水合氯化镧与二乙氨基荒酸二乙铵配合行为的热化学

在干燥氮气气氛下，以无水乙醇为溶剂，制备了低水合氯化镧与二乙氨基荒酸 二乙铵（D-DDC）的配合物，确定其组成为Et_2NH_2[La(S_2CNEt_2)_4]。用微量热 法测定了298.15 K下水合氯化镧和D-DDC在无水乙醇中的溶解焓和不同温度下二乙 氨基荒酸镧液相生成反应的焓变。在实验和计算基础上，得到了液相生成反应的热 力学参数（活化焓、活化熵和活化自由能）、速率常数和动力学参数（表现活化能 、频率因子和反应基数），通过合理的热化学循环，求得了标题固相反应的焓变。     

Thermochemical Study of Coordination of Holmium Chloride Hydrate with Diethylammonium Diethyldithiocarbamate

The complex of holmium chloride hydrate with diethylammonium diethyldithiocarbamate (D-DDC) was synthesized via mixing their solutions in absolute alcohol under a dry N2 atmosphere. The elemental and chemical analyses show that the complex has the general formula Et2NH2[Ho(S2CNEt2)4]. It was also characterized by IR spectroscopy. The enthalpies of the dissolution of holmium chloride hydrate and D-DDC in absolute alcohol at 298.15 K o and the enthalpy changes of liquid-phase reactions of the formation of Et2NH2[Ho(S2CNEt2)4] at different temperatures were determined by microcalorimetry. On the basis of experimental and calculated results, three thermodynamic parameters (the activation enthalpy, the activation entropy and the activation free energy), the rate constant and three kinetic parameters (the apparent activation energy, the pre-exponential constant and the reaction order) of the liquid-phase reaction of the complex formation were obtained, The enthalpy change of the solid-phase complex formation reaction at 298.15 K was calculated by means of a thermochemical cycle.     

Thermochemistry on Coordination Behavior of Praseodymium Chloride Hydrate with Diethylammonium Diethyldithiocarbamate

The complex of praseodymium chloride lower hydrate with diethylammonium diethyldithiocarbamate (D-DDC) has been synthesized conveniently in absolute alcohol and dry N2 atmosphere. The title complex was identified as Et2NH2[Pr(S2CNEt2)4] by chemical and elemental analyses, the bonding characteristics of which were characterized by IR spectrum.The enthalpy of solution for praseodymium chloride hydrate and D-DDC in absolute alcohol at 298.15 K, and the enthalpy changes of liquid-phase reaction of formation for Et2NH2 [ Pr(S2CNEt2)4] at different temperatures were determined by miccocalorimetry. On the basis of experimental and calculated resuits, three thermodynamic parameters (the activation enthalpy, the activation entropy and the activation free energy),the rate constant and three kinetic parameters (the apparent activation energy, the pre-exponential constant and the reaction order) of liquid phase reaction of formation were obtained. The enthalpy change of the solid-phase title reaction at 298.15 K was calculated by a thermochemical cycle.     

Et2NH2[Nd(S2CNEt2)4]的晶体结构和生成反应焓变

在干燥氮气气氛下,以无水乙醇为溶剂,制备了低水合氯化钕与二乙氨基荒酸二乙铵(D-DDC)配合物,确定其组成为Et2NH2[Nd(S2CNEt2)4].单晶结构分析表明,配合物中4个二乙氨基荒酸根各通过2个硫原子与钕离子成键形成八配位十二面体阴离子,并与二乙铵阳离子形成缔合型分子.晶体属单斜晶系,空间群P21/n,a=1.37517(14)nm,b=2.1146(2)nm,c=1.44641(15)nm,β=102.028(2)°,Z=4.用微量热法测定了298.15K下水合氯化钕和D-DDC在无水乙醇中的溶解焓及二乙氨基荒酸钕液相生成反应焓变分别为(-17.89±0.096),(50.280±0.151)和(-10.116±0.065)kJ/mol,求得固相生成反应焓变.     

三元配合物RE(Et2dtc)3(phen)热化学性质的规律性

在无水乙醇中, 用铜试剂(NaEt₂dtc•3H₂O)和邻菲咯啉(o-phen•H₂O)分别与13种低水合氯化稀土合成了三元固态配合物(其中5种尚未见文献报道), 确定它们的组成可用通式RE(Et₂dtc)₃(phen)表示. IR光谱表明配合物中RE³⁺与3个NaEt₂dtc中的6个硫原子双齿配位, 同时与o-phen中的2个氮原子双齿配位. 用RD496-Ⅲ微量热计测定了298.15 K下13种水合氯化稀土盐及两个配体在无水乙醇中的溶解焓, 两个配体醇溶液的混合焓及13种化合物液相生成反应的焓变, 并通过合理的热化学循环, 求得了标题配合物的固相生成反应焓变; 测定了标题配合物298.15 K的比热容. 用RBC-II精密转动弹热量计测定了标题配合物的恒容燃烧热, 计算了它们的标准摩尔燃烧焓和标准摩尔生成焓. 发现系列配合物RE(Et₂dtc)₃(phen) (RE＝La, Pr, Nd, Sm～Lu)的多项热化学性质, 如低水合氯化稀土盐在无水乙醇中的溶解焓以及配合物的液相生成反应焓变和固相生成反应焓变、常温比热容、标准摩尔燃烧焓和标准摩尔生成焓都与稀土原子序数作图呈现“三分组现象”. 较集中地反映出配合物中RE³⁺与配体间的化学键有一定程度的共价性, 这是由于稀土离子5s²5p⁶轨道对4f电子的不完全屏蔽引起的.     

Synthesis and reactions of some heterobimetallic and multimetallic complexes containing η-arene-ruthenium(II), -osmium(II) and η-Pentamethylcyclopentadienyl-rhodium(III) moieties

Heterobimetallic complexes such as [η-areneMCl(SPPh₂)₂Pt(S₂CNEt₂)] (I, M = Ru, Os) and [η-C₅Me₅RhCl(SPPh₂)₂Pt(S₂CNEt₂)] (II) have been synthesised by reaction of NEt₂H₂[Pt(S₂CNEt₂)(Ph₂PS)₂] with either [M(η-arene)Cl₂]₂ or [Rh(η-C₅Me₅)Cl₂]₂ (2/1) molar ratio). Further reactions of I include facile chloride displacement with a range of neutral ligands L to give [η-areneML(SPPh₂)₂Pt(S₂CNEt₂)⁺ (III) cations and formation of tri- and penta-metallic species on treatment with more [Pt(S₂CNEt₂)(Ph₂PS)₂]^?.     

Mechanochemical Synthesis of Tri-μ2-Disulfido-μ3-Thio-Tris(Diethyldithiocarbamato)-S,S"-triangular- Trimolybdenum Diethyldithiocarbamate {Mo3(μ3-S)(μ2-S2)3[(C2H5)2NCS2]3}+[(C2H5)2NCS2]–

The mechanoactivated solid-state reaction of [Et₄N]₂[Mo₃S₇Br₆] with Na(Et₂NCS₂) in a vacuum vibration ball mill yields the [Mo₃S₇(Et₂NCS₂)₃]⁺[Et₂NCS₂]^–complex. The product was studied by IR and Raman spectroscopy and differential thermal analysis.     

Standard enthalpy of formation of (ClOF2)2[NiF6](cryst.)

The enthalpies of reaction between crystalline (ClOF₂)₂[NiF₆] and water and an aqueous solution of alkali are measured at 298.15 K using a highly sensitive isothermal shell calorimeter. On the basis of these values and the published data, the standard enthalpy of formation of the studied compound is found by two independent methods; its value is Δ _f H^o(ClOF₂)₂[NiF₆]](cryst.) = −1158 ± 11 kJ/mol.     

Thermokinetics on the reaction of formation of Dy[(C5H8NS2)3(C12H8N2)]

The enthalpy change of formation of the reaction of hydrous dysprosium chloride with ammonium pyrrolidinedithiocarbamate (APDC) and 1,10-phenanthroline (o-phen•H₂O) in absolute ethanol at 298.15 K has been determined as (-16.12 ± 0.05) kJ•mol^-1 by a microcalormeter. Thermodynamic parameters (the activation enthalpy, the activation entropy and the activation free energy), rate constant and kinetics parameters (the apparent activation energy, the pre-exponential constant and the reaction order) of the reaction have also been calculated. The enthalpy change of the solid-phase reaction at 298.15 K has been obtained as (53.59 ± 0.29) kJ•mol^t-1 by a thermochemistry cycle. The values of the enthalpy change of formation both in liquid-phase and solid-phase reaction indicated that the complex could only be synthesized in liquid-phase reaction.

     

Thermokinetics on the reaction of formation of Dy[(C<Subscript>5</Subscript>H<Subscript>8</Subscript>NS<Subscript>2</Subscript>)<Subscript>3</Subscript>(C<Subscript>12</Subscript>H<Subscript>8</Subscript>N<Subscript>2</Subscript>)]

The enthalpy change of formation of the reaction of hydrous dysprosium chloride with ammonium pyrrolidinedithiocarbamate (APDC) and 1,10-phenanthroline (o-phen?H₂O) in absolute ethanol at 298.15 K has been determined as (-16.12 ± 0.05) kJ?mol^-1 by a microcalormeter. Thermodynamic parameters (the activation enthalpy, the activation entropy and the activation free energy), rate constant and kinetics parameters (the apparent activation energy, the pre-exponential constant and the reaction order) of the reaction have also been calculated. The enthalpy change of the solid-phase reaction at 298.15 K has been obtained as (53.59 ± 0.29) kJ?mol^t-1 by a thermochemistry cycle. The values of the enthalpy change of formation both in liquid-phase and solid-phase reaction indicated that the complex could only be synthesized in liquid-phase reaction.     

Thermal studies on the anation and decomposition of trans-fluoroaquobis(ethylenediamine) and trans-fluoroaquoabis(propylenediamine) dithionate

The anation and decomposition reaction of trans[CrF(H₂O)(aa′)₂]S₂O₆ [aa′ = ethylenediamine (en); 1,3-diaminepropane (tmd)] have been studied by means of ATD, TG and DSC techniques. The first and only perfectly defined step is the anation reaction forming the species cis[CrF(S₂O₆)(aa′)₂]. By means of DSC techniques, the enthalpies of reaction and the activation energies of both reactions have been estimated. The electronic spectra of the resultant products suggest cis configuration. A second step, preceding total decomposition of the complex, involves cis[CrF(S₂O₆)(aa′)₂] → cis[CrF(SO₄)(aa′)₂] + SO₂ which is contaminated by decomposition reactions.     

Phase Chemistry and Thermochemstry on Coordination Behavior of Zinc Chloride with Leucine

The solubility property of the ZnCl2-Leu-H2O(Leu=L-a-leucine) system at 298.15K in the whole concentration range was investigatey by the semimicro-phase equilibrium method.The corresponding solubility diagram and refractive index diagram were constructed.The results indicated that there was one complex formed in this system.namely,Zn(Leu)Cl2.The complex is congruently soluble in water.Based on Phase equilibrium data,the complex was prepared.Its composition and properties were characterized by chemical analysis,elemental analysis,IR spectra,and TG-DTG.The thermochemical properties of coordination reaction of zinc chloride with L-a-leucine were investigated by a microcalorimeter.The enthalpies of solution of L-a-leucine in water and its zinc complex at infinite dilution and the enthalpy change of solid-liquid reaction wrer determined at 298.15K.The enthalpy change of soild phase reaction and the standard enthalpy of formation of zinc complex were claculated.On the basis of experimental and calculated results,three thermodynamic parameters(the activation enthalpy,the activation entropy and the activation free energy),the rate constant and three kinetic parameters(the activation energy,the preexponential constant and the reaction order) of the reaction,and the standard enthalpy of formation of Zn(Leu)^2 (aq) were obtained.The results showed that the title reaction took place easily at studied temperature.     

Bimetallic complexes with porphyrins containing a cyclometalated phenylpyridine group

Treatment of Ni(HP¹) (H₃P¹ = meso-5-[4′-(2″-pyridyl)phenyl]-10,15,20-triphenyporphyrin) with K₂[PdCl₄] in EtOH afforded [Pd{Ni(P¹)}]₂(μ-Cl)₂ that reacted with NaS₂CNEt₂ to give Pd(S₂CNEt₂)[Ni(P¹)]. Reaction of Ni(HP¹) with [Ir(H)₂(PPh₃)₂(Me₂CO)₂][BF₄] afforded Ir(H)Cl(PPh₃)₂[Ni(P¹)]. The crystal structures of Pd(S₂CNEt₂)[Ni(P¹)] and Ir(H)(Cl)(PPh₃)₂[Ni(P¹)] have been determined.     

Standard enthalpy of formation of (NO2)2[NiF6](cr)

The enthalpies of interactions of (NO₂)₂[NiF₆](cr) with water and aqueous KOH, enthalpies of solution of KF(cr) in dilute aqueous solutions of KNO₃ and KOH, and enthalpy of mixing of solutions of NiF₂, HNO₃, and HF were measured at 298.15 K using isothermic-shell calorimeters. Based on the obtained data and values in the literature, the standard enthalpy of formation of the compound under study was determined by two independent methods: Δ_f H°(NO₂)₂[NiF₆](cr) = −1099 ± 9 kJ/mol.     

Triangular Clusters of Molybdenum Coordinated with Tetrabromocatecholate

New triangular cluster (Ph₄P)₂[Mo₃S₇(TBC)₃] (2) (TBC—tetrabromocatecholate) was synthesized by the straightforward reaction of ( ⁿ Bu₄N)₂[Mo₃S₇Br₆] (1) with tetrabromocatechol in the presence of Et₃N, followed by the addition of Ph₄PBr. Interaction of 2 with PPh₃ leads to the conversion of the bridging disulphide ligands to the bridging sulphides, and (Ph₄P)₂[Mo₃S₄(TBC)₃(thf)₂]·0.5Et₂O (3·0.5Et₂O) was crystallized out of a THF/Et₂O mixture. The main structural feature of 3 is unsymmetrical environment of the Mo₃ core derived from the coordination of only two THF molecules per three metals.     

Chalkogenohalogenogallate(III) und -indate(III): Eine neue Verbindungsklasse in der dritten Hauptgruppe. Synthese und Struktur von [Ph4P]2[In2SX6], [Et4N]3[In3E3Cl6] · MeCN und [Et4N]3[Ga3S3Cl6] · THF (X = Cl,Br; E = S,Se)

Chalcogenohalogenogallates(III) and -indates(III): A New Class of Compounds for Elements of the Third Main Group. Preparation and Structure of [Ph₄P]₂[In₂SX₆], [Et₄N]₃[In₃E₃Cl₆] · MeCN and [Et₄N]₃[Ga₃S₃Cl₆] · THF (X = Cl, Br; E = S, Se) [In₂SCl₆]^2?, [In₂SBr₆]^2?, [In₃S₃Cl₆]^3?, [In₃Se₃Cl₆]^3?, and [Ga₃S₃Cl₆]^3? were synthesised as the first known chalcogenohalogeno anions of main group 3 elements. [Ph₄P]₂[In₂SCl₆] ( 1 ) (P1 ; a = 10.876(4) Å, b = 12.711(6) Å, c = 19.634(7) Å, α = 107.21(3)°, β = 96.80(3)°, γ = 109.78(3)°; Z = 2) and [Ph₄P]₂[In₂SBr₆] ( 2 ) (C2/c; a = 48.290(9) Å, b = 11.974(4) Å, c = 17.188(5) Å, β = 93.57(3)°, Z = 8) were prepared by reaction of InX₃, (CH₃)₃SiSSi(CH₃)₃ and Ph₄PX (X = Cl, Br) in acetonitrile. The reaction of MCl₃ (M = Ga, In) with Et₄NSH/Et₄NSeH in acetonitrile gave [Et₄N]₃[In₃S₃Cl₆] · MeCN ( 3 ) (P2₁/c; a = 17.328(4) Å, b = 12.694(3) Å, c = 21.409(4) Å, β = 112.18(1)°, Z = 4), [Et₄N]₃[In₃Se₃Cl₆] · MeCN ( 4 ) (P2₁/c; a = 17.460(4) Å, b = 12.816(2) Å, c = 21.513(4) Å, β = 112.16(2)°, Z = 4), and [Et₄N]₃[Ga₃S₃Cl₆] · THF ( 5 ) (P2₁/n; a = 11.967(3) Å, b = 23.404(9) Å, c = 16.260(3) Å, β = 90.75(2)°, Z = 4). The [In₂SX₆]^2? anions (X = Cl, Br) in 1 and 2 consist of two InSX₃ tetrahedra sharing a common sulfur atom. The frameworks of 3, 4 and 5 each contain a six-membered ring of alternating metal and chalcogen atoms. Two terminal chlorine atoms complete a distorted tetrahedral coordination sphere around each metal atom.     

Zweikern-Komplexe des Wolframs und Molybdäns mit zentraler {XMS2 MX}2+-Einheit (X=O,S) und S 2 2− -bzw. S 4 2− -Liganden

The synthesis and crystal structures of the compounds [PPh ₄]₂[W₂S₁₂]·0.5DMF, [PPh ₄]₂[W₂O₂S₁₀]·0.5DMF, [PPh ₄]₂[W₂S₁₀]··0.5DMF, [PPh ₄][NEt ₄][Mo₂OS₇]·CH₃CN, and [PPh ₄]₂[Mo₂O₂S₁₀] are reported.

     

Reactivity of Ammonium Halides: Action of Ammonium Chloride and Bromide on Iron and Iron(III) Chloride and Bromide

Ammonium chloride and bromide, (NH₄)Cl and (NH₄)Br, act on elemental iron producing divalent iron in [Fe(NH₃)₂]Cl₂ and [Fe(NH₃)₂]Br₂, respectively, as single crystals at temperatures around 450 °C. Iron(III) chloride and bromide, FeCl₃ and FeBr₃, react with (NH₄)Cl and (NH₄)Br producing the erythrosiderites (NH₄)₂[Fe(NH₃)Cl₅] and (NH₄)₂[Fe(NH₃)Br₅], respectively, at fairly low temperatures (350 °C). At higher temperatures, 400 °C, iron(III) in (NH₄)₂[Fe(NH₃)Cl₅] is reduced to iron(II) forming (NH₄)FeCl₃ and, further, [Fe(NH₃)₂]Cl₂ in an ammonia atmosphere. The reaction (NH₄)Br + Fe (4:1) leads at 500 °C to the unexpected hitherto unknown [Fe(NH₃)₆]₃[Fe₈Br₁₄], a mixed‐valent Fe^II/Fe^I compound. Thermal analysis under ammonia and the conditions of DTA/TG and powder X‐ray diffractometry shows that, for example, FeCl₂ reacts with ammonia yielding in a strongly exothermic reaction [Fe(NH₃)₆]Cl₂ that at higher temperatures produces [Fe(NH₃)]Cl₂, FeCl₂ and, finally, Fe₃N.     

Chemoselective reduction of azides catalyzed by molybdenum xanthate by using phenylsilane as the hydride source

A chemoselective, neutral, and efficient strategy for the reduction of azides to corresponding amines catalyzed by dioxobis(N,N,-diethyldithiocarbamato) molybdenum complex (1, MoO₂[S₂CNEt₂]₂) in the presence of phenylsilane is discovered. This chemoselective reduction strategy tolerates a variety of reducible functional groups.     

Isomorphism of bis(diethyldithiocarbamato)zinc(II) adduct with pyridine, [Zn(Py)(EDtc)2]: hysteresis in the reaction of the adduct formation

The structure of the polycrystalline adduct bis(diethyldithiocarbamato)-pyridine zinc(II) depends on the pathway of physico-chemical conditions during the preparation procedure, as was revealed by solid state ¹⁵N CP/MAS spectroscopy in good correlation with known single crystal X-ray diffraction structures of this adduct. Two isomorphs of the adduct, namely α-[Zn(Py)(S₂CNEt₂)₂] and β-[Zn(Py)(S₂CNEt₂)₂], are the two molecules in the asymmetric unit of a single crystal (or polycrystalline) sample that can be obtained by recrystallization from toluene of the equimolar solution of the initial diethyldithiocarbamate zinc(II) complex and pyridine. The third isomorph, γ-[Zn(Py)(S₂CNEt₂)₂], can be obtained by recrystallization from pure pyridine of the diethyldithiocarbamate zinc(II) complex, or by its equimolar absorption of pyridine, or by desorption of pyridine from the clathrated adduct, [Zn(Py)(S₂CNEt₂)₂]·Py. Finally, the γ-[Zn(Py)(S₂CNEt₂)₂] isomorph recrystallizes from the melt into α/β-isomorphs of the adduct.