Functionalization of the active chain ends of poly(vinyl chloride) obtained by single‐electron‐transfer/degenerative‐chain‐transfer mediated living radical polymerization: Synthesis of telechelic α,ω‐di(hydroxy)poly(vinyl chloride)

The chloroiodomethyl chain ends of poly(vinyl chloride) (PVC) obtained by the single‐electron‐transfer/degenerative‐chain‐transfer mediated living radical polymerization of vinyl chloride initiated with iodoform were quantitatively functionalized by the reaction with 2‐allyloxyethanol (CH₂?CHCH₂OCH₂CH₂OH). This reaction was performed in dimethyl sulfoxide at 70 °C and was catalyzed by sodium dithionite/sodium bicarbonate. The resulting product is the first example of telechelic PVC [α,ω‐di(hydroxy)PVC]. A possible mechanism for this reaction was suggested. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1255–1260, 2005     

Effects of plasticizers on novel electromechanical actuations with different poly(vinyl chloride) gels

Four different plasticizers were applied to make different poly(vinyl chloride) (PVC) gels, poly(vinyl chloride)‐bis(2‐ethylhexyl)phthalate (PVC‐DOP), poly(vinyl chloride)‐di‐n‐butylphthalate, poly(vinyl chloride)‐bis(2‐ethylhexyl)adipate, and poly(vinyl chloride)‐tris(2‐ethylhexyl)trimellitate. In our previous work, we reported that PVC‐DOP gel exhibits novel and reversible deformations of creeping and jointlike bending induced by direct current electric fields. In this article, we scrutinize the effects of plasticizers on electromechanical actuations, that is, reversible creeping and bending actuation with four of the different aforementioned gels. We measured the relative creeping distance, creeping area, creeping velocity, current observed, and bending angle as a function of applied electric fields for different PVC gels and found significant differences among them. To explain these variations, we compared the utility of plasticizers on the basis of the properties of different PVC gels, such as plasticizer‐retention ability, bending modulus, elongation at break, and the dielectric constant. The mentioned properties of the PVC gels played vital roles on their electromechanical actuations. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2119–2127, 2003     

Poly(vinyl chloride) on the way from the 19th century to the 21st century

Despite all the technical and economic problems and the public discussions on the environmental dangers and hazards of chlorine chemistry, poly(vinyl chloride) (PVC) is the second most produced plastic (with a worldwide capacity of about 31 million tons), placing after polyolefins and before styrene polymers. Presently, PVC production worldwide is growing at a rate of more than 4% per year. The application of PVC was first described in a patent in 1913, but only after 1930 did a sustained interest in PVC arise in several industrial laboratories. The most remarkable milestones in PVC history and their importance to the development of macromolecular chemistry are briefly described, and some present PVC research and industrial applications, with respect to polymerization, stabilization, bulk property modification, and chemical and material recycling of PVC waste, are discussed. Some actual selected topics include the emulsion polymerization of vinyl chloride with polymeric surfactants and controlled free-radical polymerization with nitroxyls, whereas ionic and metal organic initiators have not found any technical applications. Chemical reactions offer many possibilities for the modification of PVC, but they have been not used on a technical scale yet. Much work has been done on stabilization with nontoxic or metal-free systems. The bulk properties of PVC can be influenced by impact modification through the addition of graft copolymers or by blending with other polymers. Also presented are some problems and recent developments in PVC recycling. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 578–586, 2004     

Terpyridine‐modified poly(vinyl chloride): Possibilities for supramolecular grafting and crosslinking

Commercially available poly(vinyl chloride) (PVC) was covalently modified with terpyridine supramolecular binding units in a two‐step reaction. First, PVC was modified with aromatic thiols to introduce OH functionalities into the polymer backbone, which were subsequently reacted with an isocyanate‐functionalized terpyridine binding unit. The resulting functionalized material contained metal‐ion binding sites, which could be used for grafting and crosslinking reactions. A grafting experiment was performed with a small organic terpyridine ligand. The complexation of the modified PVC with several transition‐metal ions was studied with ultraviolet–visible spectroscopy and gel permeation chromatography. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2964–2973, 2003     

Single electron transfer–degenerative chain transfer mediated living radical polymerization (SET–DTLRP) of vinyl chloride initiated with methylene iodide and catalyzed by sodium dithionite

Single electron transfer–degenerative chain transfer mediated living radical polymerization (SET–DTLRP) of vinyl chloride (VC) initiated with methylene iodide (CH₂I₂) and catalyzed by sodium dithionite (Na₂S₂O₄) in water at 35 °C produces a telechelic poly(vinyl chloride) (LRP–PVC) with two different active chain ends: ICH ₂ (CH₂CHCl)_n‐1CH₂ CHClI , and 2.0 functionality. The reactivity and initiator efficiency of CH₂I₂ in SET–DTLRP of VC was lower than those of iodoform. A possible mechanism for the CH₂I₂‐initiated SET–DTLRP of VC was suggested. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 773–778, 2005     

Graft copolymerization of butyl acrylate and 2‐ethyl hexyl acrylate from labile chlorines of poly(vinyl chloride) by atom transfer radical polymerization

Trace amounts of labile chlorines present in poly(vinyl chloride) (PVC) were found to act as initiation sites for the preparation of graft copolymers of PVC by copper‐mediated atom transfer radical polymerization (ATRP). High grafting yields were attained during the graft copolymerizations of n‐butyl acrylate (161.8%) and 2‐ethyl hexyl acrylate (51.2%) in 7.5 h. In both cases, the grafting proceeded with first‐order kinetics with respect to the monomer concentrations, this being typical for ATRP. Gel permeation chromatography traces of the resulting products did not exhibit additional peaks attributable to the formation of free homopolymers. The presented procedure offers an efficient means of preparing self‐plasticized PVC structures. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3457–3462, 2003     

Enhanced morphological heterogeneity of PCL in the presence of PVC with isothermal supercritical CO2 treatment

This report presents a continuing study of the morphological changes of polycaprolactone (PCL) with isothermal supercritical CO₂ treatments at 304 atm and 35 °C in the presence of poly(vinyl chloride) (PVC). DSC and small‐angle X‐ray scattering (SAXS) data find that the CO₂‐assisted melting of PCL at 304 atm and 35 °C recrystallized in the presence of PVC during depressurization of CO₂ can result in a decreased thickness of crystal lamellar layers. Heterogeneity, with a size (21.7 nm for pure PCL) larger than the crystal layer thickness (8.2 nm for pure PCL) and the amorphous layer thickness (4.4 nm for pure PCL), is formed after the supercritical CO₂ treatment. The size of this heterogeneity is found to enhance from 21.7 nm for pure PCL to 29.8 and 34.9 nm for the PCL samples containing 10 and 25 wt % PVC, respectively. These big heterogeneities in the PCL/PVC blends formed during CO₂ depressurization might arise from the segregated PVC‐rich amorphous domains that are located between bundles of the lamellar stacks, possibly as a result of the molecular dragging on PCL during depressurization of the PCL‐interacted CO₂. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 85–93, 2006     

Preparation and characterization of rigid poly (vinyl chloride)/MMT nanocomposites

In this article, a Haake torque rheometer equipped with an internal mixer is used to study the influence of the amount of sodium montmorillonite (Na⁺‐MMT) and organically modified MMT (O‐MMT) on the characteristics of rigid poly (vinyl chloride) (PVC)/Na⁺‐MMT and PVC/O‐MMT nanocomposites, respectively. It is observed that the fusion time and temperature of the rigid PVC/Na⁺‐MMT nanocomposites are decreased with increasing the amount of Na⁺‐MMT. On the contrast, the fusion time and temperature of the rigid PVC/O‐MMT nanocomposites are increased with increasing the amount of O‐MMT. Results of X‐ray diffraction (XRD) and transmission electron microscope (TEM) indicate that MMT is partially encapsulated and intercalated in the rigid PVC/Na⁺‐MMT nanocomposites. However, results of XRD and TEM show MMT is partially intercalated and exfoliated in the rigid PVC/O‐MMT nanocomposites. Tensile strength, yield strength, and elongation at break of the rigid PVC/MMT (including PVC/Na⁺‐MMT and PVC/O‐MMT) nanocomposites were improved simultaneously with adding 1–3 wt % Na⁺‐MMT or O‐MMT with respect to those of pristine PVC. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1465–1474, 2005     

Single‐electron‐transfer/degenerative‐chain‐transfer mediated living radical polymerization of vinyl chloride catalyzed by thiourea dioxide/octyl viologen in water/tetrahydrofuran at 25 °C

The single‐electron‐transfer/degenerative‐chain‐transfer mediated living radical polymerization (SET–DTLRP) of vinyl chloride (VC) in H₂O/tetrahydrofuran at 25 °C catalyzed by thiourea dioxide [(NH₂)₂C?SO₂] is reported. This polymerization occurs only in the presence of a basic sodium bicarbonate (NaHCO₃) buffer and the electron‐transfer cocatalyst octyl viologen. The resulting poly(vinyl chloride) (PVC) has a number‐average molecular weight of 1500–7000 and a weight‐average molecular weight/number‐average molecular weight ratio of 1.5. This PVC does not contain detectable amounts of structural defects and has both active chloroiodomethyl and inactive chloromethyl chain ends. Because of possible side reactions caused by the primary sulfoxylate anion (SO), the catalytic activity of (NH₂)₂C?SO₂ in the SET–DTLRP of VC is lower than that of the single‐electron‐transfer agent sodium dithionite. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 287–295, 2005     

Formation of crystalline inclusion compounds of poly (vinyl chloride) of different stereoregularity with γ-cyclodextrin

This work reports the formation and detailed characterization of the γ-cyclodextrin (γ-CD) inclusion compounds (ICs) formed with two poly (vinyl chloride) samples with different isotactic content. The ICs were characterized by X-ray diffraction, solid state ¹³C-NMR, solution ¹H-NMR, FT-infrared, differential scanning calorimetry, and thermogravimetric analysis. Experimental evidence of the inclusion of the guest polymer chains into the narrow channels created by the γ-CD crystalline host lattice has been obtained. Examination of coalesced poly (vinyl chlorides) (PVCs) obtained after the host γ-CD is removed reveals different characteristics specifically for the coalesced PVC sample with higher isotactic content. An increase in T_g was observed by DSC for this PVC. To the contrary, the T_g of the coalesced PVC sample with lower isotactic content is almost the same as that of the as-synthesized sample. Thermogravimetric analysis indicated that coalesced PVC with higher isotactic content acquires a degree of stabilization after modification by threading into and being extracted from its γ-CD IC. The results suggest that an irreversible conformational change takes place when PVC forms ICs with a solid host lattice like γ-CD. The PVC molecules extend and reorganize into a more stable conformation in the IC, consequently improving the properties of the coalesced sample. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2503–2513, 2007     

Morphology and fracture behavior of toughening‐modified poly(vinyl chloride)/organophilic montmorillonite composites

Toughening‐modified poly(vinyl chloride) (PVC)/organophilic montmorillonite (OMMT) composites with an impact‐modifier resin (Blendex 338) were prepared by melt intercalation, and their microstructures were investigated with wide‐angle X‐ray diffraction, transmission electron microscopy, and scanning electron microscopy. The mechanical properties of the PVC composites were examined in terms of the content of Blendex and OMMT, and the fracture toughness was analyzed with a modified essential work of fracture model. Intercalated structures were found in the PVC/OMMT composites with or without Blendex. Either Blendex or OMMT could improve the elongation at break and notched impact strength of PVC at proper contents. With the addition of 30 phr or more of Blendex, supertough behavior was observed for PVC/Blendex blends, and their notched impact strength was increased more than 3319% compared with that of pristine PVC. Furthermore, the addition of OMMT greatly improved both the toughness and strength of PVC/Blendex blends, and the toughening effect of OMMT on PVC/Blendex blends was much larger than that on pristine PVC. Blendex and OMMT synergistically improved the mechanical properties of PVC. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 286–295, 2004     

Solution and aqueous miniemulsion polymerization of vinyl chloride mediated by a fluorinated xanthate

Solution and aqueous miniemulsion polymerizations of vinyl chloride (VC) mediated by (3,3,4,4,5,5,6,6,7,7,8,8,8‐tridecafluorooctyl‐2‐((ethoxycarbonothioyl)thio) propanoate) (X1) were studied. The living characters of X1‐mediated solution and miniemulsion polymerizations of VC were confirmed by polymerization kinetics. The miniemulsion polymerization exhibits higher rate than solution polymerization. Final conversions of VC in the reversible addition‐fragmentation chain transfer (RAFT) miniemulsion polymerization reach as high as 87% and are independent of X1 concentration. Initiation process of X1‐mediated RAFT miniemulsion polymerization is controlled by the diffusion–adsorption process of prime radicals. Due to the heterogeneity of polymerization environments and concentration fluctuation of RAFT agent in droplets or latex particles, PVCs prepared in RAFT miniemulsion exhibit relatively broad molecular weight distribution. Furthermore, chain extensions of living PVC (PVC‐X) with VC, vinyl acetate (VAc), and N‐vinylpyrrolidone (NVP) reveal that PVC‐X can be reinitiated and extended, further confirming the living nature of VC RAFT polymerization. PVC‐b‐PVAc diblock copolymer is successfully synthesized by the chain extension of PVC‐X in RAFT miniemulsion polymerization. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2092–2101     

Influence of a mixing solvent with tetrahydrofuran and N,N‐dimethylformamide on electrospun poly(vinyl chloride) nonwoven mats

We evaluated the effects of the solvent composition with respect to the solution concentration, applied electric field, and tip‐to‐collector distance on the morphology of electrospun poly(vinyl chloride) (PVC) fibers. The solvent volume ratio was strongly correlated with the diameter of the electrospun fibers with respect to the other processing parameters. Electrospun PVC fibers dissolved in tetrahydrofuran (THF) had diameters ranging from 500 nm to 6 μm; those dissolved in N,N‐dimethylformamide (DMF) had an average diameter of 200 nm. The diameters of the electrospun fibers were obtained from narrow to broad distributions with the solvent composition. Also, the diameters of fibers electrospun from a mixed solvent of THF and DMF were less than 1 μm. The mechanical properties of electrospun PVC nonwoven mats depended on the fiber orientation and linear velocity of the drum surface. With increasing linear velocity of the drum surface, electrospun PVC fibers were arranged toward the machine direction, and the dimensions of the spiral path were shorter. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2259–2268, 2002     

Biodegradation of plasticized poly(vinyl chloride) containing cellulose

The plasticized poly(vinyl chloride) (PVC‐P) and its blend with cellulose (PVC‐P/cell) were prepared by means of extrusion. The samples were then biodegraded in forest soil as well as in soil enriched with cellulolytic microorganisms. Moreover, the samples were vaccinated with chosen species of fungi whose direct effect on polymer was then observed. The course of biodegradation was monitored in terms of, and by means of the following: weight loss, carbon dioxide evolved, attenuated total reflectance infrared (FTIR‐ATR) spectroscopy, gel permeation chromatography (GPC), as well as visual and microscopic observation (OM, SEM). The mechanical properties of samples were studied using the standard tensile tests. It was found that biodegradation in soil occurs in PVC‐P and this process is accelerated in the composition of PVC‐P with cellulose. The biodecomposition yield of PVC‐P/cellulose blends (calculated as relative percentage weight loss) is several dozen times higher than that of PVC‐P. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 903–919, 2007     

Correlation between the tacticity and content of labile nondefect structures in poly(vinyl chloride)

The content of mm isotactic triads taking the GTTG^? conformation for samples of poly(vinyl chloride) (PVC) fractions of different tacticities was measured through a substitution reaction with sodium benzenethiolate. This quantity changed linearly with the ratio of rmmmrx to mmmmrx (x = m or r), as accurately determined by ¹³C NMR spectroscopy. In a comparison of this correlation and that obtained between the thermal degradation stability and overall isotactic content, as studied previously, some novel evidence for the GTTG^? conformation of a few mm triads, termini of isotactic sequences no shorter than one heptad as specific labile sites in PVC, was obtained. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3944–3949, 2002     

Studies of photooxidative degradation of poly(vinyl chloride)/poly(ethylene oxide) blends

The photooxidative degradation of blends (in a full range of compositions) of amorphous poly(vinyl chloride) (PVC) with semicrystalline poly(ethylene oxide) (PEO) in the form of thin films is investigated using absorption spectroscopy (UV–visible and Fourier transform infrared) and atomic force microscopy (AFM). The amount of insoluble gel formed as a result of photocrosslinking is estimated gravimetrically. It is found that the PVC/PEO blendsí susceptibility to photooxidative degradation differs from that pure of the components and depends on the blend composition and morphology. Photoreactions such as degradation and oxidation are accelerated whereas dehydrochlorination is retarded in blends. The photocrosslinking efficiency in PVC/PEO blends is higher than in PVC; moreover, PEO is also involved in this process. AFM images showing the lamellar structure of semicrystalline PEO in the blend lead to the conclusion that the presence of PVC does not disturb the crystallization process of PEO. The changes induced by UV irradiation allow the observation of more of the distinct PEO crystallites. This is probably caused by recrystallization of short, more mobile chains in degraded PEO or by partial removal of the less stable amorphous phase from the film surface. These results confirm previous information on the miscibility of PVC with PEO. The mechanism of the interactions between the components and the blend photodegradation are discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 585–602, 2004     

Independence of the brittle–ductile transition from the rubber particle size for impact‐modified poly(vinyl chloride)

A series of acrylic impact modifiers (AIMs) with different particle sizes ranging from 55.2 to 927.0 nm were synthesized by seeded emulsion polymerization, and the effect of the particle size on the brittle–ductile transition of impact‐modified poly(vinyl chloride) (PVC) was investigated. For each AIM, a series of PVC/AIM blends with compositions of 6, 8, 10, 12, and 15 phr AIM in 100 phr PVC were prepared, and the Izod impact strengths of these blends were tested at 23 °C. For AIMs with particle sizes of 55.2, 59.8, 125.2, 243.2, and 341.1 nm, the blends fractured in the brittle mode when the concentration of AIM was lower than 10 phr, whereas the blends showed ductile fracture when the AIM concentration reached 10 phr. It was concluded that the brittle–ductile transition of the PVC/AIM blends was independent of the particle size in the range of 55.2–341.1 nm. When the particle size was greater than 341.1 nm, however, the brittle–ductile transition shifted to a higher AIM concentration with an increase in the particle size. Furthermore, the critical interparticle distance was found not to be the criterion of the brittle–ductile transition for the PVC/AIM blends. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 696–702, 2006     

Poly(propylene imine) dendrimers as plasticizers for polyvinyl chloride

Fourth and fifth generation poly(propylene imine) dendrimers and methyl and benzyl functionalized copolymers of these dendrimers are solution blended with poly(vinyl chloride) (PVC). The methyl‐derivative copolymer is observed to be dispersed in PVC as judged by optical and dynamic scanning calorimetry measurements. This dispersion leads to a substantial reduction in the glass transition temperature and a commensurate plasticization effect, demonstrating that functionalized dendrimer copolymers can successfully plasticize semicrystalline polymers. This plasticization is thought to occur as a result of additional free volume from the highly branched structure of the dendrimer. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1970–1975, 2007     

Structure of reactively extruded rigid PVC/PMMA blends

A novel route for producing polymer blends by reactive extrusion is described, starting from poly (vinyl chloride)/methyl methacrylate (PVC/MMA) dry blend and successive polymerization of MMA in an extruder. Small angle X‐ray scattering (SAXS) measurements were applied to study the monomer's mode of penetration into the PVC particles and to characterize the supermolecular structure of the reactive poly(vinyl chloride)/poly(methyl methacrylate) (PVC/PMMA) blends obtained, as compared to the corresponding physical blends of similar composition. These measurements indicate that the monomer molecules can easily penetrate into the PVC sub‐primary particles, separating the PVC chains. Moreover, the increased mobility of the PVC chains enables formation of an ordered lamellar structure, with an average d‐spacing of 4.1 nm. The same characteristic lamellar structure is further detected upon compression molding or extrusion of PVC and PVC/PMMA blends. In this case the mobility of the PVC chains is enabled through thermal energy. Dynamic mechanical thermal analysis (DMTA) and SAXS measurements of reactive and physical PVC/PMMA blends indicate that miscibility occurs between the PVC and PMMA chains. The studied reactive PVC/PMMA blends are found to be miscible, while the physical PVC/PMMA blends are only partially miscible. It can be suggested that the miscible PMMA chains weaken dipole–dipole interactions between the PVC chains, leading to high mobility and resulting in an increased PVC crystallinity degree and decreased PVC glass transition temperature (T_g). These phenomena are shown in the physical PVC/PMMA blends and further emphasized in the reactive PVC/PMMA blends. Copyright © 2005 John Wiley & Sons, Ltd.     

The effects of solvent type and aging on structural development in poly(vinyl chloride) thermoreversible gels

We investigated the effects of solvent type (mono‐ester vs. di‐ester solvent) and aging on the structural development in the poly(vinyl chloride)/butyl benzoate (PVC/BB) and PVC/dibutyl phthalate(DBP) gels, as well as on their viscoelastic and mechanical behaviors. It was found that aged PVC/DBP gels held at RT for 7 days exhibit an improvement of about 100% in storage modulus (G′) compared to fresh gels, with a sudden drop in G′ around 50 °C, whereas the storage moduli of the PVC/BB gels decrease monotonically with temperature, irrespective of the postaging time. These different behaviors of the PVC/BB and PVC/DBP gels arise mainly because of the difference in the network structure produced by the formation of the polymer‐solvent complex between the C?O groups of the solvent and the polarized hydrogen moieties of PVC, as was confirmed with small angle X‐ray scattering and uniaxial tensile experiments. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 263–271, 2008