一例多钒酸盐杂化材料的制备及高效催化烯烃环氧化

以2-(2-吡啶基)咪唑(pIM)、Co²⁺和NaVO₃为原料,在水热条件下,制备了新的钒氧簇化合物[Co (pIM) V₂O₆](1)。采用X射线单晶衍射、粉末X射线衍射、傅里叶变换红外光谱和元素分析等方法对化合物进行了表征。单晶解析表明,该化合物由VO₄四面体和CoO₃N₂四方锥通过氧原子共边、共角连接成二维结构。基于钒氧簇在催化氧化体系中的高效活性,1作为非均相反应的催化剂,在以H₂O₂为氧化剂的催化烯烃环氧化反应中表现出优秀的催化性能,催化剂能够多次重复使用且活性基本保持不变。此外,磁化率研究表明1中存在反铁磁相互作用。     

单核钌催化剂化学催化和光催化水氧化反应

合成了一系列含有不同对位取代基团的吡啶轴向配体的单核钌化合物Ru(bda)(pic)₂ (H₂bda=2,2''-联吡啶-6,6''-二羧酸; pic=对甲基吡啶),对化合物的结构进行了核磁、质谱和X射线单晶衍射表征,并在中性和酸性条件下研究了这些化合物的电化学性质.以硝酸铈铵为氧化剂,对催化剂的催化活性进行了测试,并以[Ru(bpy)₃]²⁺为光敏剂,S₂O₈^2-为电子牺牲剂,在三组分体系中考察了这些化合物的光催化活性.研究发现,在化学法水氧化反应中,化合物1由于其轴向配体4,4''-联吡啶在酸性条件下能够发生质子化,从而增强了吸电子效应,因此表现出最高的催化活性,催化循环数达到4000.在光催化水氧化反应中,化合物2因其轴向配体具有最强的吸电子能力而表现出最高的催化活性,反应2h的催化循环数达到270.结果表明,轴向配体的吸电子能力明显提高了这类Ru催化剂催化水氧化反应活性.     

PdCl2-CuCl2/Al2O3催化剂低温催化CO氧化的失活机理

采用X射线衍射、N₂吸-脱附、X射线光电子能谱分析、氢气-程序升温还原和原位红外漫反射等方法对新鲜和失活的PdCl₂-CuCl₂/Al₂O₃低温催化CO氧化催化剂进行表征,研究了高相对湿度(100%)下催化剂的失活机理.结果表明,催化剂表面沉积的水使得活性铜物种容易从催化剂表面向载体孔道内部迁移,由于Pd、Cu相互作用弱化从而减弱了Pd与Cu物种间的相互作用,使得催化剂的氧化还原性能受到影响,抑制了Pd⁰再氧化为Pd²⁺的过程,从而因CO氧化反应中催化剂氧化还原循环受阻而导致失活.     

焙烧与预处理条件对 Co3O4 催化氧化 CO 性能的影响

采用沉淀法制备了 Co₃O₄, 考察了焙烧和预处理条件对其结构、低温催化氧化 CO 性能的影响. 热重分析表明, 未经焙烧的样品以 Co(OH)₂CO₃ 的形式存在, 150~400 ^oC 空气气氛中焙烧后, 样品以立方相 Co₃O₄ 的形式存在. N2 吸附-脱附法、X 射线衍射、透射电镜及活性测试结果表明, 以纳米颗粒物存在的 Co₃O₄ 的比表面积、颗粒尺寸、催化氧化 CO 活性与焙烧温度密切相关. 正电子湮没寿命谱、O₂-程序升温脱附与定温条件下 CO 氧化测试结果表明, 合适温度 (150~250 ^oC) 下 N₂ 预处理有利于 Co₃O₄ 表面氧空穴团的形成, 它在吸附活化分子氧以及 CO 催化氧化反应中起到关键作用. 同时讨论了预处理作用下Co₃O₄表面氧空穴的再构机制.     

三核钨簇合物-V2O5催化剂对苯乙烯氧化反应的催化

本文研究了三核钨簇合物［W₃O₂(CH₃CO₂)₆(H₂O)₃］Br₃·2H₂O与一些物质组成的二元催化剂对苯乙烯氧化反应的催化作用,结果表明：钨簇合物-V₂O₅催化剂对苯乙烯氧化反应的催化效果特别显著,而且在反应前后其重量、结构及催化活性基本不变,可以多次回收重复使用。对影响钨簇合物-V₂O₅催化剂催化性能的几个因素进行了讨论,测定了催化剂及其吸附氧气的红外光谱,说明钨簇合物及V₂O₅可以与O₂形成分子氧配合物及超氧(O^-₂)配合物。     

Ce0.5+xZr0.4-xLa0.1O2-Al2O3催化剂催化燃烧柴油车碳烟

采用共沉淀法制备了系列Ce_0.5+xZr_0.4-xLa_0.1O₂-Al₂O₃催化剂, 其中0≤x≤0.4且Ce_0.5+xZr_0.4-xLa_0.1O₂与Al₂O₃的质量比为1:1. 考察了该系列催化剂对柴油车排放碳烟的催化燃烧性能, 并用低温N2吸附-脱附、X射线衍射(XRD)、X射线光电子能谱(XPS)、氢气程序升温还原(H₂-TPR)和氧气程序升温脱附(O₂-TPD)等手段对催化剂进行了表征. 研究结果表明该系列催化剂均形成了具有立方萤石结构的固溶体. 当x=0.2时, Ce³⁺离子在催化剂表面有一定的富集, 此时催化剂具有最大的β氧脱附峰和最好的表面还原性能, 同时具有良好的催化碳烟氧化活性, 碳烟在该催化剂的起燃温度为360 °C, 具有较好的应用前景.     

SO42-/SnO2-Fe2O3固体酸催化下的环酮Baeyer-Villiger氧化反应及缩合反应

采用共沉淀的方法制备了不同Fe 掺杂量的SO₄^2-/SnO₂-Fe₂O₃固体超强酸催化剂. 利用傅里叶变换红外(FTIR)光谱, 粉末X射线衍射(XRD), N₂吸附-脱附实验(BET), 热重(TG)分析和扫描电镜(SEM)等方法对样品进行了表征. 考察了所得催化剂对4-叔丁基环己酮与乙二醇缩合反应的催化性能. 实验结果表明, 与未经过掺杂改性的SO₄^2-/SnO₂固体酸催化剂相比, 改性后催化剂的催化性能得到了改善. 研究了以Fe/Sn 摩尔比为0.5的SO₄^2-/SnO₂-Fe₂O₃固体酸为催化剂, 部分醛酮类化合物与乙二醇及1,2-丙二醇的缩合反应. 考察了反应时间、催化剂用量等因素对反应的影响. 同时, 将所得催化剂应用于环酮Baeyer-Villiger 氧化反应中, 催化剂表现出良好的催化活性, 且催化剂具有一定的循环使用性.     

K3Na5(H2NCH2CH2NH3)2{(VO)12O6[B3O6(OH)]6}(H2O)•12H2O的合成与晶体结构

利用水热合成技术成功制备出一种新型多钒硼氧化合物， 用X射线单晶衍射分析技术对其晶体结构和分子结构进行了确定。结果表明在该化合物中多钒硼氧阴离子具有一个新颖的三明治结构。上下两个结构单元都是由六个VO₅四角锥交替地通过顺式和反式共边的方式连接起来构成的一个钒氧三角形结构。中间的结构单元是由BO₃平面三角形和BO₄四面体以共角的方式相互连接形成的一个折叠型的B₁₈O₃₆(OH)₆环。三明治结构中层与层之间通过桥氧相连。一个水分子处于它的核心位置上，与每个VO₅四角锥中的钒原子都保持几乎相等的距离。该化合物及其晶体中存在着丰富的化学结构和成键信息，同时也有作为氧化还原反应催化剂的潜能。     

Ce助剂对V/SiO2催化CO2氧化乙苯脱氢性能的影响

通过N₂吸附、X射线衍射(XRD)、X射线光电子能谱(XPS)、H₂程序升温还原(H₂-TPR)、CO₂程序升温脱附(CO₂-TPD)和热重分析(TGA)等多种表征手段和催化反应性能评价,研究了铈助剂的添加对V/SiO₂催化CO₂氧化乙苯脱氢性能的影响. 结果表明,Ce助剂不仅提高了催化剂活性组分分散性和氧化还原性能,抑制了钒物种的深度还原,而且增强了催化剂碱性和CO₂吸附能力,减缓了积炭生成,从而显著提高了V-Ce/SiO₂对CO₂氧化乙苯脱氢反应的催化活性和稳定性. 在本实验中,V(0.8)-Ce(0.25)/SiO₂催化剂表现出最佳的催化性能,苯乙烯(ST)收率可达55.6%,选择性为98.5%,反应12 h 后,催化剂活性基本不变,与惰性N₂气氛比较,CO₂明显促进了乙苯脱氢反应,归因于CO₂能保持催化剂表面钒物种的高价态.     

(CeO2)x-(La-Al2O3)1-x复合氧化物对柴油车尾气中可溶性有机成分的催化氧化

采用共沉淀法制备了一系列(CeO₂)_x-(La-Al₂O₃)_1-x复合氧化物(其中x为质量分数, x=0.00, 0.25, 0.50, 0.75, 1.00), 以其为催化剂. 采用热重-差热分析(TG-DTA)法模拟测试该系列催化剂对柴油车尾气中可溶性有机成分(SOF)的催化氧化性能. 结果表明, 当x=0.75时, 催化剂活性最高, 可使SOF在125℃起燃, 355℃完全转化. 并用低温N₂吸附-脱附, 储氧量(OSC)测试, X射线衍射(XRD), X射线光电子能谱(XPS)和H₂程序升温还原(H₂-TPR)等手段对催化剂进行了表征. 研究结果表明, 适量La 和Al 共掺杂增大了氧化铈的比表面积和催化剂中Ce³⁺所占的比例, 从而提高了催化剂对SOF的低温吸附能力和催化剂的储释放氧能力, 因而提高了催化剂对SOF的氧化活性. 所制备的(CeO₂)_0.75-(La-Al₂O₃)_0.25复合氧化物适合应用到柴油车尾气净化催化剂中.     

A novel oxovanadate structural type – Synthesis,single crystal structure and magnetic properties of a mixed-valence polyoxovanadate formed by {V17O40(Cl)} and {V15O36(Cl)} clusters

A novel polyoxovanadate structural type, with an average nuclearity of V₁₆, formed by a mixture of two different polyoxovananadates: {V₁₅O₃₆(Cl)} and{V₁₇O₄₀(Cl)} has been synthesized and characterized. The title compound, formulated as [Ni(phen)₃]₂{[V₁₅O₃₆(Cl)]_0.5[V₁₇O₄₀(Cl)]_0.5} · H₂O (1) (phen = 1,10′-phenanthroline), presents two different polyoxovanadate architectures: {V₁₅O₃₆(Cl)} and {V₁₇O₄₀(Cl)}, with the last one representing a new framework type in polyoxovanadate chemistry. Here, we present the synthesis of this novel polyoxovanadate under hydrothermal conditions and its characterization by IR and XPS spectroscopies, elemental and thermogravimetric analysis, redox titration, magnetic measurements and single-crystal X-ray diffraction.     

Thermal Decompositions of the Molybdotellurates of Nickel(II) and Cobalt(II)

Molybdotellurates [M(H₂O)₆]₃·[TeMo₆O₂₄], with M=Ni(II) and Co(II), were synthesized and characterized by single-crystal X-ray diffraction for compound 1 and X-ray powder diffraction for compound 2, EDAX, IR, electronic spectra in the solid phase and in solution, and magnetic properties. Thermogravimetry and differential scanning calorimetry of both compounds revealed a loss of 11 water molecules through an endothermal process with ΔH=800 kJ mol⁻¹ for the nickel compound and ΔH=833 kJ mol⁻¹ for the cobalt compound. The residual compounds were characterized by chemical analysis, IR and XPS spectroscopy This revised version was published online in July 2006 with corrections to the Cover Date.     

Preparation,characterization and thermal behaviour of samarium(III) cyclotriphosphate(V), SmP3O9·5H2O

A new samarium cyclotriphosphate pentahydrate powder, SmP₃O₉·5H₂O, has been prepared using a classical chemistry method and characterized by X-ray diffraction (XRD), thermogravimetric analysis (TG) and infrared spectroscopy. The IR spectrum shows the characteristic bands of cyclotriphosphates as the triplet in the range 1330-1250 cm^-1. The results of differential thermal analysis, X-ray powder diffraction and IR spectra of the compound heated at different temperatures showed that, after dehydration, SmP₃O₉·5H₂O decomposes to form an amorphous compound, which, then crystallises at 873 K and give the polyphosphate Sm(PO₃)₃. This revised version was published online in July 2006 with corrections to the Cover Date.     

Chemical preparation and thermal behaviour of neodymium cyclotriphosphate tetrahydrate NdP3O9·4H2O

A new neodymium cyclotriphosphate tetrahydrate NdP₃O₉·4H₂O has been prepared using a classical method of aqueous chemistry and characterized by X-ray diffraction (XRD), thermogravimetric analysis (TG) and infrared spectroscopy which shows the characteristic bands of cyclotriphosphates as the triplet in the 1340–1260 cm⁻¹ area. The results of differential thermal analysis, X-ray powder diffraction and IR spectrum of the compound heated at different temperatures showed that, after dehydration, NdP₃O₉·4H₂O decomposes into an amorphous compound with a dehydration energy equals to 0.162 kJ g⁻¹, then it crystallises at 925 K in order to give the polyphosphate Nd(PO₃)₃.     

Synthesis and characterization of a three-dimensional framework built up of paradodecatungstate-B clusters and transition metals as linkers

A novel paradodecatungstate compound, namely [Na₂(H₂O)₁₀][Cu₄(H₂O)₁₂(H₂W₁₂O₄₂)]·15H₂O (1) has been synthesized by convenient aqueous solution method and structurally characterized by single-crystal X-ray diffraction, IR spectra, elemental analysis, thermogravimetric analysis, and differential thermal analysis. Single-crystal X-ray diffraction reveals that in compound 1, the [H₂W₁₂O₄₂]^10? anions are connected via divalent copper cation as purely inorganic linker to form a three-dimensional structural network. In addition, compound 1 exhibits strong photoluminescent emission at room temperature.     

Synthesis and Characterization of a Novel Organic/Inorganic Hybrid Based on Octamolybdates and Benzimidazole Molecules [Hbenzimi]4 [(benzimi)2Mo8O26] · 2H2O (benzimi?=?benzimidazole)

A novel organic/inorganic compound [Hbenzimi]₄[(benzimi)₂Mo₈O₂₆] · 2H₂O (1) has been prepared hydrothermally and characterized by elemental analyses, i.r., x.p.s., t.g. and single crystal X-ray diffraction. The single crystal X-ray diffraction analysis reveals that compound (1) consists of the [Mo₈O₂₆]⁴⁻ cluster as the structural motif covalently linked by benzimidazole molecules and protonated benzimidazole molecules as charge compensation cations. It is interesting that the benzimidazole molecules were synthesized from 1,2-phenylenediamine and oxalic acid. The [Mo₈O₂₆]⁴⁻ polyoxoanions and organic ligands in compound (1) interact with each other via extensive hydrogen bonds to form a three-dimensional supramolecular framework.     

A Self-Assembled 3D Hydrogen Bonded Network Constructed from Polyoxovanadate and Protonated Organic Substrate With a Solvent Hydrolysis Reaction

A self-assembled 3D hydrogen bonded network constructed from polyoxovanadate and organic substrate [V₁₀O₂₈][(CH₃)₂NH₂]₄(imidazolium)₂ (1) has been synthesized at room temperature and characterized by elemental analysis, IR and single-crystal X-ray diffraction. The structure of 1 can be regarded as being linked by the dimethylammonium cations of the decavanadate clusters to produce an interesting 3D network with a 4¹²6³ topology. In the resulting network, there exist one-dimensional channels along the a-axis, in which the imidazolium cations filled the channels. These imidazolium cations are involved in intermolecular hydrogen bonds of the types N–H···O and C–H···O, which seem to be main forces to stabilize the holistic structure.     

A novel polyoxometalate chain constructed from sandwich lanthanide-containing polyanions [Pr(PW<Subscript>11</Subscript>O<Subscript>39</Subscript>)<Subscript>2</Subscript>]<Superscript>11−</Superscript> and sodium cation linkers

A novel sandwich-type lanthanide polyoxometalate [(CH₃)₄NH]₄Na₃[Pr(PW₁₁O₃₉)₂] · 12H₂O (1) has been synthesized by conventional method and characterized by cyclic voltammetry, IR spectroscopy and single crystal X-ray diffraction. X-ray diffraction result reveals that the sandwich type polyanions are linked by sodium cations to form a structure of zigzag chains, and the chains are further connected into an extensive two-dimensional (2D) framework depending on hydrogen bond. The emission spectrum result shows weak photoluminescence of compound 1. The magnetic studies of compound 1 demonstrate an antiferromagnetic interaction in 1.     

A new decavanadate polyoxovanadate nanocluster: synthesis,characterization and rapid adsorption of methylene blue

A new decavanadate polyoxovanadate nanocluster, [2-ampH]₆[V₁₀O₂₈]?2H₂O (1), was synthesized through reaction between ammonium vanadate and 2-aminopyridine at pH = 2. Nanocluster 1 was characterized by IR, elemental analysis, and X-ray crystallography. 1 was found to adsorb and desorb dyes and may have widespread application in wastewater treatment. The utility of 1 for adsorption of methylene blue was studied. The adsorbed dyes can be easily desorbed, and 1 has full efficiency after five cycles.