Synthesis,Properties, and n‐Type Transistor Characteristics of π‐Conjugated Compounds Having a Carbonyl‐Bridged Thiazole‐Fused Polycyclic System

A series of electron‐deficient π‐conjugated systems with 4,9‐dihydro‐s‐indaceno[2,1‐d:6,5‐d′]dithiazole‐4,9‐dione‐based structures and fluorinated acyl groups as the terminal units have been designed and synthesized for application as organic field‐effect transistor (OFET) materials. The thermal, photophysical, and electrochemical properties and OFET performance of the synthesized compounds were investigated. OFET evaluation revealed that all compounds exhibited typical electron‐transporting characteristics, and electron mobilities up to 0.26 cm² V^?1 s^?1 could be achieved. The air stabilities of OFET operation were dependent on the nature of the compounds and were investigated by X‐ray diffraction and atomic force microscopy. The terminal units had a great influence not only on the molecular properties, but also on the film‐forming properties and OFET performance.     

Fluorescent liquid crystalline compounds with 1,3,4-oxadiazole and benzo[b]thiophene units

A series of fluorescent liquid crystalline compounds containing 1,3,4-oxadiazole and benzo[b]thiophene units have been prepared. In CH₂Cl₂ solution, these compounds displayed a fluorescent emission with λ_max at 422–426 nm and quantum yields of 41–48%. Most of them exhibited thermotropic liquid crystalline properties with nematic and/or smectic A phases with excellent thermal stability. This work revealed that longer terminal alkoxy chains would be detrimental to the formation of mesophases for such kind of compounds. The effect of the terminal groups on mesomorphic and spectroscopic property is discussed.     

Solution‐Processable n‐Type Organic Field‐Effect Transistor (OFET) Materials Based on Carbonyl‐Bridged Bithiazole and Dioxocyclopentene‐Annelated Thiophenes

A series of electronegative π‐conjugated compounds composed of carbonyl‐bridged bithiazole and alkyl‐substituted dioxocyclopenta[b]thiophene were synthesized as a candidate for solution‐processable n‐type organic semiconductor materials and characterized on the basis of photophysical and electrochemical properties. Cyclic voltammetry measurements showed that the first half‐wave reduction potentials of these compounds are between −0.97 and −1.14 V versus ferrocene/ferrocenium, which corresponds to lowest unoccupied molecular orbital energy levels between −3.83 and −3.66 eV. Thanks to hexyl or dodecyl groups in the molecules, the compounds are sufficiently soluble to realize the fabrication of their thin films through a spin‐coating method. As a result, the prepared organic field‐effect transistors based on these newly developed compounds exhibited n‐channel characteristics not only under vacuum but also in air, and the best field‐effect electron mobility observed under vacuum was 0.011 cm² V⁻¹ s⁻¹ with an on/off ratio of 10⁸ and a threshold voltage of 16 V.     

Photophysics of Push–Pull Distyrylfurans,Thiophenes and Pyridines by Fast and Ultrafast Techniques

Time‐resolved transient absorption and fluorescence spectroscopy with nano‐ and femtosecond time resolution were used to investigate the deactivation pathways of the excited states of distyrylfuran, thiophene and pyridine derivatives in several organic solvents of different polarity in detail. The rate constant of the main decay processes (fluorescence, singlet–triplet intersystem crossing, isomerisation and internal conversion) are strongly affected by the nature [locally excited (LE) or charge transfer (CT)] and selective position of the lowest excited singlet states. In particular, the heteroaromatic central ring significantly enhances the intramolecular charge‐transfer process, which is operative even in a non‐polar solvent. Both the thiophene and pyridine moieties enhance the S₁→T₁ rate with respect to the furan one. This is due to the heavy‐atom effect (thiophene compounds) and to the ¹(π,π)*→³(n,π)* transition (pyridine compounds), which enhance the spin‐orbit coupling. Moreover, the solvent polarity also plays a significant role in the photophysical properties of these push–pull compounds: in fact, a particularly fast ¹LE*→¹CT* process was found for dimethylamino derivatives in the most polar solvents (time constant, τ≤400 fs), while it takes place in tens of picoseconds in non‐polar solvents. It was also shown that the CT character of the lowest excited singlet state decreased by replacing the dimethylamino side group with a methoxy one. The latter causes a decrease in the emissive decay and an enhancement of triplet‐state formation. The photoisomerisation mechanism (singlet/triplet) is also discussed.     

Convenient and Efficient Synthesis of 11‐Amino‐2,8‐substituted‐2,3,8,9‐tetrahydrobenzo[4,5]thieno[2,3‐b]quinolinone Derivatives

The Gewald reactions of 5‐substituted‐1,3‐cyclohexanedione, malononitrile, and powdered sulfur were carried out to give the corresponding products 2‐amino‐5‐substituted‐7‐oxo‐4,5,6,7‐tetrahydrobenzo[b]thiophene‐3‐carbonitrile derivatives 1 . The intermediate enamines 2 were prepared by reaction of compounds 1 and 5‐substituted‐1,3‐cyclohexanedione with hydrochloric acid as catalyst. The title compounds 11‐amino‐2,8‐substituted‐2,3,8,9‐tetrahydrobenzo[4,5]thieno[2,3‐b]quinolinone 3 were synthesized by cyclization of compounds 2 in the presence of K₂CO₃ and Cu₂Cl₂. The structures of all compounds were characterized by elemental analysis, IR, MS, and ¹H‐NMR spectra.     

Photochromic Dithienylethene‐Containing Triarylborane Derivatives: Facile Approach to Modulate Photochromic Properties with Multi‐addressable Functions

A series of dithienylethene‐containing triarylboranes has been designed, synthesized, and characterized. The electrochemistry, photophysics, and photochromic behavior have also been studied. The photophysical and photochromic properties could be facilely tuned in this system by varying the thiophene spacers (thiophene, thienothiophene, and bithiophene) between the dithienylethene and the dimesitylboron (BMes₂) or the position of the BMes₂ substitution in the thiophene spacers. The absorption of closed form has been found to be more sensitive towards the structural modification upon incorporation of the BMes₂ unit. Moreover, multi‐addressable photochromic reactivity is obtained upon addition of Lewis base (F^?), which is due to the formation of boron–Lewis base adduct. The dependence of the photophysical and photochromic properties on the thiophene spacers and the position of the BMes₂ substitution has been further supported by computational studies.     

Pyrene‐cored covalent organic polymers by thiophene‐based isomers,their gas adsorption,and photophysical properties

Two new pyrene‐cored covalent organic polymers (COPs), CK‐COP‐1 and CK‐COP‐2 , were synthesized via the one‐step polymerization of two thiophene‐based isomers, 1,3,6,8‐tetra(thiophene‐2‐yl) pyrene ( L₁ ) and 1,3,6,8‐tetra(thiophene‐3‐yl) pyrene ( L₂ ). The resulting pyrene‐cored COPs exhibit rather different surface areas of 54 m² g^?1 and 615 m²g^?1 for CK‐COP‐1 and CK‐COP‐2 , respectively. The CO₂ uptake capacities of CK‐COP‐1 and CK‐COP‐2 also show different values of 2.85 and 9.73 wt % at 273 K, respectively. Furthermore, CK‐COP‐2 offers not only a larger CO₂ adsorption capacity but also a better CO₂/CH₄ selectivity at 273 K compared with CK‐COP‐1 . CK‐COP‐1 and CK‐COP‐2 also exhibit considerable differences in their photophysical property. The different structure and properties of CK‐COPs could be attributed to the isomer effect of their corresponding thiophene‐based monomers. © 2017 Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2383–2389     

Asymmetrical Fluorene[2,3‐b]benzo[d]thiophene Derivatives: Synthesis,Solid‐State Structures,and Application in Solution‐Processable Organic Light‐Emitting Diodes

A series of novel asymmetrical fused compounds containing the backbone of fluorene[2,3‐b]benzo[d]thiophene (FBT) were effectively synthesized and fully characterized. Single‐crystal X‐ray studies demonstrated that the length of the substituent side chains greatly affects the solid‐state packing of the obtained fused compounds. DFT, photophysical, and electrochemical studies all showed that the FBTs have large band gaps, low‐lying HOMO energy levels, and therefore good stability toward oxidation. Moreover, the substituents strongly influence the fluorescence properties of the resulting FBT derivatives. The di‐n‐hexyl compound exhibits intense fluorescence in solution with the highest quantum yield of up to 91 %. Solution‐processed green phosphorescent organic light‐emitting diodes with the di‐n‐butyl derivative as the host material exhibited a maximum brightness of 14 185 cd m^?2 and a luminescence efficiency of 12 cd A^?1.     

Photophysical Properties of Coumarin‐30 Dye in Aprotic and Protic Solvents of Varying Polarities¶

Experimental results on various photophysical properties of coumarin‐30 (C30) dye, namely, Stokes' shift (Δv), fluorescence quantum yield (τ_f), fluorescence lifetime (τ_f), radiative rate constant (k_f) and nonradiative rate constant (k_nr), as obtained using absorption and fluorescence measurements have been reported. Though in most of the solvents the properties of C30 show more or less linear correlation with the solvent polarity function, Δf= [(ε ‐ 1)/(2ε+ 1) ‐ (n² ‐ 1)/ (2n²+ l)], they show unusual deviations in nonpolar solvents at one end and in high‐polarity protic solvents at the other end. From the solvent polarity and temperature effect on the photophysical properties of the dye, following inferences have been drawn: ( 1 ) in nonpolar solvents, the dye exists in a nonpolar structure, where its 7‐NEt₂ substituent adopts a pyramidal configuration and the amino lone pair is out of resonance with the benzopyrone π cloud; ( 2 ) in medium to higher polarity solvents, the dye exists in a polar intra‐molecular charge transfer structure, where the 7‐NEt₂ group and the 1,2‐benzopyrone moiety are in the same plane and the amino lone pair is in resonance with the benzopyrone π cloud; ( 3 ) in protic solvents, the dye‐solvent intermolecular hydrogen bonding influences the photophysical properties of the dye; and ( 4 ) in high‐polarity protic solvents, the excited C30 undergoes a new activation‐controlled nonradiative deexcitation process because of the involvement of a twisted intra‐molecular charge transfer (TICT) state. Contrary to most other TICT molecules, the activation barrier for this deexcitation process in C30 is observed to increase with solvent polarity. A rational for this unusual behavior has been given on the basis of the solvent polarity‐dependent stabilization and crossing of relevant electronic states and the relative propensity of interconversion among these states.     

A Near‐Infrared Dye That Undergoes Multiple Interconversions through Acid–Base Equilibrium and Reversible Redox Processes

A near‐infrared (NIR) polymethine dye ( 1 ), consisting of a cyclohepta[1,2‐b ;4,3‐b′ ]dithiophene and two phenol moieties, was synthesized. This dye exhibited pH‐responsive changes in its photophysical properties due to a two‐step acid–base equilibrium that produced a protonated cation ( 1H⁺ ) and an anion ( 1⁻ ). While 1H⁺ showed an intense fluorescence in the red region of the visible spectrum, 1⁻ exhibited a strong absorption in the NIR region. The tropylium ion character in 1H⁺ induces high pK _a1 and pK _a2 values for 1 . Moreover, a stable radical ( 1^. ) was prepared, which showed a NIR absorption band with a maximum at circa 1600 nm. The cyclic voltammogram of 1^. revealed a two‐step reversible redox process that produced 1⁻ and the cation 1⁺ , which is different from 1H⁺ . These redox processes accompany drastic electrochromic changes in the vis–NIR region. Overall, 1 is susceptible to multiple interconversions between five forms, due to the multifaceted character of the cycloheptadithiophene skeleton.     

Synthesis and photophysical properties of novel amphiphilic ruthenium (II) complexes containing 4,4′‐dialkylaminomethyl‐2,2′‐bipyridyl ligands

The synthesis of a number of new 2,2′‐bipyridine ligands functionalized with bulky amino side groups is reported. Three homoleptic polypyridyl ruthenium (II) complexes, [Ru(L)₃]²⁺ 2(PF₆^?), where L is 4,4′‐dioctylaminomethyl‐2,2′‐bipyridine (Ru4a), 4,4′‐didodecylaminomethyl‐2,2′‐bipyridine (Ru4b) and 4,4′‐dioctadodecylaminomethyl‐2,2′‐bipyridine (Ru4c), have been synthesized. These compounds were characterized and their photophysical properties examined. The electronic spectra of three complexes show pyridyl π → π* transitions in the UV region and metal‐to‐ligand charge transfer bands in the visible region. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis and Characterization of Extended Bis(terpyridine)ruthenium Amino Acids

(Oligopyridine)ruthenium(II) complexes have been widely used in dye sensitized solar cells and other sophisticated optical devices due to their outstanding photophysical properties and their chemical stability. Herein, we describe the longitudinal extension of our previously reported bis(terpyridine)ruthenium(II) amino acid [Ru(tpy–NH₂)(tpy–COOH)]²⁺ (tpy = 4′‐substituted 2,2′:6′,2″‐terpyridine) by insertion of para‐phenylene spacers –C₆H₄– between the terpyridine and the functional groups. The influence of the para‐phenylene spacer on the absorption and emission properties is investigated using UV/Vis absorption and emission spectroscopy and is discussed within a qualitative molecular orbital picture.     

Impact of the Synergistic Collaboration of Oligothiophene Bridges and Ruthenium Complexes on the Optical Properties of Dumbbell‐Shaped Compounds

The linear and non‐linear optical properties of a family of dumbbell‐shaped dinuclear complexes, in which an oligothiophene chain with various numbers of rings (1, 3, and 6) acts as a bridge between two homoleptic tris(2,2′‐bipyridine)ruthenium(II) complexes, have been fully investigated by using a range of spectroscopic techniques (absorption and luminescence, transient absorption, Raman, and non‐linear absorption), together with density functional theory calculations. Our results shed light on the impact of the synergistic collaboration between the electronic structures of the two chemical moieties on the optical properties of these materials. Experiments on the linear optical properties of these compounds indicated that the length of the oligothiophene bridge was critical for luminescent behavior. Indeed, no emission was detected for compounds with long oligothiophene bridges (compounds 3 and 4 , with 3 and 6 thiophene rings, respectively), owing to the presence of the ³π? π* state of the conjugated bridge below the ³MLCT‐emitting states of the end‐capping Ru^II complexes. In contrast, the compound with the shortest bridge ( 2 , one thiophene ring) shows excellent photophysical features. Non‐linear optical experiments showed that the investigated compounds were strong non‐linear absorbers in wide energy ranges. Indeed, their non‐linear absorption was augmented upon increasing the length of the oligothiophene bridge. In particular, the compound with the longest oligothiophene bridge not only showed strong two‐photon absorption (TPA) but also noteworthy three‐photon‐absorption behavior, with a cross‐section value of 4×10^?78 cm⁶ s² at 1450 nm. This characteristic was complemented by the strong excited‐state absorption (ESA) that was observed for compounds 3 and 4 . As a matter of fact, the overlap between the non‐linear absorption and ESA establishes compounds 3 and 4 as good candidates for optical‐power‐limiting applications.     

Supramolecular architectures in CoII and CuII complexes with thiophene‐2‐carboxylate and 2‐amino‐4,6‐dimethoxypyrimidine ligands

The coordination chemistry of mixed‐ligand complexes continues to be an active area of research since these compounds have a wide range of applications. Many coordination polymers and metal–organic framworks are emerging as novel functional materials. Aminopyrimidine and its derivatives are flexible ligands with versatile binding and coordination modes which have been proven to be useful in the construction of organic–inorganic hybrid materials and coordination polymers. Thiophenecarboxylic acid, its derivatives and their complexes exhibit pharmacological properties. Cobalt(II) and copper(II) complexes of thiophenecarboxylate have many biological applications, for example, as antifungal and antitumor agents. Two new cobalt(II) and copper(II) complexes incorporating thiophene‐2‐carboxylate (2‐TPC) and 2‐amino‐4,6‐dimethoxypyrimidine (OMP) ligands have been synthesized and characterized by X‐ray diffraction studies, namely (2‐amino‐4,6‐dimethoxypyrimidine‐κN)aquachlorido(thiophene‐2‐carboxylato‐κO)cobalt(II) monohydrate, [Co(C₅H₃O₂S)Cl(C₆H₉N₃O₂)(H₂O)]·H₂O, (I), and catena‐poly[copper(II)‐tetrakis(μ‐thiophene‐2‐carboxylato‐κ²O:O′)‐copper(II)‐(μ‐2‐amino‐4,6‐dimethoxypyrimidine‐κ²N¹:N³)], [Cu₂(C₅H₃O₂S)₄(C₆H₉N₃O₂)]_n, (II). In (I), the Co^II ion has a distorted tetrahedral coordination environment involving one O atom from a monodentate 2‐TPC ligand, one N atom from an OMP ligand, one chloride ligand and one O atom of a water molecule. An additional water molecule is present in the asymmetric unit. The amino group of the coordinated OMP molecule and the coordinated carboxylate O atom of the 2‐TPC ligand form an interligand N—H…O hydrogen bond, generating an S(6) ring motif. The pyrimidine molecules also form a base pair [R₂²(8) motif] via a pair of N—H…N hydrogen bonds. These interactions, together with O—H…O and O—H…Cl hydrogen bonds and π–π stacking interactions, generate a three‐dimensional supramolecular architecture. The one‐dimensional coordination polymer (II) contains the classical paddle‐wheel [Cu₂(CH₃COO)₄(H₂O)₂] unit, where each carboxylate group of four 2‐TPC ligands bridges two square‐pyramidally coordinated Cu^II ions and the apically coordinated OMP ligands bridge the dinuclear copper units. Each dinuclear copper unit has a crystallographic inversion centre, whereas the bridging OMP ligand has crystallographic twofold symmetry. The one‐dimensional polymeric chains self‐assemble via N—H…O, π–π and C—H…π interactions, generating a three‐dimensional supramolecular architecture.     

Synthesis and liquid crystalline properties of substituted 2,5‐diaryl 1,3,4‐oxadiazole derivatives without flexible chains

A series of new compounds based on aromatically 2,5‐disubstituted 1,3,4‐oxadiazoles without flexible chains, formulated as p‐R–C₆H₄–(OC₂N₂)–(p‐C₆H₄)₂–R′ with (i) R = CH₃O, R′ = CH₃O, CH₃S, F, H (Ia–Id), (ii) R = CH₃S, R′ = CH₃O, CH₃S, F, H (IIa–IId) and (iii) R = F, R′ = CH₃O, CH₃S, F, H (IIIa–IIId) (p‐C₆H₄ and OC₂N₂ represent a p‐phenylene spacer and a 1,3,4‐oxadiazole ring, respectively), were synthesised and characterised by ¹H and ¹³C NMR, MS and HRMS techniques. Mesomorphic properties were investigated using differential scanning calorimetry and polarizing optical microscopy. All of the target compounds (except Id, IId, IIIc and IIId) exhibited an enantiotropic nematic mesophase with high melting temperatures. The liquid crystalline properties of these compounds were influenced greatly by polarity, steric factors and positions of the terminal groups. The effect of the terminal groups on the liquid crystal properties is discussed.     

Coumarin‐3‐Aldehyde as a Scaffold for the Design of Tunable PET‐Modulated Fluorescent Sensors for Neurotransmitters

NeuroSensor 521 (NS521) is a fluorescent sensor for primary‐amine neurotransmitters based on a platform that consists of an aryl moiety appended to position C4 of the coumarin‐3‐aldehyde scaffold. We demonstrate that sensors based on this platform behave as a directly linked donor–acceptor system that operates through an intramolecular acceptor‐excited photoinduced electron transfer (a‐PET) mechanism. To evaluate the PET process, a series of benzene‐ and thiophene‐substituted derivatives were prepared and the photophysical properties, binding affinities, and fluorescence responses toward glutamate, norepinephrine, and dopamine were determined. The calculated energy of the highest occupied molecular orbital (E_HOMO) of the pendant aryl substituents, along with oxidation and reduction potential values derived from the calculated molecular orbital energy values of the platform components, allowed for calculation of the fluorescence properties of the benzene sensor series. Interestingly, the thiophene derivatives did not fit the typical PET model, highlighting the limitations of the method. A new sensor, NeuroSensor 539, displayed enhanced photophysical properties aptly suited for biological imaging. NeuroSensor 539 was validated by selectively labeling and imaging norepinephrine in secretory vesicles of live chromaffin cells.     

Syntheses and Properties of meso‐Substituted Porphyrin Mesogens with Triazole Linkages and Peripheral Alkyl Chains

Discotic mesogens P/n‐M (n=12, 16, 18, M=2 H, Zn and Cu) bearing a porphyrin core, triazole linkages and peripheral 3,4,5‐trialkoxybenzyl units have been synthesized by a click‐chemistry approach. The thermal behavior, photophysical properties and morphologies of these compounds were investigated by polarized optical microscopy (POM), differential scanning calorimetry (DSC), XRD, UV and PL, SEM and TEM. These compounds can self‐assemble into hexagonal columnar phases in their pure states and form organogels in 1,4‐dioxane with unusually flower‐like sphere morphology. The supramolecular complexes of P/18‐Zn with C₇₀ or 4,7‐di‐4‐pydriyl‐2,1,3‐benzothadiazole can display hexagonal columnar phases too. Additionally, zinc porphyrin compounds P/n‐Zn show binding selectivity to Cu²⁺ among a series of cations in THF/H₂O.     

Synthesis and Reactions of Some Heterocyclic Candidates Based on 2‐Amino‐4,5,6,7‐tetrahydrobenzo[b]thiophene Moiety as Anti‐Arrhythmic Agents

In continuation of our previous work, a series of novel thiophene derivatives 4 , 5 , 6 , 8 , 9 , 9a , 9b , 9c , 9d , 9e , 10 , 10a , 10b , 10c , 10d , 10e , 11 , 12 , 13 , 14 , 15 , 16 were synthesized by the reaction of ethyl 2‐amino‐4,5,6,7‐tetrahydrobenzo[b]thiophene‐3‐carboxylate ( 1 ) or 2‐amino‐4,5,6,7‐tetrahydrobenzo[b]thiophene‐3‐carbonitrile ( 2 ) with different organic reagents. Fusion of 1 with ethylcyanoacetate or maleic anhydride afforded the corresponding thienooxazinone derivative 4 and N‐thienylmalimide derivative 5 , respectively. Acylation of 1 with chloroacetylchloride afforded the amide 6 , which was cyclized with ammonium thiocyanate to give the corresponding N‐theinylthiazole derivative 8 . On the other hand, reaction of 1 with substituted aroylisothiocyanate derivatives gave the corresponding thiourea derivatives 9a , 9b , 9c , 9d , 9e , which were cyclized by the action of sodium ethoxide to afford the corresponding N‐substituted thiopyrimidine derivatives 10a , 10b , 10c , 10d , 10e . Condensation of 2 with acid anhydrides in refluxing acetic acid afforded the corresponding imide carbonitrile derivatives 11 , 12 , 13 . Similarly, condensation of 1 with the previous acid anhydride yielded the corresponding imide ethyl ester derivatives 14 , 15 , 16 , respectively. The structures of newly synthesized compounds were confirmed by IR, ¹H NMR, ¹³C NMR, MS spectral data, and elemental analysis. The detailed synthesis, spectroscopic data, LD₅₀, and pharmacological activities of the synthesized compounds are reported.     

Photophysical Analysis of 1,10‐Phenanthroline‐Embedded Porphyrin Analogues and Their Magnesium(II) Complexes

The synthesis, characterization, photophysical properties, and theoretical analysis of a series of tetraaza porphyrin analogues ( H? Pn : n=1–4) containing a dipyrrin subunit and an embedded 1,10‐phenanthroline subunit are described. The meso‐phenyl‐substituted derivative ( H? P1 ) interacts with a Mg²⁺ salt (e.g., MgCl₂, MgBr₂, MgI₂, Mg(ClO₄)₂, and Mg(OAc)₂) in MeCN solution, thereby giving rise to a cation‐dependent red‐shift in both the absorbance‐ and emission maxima. In this system, as well as in the other H? Pn porphyrin analogues used in this study, the four nitrogen atoms of the ligand interact with the bound magnesium cation to form Mg²⁺–dipyrrin–phenanthroline complexes of the general structure MgX? Pn (X=counteranion). Both single‐crystal X‐ray diffraction analysis of the corresponding zinc‐chloride derivative ( ZnCl? P1 ) and fluorescence spectroscopy of the Mg‐adducts that are formed from various metal salts provide support for the conclusion that, in complexes such as MgCl? P1 , a distorted square‐pyramidal geometry persists about the metal cation wherein a chloride anion acts as an axial counteranion. Several analogues ( H? Pn ) that contain electron‐donating and/or electron‐withdrawing dipyrrin moieties were prepared in an effort to understand the structure–property relationships and the photophysical attributes of these Mg–dipyrrin complexes. Analysis of various MgX? Pn (X=anion) systems revealed significant substitution effects on their chemical, electrochemical, and photophysical properties, as well as on the Mg²⁺‐cation affinities. The fluorescence properties of MgCl? Pn reflected the effect of donor‐excited photoinduced electron transfer (d‐PET) processes from the dipyrrin subunit (as a donor site) to the 1,10‐phenanthroline acceptor subunit. The proposed d‐PET process was analyzed by electron paramagnetic resonance (EPR) spectroscopy and by femtosecond transient absorption (TA) spectroscopy, as well as by theoretical DFT calculations. Taken together, these studies provide support for the suggestion that a radical species is produced as the result of an intramolecular charge‐transfer process, following photoexcitation. These photophysical effects, combined with a mixed dipyrrin–phenanthroline structure that is capable of effective Mg²⁺‐cation complexation, lead us to suggest that porphyrin‐inspired systems, such as H? Pn , have a role to play as magnesium‐cation sensors.     

Molecular Heterostructures of Covalent Triazine Frameworks for Enhanced Photocatalytic Hydrogen Production

Conjugated polymers have emerged as promising candidates for photocatalytic H₂ production owing to their structural designability and functional diversity. However, the fast recombination of photoexcited electrons and holes limits their H₂ production rates. We have now designed molecular heterostructures of covalent triazine frameworks to facilitate charge‐carrier separation and promote photocatalytic H₂ production. Benzothiadiazole and thiophene moieties were selectively incorporated into the covalent triazine frameworks as electron‐withdrawing and electron‐donating units, respectively, by a sequential polymerization strategy. The resulting hybrids exhibited much improved charge‐carrier‐separation efficiency as evidenced by photophysical and electrochemical characterization. An H₂ evolution rate of 6.6 mmol g^?1 h^?1 was measured for the optimal sample under visible‐light irradiation (λ>420 nm), which is far superior to that of most reported conjugated‐polymer photocatalysts.