Transients of the Current and Open-Circuit Potential Occurring during the Carbon Monoxide Adsorption on a Rhodium Electrode

Transients of the current and open-circuit potential are measured after bringing carbon monoxide in contact with an Rh/Pt electrode in 0.5 M H₂SO₄ and 1 M HCl solutions. To interpret these transients from positions of theoretical views on the transients of the current and open-circuit potential that were developed previously for the adsorption of neutral species on a hydrogen electrode, curves of dependences of the total electrode charge on the electrode potential are plotted in the presence and absence of chemisorbed CO on the surface. Good agreement of theory with experiment is established. In 1 M H₂SO₄, values of the potential of a zero total charge (PZTC) in the absence and presence of CO_ads and values of the reverse potential happen to be close, whereas the PZTC in 1 M HCl perceptibly shifts in the positive direction as a result of the CO adsorption, while the reverse potential, conversely, falls in the region of potentials of hydrogen evolution on Rh. As a result of the latter, in 1 M HCl, throughout the entire range of potentials where restrictions of the employed modeling notions are obeyed, in accordance with theory, integrated values of the current transients have only a negative sign, and those of the open-circuit potential transients have only a positive sign.     

Variations in the Charge and Open-Circuit Potential of a Platinum Electrode during Adsorption of Iodine and Iodide Ions

The adsorption of iodine and iodide anions on a Pt/Pt electrode (0.5 M H₂SO₄ as a supporting solution) is compared using potentiodynamic and galvanostatic charging curves, transients of the current and open-circuit potential (OCP), and analytical measurements. Variations in the charge and OCP during the adsorption obey relationships derived for strong adsorption of neutral species and ions on a hydrogen electrode with the formation of irreversibly adsorbed atoms. The main product of the I₂ and I^– chemisorption in acid solutions is adsorbed iodine atoms. However, adsorption of iodine occurs in noticeable amounts and above a monolayer in the form of species that undergo electrodesorption during a cathodic polarization to potentials of the beginning of hydrogen adsorption. In the presence of a monolayer of adsorbed iodine atoms, potential of the zero total charge of a Pt/Pt electrode is in the oxygen adsorption region.     

Variations in the Overall Charge and Open-Circuit Potential of a Palladium Electrode during the Adsorption of Iodine and Iodide Anions

Transients of the current and the open-circuit potential during the adsorption of I^– and I₂ on Pd/Pt (supporting electrolyte 0.5 M H₂SO₄) are measured and so are potentiodynamic and galvanostatic charging curves, in the presence and absence of adlayers. Dependences of the overall electrode charge on potential are constructed. After the adsorption of both I^– and I₂, values of the electrode surface charges at potentials of the double-layer region turn negative and considerably differ in their magnitude. The latter is connected with different character of adlayers, which is shown by experiments on the adsorption of silver atoms at underpotentials after a preliminary adsorption of I^– and I₂ on the electrode surface. Certain discrepancies between experimentally-found and theoretically-expected values of transients are attributed to a substantial increase in the irreversibility of sorption and desorption of hydrogen and oxygen in the presence of iodine atoms adsorbed on the surface.     

Determining Magnitude of the Carbon Monoxide Adsorption on Electrodes of Platinum Metals

The possibility of using current transients and open-circuit potential for correctly calculating a double-layer correction for charges spent for electrooxidation of adsorbed carbon monoxide is considered. On the basis of electrochemical measurements of adsorption of CO on electrolytic deposits of Pt and Rh in solutions of H₂SO₄, H₂SO₄ + HCl, and HCl, an estimate of the magnitude of adsorption of CO is performed with allowance made for a correct double-layer correction. The obtained values are compared with similar literature data for smooth Pt and Rh, and possible reasons for the established differences are discussed.     

Adsorption of CO on Ru and Pt blacks and catalysts and the possibility of its utilization for the determination of the ruthenium-free surface

Electrochemical voltammetric curves on Ru and Pt blacks of a different surface area were measured in potential intervals 0.05–1.05 V in pure 0.5 M H₂SO₄ and after CO adsorption. It was proved that after the CO adsorption, the outset of ruthenium oxidation is shifted by about 150 mV towards the positive potentials, e.g. to the region of oxidation of adsorbed CO. This fact made possible the determination of a double-layer charging current of Ru electrodes and, subsequently, also the determination of the amount of adsorbed hydrogen on the Ru surface. An evaluation of the amount of CO and hydrogen adsorption showed that the ratio of adsorbed CO:H on the Pt surface was about 1:1, while on Ru electrodes this ratio was around twice as large. The amount of hydrogen adsorbed on Ru blacks depends on the preliminary preparation of the electrodes. The CO adsorption could also be employed in the determination of a charging current of electrode double-layers during voltammetric oxidation of adsorbed hydrogen on ruthenium supported on Al₂O₃, SiO₂, or TiO₂ carriers. However, a similar determination of hydrogen adsorbed on the tin-modified Ru catalysts is not very reliable.     

Transient Currents of Carbon Monoxide and Methanol Adsorption on Platinum Electrodes and Determination of Composition of Chemisorption Layers

Transients of currents during the adsorption of CO on polycrystalline (pc) Pt in solutions of H₂SO₄ and H₂SO₄ + HCl are measured at a constant potential. The obtained values are compared with relevant reference data for Pt electrodes. Possible reasons for the established differences are discussed. Transient currents for the methanol adsorption on pcPt and Pt/Pt are compared. A method for correct determination of the composition of a chemisorption layer, which forms during dissociative adsorption of simple organic compounds of the type of RH _m , is considered. Experimental data on the methanol adsorption suggest that adsorption products on pcPt are chiefly species of CO. On Pt/Pt, at low potentials, in addition to CO one should assume the adsorption of species of HCO in perceptible amounts.     

High performance gold-supported platinum electrocatalyst for oxygen reduction

High performance gold-supported Pt electrocatalyst for the reduction of oxygen was prepared by replacing Cu adlayers, deposited potentiostatically on Au, with Pt at open-circuit potential in a 0.1 M HCl solution containing K₂PtCl₆. Auger Electron Spectroscopy and Atomic Force Microscopy reveal the surface modification. The kinetics of oxygen reduction on this platinum modified electrode was studied by the rotating-disc electrode technique. The activity of the electrode is lower than the activity of a smooth Pt electrode in the negative potential scan, but it is significantly higher in the positive scan.     

Adsorption of Carbon Monoxide on Platinized Platinum Electrode with Preadsorbed Iodine and Iodide Anions

Adsorption of carbon monoxide in the presence of adlayers formed upon exposure of Pt/Pt to I^– anions and I₂ (0.5 M ₂SO₄ as the supporting electrolyte) is studied using the method of electrode washing. Transients of current and potentiodynamic curves show that the displacement of iodine adatoms from the Pt/Pt surface by CO is virtually complete when CO is adsorbed in the range of hydrogen adsorption potentials (E 0.35 V (RHE)) and incomplete at higher potentials. It is concluded that the bond formed by iodine adatoms with the surface strengthens with an increase in the potential. Possible reasons for the striking difference in the behavior of adatomic monolayers formed from KI and I₂ solutions is discussed. The surface charge of Pt/Pt is observed to drastically change as a result of the displacement of iodine adatoms by carbon monoxide.     

Variations of the charge and open-circuit potential during the ion adsorption with the formation of irreversibly adsorbed atoms

The transients of the current and open-circuit potential (OCP) for the B^z± ± ze → B_ad process, where B_ad is an irreversibly adsorbed atom, are described analytically. The analysis is based on the earlier obtained relationships for variations in the total charge and OCP of a hydrogen electrode during the irreversible adsorption of neutral species. A graphic method of estimating the OCP shifts and integral current transients (E^ads = const) corresponding to various surface coverages with B_ad is proposed. Dedicated to the ninetieth anniversary of Ya.M. Kolotyrkin’s birth.     

Effect of the nanostructure on the CO poisoning rate of platinum

Platinum was electrochemically deposited in the forms of nanowires and nanotubes and compared to Pt black and Pt wire electrodes. The resistance to CO poisoning was measured in CO saturated solution by recording the current decrease in the H adsorption/desorption region through continuous sweeping of the electrode potential between 0.00 and 0.45 V vs RHE. For Pt deposits prepared with the same deposition charge, it is shown that the maximum coverage of CO, θ_CO,max, decreases as one goes from Pt black, to nanowires and to nanotubes. In the case of the longest nanotube prepared, θ_CO,max is as low as 0.44.     

Transients of the Open-Circuit Potential Observed during the Interaction of Formic Acid with Preliminarily Adsorbed Oxygen on a Platinized Platinum Electrode

Transients of the open-circuit potential, which are observed during the interaction of formic acid with preliminarily adsorbed oxygen (O_ads) on a Pt/Pt electrode in 0.5 M H₂SO₄, are measured. It is established, by means of the method of cathodic potentiodynamic pulses, that the slowest interaction of formic acid with O_ads occurs in the region of large coverages of the electrode surface by oxygen (θ_O ∼1–0.8). A presumption is put forward that the process rate in this region is defined by a direct reaction of O_ads with molecules of formic acid from the bulk solution. It is shown that the interaction of formic acid with O_ads in the region of intermediate coverages (θ_O ∼ 0.8–0.2) proceeds via a mechanism of “conjugated reactions.” Transients of the open-circuit potential for formic acid are compared to transients for carbon monoxide obtained in analogous conditions. The substantially shorter overall time of potential decay in the case of CO (at the same concentrations) is caused by a faster reaction of CO with adsorbed oxygen in the region of large θ_O. The difference is explained by assuming that the HCOOH adsorption as opposed to CO bears a dissociative character.__________Translated from Elektrokhimiya, Vol. 41, No. 8, 2005, pp. 936–942.Original Russian Text Copyright © 2005 by Manzhos, Maksimov, Podlovchenko.     

Positive shift of the potential of zero total charge of stepped Pt(1 1 1) electrodes decorated by irreversibly adsorbed bismuth

The value of the potential of zero total charge (pztc) of stepped Pt(1 1 1) electrodes, whose step sites have been blocked by irreversibly adsorbed bismuth, has been determined by means of the CO displacement experiment. It has been observed that the pztc of the decorated surfaces shift positively with respect to that of the substrate stepped surface electrode. In this way the electrode total charge at constant potential diminishes by effect of the adatom adsorption. The oxidation of adsorbed CO takes place at higher potentials on the decorated surfaces, pointing out a direct effect of the pztc shift on their reactivity as electrocatalyzers.     

Adsorption Peculiarities of Carbon Monoxide on Iridium Electrodeposits

The transients of current and open-circuit potential observed at CO adsorption on Ir/Pt electrodes in solutions of sulfuric and hydrochloric acids are shown to adequately agree with those theoretically expected. From voltammetric curves of electrooxidation of chemisorbed CO, the values of its adsorption are estimated by making a proper double-layer correction. It is concluded that CO is preferentially adsorbed in the bridge form. During CO adsorption from sulfuric acid solutions on an electrode with a preliminarily accumulated monolayer of copper adatoms (Cu_ad), small negative current are observed and Cu_ad are displaced by 50%. To explain these results, it is assumed that CO is reduced by copper adatoms.     

Study of the charge displacement at constant potential during CO adsorption on Pt(110) and Pt(111) electrodes in contact with a perchloric acid solution

A new electrochemical approach has been made, employing the current—time transient responses when a CO adlayer is formed at a platinum electrode at various controlled potentials where CO oxidation does not take place. The case of Pt(110) is compared with those of Pt(111) and Pt(111) disordered after ten cycles of oxygen adsorption—desorption. In order to avoid interference with anion-specific adsorption, the study was carried out in a perchloric acid solution. There is good agreement between the charge measured by voltammetry in the absence of CO and the charges measured during the current—time transients. This is indicative that the latter charges are produced by the displacement of the species at the interface as a result of CO adlayer formations. The sign of the current transient has been found to depend on the potential at which CO adsorption is carried out. This dependence may be related to the nature of species which are present in the interfacial region, providing new complementary information that voltammetry cannot yield.     

Spontaneous Bi-modification of polycrystalline Pt electrode: fabrication, characterization, and performance in formic acid electrooxidation

Spontaneous modification of polycrystalline Pt by irreversibly adsorbed bismuth was performed in BiCl₃ solution in concentrated hydrochloric acid under open-circuit conditions. After spontaneous modification, followed by extensive rinsing with water and drying, the surface was characterized using X-ray photoelectron spectroscopy and electrochemistry. Bi-oxy(chloride), oxide species, and metallic Bi were found at a submonolayer coverage on the Pt surface after spontaneous modification. The electrochemical response of Bi-modified polycrystalline Pt electrode in sulfuric acid solution exhibits a complex multi-peak feature, which is resulting in about constant redox charge (Bi species coverage) in the potential region from 0 to 0.9 V (vs. a standard hydrogen electrode). The spontaneously Bi-modified Pt catalyst in model studies exhibits a superior activity towards formic acid oxidation at fuel cell anode relevant potentials. The catalytic effect of bismuth oxy-species is explained in terms of both inhibition of CO_ad formation and oxidation of CO_ad in reaction with Bi-oxy-species.     

表面增强拉曼光谱研究吸附电位对CO在Pt电极上氧化行为的影响

预吸附电势对CO在Pt上的氧化行为有重要影响. 在电势低于0.3 V（vs. RHE）下,预吸附的CO单层在Pt电极上0.4 V就开始氧化,并会在0.6 V左右出现1个较小的氧化峰,即所谓的“氧化前峰”,而在双电层电位区间饱和吸附的CO只有当电势正于0.6 V才氧化     

Potential of zero total charge of platinum single crystals: A local approach to stepped surfaces vicinal to Pt(111)

The electrochemical behavior of platinum single-crystal electrodes is revisited, with special emphasis on the determination of the potential of zero charge. We show that the measure of the charge displaced during CO adsorption allows the determination of the potential of zero total charge (PZTC). The estimation of the potential of zero free charge (PZFC) is discussed, with different degrees of approximation. The application of this methodology to the study of the PZTC of platinum stepped surfaces vicinal to Pt(111) reveals a marked decrease of the PZTC due to the introduction of surface steps. This effect is interpreted as the result of the existence of markedly smaller surface potentials localized on step sites. The importance of considering local aspects of the interface is emphasized with the use of N₂O reduction as a sensitive probe to the local structure of the surface. It is proposed that the different local maxima observed in the absolute value of the reduction current correspond to the local values of PZTC. It is shown that there is, in general, good agreement between the overall PZTC, obtained from the CO displacement, and that calculated from the local values inferred from the N₂O reduction. Further insight is obtained with the application of the laser-induced temperature jump method. This technique is useful to calculate the potential of maximum entropy of the double-layer formation. The resulting value of this potential for Pt(111) is discussed in the light of the PZFC value obtained from different approaches. For stepped surfaces vicinal to Pt(111), two local maxima in the entropy of the double layer are observed that are close to the local PZTC values estimated from the N₂O reduction. This result suggests the existence of cooperative effects in the organization of the water dipoles close to the electrode surface. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 11, pp. 1275–1292. Based on the report delivered at the 8th International Frumkin Symposium “Kinetics of the Electrode Processes,” October 18–22, 2005, Moscow. The text was submitted by the authors in English.     

磷钼酸修饰铂电极的电化学行为及对甲醇氧化的电催化作用

通过循环伏安扫描法制备了PMo₁₂修饰Pt/Pt电极,并研究了该修饰电极在硫酸溶液中的电化学行为。研究结果表明:虽然磷钼酸具有较大的分子尺寸,但在Pt/Pt电极上仍能发生吸附作用,并且由于PMo₁₂在电极上的吸附,降低了Pt/Pt电极上氢区和氧区的荷电量,另外在0.02V左右还观察到磷钼酸的氧化-还原峰。通过稳态极化曲线和循环伏安曲线研究了PMo₁₂修饰Pt/Pt电极对甲醇氧化的电催化作用。测试结果表明:PMo₁₂修饰铂基电极不但对甲醇的电氧化具有较高的活性,而且还有一定的抗CO中毒性。该修饰电极还具有较高的稳定性。     

Anodic film formation on osmium electrodes in strong acid solutions: I. Voltammetric studies

Anodic film formation and reduction on electrodeposited Os was studied in strong HCl and HClO₄ solutions. Significant voltammograms were obtained only after long pre-reduction of the electrode and at slow potential sweeps. The potentiodynamic curves reveal strong adsorption of oxygen with formation of OsO₂ and further oxidation to OsO₄ which goes into solution. In strong HCl solutions a corrosion step at high potential with formation of OsO₂Cl₄^2? is detected. The influence of scan rate on peak potential and current and the charge capacity of the electrode surface was investigated. Anion adsorption and increase in acid concentration was found to reduce the extent of the anodic film. The results are discussed in terms of the formation of thick surface oxides and compared with those for Ir and Ru.     

Electrical Double Layer Structure on Electrodes of Platinum Metals: Effect of the Carbon Monoxide Adsorption

Results on the paper's theme are reviewed. Attention is focused mainly on the use of transients of current and open-circuit potential for elucidating changes in the structure of the electrical double layer (EDL) caused by the CO adsorption. It is shown that the high binding energy of CO with surfaces of platinum metals leads to a strong suppression of the total differential capacitance of the electrode, the recharge of the surface, the displacement of strongly adsorbed atoms formed during the adsorption of ions with a total charge transfer, and to other alterations in the EDL plates facing both solution and metal. The importance of allowing for double-layer effects when solving problems of electrocatalysis on platinum metals is emphasized.