Synthesis and characterization of thermoresponsive poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide-co-<Emphasis Type="Italic">N</Emphasis>-hydroxymethylacrylamide-co-2-hydroxyethyl methacrylate) hydrogels

Thermoresponsive hydrogels based on N-isopropylacrylamide, N-hydroxymethylacrylamide, and 2-hydroxyethyl methacrylate, poly(NIPAM–co-NHMAAm–co-HEMA), have been synthesized and their swelling—deswelling behavior studied as a function of NIPAM concentration, NIPAM/NHMAAm and NIPAM/HEMA mole ratio, and total monomer concentration. Copolymers varying in composition have been obtained by redox copolymerization of these three monomers. Temperature has been changed in the ranges from 4 to 70 °C at fixed pH and total ionic strength. Equilibrium swelling ratio, dynamic swelling ratio, and dynamic deswelling ratio were evaluated for all hydrogel systems. The equilibrium swelling ratios of the copolymeric gels decrease with increasing NHMAAm and HEMA content. The formation of the intermolecular hydrogen bonding between hydroxyl and amido groups decreases the hydrophilic group numbers of the gel and the affinity of the gel towards water decreases. The copolymer gels also showed rapid volume transitions with time. The time required for equilibrium shrinking increased with increasing NHMAAm and HEMA content in the gel.     

Spectral interpretation of thermally irreversible recovery of poly(N-isopropylacrylamide-co-acrylic acid) hydrogel

The thermally induced volume phase transition process of poly(N-isopropylacrylamide-co-acrylic acid) (PNIPAM-co-AA) hydrogel is studied using FT-IR spectroscopy in combination with the perturbation correlation moving window (PCMW) technique and two-dimensional correlation spectroscopy (2Dcos) analysis. According to PCMW spectra analysis, an elevation of volume phase transition temperature (VPTT) due to an extra equilibrium of repulsive electrostatic interactions of acrylic acid moieties in hydrogel from 34 °C to ca. physiological temperature (37 °C) is determined. 2Dcos helps us to conclude that the dehydration of hydrogel responds earlier in the process of network collapse than hydrogen bond variations of AA and NIPAM moieties during heating, while the hydrogen bonds of NIPAM and AA moieties change before the network swelling in the cooling process. Furthermore, relatively stable inner hydrogen bonds of AA moieties restrict the complete expansion of PNIPAM-co-AA hydrogel, resulting in a unique irreversible recovery during cooling.     

含金刚烷基的N-异丙基丙烯酰胺共聚物水凝胶的制备和性能研究

合成了含金刚烷基的甲基丙烯酸金刚烷酯(AdMA)疏水单体,并通过与N-异丙基丙烯酰胺(NIPAM)共聚,制备了温敏性的(P(NIPAM-co-AdMA))共聚物水凝胶.用傅里叶变换红外光谱仪(FTIR)表征了凝胶的化学结构,用环境扫描电镜(ESEM)对凝胶断层结构的形貌进行了观察,用DSC测试了凝胶的体积相转变温度(LCST),并研究了共聚水凝胶的溶胀性能.结果表明,共聚物水凝胶的LCST能够高效地通过改变疏水单体的含量来调节,在实验所考察的范围内,LCST随AdMA含量的增加而线性降低;疏水单体的含量对凝胶的孔洞结构和溶胀性能存在一最优值,在最优的单体配比下,水凝胶具有均匀规整的大孔结构和超快的响应速率.如疏水单体含量为3%(AdMA∶NIPAM=3%)的共聚物水凝胶具有如渔网般均匀的多孔结构,当发生去溶胀时,在5min内就可以失去92%的水,不到10min的时间就可以完全达到去溶胀平衡,水保留率在4%以下.     

温度及pH敏感性水凝胶的合成及性能研究

乙烯基吡咯烷酮与丙烯酸共聚物／聚丙烯酸β-羟基丙酯互穿网络水凝胶具有温度及PH双重敏感特性。经验证,在蒸馏水中,聚丙烯酸β－羟基丙酯与丙烯酸间存在络合作用,在缓溶液中,没有这样络合作用。     

Preparation and characterization of a novel IPN hydrogel memberane of poly(N-isopropylacrylamide)/carboxymethyl chitosan (PNIPAAM/CMCS)

A novel type of interpenetrating polymer networks (IPN) hydrogel membrane of poly(N-isopropylacrylamide)/carboxymethyl chitosan (PNIPAAm)/(CMCS) was prepared, and the effects of the feed ratio of components, swelling medium and irradiation dose on the swelling and deswelling properties of the hydrogel was systematically studied. The results showed that the introduction of CMCS did not shift the LCST (at 32 °C), which is similar to the pure PNIPAAm. The lowest swelling ratio was at pH 2. There was little influence of irradiation dose on the thermo- and pH-sensitivity of the IPN hydrogel, increasing dose only decreased the swelling ratio. The PNIPAAm:CMCS=1:4 w/w hydrogel was not thermo-sensitive in distilled water, whereas it showed a discontinuous volume phase transition in pH 2 and a continuous one in pH 8 buffer. Consequently, a combination of pH and temperature can be coupled to control the responsive behavior of these hydrogels.     

温度/pH敏感性接枝共聚物水凝胶P(DMAEMA-g-NIPAM)的 合成及性质研究

利用大分子单体技术, 采用自由基溶液聚合合成了温度/pH敏感性聚甲基丙烯酸-N,N-二甲氨基乙酯接枝聚N-异丙基丙烯酰胺[P(DMAEMA-g-NIPAM)]水凝胶. 用红外光谱及扫描电镜对凝胶的组成及形貌进行了表征. 凝胶的去溶胀和溶胀动力学研究表明, 所合成的凝胶具有温度和pH敏感性. 与传统的聚丙烯酸系水凝胶相比, P(DMAEMA-g- NIPAM)具有相反的pH敏感性; P(DMAEMA-g-NIPAM)凝胶在55 ℃时具有较快的去溶胀速率, 随着凝胶中接枝链PNIPAM量的增加, 凝胶的去溶胀速率加快.     

pH- and temperature-responsive hydrogels of acrylic acid,N-isopropylacrylamide and a non-ionic surfmer: phase behaviour,swelling properties and drug release

Copolymer hydrogels composed of N-isopropylacrylamide (NIPAM), acrylic acid (AA) and the non-ionic surfactant monomer (surfmer) ω-methoxy poly(ethylene oxide)₄₀undecyl-α-methacrylate (PEO-R-MA-40) were prepared and studied with regard to swelling behaviour and drug release behaviour. The gels were prepared upon γ-irradiation of the corresponding aqueous comonomer solution in a one-step reaction. Transparent, stable hydrogels were obtained. Studies of light transmission indicate a dual pH- and T-responsive behaviour, which originates from the AA and NIPAM content of the gels, respectively. Presence of large amounts of surfmer increases the phase transition temperature, but also increases the network density, which lowers the permeability of the gels. Swelling properties and release of ibuprofen (Ibu) were studied in simulated gastric fluid (SGF, pH 1) and phosphate buffer solution (PBS, pH 6.8). It was found that swelling and release are controlled by the nature and quantity of comonomers, pH, temperature and ionic strength of the aqueous phase. Swollen gels shrink in SGF and PBS, whereas dry gels exhibit a strong swelling both in SGF and PBS. Copolymer gels of AA and surfmer exhibit a strong, linear release of Ibu in SGF and PBS. If NIPAM is copolymerized in the gel, the drug release is decelerated in SGF probably due to formation of hydrogen bonds between NIPAM and Ibu at low pH. For example, a gel composed of 10 % (w/w) NIPAM, 1 % (w/w) AA and 1.5 % (w/w) surfmer exhibits a release of 10 % within 2 h in SGF and 58 % within 20 h in PBS.     

一种快速响应电场敏感多孔水凝胶的合成及其性能研究

以4-乙酰基丙烯酰乙酸乙酯(AAEA)、2-丙烯酰胺基-2-甲基-1-丙磺酸(AMPS)为单体,不同分子量的聚乙二醇(PEG)为成孔剂,通过自由基溶液聚合法,合成了新型多孔快速响应电场敏感性水凝胶.结果表明,成孔剂PEG被洗脱后在凝胶内部形成了互相贯穿的孔洞结构,孔径在30～120μm之间.以PEG6000为成孔剂致孔后的多孔凝胶溶胀速率和消溶胀速率最快,在去离子水中30s达到溶胀平衡,在0.1mol/L的NaCl溶液中40min达到消溶胀平衡;电场作用下凝胶的消溶胀速度大大加快,12min内即可达到平衡.凝胶中AMPS含量的增多会加快凝胶在电场中的响应速度;而高温下,随着AAEA含量的增加,凝胶内部疏水基团增多并收缩产生大量的疏水微区,限制了凝胶内部水分的持续排出,因此n(AAEA)∶n(AMPS)=3∶1的凝胶4min内即可排出表面水分达到消溶胀平衡,可保水率却高达75%.同时,增大电解液的pH值、浓度以及提高电解电压,均会加快凝胶的消溶胀行为.     

Effect of Pore-Forming Agent Type on Swelling Properties of Macroporous Poly(N-[3-(dimethylaminopropyl)]-methacrylamide-co-acrylamide) Hydrogels

Macroporous poly(N-[3-(dimethylaminopropyl)]methacrylamide-co-acrylamide) [P(DMAPMA-co-AAm)] hydrogels were prepared by free-radical crosslinking copolymerization of corresponding monomers in water using two different pore-forming agents such as hydroxypropyl celluose (HPC) and poly(ethylene glycol) (PEG). The effect of these pore-forming agents on the volume phase transition temperature (VPT-T), interior morphology and swelling/deswelling kinetics of the P(DMAPMA-co-AAm) hydrogels was investigated. Scanning electron micrographs revealed that the interior network structure of the hydrogel matrix became more porous due to the presence of HPC or PEG pore-forming agents. The more porous matrix provided numerous water channels for water diffusion in or out of the matrix and, therefore, an improved response rate to the external stimuli. Particularly, due to its unique macroporous structure, the PEG-modified hydrogel showed a tremendously faster response to the external temperature changes during deswelling process and the swelling process at 22°C.     

“Smart” carboxymethylchitosan hydrogels crosslinked with poly(N-isopropylacrylamide) and poly(acrylic acid) for controlled drug release

Carboxymethylchitosan (CMC) hydrogels containing thermo-responsive poly(N-isopropylacrylamide) (poly(NIPAAm)) and pH-responsive poly(acrylic acid) (poly(AA)) were prepared via a free radical polymerization in the presence of hexamethylene-1,6-di-(aminocarboxysulfonate) crosslinking agents. A proper ratio of CMC to NIPAAm and AA used in the reaction was investigated such that the thermo- and pH-responsive properties of the hydrogels were obtained. Water swelling of the hydrogels was improved when the solution pH was in basic conditions (pH 10) or the temperature was below its lower critical solution temperature (LCST). Effects of the change in solution temperature and pH on water swelling properties of the hydrogel as well as the releasing rate of an entrapped drug were also investigated. The hydrogels were not toxic and showed antibacterial activity against Straphylococcus aureus (S. aureus). The pH- and thermo-responsive properties of this novel “smart” hydrogel might be efficiently used as dual triggering mechanisms in controlled drug release applications.     

温度敏感聚(N-异丙基丙烯酰胺-co-甲基丙烯酰氧乙基二甲基辛基溴化铵)水凝胶的溶胀性能研究

由于改变亲水／疏水单体比值、与离子单体共聚心、改变凝胶内部结构等均可不同程度地调整温敏水凝胶的溶胀性能,本研究选择一种既含疏水烷基又含季铵盐正离子型亲水基团的两亲性单体——甲基丙烯酰氧乙基二甲基辛基溴化铵（ADMOAB）,结构如示意图1所示．与N-异丙基丙烯酰胺（NIPAM）聚合,制备了P（NIPAM-co-ADMOAB）共聚水凝胶,以便在引入离子型结构单元的同时,改变凝胶体系中亲水／疏水单体比值,避免单纯增加疏水单体引起的水凝胶溶胀性降低问题,并考察了ADMOAB对水凝胶溶胀性能的影响,对该类水凝胶迄今鲜见相关文献报道．该研究对进一步了解水凝胶的构效关系、探索有效控制溶胀性能的途径具有积极意义．     

Swelling behaviors of thermoresponsive hydrogels cross-linked with acryloyloxyethylaminopolysuccinimide

Based on a biodegradable cross-linker, acryloyloxyethylaminopolysuccinimide (AEA-PSI), a series of looser cross-linked poly(N-isopropylacrylamide-co-acrylic acid) [P(NIPAAm-co-AAc)] hydrogels were prepared, and their water content, swelling/deswelling kinetics, and the morphology of the gels were investigated. The swelling behaviors of AEA-PSI-cross-linked P(NIPAAm/AAc) hydrogels were investigated in Dulbecco’s phosphate-buffered saline (pH = 7.4), in the distilled water, and in the simulated gastric fluids (pH = 1.2), respectively. The water contents of the hydrogels were controlled by the monomer molar ratio of NIPAAm/AAc, swelling media, and the temperature. In the swelling kinetics, all the dried hydrogels exhibited fast swelling behavior, and the swelling ratios were influenced significantly by the amounts of AEA-PSI and AAc content. The deswelling kinetics of the hydrogel were independent of the content of AAc and cross-linker. Lastly, the morphology of the hydrogels was estimated by the field scan electron microscopy.     

Preparation and characterization of temperature- and pH-sensitive hemicellulose-containing hydrogels

In this work, a hemicellulose-containing hydrogel was synthesized. As the first step, a temperature- and pH-sensitive copolymer was synthesized from itaconic acid and N-isopropylacrylamide (NIPAAm). Then the hydrogel was prepared by reacting the copolymer with acylated hemicellulose and polyvinyl alcohol. The morphology, compressive strength, thermal stability, swelling/deswelling behavior, drug-release behavior performances of the hydrogels were investigated. The lower critical solution temperature of the hydrogels varied in 34–44°C when the NIPAAm and itaconic acid mass ratios ranged in 100/0–90/10. Both temperature and pH had a significant influence on equilibrium swelling ratio of hydrogels. The equilibrium swelling ratio increased with pH, but decreased with temperature. Cytocompatibility assay demonstrated that this hemicellulose-containing hydrogel was biocompatible. The release process of salicylic acid suggested that this hydrogel had a potential use in controlled drug release.     

Synthesis and characterization of thermoresponsive isopropylacrylamide-acrylamide hydrogels

In this study, hydrogels of poly(N-isopropylacrylamide-co-acrylamide) having a thermoresponsive character were prepared by a redox polymerization method. NIPAM-co-AAm hydrogels with different thermoresponsive properties were obtained by changing the initial NIPAM/AAm mole ratio and crosslinker concentration.Equilibrium-swelling ratio, dynamic swelling ratio and dynamic deswelling ratio were evaluated for all hydrogel systems. The fast shrinking was observed with all gels. The time required for equilibrium shrinking increased with the increase of acrylamide content in the gel.     

Rapid swelling and deswelling in cryogels of crosslinked poly(N-isopropylacrylamide-co-acrylic acid)

Thermally sensitive hydrogels of poly[N-isopropylacrylamide (NIPA)-co-acrylic acid (AA)] hydrogels with N,N-methylene bisacrylamide (BIS) as crosslinker have been synthesized via a two-step procedure in which, the initial polymerisation is conducted for various times at 18 °C, this step being followed by polymerisation for one fixed time at −22 °C. The gravimetrically determined rates of swelling/deswelling for these materials termed “cryogels” prepared by this two-step polymerisation are much higher than those for the same type of hydrogel prepared via conventional methods (30 °C for 24 h). For example the time for the former xerogel to take up 70% of its final water content at 25 °C is just 18 min, compared with a time 300 min for the latter to attain the same uptake of water. During deswelling (shrinking) at 50 °C, which is above the lower critical temperature, the hydrogel loses 60 and 90 wt% water in 1 and 10 min respectively, compared to a timescale for the corresponding crosslinked copolymers prepared by conventional methods of about 100 min for 50 wt% water loss. A third type of hydrogel was made by a cold treatment (CT), for which the hydrogel prepared by conventional polymerization was stored in the frozen state. The swelling rate of these CT xerogels was the same as that for xerogels prepared by conventional polymerization, but the deswelling rate of the former was higher than that of the latter; for example, during deswelling, a loss of 90% water is attained within a few minutes.Scanning electron microscopy, digital photographs and flotation experiments together with swelling ratio studies reveal that the polymeric network of cryogel produced by the two-step polymerization method is characterized by an open structure with more pores and higher swelling ratio but lower mechanical strength compared to the conventional hydrogels. Such rapid response hydrogels have potential applications in separation and drug release technologies for example.     

Synthesis and characterization of thermo-sensitive poly (N-isopropylacrylamide) hydrogel with fast response rate

Thermo-sensitive poly (N-isopropylacrylamide) (PNIPA) hydrogel with fast response rate was prepared by polymerizing N-isopropylacrylamide (NIPA) in an aqueous hydroxyl-propyl-methyl cellulose solution. The volume phase transition temperature of PNIPA hydrogels was characterized by differential scanning calorimetry (DSC), and the surface morphology was observed by scanning electron microscopy (SEM). The swelling ratios of the hydrogels at different temperatures were measured. Furthermore, the deswelling kinetics of the hydrogels was also studied by measuring their water retention capacity. In comparison with a conventional PNIPA hydrogel prepared in water, the hydrogel synthesized in aqueous hydroxyl-propyl-methyl cellulose solution has higher swelling ratios at temperatures below the lower critical solution temperature and exhibits a much faster response rate to temperature changes. For example, the hydrogel made in aqueous hydroxyl-propyl-methyl cellulose solution lost 89% water within 1 min and about 93% water in 4 min, whereas the conventional hydrogel lost only about 66% water in 15 min from the deswelling measurement in similar conditions. Translated from Chinese Journal of Applied Chemistry, 2006, 23(6): 581–585 (in Chinese)     

Rapid swelling and deswelling in cryogels of crosslinked poly(N-isopropylacrylamide-co-acrylic)

Thermally sensitive hydrogels of poly[N-isopropylacrylamide (NIPA)-co-acrylic(AA)] hydrogels with N,N-methylene bisacrylamide (BIS) as crosslinker have been synthesised via a two-step procedure in which, the initial polymerisation is conducted for various times at 18 °C, this step being followed by polymerisation for one fixed time at −22 °C. The gravimetrically determined rates of swelling/deswelling for these materials termed “cryogels” prepared by this two-step polymerisation are much higher than those for the same type of hydrogel prepared via conventional methods (30 °C for 24 h). For example the time for the former xerogel to take up 70% of its final water content at 25 °C is just 18 min, compared with a time 300 min for the latter to attain the same uptake of water. During deswelling (shrinking) at 50 °C, which is above the lower critical temperature, the hydrogel loses 60 and 90 wt.% water in 1 and 10 min respectively, compared to a timescale for the corresponding crosslinked copolymers prepared by conventional methods of about 100 min for 50 wt.% water loss. A third type of hydrogel was made by a cold treatment (CT), for which the hydrogel prepared by conventional polymerisation was stored in the frozen state. The swelling rate of these CT xerogels was the same as that for xerogels prepared by conventional polymerisation, but the deswelling rate of the former was higher than that of the latter; for example, during deswelling, a loss of 90% water is attained within a few minutes.Scanning electron microscopy, digital photographs and flotation experiments together with swelling ratio studies reveal that the polymeric network of cryogel produced by the two-step polymerisation method is characterised by an open structure with more pores and higher swelling ratio but lower mechanical strength compared to the conventional hydrogels. The polymerisation was taking place on moderate freezing condition and the hydrogel was stored in a frozen state and subsequent thawing of polymer to be very useful the acceleration the response rate of this kind hydrogels. Such rapid response hydrogels have potential applications in separation and drug release technologies for example.     

Ion-specific swelling of poly(styrene sulfonic acid) hydrogel

Poly(styrene sulfonic acid) (PSSA) hydrogel was prepared by radiation crosslinking using methyl N,N-bis-acrylamide as crosslinker. Effects of ion species and concentration on the swelling behavior of PSSA hydrogel were investigated in aqueous solution of selected anions (F-, Cl-, Br-, SCN-), cations (Li+, Na+, K+, Ca2+), and hydrophobic ions (tetramethylammonium cation TMA+, tetrabutylammonium cation TBA+, and dodecyltrimethylammonium cation TAB+). The deswelling extent of PSSA hydrogel follows anion Hofmeister series, i.e., SCN- < Br- < Cl- < F-, in solutions containing selected anions and K+ as counterion up to a concentration of 2 mol.L(-1). On the contrary, the deswelling extent of PSSA hydrogel in solutions containing selected cations and Cl- follows the sequence of Li+ < Na+ < K+ < Ca2+, which is the reverse of the Hofmeister series except Ca2+. We have discussed the effects of ions on the hydrogen bonding through SO3- and phenyl ring in salt solutions at low and high concentrations. Other interactions, such as the cation-pi and hydrophobic interactions, also contributed to the ion-specific swelling of PSSA hydrogel. The proposed mechanism was further elucidated by FTIR and NMR analysis. A very specific deswelling-reswelling phenomenon of PSSA hydrogel in KF solution has been observed and ascribed to the F- binding to phenyl ring through a specific interaction.     

Synthesis of the Functional Hydrogels: Poly(N-isopropylacrylamide) Threaded onto the PEG Backbones Via RAFT

Functional poly(N-isopropylacrylamide) (PNIPAM) hydrogels were prepared by reversible addition fragmentation chain transfer (RAFT) polymerization of NIPAM in the presence of four-arm poly(ethylene glycol) (4A-PEG) as backbone and 4-cyanopentanoic acid dithiobenzoate functional α -cyclodextrin threaded onto the PEG as chain transfer reagent (CTA).The structure of the hydrogels was characterized in detail with FTIR techniques. The analytical results demonstrated that α -cyclodextrin remains in as-obtained hydrogels. The swelling behavior was investigated and the functional hydrogels (functional gels) showed accelerated shrinking kinetics and higher swelling ratio comparing with conventional hydrogel (CG). It could be attributed to the presence of dangling chains. The hydrogel exhibited rapid swelling and deswelling kinetics. In principle, the hydrogel might find a number of applications including an on-off system and drug delivery systems.     

Inverse opal pH sensors with various protic monomers copolymerized with polyhydroxyethylmethacrylate hydrogel

pH sensitive inverse opal sensors were synthesized using various vinyl monomers containing acidic or basic substituents. Acrylic acid (AA), vinylphosphonic acid (VPA), vinylimidazole (VI), and dimethylaminoethylmethacrylic acid (DMAEMA) were respectively copolymerized with hydroxyethylmethacrylate (HEMA), the building block monomer of the hydrogel via UV-initiated photopolymerization. Opal templating and subsequent template removal enabled the fabrication of four inverse opal (IO) hydrogel colorimetric sensors, which responded to pH in different fashions. pH-dependent swelling of the IO hydrogel induced the red-shift of the diffracted color. The sensors containing AA or VPA, the proton donating monomers showed the color shifts from green to red with pH increase due to the increased concentration of carboxylate anions bound to the hydrogel. Diprotic VPA sensor exhibited two-step increases of diffracted wavelengths at its pK_a1 and pK_a2 respectively. The sensors containing proton acceptors, VI and DMAEMA showed the pH-dependent color changes in an opposite way to the AA sensor and the VPA sensor since their ionizations take place by lowering pH due to the protonation at the amino groups. The shapes of pH response curves of VI and DMAEMA sensors were similar but pK_bs were different from each other. Optical diffraction responses of four sensors were compared with the calculated concentration ratios of the ionized species to the total monomer with pH variation, and a deswelling effect in the vicinities of pK_as of phosphate buffer on the swelling response could be explained by shrinkage of PHEMA hydrogel under high ionic environment. In addition, copolymerization of AA, VPA and HEMA was carried out which resulted in a pH sensor exhibiting a wider range of pH for color change.