CeO2-TiO2复合氧化物的制备、表征及其对CO氧化的催化性能

采用溶胶-凝胶法制备了一系列不同n(Ce)/n(Ti)的CeO2-TiO2复合氧化物,对复合氧化物的物相结构、形貌特征、比表面积和氧化还原性质进行了表征,并考察了复合氧化物对CO氧化反应的催化性能.结果表明,n(Ce)/n(Ti)>0.10时,复合氧化物为无定形结构;n(Ce)/n(Ti)=0.10~0.30时,复合氧化物失去CeO2和TiO2各自的特征,形成CeO2-TiO2固溶体,具有较大的比表面积.CeO2-TiO2复合氧化物本身对CO氧化反应的催化活性不如TiO2或CeO2的高,但Pd/CeO2-TiO2比Pd/TiO2或Pd/CeO2具有更高的催化活性.     

高效 CeO2-MnOx-Al2O3催化剂的制备、表征及催化消除 NO性能

机动车在给人类生活带来便利的同时,也造成了严重的大气污染.其尾气净化成为人们关注的焦点.一氧化氮(NO)、一氧化碳(CO)和碳氢化合物(HCs)是机动车尾气中的三大典型污染物,主要通过三效催化(TWC)技术进行脱除. TWC技术涉及几个重要的催化反应,其中 CO催化还原 NO由于能够同时消除 CO和 NO两种污染物而引起研究者的极大关注.研究表明,负载型贵金属催化剂在该反应中显示出优异的催化性能,但存在资源匮乏、价格昂贵以及热稳定性欠佳等不足.因此,低价、高效的过渡金属氧化物催化剂成为近年研究重点.稀土金属氧化物 CeO2由于具有良好的氧化还原性能、较高的储释氧容量以及丰富的表面氧空位而被广泛用于 CO催化还原 NO反应.研究表明,对 CeO2进行离子掺杂可进一步增大其比表面积,改善其氧化还原性能和储释氧容量.并且,我们在先前的研究中还发现,将具有多种可变价态的钛离子或锡离子掺入 CeO2晶格由于掺杂离子能与 Ce4+/Ce3+发生电子转移而更有利于改善 CeO2的理化性质.此外,锰氧化物(MnOx)在氧化还原气氛中容易实现不同价态之间的切换,从而在一些重要的氧化还原反应中表现出优异的催化性能.近年来,有研究者将 CeO2与 MnOx相结合制备了 CeO2-MnOx催化剂用于 NO消除、碳烟燃烧和挥发性有机物(VOCs)氧化等反应,并取得一些有意义的结果.然而,对于实际应用来说, CeO2-MnOx催化剂存在比表面积偏小等不足.众所周知,γ-Al2O3是一种常用的具有高比表面积和高热稳定性的催化剂载体材料,可有效增大催化剂比表面积.我们前期研究结果表明,通过共沉淀法将 Al3+掺入铈基复合氧化物的晶格相比于以γ-Al2O3为载体更有利于改善铈基复合氧化物的理化性质和催化性能.因此,我们通过简单的氨水反滴加共沉淀法制备了一系列 CeO2-MnOx-Al2O3(Ce：Mn：Al摩尔比=6：4：x,x =0.25,0.5,1,2)复合氧化物催化剂用于 CO催化还原 NO反应.并运用 X射线衍射、拉曼光谱、氮气物理吸附、氢气程序升温还原、X射线光电子能谱以及原位漫反射红外光谱等表征技术对上述催化剂进行了系统分析.重点考察了 Al3+掺杂量对 CeO2-MnOx-Al2O3复合氧化物催化剂理化性质和催化性能的影响.结果表明,在 CeO2-MnOx复合氧化物中掺入少量 Al3+会导致其晶粒尺寸减小,从而增大其比表面积和孔体积,并增加 Ce3+和 Mn4+的含量.比表面积和孔体积增大有助于催化剂与反应物分子之间充分接触; Ce3+和 Mn4+含量增加能分别促进 CO物种吸附以及吸附态 NO物种脱附、转化和解离.这些变化有利于提高 CeO2-MnOx复合氧化物在 CO催化还原 NO反应中的催化性能.最后,基于催化剂的理化性质表征及其催化性能评价,我们尝试提出了一个可能的催化反应机理,以进一步理解 CeO2-MnOx-Al2O3复合氧化物催化剂在 CO催化还原 NO反应中的优异性能.     

柠檬酸络合法制备的Co/CeO_2催化剂上中温乙醇水蒸气重整性能(英文)

采用柠檬酸络合法制备了Co/CeO2及其钙掺杂系列催化剂,并对催化剂进行了低温N2物理吸附、X射线衍射、H2程序升温还原、傅里叶变换红外光谱、高分辨透射电镜表征以及乙醇水蒸气重整催化性能测试.结果表明,所制Co/CeO2催化剂具有良好的乙醇水蒸气重整催化性能,500oC时乙醇能全部转化为C1,氢气产率高达85%以上.Ca掺杂减小了载体CeO2纳米颗粒尺寸,但对还原后Co0尺寸的影响较小.当Ca掺杂量大于5.0%时,催化剂氧化还原性能和乙醇水蒸气重整催化性能下降.较高的还原温度有利于体相Ce4+还原为Ce3+,并且提高了催化活性,认为金属-氧化物边界的增加提高了催化活性.初步稳定性考察结果表明,5%钙掺杂后的催化剂具有更好的抗积炭性能.     

柠檬酸络合法制备的Co/CeO2催化剂上中温乙醇水蒸气重整性能（英文）

采用柠檬酸络合法制备了Co/CeO2及其钙掺杂系列催化剂,并对催化剂进行了低温N2物理吸附、X射线衍射、H2程序升温还原、傅里叶变换红外光谱、高分辨透射电镜表征以及乙醇水蒸气重整催化性能测试.结果表明,所制Co/CeO2催化剂具有良好的乙醇水蒸气重整催化性能,500oC时乙醇能全部转化为C1,氢气产率高达85%以上.Ca掺杂减小了载体CeO2纳米颗粒尺寸,但对还原后Co0尺寸的影响较小.当Ca掺杂量大于5.0%时,催化剂氧化还原性能和乙醇水蒸气重整催化性能下降.较高的还原温度有利于体相Ce4+还原为Ce3+,并且提高了催化活性,认为金属-氧化物边界的增加提高了催化活性.初步稳定性考察结果表明,5%钙掺杂后的催化剂具有更好的抗积炭性能.     

非晶态ZrO_2镶嵌的超细CeO_2催化HCl氧化

采用不同方法制备了铈锆复合氧化物催化剂用于催化HCl氧化反应。自发沉积策略制备的CeO_2@ZrO_2催化剂中,超细CeO_2纳米粒子均匀的镶嵌于非晶态ZrO_2中。CeO_2粒子显著的"尺寸效应"使得该催化剂具有更高的Ce~(3+)和氧空位浓度,而较高的Ce~(3+)和氧空位浓度使得催化剂具有优异的低温氧化还原性能和储释氧能力。催化性能测试表明,CeO_2@ZrO_2催化剂展现出最好的催化活性(1.90 gCl2·gcat~(-1)·h~(-1)),同时CeO_2粒子周围非晶态的ZrO_2阻碍CeO_2的高温烧结,提高了该催化剂的稳定性。     

复合氧化物CeO2-Co3O4催化氧化CO的性能

以共沉淀法制备CeO2-Co3O4复合氧化物，研究复合氧化物CeO2-Co3O4低温催化氧化CO的性能。通过采用热重分析（TG）、比表面积测试（BET）、X射线衍射分析（XRD）、程序升温还原（TPR）以及原位红外漫反射（FT-IR）等表征手段，详细探讨了铈含量对于复合氧化物CeO2-Co3O4低温催化氧化CO性能的影响。结果表明：复合氧化物CeO2-Co3O4催化氧化CO的性能明显优于单一氧化物CeO2和CO3O4，     

CeO2-TiO2混合氧化物及Pd/CeO2-TiO2催化剂的氧化还原性能

 以溶胶-凝胶-超临界流体干燥法制备了CeO2-TiO2混合氧化物(n(Ce)/n(Ti)=0.05～0.40),以其为载体,通过等体积浸渍法制备了Pd/CeO2-TiO2催化剂. XRD分析结果表明,在低Ce/Ti比的CeO2-TiO2混合氧化物中,CeO2高度分散于TiO2上; Ce/Ti比高于0.10时,大晶粒锐钛矿相TiO2和TiO2-CeO2固溶体或其前驱体无定形相共存. 采用H2-TPR对所合成材料的氧化还原性能进行了研究. H2-TPR谱中500 ℃附近的耗氢峰对应于CeO2-TiO2中CeO2的还原,还原过程中不存在表面晶格氧与体相晶格氧的差别. 由于TiO2与CeO2的协同作用,混合氧化物中形成了丰富的结构缺陷,提高了CeO2的氧化还原性能,其中Ce/Ti比为0.20时TiO2与CeO2的协同作用最显著. 负载上Pd后,载体中CeO2的还原温度(＜150 ℃)大大降低,同时随着Ce/Ti比的增大,PdO与载体间的相互作用增强,导致PdO难于还原,相应的H2-TPR还原峰向高温方向移动.     

负载型钙钛矿催化氧化NO及抗SO_2性能研究

采用柠檬酸络合浸渍法制备了负载型钙钛矿氧化物La1-xCexCoO3/CeO2(x=0~0.3)催化剂,考察了不同Ce掺杂量对其催化氧化NO和抗硫性能的影响,并运用X射线衍射(XRD)、傅里叶红外光谱(FT-IR)、氮气物理吸附、程序升温还原(H2-TPR)、氧气程序升温脱附(O2-TPD)等手段对催化剂进行了表征。结果表明,催化剂的活性与其比表面积大小和氧化还原性质密切相关;其中,负载型钙钛矿La0.8Ce0.2CoO3/CeO2催化剂在300℃时催化氧化NO的转化率达78%。在添加CeO2作载体后,不仅改善了非负载性钙钛矿的低温活性,而且抗硫性能也显著提高。     

纳米CeO2基固溶体催化柴油机碳颗粒物燃烧性能

采用柠檬酸溶胶鄄凝胶法制备CeO2基固溶体催化剂(Ce0.7Zr0.3O2-δ、Ce0.7Pr0.3O2-δ和Ce0.7Gd0.3O2-δ), 并考察了固溶体和三种常用载体(TiO2、SiO2和Al2O3)及其负载KNO3后的催化碳黑燃烧活性. 结果表明, CeO2基固溶体催化剂具有很高的催化燃烧活性, 其活性接近TiO2、SiO2和Al2O3负载30%KNO3催化剂的活性. 因为纳米CeO2基固溶体的形成, 提高了催化剂的抗烧结能力, 使氧更活泼, 从而提高氧化还原性能, 有利于碳颗粒燃烧. 由于CeO2基固溶体本身的高活性, 因此KNO3的添加不能明显提高CeO2基固溶体催化剂(尤其是Ce0.7Zr0.3O2-δ和Ce0.7Pr0.3O2-δ)的催化燃烧活性, 但KNO3能显著提高TiO2, SiO2和Al2O3的催化燃烧活性.     

Pt-TiO2/CeO2-MnO2复合催化剂光热降解气相苯

 用溶胶-凝胶法制备Ce-Mn储氧材料,并于该储氧材料上分别负载光催化剂TiO2 和贵金属Pt制备出Pt-TiO2/CeO2-MnO2复合催化剂. 用X射线衍射、 X射线能谱分析、程序升温还原和漫反射紫外-可见光谱等技术对复合催化剂进行了表征,并以光热催化降解气相苯评价了复合催化剂的活性. 结果表明, Mn分别进入到TiO2和CeO2的晶格中形成固溶体; Pt均匀分散在复合催化剂表面; Ce-Mn储氧材料在250 ℃下具有较好的储氧性能; 复合催化剂对紫外及可见光的吸收较强; 1.6%Pt-40%TiO2/CeO2-MnO2复合催化剂的活性较高,光热催化10 h时,苯降解率可达94.5%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.