Preparation and reactivity of mixed-ligand iron(II) hydride complexes with phosphites and polypyridyls

Hydride complexes [FeH(N-N)P3]BPh4 (1, 2) [N-N = 2,2'-bipyridine (bpy) and 1,10-phenanthroline (phen); P = P(OEt)4, PPh(OEt)2, and PPh2OEt] were prepared by allowing FeCl2(N-N) to react with phosphite in the presence of NaBH4. The hydrides [FeH(bpy)2P]BPh4 (3) [P = P(OEt)3 and PPh(OEt)2] were prepared by reacting the tris(2,2'-bipyridine) [Fe(bpy)3]Cl2.5H2O complex with the appropriate phosphite in the presence of NaBH4. The protonation reaction of 1 and 2 with acid was studied and led to thermally unstable (above -20 degrees C) dihydrogen [Fe(eta2-H2)(N-N)P3]2+ (4, 5) derivatives. The presence of the H2 ligand is indicated by short T(1 min) values (3.1-3.6 ms) and by J(HD) measurements (31.2-32.5 Hz) of the partially deuterated derivatives. Carbonyl [Fe(CO)(bpy)[P(OEt)3]3](BPh4)2 (6) and nitrile [Fe(CH3CN)(N-N)P3](BPh4)2 (7, 8) [N-N = bpy, phen; P = P(OEt)3 and PPh(OEt)2] complexes were prepared by substituting the H2 ligand in the eta2-H2 4, 5 derivatives. Aryldiazene complexes [Fe(ArN=NH)(N-N)P3](BPh4)2 (9, 10, 11) (Ar = C6H5, 4-CH3C6H4) were also obtained by allowing hydride [FeH(N-N)P3]BPh4 derivatives to react with aryldiazonium cations in CH2Cl2 at low temperature.     

Cyanide-bridged Mn(III)-Fe(III) bimetallic complexes based on the pentacyano(1-methylimidazole)ferrate(III) building block: structure and magnetic characterizations

Seven cyanide-bridged bimetallic complexes have been synthesized by the reaction of [Fe(1-CH3im)(CN)5]2- with Mn(III) Schiff base complexes. Their crystal structure and magnetic properties have been characterized. Five complexes, [Mn2(5-Brsalen)2Fe(CN)5(1-CH3im)] x H2O (1), [Mn2(5-Clsalen)2(H2O)2Fe(CN)5(1-CH3im)] x H2O (2), [Mn2(5-Clsaltn)2(H2O)2Fe(CN)5(1-CH3im)] (3), [Mn2(5-Clsaltmen)2(H2O)2Fe(CN)5(1-CH3im)] x H2O (4), and [Mn2(5-Brsaltmen)2(H2O)2Fe(CN)5(1-CH3im)] x CH3OH (5), are neutral and trinuclear with two [Mn(SB)]+ (SB2- = Schiff base ligands) and one [Fe(1-CH3im)(CN)5]2-. Complex {[Et4N][Mn(acacen)Fe(CN)5(1-CH3im)]}n x 6nH2O (6) is one-dimensional with alternate [Mn(acacen)]+ and [Fe(CN)5(1-CH3im)]2- units. The two-dimensional complex {[Mn4(saltmen)4Fe(CN)5(1-CH3im)]}n[ClO4]2n x 9nH2O (7) consists of Mn4Fe units which are further connected by the phenoxo oxygen atoms. Magnetic studies show the presence of ferromagnetic Mn(III)-Fe(III) coupling in the trinuclear compounds with the magnetic coupling constant (J) ranging from 4.5 to 6.0 cm-1, based on the Hamiltonian H = -2JSFe(SMn(1) + SMn(2)). Antiferromagnetic interaction has been observed in complex 6, whereas ferromagnetic coupling occurs in complex 7. Complexes 6 and 7 exhibit long-range magnetic ordering with a TN value of 4.0 K for 6 and Tc of 4.8 K for 7. Complex 6 shows metamagnetic behavior at 2 K, and complex 7 possesses a hysteresis loop with a coercive field of 500 Oe, typical of a soft ferromagnet.     

Preparation and reactivity of mixed-ligand ruthenium(II) hydride complexes with phosphites and polypyridyls

Chloro complexes [RuCl(N-N)P3]BPh4 (1-3) [N-N = 2,2'-bipyridine, bpy; 1,10-phenanthroline, phen; 5,5'-dimethyl-2,2'-bipyridine, 5,5'-Me2bpy; P = P(OEt)3, PPh(OEt)2 and PPh2OEt] were prepared by allowing the [RuCl4(N-N)].H2O compounds to react with an excess of phosphite in ethanol. The bis(bipyridine) [RuCl(bpy)2[P(OEt)3]]BPh4 (7) complex was also prepared by reacting RuCl2(bpy)2.2H2O with phosphite and ethanol. Treatment of the chloro complexes 1-3 and 7 with NaBH4 yielded the hydride [RuH(N-N)P3]BPh4 (4-6) and [RuH(bpy)2P]BPh4 (8) derivatives, which were characterized spectroscopically and by the X-ray crystal structure determination of [RuH(bpy)[P(OEt)3]3]BPh4 (4a). Protonation reaction of the new hydrides with Br?nsted acid was studied and led to dicationic [Ru(eta2-H2)(N-N)P3]2+ (9, 10) and [Ru(eta(2-H2)(bpy)2P]2+ (11) dihydrogen derivatives. The presence of the eta2-H2 ligand was indicated by a short T(1 min) value and by the measurements of the J(HD) in the [Ru](eta2-HD) isotopomers. From T(1 min) and J(HD) values the H-H distances of the dihydrogen complexes were also calculated. A series of ruthenium complexes, [RuL(N-N)P3](BPh4)2 and [RuL(bpy)2P](BPh4)2 (P = P(OEt)3; L = H2O, CO, 4-CH3C6H4NC, CH3CN, 4-CH3C6H4CN, PPh(OEt)2], was prepared by substituting the labile eta2-H2 ligand in the 9, 10, 11 derivatives. The reactions of the new hydrides 4-6 and 8 with both mono- and bis(aryldiazonium) cations were studied and led to aryldiazene [Ru(C6H5N=NH)(N-N)P3](BPh4)2 (19, 21), [[Ru(N-N)P3]2(mu-4,4'-NH=NC6H4-C6H4N=NH)](BPh4)4 (20), and [Ru(C6H5N=NH)(bpy)2P](BPh4)2 (22) derivatives. Also the heteroallenes CO2 and CS2 reacted with [RuH(bpy)2P]BPh4, yielding the formato [Ru[eta1-OC(H)=O](bpy)2P]BPh4 and dithioformato [Ru[eta1-SC(H)=S](bpy)2P]BPh4 derivatives.     

Design of rhenium(I) polypyridine biotin complexes as a new class of luminescent probes for avidin

This paper describes the design of a series of luminescent rhenium(I) polypyridine biotin complexes containing different spacer-arms, [Re(N-N)(CO)3 (py-4-CH2-NH-biotin)](PF6) (py-4-CH2-NH-biotin = 4-(biotinamidomethyl)pyridine; N-N = 1,10-phenanthroline, phen (1a), 3,4,7,8-tetramethyl-1,10-phenanthroline, Me4-phen (2a), 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline, Me2-Ph2-phen (3a), dipyrido[3,2-f:2',3'-h]quinoxaline, dpq (4a)), [Re(N-N)(CO)3 (py-3-CO-NH-en-NH-biotin)](PF6) (py-3-CO-NH-en-NH-biotin = 3-(N-((2-biotinamido)ethyl)amido)pyridine; N-N = phen (1b), Me4-phen (2b), Me2-Ph2-phen (3b), dpq (4b)), and [Re(N-N)(CO)3 (py-4-CH2-NH-cap-NH-biotin)](PF6) (py-4-CH2-NH-cap-NH-biotin = 4-(N-((6-biotinamido)hexanoyl)aminomethyl)pyridine; N-N = phen (1c), Me4-phen (2c), Me2-Ph(2)-phen (3c), dpq (4c)). Upon irradiation, all of the rhenium(I)-biotin complexes exhibited intense and long-lived triplet metal-to-ligand charge-transfer (3MLCT) (d pi(Re) --> pi* (diimine)) emission in fluid solutions at 298 K. The interactions of these biotin-containing complexes with avidin have been studied by 4'-hydroxyazobenzene-2-carboxylic acid (HABA) assays, emission titrations, and competitive association and dissociation assays. On the basis of the results of these experiments, homogeneous assays for biotin and avidin have been designed.     

Efficient energy transfer via the cyanide bridge in dinuclear complexes containing Ru(II) polypyridine moieties

We report the synthesis, structure and properties of the cyanide-bridged dinuclear complex ions [Ru(L)(bpy)(μ-NC)M(CN)(5)](2-/-) (L = tpy, 2,2';6',2'-terpyridine, or tpm, tris(1-pyrazolyl)methane, bpy = 2,2'-bipyridine, M = Fe(II), Fe(III), Cr(III)) and the related monomers [Ru(L)(bpy)X](2+) (X = CN(-) and NCS(-)). All the monomeric compounds are weak MLCT emitters (λ = 650-715 nm, ? ≈ 10(-4)). In the Fe(II) and Cr(III) dinuclear systems, the cyanide bridge promotes efficient energy transfer between the Ru-centered MLCT state and a Fe(II)- or Cr(III)-centered d-d state, which results either in a complete quenching of luminescence or in a narrow red emission (λ ≈ 820 nm, ? ≈ 10(-3)) respectively. In the case of Fe(III) dinuclear systems, an electron transfer quenching process is also likely to occur.     

Structures that should be Described in Higher-Symmetry, Centrosymmetric Space Groups. Part 2. The Structures of [Ni(C_5H_4NO-2-CH=N-CH_2CH_2-N=CH-2-C_5H_4NO)(H_2O)_2]- (ClO_4)_2, {Ni[C_5H_4NO-2-CH=N-CH(CH_3)CH_2-N=CH-2- C_5H_4NO](H_2O)_2}

1　ＩＮＴＲＯＤＵＣＴＩＯＮＳｅｖｅｒａｌｉｎｃｏｒｒｅｃｔｓｐａｃｅｇｒｏｕｐｓｈａｖｅｂｅｅｎｒｅ ａｓｓｉｇｎｅｄｂｙｍａｋｉｎｇｕｓｅｏｆｓｉｍｕｌａｔｅｄｓｔｒｕｃｔｕｒｅｆａｃｔｏｒｓ;ｈｏｗｅｖｅｒ,ｔｈｅｃｒｕｘｏｆｔｈｉｓｏｒａｎｙｓｐａｃｅｇｒｏｕｐｒｅｖｉｓｉｏｎｉｓｔｈｅａｃｃｕｒａｔｅｒｅｐｏｒｔｉｎｇｏｆｔｈｅｓｐａｃｅｇｒｏｕｐａｎｄａｔｏｍｉｃｃｏｏｒｄｉｎａｔｅｓｏｆｔｈｅｉｎｃｏｒｒｅｃｔｌｙｄｅｔｅｒｍｉｎｅｄｓｔｒｕｃｔｕｒｅｓｉｎｃｅｔｈｅｔｒｕｅｓｔｒｕｃ…     

Synthesis and Crystal Structure of an Ionic Compound [Fe(CN)_6(phCH_2NC_5H_5)3]·(H_2O)_4

A novel ionic compound [Fe(CN)6(phCH2NC5H5)3]·(H2O)4(Mr = 794.71) has been synthesized and its structure was characterized by IR, elemental analysis and X-ray diffraction. The compound crystallizes in monoclinic, space group P21/c with a = 10.837(2), b = 16.551(3), c = 23.402(5) , β = 97.531(4)o, V = 4161.0(15) A3, Z = 4, Dc = 1.269 g/cm3, F(000) = 1668, μ = 0.414 mm-1, R = 0.0479 and wR = 0.1232. The building unit of the title compound consists of three (phCH2N+C5H5) ions, one [Fe(CN)6]3- anion and four water molecules. According to the structural analysis, [Fe(CN)6]3- are linked together by O–H···N and O–H···O hydrogen bonds, but [Fe(CN)6]3- and [(phCH2N+C5H5)3] ions are bound by electrostatic force to form an ionic compound.     

Desoxo molybdenum(IV) and tungsten(IV) bis(dithiolene) complexes: monomer-dimer interconversion involving reversible thiol bridge formation

Two series of thiol-bridged dimeric desoxo molybdenum(IV) and tungsten(IV) bis(dithiolene) complexes, [Et(4)N](2)[M(IV)(2)(SR)(2)(mnt)(4)] [M = Mo, R = (1) -Ph, (2) -CH(2)Ph, (3) -CH(2)CH(3), (4) -CH(2)CH(2)OH; M = W, R = (1a) -Ph, (2a) -CH(2)Ph, (3a) -CH(2)CH(3), (4a) -CH(2)CH(2)OH] and one monomeric desoxo complex, [Et(4)N](2)[WIV(SPh)(2)(mnt)(2)] (5a) are reported. These complexes are diamagnetic, and crystal structures of each of the complex (except 5a) exhibits a dimeric {M(IV)(2)(SR)(2)} core without any metal-metal bond where each metal atom possesses hexa coordination. The M-SR distance ranges from 2.437 to 2.484 Angstrom in molybdenum complexes and from 2.418 to 2.469 Angstrom in tungsten complexes. These complexes display Mo-S(R)-Mo angles ranging from 92.84 degrees to 96.20 degrees in the case of 1-4 and W-S(R)-W angles ranging from 91.20 degrees to 96.25 degrees in the case of 1a-4a. Interestingly, both the series of Mo(IV) and W(IV) dimeric complexes respond to an unprecedented interconversion between the dimer and the corresponding hexacoordinated monomer upon change of pH. This pH-dependent interconversion establishes the fact that even the pentacoordinated Mo(IV) and W(IV) bis(dithiolene) moieties are forced to dimerize; these can easily be reverted back to the corresponding monomeric complex, reflecting the utility of dithiolene ligand in stabilizing the Mo(IV)/W(IV) moiety in synthesized complexes similar to the active sites present in native proteins.     

Cyclometalated iridium(III) diimine bis(biotin) complexes as the first luminescent biotin-based cross-linkers for avidin

Four luminescent cyclometalated iridium(III) diimine complexes [Ir(N-C)2(N-N)](PF6) (HN-C = 2-(4-(N-((2-biotinamido)ethyl)aminomethyl)phenyl)pyridine, Hppy-4-CH2NHC2NH-biotin, N-N = 3,4,7,8-tetramethyl-1,10-phenanthroline, Me4-phen (1a); N-N = 4,7-diphenyl-1,10-phenanthroline, Ph2-phen (2a); HN-C = 2-(4-(N-((6-biotinamido)hexyl)aminomethyl)phenyl)pyridine, Hppy-4-CH2NHC6NH-biotin, N-N = Me4-phen (1b); N-N = Ph2-phen (2b)), each containing two biotin units, have been synthesized and characterized. The photophysical and electrochemical properties of these complexes have been investigated. Photoexcitation of these iridium(III) diimine bis(biotin) complexes in fluid solutions at 298 K and in alcohol glass at 77 K resulted in intense and long-lived luminescence. The emission is assigned to a triplet metal-to-ligand charge-transfer (3MLCT) (d pi(Ir) --> pi*(N-N)) excited state. The emissive states of complexes 1a,b are probably mixed with some 3IL (pi --> pi*) (Me4-phen) character. The interactions of these iridium(III) diimine bis(biotin) complexes with avidin have been studied by 4'-hydroxyazobenzene-2-carboxylic acid (HABA) assays and emission titrations. The potential for these complexes to act as cross-linkers for avidin has been examined by resonance-energy transfer- (RET-) based emission quenching experiments, microscopy studies using avidin-conjugated microspheres, and HPLC analysis.     

Assembly of azido- or cyano-bridged binuclear complexes containing the bulky [Mn(phen)2]2+ building block: syntheses, crystal structures, and magnetic properties

Two new cyano-bridged heterobinuclear complexes, [Mn(II)(phen)2Cl][Fe(III)(bpb)(CN)2] x 0.5CH3CH2OH x 1.5H2O (1) and [Mn(II)(phen)2Cl][Cr(III)(bpb)(CN)2] x 2H2O (2) [phen = 1,10-phenanthroline; bpb(2-) = 1,2-bis(pyridine-2-carboxamido)benzenate], and four novel azido-bridged Mn(II) dimeric complexes, [Mn2(phen)4(mu(1,1)-N3)2][M(III)(bpb)(CN)2]2 x H2O [M = Fe (3), Cr (4), Co (5)] and [Mn2(phen)4(mu(1,3)-N3)(N3)2]BPh4 x 0.5H2O (6), have been synthesized and characterized by single-crystal X-ray diffraction analysis and magnetic studies. Complexes 1 and 2 comprise [Mn(phen)2Cl]+ and [M(bpb)(CN)2]- units connected by one cyano ligand of [M(bpb)(CN)2]-. Complexes 3-5 are doubly end-on (EO) azido-bridged Mn(II) binuclear complexes with two [M(bpb)(CN)2]- molecules acting as charge-compensating anions. However, the Mn(II) ions in complex 6 are linked by a single end-to-end (EE) azido bridging ligand with one large free BPh4(-) group as the charge-balancing anion. The magnetic coupling between Mn(II) and Fe(III) or Cr(III) in complexes 1 and 2 was found to be antiferromagnetic with J(MnFe) = -2.68(3) cm(-1) and J(MnCr) = -4.55(1) cm(-1) on the basis of the Hamiltonian H = -JS(Mn)S(M) (M = Fe or Cr). The magnetic interactions between two Mn(II) ions in 3-5 are ferromagnetic in nature with the magnetic coupling constants of 1.15(3), 1.05(2), and 1.27(2) cm(-1) (H = -JS(Mn1)S(Mn2)), respectively. The single EE azido-bridged dimeric complex 6 manifests antiferromagnetic interaction with J = -2.29(4) cm(-1) (H = -JS(Mn1)S(Mn2)). Magneto-structural correlationship on the EO azido-bridged Mn(II) dimers has been investigated.     

Preparations, structures, and electrochemical studies of aryldiazene complexes of rhenium: syntheses of the first heterobinuclear and heterotrinuclear derivatives with bis(diazene) or bis(diazenido) bridging ligands

The mono- and binuclear aryldiazene complexes [Re(C6H5N=NH)(CO)5-nPn]BY4 (1-5) and [(Re(CO)5-nPn)2-(mu-HN=NAr-ArN=NH)](BY4)2 (6-12) [P = P(OEt)3, PPh(OEt)2, PPh2OEt; n = 1-4; Ar-Ar = 4,4'-C6H4-C6H4, 4,4'-(2-CH3)C6H3-C6H3(2-CH3), 4,4'-C6H4-CH2-C6H4; Y = F, Ph) were prepared by reacting the hydride species ReH(CO)5-nPn with the appropriate mono- and bis(aryldiazonium) cations. These compounds, as well as other prepared compounds, were characterized spectroscopically (IR; 1H, 31P, 13C, and 15N NMR data), and 1a was also characterized by an X-ray crystal structure determination. [Re(C6H5N=NH)(CO)(P(OEt)3)4]BPh4 (1a) crystallizes in space group P1 with a = 15.380(5) A, b = 13.037(5) A, c = 16.649(5) A, alpha = 90.33(5) degrees, beta = 91.2(1) degrees, gamma = 89.71(9) degrees, and Z = 2. The "diazene-diazonium" complexes [M(CO)3P2(HN=NAr-ArN identical to N)](BF4)2 (13-15, 17) [M = Re, Mn; P = PPh2OEt, PPh2OMe, PPh3; Ar-Ar = 4,4'-C6H4-C6H4, 4,4'-C6H4-CH2-C6H4] and [Re(CO)4(PPh2OEt)(4,4'-HN=NC6H4-C6H4N identical to N)](BF4)2 (16b) were synthesized by allowing the hydrides MH(CO)3P2 or ReH(CO)4P to react with equimolar amounts of bis(aryldiazonium) cations under appropriate conditions. Reactions of diazene-diazonium complexes 13-17 with the metal hydrides M2H2P'4 and M2'H(CO)5-nP"n afforded the heterobinuclear bis(aryldiazene) derivatives [M1(CO)3P2(mu-HN=NAr-ArN=NH)M2HP'4](BPh4)2 (ReFe, ReRu, ReOs, MnRu, MnOs) and [M1(CO)3P2(mu-HN=NAr-ArN=NH)M2'(CO)5-nP"n](BPh4)2 (ReMn, MnRe) [M1 = Re, Mn; M2 = Fe, Ru, Os; M2' = Mn, Re; P = PPh2OEt, PPh2OMe; P',P" = P(OEt)3, PPh(OEt)2; Ar-Ar = 4,4'-C6H4-C6H4, 4,4'-C6H4-CH2-C6H4; n = 1, 2]. The heterotrinuclear complexes [Re(CO)3(PPh2OEt)2(mu-4,4'-HN=NC6H4-C6H4N=NH)M(P(OEt)3)4(mu-4,4'-HN=NC6H4- C6H4N=NH)Mn(CO)3(PPh2OEt)2](BPh4)4 (M = Ru, Os) (ReRuMn, ReOsMn) were obtained by reacting the heterobinuclear complexes ReRu and ReOs with the appropriate diazene-diazonium cations. The heterobinuclear complex with a bis(aryldiazenido) bridging ligand [Mn(CO)2(PPh2OEt)2(mu-4,4'-N2C6H4-C6H4N2)Fe(P(OEt)3)4]BPh4 (MnFe) was prepared by deprotonating the bis(aryldiazene) compound [Mn(CO)3(PPh2OEt)2(mu-4,4'-HN=NC6H4-C6H4N=NH)Fe(4- CH3C6H4CN)(P(OEt)3)4](BPh4)3. Finally, the binuclear compound [Re(CO)3(PPh2OEt)2(mu-4,4'-HN=NC6H4-C6H4N2)Fe(CO)2(P(OPh)3)2](BPh4)2 (ReFe) containing a diazene-diazenido bridging ligand was prepared by reacting [Re(CO)3(PPh2OEt)2(4,4'-HN=NC6H4-C6H4N identical to N)]+ with the FeH2(CO)2(P(OPh)3)2 hydride derivative. The electrochemical reduction of mono- and binuclear aryldiazene complexes of both rhenium (1-12) and the manganese, as well as heterobinuclear ReRu and MnRu complexes, was studied by means of cyclic voltammetry and digital simulation techniques. The electrochemical oxidation of the mono- and binuclear aryldiazenido compounds Mn(C6H5N2)(CO)2P2 and (Mn(CO)2P2)2(mu-4,4'-N2C6H4-C6H4N2) (P = PPh2OEt) was also examined. Electrochemical data show that, for binuclear compounds, the diazene bridging unit allows delocalization of electrons between the two different redox centers of the same molecule, whereas the two metal centers behave independently in the presence of the diazenido bridging unit.     

Field-induced metamagnetic transition in the Fe(III)-Mn(III) bimetallic chain built by a new cyanide-bearing Fe(III) precursor

The use of a new precursor, mer-[Fe(mpzcq)(CN)3]- (1), produced a dimeric molecule, [Fe(mpzcq)(CN)3][Mn(salen)(H2O)] x H2O (2), and a one-dimensional zigzag chain, [Fe(mpzcq)(CN)3][Mn(salcy)] x MeOH x MeCN (3). Antiferromagnetic couplings are operating between magnetic centers through CN ligands, and a field-induced metamagnetic transition is observed in 3.     

Synthesis and characterization of diiron dithiolate complexes containing a quinoxaline bridge

A potential model complex for the hydrogenase active site, [Fe(2){(μ-CH(2)S)(2)R}(CO)(6)] (1) (R = quinoxaline), was synthesized by condensation of [(μ-LiS)(2)Fe(2)(CO)(6)] with 2,3-bis(bromomethyl)quinoxaline. Reactions of 1 with bis(diphenylphosphino)methane (dppm) under a range of conditions yielded substituted complexes [Fe(2){(μ-CH(2)S)(2)R}(CO)(5)(dppm)] (2), [Fe(2){(μ-CH(2)S)(2)R}(CO)(4)(k(2)-dppm)] (3) and [Fe(2){(μ-CH(2)S)(2)R}(CO)(4)(μ-dppm)] (4). X-ray crystallography confirms that in 2, the dppm is terminally bonded to an iron atom via one phosphorus atom, whereas in 3, it acts as a chelating ligand to coordinate to an iron center in a dibasal-substituted manner. In 4, the dppm bridges the two iron atoms in a cis basal/basal fashion with one phosphorus bonded to each iron atom. Treatment of 1 with various tertiary phosphines at room temperature in acetonitrile (MeCN) generates a range of mono-substituted products [Fe(2){(μ-CH(2)S)(2)R}(CO)(5)L] (5, L = PEt(3); 6, PMe(3); 7, PPh(3); 8, Me(2)PPh). With Bu(t)NC, mono- and di-substituted [Fe(2){(μ-CH(2)S)(2)R}(CO)(5)(Bu(t)NC)] (9) and [Fe(2){(μ-CH(2)S)(2)R}(CO)(4)(Bu(t)NC)(2)] (10) complexes are generated. All the complexes were characterized by elemental analysis, IR, MS and NMR spectroscopy. IR and NMR spectroscopic studies suggest that addition of excess HBF(4)·OEt(2) acid to 1-4 led to the protonation of quinoxaline nitrogen atoms. In contrast, 5-10 were not stable in acidic media. Electrochemistry of 1-4 was investigated in the acetonitrile medium (0.1 M Bu(4)NPF(6)). The electrochemical instability of the reduced ligand, quinoxaline, and the reduced forms of these complexes revealed from the electrochemical studies suggests that they do not provide ideal models of the hydrogenase active site.     

Single-molecule magnets constructed from cyanometalates: {[Tp*Fe(III)(CN)3M(II)(DMF)4]2[OTf]2} x 2DMF (M(II) = Co, Ni)

Treatment of several divalent transition-metal trifluoromethanesulfonates [M(II)(OTf)2; M(II) = Mn, Co, Ni] with [NEt4][Tp*Fe(III)(CN)3] [Tp* = hydridotris(3,5-dimethylpyrazol-1-yl)borate] in DMF affords three isostructural rectangular clusters of {[Tp*Fe(III)(CN)3M(II)(DMF)4]2[OTf]2} x 2DMF (M(II) = Mn, 3; Co, 4; Ni, 5) stoichiometry. Magnetic studies of 3-5 indicate that the Tp*Fe(CN)3(-) centers are highly anisotropic and exhibit antiferromagnetic (3 and 4) and ferromagnetic (5) exchange to afford S = 4, 2, and 3 spin ground states, respectively. ac susceptibility measurements suggest that 4 and 5 exhibit incipient single-molecule magnetic behavior below 2 K.     

Synthesis and Crystal Structure of an Ionic Compound [Fe(CN)6(phCH2NC5H5)3]·(H2O)4

A novel ionic compound [Fe(CN)6(phCH2NC5H5)3]·(H2O)4(Mr = 794.71) has been synthesized and its structure was characterized by IR, elemental analysis and X-ray diffraction. The compound crystallizes in monoclinic, space group P21/c with a = 10.837(2), b = 16.551(3), c = 23.402(5) (A), β = 97.531(4)°V = 4161.0(15)(A)3, Z = 4, Dc = 1.269 g/cm3, F(000) = 1668, μ = 0.414 mm-1, R = 0.0479 and wR = 0.1232. The building unit of the title compound consists of three (phCH2N C5H5) ions, one [Fe(CN)6]3- anion and four water molecules. According to the structural analysis, [Fe(CN)6]3- are linked together by O-H…N and O-H…O hydrogen bonds, but [Fe(CN)6]3- and [(phCH2N C5H5)3] ions are bound by electrostatic force to form an ionic compound.Keywords: N-benzyl-pyridine, ferricyanic anion, crystal structure, supramolecular, ionic compound.     

类立方烷簇(Et_4N)[MoFe_3S_4(Et_2dtc)_5]CH_3CH的质谱

通过电子轰击谱,并借助亚稳技术及同位素丰度的比较分析,提出了(Et_4N)(MoFe_3S_4(Et_2dtc)-6]·CH_3CN质谱的可能断裂形式指出谱中的三个特征峰m/z 586、500及352的元素组成分别为MoFeS_6C_(14)H_(30)N_3,FeS_8C_(15)H_(30)N_3和FeS_4C_(14)H_(20)N_(20)m/z352的母离子为m/z500,而其子离子为m/z288、276和204。并由这些离子继续裂解成一系列较小的碎片离子。     

Synthesis and structures of selected triazapentadienate of Li, Mn, Fe, Co, Ni, Cu(I), and Cu(II) using 2,4-N,N'-disubstituted 1,3,5-triazapentadienate anions as ancillary ligands: [N(Ar)C(NMe2)NC(NMe2)N(R)](-) (Ar = Ph, 2,6-(i)Pr2-C6H3; R = H, SiMe3)

Addition reaction of ArN(SiMe 3)M (Ar = Ph or 2,6 - (i) Pr 2-C 6H 3 (Dipp); M = Li or Na) to 2 equivalents of alpha-hydrogen-free nitrile RCN (R = dimethylamido) gave the dimeric [M{N(Ar)C(NMe 2)NC(NMe 2)N(SiMe 3)}] 2 ( 1a, Ar = Ph, M = Li; 1b, Ar = Ph, M = Na; 1c, Ar = Dipp, M = Li). 1d was obtained by hydrolysis of 1c at ambient temperature. Treatment of a double ratio of 1a or 1b with anhydrous MCl 2 (M = Mn, Fe, Co) yielded the 1,3,5-triazapentadienato complexes [M{N(Ph)C(NMe 2)NC(NMe 2)N(SiMe 3)} 2] (M = Mn, 2; Fe, 3; Co, 4) and with NiCl 2.6H 2O gave [M{N(Ph)C(NMe 2)NC(NMe 2)N(H)} 2] (M = Ni, 5). Treatment of an equiv of 1c with anhydrous CuCl in situ and in air led to complexes [{N(Dipp)C(NMe 2)NC(NMe 2)N(SiMe 3)}CuPPh 3] 6 and [Cu{N(Dipp)C(NMe 2)NC(NMe 2)N(H)} 2] 7, respectively. 1c, 1d, and 2- 7 were characterized by X-ray crystallography and microanalysis. 1c, 1d, 5, and 6 were well characterized by (1)H, (13)C NMR, 1c by (7)Li, and 6 by (31)P NMR as well. The structural features of these complexes were described in detail.     

Structure and magnetic properties of the two-dimensional ferrimagnet (NEt4)[[Mn(salen)]2Fe(CN)6]: investigation of magnetic anisotropy on a single crystal

The title compound, (NEt(4))[[Mn(salen)](2)Fe(CN)(6)] (1), was synthesized via a 1:1 reaction of [Mn(salen)(H(2)O)]ClO(4) with (NEt(4))(3)[Fe(CN)(6)] in a methanol/ethanol medium (NEt(4)(+) = tetraethylammonium cation, salen(2)(-) = N,N'-ethylenebis(salicylidene)iminate). The two-dimensional layered structure of 1 was revealed by X-ray crystallographic analysis: 1 crystallizes in monoclinic space group P2(1)/c with cell dimensions of a = 12.3660(8) A, b = 15.311(1) A, c = 12.918(1) A, beta = 110.971(4) degrees, Z = 2 and is isostructural to the previously synthesized compound, (NEt(4))[[Mn(5-Clsalen)](2)Fe(CN)(6)] (5-Clsalen(2-) = N,N'-ethylenebis(5-chlorosalicylidene)iminate; Miyasaka, H.; Matsumoto, N.; Re, N.; Gallo, E.; Floriani, C. Inorg. Chem. 1997, 36, 670). The Mn ion is surrounded by an equatorial salen quadridentate ligand and two axial nitrogen atoms from the [Fe(CN)(6)](3-) unit, the four Fe[bond]CN groups of which coordinate to the Mn ions of [Mn(salen)](+) units, forming a two-dimensional network having [[bond]Mn[bond]NC[bond]Fe[bond]CN[bond]](4) cyclic repeating units. The network is spread over the bc-plane of the unit cell, and the layers are stacked along the a-axis. The countercation NEt(4)(+) is located between the layers. Compound 1 is a ferrimagnet with T(c) = 7.7 K and exhibits hysteresis with a remnant magnetization of 13.44 cm(3).mol(-1) (M/N mu(B) = 2.4) at zero field and a coercivity of 1000 Oe when the powder sample was measured at 1.9 K. Magnetic measurements of a direction-arranged single crystal were also carried out. The orientation of the crystallographic axes of a selected single crystal was determined by X-ray analysis, and magnetization was measured when an external field was applied in the a*, b, and c directions. The magnetization in the a* direction increased more easily than those in the b and c directions below the critical temperature. No hysteresis was observed only for the measurement in the a* direction, indicating the presence of strong structural anisotropy with potential anisotropy on Mn(III) ions.     

Redox chemistry of [Fe2(CN)10]4−. Part 5. Reaction with thiourea

The reaction of the dimeric iron(III) complex [Fe2(CN)10]4– with a large excess of thiourea, tu, takes place in a series of stages, the first two of which have been examined in detail. The first stage is a one equivalent outer sphere electron transfer to form [Fe2– (CN)10]5– and the radical cation tu+· which dimerises to form the disulfide tu22+. There is kinetic evidence for the formation of a significant proportion of a precursor complex [Fe2(CN)10]4–·tu at high concentrations of tu. The second stage involves cleavage of the mixed valence dimer to yield [Fe(CN)5tu]2– and [Fe(CN)5H2O]3–. On standing, substitution of H2O by tu and oxidation by air occurs slowly, and finally all of the original iron is observed as [Fe(CN)5tu]2–.     

Cyanide-bridged Fe(III)-Mn(III) chain with metamagnetic properties and significant magnetic anisotropy

The assembling of [Mn(5-MeOsalen)(H2O)]+ and [(Tp)Fe(CN)3]- affords the one-dimensional zigzag chain [(Tp)Fe(CN)3Mn(5-MeOsalen).2CH3OH]n [1; Tp- = hydrotris(pyrazolyl)borate and 5-MeOsalen2- = N,N'-ethylenebis(5-methoxysalicylideneiminate)]. The corroborated experimental and ab initio data indicate ferromagnetic Fe(III)-Mn(III) couplings and D < 0 anisotropy on Mn(III). The field-induced metamagnetic behavior is due to interchain effects.