.0 min内可快速分离4种标准蛋白,蛋白质的保留符合阳离子交换色谱规律。将其应用于快速纯化鸡蛋清中的溶菌酶,取得较好效果。     

高亲水性强阳离子交换色谱填料的制备及其在蛋白质分析中的应用

以具有双孔结构的聚甲基丙烯酸环氧丙酯(PGMA)微球为基质,以葡萄糖进行表面亲水改性,制备了强阳离子交换色谱填料,并将其用于复杂生命体系中生物大分子的快速而高效的分离、分析与纯化。葡萄糖亲水改性增进了填料的生物相容性,提高了蛋白质样品的回收率;双孔结构及较高的比表面积赋予填料良好的柱渗透性和样品负载量。以标准蛋白质为样品,考察了该填料对生物样品的分离性能。以100 mm×4.6 mm的色谱柱分离4种蛋白质,在6 min内实现了基线分离;以溶菌酶为样品,填料的吸附容量为39.5 g/L,在蛋白质快速分离纯化分析中显示了良好的应用前景。     

新型超支化接枝共聚物的合成

以对氯甲基苯乙烯(CMS)为活性单体,CuCl/2,2′-联吡啶(bpy)为催化体系,利用原子转移自由基聚合(ATRP)方法,制备具有不同支化度的超支化聚对氯甲基苯乙烯(h-PCMS, 4);以4为大分子引发剂,引发第二单体进行聚合,合成了两个以4为核的新型星状多臂共聚物,其结构经¹H NMR, IR和GPC表征。     

Hydrophilic Modification of Microporous Polysulfone Membrane via Surface‐Initiated Atom Transfer Radical Polymerization and Hydrolysis of Poly(glycidylmethacrylate)

Poly(glycidylmethacrylate) (PGMA) brushes were grafted from chloromethylated polysulfone (CMPSF) membrane surface by surface‐initiated atom transfer radical polymerization (SI‐ATRP), and the grafting was followed by hydrolysis of epoxy groups in the grafting chains to improve the membrane's hydrophilic property. Fourier transform infrared spectroscopy (FT‐IR) and X‐ray photoelectron spectroscopy (XPS) measurements confirmed the successful grafting and hydrolysis of PGMA. The grafting degree of the monomer, measured by periodic acid titration and gravimetric analysis, increased linearly with the polymerization time, while the static water contact angle of the membrane grafted with PGMA or hydrolyzed PGMA linearly decreased. In comparison with the PGMA‐grafted membranes, the hydrolyzed PGMA‐grafted membranes possess stronger hydrophilicity as indicated by their contact angle and hydration capacity, and as a result they have an improved antifouling property. Therefore, the control of the hydrophilicity of PSF membrane could be realized through adjusting the polymerization time and transforming the functional groups in the grafting chain.