Simultaneous determination of five commercial cationic dyes in stream waters using diatomite solid-phase extractant and multivariate calibration

A simple spectrophotometric method was developed for the simultaneous determination of five commercial cationic dyes at 2.0?8.5 μg L^?1 level after using diatomite as solid-phase extractant. The method is based on preconcentration of the five dyes on natural diatomite solid-phase extractant and on multivariate calibration using partial least squares method (PLS-1). Compared with commonly used chromatographic or electrophoretic methods the developed method is simple and sensitive. With enrichment factors between 89 and 96, diatomite outperformed zeolite and activated carbon for dyes preconcentration. Before preconcentration and using PLS-1 method, the cationic dyes were simultaneously analyzed with linear ranges of 0.18–4.5, 0.32–5.0, 0.23–4.5, 0.45–8.0 and 0.82–12.0 mg L^?1 for crystal violet, malachite green, methylene blue, safranine O, and thioflavin T, respectively. The detection limits of dyes were estimated using Lorber’s method and found to be within the range 43–245 μg L^?1. The proposed SPE/PLS-1 method was applied to spiked stream water samples with good accuracy (79–91%) and precision (RSD 1.8–7.3%) but with slightly lower enrichment factors (80–92).     

Combining ultrasound‐assisted extraction and vortex‐assisted liquid–liquid microextraction for the sensitive assessment of aflatoxins in aquaculture fish species

Although aflatoxins contamination in feedstuff is a well‐known problem, and hence these residues are controlled in poultry products, there is scarce information regarding the presence of these toxic substances in aquaculture fish, facilities that use several feedstuff for fish breeding. A simple, rapid, and sensitive method has been therefore developed for aflatoxins (B1, B2, G1, and G2) assessment in aquaculture products by combining ultrasound probe‐assisted extraction and vortex‐assisted liquid–liquid microextraction as a sample pretreatment, and high‐performance liquid chromatography‐tandem mass spectrometry as a separation/detection system. Aflatoxins were extracted from fish flesh/liver with a 60:40 acetonitrile/aqueous phosphate buffer (pH 7.0) mixture before preconcentration and clean‐up by vortex‐assisted liquid–liquid microextraction under the following optimized conditions: 5.0 mL of fish extract at pH 7.0 and NaCl at 0.5% (w/v), 400 μL of chloroform as extracting solvent, and vortex shaking at 2000 rpm for 1 min. The proposed method is shown to be precise and accurate, and the limit of quantitations (from 0.20 to 1.10 μg kg^?1) were lower than the value established by the European Commission Regulation for aflatoxins in foodstuff. Results have shown that fish flesh is free of aflatoxins, but aflatoxins B2 and G1 were quantified in fish liver.     

Removal of anionic and cationic dyes from wastewater by adsorption using multiwall carbon nanotubes

This paper evaluated the efficiency and reusability of multiwall carbon nanotubes (MWNTs) on removal of cationic and anionic dyes under effect of pH, dose of MWNTs and concentration of dyes. The characterization of MWNTs is characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), Raman spectra and BET (Brunauer, Emmett and Teller) surface area. SEM and TEM analyses showed that MWNTs had size within nano scale range of 10–50 nm. The experimental results indicated that the efficiency of removal of MWNTs increase under condition of normal pH, at contact time 60 min with agitation speed 240 rpm and initial concentration of dyes 10 mg/l. Under these optimal conditions, the removal reached 98.7% and 97.2% for anionic dyes and cationic dyes, respectively. For economic use, MWNTs can be used more than one time where the same experiments with the already used MWNTs was repeated and it was found that the percent removal is almost the same.     

Polypyrrole‐magnetite dispersive micro‐solid‐phase extraction combined with ultraviolet‐visible spectrophotometry for the determination of rhodamine 6G and crystal violet in textile wastewater

Polypyrrole‐magnetite dispersive micro‐solid‐phase extraction method combined with ultraviolet‐visible spectrophotometry was developed for the determination of selected cationic dyes in textile wastewater. Polypyrrole‐magnetite was used as adsorbent due to its thermal stability, magnetic properties, and ability to adsorb Rhodamine 6G and crystal violet. Dispersive micro‐solid‐phase extraction parameters were optimized, including sample pH, adsorbent amount, extraction time, and desorption solvent. The optimum polypyrrole‐magnetite dispersive micro‐solid phase‐extraction conditions were sample pH 8, 60 mg polypyrrole‐magnetite adsorbent, 5 min of extraction time, and acetonitrile as the desorption solvent. Under the optimized conditions, the polypyrrole‐magnetite dispersive micro‐solid‐phase extraction with ultraviolet‐visible method showed good linearity in the range of 0.05–7 mg/L (R ² > 0.9980). The method also showed a good limit of detection for the dyes (0.05 mg/L) and good analyte recoveries (97.4–111.3%) with relative standard deviations < 10%. The method was successfully applied to the analysis of dyes in textile wastewater samples where the concentration found was 1.03 mg (RSD ±7.9%) and 1.13 mg/L (RSD ± 4.6%) for Rhodamine 6G and crystal violet, respectively. It can be concluded that this method can be adopted for the rapid extraction and determination of dyes at trace concentration levels.     

Directly‐coupled‐column ultra‐fast liquid chromatography with diode array detection method for the rapid quantification of allergenic disperse dyes in water preconcentrated by magnetic solid‐phase extraction

A directly‐coupled‐column ultra‐fast liquid chromatography coupled with diode array detection method for the determination of 12 allergenic disperse dyes in river water at sub‐ppb levels has been developed and successfully validated. The analytical method is based on the use of two different reversed‐phased columns connected through a two‐position switching valve. A baseline separation was achieved by proper selection of stationary phases, mobile phases, and the use of a gradient elution in both dimensions. Furthermore, an easy‐to‐handle magnetic solid‐phase extraction procedure was developed for the preconcentration of 12 allergenic disperse dyes from river water. An enrichment factor of 100 times was obtained. The results showed excellent performance in terms of trueness (76.8–99.0%), precision (intraday: 2.2–8.0%, interday: 3.3–8.2%), and sensitivity (limits of determination, 0.027–1.46 μg/L). Twenty real samples collected from the outfalls in the Yaojiang, Yongjiang and Fenghuajiang estuary were analyzed, and three of the studied compounds were found in one collected sample (12.6 μg/L for disperse blue 7, 11.6 μg/L for disperse blue 106, and 0.22 μg/L for disperse blue 3).     

Temperature-induced dispersive solid-phase extraction as a new approach for preconcentration of Sudan dyes in water and food samples prior to the determination by high-performance liquid chromatography

This study introduced a new microextraction method named temperature-induced dispersive solid-phase extraction. The performance of the method was demonstrated with the determination of Sudan dyes in food and natural water samples. In this method, a low quantity of sorbent was added to the aqueous solution and the mixture was shaken manually for about one minute. Then, the solution was heated in an ultrasonic water bath, and the sorbent was dissolved. Subsequently, the solution was cooled down with ice water, and consequently, the solubility of the sorbent was reduced in the sample solution and became cloudy. The phase separation was accelerated by centrifugation. The upper liquid phase was picked up using a syringe, and the remainder was solved in methanol and introduced into the HPLC for analysis. Various parameters affecting the extraction yield were evaluated. Analytical parameters, including limits of detection (0.011–0.016 μg/L) and quantification (0.038–0.055 μg/L), relative standard deviations (2.3%–3.1%), and preconcentration factor (40) proved the high efficiency of the developed method for the analysis of Sudan dyes. The proposed method was used to measure Sudan dyes in water and food samples and showed good extraction recoveries (95.0%–103.5%).     

Cationic Zr-based metal-organic framework via post-synthetic alkylation for selective adsorption and separation of anionic dyes

Adsorption and separation of toxic organic dyes are of great importance in wastewater treatment and dye recycling. In this work, cationic metal-organic framework MIL-140C–2NMe⁺ with triangular hydrophobic channels was prepared in which methyl groups were added to the pyridyl sites of the ligand [2,2'-bipyridine]-5,5'-dicarboxylic acid (H₂bpydc) via post-synthetic alkylation reaction. MIL-140C–2NMe⁺ can be used as an efficient adsorbent for the selective adsorption and separation of anionic dyes in the aqueous mixture of cationic/anionic dyes. Specifically, the adsorption capacities of MIL-140C–2NMe⁺ for anionic methyl orange can reach 310 mg/g in 10 min. With a facile doctor-blading process, we have also polymerized the MIL-140C–2NMe⁺ nanocrystals and polyvinylidene fluoride (PVDF) polymer to fabricate a flexible and self-supporting mixed matrix membrane (MMM), which can selectively capture and separate the anionic organic dyes from the binary dye mixtures.     

Determination of copper,lead, cadmium and zinc content in commercially valuable fish species from the Persian Gulf using derivative potentiometric stripping analysis

This study was performed to determine the concentrations of cadmium, lead, copper and zinc in the edible muscle of pelagic (Scomberomorus commerson, Chirocentrus dorab, Sphyraena jello, Rachycentron conadum, Thunus tonggol, and Tenualosa ilisha) and demersal (Nemipterus japonicas, Epinephelus coioides, Platycephalus indicus, Psettodes erumei, Pomadasys argenteus, and Acanthopagrus latus) fish species from the Persian Gulf during winter and summer. The samples were analyzed by the derivative potentiometric stripping technique; and the results were expressed as μg/g of wet weight. The obtained range of metals in fish species was 0.024–0.111 μg/g for cadmium, 0.057–0.471 μg/g for lead, 0.799–4.790 μg/g for copper and 3.226–11.390 μg/g for zinc. The study revealed that seasonal variation influenced the concentration of metals in the samples. The highest concentration of cadmium, lead, copper and zinc was found in Platycephalus indicus (0.147 μg/g), Acanthopagrus latus (0.534 μg/g), Psettodes erumei (5.294 μg/g) and Psettodes erumei (13.528 μg/g) in winter, respectively. Moreover, demersal fish species had higher cadmium, lead and zinc concentrations, but lower copper content than pelagic ones. Our study demonstrated that the estimated daily and weekly intakes of lead, copper and zinc, and estimated monthly intake of cadmium via consumption of fish flesh were below the PTDI, PTWI and PTMI values established by FAO/WHO.     

Dynamic supported liquid membrane tip extraction of glyphosate and aminomethylphosphonic acid followed by capillary electrophoresis with contactless conductivity detection

A dynamic supported liquid membrane tip extraction (SLMTE) procedure for the effective extraction and preconcentration of glyphosate (GLYP) and its metabolite aminomethylphosphonic acid (AMPA) in water has been investigated. The SLMTE procedure was performed in a semi-automated dynamic mode and demonstrated a greater performance against a static extraction. Several important extraction parameters such as donor phase pH, cationic carrier concentration, type of membrane solvent, type of acceptor stripping phase, agitation and extraction time were comprehensively optimized. A solution of Aliquat-336, a cationic carrier, in dihexyl ether was selected as the supported liquid incorporated into the membrane phase. Quantification of GLYP and AMPA was carried out using capillary electrophoresis with contactless conductivity detection. An electrolyte solution consisting of 12 mM histidine (His), 8 mM 2-(N-morpholino)ethanesulfonic acid (MES), 75 μM cetyltrimethylammonium bromide (CTAB), 3% methanol, pH 6.3, was used as running buffer. Under the optimum extraction conditions, the method showed good linearity in the range of 0.01–200 μg/L (GLYP) and 0.1–400 μg/L (AMPA), acceptable reproducibility (RSD 5–7%, n = 5), low limits of detection of 0.005 μg/L for GLYP and 0.06 μg/L for AMPA, and satisfactory relative recoveries (90–94%). Due to the low cost, the SLMTE device was disposed after each run which additionally eliminated the possibility of carry-over between runs. The validated method was tested for the analysis of both analytes in spiked tap water and river water with good success.     

Removal of cationic dyes by poly(acrylamide-co-acrylic acid) hydrogels in aqueous solutions

Poly(acrylamide-co-acrylic acid (poly(AAm-co-AAc)) hydrogels prepared by irradiating with γ-radiation were used in experiments on swelling, diffusion, and uptake of some cationic dyes such as Safranine-O (SO) and Magenta (M). Poly(AAm-co-AAc) hydrogels irradiated at 8.0 kGy have been used for swelling and diffusion studies in water and cationic dye solutions. The maximum swellings in water, and SO, and M solutions observed are 2700%, 3500%, and 4000%, respectively. Diffusions of water and cationic dyes within hydrogels have been found to be non-Fickian in character. Adsorption of the cationic dyes onto poly(AAm-co-AAc) hydrogels is studied by the batch adsorption technique. The adsorption type was found Langmuir type in the Giles classification system. The moles of adsorbed dye for SO and M per repeating unit in hydrogel (binding ratio, r) have been calculated as 3834×10⁻⁶ and 1323×10⁻⁶, respectively. These results show that poly(AAm-co-AAc) hydrogels can be used as adsorbent for water pollutants such as cationic dyes.     

A spectral approach to determine location and orientation of azo dyes within surfactant aggregates

The UV–vis absorption properties of azo dyes are known to exhibit a variation with the polarity and acidity of the dye environment. The spectral properties of a series of anionic azo dyes were characterized to further probe the interaction of these dyes with two types of surfactant aggregates: (1) the spherical micelles formed in aqueous solution by alkyltrimethylammonium bromide (C_nTAB) surfactants with n = 10–16 and (2) the unilamellar vesicles spontaneously formed in water from binary mixtures of the oppositely-charged double-tailed surfactants cationic didodecyldimethylammonium bromide (DDAB) and anionic sodium dioctylsulfosuccinate (Aerosol OT or AOT). The observed dye spectra reflect the solvatochromic behavior of the dyes and suggest the location and orientation of the dye within the surfactant aggregates. Deconvolution of the overall spectra into sums of Gaussian curves more readily displays any contributions of tautomeric forms of the azo dyes resulting from intramolecular hydrogen bonding. The rich variation in UV/vis absorption properties of these anionic azo dyes supports their use as sensitive tools to explore the nanostructures of surfactant aggregates.     

A cloud point extraction approach using Triton X-100 for the separation and preconcentration of Sudan dyes in chilli powder

A CPE-HPLC (UV) method was developed for the determination of Sudan (I-IV) dyes, non-ionic surfactant Triton X-100 was used to extract and preconcentrate Sudan dyes from chilli powder prior to their determination by HPLC-UV. The separation and determination of Sudan dyes was then carried out in the HPLC-UV system with isocratic elution, and the detector was set at 500 nm. The parameters and variables that affect the extraction were investigated. Under optimum conditions: 3% of Triton X-100 (W/V), 10% of Na₂CO₃ (W/V), heat-assisted at 70 °C for 30 min. Recoveries of the Sudan dyes ranged from 80.70% to 85.45% in chilli powder by CPE method, with all the relative standard deviations of less than 3%. Limit of detection (LOD) and limit of quantification (LOQ) were in the range of 2.0-4.0 and 7.0-12.0 μg kg⁻¹ in chilli powder, respectively.     

Ion‐pair switchable‐hydrophilicity solvent‐based homogeneous liquid–liquid microextraction for the determination of paraquat in environmental and biological samples before high‐performance liquid chromatography

An approach involving ion‐pair switchable‐hydrophilicity solvent‐based homogeneous liquid–liquid microextraction coupled to high‐performance liquid chromatography has been applied for the preconcentration and separation of paraquat in a real sample. A mixture of triethylamine and water was used as the switchable‐hydrophilicity solvent. The pH was regulated using carbon dioxide; hence the ratio of the ionized and non‐ionized form of triethylamine could control the optimum conditions. Sodium dodecyl sulfate was utilized as an ion‐pairing agent. The ion‐associate complex formed between the cationic paraquat and sodium dodecyl sulfate was extracted into triethylamine. The separation of the two phases was carried out by the addition of sodium hydroxide, which changed the ionization state of triethylamine. The effects of some important parameters on the extraction recovery were investigated. Under the optimum conditions (500 μL of the extraction solvent, 1 mg sodium dodecyl sulfate, 2.0 mL of 10 mol/L sodium hydroxide, and pH 4), the limit of detection and the limit of quantification were 0.2 and 0.5 μg/L, respectively, with preconcentration factor of 74. The precision (RSD, n  = 10) was  <5%. The recovery of the analyte in environmental and biological samples was in the range of 90.0–92.3%.     

Development of a capillary electrophoretic method for determination of ketorolac enantiomers in human plasma using cationic β-cyclodextrin derivative as a chiral selector

A novel approach for the separation of ketorolac enantiomers by capillary electrophoresis is presented. A cationic β-cyclodextrin derivative based on imidazole was synthesized and used as a chiral selector in the background electrolyte. The influence of pH and ionic strength of background electrolyte, as well as cationic β-cyclodextrin derivative concentration on the resolution of ketorolac enantiomers, was investigated. The highest value of the resolution for ketorolac enantiomers was 1.46 when the background electrolyte consisted of 25 mM NaH₂PO₄ (pH 6.4) with 1 mM 1-butyl-3-β-cyclodextrinimidazolium tosylate. Additionally, the possibilities of cationic derivatives for the separation of ketoprofen enantiomers were shown (peak resolution 1.06). The two-step preconcentration mode was developed to reduce the limit of detection of individual enantiomers. The proposed approach was successfully applied to determine ketorolac enantiomers in tablet “Ketorol express” and human plasma. The calibration range of ketorolac enantiomers for plasma samples was 0.25–2.50 μg/ml with coefficients of determination ≥ 0.99. The relative standard deviation both of the peak area and migration time was less than 15%, as well as the accuracy ranged from 90.1% to 110.2% for both analytes. The limits of detection were 44 and 55 ng/ml for R- and S-ketorolac. The quantity of ketorolac in plasma was verified with high-performance liquid chromatography.     

Photo-catalytic degradation of different toxic dyes using silver nanoparticles as photo-catalyst,mediated via Citrus aurantium peels extract

Green synthesis of silver nanoparticles was accomplished using peels (rind) extract of Citrus aurantium as a reducing as well as capping agent. Biosynthesized AgNPs (silver nanoparticle) has been characterized via UV–Visible spectroscopy, XRD, SEM, EDAX, TEM and TGA. The observed UV–Vis analysis resulted in the formation of characteristic surface plasmon resonance absorption band centered at 465 ​nm. The observed XRD patterns, having hkl values (111), (200), (220) and (222), confirms the cubic crystalline structure of AgNPs. The average grain size 9.5 ​μm was observed by the SEM technique. Bio synthesized AgNPs were efficiently degrading the methylene blue dye nearly 95.35% in 98 ​h of exposure time. It also degraded acridine orange dye 87.34% and rose bengal dye 90.09% followed by 4h of continuous UV absorption. It also degrades methyl orange dye nearly 51% in 10h of solar irradiation. Synthesized AgNPs can be used as photo-catalyst for degrading toxic dyes.     

Development and Validation of a Modified QuEChERS Method for the Analysis of Bisphenols in Meats by UPLC-MS/MS

A reliable and affordable QuEChERS (quick, easy, cheap, effective, rugged, and safe) methodology in combination with ultra-high performance liquid chromatography-tandem mass spectrometry (UPLC–MS/MS) was successfully developed and validated for the determination of eight bisphenols (BPs) residues containing in meats (chicken, duck, beef, pork, fish, shrimp, and mutton). A novel QuEChERS method optimization was carried out in terms of process efficiency (PE), matrix effect (ME), and extraction recovery (RE). After a simple vortex extraction of the samples with acetonitrile, 1 g sodium acetate was used for salting out (NaAC), and 100 mg primary secondary amine (PSA) purifying reagents were used for purification. The properties of the sorbents were assessed by the obtained parameters, such as matrix effect (ME), linearity, sensitivity, accuracy, and precision. Under the optimal conditions, BPs were well separated on an ACQUITY UPLC BEH ® C₁₈ column in 8 min by gradient elution, and exhibited a good linear relationship (R²?>?0.9988) in the linear range. Moreover, the limits of detection (LODs) and the limits of quantification (LOQs) were located in the range of 0.01– 0.11 μg/kg and 0.03 – 0.37 μg/kg, respectively. The developed method was satisfactory in terms of accuracy (relative recoveries: 76.1% – 113.7%) and precision (relative standard deviations below 10.3%). Finally, the developed method was successfully employed to identify and quantify BPs residues in 28 real meat samples. The proposed QuEChERS-UPLC–MS/MS method is simple, high efficiency, cost-effective, practical, and susceptible to being implemented in routine laboratories to quickly detect the BPs in meats (chicken, duck, beef, pork, fish, shrimp, and mutton). In this sense, the method is useful for obtaining BPs residue data to evaluate the contamination status of BPs in meat food and provide scientific support for scientific supervision.

     

Combining metal-microbe and microbe-microbe dual direct electron transfer on Fe(0)-cathode of bio-electrochemical system to enhance anaerobic digestion of cellulose wastewater

Considering that cathode of microbial electrochemical system (MES) is a good electrons source for methane production via direct/indirect electron transfer to electroactive microorganisms, and that Fe(0) is also a confirmed electron donor for some electroactive microorganisms through metal-microbe direct electron transfer (DET), Fe(0)-cathode was equipped into an MES digester to enhance cathodic methane production. The results of this study indicated that the potential DET participator, Clostridium possibly obtained electrons directly from Fe(0)-cathode via metal-microbe electrons transfer, then transferred electrons directly to the definite DET participators, Methanosarcina/Methanothrix via microbe-microbe electrons transfer for CH₄ production. In addition, Methanobacterium is another specially enriched methanogen on Fe(0)-cathode, which might obtain electrons directly from Fe(0)-cathode to produce CH₄ via metal/electrode-microbe DET. The increment of conductivity of cathodic sludge in Fe(0)-cathode MES digester (R1) further confirmed the enrichment of electroactive microorganisms participating in DET process. As a consequence, a higher CH₄ production (1205–1508 mL/d) and chemical oxygen demand (COD) removal (79.0%-93.8%) were achieved in R1 compared with graphite-cathode MES digester (R2, 720–1090 mL/d and 63.6%-85.6%) and the conventional anaerobic digester (R3, 384–428 mL/d and 35.2%-41.0%). In addition, energy efficiency calculated indicated that the output energy of CH₄ production was 8.16 folds of electricity input in Fe(0)-cathode MES digester.     

Microcontact printed diaphorase monolayer on glass characterized by atomic force microscopy and scanning electrochemical microscopy

Micropatterns of diaphorase (Dp) were fabricated on glass substrates by the microcontact printing (μCP) method and characterized with atomic force microscopy (AFM) and scanning electrochemical microscopy (SECM). AFM images of the printed samples revealed that the mean height of the Dp patterns was 3–5 nm, indicating the formation of a monolayer pattern. The Dp molecules on the surface organized themselves into two-dimensional arrays. We used two kinds of inking solutions: Dp–phosphate buffer solution (PBS) (pH 7.0) and Dp–PBS (pH 7.0) with glutaraldehyde (GA, 1% v/v) as a cross-linking reagent. Although the AFM imaging showed high-quality Dp monolayer patterns in both cases, SECM measurements indicated that the enzymatic activity of Dp was almost lost when Dp–PBS with GA was used as the inking solution, whereas clear enzymatic activity was found when Dp–PBS was used.     

Microextraction,capillary electrophoresis,and mass spectrometry for forensic analysis of azo and methine basic dyes from acrylic fibers

Designed experiments based on a simplex mixture design were employed to explore the effects of three solvent components (water, formic acid, and aqueous acetic acid), extraction time, and extraction temperature for the automated microextraction of basic (cationic) dyes from acrylic fibers. Extractions were conducted by an automated liquid handling system, and dye extraction was evaluated using a UV/visible microplate reader. Highest extraction efficiency for two subclasses of basic dyes (methine and azo) from acrylic fibers was achieved with an extraction solvent containing 88% formic acid/12% water. Cationic dyes were analyzed by capillary electrophoresis using a 45 mM ammonium acetate buffer in acetonitrile–water at pH 4.7. The utility of microextraction combined with capillary electrophoresis–mass spectrometry for analysis of extracts from trace fibers was demonstrated by the detection and characterization of three basic dyes extracted from a 2-mm length of single acrylic fiber.     

Determination of oleandrin and adynerin in rat plasma by UPLC–MS/MS and their pharmacokinetic study

Oleandrin and adynerin are the main toxic components of oleander, an evergreen shrub or a small tree of the oleander family, which belongs to the class of cardiac glycosides exhibiting delayed action. The pharmacokinetic differences of oleandrin and adynerin in rats were studied by ultra-performance liquid chromatography–tandem mass spectrometry (UPLC–MS/MS) under two different administration modes: oral (5 mg/kg) and sublingual intravenous injection (1 mg/kg). The chromatographic column was UPLC BEH C18 (50 mm × 2.1 mm, 1.7 μm), and the column temperature was set at 40 °C. The mobile phase was acetonitrile–water (containing 0.1 % formic acid), with gradient elution, the flow rate was 0.4 mL/min, and the elution time was 4 min. Electrospray (ESI) positive ion mode detection with multiple reaction monitoring mode (MRM) was used for quantitative analysis: oleandrin m/z 577 → 145, adynerin m/z 534 → 113, and internal standard m/z 237 → 135. The established UPLC–MS/MS method was successfully applied to the pharmacokinetics in rats after administering oleandrin and adynerin. The bioavailability of oleandrin and adynerin was found to be low, 7.0 % and 93.1 %; respectively.