Carbon-Coated SiO2 Composites as Promising Anode Material for Li-Ion Batteries

Porous silica-based materials are a promising alternative to graphite anodes for Li-ion batteries due to their high theoretical capacity, low discharge potential similar to pure silicon, superior cycling stability compared to silicon, abundance, and environmental friendliness. However, several challenges prevent the practical application of silica anodes, such as low coulombic efficiency and irreversible capacity losses during cycling. The main strategy to tackle the challenges of silica as an anode material has been developed to prepare carbon-coated SiO₂ composites by carbonization in argon atmosphere. A facile and eco-friendly method of preparing carbon-coated SiO₂ composites using sucrose is reported herein. The carbon-coated SiO₂ composites were characterized using X-ray diffraction, X-ray photoelectron spectroscopy, thermogravimetry, transmission and scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy, cyclic voltammetry, and charge–discharge cycling. A C/SiO₂-0.085 M calendered electrode displays the best cycling stability, capacity of 714.3 mAh·g⁻¹, and coulombic efficiency as well as the lowest charge transfer resistance over 200 cycles without electrode degradation. The electrochemical performance improvement could be attributed to the positive effect of the carbon thin layer that can effectively diminish interfacial impedance.     

Engineering the Distribution of Carbon in Silicon Oxide Nanospheres at the Atomic Level for Highly Stable Anodes

The application of high‐performance silicon‐based anodes, which are among the most prominent anode materials, is hampered by their poor conductivity and large volume expansion. Coupling of silicon‐based anodes with carbonaceous materials is a promising approach to address these issues. However, the distribution of carbon in reported hybrids is normally inhomogeneous and above the nanoscale, which leads to decay of coulombic efficiency during deep galvanostatic cycling. Herein, we report a porous silicon‐based nanocomposite anode derived from phenylene‐bridged mesoporous organosilicas (PBMOs) through a facile sol–gel method and subsequent pyrolysis. PBMOs show molecularly organic–inorganic hybrid character, and the resulting hybrid anode can inherit this unique structure, with carbon distributed homogeneously in the Si‐O‐Si framework at the atomic scale. This uniformly dispersed carbon network divides the silicon oxide matrix into numerous sub‐nanodomains with outstanding structural integrity and cycling stability.     

轻质三维多孔泡沫铝用作高性能锂金属负极骨架

将轻质、三维多孔且亲锂的泡沫铝用作锂(Li)金属负极骨架,通过简单的机械挤压方法,将泡沫铝与金属Li复合,制得Al@Li复合负极。泡沫铝自身的高亲锂性,能够为Li金属成核提供丰富且均匀的活性位点,诱导Li在泡沫铝内部的快速成核和均匀电沉积。同时,泡沫铝的三维多孔结构,可以容纳Li金属负极在充放电过程中的巨大体积应变,降低局部电流密度,从而有效抑制Li枝晶的生长。因此,与纯Li金属负极相比,所获得的Al@Li复合负极在对称电池和LiFePO₄||Al@Li半电池中,均表现出了更加优异的循环稳定性。     

轻质三维多孔泡沫铝用作高性能锂金属负极骨架

将轻质、三维多孔且亲锂的泡沫铝用作锂(Li)金属负极骨架,通过简单的机械挤压方法,将泡沫铝与金属 Li复合,制得Al@Li复合负极。泡沫铝自身的高亲锂性,能够为Li金属成核提供丰富且均匀的活性位点,诱导Li在泡沫铝内部的快速成核和均匀电沉积。同时,泡沫铝的三维多孔结构,可以容纳Li金属负极在充放电过程中的巨大体积应变,降低局部电流密度,从而有效抑制Li枝晶的生长。因此,与纯Li金属负极相比,所获得的Al@Li复合负极在对称电池和LiFePO₄||Al@Li半电池中,均表现出了更加优异的循环稳定性。     

Scalable synthesis of macroscopic porous carbon sheet anode for potassium-ion capacitor

Carbon materials hold the great promise for application in energy storage devices owing to their low cost, high thermal/chemical stability, and high electrical conductivity. However, it remains challenging to synthesize high-performance carbon electrodes in a simple, scalable and sustainable way. Here, we report a facile method for scalable synthesis of porous carbon anode by using cheap and easily accessible zeolitic imidazolate framework-8 as a template and polyvinylpyrrolidone as an additiona...     

Freestanding film formed with Sb-nanoplates embedded in flexible porous carbon nanofibers as a binder-free anode for high-performance wearable potassium-ion battery

Antimony-based materials are considered as promising anodes for potassium ion batteries due to their high theoretical capacity and low electrode potential. However, the aggregation and bulk expansion of Sb particles in cycling will cause capacity attenuation and poor rate performance. In this paper, Sb nanoplates were designed to be embedded in flexible porous N-dopped carbon nanofibers (Sb@PCNFs) by a simple electrospinning deposition (ESD) method. In this structural design, Sb nanoplates of high capacity were employed as active materials, N-dopped carbon nanofibers were used to improve conductivity and structural stability. The introduction of pore-forming agent enables the nanofibers to possess porous structure, thus buffering the huge volume change and promoting the transfer of electrolyte/ions. More importantly, the freestanding film can be directly used as a working electrode, reducing the redundancy in the battery and the cost. Benefitting from the favorable structure, the freestanding flexible Sb@PCNFs electrode shows excellent potassium storage performance with a capacity of 314 mAh/g after 2000 cycles at 500 mA/g. This strategy of employing active material with high capacity in porous and conductive flexible nanofibers represents an effective method of achieving binder-free electrode with good electrochemical performance towards wearable energy storage devices.     

Co3O4 Hollow Nanoparticles Embedded in Mesoporous Walls of Carbon Nanoboxes for Efficient Lithium Storage

Confining nanostructured electrode materials in porous carbon represents an effective strategy for improving the electrochemical performance of lithium-ion batteries. Herein, we report the design and synthesis of hybrid hollow nanostructures composed of highly dispersed Co₃O₄ hollow nanoparticles (sub-20 nm) embedded in the mesoporous walls of carbon nanoboxes (denoted as H-Co₃O₄@MCNBs) as an anode material for lithium-ion batteries. The facile metal–organic framework (MOF)-engaged strategy for the synthesis of H-Co₃O₄@MCNBs involves chemical etching-coordination and subsequent two-step annealing treatments. Owing to the unique structural merits including more active interfacial sites, effectively alleviated volume variation, good and stable electrical contact, and easy access of Li⁺ ions, the H-Co₃O₄@MCNBs exhibit excellent lithium-storage performance in terms of high specific capacity, excellent rate capability, and cycling stability.     

Si/C nanocomposite anode materials by freeze-drying with enhanced electrochemical performance in lithium-ion batteries

The nanostructured Si/graphite composites embedded with the pyrolyzed polyethylene glycol was synthesized from coarse silicon and natural graphite by a facile and cost-effective approach. The Si/C nanocomposite showed the fluffy carbon-coated structure, which was confirmed by the SEM and TEM measurements. The as-obtained Si/C nanocomposite, employed as anode material in lithium-ion batteries, exhibited significantly enhanced rate capability and cycling stability. The improved electrochemical stability of the composite was evaluated by EIS and galvanostatically charge/discharge test. A reversible capacities as high as 85% and 91% of the initial charge capacities, could be maintained for the Si/C nanocomposite electrode after 40 cycles under the high current densities of 500 and 1,000?mA?g^?1, respectively. The relatively low cost and excellent electrochemical capability of the Si/C nanocomposite would well meet the challenge in rapid charge and discharge for large-size lithium-ion rechargeable batteries.     

Rational design of self-sacrificial template derived quasi-Cu-MOF composite as anodes for high-performance lithium-ion batteries

MOF-based composites have aroused widespread concern due to their controllable morphology and pore characteristics. Nevertheless, the poor conductivity and volume expansion hinder its practical application in LIBs. Herein a classical structure HKUST-1, as the precursor, was used to fabricate quasi-Cu-MOF composite through a facile thermal decomposition strategy. The results showed that quasi-Cu-MOF composite had superior reversible specific capacity (627.5 mAh/g at 100 mA/g) and outstanding cycle stability (514.6 mAh/g at 500 mA/g after 400 cycles) as anodes for LIBs. The results demonstrated that the low-temperature calcination strategy played a significant role in morphology retaining during cycling and the derived copper framework play a crucial part in conductivity improvement. This work is helpful to the design of high-performance electrodes with advanced three-dimensional hierarchical structures.     

Activated carbon felts with exfoliated graphene nanosheets for flexible all-solid-state supercapacitors

Porous activated carbon felts (ACFs) with exfoliated graphene nanosheets were prepared by a simple thermal treatment strategy. They exhibit high gravimetric and areal specific capacitances as well as long-term cycling stability. Impressively, the all-solid-state supercapacitors based on ACFs electrodes deliver stable electrochemical performance even under different bending states.     

Si-O-C骨架支撑型高循环性能锂离子电池硅基负极材料

通过经济有效的方法制备得到一种具有长循环寿命的高效稳定性硅/硅氧碳/无定形碳的复合负极材料结构. 在这种结构中,以具有稳定化学性能的硅氧碳结构作为骨架,来支撑和隔离硅纳米颗粒结构. 材料中包含的无定形碳组分可提高硅/硅氧碳结构的电导性能. 这种复合负极结构在0.3C电流充放电情况下,不仅能发挥出637.3 mAh·g^-1的比容量,而且在经过100 周的充放电循环后,其容量保持率也达到86%. 这种新型硅基负极材料的设计为其他功能材料的设计提供了一种潜在可能的方法.     

Two-Dimensional Germanium Sulfide Nanosheets as an Ultra-Stable and High Capacity Anode for Lithium Ion Batteries

Lithium ion batteries (LIBs) at present still suffer from low rate capability and poor cycle life during fast ion insertion/extraction processes. Searching for high-capacity and stable anode materials is still an ongoing challenge. Herein, a facile strategy for the synthesis of ultrathin GeS₂ nanosheets with the thickness of 1.1 nm is reported. When used as anodes for LIBs, the two-dimensional (2D) structure can effectively increase the electrode/electrolyte interface area, facilitate the ion transport, and buffer the volume expansion. Benefiting from these merits, the as-synthesized GeS₂ nanosheets deliver high specific capacity (1335 mAh g⁻¹ at 0.15 A g⁻¹), extraordinary rate performance (337 mAh g⁻¹ at 15 A g⁻¹) and stable cycling performance (974 mAh g⁻¹ after 200 cycles at 0.5 A g⁻¹). Importantly, our fabricated Li-ion full cells manifest an impressive specific capacity of 577 mAh g⁻¹ after 50 cycles at 0.1 A g⁻¹ and a high energy density of 361 Wh kg⁻¹ at a power density of 346 W kg⁻¹. Furthermore, the electrochemical reaction mechanism is investigated by the means of ex-situ high-resolution transmission electron microscopy. These results suggest that GeS₂ can use to be an alternative anode material and encourage more efforts to develop other high-performance LIBs anodes.     

Multilayer Porous Vanadium Nitride Microsheets Anodes for Highly Stable Na-ion Batteries

Sodiumion batteries(SIBs)have attracted intensive attention as promising alternative to lithium-ionbatteries(LIBs)for large scale energy storage systems because of low cost of sodium,similar energy storage mechanism and the reasonable performance.However,it is still a great challenge to search and design a robust structure of anode materials with excellent cycling stability and high rate capability for SIBs.Herein,multilayer porous vanadium nitride(VN)microsheets are synthesized through a facile and scalable hydrothermal synthesis-nitrogenization strategy as an effective anode material for SIBs.The multilayer porous VN microsheets not only offer more active sites for fast Na+insertion/extraction process and short diffusion pathway,but also effectively buffer the volume change of anode due to more space in the multilayer porous structure.The large proportions of capacitive behavior imply that the Na+charge storage depends on the intercalation pseudocapacitive mechanism.The multilayer porous VN microsheets electrodes manifest excellent cycling stability and rate capability,delivering a discharge capacity of 156.1 mA·h/g at 200 mA/g after 100 cycles,and a discharge capacity of 111.9 mA·h/g at 1.0 A/g even after 2300 cycles with the Coulombic efficiency of nearly 100%.     

Building Organic/Inorganic Hybrid Interphases for Fast Interfacial Transport in Rechargeable Metal Batteries

We report a facile in situ synthesis that utilizes readily accessible SiCl₄ cross‐linking chemistry to create durable hybrid solid–electrolyte interphases (SEIs) on metal anodes. Such hybrid SEIs composed of Si‐interlinked OOCOR molecules that host LiCl salt exhibit fast charge‐transfer kinetics and as much as five‐times higher exchange current densities, in comparison to their spontaneously formed analogues. Electrochemical analysis and direct optical visualization of Li and Na deposition in symmetric Li/Li and Na/Na cells show that the hybrid SEI provides excellent morphological control at high current densities (3–5 mA cm^?2) for Li and even for notoriously unstable Na metal anodes. The fast interfacial transport attributes of the SEI are also found to be beneficial for Li‐S cells and stable electrochemical cycling was achieved in galvanostatic studies at rates as high as 2 C. Our work therefore provides a promising approach towards rational design of multifunctional, elastic SEIs that overcome the most serious limitations of spontaneously formed interphases on high‐capacity metal anodes.     

Graphene anchored with mesoporous NiO nanoplates as anode material for lithium-ion batteries

Graphene is an excellent substrate to load nanomaterials for energy applications due to its large surface area, excellent conductivity, mechanical strength, and chemical stability. In this study, thermal exfoliated functionalized graphene sheets with good conductivity and high BET surface area are anchored with mesoporous NiO nanoplates by in situ chemical synthesis approach. Electrochemical characterization shows that functionalized graphene sheets–NiO sample exhibits a high capacity of about 700 mAh/g at a discharge current density of 100 mA/g and a good cycling ability. The high capacity and good cycling ability of functionalized graphene sheets –NiO material were attributed to the intimate interaction between the graphene sheets and NiO nanoplates. The graphene sheets not only enhance the conductivity of NiO nanoplates but also improve the structure stability of NiO nanoplates. Furthermore, the mesoporous structure of NiO nanoplates is available to the transfer of electrolyte. Such functionalized graphene sheets–NiO nanocomposite could be a promising candidate material for a high-capacity, low cost, and nontoxic anode for lithium-ion batteries.     

Scalable Synthesis of Interconnected Porous Silicon/Carbon Composites by the Rochow Reaction as High‐Performance Anodes of Lithium Ion Batteries

Despite the promising application of porous Si‐based anodes in future Li ion batteries, the large‐scale synthesis of these materials is still a great challenge. A scalable synthesis of porous Si materials is presented by the Rochow reaction, which is commonly used to produce organosilane monomers for synthesizing organosilane products in chemical industry. Commercial Si microparticles reacted with gas CH₃Cl over various Cu‐based catalyst particles to substantially create macropores within the unreacted Si accompanying with carbon deposition to generate porous Si/C composites. Taking advantage of the interconnected porous structure and conductive carbon‐coated layer after simple post treatment, these composites as anodes exhibit high reversible capacity and long cycle life. It is expected that by integrating the organosilane synthesis process and controlling reaction conditions, the manufacture of porous Si‐based anodes on an industrial scale is highly possible.     

Tin oxide–based anodes for both lithium-ion and sodium-ion batteries

Tin oxide, SnO₂, is a suitable anode for both lithium-ion and sodium-ion batteries (LIBs and SIBs) unlike graphite and silicon, which are only suitable anodes for LIB. SnO₂ has garnered much attention because of its high theoretical capacities (LIB = 1494 mA h g^?1 and SIB = 1378 mA h g^?1). However, the commercialization of SnO₂ anodes is still hugely challenged because these anodes suffer from large volume expansion caused by lithiation/delithiation or sodiation/desodiation during cycling, leading to severe capacity fading. The adopted strategies to solve these problems are nanosizing that greatly improves the structural stability of the material and helps to have fast reaction kinetics. Synthesizing nanocomposite of SnO₂ nanoparticles with nanoporous carbonaceous materials to buffer the volume expansion, enhance cycling stability; create oxygen deficiency to improve intrinsic conductivity. In this review, the recent research trends on SnO₂ as anode for both LIB and SIB systems are presented.     

Bio-inspired and Eco-friendly Synthesis of 3D Spongy Meso-Microporous Carbons from CO2 for Supercapacitors

Inspired by the spongy bone structures, three-dimensional (3D) sponge-like carbons with meso-microporous structures are synthesized through one-step electro-reduction of CO₂ in molten carbonate Li₂CO₃−Na₂CO₃−K₂CO₃ at 580 °C. SPC4-0.5 (spongy porous carbon obtained by electrolysis of CO₂ at 4 A for 0.5 h) is synthesized with the current efficiency of 96.9 %. SPC4-0.5 possesses large electrolyte ion accessible surface area, excellent wettability and electronical conductivity, ensuring the fast and effective mass and charge transfer, which make it an advcanced supercapacitor electrode material. SPC4-0.5 exhibits a specific capacitance as high as 373.7 F g⁻¹ at 0.5 A g⁻¹, excellent cycling stability (retaining 95.9 % of the initial capacitance after 10000 cycles at 10 A g⁻¹), as well as high energy density. The applications of SPC4-0.5 in quasi-solid-state symmetric supercapacitor and all-solid-state flexible devices for energy storage and wearable piezoelectric sensor are investigated. Both devices show considerable capacitive performances. This work not only presents a controllable and facile synthetic route for the porous carbons but also provides a promising way for effective carbon reduction and green energy production.     

Designing N-doped graphene/ReSe_2/Ti_3C_2 MXene heterostructure frameworks as promising anodes for high-rate potassium-ion batteries

Developing high-performance anodes for potassium ion batteries(KIBs) is of paramount significance but remains challenging.In the normal sense,electrode materials are prepared by ubiquitous wet chemical routes,which otherwise might not be versatile enough to create desired heterostructures and/or form clean interfacial areas for fast transport of K-ions and electrons.Along this line,rate capability/cycling stability of resulting KIBs are greatly handicapped.Herein we present an all-chemical vapor deposition approach to harness the direct synthesis of nitrogen-doped graphene(NG)/rhenium diselenide(ReSe_2)hybrids over three-dimensional MXene supports as superior heterostructure anode material for KIBs.In such an innovative design,1 T'-ReSe2 nanoparticles are sandwiched in between the NG coatings and MXene frameworks via strong interfacial interactions,thereby affording facile K~+ diffusion,enhancing overall conductivity,boosting high-power performance and reinforcing structural stability of electrodes.Thus-constructed anode delivers an excellent rate performance of 138 mAh g^-1 at 10.0 A g^-1 and a high reversible capacity of 90 mAh g^-1 at 5 A g^-1 after 300 cycles.Furthermore,the potassium storage mechanism has been systematically probed by advanced in situlex situ characterization techniques in combination with first principles computations.     

二次包覆法制备煤沥青基硅/碳复合物及其锂离子电池性能

本文采用市售纳米硅为硅源,以软化点低、得碳率高、价格便宜的煤沥青作为碳源,通过两步包覆法制备了煤沥青基硅/碳(Si/C/C)复合物,并研究其作为锂离子电池负极材料的电化学性能。 结果表明,所得复合物的粒径在300~350 nm间,Si纳米粒子被C包覆并相互连结成C-Si-C网络结构,其中Si含量为27%的硅/碳复合物(Si/C/C-27%)作为锂电池电极材料表现了良好的储锂性能。 在0.1 A/g的小电流密度下,Si/C/C-27%的放电比容量为1281 mA·h/g;在3 A/g的大电流密度下,其放电比容量仍能保持在582 mA·h/g,表现了良好的倍率性能。Si/C/C-27%在2 A/g的电流密度下经过100次的循环后其比容量保持率为76.61%,表现了良好的循环稳定性。 相比于煤沥青基碳的一次包覆所得的硅/碳复合材料(Si/C),Si/C/C有效提高了Si纳米粒子的导电性并抑制了其在嵌锂和脱锂过程中的体积膨胀。 本文提出的二次包覆的新方法为制备具有优异电化学性能的锂离子电池负极材料提供了新的研究思路。