Tailoring thermoresponsive nanostructured poly(N-isopropylacrylamide) hydrogels made with poly(acrylamide) nanoparticles

The thermoresponsive behavior and mechanical properties of nanostructured hydrogels, which consist of poly(acrylamide) nanoparticles embedded in a cross-linked poly(N-isopropylacrylamide) hydrogel matrix, are reported here. Nanostructured hydrogels exhibit a tuned volume phase transition temperature (T _VPT), which varies with nanoparticle content in the range from 32 up to 39–40 °C. Moreover, larger equilibrium water uptake, faster swelling and de-swelling rates, and larger equilibrium swelling at 25 °C were obtained with nanostructured hydrogels compared with those of conventional ones. Elastic and Young’s moduli were larger than those of conventional hydrogels at similar swelling ratios. The tuned T _VPT and the de-swelling rate were predicted with a modified Flory–Rehner equation coupled with a mixing rule that considers the contribution of both polymers. These behaviors are explained by a combination of hydrophilic/hydrophobic interactions and by the controlled inhomogeneities (nanoparticles) introduced by the method of synthesis.     

Aqueous solution behavior of comb‐shaped poly(2‐ethyl‐2‐oxazoline)

A series of comb polymers consisting of a methacrylate backbone and poly(2‐ethyl‐2‐oxazoline) (PEtOx) side chains was synthesized by a combination of cationic ring‐opening polymerization and reversible addition–fragmentation chain transfer polymerization. Small‐angle neutron scattering (SANS) studies revealed a transition from an ellipsoidal to a cylindrical conformation in D₂O around a backbone degree of polymerization of 30. Comb‐shaped PEtOx has lowered T_g values but a similar elution behavior in liquid chromatography under critical conditions in comparison to its linear analog was observed. The lower critical solution temperature behavior of the polymers was investigated by turbidimetry, dynamic light scattering, transmission electron microscopy, and SANS revealing decreasing T_cp in aqueous solution with increasing molar mass, the presence of very few aggregated structures below T_cp, a contraction of the macromolecules at temperatures 5 °C above T_cp but no severe conformational change of the cylindrical structure. In addition, the phase diagram including cloud point and coexistence curve was developed showing an LCST of 75 °C of the binary mixture poly[oligo(2‐ethyl‐2‐oxazoline)methacrylate]/water. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and characterization of novel thermoresponsive‐co‐biodegradable hydrogels composed of N‐isopropylacrylamide,poly(L‐lactic acid), and dextran

A series of novel multifunctional hydrogels that combined the merits of both thermoresponsive and biodegradable polymeric materials were designed, synthesized, and characterized. The hydrogels were copolymeric networks composed of N‐isopropylacrylamide (NIPAAM) as a thermoresponsive component, poly(L‐lactic acid) (PLLA) as a hydrolytically degradable and hydrophobic component, and dextran as an enzymatically degradable and hydrophilic component. The chemical structures of the hydrogels were characterized by an attenuated total reflection–Fourier transform infrared spectroscopy (ATR–FTIR) technique. The hydrogels were thermoresponsive, showing a lower critical solution temperature (LCST) at approximately 32 °C, and their swelling properties strongly depended on temperature changes, the balance of the hydrophilic/hydrophobic components, and the degradation of the PLLA component. The degradation of the hydrogels caused by hydrolytic cleavage of ester bonds in the PLLA component was faster at 25 °C below the LCST than at 37 °C above the LCST, determined by the ATR–FTIR technique. Due to their multifunctional properties, the designed hydrogels show great potential for biomedical applications, including drug delivery and tissue engineering. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5054–5066, 2004     

Synthesis and characterization of thermoresponsive hydrogels cross-linked with chitosan

Hydrogels composed of N-isopropylacrylamide (NIPAAm) and acrylic acid (AAc) were prepared by redox polymerization with degradable chitosan cross-linkers. Chitosan degradable cross-linkers were synthesized by the acrylation of the amine groups of glucosamine units within chitosan and characterized with ¹H NMR. With the chitosan cross-linkers, loosely cross-linked poly(N-isopropylacryamideco-acrylic acid) [P(NIPAAm-co-AAc)] hydrogels were prepared, and their phase transition behavior, lower critical solution temperature (LCST), water content and degradation properties were investigated. The chitosan cross-linked P(NIPAAm-co-AAc) hydrogels were pliable and transparent at room temperature. The LCST could be adjusted at 32∼39°C by alternating the feed ratio. Swelling was influenced by NIPAAm/AAc monomer ratio, cross-linking density, swelling media, and temperature. All hydrogels with different feeding ratios contained more than 95% water at 25°C in the ultra pure water and phosphate-buffered saline (PBS, pH = 7.4 ± 0.1), and had a prospective swelling in the simulated gastric fluids (SGF, pH = 1.2) > 72.54%. In degradation studies, breakdown of the chitosan cross-linked P(NIPAAm-co-AAc) hydrogels was dependent on the cross-linking density. The chitosan cross-linked P(NIPAAm-co-AAc) hydrogels which can be tailored to create environmentally-responsive artificial extracellular materials have great potential for future use.      

Recognition‐Mediated Hydrogel Swelling Controlled by Interaction with a Negative Thermoresponsive LCST Polymer

Most polymeric thermoresponsive hydrogels contract upon heating beyond the lower critical solution temperature (LCST) of the polymers used. Herein, we report a supramolecular hydrogel system that shows the opposite temperature dependence. When the non‐thermosesponsive hydrogel NaphtGel, containing dialkoxynaphthalene guest molecules, becomes complexed with the tetra cationic macrocyclic host CBPQT⁴⁺, swelling occurred as a result of host–guest complex formation leading to charge repulsion between the host units, as well as an osmotic contribution of chloride counter‐ions embedded in the network. The immersion of NaphtGel in a solution of poly(N‐isopropylacrylamide) with tetrathiafulvalene (TTF) end groups complexed with CBPQT⁴⁺ induced positive thermoresponsive behaviour. The LCST‐induced dethreading of the polymer‐based pseudorotaxane upon heating led to transfer of the CBPQT⁴⁺ host and a concomitant swelling of NaphtGel. Subsequent cooling led to reformation of the TTF‐based host–guest complexes in solution and contraction of the hydrogel.     

Preparation and characterisation of thermoresponsive poly[(N-isopropylacrylamide-co-acrylamide-co-(hydroxyethyl acrylate)] microspheres as a matrix for the pulsed release of drugs

Despite the large number of publications and patents concerning pH/thermoresponsive polymers, few data are available concerning the preparation of thermoresponsive cross-linked microspheres from preformed polymers. Therefore, N-isopropylacrylamide-co-acrylamide-co-(2-hydroxyethyl acrylate) copolymers were obtained as a new thermoresponsive material with a lower critical solution temperature (LCST) around 36 degrees C, in phosphate buffer at pH 7.4, and with a cross-linkable OH group in their structure. The LCST value was determined both by UV spectroscopy and microcalorimetric analysis. These copolymers were solubilised in acidified aqueous solution below their LCST, dispersed in mineral oil, and transformed into stable microspheres by cross-linking with glutaraldehyde. The thermoresponsive microspheres were characterised by optical and scanning electron microscopy, degree of swelling, and water retention. The pore dimensions of the microspheres and the retention volumes of some drugs and typical compounds were evaluated at different temperatures by liquid chromatography. Indomethacin, as a model drug, was included in the microspheres by the solvent evaporation method. Finally, the influence of temperature and of temperature cycling on drug release was investigated.     

Synthesis and characterization of thermoresponsive hydrogels cross-linked with acryloyloxyethylaminopolysuccinimide

Biodegradable cross-linkers acryloyloxyethylaminopolysuccinimide (AEA-PSI) were obtained by microwave irradiation using maleic anhydride as materials. With AEA-PSI cross-linker, cross-linked poly(N-isopropylacrylamide-co-acrylic acid) [P(NIPAAm-co-AAc)] hydrogels were prepared, and their phase transition behavior, lower critical solution temperature (LCST), water content, thermodynamics stability, and enzymatic degradation properties were investigated. By alternating the NIPAAm/AAc molar ratio, hydrogels were synthesized to have LCST in the vicinity of 37 °C. The LCST of AEA-PSI-cross-linked P(NIPAAm-co-AAc) hydrogels was significantly influenced by monomer ratio of the NIPAAm/AAc but not by the cross-linking density within the polymer network. The water content of AEA-PSI-cross-linked P(NIPAAm-co-AAc) hydrogels was more than 90% even at 37 °C, which was controlled by the monomer molar ratio of NIPAAm/AAc, swelling media, and the cross-linking density. The thermodynamics stability was also characterized by thermogravimetry. In enzymatic degradation studies, breakdown of the AEA-PSI-cross-linked P(NIPAAm-co-AAc) hydrogels was dependent on the cross-linking density. Submitted to Colloid and Polymer Science, 2007-1-28.     

Novel poly(N‐isopropylacrylamide)/clay/poly(acrylamide) IPN hydrogels with the response rate and drug release controlled by clay content

Novel interpenetrating network (IPN) hydrogels (PNIPAAm/clay/PAAm hydrogels) based on poly(N‐isopropylacrylamide) (PNIPAAm) crosslinked by inorganic clay and poly(acrylamide) (PAAm) crosslinked by organic crosslinker were prepared in situ by ultraviolet (UV) irradiation polymerization. The effects of clay content on temperature dependence of equilibrium swelling ratio, deswelling behavior, thermal behavior, and the interior morphology of resultant IPN hydrogels were investigated with the help of Fourier transform infrared spectroscopy, differential scanning calorimeter (DSC), scanning electron microscope (SEM). Study on temperature dependence of equilibrium swelling ratio showed that all IPN hydrogels exhibited temperature‐sensitivity. DSC further revealed that the temperature‐sensitivity was weakened with increasing amount of clay. Study on deswelling behavior revealed that IPN hydrogels had much faster response rate when comparing with PNIPAAm/clay hydrogels, and the response rate of IPN hydrogels could be controlled by clay content. SEM revealed that there existed difference in the interior morphology of IPN hydrogels between 20 [below lower critical solution temperature (LCST)] and 50 °C (above LCST), and this difference would become obvious with a decrease in clay content. For the standpoint of applications, oscillating swelling/deswelling behavior was investigated to determine whether properties of IPN hydrogels would be stable for potential applications. Bovine serum albumin (BSA) was used as model drug for in vitro experiment, the release data suggested that the controlled drug release could be achieved by modulating clay content. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 96–106, 2009     

Synthesis,characterization and swelling kinetics of thermoresponsive PAM-<Emphasis Type="Italic">g</Emphasis>-PVA/PVP semi-IPN hydrogels

Polyacrylamide grafted poly(vinyl alcohol)/polyvinylpyrrolidone (PAM-g-PVA/PVP) semi-interpenetrating polymer network (semi-IPN) hydrogels were designed and prepared via a simple free radical polymerization route initiated by a PVA-(NH₄)₂Ce(NO₃)₆ redox reaction technique. The structure of the PAM-g-PVA/PVP hydrogels was characterized by a Fourier transform infrared spectroscope (FTIR), and the morphologies were observed by a scanning electron microscopy (SEM). The swelling kinetics investigations demonstrated that the equilibrium swelling (Q _e ) of the (PAM-g-PVA/PVP) semi-IPN hydrogels depended on PVP compositional ratios and temperature. The Q _e values were reduced with increasing the PVP contents, which was in agreement with theoretical water contents (S _∞) fitted by swelling kinetic data, and the swelling mechanism belonged to a non-Fickian mode for the PAM-g-PVA/PVP hydrogels. These hydrogels displayed thermosensitivities different from the common thermoresponsive gels that have a lower critical solution temperature. The swelling is enhanced with increasing the temperature of the media before 42°C, and later the equilibrium swelling is contrarily reduced. Therefore, the swelling behavior of the PAM-g-PVA/PVP hydrogels may be controlled and modulated by means of the compositional ratios of PVP to PAM-g-PVA and temperature.     

Novel crosslinked thermoresponsive hydrogels with controlled poly(ethylene glycol)—poly(propylene glycol) multiblock copolymer structure

New thermoresponsive crosslinked hydrogels with controlled multiblock copolymer structure were prepared from equimolar amounts of α,ω-diamino poly(propylene glycol)s with molecular weights (MW) 230, 400, and 2,000 g mol^?1 and diepoxy-terminated poly(ethylene glycol)s of approximate MW 1,000; 2,000; and 4,000 g mol^?1. Their thermoresponsive character was investigated on the 10–70 °C interval, while the swelling behavior was tested at 21, 37, and 50 °C. All hydrogels displayed temperature sensitivity, but a volume phase transition was noticed only in the case of poly(propylene glycol) (PPG)₂₀₀₀-containing hydrogels. The volume phase transition temperature (T _VPT ) depended on the MW of the hydrophilic poly(ethylene glycol) (PEG) chains attached to the PPG₂₀₀₀ block, as well as on the added salts. Longer PEG blocks determined a shift of T _VPT towards higher values, while the influence of the salt added was in agreement with the Hofmeister series, except for NaH₂PO₄ which determined the destruction of the hydrogel network. The equilibrium swelling degree depended on the MW of both PEG and PPG blocks, as well as on temperature. The analysis of the swelling process indicated a modification of the gel characteristics with temperature and second-order kinetics for the water penetration into the hydrogel.     

Using 2-isopropyl-2-oxazine to explore the effect of monomer distribution and polymer architecture on the thermoresponsive behavior of copolymers

Poly(cyclic imino ether)s (PCIE) have emerged as a highly promising class of polymer for use in biomedical applications with their value being derived from their excellent biocompatibility, diverse chemistry, and tunable hydrophilicity. Here, we investigate the properties of poly(2-isopropyl-2-oxazine) (PiPrOz), a relatively unexplored PCIE, determining it to have a cloud point temperature (T_cp) below physiological temperature, not to crystallize from bulk or in solution, and to be highly biocompatible. Furthermore, a series of copolymers consisting of iPrOz and 2-methyl-2-oxazine (MeOz) was investigated with regard to the effect of monomer distribution and polymer architecture on thermoresponsive properties. To this end, linear block and statistical co-poly(2-oxazine)s (co-POz), along with three comb-shaped POz with block or statistical POz side chains were prepared. Each of the five polymers showed distinct thermoresponsive behavior, with the linear block co-POz undergoing micelle formation and the other polymers macroscopic phase-separation at different T_cps. The variety observed in response to heating clearly highlights the importance of monomer sequence and polymer architecture when designing thermoresponsive polymers. We anticipate that our findings will prove useful to polymer chemists seeking to prepare novel thermoresponsive biomaterials.     

Thermoresponsive behavior of poly(n-isopropylacrylamide) hydrogels containing gold nanostructures

We report the changes in the structure and thermoresponsive behavior of poly(N-isopropylacrylamide) (PNIPAm) hydrogels when gold nanostructures are synthesized in situ within the hydrogel matrix. Cross-linked PNIPAm hydrogels were synthesized using NIPAm and 0.00-3.50% (w/w versus NIPAm) of N,N'-methylenebisacrylamide (MBAm) and/or N,N'-cystaminebisacrylamide (CBAm) as cross-linking agents. The hydrogels were soaked in potassium tetrachloroaurate to introduce gold ions. The hydrogels containing Au3+ were then immersed in a sodium borohydride solution to reduce the gold ions. Infrared spectroscopy, UV-visible spectroscopy, and equilibrium swelling were used to examine the structural/physical differences between gels of different compositions; UV-visible spectroscopy and mass measurements were used to observe the kinetics and thermodynamics of the hydrogel volume phase transition. These studies revealed several differences in the physical characteristics and thermoresponsive behavior of hydrogels based on cross-linker identity and the presence or absence of gold nanostructures. Hydrogels with gold nanostructures and high CBAm and low MBAm content have equilibrium swelling masses 3-20 times their native analogues. In comparison, gold-containing hydrogels with high MBAm and low CBAm content have swelling masses that are equal to their native analogues. Additionally, the gold-containing PNIPAm hydrogels cross-linked with only CBAm have a deswelling temperature of approximately 40 degrees C, approximately 8 degrees C above the samples cross-linked with only MBAm. Varying the CBAm content and introducing gold enables tuning of the deswelling temperature.     

Hydrogels with Dual Thermoresponsive Mechanical Performance

Dual thermoresponsive chemical hydrogels, combining poly(N‐isopropylacrylamide) side‐chains within a poly(N‐acryloylglycinamide) network, are designed following a simple and versatile procedure. These hydrogels exhibit two phase transitions both at low (upper critical solution temperature) and high (lower critical solution temperature) temperatures, thereby modifying their swelling, rheological, and mechanical properties. These novel thermo‐schizophrenic hydrogels pave the way for the development of thermotoughening wet materials in a broad range of temperatures.     

Biodegradable poly(carbonate‐ether)s with thermoresponsive feature at body temperature

Novel biodegradable poly(carbonate‐ether)s (PCEs) with lower critical solution temperature (LCST) at body temperature were synthesized by copolymerization of CO₂ and ethylene oxide (EO) under double metal cyanide (DMC) catalyst. The PCEs showed carbonate unit (CU) content of 1.0–42.4 mol % and molecular weight of 2.7–247 kg/mol, which exhibited reversible thermoresponsive feature in deionized water with LCST in a broad window from 21.5 to 84.1 °C. The LCST was highly sensitive to the CU content and the molecular weight of PCEs, and it showed a linear relation with CU content for PCEs with similar molecular weight. In particular, aqueous solution of PCE with a 26.0 mol % of CU showed an LCST around 36.1 °C, which was very close to the body temperature. Interestingly, it was found that the phase transition behavior changed with PCE concentration. For PCE with M_n of 2.7 kg/mol and CU content of 30.0 mol %, the LCST increased from 21.5 to 36.7 °C when the PCE concentration changed from 10 to 1 g/L. Dynamic light scattering indicated that the phase transition was possibly due to a coil‐to‐globule transition. The thermoresponsive biodegradable PCE with LCST at body temperature is promising for biomedical applications, especially for in vivo applications. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Thermo-reversible swelling of thin hydrogel films immobilized by low-pressure plasma

Thin films of graft copolymers consisting of poly(N-isopropylacrylamide) (PNiPAAm) or poly(N,N-diethylacrylamide) (PDEAAm) as polymer backbone and poly(ethyleneglycol) as side chains were cross-linked on fluoropolymer substrates by low-pressure plasma treatment. All immobilized polymers exhibit a lower critical solution temperature between 34 and 40 degrees C. The swelling and collapsing of the hydrogels was examined with temperature-dependent spectroscopic ellipsometry. Two time ranges of swelling were observed: a fast 'dynamic' and a slow 'equilibrium' swelling. The dynamic swelling occurs within minutes or less, whereas the equilibrium swelling needs several days to complete. The surface-bound hydrogels show a shift in the transition temperature toward lower temperatures compared with the behavior in solution. Full reversibility of the dynamic swelling/collapsing was found, but the temperature scan exhibits a hysteresis between heating and cooling cycles. The PNiPAAm-containing hydrogels show a sharper transition compared to the PDEAAm-containing hydrogels, which is almost linear over a wide temperature range.     

Synthesis and characterization of temperature-sensitive and biodegradable hydrogel based on N-isopropylacrylamide

Based on a biodegradable cross-linker, N-maleyl chitosan (N-MACH), a series of Poly(N-isopropylacrylamide) (PNIPAAm) and Poly(N-isopropylacrylamide-co-acrylamide) [P(NIPAAm-co-Am)] hydrogels were prepared, and their lower critical solution temperature (LCST), swelling kinetics, equilibrium swelling ratio in NaCl solution, and enzymatic degradation behavior in simulated gastric fluids (SGF) were discussed. The LCST did not change with different cross-linker contents. By altering the NIPAAm/Am molar ratio of P(NIPAAm-co-Am) hydrogels, the LCST could be increased to 39°C. The LCST of the hydrogel was significantly influenced by the monomer ratio of the NIPAAm/Am but not by the cross-linker content. In the swelling kinetics, all the dry hydrogels exhibited fast swelling behavior, and the swelling ratios were influenced by the cross-linker content and NIPAAm/Am molar ratios. Equilibrium swelling ratio of all the hydrogels decreased with increasing NaCl solution concentration. In enzymatic degradation tests, the weight loss of hydrogels was dependent on the cross-linker contents and the enzyme concentration.      

Synthesis and self-assembly behavior of thermoresponsive poly(oligo(ethylene glycol) methyl ether methacrylate)-POSS with tunable lower critical solution temperature

This article reports on the synthesis of a novel amphiphilic polyhedral oligomeric silsesquioxane (POSS) end-capped poly(2-(2-methoxyethoxy)ethyl methacrylate)-co-oligo(ethylene glycol) methacrylate) (POSS-P(MEO₂MA-co-OEGMA)). These thermoresponsive organic–inorganic hybrid polymers exhibit critical phase transition temperature in water, which can be finely tuned by changing the feed ratio of OEGMA and MEO₂MA. The lower critical solution temperature (LCST) of POSS-P(MEO₂MA-co-OEGMA) increases from 31 to 59 °C with the increasing of OEGMA content. Dynamic light scattering (DLS) and transmission electron microscopy (TEM) studies show that these polymers can self-assemble into spherical micelles with the thermosensitive block into the corona and the POSS forming the core, and larger aggregates are formed when the temperature values are above their LCSTs. These thermoresponsive polymers POSS-P(MEO₂MA-co-OEGMA) with self-assembly behavior and tunable tempetature-responsive property have the potential applications in material science and biotechnology.     

Biodegradable thermo‐ and pH‐responsive hydrogels for oral drug delivery

In this article, novel smart hydrogels based on biodegradable pH sensitive poly(L ‐glutamic acid‐g‐2‐hydroxylethyl methacrylate) (PGH) chains and temperature‐sensitive hydroxypropylcellulose‐g‐acrylic acid (HPC‐g‐AA) segments were designed and synthesized. The influence of pH and temperature on the equilibrium swelling ratios of the hydrogels was discussed. The optical transmittance of the hydrogels was also changed as a function of temperature, which reflecting that the HPC‐g‐AA part of the hydrogels became hydrophobic at the temperature above the lower critical solution temperature (LCST). At the same time, the LCST of the hydrogels had a visible pH‐dependent behavior. Scanning electron microscopic analysis revealed the morphology of the hydrogels before and after enzymatic degradation. The biodegradation rate of the hydrogels was directly related to the PGH content and the pH value. The in vitro release of bovine serum albumin from the hydrogels were investigated. The release profiles indicated that both the HPC‐g‐AA and PGH contents played important roles in the drug release behaviors. These results show that the smart hydrogels seem to be of great promise in pH–temperature oral drug delivery systems. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Photocrosslinking of Polyglycidol and Its Derivative: Route to Thermoresponsive Hydrogels

Hydrogels of biologically well‐tolerated, high‐molar‐mass polyglycidol (PGl) and its thermoresponsive derivative poly(glycidol‐co‐ethyl glycidyl carbamate) have been obtained by direct UV crosslinking in the solid state. Polymers with molar masses up to 1.45 × 10⁶ g mol⁻¹ were crosslinked in the presence of benzophenone or (4‐benzoylbenzyl)trimethylammonium chloride as photosensitizers. The photosensitizer concentration was varied from 2 to 10 wt%. The influence of polymer composition and photosensitizer type and amount on the crosslinking efficiency, swelling and temperature behavior of the obtained hydrogels was investigated. The photocrosslinking of PGl and poly(glycidol‐co‐ethyl glycidyl carbamate) led to hydrogels with swelling degrees up to 1700%. The swelling degrees of the hydrogels decreased with the increase of the environmental temperature indicating the thermoresponsive nature of gels. The swelling of obtained gels can be controlled by varying the composition of the copolymer precursor and by the network density.     

Synthesis,characterization, and drug release behaviors of a novel thermo‐sensitive poly(N‐acryloylglycinates)

In this study, a novel thermo‐sensitive poly(N‐acryloylglycinates) was prepared in order to get a potential drug release carrier. The corresponding monomers and the polymers were characterized with Fourier‐transform infrared (FTIR) and ¹H NMR. The thermo‐sensitivity of the poly(N‐acryloylglycinates) was evaluated by measuring their lower critical solution temperatures (LCST) in water, inorganic salt solution, and different pH solutions. The results indicated that poly(N‐acryloylglycine methyl ester) (NAGME) and poly(N‐acryloylglycine ethyl ester) (NAGEE) exhibit a reversible thermo‐sensibility in their aqueous solutions at 61.5 and 12.5°C, respectively. However, no thermo‐sensitive behavior of poly(N‐acryloylglycine propyl ester) (NAGPE) was found due to its over hydrophobicity. The swelling studies on hydrogels were carried out at different temperatures, in different pH, and inorganic salt solutions. The hydrogels showed a remarkable phase transition at about 35°C with changing temperature. The release rate of caffeine from the thermo‐sensitive hydrogel was apparently decreased as the crosslinker content increased and temperature decreased. Seventy five percent caffeine from the polymeric hydrogel with 5% NMBA (N, N‐methylenebis(acrylamide)) was released at room temperature within 240 min, whereas 95.4% caffeine diffused into the medium at 37°C. Copyright © 2009 John Wiley & Sons, Ltd.