Colorimetric detection of histidine in aqueous solution by Ni2+ complex of a thiazolylazo dye based on indicator displacement mechanism

A colorimetric naked-eye chemosensor for histidine (His) was established by mixing a thiazolylazo dye and Ni²⁺ in a 1:1?M ratio (TAMSMB-Ni²⁺). Due to the interaction of Ni²⁺ with His, TAMSMB was regenerated upon the addition of His to TAMSMB-Ni²⁺ to lead a significant hypsochromic shift in absorption spectra accompanied by a visual color change from red to yellow which can be directly observed by the naked eye. On the other hands, other amino acids did not trigger any significant changes in absorption properties and solution color. Moreover, it exhibited the selective recognition of His without obvious interference from other amino acids. Thus, TAMSMB-Ni²⁺ can act as a simple and efficient colorimetric chemosensor for His with sensitivity and selectivity in aqueous solution.     

Lighting‐Up of the Dye Malachite Green with Mercury(II)–DNA and Its Application for Fluorescence Turn‐Off Detection of Cysteine and Glutathione

This work describes a novel strategy for the highly sensitive and selective detection of cysteine (Cys) and glutathione (GSH) based on the Hg²⁺–AGRO100–malachite green (MG) complex system. The dye MG, which has a very low quantum yield in aqueous solution by itself, can bind with the thymine‐rich DNA AGRO100 in the presence of Hg²⁺ ions to generate a striking fluorescence intensity enhancement of 1000‐fold. As sulfur‐containing amino acids, Cys and GSH effectively sequester Hg²⁺ ions from the Hg²⁺–AGRO100–MG complex structure to switch the ‘lit‐up’ chemosensor to the ‘off’ state (about a 50‐fold fluorescence intensity decrease), thus providing a facile, but effective, method to probe for Cys/GSH. The fluorescence titration, UV absorption, CD, and Raman spectra provide some insight into the structural and chemical basis for the enhancement effect. The formation of the Hg²⁺–AGRO100–MG complex significantly affects the electronic structure and conformation of the MG molecule by leading to an extended π system, which is the likely origin of the observed striking fluorescence intensity enhancement. Notably, the proposed sensing platform exhibits exquisite selectivity and sensitivity toward Cys/GSH with limits of detection of 5 nM for Cys and 10 nM for GSH, respectively. Furthermore, the straightforward assay design avoids labeling of the probe, uses only commercially available materials, and still displays comparable sensitivity and excellent selectivity.     

Colorimetric chemosensor for Fe<Superscript>2+</Superscript> and Fe<Superscript>3+</Superscript> based on a ternary mixture of an anionic dye,a cationic polyelectrolyte,and a metal chelator in aqueous solution

A new colorimetric chemosensor based on a simple ternary mixture of an anionic dye, pyrogallol red (PR), a cationic polyelectrolyte, poly(diallyldimethylammonium chloride) (PDADMAC), and a metal chelator, N-(2-hydroxyethyl) ethylenediaminetriacetic acid (HEDTA) for the colorimetric detection of Fe²⁺ and Fe³⁺ has been developed in an aqueous solution buffered at pH 5. Upon addition of Fe²⁺ or Fe³⁺ to the mixture, the absorption spectra showed a bathochromic shift; correspondingly, the solution color changed from red to blue, whereas other metal ions basically resulted in insignificant spectral and color changes. From the competitive experiments, no obvious interferences for the colorimetric detection of Fe²⁺ and Fe³⁺ were observed in the presence other metal ions. The results indicated that the mixture could be used as a potential Fe²⁺ and Fe³⁺ colorimetric and naked eye chemosensor in aqueous media. This research demonstrates that the ternary ensemble consisted of an organic dye, an oppositely charged polyelectrolyte, and a metal chelator is a versatile and convenient tool for the facile preparation of a novel chemosensor system.     

Supramolecular assembly of a new squaraine and β-cyclodextrin for detection of thiol-containing amino acids in water

A new unsymmetrical aniline-based squaraine (SQ2) bearing binding unit of Hg²⁺ ion was designed and synthesised. SQ2 can form 1:2 inclusion complex with β-cyclodextrin, and the resulting complex, which undergoes absorption and fluorescence bleaching upon binding Hg²⁺, can serve as a turn-on colorimetric or fluorescent chemosensor in organic solvent-free aqueous solution for thiol-containing amino acids with high selectivity and tunable measuring range.     

Sequential detection of Cu2+ and cysteine using an imidazole‐based chemosensor in aqueous solution

A highly substituted imidazole‐based colorimetric and fluorogenic chemosensor, 2‐methoxy‐4‐(4,5‐diphenyl‐1H‐imidazol‐2‐yl)phenol (L), for the detection of Cu²⁺ ion and subsequent colorimetric detection of an amino acid, cysteine, was investigated. L exhibited a distinct color change from colorless to red in the presence of Cu²⁺ in an aqueous medium. The L‐Cu²⁺ complex can also be used to detect cysteine by the naked eye over a series of amino acids. The receptor L behaves as a highly selective colorimetric and fluorescent sensor for Cu²⁺ ions at concentrations as low as 4.33 and 2.25 μM, respectively. These values are much less compared to the WHO recommended limit of 30 μM for Cu²⁺ in drinking water. From Job's plot and the ESI‐MS spectrum, a 1:1 stoichiometric complex between L and Cu²⁺ ions can readily be reckoned. This binding was also substantiated by the EPR spectrum and magnetic susceptibility measurements. Additionally, the binding of L with Cu²⁺ ions was also manifested in the detection of B16F10 cells. This was substantiated through fluorescence microscopy. The spectrum of the L‐Cu²⁺ entity was also attempted to reproduce theoretically. The probable structure of this was also propounded through Density Functional Theory.     

A Novel Fluorescent Probe Based on Perylene Derivative for Hg2+ Ions and Biological Thiols and its Application in Live Cell Imaging and Theoretical Calculations

The selective and sensitive detection of biothiols; cysteine (Cys), homocysteine (Hcy) and glutathione (GSH) in aqueous solutions is of considerable importance because of their pivotal roles in maintaining the reducing environment in the cells. This study describes a strategy for the determination of biothiols based on the PDI/Met‐Hg²⁺complex platform. We designed and fabricated methionine modified perylene diimide molecule as a selective sensing probe for Hg²⁺ ions in aqueous solutions ( PDI/Met‐Hg ²⁺). The complex between perylene bisimide derivative ( PDI/Met) and Hg²⁺ was investigated and it demonstrated turn‐on fluorescence response for the detection of the biological thiols. Besides, PDI/Met displayed fluorescence quenching response in the presence of mercury ions and the emission intensity of PDI/Met‐Hg²⁺ was recovered after transferring biothiols (Cys, Hcy, and GSH). Thus, PDI/Met could be utilized as a fluorescent chemosensor for the sequential recognition of mercury ions and biological thiols.     

A Simple Colorimetric Sensor with High Selectivity for Mercury Cation in Aqueous Solution

Abstract

A simple and sensitive mercapto thiadiazole Schiff-base colorimetric chemosensor 2 was synthesized. It exhibits good selectivity and sensitivity for the mercury cation over other metal cations such as Zn²⁺, Pb²⁺, Cd²⁺, Ni²⁺, Co²⁺, Ag⁺, Ca²⁺, Mg²⁺, and Cr³⁺ in both aqueous solution and on paper-made test kits. The change in color is very easily observed by the naked eye for the presence of Hg²⁺ cation, whereas other metal cations do not induce such a change. The chemosensor 2 showed remarkably anti-interference ability toward other metal cations and the detection limit toward Hg²⁺ was 1.5 × 10^?5 M.

GRAPHICAL ABSTRACT      

A highly selective colorimetric sensor for Hg2+ based on a copper (II) complex of thiosemicarbazone in aqueous solutions

By applying an indirect strategy, a new copper (Ⅱ) complex of a thiosemicarbazone L has been successfully developed as a colorimetric chemosensor for the sensitive detection of mercury (Ⅱ) ions. In the presence of copper (Ⅱ) ions, the colorless solution of L became yellow; however, upon the addition of traces of mercury (Ⅱ) ions, the yellow color faded to colorless immediately. Other ions, including Fe3+ , Ag+ , Ca2+ , Zn2+ , Pb2+ , Cd2+ , Ni2+ , Co2+ , Cr3+ and Mg2+ had a negligible influence on the probe behavior. The detection limits were 5.0×10 -6 M and 3.0×10 -7 M of Hg2+ using the visual color changes and UV-vis changes respectively. Test strips based on Cu-L were fabricated, which could act as a convenient and efficient Hg2+ test kits.     

Colorimetric detection of Ni2+ based on an anionic triphenylmethane dye and a cationic polyelectrolyte in aqueous solution

The combination of xylenol orange (XO) and poly(diallyldimethylammonium chloride) (PDADMAC) has been utilized as a colorimetric sensor for selective recognition of Ni²⁺ in aqueous solution. Upon addition of Ni²⁺, the chemosensor exhibited the significant color change from red to purple with a bathochromic shift, whereas these change was not induced by other metal ions. XO alone did not recognize Ni²⁺ colorimetrically, indicating that PDADMAC was required for detecting Ni²⁺. This study can provide the facile method for the construction of new chemosensors by a simple mixture of an anionic water-soluble dye and cationic polyelectrolyte.     

A dual-function colorimetric chemosensor for thiols and transition metal ions based on ICT mechanism

Remarkable absorption spectral changes were observed for compound 1 with N,N-bis(pyridin-2-yl-methyl) aniline and quinone units after either reaction with thiol-containing amino acids/peptides or coordination with Zn²⁺/Co²⁺. Therefore, compound 1 is a potential dual-function colorimetric chemosensor for thiol-containing amino acids/peptides and Zn²⁺/Co²⁺.     

A selective colorimetric chemosensor for thiols based on intramolecular charge transfer mechanism

Compound 1 as an electron donor-acceptor compound with N,N-dimethylaniline and quinone units was designed for a highly selective colorimetric determination of thiol-containing amino acids and peptides, by making use of the unique reactivity of thiol towards quinone. Compound 1 shows a strong intramolecular charge transfer (ICT) band around 582 nm; but, it decreased after addition of either cysteine (Cys) or glutathione (GSH). Moreover, the ICT band intensity at 582 nm decreased linearly with the increasing concentrations of Cys or GSH. The interference from other amino acids can be neglected. Therefore, compound 1 can be employed as a selective colorimetric visual chemosensor for thiol-containing amino acids and peptides.     

An NBD-based colorimetric and fluorescent chemosensor for Zn and its use for detection of intracellular zinc ions

A new 7-nitrobenz-2-oxa-1,3-diazole (NBD) based colorimetric and fluorescence chemosensor for Zn²⁺, an ion involved in many biological processes, was designed and synthesized. The NBD-probe 1 displays a red-to-yellow color change and an enhancement of fluorescent intensity in the presence of an aqueous solution of Zn²⁺ ions (pH 7.2). Internal charge transfer (ICT) and photoinduced electron transfer (PET) mechanisms are responsible for these changes. The practical use of this probe was demonstrated by its application to the biologically relevant detection of Zn²⁺ ions in pancreatic β-cells.     

Colorimetric and fluorescent chemosensor for citrate based on a rhodamine and Pb complex in aqueous solution

In this paper we unveil a novel rhodamine compound based fluorescent chemosensor (1-Pb²⁺) for colormetric and fluorescent detection of citrate in aqueous solution. This is the first fluorescent chemosensor for citrate based on rhodamine compound. The comparison of this method with some other fluorescence methods for citrate indicates that the method can detect citrate in aqueous solution by both color changes and fluorescent changes with long emission wavelength. In the new developed sensing system, 1-Pb²⁺ is fluorescent due to Pb²⁺-induced fluorescence enhancement of 1. However, the addition of citrate may release 1 into the solution with quenching of fluorescence. The chemosensor can be applied to the quantification of citrate with a linear range covering from 1.0 × 10⁻⁷ to 5.0 × 10⁻⁵ M and a detection limit of 2.5 × 10⁻⁸ M. The experiment results show that the response behavior of 1-Pb²⁺ towards citrate is pH independent in medium condition (pH 6.0–8.0). Most importantly, the fluorescence changes of the chemosensor are remarkably specific for citrate in the presence of other anions (even those that exist in high concentration), which meet the selective requirements for practical application. Moreover, the response of the chemosensor toward citrate is fast (response time less than 1 min). In addition, the chemosensor has been used for determination of citrate in urine samples with satisfactory results.     

Synthesis,Kinetics, and Equilibrium Study of Highly Sensitive Colorimetric Chemosensor for Monitoring of Copper Ions based on Benzo[f]fluorescein Dye Derivatives

The colorimetric chemosensor 2‐((3,5‐dichloro‐2‐hydroxybenzylidene)amino)‐3′,6′‐dihydroxy‐6‐methyl‐4‐(p‐tolyl)spiro[benzo[f]isoindole‐1,9′‐xanthen]‐3(2H)‐one ( BFFSH ) derived from benzo[f]fluorescein dye was synthesized. NMR and IR spectroscopy as well as mass spectrometry were used to confirm the compound. BFFSH shows potential application for detecting metal ions in aqueous solution. It displays a colorimetric selectivity and sensitivity towards the aqueous solution of Cu²⁺ ions with a detection limit in the nano‐molar range (1.69 nM). In addition, the application of BFFSH was extended for the detection of Cu²⁺ ions in real water samples (tap and synthetic water) with a high recovery percentage. Additionally, the association constant (K_a) of BFFSH , which binds with Cu²⁺ ions based on 2:1 stoichiometry was calculated.     

A simple dual-channel sensor for detecting cyanide in water with high selectivity and sensitivity

Taking advantage of the special nucleophilicity of cyanide, a new simple colorimetric chemosensor has been synthesised. This allows a deprotonation reaction to monitoring the cyanide. With the addition of CN^? to the chemosensor aqueous solution, which could induce a change in the solution colour from yellowish to deep yellow, while no colour change could be observed in the presence of other hackneyed anions, by which CN^? can be distinguished from other anions immediate with the naked eye. At the same time, a fluorescence quenching was implemented upon adding cyanide into the chemosensor aqueous solution. The absorption spectra detection limits of the chemosensor for cyanide was 5.35 × 10^?8 M and the fluorescence spectra detection limit was 2.63 × 10^?8 M. The cyanide test strips based on the chemosensor could serve as a convenient cyanide test kits. Furthermore, the chemosensor was successfully applied to detect cyanide in sprouting potatoes.     

Benzothiazole‐Pyimidine‐Based BF2 Complex for Selective Detection of Cysteine

Due to the similar structure and reactivity of cysteine (Cys), homocysteine (Hcy) and glutathione (GSH), the simultaneous discrimination of Cys over Hcy and GSH by a single fluorescent sensor is still a great challenge. In this work, a benzothiazole‐pyimidine‐based boron difluoride complex ( BPB ) was developed as a new fluorescent sensor for Cys. The sensor exhibits a highly selective “turn‐on” response to cysteine over Hcy, GSH and other amino acids in aqueous solution at physiological pH. The observed pseudo‐first‐order rate constant for the reaction of BPB with Cys was calculated to be about 0.062 min⁻¹. The detection limit of this sensor for Cys was determined to be 332 nm, and bioimaging of exogenous Cys by this sensor was successfully applied in living cells, thus indicating that this sensor holds great potential for biological applications.     

A novel and synthetically facile coumarin-thiophene-derived Schiff base for selective fluorescent detection of cyanide anions in aqueous solution: Synthesis,anion interactions,theoretical study and DNA-binding properties

A colorimetric and fluorescent chemosensor (chemosensor 2) for the detection of cyanide anions in aqueous solution has been designed and synthesized in high yield. The sensing mechanism of the chemosensor was verified via UV–vis, fluorimetric, and NMR titrations, and was theoretically explained using DFT and TD-DFT calculations. The chemosensor could optically discriminate the presence of fluoride ions over other anions by a color change from yellow to red with an enhancement of pink fluorescence in DMSO. However, it showed strong green fluorescence when CN^? was added to a mixture of DMSO/water (6:4 v/v). Thus, the chemosensor can be employed in selective detecting of CN^? besides other interference anions (F^?, AcO^? and H₂PO₄^?) in aqueous solution. Moreover, 2 can be used to detect CN^? at a concentration as low as 0.32?μM, which is lower than the WHO guideline (2.7?μM) for cyanide. A low quantity of CN^? (1.08?μM) can be detected and quantified using the prepared chemosensor. Moreover, the UV–vis and fluorescence spectroscopy studies of the interactions between 2 and dublex DNA revealed intercalative binding of calf thymus DNA to the chemosensor.     

A Highly Selective and Sensitive Turn-On Fluorescent Chemosensor Based on Rhodamine 6G for Iron(III)

Recently, more and more rhodamine derivatives have been used as fluorophores to construct sensors due to their excellent spectroscopic properties. A rhodamine-based fluorescent and colorimetric Fe³⁺ chemosensor 3’,6’-bis(ethylamino)-2-acetoxyl-2’,7’-dimethyl-spiro[1H-isoindole-1,9’-[9H]xanthen]-3(2H)-one (RAE) was designed and synthesized. Upon the addition of Fe³⁺, the dramatic enhancement of both fluorescence and absorbance intensity, as well as the color change of the solution, could be observed. The detection limit of RAE for Fe³⁺ was around 7.98 ppb. Common coexistent metal ions showed little or no interference in the detection of Fe³⁺. Moreover, the addition of CN⁻ could quench the fluorescence of the acetonitrile solution of RAE and Fe³⁺, indicating the regeneration of the chemosensor RAE. The robust nature of the sensor was shown by the detection of Fe³⁺ even after repeated rounds of quenching. As iron is a ubiquitous metal in cells and plays vital roles in many biological processes, this chemosensor could be developed to have applications in biological studies.     

Colorimetric determination of Cu2+ in simulated wastewater using naphthalimide-based Schiff base

A new Cu²⁺-selective colorimetric sensor was developed by combining the chromophore 3-hydroxynaphthalimide with diaminomaleonitrile. The sensor showed Cu²⁺-selective colorimetric signaling behavior in dimethylsulfoxide, indicated by a solution color change from yellow to pink, which was readily discernible without any external devices. Practical application of the sensor to the detection of Cu²⁺ in an aqueous solution containing other environmentally relevant metal ions by selective two-phase liquid-liquid extraction with ethyl acetate was possible. Particularly, extractive signaling of Cu²⁺ in simulated semiconductor wastewater with a readily-usable smartphone as a colorimetric data capture and analysis tool was successfully conducted.     

A colorimetric and fluorescent chemosensor for detection of Hg2+ using counterion exchange of cationic polydiacetylene

In this study, a colorimetric and fluorescent chemosensor for mercury ions (Hg²⁺) was developed. Cationic polydiacetylene (PDA) vesicles with a quaternary ammonium cation and iodide as a counterion show a blue-to-red color transition; the color change is accompanied by a fluorescence enhancement in selective response to Hg²⁺ ions because of a perturbation of the ene–yne conjugated backbone induced by counterion exchange. It allows for selective detection of Hg²⁺ with the naked eye and the sensor is used to determine Hg²⁺ concentrations in tap water samples.