HPLC Method for the Simultaneous Determination of the UV-Filters Butyl Methoxy Dibenzoylmethane and Octocrylene in the Presence of Their Photodegradants

Butyl methoxy dibenzoylmethane (BMDM) and octocrylene (OC), common UV-filters in sunscreen products are often used in combination. Together they provide broad spectrum photoprotection from exposure to both UVA- and UVB-light. These UV-filters may, however, undergo photodegradation and generate photodegradants, resulting in a potential loss of photoprotection. It is thus a concern that the photostability testing as described by the ICH Guideline Q1B is not a requirement for sunscreen products in Australia, Europe or the USA. UV-filter photodegradants have in addition been shown to be toxic, highlighting the importance of their separation from the parent UV-filters. An HPLC method was developed and validated to quantitatively determine a combination of these UV-filters in the presence of their photodegradants. Reverse-phase chromatography was employed, using a C18 column and an isocratic mobile phase consisting of methanol/water/acetic acid (89/10/1 v/v). Validation according to the ICH guidelines for linearity, accuracy, precision, sensitivity, specificity and robustness was confirmed. The developed and validated method was then successfully applied to the determination of BMDM and OC in an aqueous cream base, typically used in sunscreens, after photostability testing, according to the ICH Guideline Q1B. In addition, the diketo-enol ratio of BMDM in methanol-d ₄ was determined by NMR and the two major photodegradants were identified by FTMS and LC–MS.

     

Quality by Design approach in the development of a solvent-modified micellar electrokinetic chromatography method: Finding the design space for the determination of amitriptyline and its impurities

A solvent-modified micellar electrokinetic chromatography method was set up for the simultaneous determination of the tricyclic antidepressant amitriptyline (AMI) and its main impurities. The method was developed following Quality by Design (QbD) principles according to ICH Guideline Q8(R2). QbD approach made it possible to find the design space (DS), where quality was assured. After a scouting phase, aimed at selecting a suitable capillary electrophoresis pseudostationary phase, risk assessment tools were employed to define the critical process parameters (CPPs) to be considered in a screening phase (applied voltage, concentration and pH of the background electrolyte, concentration of the surfactant sodium dodecyl sulphate, of the cosurfactant n-butanol and of the organic modifiers acetonitrile and urea). The effects of the seven selected CPPs on critical quality attributes (CQAs), namely resolution values between critical peak pairs and analysis time, were investigated throughout the knowledge space by means of a symmetric screening matrix. Response surface study was then carried out on four selected CPPs by applying a Doehlert Design. Monte-Carlo simulations were performed in order to estimate the probability of meeting the desired specifications on CQAs, and thus to define the DS by means of a risk of failure map. Additional points at the edges of the DS were tested in order to verify the requirements for CQAs to be fulfilled. A control strategy was implemented by defining system suitability tests. The developed method was validated following ICH Guideline Q2(R1), including robustness assessment by Plackett–Burman design, and was applied to the analysis of real samples of amitriptyline coated tablets.     

Influence of the photostabilizer in the photoprotective effects of a formulation containing UV-filters and vitamin A

Vitamin A palmitate has been used in cosmetics; however, studies report that this substance shows photoreactivity that can lead to loss of safety and efficacy. On the other hand, photostabilizers have been used to increase sunscreen photostability and consequently their safety and effectiveness. Thus, this study aimed to evaluate the influence of photostabilizers on the photoprotective effects of a cosmetic formulation containing UV-filters and vitamin A palmitate. The formulation containing UV-filters was supplemented with vitamin A palmitate and the photostabilizers diethylhexyl 2,6-naphthalate (DEHN), bumetrizole and benzotriazolyl dodecyl p-cresol (BTDC). Hairless mice were treated daily by topical applications and irradiated (UVA/B). Erythema index, transepidermal water loss, histological/histometric analysis and number of sunburn cells (SBC) were evaluated. The results showed that all formulations protected from UV-induced enhancement of erythema and SBC but there was no difference among them. The formulation with no stabilizers reduced viable epidermis thickness due to atrophy induced by UV radiation. Thus, it can be concluded that the presence of photostabilizers influenced the effects of formulations containing UV-filters and vitamin A palmitate, which could be seen by histological and histometric analysis. Furthermore, the formulations containing the stabilizers DEHN and BTDC showed better protective effects on hairless mice skin.     

The Photostabilizing Effect of Grape Seed Extract on Three Common Sunscreen Absorbers

The photostabilizing ability of grape seed extract on three common sunscreen absorbers, 2‐ethylhexyl‐p‐methoxycinnamate (EHMC), benzophenone‐3 (BP3) and tert‐butylmethoxy dibenzoylmethane (BMDBM), was investigated. Samples were exposed to simulated solar radiation and monitored by spectrophotometric and chromatographic methods. The chemical composition of the grape seed extract was determined by GC‐MS and HPLC‐MS, and the major secondary metabolites were found to be epicatechin and catechin. Exposure of the extract to UV radiation increased the UV absorption capacity of the extract. All sunscreens showed an improved photostability in the extract. The inherent photo‐instability of BMDBM when exposed to UV radiation was almost eliminated in the presence of grape seed extract. A mixture of all three sunscreens in the extract showed very high photostability and a red shift covering the entire UVB and UVA regions, thereby improving the broad‐spectrum protection. The incorporation of grape seed extract in sunscreen and other cosmetic formulations for topical application boosts photoprotection by stabilizing the UV filters and enhancing broad‐spectrum coverage. This in turn helps in reducing the amounts of absorbers and other additives incorporated in a sunscreen product and consequently lowers the risk of an unprecedented buildup of photoproducts whose toxicities are currently unknown.     

Development,Validation and Application of an ICP-SFMS Method for the Determination of Metals in Protein Powder Samples,Sourced in Ireland,with Risk Assessment for Irish Consumers

A method has been developed, optimised and validated to analyse protein powder supplements on an inductively coupled plasma-sector field mass spectrometer (ICP-SFMS), with reference to ICH Guideline Q2 Validation of Analytical Procedures: Text and Methodology. This method was used in the assessment of twenty-one (n = 21) elements (Al, Au, Ba, Be, Bi, Cd, Co, Cr, Cu, Fe, Hg, Li, Mg, Mn, Mo, Pb, Pt, Sn, Ti, Tl, V) to evaluate the safety of thirty-six (n = 36) protein powder samples that were commercially available in the Irish marketplace in 2016/2017. Using the determined concentrations of elements in samples (µg·kg⁻¹), a human health risk assessment was carried out to evaluate the potential carcinogenic and other risks to consumers of these products. While the concentrations of potentially toxic elements were found to be at acceptable levels, the results suggest that excessive and prolonged use of some of these products may place consumers at a slightly elevated risk for developing cancer or other negative health impacts throughout their lifetimes. Thus, the excessive use of these products is to be cautioned, and consumers are encouraged to follow manufacturer serving recommendations.     

Modulation of the Biocatalytic Properties of a Novel Lipase from Psychrophilic Serratia sp. (USBA-GBX-513) by Different Immobilization Strategies

In this work, the effect of different immobilization procedures on the properties of a lipase obtained from the extremophilic microorganism Serratia sp. USBA-GBX-513, which was isolated from Paramo soils of Los Nevados National Natural Park (Colombia), is reported. Different Shepharose beads were used: octyl-(OC), octyl-glyoxyl-(OC-GLX), cyanogen bromide (BrCN)-, and Q-Sepharose. The performance of the different immobilized extremophile lipase from Serratia (ESL) was compared with that of the lipase B from Candida antarctica (CALB). In all immobilization tests, hyperactivation of ESL was observed. The highest hyperactivation (10.3) was obtained by immobilization on the OC support. Subsequently, the thermal stability at pH 5, 7, and 9 and the stability in the presence of 50% (v/v) acetonitrile, 50% dioxane, and 50% tetrahydrofuran solvents at pH 7 and 40 °C were evaluated. ESL immobilized on octyl-Sepharose was the most stable biocatalyst at 90 °C and pH 9, while the most stable preparation at pH 5 was ESL immobilized on OC-GLX-Sepharose supports. Finally, in the presence of 50% (v/v) tetrahydrofuran (THF) or dioxane at 40 °C, ESL immobilized on OC-Sepharose was the most stable biocatalyst, while the immobilized preparation of ESL on Q-Sepharose was the most stable one in 40% (v/v) acetonitrile.     

Simultaneous Determination of Enalapril and Losartan in Pharmaceutical Preparations by UV Spectrophotometry and LC

The simultaneous determination of enalapril (Ena) and losartan (Los) in solid dosage forms were done by two methods. The first method involves spectrophotometric determination using the simultaneous equation method at 222 and 250 nm for Ena and Los, respectively. The second method involved an RP-LC method of analysis using methanol:water:acetonitrile (45:35:20% v/v) as the mobile phase. Both methods were satisfactorily validated as per ICH guidelines.     

Determination of pK a Values of Cefdinir and Cefixime by LC and Spectrophotometric Methods and Their Analysis in Pharmaceutical Dosage Forms

The pK _a values of cefdinir and cefixime, which are used in the treatment of bacterial infections, have been determined precisely in water and methanol?Cwater binary mixtures (20% v/v) using spectrophotometric titration and LC, respectively. A simple, fast and precise isocratic high-performance liquid chromatographic (LC) procedure has been developed for the determination of cefdinir and cefixime in drug formulations. This method was validated successfully for specificity, precision, linearity, range, accuracy, limit of detection, and limit of quantitation as per the ICH guidelines. The proposed method can be used for routine analysis of studied cephalosporin compounds and as an alternative tool for drug quality control laboratories.     

Photostability enhancement by encapsulation of α-tocopherol into lipid-based nanoparticles loaded with a UV filter

The aim of this study was to develop some sunscreen formulations able to maintain their photoprotection when exposed to UV radiation. In this context, the influence of the antioxidant α-tocopherol on the photostability of lipid-based nanoparticles, namely solid lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs), encapsulated with a UVA filter, has been investigated. The nanoparticles co-encapsulated with both actives exhibited dimensions smaller than 200 nm and zeta potentials of –45 mV. The photoprotection of the creams based on lipid nanoparticles was evaluated in terms of two protection factors, SPF and erythemal UVA–PF. By exposing the creams to UV radiation, it was observed that tocopherol results in obtaining quite stable formulations, but it does not improve the overall photoprotection much. However, by adding the antioxidant to the formulation confers a double action: protection of the skin against reactive oxygen species and the photostabilization of the UVA filter into lipid nanoparticles.     

Photochemical properties of UV-absorbing chemicals in phase-controlled polymer microspheres

In this study, a different UV (ultra-violet) ray absorption system is presented in which butyl methoxydibenzoylmethane (BMDM, a model UV-A absorbent, 320–400 nm) is stabilized in phase-controlled poly(methyl methacrylate) (PMMA) microspheres. The photochemistry of BMDM in the microspheres was investigated considering its phase characteristics therein. Analysis by differential scanning calorimetry and X-ray diffraction showed that the BMDM in the microspheres was present in a non-crystalline state. The phase control of BMDM in the polymer microspheres has an excellent ability to protect against UV-A, whilst maintaining its photostability and thermal stability. The results obtained in this study illustrate well that the phase control of the UV absorbents in polymer microspheres is another key factor that determines their photochemistry and photostability in the final formulations.     

Development of a Stability-Indicating RP-LC Method for Determination of Betamethasone Dipropionate and Estimation of Its Related Compounds in a Dermatological Pharmaceutical Product

A new stability-indicating reversed-phase LC method has been developed and validated for the assay and identification of betamethasone dipropionate and its related compounds in a dermatological pharmaceutical drug product, namely Diprolene Ointment. Separation of all the peaks of interest was achieved on a Symmetry Shield RP18 (100 mm × 4.6 mm, 3.5 µm) column using a gradient elution at a flow rate of 1.5 mL min^?1 with mobile phase A (10 mM monobasic sodium phosphate at pH 2.5) and mobile phase B (acetonitrile) and UV detection at 250 nm. The limit of detection (LOD) and limit of quantitation (LOQ) of this method was 0.00004  and 0.0001 mg mL^?1, respectively. The method was successfully validated in accordance with ICH guidelines and was accurate, linear, precise, reproducible, specific, and robust. A simple, reproducible and accurate single step sample extraction procedure using tetrahydrofuran, water, and methanol (40:30:30, v/v/v) was developed to extract betamethasone dipropionate and its related compounds from the ointment. The sample extraction procedure and the LC conditions presented in this report can be used for routine analysis of Diprolene Ointment in quality control laboratories. This method may also be applied to other dermatological pharmaceutical drug products “as-is” or with minor modification.     

A Validated Chiral LC Method for the Enantiomeric Separation of Cinacalcet Hydrochloride

A rapid isocratic chiral LC method has been developed for the separation of (S)-cinacalcet from (R)-cinacalcet. Good resolution with R _S  > 3 was obtained using a Chiralpak-IA column (250 × 4.6 mm, particle size 5 μm) and n-hexane, ethanol and trifluoroacetic acid as the mobile phase (95:5:0.1, v/v) at ambient temperature. Flow rate was kept at 1.0 mL min^–1 and elution was monitored by UV detection at 223 nm. This method was further used to determine the presence of (S)-cinacalcet in enantiopure pharmaceutical formulations containing (R)-cinacalcet. This method allowed for the detection and quantitation of (S)-cinacalcet of levels at 0.04 and 0.16 μg mL^–1, respectively. The method was validated following ICH guidelines.     

Simultaneous Determination of Losartan Potassium, Atenolol and Hydrochlorothiazide in Pharmaceutical Preparations by Stability-Indicating UPLC

A stability-indicating UPLC method was developed for the simultaneous quantitative determination of losartan potassium, atenolol, and hydrochlorothiazide in pharmaceutical dosage forms in the presence of degradation products. The separation was achieved on a simple isocratic method (water: acetonitrile: triethyl amine: ortho phosphoric acid (60:40:0.1:0.1, v/v) at 0.7 mL min^?1, a detection wavelength of 225 nm). The retention times of losartan potassium, atenolol, and hydrochlorothiazide were 2.3, 0.6 and 0.9 min. The total runtime was 3 min. Losartan potassium, atenolol, and hydrochlorothiazide were subjected to different ICH prescribed stress conditions. The method was validated with respect to linearity, accuracy, precision, robustness and ruggedness.     

Development and Validation of Stability-Indicating HPLC Methods for the Estimation of Lomefloxacin and Balofloxacin Oxidation Process under ACVA,H2O2, or KMnO4 Treatment. Kinetic Evaluation and Identification of Degradation Products by Mass Spectrometry

The oxidation of lomefloxacin (LOM) and balofloxacin (BAL) under the influence of azo initiator of radical reactions of 4,4′-azobis(4-cyanopentanoic acid) (ACVA) and H₂O₂ was examined. Oxidation using H₂O₂ was performed at room temperature while using ACVA at temperatures: 40, 50, 60 °C. Additionally, the oxidation process of BAL under the influence of KMnO₄ in an acidic medium was investigated. New stability-indicating HPLC methods were developed in order to evaluate the oxidation process. Chromatographic analysis was carried out using the Kinetex 5u XB—C18 100A column, Phenomenex (Torrance, CA, USA) (250 × 4.6 mm, 5 μm particle size, core shell type). The chromatographic separation was achieved while using isocratic elution and a mobile phase with the composition of 0.05 M phosphate buffer (pH = 3.20 adjusted with o-phosphoric acid) and acetonitrile (87:13 v/v for LOM; 80:20 v/v for BAL). The column was maintained at 30 °C. The methods were validated according to the ICH guidelines, and it was found that they met the acceptance criteria. An oxidation process followed kinetics of the second order reaction. The most probable structures of LOM and BAL degradation products formed were assigned by the UHPLC/MS/MS method.     

An LC Method for Quantification of 2,3-Dichlorobenzoyl Cyanide and Its Related Regio Isomers

A simple, sensitive and selective gradient reversed phase LC method has been developed for separation and determination of 2,3-dichlorobenzoyl cyanide and its regio isomers which is an intermediate of lamotrigine pure form. The separation was achieved on a reversed phase C-18 column using 0.01 M ammonium acetate buffer at pH 5.5 and methanol (50:50 v/v) mixture as solution A and methanol, water mixture (90:10 v/v) as solution B in a gradient elution at a flow rate of 1.5 mL min^?1 with UV detection at 215 nm. The method is found to be selective, precise, linear, accurate and also robust. It was not only used for quality assurance, but also monitoring the synthetic reactions involved in the process development of Lamotrigine. The LC method is found to be simple, rapid, specific and reliable for the determination of unreacted levels of raw materials and isomers in reaction mixtures and finished product Lamotrigine. The method was fully validated as per ICH guidelines and results from validation confirm that the method is highly suitable for its intended purpose.     

Sequential injection analysis for benzophenone-4 and phenylbenzimidazole sulphonic acid in sunscreen sprays by solid-phase extraction coupled with ultraviolet spectrometry

A sequential injection UV method was developed to determine benzophenone-4 (BZ4) and phenylbenzimidazole sulphonic acid (PBS) simultaneously, these being the most commonly used UV-filters in aqueous formulations used as sunscreen sprays. The selective elution of both was performed by on-line solid-phase extraction, by retention on a SAX microcolumn and separation by varying the pH of elution. The sensitivity obtained was 0.042±0.001 ml μg⁻¹ for PBS and 0.0159±0.0003 ml μg⁻¹ for BZ4. The limit of detection was 1.6 μg ml⁻¹ for PBS and 0.6 μg ml⁻¹ for BZ4. The R.S.D. of the results was 1-6% for PBS and 1-12% for BZ4. The method was validated using commercial sunscreen formulations with concentrations determined by a liquid chromatographic procedure. The two procedures gave comparable results. Automation of the method means the amount of reagents used and residues generated are decreased. The system allows the required analysis sequence to be programmed using suitable software.     

Stress Studies and Identification of Degradation Products of Cephalexin Using LC–PDA and LC–MS/MS

A stability indicating RP-HPLC method for cephalexin has been developed and validated to identify and characterize potential degradation products. Drug was subjected to hydrolytic (acidic, basic, and neutral), oxidative, thermal, and photolytic stresses as per ICH guidelines Q1A (R2) and Q1B. Chromatographic separation was achieved on C8 column with mixture of ammonium acetate buffer pH 4.5 and acetonitrile in gradient mode as a mobile phase with PDA detection. Specificity of the method was established by peak purity studies. Method was validated as per ICH guideline Q2 (R1) for accuracy, precision, linearity, sensitivity, and robustness. Kinetics for each degradation condition was studied with respect to order of reaction and rate constant. Method was found to comply with acceptance criteria of validation parameters with respect to specificity (peak purity greater than 0.999) linearity (r ² greater than 0.99), accuracy (% recovery in the range of 98–102%), and precision (% RSD not more than 2). A total of six degradation products were generated in different stress conditions; these were identified and structures were proposed using LC–MS/MS. Cephalexin undergoes degradation in almost all the conditions. The developed stability indicating method is suitable for analysis of stability samples as it adequately separates all degradation products. Degradation products generated in photolytic and oxidative conditions are reported for the first time.     

Validation of an LC-MS/MS method for the quantitative determination of mavoglurant (AFQ056) in human plasma

A simple, sensitive, and selective liquid chromatography/tandem mass spectrometry method was validated for the identification and quantification of mavoglurant (AFQ056) in human plasma. The chromatographic separation was performed using a Cosmosil 5 C18 (150?×?4.6 mm, 5 μm) column at 40?±?0.5 °C with a mobile phase consisting of acetic acid in water (0.1 %, v/v)/methanol (10:90, v/v) with a flow rate of 1.0 mL/min followed by quantification with tandem mass spectrometry, operating with electrospray ionization in positive ion mode and applying multiple reaction monitoring. The validated method described in this paper presents high absolute recovery with precision and accuracy meeting the acceptance criteria. The method was precise and accurate for 2- and 10-fold dilution of samples. The method was validated using sodium heparin as specific anticoagulant, and the anticoagulant effect was tested by lithium heparin and K₃EDTA. The method was successfully cross-validated between two bioanalytical sites. The method was specific for mavoglurant within the given criteria for acceptance (apparent peak area at the retention time of mavoglurant in zero samples was less than 20 % compared with the mean peak area at LLOQ) in human plasma. The method was fully validated for the quantitative determination of mavoglurant in human plasma between the range of 2.00 and 2,500 ng/mL.     

Development and Validation of a New LC Method for Analysis of Brimonidine Tartrate and Related Compounds

A novel liquid chromatographic method for analysis three potential impurities in brimonidine tartrate drug substance has been developed and validated. Efficient chromatographic separation was achieved on a C₈ column (250 mm × 4.6 mm, 5-μm particles) with a simple mobile-phase gradient at a flow rate of 1.0 mL min^?1. Quantification was achieved by use of ultraviolet detection at 248 nm. Resolution between brimonidine tartrate and its three potential impurities was greater than 3.0. Regression analysis showed the r value (correlation coefficient) was >0.999 for brimonidine and its three impurities. The method was capable of detecting all three impurities of brimonidine tartrate at levels below 0.07 μg in a test concentration of brimonidine tartrate of 1.0 mg mL^?1 and for an injection volume of 10 μL. A solution of brimonidine tartrate in acetonitrile–water 2:8 (v/v) was stable for 48 h. The drug was subjected to stress conditions as prescribed by the ICH. Degradation was found to occur slightly under oxidative stress conditions but the drug was stable to aqueous, acidic, and basic hydrolysis, and photolytic and thermal stress. The assay of the stressed samples was calculated relative to a qualified reference standard and the mass balance was found close to 99.8%. The method was validated for linearity, accuracy, precision, and robustness.     

Stability-Indicating LC–PDA Method for Determination of Picrosides in Hepatoprotective Indian Herbal Preparations of Picrorhiza kurroa

A liquid chromatography method was developed and validated for the determination of picroside-I and picroside-II in herbal preparations containing Picrorhiza kurroa as one of the ingradients. Resolution of picrosides was achieved on a reversed phase (C-18) endcapped bidentate column by using a mobile phase of acetonitrile: water (25:75 v/v). The detection of picrosides was carried out at 270 nm. The method was validated for precision, accuracy and robustness according to the International Conference on Harmonization (ICH) guidelines and is applicable for the quality control of preparations containing P. kurroa. Analysis of samples in forced degradation proved it to be applicable for stability evaluation. The linear regression analysis data showed good linear relationship (r ² = 0.9999 ± 0.0010 for picroside-I and 0.9997 ± 0.0012 for picroside-II) in the concentration range of 0.4–4.0 μg. The limit of detection and quantification for picroside-I and picroside-II were recorded to be 28.1 and 73.1 ng and 85.2 and 221.5 ng, respectively. Satisfactory recovery results were observed from the herbal preparations (97.5–100.5%). Intra- and inter- day precision of the method was acceptable, with relative standard deviation (%RSD) values in the range of 0.04–1.16% and 0.03–0.27%, respectively.