葫［7］环联脲作为毛细管电泳分离介质的研究

以葫［7］环联脲(CB［7］)作为毛细管电泳添加剂,成功地分离了6种硝基苯类化合物。考察了pH值对电渗流的影响,初步评价了其基本的电泳性能,结果表明在所考察的pH值范围内(pH 2~6.5),葫［7］环联脲是质子化的,且吸附到毛细管内壁上,这使得毛细管内壁带上正电荷,电渗流反向;初步考察了葫［7］环联脲的浓度对分离的影响,证明了用葫［7］环联脲作为添加剂可完全分离对硝基乙苯、对硝基甲苯、对氯硝基苯、间二硝基苯、2,4-二硝基氯苯和硝基苯这6种物质,最佳的缓冲液为10 mmol/L Na2HPO4（用盐     

葫[n]环联脲(n=5,6,7,8)与两种重氮氟硼酸盐的包合作用研究

用核磁共振氢谱和紫外-可见光谱滴定法考察了葫[n]环联脲(Cucurbit[n]uril,n=5,6,7,8)与对甲苯重氮氟硼酸盐和4,4′-联苯二重氮氟硼酸盐的配位情况,并用曲线拟合求得形成的包结配合物的稳定常数.结果表明,不同空腔的葫[n]环联脲对不同尺寸的重氮氟硼酸盐具有很显著的选择性包结作用.在相同条件下,与葫[6]环联脲相比,葫[7]环联脲更易于容纳苯环.同时,随着酸性的增强,葫[n]环联脲上的脲羰基质子化程度加大,使得其配位能力有所减弱.     

The cucurbit[n]uril family: prime components for self-sorting systems

We determined the values of Ka for a wide range of host-guest complexes of cucurbit[n]uril (CB[n]), where n = 6-8, using 1H NMR competition experiments referenced to absolute binding constants measured by UV/vis titration. We find that the larger homologues--CB[7] and CB[8]--individually maintain the size, shape, and functional group selectivity that typifies the recognition behavior of CB[6]. The cavity of CB[7] is found to effectively host trimethylsilyl groups. Remarkably, the values of Ka for the interaction of CB[7] with adamantane derivatives 22-24 exceeds 10(12) M(-1)! The high levels of selectivity observed for each CB[n] individually is also observed for the CB[n] family collectively. That is, the selectivities of CB[6], CB[7], and CB[8] toward a common guest can be remarkably large. For example, guests 1, 3, and 11 prefer CB[8] relative to CB[7] by factors greater than 10(7), 10(6), and 3000, respectively. Conversely, guests 23 and 24 prefer CB[7] relative to CB[8] by factors greater than 5100 and 990, respectively. The high levels of selectivity observed individually and collectively for the CB[n] family renders them prime components for the preparation of functional biomimetic self-sorting systems.     

Inclusion complexation of diquat and paraquat by the hosts cucurbit[7]uril and cucurbit[8]uril

The binding interactions in aqueous solution between the dicationic guest diquat (DQ(2+)) and the cucurbit[7]uril (CB7) and cucurbit[8]uril (CB8) hosts were investigated by (1)H NMR, UV/Vis, and fluorescence spectroscopy; mass spectrometry; single-crystal X-ray diffraction; and electrochemical techniques. The binding data were compared with previously reported results for the related paraquat guest (PQ(2+)). DQ(2+) was found to bind poorly (K=350 m(-1)) inside CB7 and more effectively (K=4.8 x 10(4) m(-1)) inside CB8. One-electron reduction led to increased binding affinity with both hosts (K(r)=1 x 10(4) m(-1) with CB7 and K(r)=6 x 10(5) m(-1) for CB8). While (1)H NMR spectroscopic data revealed that DQ(2+) is not fully included by CB7, the crystal structure of the CB8DQ(2+) complex-obtained from single-crystal X-ray diffraction-clearly establishes its inclusion nature. Overall, both diquat and its one-electron reduced radical cation are bound more effectively by CB8 than by CB7. In contrast to this, paraquat exhibits selectivity for CB7, but its radical cation forms a highly stable dimer inside CB8. These differences highlight the pronounced sensitivity of cucurbit[n]uril hosts to guest features such as charge, charge distribution and shape.     

核磁共振方法研究瓜环[n](n=7,8)与枸橼酸西地那非的相互作用

利用1H NMR技术、电喷雾质谱、红外光谱以及紫外吸收光谱法等手段研究了瓜环[n](n=7,8)与枸橼酸西地那非的相互作用。结果表明:枸橼酸西地那非与两种瓜环都形成了1∶1的包结配合物,但是其配合物的作用模式随瓜环的大小而不同。通过计算得出瓜环[n](n=7,8)与枸橼酸西地那非的包结常数分别为958和1530 L/mol,说明瓜环对枸橼酸西地那非具有潜在的缓释作用。     

Cucurbit[n]uril analogues: synthetic and mechanistic studies

[reaction: see text] The synthesis of cucurbit[n]uril analogues (18, 19, (+/-)-20, 33, 34, 35, 36, and 37) is presented. These CB[5], CB[6], and CB[7] analogues all contain bis(phthalhydrazide) walls that are incorporated into the macrocycle. The tailor-made synthesis of these CB[n] analogues proceeds by the condensation of the appropriate bis(electrophile) (4, 7, or 9) with bis(phthalhydrazide) (17), which delivers the CB[6] and CB[7] analogues in good yield, whereas the CB[5] analogue is formed in low yield. To improve the solubility characteristics of the CB[n] analogues for recognition studies in water or organic solution, the CO2Et groups were transformed to CO2H and CO2(CH2)9CH3 groups. On the basis of the results of product resubmission experiments, we conclude that these macrocycles are kinetic products. To help rationalize the good yields obtained in the CB[6] and CB[7] analogue macrocyclization reactions, we performed mechanistic studies of model methylene bridged glycoluril dimers, which suggest an intramolecular isomerization during CB[n] analogue formation.     

Synthesis and reactivity of fluorinated ferracarborane anions

The ferracarborane [N(PPh3)2][6,6,6,10,10,10-(CO)6-closo-6,10,1-Fe2CB7H8] reacts in CH2Cl2 with 3 molar equivalents of Ag[PF6] to yield the trifluoro-substituted species [N(PPh3)2][7,8,9-F3-6,6,6,10,10,10-(CO)6-closo-6,10,1-Fe2CB7H5]. Compound undergoes structural rearrangement in toluene at reflux temperatures, forming [N(PPh3)2][8,9,10-F3-6,6,6,7,7,7-(CO)6-closo-6,7,1-Fe2CB7H5]. Alternatively, reaction of either or with a 10-fold excess of Ag[PF6] in CH2Cl2 forms two species: namely, [N(PPh3)2][2,7,9,10-F4-6,6,6,8,8,8-(CO)6-closo-6,8,1-Fe2CB7H4], in which one further B-F substitution has occurred and the {Fe2CB7} cluster core has rearranged, plus a mono-iron co-product, [N(PPh3)2][3,8,9-F3-7,7,7-(CO)3-closo-7,1-FeCB7H5] that is formed by polyhedral contraction. Treatment of with [NO][BF4] in CH2Cl2 results in CO substitution at the 4-connected iron vertex [Fe10], producing the zwitterionic complex [7,8,9-F3-6,6,6,10,10-(CO)5-10-NO-closo-6,10,1-Fe2CB7H5]. Addition of Me3NO to a mixture of and PEt3 in CH2Cl2 also results in CO substitution, forming the isomeric species [N(PPh3)2][7,8,9-F3-6,6,m,10,10-(CO)5-n-PEt3-closo-6,10,1-Fe2CB7H5] [m=6, n=10; m=10, n=6] in a 5:1 ratio. Treatment of with [NO][BF4] and then CNBut in CH2Cl2 allows further, successive CO substitution at Fe10 to yield first a neutral, zwitterionic complex [7,8,9-F3-6,6,6,10-(CO)4-10-NO-10-PEt3-closo-6,10,1-Fe2CB7H5] and then [7,8,9-F3-6,6,6-(CO)3-10-CNBut-10-NO-10-PEt3-closo-6,10,1-Fe2CB7H5]. The molecular structures of compounds and have been established by X-ray diffraction.     

Mechanism of the conversion of inverted CB[6] to CB[6

Inverted cucurbit[n]urils (iCB[n]) form as intermediates during the synthesis of cucurbit[n]urils from glycoluril and formaldehyde in HCl (85 degrees C). Product resubmission experiments establish that the diastereomeric iCB[6] and iCB[7] are kinetic products that are less stable thermodynamically than CB[6] or CB[7] (>2.8 kcal mol(-1)). When iCB[6] or iCB[7] is heated under aqueous acidic conditions, a preference for ring contraction is noted in the formation of CB[5] and CB[6], respectively. Interestingly, under anhydrous acidic conditions ring size is preserved with iCB[6] delivering CB[6] cleanly. To establish the intramolecular nature of the iCB[6] to CB[6] conversion under anhydrous, but not aqueous, acidic conditions we performed crossover experiments involving mixtures of iCB[6] and its (13)C=O labeled isotopomer (13)C(12)-iCB[6]. An unusual diastereomeric CB[6] with a M?bius geometry (13) is proposed as a mechanistic intermediate in the conversion of iCB[6] to CB[6] under anhydrous acidic conditions. The improved mechanistic understanding provided by this study suggests improved routes to CB[n]-type compounds.     

Water structuring inside the cavities of cucurbit[n]urils (n = 5–8): a quantum-chemical forecast

In this work we report findings of the quantum-chemical examination of water structuring in the cavities of cucurbit[n]urils (CB[n]), n?=?5–8 obtained within the density functional theory. The thermodynamically most stable structures of inclusion compounds (H₂O)_m@CB[n] were determined for different numbers m of H₂O molecules inside the cavities. From the viewpoint of thermodynamics, the most probable numbers m of water molecules in the CB[n] homologues are the following: m?=?2 for CB[5], m?=?4 for CB[6], m?=?8 for CB[7] and m?=?10 for CB[8]. For the case of CB[6] synthesized in aqueous solution, we compared its experimental IR spectrum with that calculated quantum-chemically for the model inclusion systems (H₂O)_m@CB[6] where m ranges from 1 to 6. The best agreement between the experimental and theoretical spectra was observed for (H₂O)₄@CB[6], in complete agreement with the conclusion made based on the thermodynamic estimations. Our results are also in good agreement with other available estimates of the most probable number of water molecules in CB[n].     

Separation of positional isomers by cucurbit[7]uril-mediated capillary electrophoresis

A novel macrocyclic molecule, cucurbit[7]uril (CB[7]) was for the first time employed as an additive in capillary electrophoresis (CE). In similarity to other macrocyclic molecules, such as crown ethers, cyclodextrins (CDs) and calixarenes, CB[7] can form inclusion complexes with a variety of guest molecules due to its inner cavity. Thus, it can be used like other macrocyclic molecules to manipulate selectivities in CE. During the running process, CB[7] bears a positive charge under the studied pH range (pH 2.5-7) and can be adsorbed onto the inner wall of a fused-silica capillary, leading to a reversal of the electroosmotic flow (EOF). Electrophoretic behaviors of nitrotoluene, nitrophenol, nitroaniline, and methylaniline isomers were studied under various conditions. The electrophoretic separations of the isomers can be accomplished with a buffer containing CB[7]. Furthermore, a probable separation mechanism in the presence of CB[7] was also proposed.     

Modulating the Nucleated Self‐Assembly of Tri‐β3‐Peptides Using Cucurbit[n]urils

The modulation of the hierarchical nucleated self‐assembly of tri‐β³‐peptides has been studied. β³‐Tyrosine provided a handle to control the assembly process through host‐guest interactions with CB[7] and CB[8]. By varying the cavity size from CB[7] to CB[8] distinct phases of assembling tri‐β³‐peptides were arrested. Given the limited size of the CB[7] cavity, only one aromatic β³‐tyrosine can be simultaneously hosted and, hence, CB[7] was primarily acting as an inhibitor of self‐assembly. In strong contrast, the larger CB[8] can form a ternary complex with two aromatic amino acids and hence CB[8] was acting primarily as cross‐linker of multiple fibers and promoting the formation of larger aggregates. General insights on modulating supramolecular assembly can lead to new ways to introduce functionality in supramolecular polymers.     

Cucurbit[n]uril formation proceeds by step-growth cyclo-oligomerization

In contrast to the high yield formation of cucurbit[n]uril (CB[n]) from a 1:2 ratio of glycoluril to formaldehyde, the condensation of glycoluril with less than 2 equiv of formaldehyde delivers a reaction mixture that contains glycoluril oligomers (2-6) and CB[n] compounds that lack one or more methylene bridges known as nor-seco-cucurbit[n]urils (ns-CB[n]). In this paper we report the chromatographic purification of C-shaped glycoluril oligomers (dimer-hexamer), their characterization in solution, and their X-ray crystal structures. Quite interestingly, despite being acyclic glycoluril pentamer 5 and hexamer 6 retain the ability to bind to guests typical of CB[6] but are also able to expand their cavity to accommodate larger guests like cationic adamantane derivatives. We performed product resubmission experiments with glycoluril oligomers 2-6 and found preferences for the formation of specific ring sizes during CB[n] formation. A comprehensive mechanistic scheme is proposed that accounts for the observed formation of 2-6 and ns-CB[n]. Overall, the experiments establish that a step-growth cyclo-oligomerization process operates during CB[n] formation.     

Facile synthesis of cucurbit[n]uril derivatives via direct functionalization: expanding utilization of cucurbit[n]uril

A long-standing problem in cucurbituril chemistry is answered through the first direct functionalization of cucurbit[n]uril (CB[n]; n = 5-8)) leading to perhydroxyCB[n] which can be further modified to provide tailored CB[n] derivatives with desired functional groups and good solubility. Anchoring a CB[6] derivative on the surface and its potential application as a sensor are demonstrated. A CB[6] derivative forms nanospheres with possible use in protein and peptide drug delivery.     

Probing guest compounds enabling the facile isolation of cucurbit[10]uril

A large set of commercially available amino compounds were assessed toward binding with cucurbit[10]uril(CB[10]),with the purpose of facilitating the isolation of pure CB[10].We found that the addition of a specific guest into a relevant mixture of CB[n]allowed the displacement of CB[5]from CB[10]?CB[5].Subsequent washing of the resulting(G=guest)with dimethyl sulfoxide(DMSO),enabled to get pure CB[10]in a facile and highly efficient way.     

H3BTC‐Induced Supramolecular Assembly Based on Cucurbit[6]uril: Possible Application for Sensing Small Molecules

The compound 2[Ca(H₂O)₃ (DMF@CB[6])] · 2(BTC) · 15H₂O ( CCUT ‐ 102 , CB[6] = cucurbit[6]uril; H₃BTC = 1,3,5‐benzenetricarboxylic acid) was synthesized using the approach of organic guest‐induced formation of polymers or frameworks based on the coordination of metal ions and cucurbit[n]urils. The compound was characterized by X‐ray diffraction analysis, PXRD, IR spectroscopy, thermogravimetric and elemental analyses. According to the X‐ray diffraction data, the calcium atom is coordinated by the oxygen atoms of the CB[6] molecule, water molecules, and N ,N‐dimethylformamide (DMF). The internal cavity of CB[6] is occupied by DMF. Each H₃BTC molecule interacts the CB[6] molecules through π?π interactions between aromatic rings of H₃BTC and the rings of CB[6]. The luminescence behaviors and sensing properties of CCUT ‐ 102 in different solvents were also studied.     

The inverted cucurbit[n]uril family

We report the isolation, characterization, and recognition behavior of iCB[6] and iCB[7], which are diastereomers of CB[6] and CB[7], respectively, containing a single inverted glycoluril unit. Product resubmission experiments establish that these inverted CB[n] are intermediates in the mechanism of CB[n] formation. As a consequence of the inverted glycoluril ring, these inverted cucurbiturils possess a permanent dipole moment, are slightly smaller than their diastereomers, show distinctive selectivity in their recognition behavior, and report directly on the contents of their hydrophobic cavity.     

荧光光谱法研究葫芦[7]脲与6-巯嘌呤和腺嘌呤的包结作用

采用荧光光谱法分别研究了葫芦[7]脲(CB[7])对6-巯嘌呤(6-MP)和腺嘌呤(ADP)的包结作用。实验考察了时间、pH值以及温度对荧光强度和包结作用的影响,利用Benesi-Hildebrand方程分别计算出6-MP和ADP与CB[7]的包结常数。结果表明:酸度对体系的包结有明显的影响。在pH值为8.0和2.0左右时,6-MP和ADP分别具有稳定和最佳激发和发射波长,随着CB[7]浓度的增大,体系的荧光强度都有明显增强,包结作用迅速(小于5 min)。实验得出CB[7]与6-MP和ADP的包结比均为1∶1,在298 K时的包结常数分别为3.6797×102L·mol-1和2.2033×102L·mol-1。通过热力学参数的变化,探讨了维系包结物稳定性的主要作用力。CB[7]是葫芦脲家族中水溶性最强的主体分子,作为一种安全低毒的药物载体极具潜力。     

Binding selectivity of cucurbit[7]uril: bis(pyridinium)-1,4-xylylene versus 4,4'-bipyridinium guest sites

The binding interactions between the host cucurbit[7]uril (CB7) and a series of linear guests containing bis(pyridinium)-1,4-xylylene and/or 4,4'-bipyridinium residues were investigated by (1)H NMR spectroscopy. CB7 was found to exhibit considerable binding selectivity for bis(pyridinium)-1,4-xylylene over 4,4'-bipyridinium sites. New pseudo-rotaxane and rotaxane compounds were synthesized utilizing the host-guest interactions between CB7 and the surveyed guests. [structure: see text]     

Expected and unexpected photoreactions of 9-(10-)substituted anthracene derivatives in cucurbit[n]uril hosts

By arranging substrates in a “reaction ready” state through noncovalent interactions, supramolecular nanoreactors/catalysts show high selectivity and/or rate acceleration features. Herein, we report the host–guest complexation of 9-(10-)substituted anthracene derivatives (G1–G3) with cucurbit[n]uril (CB[n], n = 8, 10), and the photoreactions of these derivatives in the presence of CB[n] hosts. Both CB[10] and CB[8] showed no obvious effects on the photoreaction of 9,10-disubstituted derivative G1. For G2 and G3, CB[10] operated as either a nanoreactor or catalyst (10%) for the photodimerization of two compounds with high selectivity and high yield. However, although CB[8] formed a 1 : 2 complex with G2, as also observed with CB[10], the photosolvolysis product (9-anthracenemethanol) was obtained quantitatively after photoirradiation of the CB[8]·2G2 complex. This unexpected photosolvolysis was rationalized by a plausible catalytic cycle in which anthracene acts as a photoremovable protecting group (PPG) and the carbonium ion intermediate is stabilized by CB[8].

The photodimerization of 9-substituted anthracene derivative was tremendously promoted by a catalytic amount of cucurbit[10]uril (CB[10]) in water. While CB[8] exclusively induced the photosolvolysis of the anthracene derivative.     

Cucurbit[n]uril analogues

[structure: see text] Cucurbits come in a variety of sizes, shapes, and colors. We present a building block approach that allows the tailor-made synthesis of CB[5], CB[6], and CB[7] analogues whose sizes, shapes, and colors differ from those of the known CB[n].