锌镍铝水滑石微球的制备及吸附性能

以Zn(NO_3)_2·6H_2O、Ni(NO_3)_2·6H_2O、Al(NO_3)_3·9H_2O和尿素为原料,采用一步水热法制备分散性良好的三元锌镍铝水滑石(ZnNiAl-LDHs)微球。通过X射线衍射(XRD)、傅里叶转换红外光谱(FTIR)、场发射扫描电镜(FESEM)、透射电镜(TEM)和氮气吸附-脱附等测试手段对样品的结构和形貌进行表征,并比较ZnNiAl-LDHs和ZnAl-LDHs对甲基橙(MO)的吸附性能。结果表明,ZnNiAl-LDHs是由纳米片组成、具有3D结构的微球,粒径为1~2.5μm,比表面积为156m2·g~(-1),远大于ZnAl-LDHs的比表面积38m2·g~(-1);ZnNiAl-LDHs和ZnAl-LDHs对甲基橙的饱和吸附量分别为329.60和143.47mg·g~(-1),ZnNiAl-LDHs表现出更强的吸附能力,其吸附等温线和吸附动力学分别符合Langmuir等温线模型和准二级动力学模型。     

纳米纤维素的改性及其吸附重金属离子的应用研究

纳米纤维素材料(cellulose nanomaterials,CNs)作为一种可再生材料,具有比表面积大、高结晶度、高强度、高杨氏模量、高表面活性、化学性质稳定等优异性能。纤维素作为天然高分子材料,在清除水体重金属离子中具有较好的应用的价值,因此本文对纤维素的改性及其吸附重金属的应用进行了综述。首先简要地介绍了纳米纤维素的结构与命名方法;其次,对纳米纤维素的改性(即小分子改性与高分子改性)进行了详细的介绍,并重点阐述了改性纳米纤维素基材以粉末、凝胶(包括水凝胶与气凝胶)两种不同的形态通过吸附清除水体重金属离子的应用研究。最后,对改性纳米纤维素基水吸附材料存在的优缺点进行了探讨,并指出了该材料在生产和应用过程中还需解决的问题。     

聚乙烯亚胺-磁性羧甲基纤维素复合物对铜离子和镉离子的吸附

制备了聚乙烯亚胺修饰的磁性羧甲基纤维素纳米复合材料(PEI-MCMC),对其结构进行了表征分析,探究了该材料在不同p H和时间、不同离子浓度下对铜离子(Cu~(2+))和镉离子(Cd~(2+))的吸附量。结果表明,PEI-CMC对Cu~(2+)和Cd~(2+)的吸附过程均符合拟二级动力学模型,为化学吸附的过程。该材料在pH 5～6条件下,Cu~(2+)和Cd~(2+)分别在10和25 min时达到吸附平衡,平衡时的理论吸附量分别为32.24和83.33 mg/g。该吸附材料对Cu~(2+)和Cd~(2+)的吸附速度快,适用条件广,便于分离,为含Cu、Cd的废液处理提供了一定的参考。     

纳米纤维素基吸附材料

纳米纤维素是一大类微纤单元直径在纳米级(2~100 nm)的新型纤维素材料,因其长径比高、比表面积大、力学性能优异及表面易于化学修饰,成为现今生物质吸附材料领域的研究热点。本文总结了近年来纳米纤维素基吸附材料方面的研究成果,介绍了以纳晶纤维素(NCC)、纳纤化纤维素(NFC)以及细菌纤维素(BC)为基材的吸附材料,及其在移除染料、重金属、CO_2气体和其他污染物(如抗生素、芳香族有机物、放射性元素、易挥发的有毒有机物)的研究进展。最后,本文对纳米纤维素基吸附材料存在的问题进行探讨,并对其未来发展前景进行了展望。     

改性纤维素的制备及分光光度法对Cu~(2+)吸附研究

针对日益严重的铜离子污染问题,以化学浆纤维素为原料,通过氨基酸接枝修饰2,2,6,6-四甲基哌啶氧自由基(TEMPO)氧化体系氧化的纤维素,制备出一种新型吸附剂,并采用灵敏简便的分光光度法研究改性对铜离子的吸附效果。结果表明,氨基酸修饰纤维素(AMC)与TEMPO氧化纤维素(TOC)相比,对铜离子的吸附效果有不同程度的提升,其中组氨酸改性的吸附效果最好,低浓度时吸附率可以高达97%。随着浓度增大,吸附率下降,但是吸附量增大,当吸附200 mg/L的Cu2+溶液时,吸附量可达47 mg/g。此外,研究了不同条件下AMC对Cu2+的吸附情况,包括AMC投加量、初始浓度、pH值等。结果表明,吸附过程的吸附模型符合Langmuir等温模型,吸附动力学可以用准二级吸附动力学方程拟合。     

插层材料ZnAl-LDHs的制备和应用

本文总结了锌铝层状双金属氢氧化物(ZnAl-LDHs)的基本制备方法,重点介绍了插层组装和层板剥离方面的最新进展,并阐述了ZnAl-LDHs在催化、医药、阴离子吸附和功能高分子方面的应用。     

甲基丙烯酸接枝纳米纤维素水凝胶的制备及吸附性能研究

本文通过酸解法制备纳米纤维素(nCE),再利用自由基聚合法将甲基丙烯酸(MAA)接枝到纳米纤维素上,得到含有多孔结构的纤维素基水凝胶,并以制备的水凝胶作为吸附剂处理染料废水。用傅里叶变换红外光谱仪(FTIR)、和扫描电镜(SEM)技术对其进行了表征。讨论了吸附时间、pH、染料初始浓度、吸附剂用量对染料去除率的影响,优化了吸附条件。并对吸附机理进行了探讨,吸附动力学符合准二级动力学模型,平衡吸附等温线与Langmuir吸附等温方程拟合。通过对吸附等温线的拟合,计算得到了吸附剂对亚甲基蓝(MB)的最大吸附量为1250.00 mg·g~(-1)。     

氨基硫脲改性纤维素的合成及其对Hg(Ⅱ)的吸附

通过氯化和胺解两步反应,对玉米秸秆纤维素骨架中的羟基进行化学改性,得到氨基硫脲改性的纤维素。通过红外光谱和电子能谱对该改性玉米秸秆纤维素进行了表征,并研究了作为吸附剂对水溶液中Hg(Ⅱ)的吸附能力。结果表明:所获得的氨基硫脲改性纤维素对Hg(Ⅱ)的最大饱和吸附量为499.6mg/g;吸附模型符合Langmuir吸附等温模型和准二级动力学模型,拟合系数R2在0.98以上;改性纤维素材料表面富有的氨基硫脲官能团与重金属Hg(Ⅱ)离子发生的表面络合作用,增加了其吸附性能。     

微波辅助细菌纤维素酯的制备及对Pb(Ⅱ)的高效去除

以细菌纤维素(BC)为原料,通过微波辅助酯化改性的方法制得了两种改性细菌纤维素,细菌纤维素黄原酸酯(XMBC)和细菌纤维素硫酸酯(SMBC)。对所制备的样品进行X射线衍射(XRD)、扫描电镜-电子能谱(SEM-EDS)、傅里叶变换红外(FT-IR)光谱和BET比表面积分析,通过续批式实验考察其对Pb(Ⅱ)的去除效果。研究了pH值、反应时间、温度、污染物初始浓度、离子强度对其吸附能力的影响以及材料再生性能。结果表明,改性细菌纤维素的比表面积和孔容均有上升,其对Pb(Ⅱ)的吸附量随反应温度和离子强度的增加而降低,最优pH值为5.0。巯基的引入增强了细菌纤维素对Pb(Ⅱ)的吸附能力,改性后的吸附剂显示出比原始BC更优异的吸附性能,其中XMBC和SMBC的最大吸附量分别为144.93和126.58 mg·g^-1,该吸附过程符合准二级速率方程和Langmuir等温吸附模型。材料对Pb(Ⅱ)的吸附是自发的放热过程,且吸附剂易于再生和重复回收。因此, SMBC和XMBC作为从水中富集分离重金属的新型材料具有及大应用前景。     

纳米氧化镁对Cr(Ⅵ)、Cr(Ⅲ)和Cu(Ⅱ)的吸附特性

采用乳液法制备不同形貌的花状和片状MgO纳米粒子并研究其对Cr(Ⅵ)、Cr(Ⅲ)和Cu(Ⅱ)的吸附性能。运用静态吸附实验考察吸附时间和吸附剂MgO用量对Cr(Ⅵ)、Cr(Ⅲ)和Cu(Ⅱ)的去除率影响,探讨MgO纳米粒子的微观机构对其吸附性能的影响机制。结果表明,花状MgO和片状MgO对Cu(Ⅱ)、Cr(Ⅵ)和Cr(Ⅲ)离子表现出优异的吸附性能,对金属离子的去除效果是Cu(Ⅱ)Cr(Ⅵ)Cr(Ⅲ),5min基本达到吸附平衡;花状MgO对金属离子Cr(Ⅵ)和Cr(Ⅲ)的吸附性能明显优于片状MgO,这归因于比表面积大、多孔结构的花状MgO为金属离子提供更多的吸附活性位。与Temkin模型和Freundlich模型相比,Langmuir等温吸附模型更符合MgO样品在含Cu(Ⅱ)离子溶液体系中对Cr(Ⅵ)和Cr(Ⅲ)离子的吸附过程,这意味着Cr(Ⅵ)和Cr(Ⅲ)离子在MgO纳米粒子表面的吸附属于单分子层吸附。花状和片状MgO对金属铬离子的吸附行为符合伪一级动力学模型。     

Study on the mechanism of removing fluoride from wastewater by oxalic acid modified aluminum ash-carbon slag-carbon black doped composite

In this study, SAA@CS-CB(aluminum-ash carbide slag carbon black doped composite) was prepared by sintering method and modified by impregnation with oxalic acid to obtain SAA@CS-CB_oa. Fluoride adsorption experiments were carried out using this composite as adsorbent. With increasing pH values, the adsorption amount of fluoride decreases in the range of 2–11. The pseudo second order equation and Langmuir model were fit to the experimental data, and the adsorption of fluoride by SAA@CS-CB_oa exhibited spontaneous and endothermic characteristics. When PO₄^3-, CO₃^2–, SO₄^2-, Cl^-, NO₃^–, Br^- and HCO₃^– anions were individually or combined in solution, the adsorbents exhibited higher fluoride selectivity and sensitivity, while PO₄^3-and CO₃^2– weakened the adsorption of fluoride in solution in the same way regardless of the presence of the other 5 anions. The results of SEM, EDS, XRD and FTIR characterizations showed that the mechanism of fluoride adsorption and removal by SAA@CS-CB_oa included the combined effects of electrostatic attraction, surface coordination precipitation and ion exchange. SAA@CS-CB_oa is an effective composite material for water adsorption of fluoride, and still has an excellent performance of cyclic regeneration after 10 times adsorption desorption. This study provides a new approach for the utilization of fluoride removal resources for industrial solid waste resource recycling.     

Speciation analysis of selenoproteins in human serum by microbore affinity-HPLC hyphenated to ICP-Sector field-MS using a high efficiency sample introduction system

Silica gel and nanometer SiO₂ modified with 4-(2-aminoethylamino)-N-(2-(2-aminoethyl amino)ethyl)butanamide (SG-AAEB and nanometer SiO₂-AAEB), which were prepared based on chemical immobilization, were used as sorbents for the solid phase extraction of Cu(II), Fe(III), and Pb(II) prior to their determination by inductively coupled plasma optical emission spectrometry. Adsorption efficiencies of the two sorbents towards metal ions were investigated by batch and column procedures. For both sorbents the preconcentration conditions of analytes including effects of pH, shaking time, sample flow rate and adsorption capacity, were investigated and compared. The differences of silica gel and nanometer SiO₂ in sizes and surface structures resulted in distinct chemical activity and selectivity toward metals. At pH 4, the adsorption capacity of SG-AAEB was found to be 12.2, 14.5 and 9.8 mg g^?1 for Cu(II), Fe(III), and Pb(II), respectively. In comparison, nanometer SiO₂-AAEB showed a high selectivity toward Pb(II) and has a much larger adsorption capacity (22.3 mg g^?1). Furthermore, the application of SG-AAEB and nanometer SiO₂-AAEB for simultaneous preconcentration of trace Cu(II), Fe(III), and Pb(II) from natural samples was performed with satisfactory results.     

Pebax‐Based Membrane Filled with Two‐Dimensional Mxene Nanosheets for Efficient CO2 Capture

Mixed matrix membranes (MMMs) made from inorganic fillers and polymers is a kind of promising candidate for gas separation. In this work, two‐dimensional MXene nanosheets were synthesized and incorporated into a polyether‐polyamide block copolymer (Pebax) matrix to fabricate MMM for CO₂ capture. The physicochemical properties of MXene nanosheets and MXene/Pebax membranes were studied systematically. The introduction of MXene nanosheets provided additional molecular transport channels and meanwhile enhanced the CO₂ adsorption capacity, thereby enhancing both the CO₂ peremance and CO₂/N₂ selectivity of Pebax membrane. The optimized MXene/Pebax membrane with a MXene loading of 0.15 wt % displayed a high separation performance with a CO₂ permeance of 21.6 GPU and a CO₂/N₂ selectivity of 72.5, showing potential application in CO₂ capture.     

Graphene anchored with ZnFe2O4 nanoparticles as a high-capacity anode material for lithium-ion batteries

Heterostructured ZnFe₂O₄–graphene nanocomposites are synthesized by a facile hydrothermal method. The as-prepared ZnFe₂O₄–graphene nanocomposites are characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Brunauer–Emmett–Teller (BET) analysis and galvanostatic charge and discharge measurements. Compared with the pure ZnFe₂O₄ nanoparticles, the ZnFe₂O₄–graphene nanocomposites exhibit much larger reversible capacity up to 980 mAh g⁻¹, greatly improved cycling stability, and excellent rate capability. The superior electrochemical performance of the ZnFe₂O₄–graphene nanocomposites could be attributed to the synergetic effect between the conducting graphene nanosheets and the ZnFe₂O₄ nanoparticles.     

Photoinduced Multiple Effects to Enhance Uranium Extraction from Natural Seawater by Black Phosphorus Nanosheets

Based on the photoinduced photothermal, photoelectric, and photocatalytic effects of black phosphorus (BP) nanosheets, a BP‐PAO fiber with enhanced uranium extraction capacity and high antibiofouling activity is fabricated by compositing BP nanosheets into polyacrylamidoxime (PAO). The photothermal effect increases the coordination interaction between UO₂²⁺ and the functional amidoxime group, and the photoelectric effect produces the surface positive electric field that exhibits electrostatic attraction to the negative [UO₂(CO₃)₃]^4?, which all increase the capacity for uranium adsorption. The photocatalytic effect endows the adsorbent with high antibiofouling activity by producing biotoxic reactive oxygen species. Owing to these three photoinduced effects, the photoinduced BP‐PAO fiber shows a high uranium adsorption capacity of 11.76 mg g^?1, which is 1.50 times of the PAO fiber, in bacteria‐containing natural seawater.     

In Situ Growth of MnO2 Nanosheets on N‐Doped Carbon Nanotubes Derived from Polypyrrole Tubes for Supercapacitors

Nitrogen‐doped porous carbon nanotubes@MnO₂ (N‐CNTs@MnO₂) nanocomposites are prepared through the in situ growth of MnO₂ nanosheets on N‐CNTs derived from polypyrrole nanotubes (PNTs). Benefiting from the synergistic effects between N‐CNTs (high conductivity and N doping level) and MnO₂ nanosheets (high theoretical capacity), the as‐prepared N‐CNTs@MnO₂‐800 nanocomposites show a specific capacitance of 219 F g^?1 at a current density of 1.0 A g^?1, which is higher than that of pure MnO₂ nanosheets (128 F g^?1) and PNTs (42 F g^?1) in 0.5 m Na₂SO₄ solution. Meanwhile, the capacitance retention of 86.8 % (after 1000 cycles at 10 A g^?1) indicates an excellent electrochemical performance of N‐CNTs@MnO₂ prepared in this work.     

石墨烯/尖晶石LiMn2O4纳米复合材料制备及电化学性能

采用溶胶凝胶法和还原氧化石墨法制备尖晶石LiMn2O4纳米晶和石墨烯纳米片,并采用冷冻干燥法制备了石墨烯/尖晶石LiMn2O4纳米复合材料,利用XRD、SEM、AFM等对其结构及表面形貌进行表征;利用CV、充放电、EIS研究纳米复合材料的电化学性能和电极过程动力学特征。结果表明:纳米LiMn2O4电极材料及其石墨烯掺杂纳米复合材料的放电比容量分别为107.16 mAh.g-1,124.30 mAh.g-1,循环100周后,对应容量保持率为74.31%和96.66%,石墨烯可显著改善尖晶石LiMn2O4电极材料的电化学性能,归结于其良好的导电性。纳米复合材料EIS上感抗的产生与半导体尖晶石LiMn2O4不均匀地分布在石墨烯膜表面所造成局域浓差有关,并提出了感抗产生的模型。     

氧化锆-活性炭纤维复合材料的制备及其对F-吸附性能

采用水热合成法成功制备了氧化锆-活性炭纤维复合材料,并研究了其对F^-的吸附行为。表征结果表明,复合材料中氧化锆粒子成功负载于活性炭纤维上。吸附实验结果表明,负载了氧化锆的活性炭纤维对F^-有高效的去除效率,其吸附机理包括离子交换和静电作用力,吸附等温线符合Langmuir等温吸附模式,吸附动力学可用拟二级动力学模型拟合。吸附量随着溶液pH的升高而降低,共存离子Cl^-、NO₃^-和SO₄^2-对F^-在氧化锆-活性炭纤维复合材料上的吸附几乎没有影响。     

氧化锆-活性炭纤维复合材料的制备及其对F-吸附性能

采用水热合成法成功制备了氧化锆-活性炭纤维复合材料,并研究了其对F^-的吸附行为.表征结果表明,复合材料中氧化锆粒子成功负载于活性炭纤维上.吸附实验结果表明,负载了氧化锆的活性炭纤维对F^-有高效的去除效率,其吸附机理包括离子交换和静电作用力,吸附等温线符合Langmuir等温吸附模式,吸附动力学可用拟二级动力学模型拟合.吸附量随着溶液pH的升高而降低,共存离子Cl^-、NO₃^-和SO₄^2-对F^-在氧化锆-活性炭纤维复合材料上的吸附几乎没有影响.     

A millimeter-sized negatively charged polymer embedded with molybdenum disulfide nanosheets for efficient removal of Pb(II) from aqueous solution

Molybdenum disulfide (MoS₂) has excellent trapping ability for lead ions whereas its micro-/nanoscale size has greatly impeded its practical applications in the flow-through systems. Herein, a millimeter-sized nanocomposite MoS2?001 was synthesized for Pb²⁺ removal by loading MoS₂ nanosheets into a polystyrene cation exchanger D-001 by a facile hydrothermal method. The proposed structure and adsorption mechanism of MoS₂?001 was confirmed by the scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) analysis. The nanocomposite showed outstanding adsorption capacity and rapid adsorption kinetic for Pb²⁺ removal, and the adsorption behavior followed the Langmuir adsorption model and pseudo-first-model kinetic model. Pb²⁺ uptake by MoS₂?001 still maintains a high level even in the presence of extremely highly competitive ions (Ca(II) and Mg(II)), suggesting its high selectivity for Pb²⁺ adsorption. Besides, the fixed-bed column experiments further certified that MoS₂?001 is of great potential for Pb²⁺ removal from the wastewater in practical engineering applications. Even more gratifying is that the exhausted MoS₂?001 can be regenerated by NaCl-EDTANa₂ solution without any significant adsorption capacity loss. Consequently, all the results indicated that MoS₂?001 is a promising candidate adsorbent for lead-containing wastewater treatment.