Synthesis and molecular structures of phenylamides of magnesium, calcium, strontium, and barium--from molecular to polymeric structures

Several preparative procedures for the synthesis of the THF complexes of the alkaline earth metal bis(phenylamides) of Mg (1), Ca (2), Sr (3), and Ba (4) are presented such as metalation of aniline with strontium and barium, metathesis reactions of MI2 with KN(H)Ph, and metalation of aniline with arylcalcium compounds or dialkylmagnesium. The THF content of these compounds is rather low and an increasing aggregation is observed with the size of the metal atom. Thus, tetrameric [(THF)2Ca{mu-N(H)Ph}2]4 (2) and polymeric [(THF)2Sr{mu-N(H)Ph}2]infinity and {[(THF)2Ba{mu-N(H)Ph}2]2[(THF)Ba{mu-N(H)Ph}2]2}infinity show six-coordinate metal atoms with increasing interactions to the pi systems of the phenyl groups with increasing the radius of the alkaline earth metal atom.     

Synthesis and structural variations of substituted phenylamide complexes of the heavy alkaline earth metals calcium, strontium and barium

Starting material KN(H)C(6)H(3)-2,6-F(2) was prepared via a transamination reaction from KNH(2) and 2,6-F(2)C(6)H(3)NH(2) in THF and crystallized from 1,4-dioxane (diox) as the three-dimensional polymer [(diox)(1.5)K{N(H)-2,6-F(2)C(6)H(3)}.diox(0.5)](infinity) (1). The metathesis reaction of (THF)(4)CaI(2) with KN(Me)Ph in THF yields monomeric (THF)(4)Ca[N(Me)Ph](2) (2) with a nearly linear N-Ca-N moiety of 179.84(8) degrees . The metathesis reaction of (THF)(4)CaI(2) with KN(H)Mes yields trinuclear (THF)(6)Ca(3)[N(H)Mes](6) (3) with a linear Ca(3) fragment and bridging 2,4,6-trimethylphenylamido groups. The reaction of 1 with (THF)(4)CaI(2) gives dinuclear (THF)(5)Ca(2)[N(H)-2,6-F(2)C(6)H(3)](4).2THF (4) with three bridging and one terminally bound 2,6-difluorophenylamide. A similar reaction of (THF)(5)SrI(2) with KN(H)-2,6-F(2)C(6)H(3) yields dinuclear (THF)(6)Sr(2)[N(H)-2,6-F(2)C(6)H(3)](3)I.THF (5) in which the iodide anion binds terminally. This iodide ligand cannot be substituted as easily by excess KN(H)-2,6-F(2)C(6)H(3). The metathesis reaction of (THF)(5)BaI(2) with KN(H)-2,6-F(2)C(6)H(3) leads to the formation of [(THF)(2)Ba{N(H)-2,6-F(2)C(6)H(3)}(2)](infinity) (6) which crystallizes as a one-dimensional polymer with bridging 2,6-difluorophenylamide anions and additional Ba-F-bonds.     

SHOP-type nickel complexes with alkyl substituents on phosphorus, synthesis and catalytic ethylene oligomerization

The beta-keto phosphorus ylides (n-Bu)3P=CHC(O)Ph 6, (t-Bu)2PhP=CHC(O)Ph 7, (t-Bu)Ph2P=CHC(O)Ph 8, (n-Bu)2PhP=CHC(O)Ph 9, (n-Bu)Ph2P=CHC(O)Ph 10, Me2PhP=CHC(O)Ph 11 and Ph3P=CHC(O)(o-OMe-C6H4) 12 have been synthesized in 80-96% yields. The Ni(II) complexes [NiPh{Ph2PCH...C(...O)(o-OMeC6H4)}(PPh3)] 13, [NiPh{Ph(t-Bu)PCHC(O)Ph}(PPh3)] 15, [NiPh{(n-Bu)2PCH...C(...O)Ph}(PPh3)] 16 and [NiPh{Ph(n-Bu)PCH...C(...O)Ph}(PPh3)] 17 have been prepared by reaction of equimolar amounts of [Ni(COD)2] and PPh3 with the beta-keto phosphorus ylides 12 or 8-10, respectively, and characterized by 1H and 31P{1H} NMR spectroscopy. NMR studies and the crystal structure determination of 13 indicated an interaction between the hydrogen atom of the C-H group alpha to phosphorus and the ether function. The complexes [NiPh{Ph2PCHC(O)Ph}(Py)] 18, [NiPh{Ph(t-Bu)PCHC(O)Ph}(Py)] 19, [NiPh{(n-Bu)2PCH...C(...O)Ph}(Py)] 20, [NiPh{Ph(n-Bu)PCH...C(...O)Ph}(Py)] 21 and [NiPh{Me2PCH...C(...O)Ph}(Py)] 22 have been isolated from the reactions of [Ni(COD)2] and an excess of pyridine with the -keto phosphorus ylides Ph3PCH=C(O)Ph 3 or 8-11, respectively, and characterized by 1H and 31P{1H} NMR spectroscopy. Ligands 3, 8, 10 and 12 have been used to prepare in situ oligomerization catalysts by reaction with one equiv. of [Ni(COD)2] and PPh3 under an ethylene pressure of 30 or 60 bar. The catalyst prepared in situ from 12, [Ni(COD)2] and PPh3 was the most active of the series with a TON of 12700 mol C2H4 (mol Ni)-1 under 30 bar ethylene. When the beta-keto phosphorus ylide 8 was reacted in situ with three equiv. of [Ni(COD)2] and one equiv. of PPh3 under 30 bar of ethylene, ethylene polymerization was observed with a TON of 5500 mol C2H4 (mol Ni)-1.     

Lanthanide-potassium wheels

Mixed potassium-lanthanide wheel-shaped-structured, hexanuclear coordination oligomers of composition [(eta5-C5H5)Ln(NPh2)2{N(PPh2)2}2K2(THF)4]2 (Ln = Er (1a), Yb (1b)) and an octanuclear coordination polymer of composition [(eta5-C5H5)Sm(NPh2)2{N(PPh2)2}K]infinity (2) were synthesized. All presented compounds can be obtained in moderate yields in a one-pot procedure, in which the potassium salts KNPh2 and [K(THF)(n)N(PPh2)2] as well as NaC5H5 are reacted with anhydrous samarium, erbium, and ytterbium trichloride in THF.     

Synthesis, structures and reactions of lithium complexes of [(o-RCHC6H4)PPh2=NSiMe3]-(R = H, SiMe3) ligands

N-Trimethylsilyl o-methylphenyldiphenylphosphinimine, (o-MeC6H4)PPh2=NSiMe3 (1), was prepared by reaction of Ph2P(Br)=NSiMe3 with o-methylphenyllithium. Treatment of 1 with LiBun and then Me3SiCl afforded (o-Me3SiCH2C6H4)PPh2=NSiMe3 (2). Lithiations of both 1 and 2 with LiBu(n) in the presence of tmen gave crystalline lithium complexes [Li{CH(R)C6H4(PPh(2=NSiMe3)-.tmen](3, R = H; 4, R = SiMe3). From the mother liquor of 4, traces of the tmen-bridged complex [Li{CH(SiMe3)C6H4(PPh2=NSiMe3)-2}]2(mu-tmen) (5) were obtained. Reaction of 2 with LiBun in Et2O yielded complex [Li{CH(SiMe3)C6H4(PPh2=NSiMe3)-2}.OEt2] (6). Reaction of lithiated with Me2SiCl2 in a 2:1 molar ratio afforded dimethylsilyl-bridged compound Me2Si[CH2C6H4(PPh2=NSiMe3)-2]2 (7). Lithiation of 7 with two equivalents of LiBun in Et2O yielded [Li2{(CHC6H4(PPh2=NSiMe3)-2)2SiMe2}.0.5OEt2](8.0.5OEt2). Treatment of 4 with PhCN formed a lithium enamide complex [Li{N(SiMe3)C(Ph)CHC6H4(PPh2=NSiMe3)-2}.tmen] (9). Reaction of two equivalents of 5 with 1,4-dicyanobenzene gave a dilithium complex [{Li(OEt2)2}2(1,4-{C(N(SiMe3)CHC6H4(PPh2=NSiMe3)-2}2C6H4)] (10). All compounds were characterised by NMR spectroscopy and elemental analyses. The structures of compounds 2, 3, 5, 6 and 9 have been determined by single crystal X-ray diffraction techniques.     

New heterobimetallic and polymeric selenocarboxylates derived from [M(SeC{O}Ph)4]- (M = Ga and In) as molecular precursors for ternary selenides

(Et3NH)[In(SeC{O}Ph)4].H2O (1) along with heterobimetallic and polymeric metal selenocarboxylates, namely [NaGa(SeC{O}Ph)4] (2), [K(MeCN)2Ga(SeC{O}Ph)4] (3), [NaIn(SeC{O}Ph)4] (4), [K(MeCN)2In(SeC{O}Ph)4] (5), [(Ph3P)2CuIn(SeC{O}Ph)4].CH2Cl2 (6), and [(Ph3P)2AgIn(SeC{O}Ph)4].CH2Cl2 (7), have been synthesized by incorporating either alkali metal ions (Na+ and K+) or group 11 metal ions (Cu(I) and Ag(I)) into the [M(SeC{O}Ph)4]- anion. Crystal structures determined by X-ray crystallography indicate that 3 and 5 have one-dimensional coordination polymeric structures while 6 and 7 have an M(mu-Se)2In (M = Cu, Ag) core. The thermal decomposition of these compounds except 4 lead to the formation of the corresponding metal selenides as confirmed by thermogravimetric analysis and in some cases by powder X-ray diffraction studies.     

Regioselective nucleophilic addition of triphenylphosphine to the nitrosylruthenium alkynyl complexes having a hydrotris(pyrazol-1-yl)borate: formation of phosphonio-alkenyl, alkynyl, and allenyl species

A nitrosylruthenium alkynyl complex of TpRuCl(C[triple bond]CPh)(NO)(1a) was reacted with PPh3 in the presence of HBF4.Et2O at room temperature to give a beta-phosphonio-alkenyl complex (E)-[TpRuCl{CH=C(PPh3)Ph}(NO)]BF4(2.BF4). On the other hand, for gamma-hydroxyalkynyl complexes TpRuCl{C[triple bond]CC(R)2OH}(NO)(R = Me (1b), Ph (1c), H (1d)), similar treatments with PPh3 were found to give gamma-phosphonio-alkynyl [TpRuCl{C[triple bond]CC(Me)2PPh3}(NO)]BF4(3.BF4),alpha-phosphonio-allenyl [TpRuCl{C(PPh3)=C=CPh2}(NO)]BF4(4.BF4), and a novel product of gamma-hydroxy-beta-phosphonio-alkenyl (E)-[TpRuCl{CH=C(PPh3)CH2OH}(NO)]BF4(5.BF4), respectively. Dominant factors for the selectivity in affording 3-5 were associated with the steric congestion and electronic properties at the gamma-carbons, along with those around the metal fragment. From the bis(alkynyl) complex TpRu(C[triple bond]CPh)2(NO)6, a bis(beta-phosphonio-alkenyl)(E,E)-[TpRu{CH=C(PPh3)Ph}2(NO)](BF4)2{7.(BF4)2} was produced at room temperature. However, similar reactions at 0 degrees C gave an alkynyl beta-phosphonio-alkenyl complex (E)-[TpRu(C[triple bondCPh){CH=C(PPh3)Ph}(NO)]BF4(8.BF4) as a sole product, of which additional hydration in the presence of HBF4.Et2O afforded a [small beta]-phosphonio-alkenyl ketonyl (E)-[TpRu{CH2C(O)Ph}{CH=C(PPh3)Ph}(NO)]BF(.9BF4). Five complexes, 2-5 and 7 were crystallographically characterized.     

Generation and reactions of ruthenium phosphido complexes [(eta5-C5H5)Ru(PR'3)2(PR2)]: remarkably high phosphorus basicities and applications as ligands for palladium-catalyzed Suzuki cross-coupling reactions

Reactions of [(eta5-C5H5)Ru(PR'3)2(Cl)] with NaBAr(F) [BAr(F)-=B{3,5-[C6H3(CF3)2]}4-; PR'3=PEt3 or 1/2Et2PCH2CH2PEt2) (depe)] and PR2H (R=Ph, a; tBu, b; Cy, c) in C6H5F, or of related cationic Ru(N2) complexes with PR2H in C6H5F, gave the secondary phosphine complexes [(eta5-C5H5)Ru(PR'3)2(PR2H)]+ BAr(F)- (PR'3=PEt3, 3 a-c; 1/2depe, 4 a,b) in 65-91 % yields. Additions of tBuOK (3 a, 4 a; [D6]acetone) or NaN(SiMe3)2 (3 b,c, 4 b; [D8]THF) gave the title complexes [(eta5-C5H5)Ru(PEt3)2(PR2)] (5 a-c) and [(eta5-C5H5)Ru(depe)(PR2)] (6 a,b) in high spectroscopic yields. These complexes were rapidly oxidized in air; with 5 a, [(eta5-C5H5)Ru(PEt3)2{P(=O)Ph2}] was isolated (>99 %). The reaction of 5 a and elemental selenium yielded [(eta5-C5H5)Ru(PEt3)2{P(=Se)Ph2}] (70 %); selenides from 5 c and 6 a were characterized in situ. Competitive deprotonation reactions showed that 5 a is more basic than the rhenium analog [(eta5-C5H5)Re(NO)(PPh3)(PPh2)], and that 6 b is more basic than PtBu3 and P(iPrNCH2CH2)3N. The latter is one of the most basic trivalent phosphorus compounds [pK(a)(acetonitrile) 33.6]. Complexes 5 a-c and 6 b are effective ligands for Pd(OAc)2-catalyzed Suzuki coupling reactions: 6 b gave a catalyst nearly as active as the benchmark organophosphine PtBu3; 5 a, with a less bulky and electron-rich PR2 moiety, gave a less active catalyst. The reaction of 5 a and [(eta3-C3H5)Pd(NCPh)2]+ BF4- gave the bridging phosphido complex [(eta5-C5H5)Ru(PEt3)2(PPh2)Pd(NCPh)(eta3-C3H5)]+ BAr(F)- in approximately 90 % purity. The crystal structure of 4 a is described, as well as substitution reactions of 3 b and 4 b.     

Alkaline earth metal complexes of a phosphine-borane-stabilized carbanion: synthesis, structures, and stabilities

The reaction between either MgI2 or CaI2 and 2 equiv of [(Me3Si)2{Me2(H3B)P}C]K (2) in toluene gives the corresponding organo-alkaline earth metal compounds [(Me3Si)2{Me2(H3B)P}C]2M in moderate to good yields [M = Mg (3), Ca (4)]. Compound 3 crystallizes solvent-free, whereas X-ray quality crystals of 4 could not be obtained in the absence of coordinating solvents; crystallization of 4 from cold methylcyclohexane/THF gives the solvate [(Me3Si)2{Me2(H3B)P}C]2Ca(THF)4 (4a). The corresponding heavier alkaline earth metal complexes [(Me3Si)2{Me2(H3B)P}C]2M(THF)5 [M = Sr (7), Ba (8)] are obtained from the reaction between MI2 and 2 equiv of 2 in THF, followed by recrystallization from cold methylcyclohexane/THF. Compound 3 degrades over a period of several weeks at room-temperature both in the solid state and in toluene solution to give the free phosphine-borane (Me3Si)2{Me2(H3B)P}CH (5) as the sole phosphorus-containing product. In addition, compounds 3, 4, and 4a react rapidly with THF in toluene solution, yielding 5 as the sole phosphorus-containing product; in contrast, compounds 7 and 8 are stable toward this solvent.     

Dinitrosyl iron complexes (DNICs) containing S/N/O ligation: transformation of Roussin's red ester into the neutral {Fe(NO)2}10 DNICs

Addition of the Lewis base [OPh]- to the THF solution of Roussin's red ester [Fe(mu-SC6H4-o-NHCOPh)(NO)2]2 (1) and [Fe(mu-SC6H4-o-COOH)(NO)2]2 (2), respectively, yielded the EPR-active, anionic {Fe(NO)2}9, [(SC6H4-o-NCOPh)Fe(NO)2]- (3) with the anionic [SC6H4-o-NCOPh]2- ligand bound to the {Fe(NO)2} core in a bidentate manner (S,N-bonded) and [(SC6H4-o-COO)Fe(NO)2]- (4) with the anionic [SC6H4-o-COO]2- ligand bound to the {Fe(NO)2} core in a bidentate manner (S,O-bonded), characterized by IR, UV-vis, EPR, and single-crystal X-ray diffraction. In contrast to the bridged-thiolate cleavage yielding the neutral {Fe(NO)2}9, [(SC6H4-o-NHCOPh)(Im)Fe(NO)2] (Im=imidazole), by addition of 2 equiv of imidazole to complex 1 observed in the previous study, the addition of the stronger sigma-donating and pi-accepting PPh3 ligand triggered the reductive elimination of bridged thiolates of complex 1 to yield the neutral {Fe(NO)2}10, [(PPh3)2Fe(NO)2]. These results unambiguously illustrate one aspect of how the nucleophile L (L=imidazole, PPh3, [OPh]-) functions to control the reaction pathways (bridged-thiolate cleavage, reductive elimination, and deprotonation) upon the reaction of complex 1 and the nucleophile L. The EPR-active, dimeric {Fe(NO)2}9 dinitrosyl iron complex (DNIC) [Fe(mu-SC7H4SN)(NO)2]2 (6), with S and N atoms of the anionic [-SC7H4SN-]- (2-benzothiozolyl thiolate) ligands bound to two separate {Fe(NO)2}9 cores, was also synthesized from reaction of bis(2-benzothiozolyl) disulfide and [(NO)2Fe(PPh3)2]. A straightforward reaction of complex 6 and 4 equiv of [N3]- conducted in THF led to the anionic {Fe(NO)2}9, [(N3)2Fe(NO)2]- (7). Conclusively, the EPR-active, {Fe(NO)2}9 DNICs can be classified into the anionic {Fe(NO)2}9 DNICs with S/N/O ligation, the neutral {Fe(NO)2}9 DNIC with one thiolate and one neutral imidazole ligation, and the cationic {Fe(NO)2}9 DNICs with the neutral N-/P-containing coordinated ligands.     

Nitrile-amidine coupling at Pt(IV) and Pt(II) centers. An easy entry to imidoylamidine complexes

Treatment of trans-[PtCl4(RCN)2] (R = Me, Et, Ph, NEt2) with 2 equiv of the amidine PhC(=NH)NHPh in a suspension of MeCN (R = Me), CHCl3 (R = Et, Ph), or in CHCl3 solution (R = NEt2) results in the formation of the imidoylamidine complexes trans-[PtCl4{NH=C(R)N=C(Ph)NHPh}2] (1-4) isolated in good yields (66-84%). The reaction of soluble complexes 3 and 4 with 2 equiv of Ph3P=CHCO2Me in CH2Cl2 (40 degrees C, 5 h) leads to dehydrochlorination resulting in a chelate ring closure to furnish the platinum(IV) chelates [PtCl2{NH=C(R)NC(Ph)=NPh}2] (R = Ph, 5; R = NEt2, 6), accordingly, and the phosphonium salt [Ph3PCH2CO2Me]Cl. Treatment of 5 with 3 equiv of Ph3P=CHCO2Me at 50 degrees C for 5 d resulted in only a 30% conversion to the corresponding Pt(II) complex [Pt{NH=C(NEt2)NC(Ph)=NPh}2] (15). The reduction can be achieved within several minutes, when Ph2PCH2CH2PPh2 in CDCl3 is used. When the platinum(II) complex trans-[PtCl2(RCN)2] is reacted with 2 equiv of the amidine, the imidoylamidinato complexes [PtCl(RCN){NH=C(R)NC(Ph)=NHPh}] (8-11) and [PhC(=NH)NHPh] x HCl (7) are formed. The reaction of trans-[PtCl2(RCN)2] with 4 equiv of the amidine under a prolonged reaction time or treatment of [PtCl(RCN){NH=C(R)NC(Ph)=NHPh}] (8-11) with 2 more equiv of the amidine yields the complex bearing two chelate rings [Pt{NH=C(R)NC(Ph)=NHPh}2] (12-15). The treatment of cis-[PtCl2(RCN)2] (R = Me, Et) with the amidine gives ca. 50-60% yield of [PtCl2{NH=C(R)NHC(Ph)=NHPh}] (16 and 17). All of the platinum compounds were characterized by elemental analyses; FAB mass spectrometry; IR spectroscopy; 1H, 13C{1H}, and 195Pt NMR spectroscopies, and four of them (4, 6, 8, and 15) were also characterized by X-ray crystallography. The coupling of the Pt-bound nitriles and the amidine is metal-mediated insofar as RCN and PhC(=NH)NHPh do not react in the absence of the metal centers in conditions more drastic than those of the observed reactions. The nitrile-amidine coupling reported in this work constitutes a route to the synthesis of imidoylamidine complexes, some of them exhibiting luminescent properties.     

The first examples of metal-mediated addition of a phosphorus imine to nitriles; the preparation and X-ray crystal structures of [PtCl4{NH=C(Et)N=PPh3}2] and [PtCl2(EtCN){NH=C(Et)N[double bond, length as m-dash]PPh3}

Imino(triphenyl)phosphorane, Ph3P=NH (1), reacts with nitrile complexes of Pt(IV) to generate hydrolytically sensitive [PtCl4{NH=C(R)N=PPh3}2](R=Me 2a, Et 2b, Ph 2c), and with the Pt(II) complex [PtCl2(EtCN)2] to give [PtCl2(EtCN){NH=C(Et)N=PPh3}](3) and [PtCl2{NH=C(Et)N=PPh3}2](4); X-ray crystallography performed upon (2b) and (3) confirms the presence of an imine/nitrile addition ligand bound by the terminal nitrogen.     

Lanthanide-transition metal carbonyl complexes: condensation of solvent-separated ion-pair compounds into extended structures

New solvent-separated ion-pair compounds and extended structures containing ytterbium(II)-transition metal isocarbonyl linkages were synthesized. [Yb(THF)6][M(CO)5]2 (1, M = Mn; 2, M = Re) were prepared via transmetalation reactions between Yb metal and Hg[M(CO)5]2 in THF. Reflux of 1 in Et2O afforded {Yb(THF)2(Et2O)2[(mu-CO)2Mn(CO)3]2}infinity (3) which is a sheet-layer structure. In ether solution, 3 is converted to {Yb(THF)4[(mu-CO)2Mn(CO)3]2}infinity (4) which has a linear structure. In both 3 and 4, ytterbium is 8-coordinated (distorted square antiprism geometry), four coordination sites occupied by molecules of solvent and four more by oxygen atoms of isocarbonyl linkages. The [Mn(CO)5]- anion has trigonal bipyramidal geometry and is linked to ytterbium through two equatorial carbonyls. The formation of two minor products, (THF)2Mn3(CO)10 (5) and [(THF)5Yb(mu-CO)Mn3(CO)13][Mn3(CO)14] (6), was observed during condensation of 1 into 3 and 4.     

Chelate and pincer carbene complexes of rhodium and platinum derived from hexaphenylcarbodiphosphorane, Ph3P=C=PPh3

The reaction of [(cod)RhCl]2 with Ph3P=C=PPh3 (1) gave the bidentate Rh(I) carbene complex, (cod)Rh[eta2-C{P(C6H4)Ph2}{PPh3}] (2), in which one of the Ph groups in 1 underwent orthometalation to form the chelate. Displacement of cod by 2 equiv of PMe3 transformed 2, via a second orthometalation event, into the Rh(III) C,C,C pincer carbene complex, HRh(PMe3)2[eta3-C{P(C6H4)Ph2}2] (3). The reaction of [Me2Pt(SMe2)]2 with 1 led directly to the analogous C,C,C pincer carbene complex of Pt(II), (Me2S)Pt[eta3-C{P(C6H4)Ph2}2] (4). DFT calculations on a model form of 3 suggest a net single sigma-bonding interaction between Rh and an sp2-hybridized carbene center, with a HOMO that is predominantly carbene pz in character.     

NMR studies on the novel heterobimetallic complexes [M(dppm)(Ph(2)PCH(2)PPh(2)PPPP) {Pt(PPh3)2}]OTf (M = Rh, Ir) derived from the stepwise activation of white phosphorus

The solution structures of the novel heterobimetallic complexes [Ir(dppm)(Ph(2)PCH(2)PPh(2)PPPP){Pt(PPh(3))2}]OTf and [Rh(dppm)(Ph(2)PCH(2)PPh(2)PPPP){Pt(PPh(3))(2)}]OTf derived from the reaction of Rh and Ir--P(5) precursors with [Pt(C2H4)(PPh3)2] have been unambiguously assigned on the basis of 1H NMR and 31P{1H} NMR data. The results are in agreement with the regio-selective insertion of the {Pt(PPh3)2} moiety resulting in a new pentaphosphorus topology which agrees with the formal formation of a unique phosphonium(+)-tetraphosphabutadienide(2-) ligand.     

Synthesis, structure, and computational studies of the tetrameric magnesium imides [2,4,6-Cl3C6H2NMg.S]4 (S=1,4-dioxane and tetrahydrofuran)

The magnesium imide complexes [(ArNMg.diox)4.3(diox)] (4) and [(ArNMg.THF)4.tol] (5) (where Ar=2,4,6-Cl3C6H2, diox=1,4-dioxane, and THF=tetrahydrofuran) were prepared by the equimolar reaction of Bu2Mg with the primary amine in suitable solvent mixtures. The successful synthesis of the halide-substituted imides is notable because similar reactions with the less acidic organo-substituted anilines cease upon monodeprotonation. Both 4 and 5 form unusual Mg4N4 cubane aggregates in the solid state. Computational studies (HF/6-31G*) indicate that a combination of sterics and metal solvation determines the aggregation state adopted.     

Synthesis, characterisation and molecular structure of Re(III) 2-oxacyclocarbenes stabilised by a benzoyldiazenido ligand

A family of new Fischer-type rhenium(III) benzoyldiazenido-2-oxacyclocarbenes of formula [(ReCl2[eta1-N2C(O)Ph][=C(CH2)nCH(R)O](PPh3)2][n = 2, R = H (2), R = Me (3); n = 3, R = H (4), R = Me (5)] have been prepared by reaction of [ReCl2[eta2-N2C(Ph)O](PPh3)2] (1) with omega-alkynols, such as 3-butyn-1-ol, 4-pentyn-1-ol, 4-pentyn-2-ol, 5-hexyn-2-ol in refluxing THF. The correct formulation of the carbene derivatives 2-5 has been unambiguously determined in solution by NMR analysis and confirmed for compounds 2-4 by X-ray diffraction methods in the solid state. All complexes are octahedral with the benzoyldiazenido ligand, Re[N2C(O)Ph], adopting a "single bent" conformation. The coordination basal plane is completed by an oxacyclocarbene ligand and two chlorine atoms. Two triphenylphosphines in trans positions with respect to each other complete the octahedral geometry around rhenium. The reactivity of 1 towards different alkynes and alkenes including propargyl- and allylamine has been also studied. With propargyl amine, monosubstituted or bisubstituted complexes, [(ReCl2[eta1-N2C(O)Ph][eta1-NH2CH2C triple bond CH]n(PPh3)(3-n)][n= 1 (6); n = 2 (7)], have been isolated depending on the reaction conditions. In contrast, the reaction with allylamine gave only the disubstituted complex [(ReCl2[eta1-N2C(O)Ph][eta1-NH2CH2CH=CH2]2(PPh3)] (8). The molecular structure of the monosubstituted adduct has been confirmed by X-ray analysis in the solid state.     

Preparation and reactivity of penta- and tetracoordinate platinum(II) hydride complexes with P(OEt)3 and PPh(OEt)2 phosphite ligands

The pentacoordinate [PtH{P(OEt)3}4]BF4 (1) hydride complex was prepared by allowing the tetrakis(phosphite) Pt{P(OEt)3}4 to react with HBF4.Et2O at -80 degrees C. Depending on the nature of the acid used, however, the protonation of the related Pt{PPh(OEt)2}4 complex yielded the pentacoordinate [PtH{PPh(OEt)2}4]BF4 (3) or the tetracoordinate [PtH{PPh(OEt)2}3]Y (4) [Y = BF4- (a), CF3SO3- (b), Cl- (c)] derivatives. Neutral PtHClP2 (7,8) [P = P(OEt)3, PPh(OEt)2] hydride complexes were prepared by allowing PtCl2P2 to react with NaBH4 in CH3CN. The tetrakis(phosphite)[Pt{P(OEt)3}4](BF4)2 (2) derivative was also synthesised and then characterised spectroscopically and by an X-ray crystal structure determination. Reactivity with aryldiazonium cations of all the hydrides was investigated and found to proceed only with the PtHClP2 complex to yield the aryldiazene [PtCl(ArN=NH)P2]BF4[P = PPh(OEt)2] derivative. The hydrazine [PtCl(NH2NH2){PPh(OEt)2}2]BPh4 complex was also prepared by allowing PtHClP2 to react first with AgCF3SO3 and then with hydrazine.     

Interactions of Rh(III)-dihydrido-bis(phosphine) complexes with semicarbazones

Interaction of cis,trans,cis-[Rh(H)2(PR3)2(acetone)2]PF6 complexes (R = aryl or R3 = Ph2Me, Ph2Et) under H2 with E-semicarbazones gives the Rh(III)-dihydrido-bis(phosphine)-semicarbazone species cis,trans-[Rh(H)2(PR3)2{R'(R' ')C=N-N(H)CONH2}]PF6, where R' and R' ' are Ph, Et, or Me. The complexes are generally characterized by elemental analysis, 31P{1H} NMR, 1H NMR, and IR spectroscopies, and MS. X-ray analysis of three PPh3 complexes reveals chelation of E-semicarbazones by the imine-N atom and the carbonyl-O atom. In contrast, the corresponding reaction of [Rh(H)2(PPhMe2)2(acetone)2]PF6 with acetophenone semicarbazone gives the ortho-metalated-semicarbazone species cis-[RhH(PPhMe2)2{o-C6H4(Me)C=N-N(H)CONH2}]PF6. The X-ray structure of E-propiophenone semicarbazone is also reported. Rhodium-catalyzed, homogeneous hydrogenation of semicarbazones was not observed even at 40 atm H2.     

Bis(2-diphenylphosphinoxynaphthalen-1-yl)methane: transition metal chemistry, Suzuki cross-coupling reactions and homogeneous hydrogenation of olefins

Transition metal complexes of bis(2-diphenylphosphinoxynaphthalen-1-yl)methane (1) are described. Bis(phosphinite) 1 reacts with Group 6 metal carbonyls, [Rh(CO)2Cl]2, anhydrous NiCl2, [Pd(C3H5)Cl]2/AgBF4 and Pt(COD)I2 to give the corresponding 10-membered chelate complexes 2, 3 and 5-8. Reaction of 1 with [Rh(COD)Cl]2 in the presence of AgBF4 affords a cationic complex, [Rh(COD){Ph2P(-OC10H6)(mu-CH2)(C10H6O-)PPh2-kappaP,kappaP}]BF4 (4). Treatment of 1 with AuCl(SMe2) gives mononuclear chelate complex, [(AuCl){Ph2P(-OC10H6)(mu-CH2)(C10H6O-)PPh2-kappaP,kappaP}] (9) as well as a binuclear complex, [Au(Cl){mu-Ph2P(-OC10H6)(mu-CH2)(C10H6O-)PPh2-kappaP,kappaP}AuCl] (10) with ligand 1 exhibiting both chelating and bridged bidentate modes of coordination respectively. The molecular structures of 2, 6, 7, 9 and 10 are determined by X-ray studies. The mixture of Pd(OAc)2 and effectively catalyzes Suzuki cross-coupling reactions of a range of aryl halides with aryl boronic acid in MeOH at room temperature or at 60 degrees C, giving generally high yields even under low catalytic loads. The cationic rhodium(I) complex, [Rh(COD){Ph2P(-OC10H6)(mu-CH2)(C10H6O-)PPh2-kappaP,kappaP}]BF4 (4) catalyzes the hydrogenation of styrenes to afford the corresponding alkyl benzenes in THF at room temperature or at 70 degrees C with excellent turnover frequencies.