氯仿改性聚（3-己基噻吩）有机电化学晶体管及其神经突触功能模仿

通过旋涂法制备了有机半导体聚（3-己基噻吩）（P3HT）薄膜，在二氯苯溶剂中引入氯仿对P3HT薄膜进行改性。以改性的P3HT薄膜作为沟道层，以离子凝胶作为电解质层制备了有机电化学晶体管（OECT）。通过原子力显微镜、紫外-可见光谱和拉曼光谱探究了氯仿改性对P3HT薄膜粗糙度和分子有序度的影响，采用半导体参数仪研究了氯仿改性对材料电学性能的影响。实验结果表明，氯仿改性降低了P3HT薄膜的粗糙度，提高了分子排列的有序度。氯仿改性后的OECT在-0.5 V和-1.0 V的电脉冲刺激下呈现显著的神经突触兴奋脉冲电流响应特性，相比于未改性的器件，电导调控幅值分别增加了约2倍和16倍，且延长了其保持特性。基于氯仿改性OECT的人工神经突触网络将MNIST手写数字识别准确率从73.6%提高至92.7%，有望在高性能神经形态计算方面发挥重要作用。     

P3HT修饰一维有序壳核式CdS/ZnO纳米棒阵列复合膜的光电化学性能

采用电化学方法在铟锡氧化物(ITO)导电玻璃上制备了高度有序的ZnO纳米棒阵列, 在ZnO纳米棒阵列上先后电化学沉积CdS纳米晶膜及聚3-己基噻吩(P3HT)薄膜得到P3HT修饰的一维有序壳核式CdS/ZnO纳米阵列结构, 并通过扫描电镜(SEM)、透射电镜(TEM)、X射线衍射(XRD)、能量散射X射线(EDX)等表征手段证实了该结构的形成. 以此纳米结构薄膜为光阳极组装新型半导体敏化太阳电池, 研究了CdS纳米晶膜的厚度和P3HT薄膜的沉积对电池光伏性能的影响, 初步探讨了电荷在电池结构中的传输机理, 结果表明, CdS纳米晶膜和P3HT薄膜的沉积有效地拓宽了光阳极的光吸收范围, 实验中电池的光电转换效率最高达到1.08%.     

给受体共混质量比对P3HT:PCBM薄膜结构和器件性能的影响

以聚3-己基噻吩(P3HT)为给体、[6,6]-苯基-C61-丁酸甲酯(PCBM)为受体的光伏体系作为研究对象,采用溶剂退火的后处理方法制备薄膜样品,利用紫外-可见(UV-Vis)吸收光谱、原子力显微镜(AFM)、X射线衍射(XRD)等测试手段分别对共混膜样品的形貌和结构进行表征,同时利用熵值统计方法对AFM形貌图像进行分析处理.并在此基础上制备太阳能电池器件,其结构为氧化铟锡导电玻璃/聚3,4-乙撑二氧噻吩:聚苯乙烯磺酸盐/聚3-己基噻吩:[6,6]-苯基-C61-丁酸甲酯/金属铝(ITO/PEDOT:PSS/P3HT:PCBM/Al),研究了给受体共混比例(质量比)对活性层薄膜以及电池性能的影响.结果表明,受体PCBM含量的增加会影响P3HT给体相的有序结晶,当给受体比例为1:1时,活性层薄膜具有较宽的紫外-可见吸收特征,且具有较好的相分离和结晶度,基于该样品制备的电池器件其光电转换效率达到三种比例的最大值(2.77%).表明退火条件下,改变给受体比例可以影响活性层的微纳米结构而最终影响电池的光电转换效率.     

喷涂法制备大面积倒置聚合物光伏器件

采用喷涂工艺制备了结构为ITO/ZnO/P3HT∶PCBM/V2O5/Ag(P3HT:聚噻吩;PCBM:6,6-苯基-C61-丁酸甲酯)的大面积倒置光伏器件,有效面积为1.0×1.1 cm2。 光谱测试结果表明,退火处理后,P3HT∶PCBM薄膜吸收显著增强,并且产生一定程度的红移。 采用ZnO和V2O5代替LiF和PEDOT∶PSS(聚(3,4-乙撑二氧噻吩)∶聚苯乙烯磺酸盐)作为器件修饰层,避免了PEDOT∶PSS对ITO的腐蚀和LiF潮解,采用Ag代替Al作为金属背电极避免了Al被氧化。 经过后退火处理器件的效率从1.1%提升至1.65%。 器件的稳定性相对于传统结构有了大幅提升,8周后器件效率只衰减10%。     

给受体共混质量比对P3HT∶PCBM薄膜结构和器件性能的影响

以聚3-己基噻吩(P3HT)为给体、[6,6]-苯基-C61-丁酸甲酯(PCBM)为受体的光伏体系作为研究对象,采用溶剂退火的后处理方法制备薄膜样品,利用紫外-可见(UV-Vis)吸收光谱、原子力显微镜(AFM)、X射线衍射(XRD)等测试手段分别对共混膜样品的形貌和结构进行表征,同时利用熵值统计方法对AFM形貌图像进行分析处理.并在此基础上制备太阳能电池器件,其结构为氧化铟锡导电玻璃/聚3,4-乙撑二氧噻吩∶聚苯乙烯磺酸盐/聚3-己基噻吩:[6,6]-苯基-C61-丁酸甲酯/金属铝(ITO/PEDOT∶PSS/P3HT∶PCBM/Al),研究了给受体共混比例(质量比)对活性层薄膜以及电池性能的影响.结果表明,受体PCBM含量的增加会影响P3HT给体相的有序结晶,当给受体比例为1∶1时,活性层薄膜具有较宽的紫外-可见吸收特征,且具有较好的相分离和结晶度,基于该样品制备的电池器件其光电转换效率达到三种比例的最大值(2.77％).表明退火条件下,改变给受体比例可以影响活性层的微纳米结构而最终影响电池的光电转换效率.     

一种基于聚噻吩-聚硒吩全共轭嵌段共聚物的合成及性质研究

全共轭刚性-刚性嵌段共聚物兼具嵌段共聚物的微相分离特性和共轭聚合物的光电性能，引起了人们越来越多的关注.基于此，我们利用格氏置换（GRIM）方法合成了全共轭刚性-刚性嵌段共聚物聚（3-己基硒吩）-b-聚（3-（6-羟基）-己基噻吩）（P3HS-b-P3HHT）.通过在噻吩段的烷基侧链末端引入羟基基团来丰富全共轭体系的溶液结构，并利用羟基的热交联特性提高聚噻吩均聚物的薄膜场效应晶体管的热稳定性.一方面，通过溶剂共混（氯仿/吡啶和甲醇/吡啶混合溶剂），调控P3HS-b-P3HHT分子在混合溶剂中的刚性-刚性相互作用，使P3HS-b-P3HHT在混合溶剂中自组装形成不同的纳米结构，如纳米带、纳米纤维和纳米微球等.另一方面，将P3HS-b-P3HHT和聚（3-己基噻吩）（P3HT）共混，利用羟基之间的热交联，使P3HS-b-P3HHT/P3HT共混薄膜在薄膜场效应晶体管中表现出较好的热稳定性.     

基底温度对刮涂制备的P3HT:PCBM薄膜形貌和光伏电池性能的影响

研究了刮涂制备P3HT:PCBM(P3HT:聚3-己基噻吩,PCBM:[6,6]-苯基-C61-丁酸甲酯)活性层的过程中,基底温度对P3HT:PCBM活性层薄膜性质和电池性能的影响.结果表明,提高基底温度在缩短薄膜干燥时间的同时,抑制了PCBM相的大尺度聚集,并改善了P3HT:PCBM薄膜中P3HT在(100)方向上的结晶程度,但降低了π-π共轭方向上的有序度.制备的光伏电池经过进一步退火处理后可形成良好的互穿网络结构,能量转换效率可达3.93％.     

纳米结构TiO2/聚3-己基噻吩多孔膜电极光电性能研究

用光电流作用谱、光电流-电势图等光电化学方法研究了ITO/聚3-己基噻吩(ITO/ P3HT)膜和纳米结构TiO2/聚3-己基噻吩(TiO2/P3HT)复合膜的光电转换性质. 结果表明, P3HT膜的禁带宽度为1.89 eV, 价带位置为－5.4 eV. 在ITO/TiO2/ P3HT复合膜电极中存在p-n异质结, 在一定条件下异质结的存在有利于光生电子-空穴对的分离. P3HT修饰ITO/TiO2电极可使光电流发生明显的红移, 从而提高了宽禁带半导体的光电转换效率.     

聚3-甲基噻吩及聚3-己基噻吩修饰钛酸盐纳米管的光电化学性能研究

采用水热法制备了钛酸盐纳米管, 并将钛酸盐纳米管制备成纳米结构电极进行光电化学研究. 钛酸盐纳米管产生阳极光电流, 具有n-型半导体特性. 结果表明, 聚3-甲基噻吩[poly(3-methylthiophene), PMeT]、聚3-己基噻吩[poly(3-hexylthiophene), P3HT]修饰钛酸盐纳米管后产生的光电流均较纯钛酸盐纳米管的光电流高, 且使产生光电流的波长向长波区移动. 钛酸盐纳米管/PMeT、钛酸盐纳米管/P3HT的光电转换效率分别达11.40%, 0.91%(未校正光子损失). 钛酸盐纳米管/PMeT的光电转换效率较钛酸盐纳米管/P3HT的光电转换效率高10.5%. 钛酸盐纳米管/PMeT、钛酸盐纳米管/P3HT中存在p-n异质结, 在一定条件下p-n异质结的存在有利于光生电子/空穴的分离.     

聚(3-己基噻吩)作为光谱增感层在有机太阳电池光谱响应增强中的应用

报道了利用聚(3-己基噻吩)(P3HT)作为前置缓冲层来弥补(4,8-双-(2-乙基己氧基)-苯并[1,2-b:4,5-b']二噻吩)-(4-氟代噻并[3,4-b]噻吩(PBDT-TT-F):[6,6]-苯基-C₆₁-丁酸甲酯(PC₆₁BM)共混体相异质结(BHJ)电池对450-600 nm处光谱响应不足的新的器件结构设计思路. 光谱带隙为1.8 eV的PBDT-TT-F 在550-700 nm处有很强的光谱吸收, 在有机太阳电池器件上有很好的应用潜能. 但其在350-550 nm处的吸收不强, 影响了器件对太阳光谱的利用效率. 与此相比, P3HT薄膜的光谱吸收主要在450-600 nm范围内, 同PBDT-TT-F 形成良好的互补关系. 新设计的器件外量子效率(EQE)研究结果表明, 利用P3HT 作为前置缓冲层可以与PBDT-TT-F:PC₆₁BM薄膜中的PC₆₁BM形成平面异质结, 从而拓展了器件在450-600 nm处的光谱响应范围,实现光谱增感作用. 优化P3HT的厚度为20 nm左右, 器件对外输出的短路光电流密度从11.42 mA·cm^-2提高到12.15 mA·cm^-2, 达到了6.3%的提升.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.