Hydrosilation of 1‐alkyne at nearly flat,terraced, homogeneously hydrogen‐terminated silicon (100) surfaces

An experimental study of the derivatization of Si(100) surfaces with 1‐octyne has been carried out via x‐ray photoelectron spectroscopy at different take‐off angles, and infrared absorption spectroscopy in attenuated total reflection mode and atomic force microscopy have been used to characterize the pristine surface. Our study has shown that it is possible to prepare nearly flat, terraced, homogeneously hydrogen‐terminated Si(100) surfaces via exposure to H₂ at high temperature (1100 °C) and that these surfaces may be functionalized with hydrocarbon moieties by simple immersion in the unsaturated hydrocarbon at ～200 °C. Copyright © 2004 John Wiley & Sons, Ltd.     

Nitridation of V5Al8 films with NH3 by Rapid Thermal Processing (RTP)

V₅Al₈ films (thickness about 100 nm) were deposited on sapphire substrates by RF‐sputtering and nitridated with NH₃ at 600‐1250 °C (1 min) in a RTP system. The as deposited and nitridated films were investigated by ESCA (electron spectroscopy for chemical analysis), XRD (X‐ray diffraction), XRR (X‐ray reflectometry), AFM (atomic force microscopy) and SEM (scanning electron microscopy). Formation of an aluminum nitride layer at the surface and precipitation of V(Al) in the bulk was found. In the temperature regime from 600 °C to 900 °C a considerable amount of oxygen is incorporated in the aluminum nitride layer. The roughness of the surface increased with increasing temperature and at 1250 °C a partially detaching of the AlN layer could be observed.     

Structural Characterization and Thermal Behavior of 1-Amino-1-methylamino-2,2-dinitroethylene

A novel high energetic material, 1‐amino‐1‐methylamino‐2,2‐dinitroethylene (AMFOX‐7), was synthesized through 1,1‐diamino‐2,2‐dinitroethylene (FOX‐7) reacting with methylamine in N‐methyl pyrrolidone (NMP) at 80.0°C, and its structure was determined by single crystal X‐ray diffraction. The crystal is monoclinic, space group P2₁/m with crystal parameters of a=6.361(3) Å, b=7.462(4) Å, c=6.788(3) Å, β=107.367(9)°, V=307.5(3) ų, Z=2, µ=0.160 mm^?1, F(000)=168, D_c=1.751 g·cm^?3, R₁=0.0463 and wR₂=0.1102. Thermal decomposition of AMFOX‐7 was studied, and the enthalpy, apparent activation energy and pre‐exponential constant of the exothermic decomposition reaction are 303.0 kJ·mol^?1, 230.7 kJ·mol^?1 and 10^21.03 s^?1, respectively. The critical temperature of thermal explosion is 245.3°C. AMFOX‐7 has higher thermal stability than FOX‐7.     

Synthesis,Characterization, and Crystal Structure of Thallium(I) Complex containing Monodeprotonated 2,6‐Pyridinedicarboxylic Acid

The reaction of an ethanolic solution 2,6‐pyridinedicarboxylic acid ( 1 , LH₂) with TlNO₃ in the presence of triethylamine led to the coordination polymer [Tl(LH)]_n ( 2 ). The complex was characterized by elemental analysis, IR spectroscopy and single‐crystal X‐ray diffraction. Crystal data for 2 at –80 °C: monoclinic, space group I2/a, a = 696.1(1), b = 1190.6(2), c = 931.0(2) pm, β = 103.28(1)°, Z = 4, R₁ = 0.0256.     

Synthesis,Characterization, and Crystal Structure of a Chromium(III)‐Complex Containing 2,6‐Pyridinedicarboxylic Acid and 1,10‐Phenanthroline

The reaction of solution 2,6‐pyridinedicarboxylic acid and 1,10‐phenanthroline ( 1 ) with CrCl₃·6H₂O led to the complex [Cr(phen)(pydc)(H₂O)][Cr(pydc)₂]·4H₂O ( 2 ) (phen is 1,10‐phenanthroline and pydcH₂ is 2,6‐pyridinedicarboxylic acid). 2 was characterized by elemental analysis, IR spectroscopy and single‐crystal structure determination. Crystal data for 2 at ?80 °C: triclinic, space group , a = 818.5(1), b = 1492.2(1), c = 1533.6(2) pm, α = 76.45(1)°, β = 84.22(1)°, γ = 77.99(1)°, Z = 2, R₁ = 0.0416.     

Hyperbranched poly(ether–urea)s using AB2‐type blocked isocyanate monomer and azide monomer: Synthesis,characterization, reactive end functionalization,and copolymerization with AB monomer

3,5‐bis(4‐aminophenoxy)phenyl phenylcarbamate—a novel AB₂‐type blocked isocyanate monomer and 3,5‐bis{ethyleneoxy(4‐aminophenoxy)}phenyl carbonyl azide—a novel AB₂‐type azide monomer were synthesized in high yield. Step‐growth polymerization of these monomers were found to give a first example of hyperbranched poly (aryl‐ether‐urea) and poly(aryl‐alkyl‐ether‐urea). Molecular weights (M_w) of the polymer were found to vary from 1,858 to 52,432 depending upon the monomer and experimental conditions used. The polydispersity indexes were relatively narrow due to the controlled regeneration of isocyanate functional groups for the polymerization reaction. The degree of branching (DB) was determined using ¹H‐NMR spectroscopy and the values ranged from 87 to 54%. All the polymers underwent two‐stage decomposition and were stable up to 300 °C. Functionalized end‐capping of poly(aryl‐ether‐urea) using phenylchloroformate and di‐t‐butyl dicarbonate (Boc)₂O changed the thermal properties and solubility of the polymers. Copolymerization of AB₂‐type blocked isocyante monomer with functionally similar AB monomer were also carried out. The molecular weights of copolymers were found to be in the order of 6 × 10⁵ with narrow dispersity. It was found that the T_g's of poly(aryl‐alkyl‐ether‐urea)s were significantly less (46–49 °C) compared to poly(aryl‐ether‐urea)s. Moreover the former showed melting transition at 154 °C, which was not observed in the latter case. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2959–2977, 2007     

Synthesis,pH‐ and temperature‐induced micellization and gelation of doubly hydrophilic triblock copolymer of poly(N,N‐dimethylamino‐2‐ethylmethacrylate)‐b‐poly(ethylene glycol)‐b‐poly(N,N‐dimethylamino‐2‐ethylmethacrylate) in aqueous solutions

A doubly hydrophilic triblock copolymer of poly(N,N‐dimethylamino‐2‐ethyl methacrylate)‐b‐Poly(ethylene glycol)‐b‐poly(N,N‐dimethylamino‐2‐ethylmethacrylate) (PDMAEMA‐b‐PEG‐b‐PDMAEMA) with well‐defined structure and narrow molecular weight distribution (M_w/M_n = 1.21) was synthesized in aqueous medium via atom transfer radical polymerization (ATRP) of N,N‐dimethylamino‐2‐ethylmethacrylate (DMAEMA) initiated by the PEG macroinitiator. The macroinitiator and triblock copolymer were characterized with ¹H NMR and gel permeation chromatography (GPC). Fluorescence spectroscopy, dynamic light scattering (DSL), transmittance measurement, and rheological characterization were applied to investigate pH‐ and temperature‐induced micellization in the dilute solution of 1 mg/mL when pH > 13 and gelation in the concentrated solution of 25 wt % at pH = 14 and temperatures beyond 80 °C. The unimer of R_h = 3.7 ± 0.8 nm coexisted with micelle of R_h = 45.6 ± 6.5 nm at pH 14. Phase separation occurred in dilute aqueous solution of the triblock copolymer of 1 mg/mL at about 50 °C. Large aggregates with R_h = 300–450 nm were formed after phase separation, which became even larger as R_h = 750–1000 nm with increasing temperature. The gelation temperature determined by rheology measurement was about 80 °C at pH 14 for the 25 wt % aqueous solution of the triblock copolymer. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5869–5878, 2008     

Synthesis,Characterization, and Crystal Structure of a New Coordination Polymer of Lead(II) Containing 2,6‐Pyridinedicarboxylic Acid

The reaction of solution 2,6‐pyridinedicarboxylic acid ( 1 ) and 2,2′‐Bipyridine with Pb(NO₃)₂ led to the coordination polymer [Pb(pydc)]_n ( 2 ) (pydcH₂ is 2,6‐pyridinedicarboxylic acid). This complex was characterized by elemental analysis, IR spectroscopy and single‐crystal structure of 2 . Crystal data for 2 at ?80 °C: monoclinic, space group P2₁/n, a = 977.2(1), b = 554.0(1), c = 1425.3(2) pm, β = 104.75(1)°, Z = 4, R₁= 0.0261. The units [Pb(pydc)] form infinite chains along [010].     

Poly(phenyl methacrylate) and poly(1‐naphthyl methacrylate) prepared in microemulsions

Phenyl methacrylate and 1‐naphthyl methacrylate were polymerized in microemulsions using stearyltrimethylammonium chloride, cetyltrimethylammonium bromide, and a mixture of nonionic Triton surfactants to form latexes that were 20–30 nm in diameter. A temperature of 70 °C was needed to obtain polymers using thermal initiation. The tacticities of poly(phenyl methacrylate) (PPhMA) (55% rr) and poly(1‐naphthyl methacrylate) (P‐1‐NM) (47% rr) were the same as those of the polymers prepared in toluene solutions. The weight average molecular weights were 1 × 10⁶ and 5 × 10⁵ g/mol for PPhMA and P‐1‐NM prepared in microemulsions with very broad distributions. PPhMA samples from microemulsions and solution had the same T_g = 127 °C. P‐1‐NM from microemulsions had T_g = 145–147 °C compared with T_g = 142 °C for P‐1‐NM from solution. The molecular weights and the glass‐transition temperatures of both PPhMA and P‐1‐NM from microemulsions are substantially higher than any previously reported. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 519–524, 2001     

Ambipolar Transport in the Smectic E Phase of 2‐Propyl‐5′′‐Hexynylterthiophene Derivative over a Wide Temperature Range

5‐Hexyl‐5′′‐hexynyl‐2,2′:5′,2′′‐terthiophene exhibits the smectic E phase below 200 °C and does not crystallize when it is cooled to ?100 °C. Between 200 and ?100 °C, non‐dispersive transport is observed for holes and electrons with time‐of‐flight spectroscopy. Over the entire temperature range, the electron mobility is approximately twice as high as that of the hole. The hole and electron transport characteristics in the smectic phase below 0 °C are explained by the Gaussian disorder model, which was proposed for amorphous organic semiconductors. The disorder parameters, σ and Σ, are almost the same for holes and electrons. However, the pre‐exponential parameter μ₀ for the electron is twice as large as that for the hole, which can be attributed to the difference in the extension of the LUMO of the molecules. The energetic disorder σ is primarily determined by the disorder in the orientation of the permanent dipoles of liquid crystal molecules.     

Solution,thermal and optical properties of new poly(pyridinium salt)s derived from conjugated quinoline diamines

Several new poly(pyridinium salt)s with quinoline diamine moieties in their backbones with tosylate and triflimide counterion were prepared by either a ring‐transmutation polymerization reaction with bis(pyrylium tosylate) with a series of isomeric quinoline diamines in dimethyl sulfoxide (DMSO) for 48 h at 130–140 °C or a metathesis reaction of the tosylate polymers with lithium triflimide in DMSO at about 60 °C. Their chemical structures were confirmed by FTIR, ¹H and ¹³C NMR spectroscopy, and elemental analysis. Their number‐average molecular weights (M_n) were in the range of 18,000–58,000, and their polydispersities were in the range of 1.12–1.53 as determined by gel permeation chromatography. They had thermal stability in the temperature range of 353–455 °C and glass‐transition temperatures >240 °C. They had good solubility in common organic solvents and were characterized with polarizing optical microscopy (POM) studies for their lyotropic liquid‐crystalline properties. Their light‐emission properties were examined by spectrofluorometry in both the solution and film states. Their quantum yields were also determined. Additionally, their morphologies in the thin‐film states and melt‐drawn fibers were examined with POM, scanning electron microscopy, and transmission electron microscopy techniques. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Supported Organometallic Complexes. XXXVI [1] Diaminediphosphineruthenium(II) Interphase Catalysts for the Hydrogenation of α, β‐Unsaturated Ketones

The T—silyl functionalized diamine‐bis(ether‐phosphine)ruthenium(II) complexes 1a(T ° ) — 1g(T ° ) (Scheme 1) were sol‐gel processed in the presence of different amounts of the co‐condensation agents CH₃Si(OMe)₃ (Me—T ° ) and (MeO)₂SiMe—(CH₂)₆—MeSi(OMe)₂ (D ° —C₆—D ° ) to produce a library of the interphase catalysts X1a — X1c , X2a — X2g , and X3a — X3g . Due to the remarkable electronic and steric effects of the co‐ligands on the catalytic activity of such complexes, a series of aliphatic and aromatic diamines was selected. The new polymers were investigated by multinuclear CP/MAS solid‐state NMR spectroscopy as well as by EXAFS, EDX, SEM, and BET methods. Selected interphase catalysts show high activities and selectivities in the hydrogenation of trans‐4‐phenyl‐3‐butene‐2‐one.     

Atom Transfer Radical Polymerization of N,N‐Dimethylacrylamide

Summary: The living polymerization of N,N‐dimethylacrylamide was achieved by atom transfer radical polymerization catalyzed by copper chloride complexed with a new ligand, N,N′‐bis(pyridin‐2‐ylmethyl 3‐hexoxo‐3‐oxopropyl)ethane‐1,2‐diamine (BPED). With methyl 2‐chloropropionate as the initiator, the polymerization reached high conversions (> 90%) at 80 °C and 100 °C, producing polymers with very close to theoretical values and low polydispersity. The ligand, temperature, and copper halide strongly affected the activity and control of the polymerization.

PDMA molecular weight and polydispersity dependence on the DMA conversion in the DMA bulk polymerizations at different temperatures: DMA/CuCl/MCP/BPED = 100/1/1/1, 100 °C (♦, ⋄); 80 °C (▴, ▵); 60 °C (▪, □); and DMA/CuCl/MCP/BPED = 100/1/1/2, 80 °C (•, ○).     

Synthesis,Structures, and Properties of Layered Quaternary Chalcogenides of the General Formula ALnEQ4 (A = K,Rb; Ln = Ce,Pr, Eu; E = Si,Ge; Q = S,Se)

Four related quaternary compounds containing rare‐earth metals have been synthesized employing the molten flux method and metathesis. The reactions of Eu and Rb₂S₅ with Si and Ge in evacuated fused silica ampoules at 725 °C for 150 h yielded RbEuSiS₄ ( I ) and RbEuGeS₄ ( II ), respectively. On the other hand, a reaction between CeCl₃ and K₄Ge₄Se₁₀ at 650 °C for 148 h has yielded KCeGeSe₄ ( III ) and KPrSiSe₄( IV ) was obtained by the reaction of elemental Pr, Si and Se in KCl flux at 850 °C for 168 h. Crystal data for these compounds are as follows: I , orthorhombic, space group P2₁2₁2₁ (#19), a = 6.392(1), b = 6.634(2), c = 17.001(3) Å, α = β = γ = 90°, Z = 4; II , monoclinic, space group P2₁/m (#11), a = 6.498(2), b = 6.689(3), c = 8.964(3) Å, β = 108.647(6)°, Z = 2; III , monoclinic, space group P2₁ (#4), a = 6.852(2), b = 7.025(2), c = 9.017(3) Å, β = 108.116(2)°, Z = 2; IV , monoclinic, space group P2₁ (#4), a = 6.736(2), b = 6.943(2), c = 8.990(1) Å, β = 108.262(2)°, Z = 2. The crystal structures of I ‐ IV contain two‐dimensional corrugated anionic layers of the general formula, [LnEQ₄]^? (Ln = Ce, Pr, Eu; E = Si, Ge and Q = S, Se) alternately piled upon layers of alkali cations. In addition to structural elucidation, Raman and UV‐visible spectroscopy, and magnetic measurements for compound III (KCeGeSe₄) are also discussed.     

Sorption,diffusion, and permeation of ethylbenzene in poly(1‐trimethylsilyl‐1‐propyne)

The solubility, diffusivity, and permeability of ethylbenzene in poly(1‐trimethylsilyl‐1‐propyne) (PTMSP) at 35, 45 and 55 °C were determined using kinetic gravimetric sorption and pure gas permeation methods. Ethylbenzene solubility in PTMSP was well described by the generalized dual‐mode model with χ = 0.39 ± 0.02, b = 15 ± 1, and C^′_H = 45 ± 4 cm³ (STP)/cm³ PTMSP at 35 °C. Ethylbenzene solubility increased with decreasing temperature; the enthalpy of sorption at infinite dilution was −40 ± 7 kJ/mol and was essentially equal to the enthalpy change upon condensation of pure ethylbenzene. The diffusion coefficient of ethylbenzene in PTMSP decreased with increasing concentration and decreasing temperature. Activation energies of diffusion were very low at infinite dilution and increased with increasing concentration to a maximum value of 50 ± 10 kJ/mol at the highest concentration explored. PTMSP permeability to ethylbenzene decreased with increasing concentration. The permeability estimated from solubility and diffusivity data obtained by kinetic gravimetric sorption was in good agreement with permeability determined from direct permeation experiments. Permeability after exposure to a high ethylbenzene partial pressure was significantly higher than that observed before the sample was exposed to a higher partial pressure of ethylbenzene. Nitrogen permeability coefficients were also determined from pure gas experiments. Nitrogen and ethylbenzene permeability coefficients increased with decreasing temperature, and infinite dilution activation energies of permeation for N₂ and ethylbenzene were −5.5 ± 0.5 kJ/mol and −74 ± 11 kJ/mol, respectively. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1078–1089, 2000     

Synthesis and characterization of alternating copolymers containing triphenylamine as hole‐transporting units

A series of light‐emitting poly(p‐phenylene vinylene)s with triphenylamine units as hole‐transporting moieties in the main chain were synthesized via Wittig condensation in good yields. The newly formed vinylene double bonds possessed a trans configuration, which was confirmed by Fourier transform infrared and NMR spectroscopy. The high glass‐transition temperature (83–155 °C) and high decomposition temperature (>300 °C) suggested that the resulting copolymers possessed high thermal stability. These copolymers, especially TAAPV1, possessed a high weight‐average molecular weight (47,144) and a low polydispersity index (1.55). All the copolymers could be dissolved in common organic solvents, such as tetrahydrofuran (THF), CHCl₃, CH₂Cl₂, and toluene, and exhibited intense photoluminescence in THF (the emission maxima were located from 478 to 535 nm) and in film (from 478 to 578 nm). The low onsets of the oxidation potential (0.6–0.75 V) suggested that the alternating copolymers possessed a good hole‐transporting property due to the incorporation of triphenylamine moieties. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3278–3286, 2001     

Spectroscopic Examinations of Hydrogen Bonding in Hydroxy‐Functionalized ADMET Chemistry

Wide‐angle X‐ray scattering (WAXS) and temperature‐dependent Fourier transform infrared spectroscopy (FTIR) spectroscopy are used to study hydrogen bonding interactions of a hydroxyl‐functionalized polyethylene (PE) prepared by acyclic diene metathesis (ADMET) chemistry. The hydroxyl polymer exhibits an orthorhombic unit cell structure with characteristic reflection planes at (110) and (200), comparable to pure crystalline PE. These data unequivocally demonstrate that the OH branch is excluded from the PE lamellae. Furthermore, the polymer melts 100 °C higher than all previous analogous polymers possessing precision placed long aliphatic branches that also are excluded from PE lamellae. Temperature‐dependent FTIR spectroscopy from ambient to 150 °C, followed by cooling to 125 °C supports exclusion of the hydroxyl group from the crystalline lattice. It is concluded that these hydroxyl groups form stable physical networks in the amorphous region via hydrogen bonding and are important for the overall morphology of such polymers.

     

Polymerization of higher linear α‐olefins with (CH3)2Si(2‐methylbenz[e]indenyl)2ZrCl2

Poly‐α‐olefins ranging from poly‐1‐pentene to poly‐1‐octadecene with narrow polydispersities were synthesized with (CH₃)₂Si(2‐methylbenz[e]indenyl)₂ZrCl₂ and methylaluminoxane at polymerization temperatures (T_p 's) ranging from −15 to 180 °C and were characterized by gel permeation chromatography, NMR spectroscopy, and differential scanning calorimetry. The molar masses of the homopolymers obtained with (CH₃)₂Si(2‐methylbenz[e]indenyl)₂ZrCl₂ were notably higher than those of poly‐α‐olefins synthesized with other zirconium‐based metallocenes under similar conditions. The temperature dependence of the molar mass distribution of the poly‐α‐olefins can be described by a common exponential decay function regardless of the investigated monomer. At T_p 's ranging from 20 to 100 °C, moderate isotacticity prevailed, but outside this temperature range, the polymers were less stereoregular. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2333–2339, 2000     

Polymer electrolyte membranes based on p‐toluenesulfonic acid doped poly(1‐vinyl‐1,2,4‐triazole): Synthesis,thermal and proton conductivity properties

Throughout this work, the synthesis, thermal as well as proton conducting properties of acid doped heterocyclic polymer were studied under anhydrous conditions. In this context, poly(1‐vinyl‐1,2,4‐triazole), PVTri was produced by free radical polymerization of 1‐vinyl‐1,2,4‐triazole with a high yield. The structure of the homopolymer was proved by FTIR and solid state ¹³C CP‐MAS NMR spectroscopy. The polymer was doped with p‐toluenesulfonic acid at various molar ratios, x = 0.5, 1, 1.5, 2, with respect to polymer repeating unit. The proton transfer from p‐toluenesulfonic acid to the triazole rings was proved with FTIR spectroscopy. Thermogravimetry analysis showed that the samples are thermally stable up to ～250 °C. Differential scanning calorimetry results illustrated that the materials are homogeneous and the dopant strongly affects the glass transition temperature of the host polymer. Cyclic voltammetry results showed that the electrochemical stability domain extends over 3 V. The proton conductivity of these materials increased with dopant concentration and the temperature. Charge transport relaxation times were derived via complex electrical modulus formalism (M*). The temperature dependence of conductivity relaxation times showed that the proton conductivity occurs via structure diffusion. In the anhydrous state, the proton conductivity of PVTri1PTSA and PVTri2PTSA was measured as 8 × 10^?4 S/cm at 150 °C and 0.012 S/cm at 110 °C, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1016–1021, 2010     

Study of formation and thermal stability of the Fe/ZnO(000‐1) interface

Formation and thermal stability of the Fe/ZnO(000‐1) interface have been studied by means of X‐ray photoelectron spectroscopy and low energy electron diffraction. The results indicated a pseudo 2D growth mode for iron on ZnO. In addition, it could be shown that under ultra high vacuum conditions deposited Fe⁰ on a ZnO(000‐1) single crystal was partially oxidized by a small fraction of residual ? OH‐groups and ZnO to FeO. A strong temperature dependence of the interface reactivity was found upon annealing at temperatures up to 600 °C. Starting from 200 °C iron was first oxidized to bivalent iron oxide. After complete oxidation of Fe⁰ to Fe²⁺ at 375 °C, Fe²⁺ reacted to Fe³⁺. Above temperatures of 500 °C the deposited metallic iron was completely oxidized to trivalent iron. Further experiments with FeO on ZnO showed the oxidation state and the oxide film thickness of the deposited iron to be mainly dependent on the annealing temperature. Copyright © 2008 John Wiley & Sons, Ltd.