Radical copolymerization of 2‐trifluoromethylacrylic monomers. II. Kinetics,monomer reactivities,and penultimate effect in their copolymerization with norbornenes and vinyl ethers

Radical copolymerizations of electron‐deficient 2‐trifluoromethylacrylic (TFMA) monomers, such as 2‐trifluoromethylacrylic acid and t‐butyl 2‐trifluoromethylacrylate (TBTFMA), with electron‐rich norbornene derivatives and vinyl ethers with 2,2′‐azobisisobutyronitrile as the initiator were investigated in detail through the analysis of the kinetics in situ with ¹H NMR and through the determination of the monomer reactivity ratios. The norbornene derivatives used in this study included bicyclo[2.2.1]hept‐2‐ene (norbornene) and 5‐(2‐trifluoromethyl‐1,1,1‐trifluoro‐2‐hydroxylpropyl)‐2‐norbornene. The vinyl ether monomers were ethyl vinyl ether, t‐butyl vinyl ether, and 3,4‐dihydro‐2‐H‐pyran. Vinylene carbonate was found to copolymerize with TBTFMA. Although none of the monomers underwent radical homopolymerization under normal conditions, they copolymerized readily, producing a copolymer containing 60–70 mol % TFMA. The copolymerization of the TFMA monomer with norbornenes and vinyl ethers deviated from the terminal model and could be described by the penultimate model. The copolymers of TFMA reported in this article were evaluated as chemical amplification resist polymers for the emerging field of 157‐nm lithography. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1478–1505, 2004     

Preparation of reactive block copolymers and their transformation to hollowed nanostructures

A novel polymeric hollow nanostructure was generated using micellar template method through a three‐step procedure. First, the block copolymers were synthesized via ring‐opening metathesis polymerization by sequentially adding monomers 7‐oxanorborn‐5‐ene‐exo‐exo‐2,3‐dicarboxylic acid dimethyl ester and the mixture of norbornene and 2,3‐bis(2‐bromoisobutyryloxymethyl)‐5‐norbornene in chloroform, and also atom transfer radical polymerization of 4‐(3‐butenyl)styrene was carried out by using the as‐obtained block copolymer poly(7‐oxanorborn‐5‐ene‐exo,exo‐2,3‐dicarboxylic acid dimethylester)‐block‐poly(norbornene‐co‐2,3‐bis(2‐bromoisobutyryloxymethyl)‐5‐norbornene as macroinitiator to afford a graft copolymer bearing poly(4‐(3‐butenyl)styrene) branch poly(7‐oxanorborn‐5‐ene‐exo,exo‐2,3‐dicarboxylic acid dimethylester)‐block‐poly(norbornene‐co‐2,3‐bis(2‐bromoisobutyryloxymethyl)‐5‐norbornene)‐graft‐poly(4‐(3‐butenyl)styrene). Second, the shell‐crosslinked micelles were prepared by ruthenium‐mediated ring‐closing metathesis of poly(4‐(3‐butenyl)styrene) branches in intramicelle formed from the copolymers self‐assembly spontaneously in toluene. Finally, the hollowed spherical nanoparticles were presented by removing the micellar copolymer backbone through the cleavage of the ester bonds away from the crosslinked network of branches. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Norbornene‐functionalized PEO‐b‐PCL: A versatile platform for mikto‐arm star,umbrella‐like,and comb‐like graft copolymers

Well‐defined in‐chain norbornene‐functionalized poly(ethylene oxide)‐b‐poly(?‐caprolactone) copolymers (NB‐PEO‐b‐PCL) were synthesized from a dual clickable containing both hydroxyl‐ and alkyne‐reactive groups, namely heterofunctional norbornene 3‐exo‐(2‐exo‐(hydroxymethyl)norborn‐5‐enyl)methyl hexynoate. A range of NB‐PEO‐b‐PCL copolymers were obtained using a combination of orthogonal organocatalyzed ring‐opening polymerization (ROP) and click copper‐catalyzed azide–alkyne cycloaddition (CuAAC). Ring‐opening metathesis polymerization (ROMP) of NB‐PEO‐b‐PCL macromonomers using ruthenium‐based Grubbs’ catalysts provides comb‐like and umbrella‐like graft copolymers bearing both PEO and PCL grafts on each monomer unit. Mikto‐arm star A₂B₂ copolymers were obtained through a new strategy based on thiol–norbornene photoinitiated click chemistry between 1,3‐propanedithiol and NB‐PEO‐b‐PCL. The results demonstrate that in‐chain NB‐PEO‐b‐PCL copolymers can be used as a platform to prepare mikto‐arm star, umbrella‐, and comb‐like graft copolymers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 4051–4061     

Synthesis and copolymerization of oligo(lactic acid) derived norbornene macromonomers with amino acid derived norbornene monomer: Formation of the 3D macroporous scaffold

Norbornene macromonomers 2 and 3 bearing 10‐ and 20‐mers of lactide were synthesized by ring‐opening polymerization of lactide using 5‐norbornene‐2, 3‐exo‐exo‐dimethanol as an initiator and DBU as a catalyst. Macromonomers 2 and 3 were copolymerized with amino acid derived norbornene monomer 1 , using the Grubbs 2nd generation ruthenium catalyst. The random and block copolymers with M_n's ranging from 28,000 to 180,000 were obtained almost quantitatively where the M_n's of the block copolymers were higher than those of the random ones. Three‐dimensional macroporous structure polymers with average pore size of 10 µm could be found in poly( 1 ) and the block co‐polymer of 1 and 2 or 1 and 3 at the high ratio of 1 . Meanwhile, poly( 2 ) and poly( 3 ) along with block and random copolymers with low ratio of 1 exhibit much larger pores in the range of 50–300 µm. The porosity increased with increase in the unit ratio of 1 . The compressive strength of the porous structure of poly( 2 ) and poly( 3 ) was improved by the copolymerization with 1 . © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1660–1670     

Functionalization of vinylic addition polynorbornenes via efficient copolymerization of norbornene using Ni(II)‐Me complexes

The facile and efficient functionalization of polynorbornene has been achieved through direct copolymerization of norbornene (NB) with 5‐norbornene‐2‐yl acetate (NBA) or 5‐norbornene‐2‐methanol (NBM) using a series of β‐ketiminato Ni(II)‐Me pyridine complexes 1–4 (Scheme 2 ) in the presence of B(C₆F₅)₃. Remarkably, the monomer conversion could reach up to about 96% in 10 min in the NB/NBA copolymerization. The copolymers with wide NBA contents (3.3–38.4 mol %) were obtained by variation of reaction conditions. These copolymers have high molecular weights (MWs) (M_n = 41.8–144 kg/mol) and narrow MW distributions (M_w/M_n = 1.80–2.27). In the absence of alkyl aluminum compounds, a monomer conversion of 81% was observed in the NB/NBM copolymerization, and copolymers with NBM content in the range of 11.2–21.8 mol % were obtained by variation of reaction conditions. In addition, Ni(II)‐Me pyridine complexes 2 was very active at a low B/Ni molar ratio of 6, while bis‐ligand complex 6 bearing the same ligand just showed moderate efficiency at a high B/Ni molar ratio of 20. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and helical properties of N‐substituted p‐benzamide random copolymers possessing chiral/achiral and (S)/(R) side chains

Random copolymers of poly(p‐benzamide)s having a methyl‐substituted tri(ethylene glycol) unit as a chiral side chain and a nonsubstituted tri(ethylene glycol) or branching alkyl unit as an achiral side chain were synthesized by copolymerization of N‐substituted 4‐aminobenzoic acid ester monomers with a base in the presence of an initiator. Copolymerizations of the chiral (S)‐monomer with N‐tri(ethylene glycol) achiral monomer and with the racemic monomer were carried out by the addition of a mixture of two monomers and an initiator to a solution of a base all at once, affording the corresponding random copolymers. On the other hand, random copolymerization of the chiral monomer with monomer having an achiral branching alkyl side chain required dropwise addition of the achiral monomer to a mixture of the chiral monomer, the initiator, and the base. These copolymers formed helical structures, but analysis of the CD spectra indicated the absence of cooperativity between the monomer units along the copolymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Polynorbornene with pentafluorophenyl imide side chain groups: Synthesis and sulfonation

The mixtures of exo‐endo‐monomers and isomerically pure endo‐monomers of N‐pentafluorophenyl‐norbornene‐5,6‐dicarboximide ( 2a ) and N‐phenyl‐norbornene‐5,6‐dicarboximide ( 2b ) were synthesized and polymerized via ring opening metathesis polymerization using bis(tricyclohexylphosphine) benzylidene ruthenium ( IV ) dichloride ( I ) and tricyclohexylphosphine [1,3‐bis(2,4,6‐trimethylphenyl)‐4,5‐dihydroimidazol‐2‐ylidene][benzylidene] ruthenium dichloride ( II ). Ring opening metathesis polymerization of mixtures of exo‐endo‐monomers ( 2a ) and ( 2b ) and pure endo‐ 2b gave the corresponding high molecular weights poly(N‐pentafluorophenyl‐norbornene‐5,6‐dicarboximide) ( 3a ) and poly(N‐phenyl‐norbornene‐5,6‐dicarboximide) ( 3b ). The isomerically pure endo‐ 2a did not polymerize by I in these conditions, since I is the least active catalyst and endo‐ 2a is the least active monomer because of the intramolecular complex formation between the Ru active center and the fluorine atom of ring‐opened endo‐ 2a on the one hand and steric hindrances caused by the pentafluorinated ring on the other. The quantitative hydrogenation of the polymer 3a , at room temperature and 115 bar, was achieved by a Wilkinson's catalyst. The new polynorbornene bearing highly fluorinated sulfonic acid groups (5) was obtained by the reaction of the hydrogenated poly(N‐pentafluorophenyl‐norbornene‐5,6‐dicarboximide) (4) with sodium 4‐hydroxybenzenesulfonate dihydrate. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2925–2933, 2010     

Image formation by dyeing of copolymers bearing photogenerated acid and base groups with dye bath containing acid and basic dyes

Copolymers bearing photoacid generating groups and/or photobase generating groups were dyed after UV irradiation with a dye bath containing both an acid dye and a basic dye. Acetophenone O‐acryloyloxime (AAPO) was used as a monomer bearing acyloxyimino (AOI) group that generates a primary amino group upon irradiation, which is followed by hydrolysis. Phenacylsulfonylstyrene (PSSt) and 1,2,3,4‐tetrahydronaphthylideneamino p‐styrenesulfonate (NISS) were chosen as monomers having β‐keto sulfone (β‐KS) and iminosulfonate (IS) groups, respectively, which yielded acid groups when irradiated. Copolymers of AAPO and methyl methacrylate (MMA) were dyed with only the acid dye, and those of PSSt or NISS were dyed with only the basic dye after irradiation. AAPO‐PSSt‐MMA films became dyeable with the acid dye when irradiated for a short time and with the basic dye with further irradiation. However, AAPO‐NISS‐MMA copolymers showed the reverse dyeing behavior. IR spectra revealed that AOI groups were photochemically decomposed prior to the β‐KS groups for AAPO‐PSSt‐MMA, and AOI and IS groups decomposed simultaneously for AAPO‐NISS‐MMA. These results suggested the possibility of adsorption of different ionic dyes on the films by a change of irradiation time; in fact, color patterns could be obtained in a single staining process using the dye bath. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3043–3051, 2000     

One‐pot synthesis of polymeric nanoparticle by ring‐opening metathesis polymerization

Shell‐functionalized polymeric nanoparticle was prepared through the method of polymerization‐induced self‐assembly of block copolymers [poly(2,3‐bis(2‐bromoisobutyryloxymethyl)‐5‐norbornene)‐block‐poly(7‐oxanorborn‐5‐ene‐exo‐exo‐2,3‐dicarboxylic acid dimethyl ester), PBNBE‐b‐PONBDM] via one‐pot ring‐opening metathesis polymerization of 2,3‐bis(2‐bromoisobutyryloxymethyl)‐5‐norbornene (BNBE) and 7‐oxanorborn‐5‐ene‐exo‐exo‐2,3‐dicarboxylic acid dimethyl ester (ONBDM) in a selective solvent. The compositions and the molecular weights of the copolymers were estimated by ¹H‐NMR and gel permeation chromatography. The micelles were characterized by dynamic light scattering, transmission electron micrograph, and atomic force microscopy. The results indicated that the spherical micelles constructed with bromine‐bearing PBNBE shell and PONBDM core were stable and reproducible in toluene. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of AB‐type block copolymers containing benzoxazole and anthracene groups by ATRP and fluorescent property

Two functional monomers, methacrylic acid 4‐(2‐benzoxazol)‐benzyl ester (MABE) containing the benzoxazole group and 4‐(2‐(9‐anthryl))‐vinyl‐styrene (AVS) containing the anthracene group were synthesized by rational design. The MABE was polymerized via atom transfer radical polymerization (ATRP) using ethyl 2‐bromoisobutyrate (EBIB) as initiator in CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) catalyst system; block copolymers poly(MABE‐b‐AVS) was obtained, which was conducted by using poly(MABE) as macro‐initiator, AVS as the second monomer, and CuBr/PMDETA as catalyst. The constitute of two monomers in block copolymers poly(MABE‐b‐AVS) by ATRP could be adjusted, that is the constitute of the benzoxazole group and the anthracene group could be controlled in AB‐type block copolymers. Moreover, the fluorescent properties of homopolymers poly(MABE) and block copolymers poly(MABE‐b‐AVS) were discussed herein. With the excitation at λ_ex = 330 nm, the fluorescent emission spectrum of poly(MABE) solution showed emission at 375 nm corresponding to the benzoxazole‐based part; with the same excitation, the fluorescent emission spectrum of poly(MABE‐b‐AVS) solution showed a broad peek at 330–600 nm when the monomer AVS to the total monomers mole ratio was 0.31, and the fluorescent emission spectrum of poly(MABE‐b‐AVS) in film state only showed one peak at 525 nm corresponding to the anthracene‐based unit that indicated a complete energy transfer from the benzoxazole group to the anthracene group. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3894–3901, 2007     

Novel route to styrene/p‐aminostyrene copolymers

A novel route to styrene/p‐aminostyrene copolymers is described that involves the introduction of amino functionality into the structure of pure monodisperse polystyrene. The simple two‐step synthesis involves the introduction of a bromo group into the aromatic ring by electrophilic substitution and then a palladium‐catalyzed reaction with LiN(SiMe₃)₂ followed by an acid and base treatment to release the free amine. All reactions are carried out at room temperature. This approach avoids the difficulties often associated with the preparation of copolymers from incompatible monomers. The technique also gives a product with a precisely known molecular weight and polydispersity, important parameters governing many physical properties. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1282–1286, 2007     

Pd (II)‐catalyzed vinyl addition polymerization of novel functionalized norbornene bearing dimethyl carboxylate groups

Three novel functionalized polynorbornenes (PNB) with pendant dimethyl carboxylate group (carboxylates—acetate, propionate, and butyrate) are synthesized as a vinyl‐type with a palladium (II) catalyst in high yield. The effects of size of substitutents, molar ratio of monomer to catalyst, solvent polarity, reaction time, and temperature on the polymerization of exo‐norbornene dimethyl propionate were systematically investigated. The low molar ratio and temperature, as well as high polarity of solvent, and long reaction time, are favorable for the enhancement of the monomer conversion, especially, the solvent have an obvious effect on the catalyst activity. The resulting poly(cis‐norbornene‐exo‐2,3‐dimethyl carboxylates) (PNB‐dimethyl carboxylates) show good solubility in common organic solvent and high thermal stability up to 360 °C. The glass transition temperature was detected by DMA at 331, 324, and 318 °C for acetate, propionate, and butyrate, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3391–3399, 2007     

A novel synthetic strategy for copolymers of vinyl alcohol: Radical copolymerization of alkoxyvinylsilanes with styrene and oxidative transformation of C?Si(OR)2Me into C?OH in the copolymers to afford poly(vinyl alcohol‐ran‐styrene)s

As a novel synthetic strategy for copolymers of vinyl alcohol, we propose herein copolymerization of alkoxyvinylsilanes with other vinyl monomers, followed by oxidative cleavage of the alkoxysilyl groups attached to the main chain of the resulting copolymers. Radical copolymerization of di(isobutoxy)methylvinylsilane 1 with styrene afforded poly( 1 ‐ran‐styrene)s with a variety of compositions of both repeating units, although the M_n's (<9000) and yields (<35%) were rather low. The oxidative cleavage of the alkoxysilyl groups in the copolymers with m‐chloroperbenzoic acid proceeded efficiently, giving poly(vinyl alcohol‐ran‐styrene)s, which were soluble in common organic solvents. The structures of the poly(vinyl alcohol‐ran‐styrene)s were characterized by NMR, GPC, elemental analysis, and matrix‐assisted laser desorption time‐of‐flight mass spectrometry (MALDI‐TOF‐MS). © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3648–3658, 2007     

Statistical copolymers of norbornene and 5‐vinyl‐2‐norbornene by a ditungsten complex mediated ring‐opening metathesis Polymerization: Synthesis,thermal properties,and kinetics of thermal decomposition

Statistical copolymers of norbornene (NBE) with 5‐vinyl‐2‐norbornene (VNBE) were prepared by ring‐opening metathesis polymerization, employing the triply bonded ditungsten complex Na[W₂(μ‐Cl)₃Cl₄(THF)₂].(THF)₃. NMR measurements revealed that the side vinyl groups of the VNBE monomer remain intact during the copolymerization reaction. The reactivity ratios were estimated using the Finemann–Ross (FR), the inverted FR, and the Kelen–Tüdos graphical methods. Structural parameters of the copolymers were obtained by calculating the dyad sequence fractions, which were derived using the monomer reactivity ratios. The glass transition temperatures, T_g, of the copolymers were measured by differential scanning calorimetry measurements and were examined in the frame of several theoretical equations allowing the prediction of these T_g values. The best fit was obtained using methods that take into account the monomer sequence distribution of the copolymers. Finally, the kinetics of the thermal decomposition of the copolymers was studied by thermogravimetric analysis in the frame of the Ozawa–Flynn–Wall and Kissinger methods. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4835–4844     

Synthesis and copolymerization of new phosphorus‐containing acrylates

Two phosphorus‐containing acrylate monomers were synthesized from the reaction of ethyl α‐chloromethyl acrylate and t‐butyl α‐bromomethyl acrylate with triethyl phosphite. The selective hydrolysis of the ethyl ester monomer with trimethylsilyl bromide (TMSBr) gave a phosphonic acid monomer. The attempted bulk polymerizations of the monomers at 57–60 °C with 2,2′‐azobisisobutyronitrile (AIBN) were unsuccessful; however, the monomers were copolymerized with methyl methacrylate (MMA) in bulk at 60 °C with AIBN. The resulting copolymers produced chars on burning, showing potential as flame‐retardant materials. Additionally, α‐(chloromethyl)acryloyl chloride (CMAC) was reacted with diethyl (hydroxymethyl)phosphonate to obtain a new monomer with identical ester and ether moieties. This monomer was hydrolyzed with TMSBr, homopolymerized, and copolymerized with MMA. The thermal stabilities of the copolymers increased with increasing amounts of the phosphonate monomer in the copolymers. A new route to highly reactive phosphorus‐containing acrylate monomers was developed. A new derivative of CMAC with mixed ester and ether groups was synthesized by substitution, first with diethyl (hydroxymethyl)phosphonate and then with sodium acetate. This monomer showed the highest reactivity and gave a crosslinked polymer. The incorporation of an ester group increased the rate of polymerization. The relative reactivities of the synthesized monomers in photopolymerizations were determined and compared with those of the other phosphorous‐containing acrylate monomers. Changing the monomer structure allowed control of the polymerization reactivity so that new phosphorus‐containing polymers with desirable properties could be obtained. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2207–2217, 2003     

Cationic copolymerization behavior of cyclic ether monomers with norbornene‐containing cyclic carbonate or spiro–orthoether structure

Cationic ring‐opening copolymerizations of various cyclic ether compounds with volume expanding monomers bearing norbornene backbones [norbornene‐spiro orthocarbonate (N‐SOC) and norbornene‐cyclic carbonate (N‐CC)] were carried out in the presence of a thermally latent initiator 1 . The 10% weight loss decomposition temperatures (T_d10) and the volume changes on the copolymerizations were measured for these resultant products. In the comparison between copolymerizations of bifunctional epoxide 2 with N‐SOC and with N‐CC, it was found that N‐CC served as a more useful volume controllable comonomer than N‐SOC. The copolymerizations with N‐CC yielded the products with a decrease in the volume change (volume shrinkage) and with an increase in the monomer feed ratio of N‐CC; T_d10 was relatively similar to the homopolymer of epoxide 2 and was observed except when the proportion of N‐CC was more than 20% in the monomer feed ratio of N‐CC. In contrast, similar copolymerizations with N‐SOC did not exhibit such tendencies, probably because of the low efficiency of the copolymerization derived from the low miscibility of N‐SOC for the epoxide. The other copolymerization systems of other bi‐ and monocyclic ether compounds ( 3 – 6 and phenyl glycidyl ether) with N‐CC also indicated an almost similar tendency toward that of the copolymerization with epoxide 2 . © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5113–5120, 2004     

Preparation of gradient copolymers via ATRP in miniemulsion. II. Forced gradient

A series of forced gradient copolymers with different controlled distribution of monomer units along the copolymer backbone were successfully prepared by atom transfer radical polymerization in miniemulsion. The newly developed initiation technique, known as activators generated by electron transfer, was beneficial for forced gradient copolymers preparation because all polymer chains were initiated within the miniemulsion droplets and the miniemulsion remained stable throughout the entire polymerization. Various monomer pairs with different reactivity ratios were examined in this study, including n‐butyl acrylate/t‐butyl acrylate, n‐butyl methacrylate/methyl methacrylate, and n‐butyl acrylate/styrene. In each case, the added monomer diffused across the aqueous suspending medium and gradient copolymers with different forced distributions of comonomer units along the polymer backbone were obtained. The shape of the gradient along the backbone of the copolymers was influenced by the molar ratio of the monomers, the reactivity ratio of the comonomers as well as the feeding rate. The shape of the gradient was also affected by the relative hydrophobicities of the comonomers. Copolymerizations exhibited good control for all feeding rates and comonomer feeding ratios, as evidenced by narrow molecular weight distribution (M_w/M_n = 1.20–1.40) and molecular weight increasing smoothly with polymer yield, indicating high initiation efficiency. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1413–1423, 2007     

Comparison of micelles formed by amphiphilic star block copolymers prepared in the presence of a nonmetallic monomer activator

In this article, we describe the synthesis of PEG‐b‐polyester star block copolymers via ring‐opening polymerization (ROP) of ester monomers initiated at the hydroxyl end group of the core poly(ethylene glycol) (PEG) using HCl Et₂O as a monomer activator. The ROP of ε‐caprolactone (CL), trimethylene carbonate (TMC), or 1,4‐dioxan‐2‐one (DO) was performed to synthesize PEG‐b‐polyester star block copolymers with one, two, four, and eight arms. The PEG‐b‐polyester star block copolymers were obtained in quantitative yield, had molecular weights close to the theoretical values calculated from the molar ratio of ester monomers to PEG, and exhibited monomodal GPC curves. The crystallinity of the PEG‐b‐polyester star block copolymers was determined by differential scanning calorimetry and X‐ray diffraction. Copolymers with a higher arm number had a higher tendency toward crystallization. The crystallinity of the PEG‐b‐polyester star block copolymers also depended on the nature of the polyester block. The CMCs of the PEG‐b‐PCL star block copolymers, determined from fluorescence measurements, increased with increasing arm number. The CMCs of the four‐arm star block copolymers with different polyester segments increased in the order 4a‐PEG‐b‐PCL < 4a‐PEG‐b‐PDO < 4a‐PEG‐b‐PLGA < 4a‐PEG‐b‐PTMC, suggesting a relationship between CMC and star block copolymer crystallinity. The partition equilibrium constant, K_v, which is an indicator of the hydrophobicity of the micelles of the PEG‐polyester star block copolymers in aqueous media, increased with decreasing arm number and increasing crystallinity. A key aspect of the present work is that we successfully prepared PEG‐b‐polyester star block copolymers by a metal‐free method. Thus, unlike copolymers synthesized by ROP using a metal as the monomer activator, our copolymers do not contain traces of metals and hence are more suitable for biomedical applications. Moreover, we confirmed that the PEG‐b‐polyester star block copolymers form micelles and hence may be potential hydrophobic drug delivery vehicles. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2084–2096, 2008     

Investigation into the ROMP copolymerization of peptide‐ and PEG‐functionalized norbornene derivatives

The ring‐opening metathesis polymerizations (ROMP), using RuCl₂ (PCy₃)₂CHPh, of a series of peptide‐functionalized norbornene derivatives have been investigated. Incorporation of a PEG‐monomer was found to prevent premature precipitation of polymer strands during the course of polymerization reactions and yield water compatible polymers in high conversions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3178–3190, 2007     

Monomer sequencing and microstructural analysis on polymers of dimethyl norbornene dicarboxylate and 7‐oxanorbornene dicarboxylic derivatives employing ruthenium catalysts by ring‐opening metathesis polymerization

The physiochemical properties, comonomer sequencing, and regiospecificity of the linkages between monomeric units within homo/copolymers based on 5,6‐di‐substituted norbornene and 7‐oxanorbornene type monomers by ring‐opening metathesis polymerization are reported and correlated to their primary and secondary structural elements. In general, first‐generation Grubbs‐ I1 ruthenium catalyst generates polymers with high trans content that exhibits an extended secondary structure with exo,exo substituents, whereas second‐generation Grubbs‐ I2 catalyst produces polymers with high cis content that forms tight turns, resulting in a compact structure. Furthermore, I2 ‐produced polymers exhibit a high level of alternating cis–trans double bonds along their polymeric backbone. In stark contrast, both first‐ and second‐generation Grubbs catalysts display complete reversal in cis/trans selectivity when an oxygen atom is in position‐7 of the norbornene‐ring along with mono‐endo‐substitution in position‐5 or 6, and hence highlighting the importance of stereoelectronic complexation by the catalyst with the next incoming monomer for cis/trans selectivity. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2477–2501