Photodynamic Activity on Biofilm in Endotracheal Tubes of Patients Admitted to an Intensive Care Unit

Ventilator-associated pneumonia (VAP) is an infection that arises after endotracheal intubation affecting patients under intensive care. The presence of the endotracheal tube (ETT) is a risk factor since it is colonized by multispecies biofilm. Antimicrobial photodynamic therapy (aPDT) could be a strategy to decontaminate ETTs. We verify if methylene blue (MB) associated with external illumination of the ETT could be an alternative to destroy biofilm. We performed an in vitro and ex vivo study. In vitro study was performed with P. aeruginosa biofilm grew over ETT for 7 days. After treatment, the surviving cells were cultured for 3 days and the biofilm was analyzed by crystal violet absorbance. Ex vivo study employed ETT obtained from extubated patients. aPDT was performed with MB (100 µm ) and red LED (λ = 640±20 nm). We quantified the biofilm thickness and used scanning electron microscopy and fluorescence technique to verify morphological and functional changes after aPDT. Our results showed that bacteria remain susceptible to aPDT after sequential treatments. We also attested that aPDT can reduce biofilm thickness, disrupt biofilm attachment from ETT surface and kill microbial cells. These data suggest that aPDT should be investigated to decrease VAP incidence via ETT decontamination.     

Photodynamic Inactivation of Bacterial and Yeast Biofilms With a Cationic Porphyrin

The efficiency of 5,10,15,20‐tetrakis(1‐methylpyridinium‐4‐yl)porphyrin tetra‐iodide (Tetra‐Py⁺‐Me) in the photodynamic inactivation of single‐species biofilms of Staphylococcus aureus, Pseudomonas aeruginosa and Candida albicans and mixed biofilms of S. aureus and C. albicans was evaluated. The effect on the extracellular matrix of P. aeruginosa was also assessed. Irradiation with white light up to an energy dose of 64.8 J cm^?2 in the presence of 20 μm of Tetra‐Py⁺‐Me caused significant inactivation in all single‐species biofilms (3–6 log reductions), although the susceptibility was attenuated in relation to planktonic cells. In mixed biofilms, the inactivation of S. aureus was as efficient as in single‐species biofilms but the susceptibility of C. albicans decreased. In P. aeruginosa biofilms, a reduction of 81% in the polysaccharide content of the matrix was observed after treatment with a 20 μm PS concentration and a total light dose of 64.8 J cm^?2. The results show that the Tetra‐Py⁺‐Me causes significant inactivation of the microorganisms, either in biofilms or in the planktonic form, and demonstrate that polysaccharides of the biofilm matrix may be a primary target of photodynamic damage.     

Bulk Gas‐Phase Acidity

The capability of a gaseous Brønsted acid HB to deliver protons to a base is usually described by the gas‐phase acidity (GA) value of the acid. However, GA values are standard Gibbs energy differences and refer to individual gas pressures of 1 bar for acid HB, base B^?, and proton H⁺. We show that the GA value is not suited to describe the bulk acidity of a gaseous acid. Here the pressure dependence of the activities of HB, H(HB)_n⁺, and B(HB)_m^? that result from gaseous autoprotolysis have to be considered. In this work, the pressure‐dependent absolute chemical potential of the proton in the representative gaseous proton acids CH₄, NH₃, H₂O, HF, and HCl was worked out and the general theory to describe bulk gas phase acidity—that can directly be compared with solution acidity—was developed.     

Disinfect Porphyromonas gingivalis Biofilm on Titanium Surface with Combined Application of Chlorhexidine and Antimicrobial Photodynamic Therapy

Various antimicrobial modalities have been proposed to treat peri‐implantitis but resulted in limited outcomes. The aim of this in vitro study was to evaluate the disinfection efficacy of combined application of chlorhexidine digluconate (CHX) and antimicrobial photodynamic therapy (aPDT) of titanium surfaces previously contaminated with Porphyromonas gingivalis biofilm. P. gingivalis biofilms were grown on 32 polished and 32 sandblasted large‐grit acid‐etched (SLA) titanium surfaces. Titanium disks were allocated into four groups as follows: (1) immersed in phosphate‐buffered saline (PBS), (2) immersed in 0.2% CHX, (3) application of aPDT and (4) immersed in 0.2% CHX and subsequent aPDT. Residual bacteria were determined by microbial culture analysis and by scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM) imaging. Combination protocol (CHX+ aPDT) was the most effective in eradicating P. gingivalis (P < 0.05) on both polished and SLA surfaces. There was no significant difference in the number of remaining P. gingivalis between polished titanium disks and the SLA ones in four groups (P > 0.05). Under the limitation of this study, combined technique of preceding application of CHX and subsequent aPDT was shown to be an efficient method in reducing P. gingivalis numbers in both polished and SLA titanium surfaces.     

A Further Extension of Pnictide Oxide Chemistry – Synthesis and Structure of La2AuP2O

The phosphide oxide La₂AuP₂O was synthesized from lanthanum filings, dried La₂O₃, gold pieces, and ground red phosphorus in the ideal 1.33:0.33:1:2 ratio in an evacuated silica tube at 1473 K. Small single crystals were obtained by recrystallization in a NaCl/KCl flux. The structure was determined on the basis of single‐crystal X‐ray diffractometer data: new type, C2/m, a = 1537.3(3), b = 427.39(8), c = 1009.2(2) pm, β = 131.02(1) °, wR₂ = 0.046, 1102 F² values, 38 variables. La₂AuP₂O contains two striking structural motifs: The oxygen atoms are located in La₄ tetrahedra. The latter are cis‐edge‐shared forming polymeric cationic [La₂O]⁴⁺ chains. These cationic units are separated and charge‐balanced by [AuP₂]^4– polyanions which have monovalent gold in distorted trigonal planar phosphorus coordination. Two crystallographically independent phosphorus sites occur in the polyanion, i.e. isolated P^3– besides dumb‐bells P₂^4– (P2–P2 223 pm). La₂AuP₂O, which crystallizes in the form of ruby red transparent crystals, is an electron precise phosphide oxide (4La³⁺)(2Au⁺)(2P^3–)(P₂^4–)(2O^2–).     

Antimicrobial Photodynamic Efficiency of Novel Cationic Porphyrins towards Periodontal Gram‐positive and Gram‐negative Pathogenic Bacteria

The Gram‐negative Aggregatibacter actinomycetemcomitans and Fusobacterium nucleatum are major causative agents of aggressive periodontal disease. Due to increase in the number of antibiotic‐resistant bacteria, antimicrobial Photodynamic therapy (aPDT) seems to be a plausible alternative. In this work, photosensitization was performed on Gram‐positive and Gram‐negative bacteria in pure culture using new‐age cationic porphyrins, namely mesoimidazolium‐substituted porphyrin derivative ( ImP ) and pyridinium‐substituted porphyrin derivative ( PyP ). The photophysical properties of both the sensitizers including absorption, fluorescence emission, quantum yields of the triplet excited states and singlet oxygen generation efficiencies were evaluated in the context of aPDT application. The studied porphyrins exhibited high ability to accumulate into bacterial cells with complete penetration into early stage biofilms. As compared with ImP, PyP was found to be more effective for photoinactivation of bacterial strains associated with periodontitis, without any signs of dark toxicity, owing to its high photocytotoxicity.     

Boron as an Electron‐Pair Donor for B⋅⋅⋅Cl Halogen Bonds

MP2/aug′‐cc‐pVTZ calculations were performed to investigate boron as an electron‐pair donor in halogen‐bonded complexes (CO)₂(HB):ClX and (N₂)₂(HB):ClX, for X=F, Cl, OH, NC, CN, CCH, CH₃, and H. Equilibrium halogen‐bonded complexes with boron as the electron‐pair donor are found on all of the potential surfaces, except for (CO)₂(HB):ClCH₃ and (N₂)₂(HB):ClF. The majority of these complexes are stabilized by traditional halogen bonds, except for (CO)₂(HB):ClF, (CO)₂(HB):ClCl, (N₂)₂(HB):ClCl, and (N₂)₂(HB):ClOH, which are stabilized by chlorine‐shared halogen bonds. These complexes have increased binding energies and shorter B?Cl distances. Charge transfer stabilizes all complexes and occurs from the B lone pair to the σ* Cl?A orbital of ClX, in which A is the atom of X directly bonded to Cl. A second reduced charge‐transfer interaction occurs in (CO)₂(HB):ClX complexes from the Cl lone pair to the π* C≡O orbitals. Equation‐of‐motion coupled cluster singles and doubles (EOM‐CCSD) spin–spin coupling constants, ^1xJ(B‐Cl), across the halogen bonds are also indicative of the changing nature of this bond. ^1xJ(B‐Cl) values for both series of complexes are positive at long distances, increase as the distance decreases, and then decrease as the halogen bonds change from traditional to chlorine‐shared bonds, and begin to approach the values for the covalent bonds in the corresponding ions [(CO)₂(HB)?Cl]⁺ and [(N₂)₂(HB)?Cl]⁺. Changes in ¹¹B chemical shieldings upon complexation correlate with changes in the charges on B.     

Hydrogen Peroxide Enhances the Antibacterial Effect of Methylene Blue‐based Photodynamic Therapy on Biofilm‐forming Bacteria

Recently, increased attention has been focused on endoscopic disinfection after outbreaks of drug‐resistant infections associated with gastrointestinal endoscopy. The aims of this study were to investigate the bactericidal efficacy of methylene blue (MB)‐based photodynamic therapy (PDT) on Pseudomonas aeruginosa (P. aeruginosa), which is the major cause of drug‐resistant postendoscopy outbreak, and to assess the synergistic effects of hydrogen peroxide addition to MB‐based PDT on biofilms. In planktonic state of P. aeruginosa, the maximum decrease was 3 log₁₀ and 5.5 log₁₀ at 20 and 30 J cm^?2, respectively, following MB‐based PDT. However, the maximum reduction of colony forming unit (CFU) was decreased by 2.5 log₁₀ and 3 log₁₀ irradiation on biofilms. The biofilm formation was significantly inhibited upon irradiation with MB‐based PDT. When the biofilm state of P. aeruginosa was treated with MB‐based PDT with hydrogen peroxide, the CFU was significantly decreased by 6 log₁₀ after 20 J cm^?2, by 7 log₁₀ after 30 J cm^?2 irradiation, suggesting significantly higher efficacy than MB‐based PDT alone. The implementation of the combination of hydrogen peroxide with MB‐based PDT through working channels might be appropriate for preventing early colonization and biofilm formation in the endoscope and postendoscopy outbreak.     

Influence of feeding strategies of mixed microbial cultures on the chemical composition and microstructure of copolyesters P(3HB‐co‐3HV) analyzed by NMR and statistical analysis

NMR spectroscopy was applied for quantitative and qualitative characterization of the chemical composition and microstructure of a series of poly(3‐hydroxybutyrate‐co‐3‐hydoxyvalerate) copolymers, P(3HB‐co‐3HV), synthesized by mixed microbial cultures at several different feeding strategies. The monomer sequence distribution of the bacterially synthesized P(3HB‐co‐3HV) was defined by analysis of their high‐resolution 1D ¹³C NMR and 2D ¹H/¹³C HSQC and ¹H/¹³C HMBC NMR spectra. The results were verified by employment of statistical methods and suggest a block copolymer microstructure of the P(3HB‐co‐3HV) copolymers studied. Definitive distinction between block copolymers or a mixture of random copolymers could not be achieved. NMR spectral analysis indicates that the chemical composition and microstructure of the copolymers can be tuned by choosing a correct feeding strategy. Copyright © 2009 John Wiley & Sons, Ltd.     

Antibacterial poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) fibrous membranes containing quaternary ammonium salts

In this study, antimicrobial membranes based on biodegradable material poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) [P(3HB‐4HB)] and quaternary ammonium salts (QASs) by two methods have been performed. Three QASs with varied alkyl chain lengths have been synthesized successfully and characterized by ¹H nuclear magnetic resonance and Fourier transform infrared. The synthesized QASs were blended with P(3HB‐4HB) and electrospun into composite fibrous membranes or casted into conventional membranes. Electrospun fibrous membranes with large surface areas are a superior type of antimicrobial biomaterials, and they exhibit preferable properties than solution casting membranes. Specifically, electrospun fibrous membranes are tougher and can inactivate both Gram‐positive Staphylococcus aureus and Gram‐negative Escherichia coli O157:H7 in a contact time of 30 min, whereas the solution casting membranes cannot. The length of alkyl chain in the quaternary ammonium groups on the modified P(3HB‐4HB) membranes is able to influence the antimicrobial activity. This type of antimicrobial material may have potential applications in biomaterial field. Copyright © 2016 John Wiley & Sons, Ltd.     

LC‐ESI‐MS/MS analysis and pharmacokinetics of heterophyllin B,a cyclic octapeptide from Pseudostellaria heterophylla in rat plasma

Heterophyllin B (HB) is a cyclic octapeptide isolated from Pseudostellaria heterophylla. HB is used as the quality control index for evaluating P. heterophylla in the Chinese Pharmacopoeia. A rapid and sensitive LC‐ESI‐MS/MS method was developed and validated for the analysis of HB in rat plasma. Sample preparation consisted of a solid‐phase extraction step for the removal of interference and preconcentration of the target analyte HB and the internal standard N‐acetylcysteine before chromatographic analysis by MS/MS detection. The separation of HB and N‐acetylcysteine was performed using a Hypersil GOLD^TM C₁₈ column and a mixture of methanol–water (60:40, v/v) containing 10 mmol/L ammonium formate and 0.1% formic acid as the mobile phase. The determination step was optimized in the selected reaction monitoring mode for the highly selective and sensitive quantitation of HB in rat plasma. Intra‐ and inter‐assay precision (as relative standard deviation) was ≤9.1%, and accuracy was between 92.6 and 102.7%. The validated method was successfully applied to quantify HB concentrations up to 7 h after tail intravenous injections of 2.08, 4.16 and 8.32 mg/kg HB in rats. The LC‐MS/MS method identified the relevant pharmacokinetic parameters of HB and its studied analog. Copyright © 2015 John Wiley & Sons, Ltd.     

Novel Composite Plastics Containing Silver(I) Acylpyrazolonato Additives Display Potent Antimicrobial Activity by Contact

New silver(I) acylpyrazolonato derivatives displaying a mononuclear, polynuclear, or ionic nature, as a function of the ancillary azole ligands used in the synthesis, have been fully characterized by thermal analysis, solution NMR spectroscopy, solid‐state IR and NMR spectroscopies, and X‐ray diffraction techniques. These derivatives have been embedded in polyethylene (PE) matrix, and the antimicrobial activity of the composite materials has been tested against three bacterial strains (E. coli, P. aeruginosa, and S. aureus): Most of the composites show antimicrobial action comparable to PE embedded with AgNO₃. Tests by contact and release tests for specific migration of silver from PE composites clearly indicate that, at least in the case of the PE, for composites containing polynuclear silver(I) additives, the antimicrobial action is exerted by contact, without release of silver ions. Moreover, PE composites can be re‐used several times, displaying the same antimicrobial activity. Membrane permeabilization studies and induced reactive oxygen species (ROS) generation tests confirm the disorganization of bacterial cell membranes. The cytotoxic effect, evaluated in CD34⁺ cells by MTT (3‐(4,5‐dimethylthiazole‐2‐yl)‐2,5‐diphenyltetrazoliumbromide) and CFU (colony forming units) assays, indicates that the PE composites do not induce cytotoxicity in human cells. Studies of ecotoxicity, based on the test of Daphnia magna, confirm tolerability of the PE composites by higher organisms and exclude the release of Ag⁺ ions in sufficient amounts to affect water environment.     

Retardation Effect of Enzymatic Degradation of Microbial Polyesters at the Surface by Blending with Polystyrene

The enzymatic surface degradation behavior of the blend films of polystyrene (PS) with poly[((R)‐3‐hydroxybutyrate)‐co‐((L )‐3‐hydroxyvalerate)] (P(3HB‐co‐3HV)) or poly((R)‐3‐hydroxybutyrate (P(3HB)) were investigated using atomic force microscopy (AFM). It was found that the blends of PS with P(3HB‐co‐3HV) or P(3HB) are immiscible in both the amorphous and melt states. The degradation of both P(3HB‐co‐HV) and P(3HB) was significantly retarded at the initial stages of enzymatic attack by hydrophobic PS (up to 20 wt.‐%).     

Abiotic Hydrolysis of Poly[(R)-3-hydroxybutyrate] in Acidic and Alkaline Media

Poly[(R)-3-hydroxybutyrate)], P(3HB), is the most common member of polyhydroxyalkanoates, the natural biopolyesters of intrinsic biodegradability and biocompatibility. Abiotic hydrolysis of P(3HB) was investigated in acid and base media by monitoring the formation of two monomer products, 3-hydroxybutyric acid (3HB) and crotonic acid (CA), from three types of P(3HB) samples, amorphous granules, irregular precipitates and solvent cast films. The soluble monomeric products were not detected in acid solutions (0.1 to 4 N H⁺), but measured as the major hydrolytic products in base solutions (0.1 to 4 N OH⁻). Unlike the protons as catalyst in both hydrolysis and esterification, hydroxyl anions were consumed during formation of carboxylate anions. The amorphous granules of P(3HB) were decomposed 80- to 100-fold faster than the precipitates and solvent cast films. The latter two had around 71% crystallinity. The hydrolysis of amorphous grannules exhibited a quasi 0^th-order reaction rate and the activation energy of saponification was 82.2 kJ/mol, silimar to those of the biotic hydrolysis of P(3HB) by enzymes and living cells.     

Fine Control of the Redox Reactivity of a Nonheme Iron(III)–Peroxo Complex by Binding Redox‐Inactive Metal Ions

Redox‐inactive metal ions are one of the most important co‐factors involved in dioxygen activation and formation reactions by metalloenzymes. In this study, we have shown that the logarithm of the rate constants of electron‐transfer and C−H bond activation reactions by nonheme iron(III)–peroxo complexes binding redox‐inactive metal ions, [(TMC)Fe^III(O₂)]⁺‐M^{n +} (M^{n +}=Sc³⁺, Y³⁺, Lu³⁺, and La³⁺), increases linearly with the increase of the Lewis acidity of the redox‐inactive metal ions (ΔE ), which is determined from the g_zz values of EPR spectra of O₂^.−‐M^{n +} complexes. In contrast, the logarithm of the rate constants of the [(TMC)Fe^III(O₂)]⁺‐M^{n +} complexes in nucleophilic reactions with aldehydes decreases linearly as the ΔE value increases. Thus, the Lewis acidity of the redox‐inactive metal ions bound to the mononuclear nonheme iron(III)–peroxo complex modulates the reactivity of the [(TMC)Fe^III(O₂)]⁺‐M^{n +} complexes in electron‐transfer, electrophilic, and nucleophilic reactions.     

Synthesis,Characterization, Antimicrobial Screening,and Computational Studies of a Tripodal Schiff Base Containing Pyrimidine Unit

A novel tripodal Schiff base ligand, 5‐amino‐2,4,6‐tris(4‐carboxybenzimino)‐1,3‐pyrimidine (TTPS), was synthesized for the first time by the reaction of 2,4,5,6‐tetraaminopyrimidine with 4‐carboxybenzaldehyde. The ligand was characterized by means of ultraviolet–visible, Fourier transform infrared, one‐dimensional ¹H‐NMR, and one‐dimensional ¹³C‐NMR spectroscopies and elemental microanalysis. The Fourier transform infrared and NMR studies revealed that one of the NH₂ group in 2,4,5,6‐tetraaminopyrimidine is not involved in bonding. The in vitro antimicrobial activities of the ligand were investigated against Gram‐negative bacteria: Escherichia coli (ATCC 6749) and Pseudomonas aeruginosa (ATCC 9027), Gram‐positive bacteria: Staphylococcus aureus (ATCC 6538P) and Bacillus cereus (ATCC 14579), and fungi: Candida albicans and Aspergillus niger by the agar well diffusion technique. TTPS exhibits good activity against the test microorganisms. The minimum inhibitory concentrations of TTPS against S. aureus were compared with tetracycline and gentamicin, which are conventional bacterial drugs. The upper level of Lorke's method was used to determine the acute toxicity of the compound. The acute toxicity test indicates that TTPS is toxic at doses above 2154 mg/kg. The in vivo antimalarial assay was carried out on Plasmodium berghei based on the 4‐day suppressive method. The result shows a general dose‐dependent significant parasitemia inhibition compared with the negative control with TTPS having inhibition of 72.20% at 50 mg/kg and 65.81% at 25 mg/kg close to the value (87.22%) of the standard drug artesunate 5 mg/kg. Density functional theory method was used to complement this experimental investigation.     

Molten Ag2SO4‐based Ion‐Exchange Preparation of Ag0.5La0.5TiO3 for Photocatalytic O2 Evolution

Ag_0.5La_0.5TiO₃ with an ABO₃ perovskite structure was synthesized by a newly developed ion‐exchange method. Molten Ag₂SO₄ instead of traditional molten AgNO₃ was used as Ag⁺ source in view of its high decomposition temperature (1052 °C), thereby guaranteeing the complete substitution of Ag⁺ for Na⁺ in Na_0.5La_0.5TiO₃ with a stable ABO₃ perovskite structure at a high ion‐exchange temperature (700 °C). Under full‐arc irradiation, the O₂‐evolution activity of Ag_0.5La_0.5TiO₃ was about 1.6 times that of Na_0.5La_0.5TiO₃ due to the optimized electronic band structures and local lattice structures. On the one hand, the substitution of Ag⁺ for Na⁺ elevated the VBM and thus narrowed the band gap from 3.19 to 2.83 eV, thereby extending the light‐response range and, accordingly, enhancing the photoexcitation to generate more charge carriers. On the other hand, the substitution of Ag⁺ for Na⁺ induced a lattice distortion of the ABO₃ perovskite structure, thereby promoting the separation and migration of charge carriers. Moreover, under visible‐light irradiation, Ag_0.5La_0.5TiO₃ displayed notable O₂ evolution whereas Na_0.5La_0.5TiO₃ showed little O₂ evolution, thus demonstrating that the substitution of Ag⁺ for Na⁺ enabled the use of visible light to evolve O₂ photocatalytically. This work presents an effective route to explore novel Ag‐based photocatalysts.     

Reactive regioregular oligothiophenes and polythiophenes with Zincke salt structure: Synthesis,reactions, and chemical properties

Polythiophenes with reactive Zincke salt structure, P4ThPy⁺DNP(Cl^?)‐a and P5ThPy⁺DNP(Cl^?)‐a , were synthesized by the oxidation polymerization of oligothiophenes, such as 3'‐(4‐N‐(2,4‐dinitrophenyl)pyridinium chloride)?2,2':5',2'';5'',2'''‐quarterthiophene ( 4ThPy⁺DNP(Cl^?) ) and 4''‐(4‐N‐(2,4‐dinitrophenyl)pyridinium chloride)?2,2';5',2'';5'',2''';5''',2''''‐quinquethiophene ( 5ThPy⁺DNP(Cl^?) ), with iron(III) chloride. The reaction of P5ThPy⁺DNP(Cl^?)‐a with R‐NH₂ [R = n‐hexyl (Hex) and phenyl (Ph)] substituted the 2,4‐dinitrophenyl group into the R group with the elimination of 2,4‐dinitroaniline to yield P5ThPy⁺R(Cl^?) . Similarly, model compounds, 4ThPy⁺R(Cl^?) and 5ThPy⁺R(Cl^?) (R = Hex and Ph), were also synthesized. In contrast to the photoluminescent 4ThPy and 5ThPy , the compounds P4ThPy⁺DNP(Cl^?)‐a , P5ThPy⁺DNP(Cl^?)‐a , and P5ThPy⁺R(Cl^?) showed no photoluminescence because their internal pyridinium rings acted as quenchers. Cyclic voltammetry measurements suggested that P4ThPy⁺DNP(Cl^?)‐a , P5ThPy⁺DNP(Cl^?)‐a , and P5ThPy⁺R(Cl^?) received an electrochemical reduction of the pyridinium and 2,4‐dinitrophenyl groups and oxidation of the polymer backbone. P4ThPy⁺DNP(Cl^?)‐a and P5ThPy⁺DNP(Cl^?)‐a were electrically conductive (ρ = 3.0 × 10 ^{? 6} S cm ^{? 1} and 2.1 × 10 ^{? 6} S cm ^{? 1}, respectively) in the nondoped state. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 481–492     

Gas‐phase fragmentation reactions of protonated benzofuran‐ and dihydrobenzofuran‐type neolignans investigated by accurate‐mass electrospray ionization tandem mass spectrometry

We have investigated gas‐phase fragmentation reactions of protonated benzofuran neolignans (BNs) and dihydrobenzofuran neolignans (DBNs) by accurate‐mass electrospray ionization tandem and multiple‐stage (MSⁿ) mass spectrometry combined with thermochemical data estimated by Computational Chemistry. Most of the protonated compounds fragment into product ions B ([M + H–MeOH]⁺), C ([ B –MeOH]⁺), D ([ C –CO]⁺), and E ([ D –CO]⁺) upon collision‐induced dissociation (CID). However, we identified a series of diagnostic ions and associated them with specific structural features. In the case of compounds displaying an acetoxy group at C‐4, product ion C produces diagnostic ions K ([ C –C₂H₂O]⁺), L ([ K –CO]⁺), and P ([ L –CO]⁺). Formation of product ions H ([ D –H₂O]⁺) and M ([ H –CO]⁺) is associated with the hydroxyl group at C‐3 and C‐3′, whereas product ions N ([ D –MeOH]⁺) and O ([ N –MeOH]⁺) indicate a methoxyl group at the same positions. Finally, product ions F ([ A –C₂H₂O]⁺), Q ([ A –C₃H₆O₂]⁺), I ([ A –C₆H₆O]⁺), and J ([ I –MeOH]⁺) for DBNs and product ion G ([ B –C₂H₂O]⁺) for BNs diagnose a saturated bond between C‐7′ and C‐8′. We used these structure‐fragmentation relationships in combination with deuterium exchange experiments, MSⁿ data, and Computational Chemistry to elucidate the gas‐phase fragmentation pathways of these compounds. These results could help to elucidate DBN and BN metabolites in in vivo and in vitro studies on the basis of electrospray ionization ESI‐CID‐MS/MS data only.     

Die Oxidation von Triisopropylphosphan mit Iod: Zur Rolle von trockenem und feuchtem Lösungsmittel

Oxidation of Triisopropylphosphane with Iodine: The Role of Dry or Moist Solvent i‐Pr₃P ( 1 ) and iodine give i‐Pr₃PI₂ ( 2 ). In crystals obtained from CH₂Cl₂ solution, ion pairs [i‐Pr₃PI⁺I^–] of 2 exhibiting I…I interactions are linked by CH₂Cl₂ molecules. With a second equivalent of iodine, i‐Pr₃PI⁺ I₃^– ( 3 ) is formed; the reaction of 2 with AgSbF₆ provides i‐Pr₃PI⁺SbF₆^– ( 6 ). The presence of moisture and air leads to the formation of i‐Pr₃POH⁺ salts. Solid i‐Pr₃POH⁺I^– ( 4 ) exhibits P–O–H…I cation‐anion contacts, solid (i‐Pr₃PO)₂H⁺I₃^– ( 5 ) contains a centrosymmetric P=O…H…O=P‐bridged cation. Distinguishing i‐Pr₃PI⁺ salts 2 , 3 from hydrolysis products 4 , 5 by ³¹P‐NMR in reaction mixtures is not trivial, because both kinds of cations exihibit similar ³¹P‐NMR shifts and both participate in interactions with their anions, and in equilibria with uncharged donors: rapid I⁺ transfer reactions and I…I soft‐soft interactions involving 1 , and rapid H⁺ transfer reactions and hydrogen bonds involving i‐Pr₃P=O ( 7 ).