The toxicity of hydroxylated and carboxylated multi-walled carbon nanotubes to human endothelial cells was not exacerbated by ER stress inducer

The toxicity of hydroxylated or carboxylated MWCNTs to human endothelial cells was modest, and the toxicity was not exacerbated by ER stress inducer.     

Matrix-dependent adhesion of vascular and valvular endothelial cells in microfluidic channels

The interactions between endothelial cells and the underlying extracellular matrix regulate adhesion and cellular responses to microenvironmental stimuli, including flow-induced shear stress. In this study, we investigated the adhesion properties of primary porcine aortic endothelial cells (PAECs) and valve endothelial cells (PAVECs) in a microfluidic network. Taking advantage of the parallel arrangement of the microchannels, we compared adhesion of PAECs and PAVECs to fibronectin and type I collagen, two prominent extracellular matrix proteins, over a broad range of concentrations. Cell spreading was measured morphologically, based on cytoplasmic staining with a vital dye, while adhesion strength was characterized by the number of cells attached after application of shear stresses of 11, 110, and 220 dyn cm(-2). Results showed that PAVECs were more well spread on fibronectin than on type I collagen (P < 0.0001), particularly for coating concentrations of 100, 200, and 500 microg mL(-1). PAVECs also withstood shear significantly better on fibronectin than on collagen for 500 microg mL(-1). PAECs were more well spread on collagen compared to PAVECs (P < 0.0001), but did not have significantly better adhesion strength. These results demonstrate that cell adhesion is both cell-type and matrix dependent. Furthermore, they reveal important phenotypic differences between vascular and valvular endothelium, with implications for endothelial mechanobiology and the design of microdevices and engineered tissues.     

Monitoring the status of T-cell activation in a microfluidic system

Leukocyte adhesion to the endothelium through surface molecules such as E-selectin and intercellular adhesion molecule-1 (ICAM-1) is a critical cellular event reflecting the physiological status of both cell types. Here we present a microfluidic system that can not only easily monitor the interaction between leukocytes and endothelial cells under physiological conditions, but also screen drug candidates for potential modulation of this interaction. Shear stress, which is an important factor for the binding of activated T cells to tumor necrosis factor-alpha (TNF-α)-treated human umbilical vein endothelial cells (HUVECs), was easily controlled by adjusting the flow rate in the microfluidic system. Whole blood of patients with systemic lupus erythematosus (SLE) who have auto-reactive T cells were infused into the activated HUVECs which subsequently showed a higher level of binding compared to a control blood sample from a person without SLE. When these autoreactive T cells were treated with immunosuppressors tacrolimus and cyclosporin A, the binding of the T cells to HUVECs was dramatically decreased. Therefore, this microfluidic system is capable of differentiating the physiological status of T cells or endothelial cells representing different disease conditions, as well as being useful for the identification of novel reagents that modulate the functions of leukocytes or endothelial cells.     

Different complex surfaces of polyethyleneglycol (PEG) and REDV ligand to enhance the endothelial cells selectivity over smooth muscle cells

Arg-Glu-Asp-Val (REDV) peptide with endothelial cells (ECs) selectivity was immobilized onto PEG based polymeric coating via the active p-nitrophenyloxycarbonyl group. The adhesion and proliferation of human umbilical vein endothelial cells (HUVECs) and human aortic smooth muscle cells (HASMCs) onto surface modified either by REDV end-tethered polyethylene glycol (PEG) or by the complex of free PEG and REDV were investigated to understand the synergic action of nonspecific resistance of PEG and specific recognitions of REDV. Cell culture results indicated that the surfaces end tethered by REDV peptide via PEG "spacer" (n=1, 6, 10) exhibited slight EC selectivity and showed small difference between different lengths of PEG chain. Both separate-culture and co-culture of HUVECs and HASMCs indicated that the introducing of free PEG into REDV tethered surface inhibited HASMCs adhesion significantly and remained a high level of HUVECs growth. Furthermore, the surface with short free PEG chain (n=6) was much more effective to enhance ECs selectivity than long EG chain (n=23). The combination of nonspecific resistance of short free PEG and the ECs selectivity of REDV peptide presents much better ability to enhance the competitive adhesion of HUVECs over HASMCs.     

人工细胞外基质对血管内皮细胞生存的影响

通过物理吸附方法, 利用胶原、 聚赖氨酸和融合蛋白VEGF-Fc对聚苯乙烯培养板表面进行改性, 以研究细胞外基质材料对血管内皮细胞的影响. 结果表明, 3种蛋白显著提高了聚苯乙烯表面的亲水性. 内皮细胞的黏附、 增殖、 细胞骨架蛋白染色和血管性血友病因子(vWF)免疫染色实验结果表明, 胶原、 聚赖氨酸和VEGF-Fc基质均能有效提高血管内皮细胞的黏附, 其中胶原可与VEGF协同作用促进内皮细胞分化表型的表达; VEGF-Fc基质兼具了VEGF的生物学活性, 可促进内皮细胞的黏附和增殖以及vWF功能性蛋白的表达. 本研究为诱导材料表面内皮化和血管新生的生物活性材料的设计开发提供了新思路.     

Expression of integrin β1 and its roles on adhesion between different cell cycle hepatocellular carcinoma cells (SMMC-7721) and human umbilical vein endothelial cells

To investigate expression of integrin β₁ and its roles on adhesion between different cell cycle hepatocellular carcinoma cell (HCC) and human umbilical vein endothelial cells (HUVEC), the synchronous G₁ and S phase HCC were achieved through thymine-2-deoxyriboside and colchicines sequential blockage method and double thymine-2-deoxyriboside blockage method, respectively. Expression of integrin β₁ on hepatocellular carcinoma cells was detected with flow cytometer. Further, the adhesive force of HCC to HUVEC and the role of integrin β₁ in this adhesive course were studied by micropipette aspiration technique. The results showed that percentage of each cyclic phases of the controlled HCC (non-synchronous) are: G₂+M phase, 11%; G₁ phase, 54%; S phase, 36%; the synchronous rates of G₁ and S phase HCC amount to 74 and 98%, respectively. The expressive fluorescent intensity of integrin β₁ in G₁ phase HCC is depressed significantly than the values of S phase and controlled HCC. Accordingly, the adhesive forces of G₁ phase HCC to HUVEC was significantly lower than the value of S phase cells (P<0.01), but it has no remarkable difference when compared the adhesive force values of S phase HCC with control; the contribution of integrin β₁ was about 50% in the adhesion of HCC to HUVEC. It suggested that HCC would be synchronized preferably in G₁ and S phase with thymine-2-deoxyriboside and colchicines, the adhesive molecule integrin β₁ expressed in a high lever in HCC and presented differences in vary cell cycle, and integrin β₁ played an important roles in adhesion of HCC to HUVEC. Possibly, S phase HCC take a great action in this adhesive course.     

REDV/雷帕霉素复合涂层构建内皮细胞选择性功能界面

运用复合涂层的概念构建了兼具药物洗脱和内皮促进作用的载药涂层. 以载雷帕霉素(Rapamycin, RAP)的聚乙二醇甲基丙烯酸酯(PEGMA)-甲基丙烯酸丁酯(BMA)(PEGMA-BMA, PEGB)为内层, Arg-Glu-Asp-Val(REDV)多肽修饰的PEGBN为外层包裹载药涂层. 体外药物释放结果表明, 雷帕霉素可以维持缓慢稳定的长效释放, 释放过程中没有出现暴释现象. 表面细胞生长行为表明, 雷帕霉素可以有效地阻抗内皮细胞和平滑肌细胞的黏附, 抑制细胞活性; 随着药物释放的进行, 雷帕霉素浓度逐渐减低, 但涂层依然维持对平滑肌细胞的非特异性阻抗; 而REDV修饰的外涂层开始呈现内皮细胞的选择性黏附, 随着释放时间延长, 内皮细胞特异选择性也逐渐加强. 雷帕霉素和REDV多肽协同构建的复合涂层能够有效抑制平滑肌细胞的增殖, 获得内皮细胞选择性黏附.     

Microfluidic devices for studies of shear-dependent platelet adhesion

Adhesion of platelets to blood vessel walls is a shear stress dependent process that promotes arrest of bleeding and is mediated by the interaction of receptors expressed on platelets with various extracellular matrix (ECM) proteins that may become exposed upon vascular injury. Studies of dynamic platelet adhesion to ECM-coated substrates in conventional flow chambers require substantial fluid volumes and are difficult to perform with blood samples from a single laboratory mouse. Here we report dynamic platelet adhesion assays in two new microfluidic devices made of PDMS. Small cross-sections of the flow chambers in the devices reduce the blood volume requirements to <100 microl per assay, making the assays compatible with samples of whole blood obtained from a single mouse. One device has an array of 8 flow chambers with shear stress varying by a factor of 1.93 between adjacent chambers, covering a 100-fold range from low venous to arterial. The other device allows simultaneous high-resolution fluorescence imaging of dynamic adhesion of platelets from two different blood samples. Adhesion of platelets in the devices to three common ECM substrate coatings was verified to conform with published results. The devices were subsequently used to study the roles of extracellular and intracellular domains of integrin alphaIIbbeta3, a platelet receptor that is a central mediator of platelet aggregation and thrombus formation. The study involved wild-type mice and two genetically modified mouse strains and showed that the absence of the integrin impaired adhesion at all shear stresses, whereas a mutation in its intracellular domain reduced the adhesion only at moderate and high stresses. Because of small sample volumes required, the devices could be employed in research with genetically-modified model organisms and for adhesion tests in clinical settings with blood from neonates.     

Peptide-mediated selective adhesion of smooth muscle and endothelial cells in microfluidic shear flow

Microfluidic devices have recently emerged as effective tools for cell separation compared to traditional techniques. These devices offer the advantages of small sample volumes, low cost, and high purity. Adhesion-based separation of cells from heterogeneous suspensions can be achieved by taking advantage of specific ligand-receptor interactions. The peptide sequences Arg-Glu-Asp-Val (REDV) and Val-Ala-Pro-Gly (VAPG) are known to bind preferentially to endothelial cells (ECs) and smooth muscle cells (SMCs), respectively. This article examines the roles of REDV and VAPG and fluid shear stress in achieving selective capture of ECs and SMCs in microfluidic devices. The adhesion of ECs in REDV-coated devices and SMCs in VAPG-coated devices increases significantly compared to that of the nontargeted cells with decreasing shear stress. Furthermore, the adhesion of these cells is shown to be independent of whether these cells flow through the devices as suspensions of only one cell type or as a heterogeneous suspension containing ECs, SMCs, and fibroblasts. Whereas the overall adhesion of cells in the devices is determined mainly by shear stress, the selectivity of adhesion depends on the type of peptide and on the device surface as well as on the shear stress.     

Expression of integrin beta1 and its roles on adhesion between different cell cycle hepatocellular carcinoma cells (SMMC-7721) and human umbilical vein endothelial cells

To investigate expression of integrin β₁ and its roles on adhesion between different cell cycle hepatocellular carcinoma cell (HCC) and human umbilical vein endothelial cells (HUVEC), the synchronous G₁ and S phase HCC were achieved through thymine-2-deoxyriboside and colchicines sequential blockage method and double thymine-2-deoxyriboside blockage method, respectively. Expression of integrin β₁ on hepatocellular carcinoma cells was detected with flow cytometer. Further, the adhesive force of HCC to HUVEC and the role of integrin β₁ in this adhesive course were studied by micropipette aspiration technique. The results showed that percentage of each cyclic phases of the controlled HCC (non-synchronous) are: G₂+M phase, 11%; G₁ phase, 54%; S phase, 36%; the synchronous rates of G₁ and S phase HCC amount to 74 and 98%, respectively. The expressive fluorescent intensity of integrin β₁ in G₁ phase HCC is depressed significantly than the values of S phase and controlled HCC. Accordingly, the adhesive forces of G₁ phase HCC to HUVEC was significantly lower than the value of S phase cells (P<0.01), but it has no remarkable difference when compared the adhesive force values of S phase HCC with control; the contribution of integrin β₁ was about 50% in the adhesion of HCC to HUVEC. It suggested that HCC would be synchronized preferably in G₁ and S phase with thymine-2-deoxyriboside and colchicines, the adhesive molecule integrin β₁ expressed in a high lever in HCC and presented differences in vary cell cycle, and integrin β₁ played an important roles in adhesion of HCC to HUVEC. Possibly, S phase HCC take a great action in this adhesive course.     

Effect of shear stress on adhering polyelectrolyte capsules

A parallel plate flow chamber was implemented to study the deformation and adhesion of individual spherical hollow polyelectrolyte multilayered shells adhering to a coated surface. The device provides a well-defined laminar flow allowing the determination of the shear stress to which the capsules are being exposed up to 15 N/m(2). The results of the investigations indicate a strong dependence of the adhesion and mechanical resistance on the capsule size and wall thickness. Thin walled capsules, constituted of 8 polyelectrolyte layers (thickness congruent with 12 nm), are immediately deformed when exposed to flow while thick capsules, constituted of 16 layers (thickness congruent with 24 nm), of equal dimensions are detached from the surface for drag forces below 50 nN. It was observed that adhering capsules exposed to flow undergo an increase in their adhesion area in the direction of flow, resulting in rolling of the capsules. It was also found that the resistance of the capsules decreases after acetone treatment, indicating a weakening of the polyelectrolyte multilayer structure in the presence of this solvent.     

Extended applications of electric cell-substrate impedance sensing for assessment of the structure-function of α2β1 integrin

Electric cell-substrate impedance sensing (ECIS) was applied to assess the structure-function of α2β1 integrin, receptor for collagen and laminin. On collagen-coated gold electrodes, expression of this integrin on human rhabdomyosarcoma (RD) cells (RDX2C2) yielded a five-fold increase in resistance when compared with mock transfected RD (RDpF) cells (34.5±5.2 versus 6.5±0.8 Ω/cell). An intermediate level of 16±2 Ω/cell was measured upon expression of an α2β1 mutant that lacked the α2 cytoplasmic domain (RDX2CO). On laminin, the resistance measured for RDX2C2 cells was also higher but only twice that of RDpF cells at 71±4 and 37±4 Ω/cell, respectively. In comparison, RDX2CO cells (38±4 Ω/cell), exhibiting no enhanced adhesive function, yielded a similar result to that of RDpF cells. On fibronectin, RDX2C2 and RDpF cells, exhibiting comparable levels of adhesion, were similar in resistance measurements at 85±5and 89±7 Ω/cell, respectively. It has been shown that deletion of α2 cytoplasmic domain results in dysregulated recruitment of the α2β1 mutant to focal adhesion complexes that mediate binding of fibronectin. RDX2CO cells on fibronectin, exhibiting reduced adhesive function, was associated with noticeably lower resistance (60±4 Ω/cell). Monitoring electroporation of the RD plasma membrane also indirectly validated cell attachment as reflected by the resistance measured. Results from this study demonstrated the potential of ECIS for study of the structure-function of βl integrin adhesion receptors.     

Traction force microscopy on-chip: shear deformation of fibroblast cells

We develop here a microfabrication compatible force measurement technique termed as ultrasoft polydimethylsiloxane-based traction force microscopy (UPTFM). This technique is devised for mapping the cellular traction forces imparted on the adhering substrate, so as to depict the physiological state of the cells surviving in the micro-confinement. We subsequently integrate the technique with a microfluidic platform for evaluating different states of stress in adherent mouse skin fibroblast L929 cells. Utilizing this technique, we monitor the spatio-temporal evolution of cellular traction forces for static incubation periods with no media replenishment as well as for dynamic flow conditions that inherently induce cell deformation and detachment. While the studies conducted on a quiescent fluid medium enable us to obtain an optimal static cell incubation period, those executed under dynamic flow conditions provide us with the minuscule details of the cellular response, deformation and detachment processes. We elucidate the correlation between shear activated cytosolic calcium ion release profile and the local traction forces as an attempt to apply UPTFM in the domain of functional biological purposes. Pertinently, we map the centroidal displacement and the maximum traction stress in characterizing the critical shear rate conditions for the onset of the cell peeling-off process, and demonstrate their contrasting features in comparison to the vesicle lift off processes in a shear flow. Theoretically, these deviations can only be explained by taking physiologically relevant cell adhesion models into consideration, which, while retaining the intrinsic simplicity, are able to reproduce the key experimental outcomes at least with qualitative agreement. We execute further theoretical investigations with variable magnitudes of membrane stiffness, viscosity and adhesion strength, so as to come up with interesting biophysical confluences.     

RO-heparin Inhibits L-Selectin-mediated Neutrophils Adhesion to Vascular Endothelium Under Flow Conditions

Introduction Migrationandrecruitmentofleukocytesfromblood toinflammatorylesionsitesaresequentiallyregulated byadhesionmoleculesandtheirreceptors[1].These lectinfamilyplaysamajorroleininitiatingattachement ofneutrophilstotheactivatedendothelium.P selectin,…     

Direct Adhesion of Endothelial Cells to Bioinspired Poly(dopamine) Coating Through Endogenous Fibronectin and Integrin α5β1

Mussel‐inspired poly(dopamine) (PDA) coating is proven to be a simple, versatile, and effective strategy to promote cell adhesion onto various substrates. In this study, the initial adhesive behavior of human umbilical vein endothelial cells (HUVECs) is evaluated on a PDA coating under serum‐free conditions. It is found that HUVECs can attach directly to and spread with well‐organized cytoskeleton and fibrillar adhesions on the PDA surface, whereas cells adhere poorly to and barely spread on the control polycaprolactone surface. Endogenous fibronectin and α₅β₁ integrin are found to be involved in the cell adhesion process. These findings will lead to a better understanding of interactions between cells and PDA coating, paving the way for the further development of PDA.

     

Vascular mimetics based on microfluidics for imaging the leukocyte--endothelial inflammatory response

We describe the development, validation, and application of a novel PDMS-based microfluidic device for imaging leukocyte interaction with a biological substrate at defined shear force employing a parallel plate geometry that optimizes experimental throughput while decreasing reagent consumption. The device is vacuum bonded above a standard 6-well tissue culture plate that accommodates a monolayer of endothelial cells, thereby providing a channel to directly observe the kinetics of leukocyte adhesion under defined shear flow. Computational fluid dynamics (CFD) was applied to model the shear stress and the trajectory of leukocytes within the flow channels at a micron length scale. In order to test this model, neutrophil capture, rolling, and deceleration to arrest as a function of time and position was imaged in the transparent channels. Neutrophil recruitment to the substrate proved to be highly sensitive to disturbances in flow streamlines, which enhanced the rate of neutrophil-surface collisions at the entrance to the channels. Downstream from these disturbances, the relationship between receptor mediated deceleration of rolling neutrophils and dose response of stimulation by the chemokine IL-8 was found to provide a functional readout of integrin activation. This microfluidic technique allows detailed kinetic studies of cell adhesion and reveals neutrophil activation within seconds to chemotactic molecules at concentrations in the picoMolar range.     

Nitrogen-rich plasma-polymerized coatings on PET and PTFE surfaces improve endothelial cell attachment and resistance to shear flow

Low seeding efficiency and poor cell retention under flow-induced shear stress limit the effectiveness of in vitro endothelialization strategies for small-diameter vascular grafts. Primary-amine-rich plasma-polymerized coatings (PPE:N) deposited using low- and atmospheric-pressure plasma discharges on PET and PTFE are evaluated for their ability to improve endothelial cells' kinetics and strength of attachment. PPE:N coatings increase cell adhesion and adhesion rate, spreading, focal adhesion, and resistance to flow-induced shear compared with bare and gelatin-coated PET and PTFE. In particular, about 90% of the cells remain on coated surfaces after 1 h exposure to shear. These coatings, therefore, appear as a promising versatile approach to improve cell seeding strategies for vascular grafts.     

High‐Throughput,Label‐Free Isolation of Cancer Stem Cells on the Basis of Cell Adhesion Capacity

Herein we report a microfluidics method that enriches cancer stem cells (CSCs) or tumor‐initiating cells on the basis of cell adhesion properties. In our on‐chip enrichment system, cancer cells were driven by hydrodynamic forces to flow through microchannels coated with basement membrane extract. Highly adhesive cells were captured by the functionalized microchannels, and less adhesive cells were collected from the outlets. Two heterogeneous breast cancer cell lines (SUM‐149 and SUM‐159) were successfully separated into enriched subpopulations according to their adhesive capacity, and the enrichment of the cancer stem cells was confirmed by flow cytometry biomarker analysis and tumor‐formation assays. Our findings show that the less adhesive phenotype is associated with a higher percentage of CSCs, higher cancer‐cell motility, and higher resistance to chemotherapeutic drugs.     

Endothelial cell adhesion on polyelectrolyte multilayer films functionalised with fibronectin and collagen

The seeding of endothelial cells on biomaterial surfaces has become a major challenge to achieve better haemocompatibility of these surfaces. Multilayers of polyelectrolytes formed by the layerby-layer method are promising in this respect. In this study, the interactions of endothelial cells with multilayered polyelectrolytes films were investigated. The build-ups were prepared by selfassembled alternatively adsorbed polyanions and polycations functionalised with fibronectin and collagen. Anionic poly(sodium 4-styrenesulfonate) and cationic poly(allylamine hydrochloride) polyelectrolytes were chosen as a model system. Elaborated surfaces were characterised by electrochemical impedance spectroscopy and cyclic voltammetry. The modified electrode showed good reversible electrochemical properties and high stability in an electrolyte solution. The film ohmic resistance was highest when the film was coated with fibronectin; the parameters so determined were correlated with atomic force microscopy images. Cell colorimetric assay (WST-1) and immunofluorescence were used to quantify the cell viability and evaluate the adhesion properties. When cultured on a surface where proteins were deposited, cells adhered and proliferated better with fibronectin than with collagen. In addition, a high surface free energy was favourable to adhesion and proliferation (48.8 mJ m⁻² for fibronectin and 39.7 mJ m⁻² for collagen, respectively). Endothelial cells seeded on functionalised-polyelectrolyte multilayer films showed a good morphology and adhesion necessary for the development of a new endothelium.     

A multi-shear perfusion bioreactor for investigating shear stress effects in endothelial cell constructs

Tissue engineering research is increasingly relying on the use of advanced cultivation technologies that provide rigorously-controlled cell microenvironments. Herein, we describe the features of a micro-fabricated Multi-Shear Perfusion Bioreactor (MSPB) designed to deliver up to six different levels of physiologically-relevant shear stresses (1-13 dyne cm(-2)) to six cell constructs simultaneously, during a single run. To attain a homogeneous fluid flow within each construct, flow-distributing nets photo-etched with a set of openings for fluid flow were placed up- and down-stream from each construct. Human umbilical vein endothelial cells (HUVECs) seeded in alginate scaffolds within the MSPB and subjected to three different levels of shear stress for 24 h, responded accordingly by expressing three different levels of the membranal marker Intercellular Adhesion Molecule 1 (ICAM-1) and the phosphorylated endothelial nitric oxide synthetase (eNOS). A longer period of cultivation, 17 d, under two different levels of shear stress resulted in different lengths of cell sprouts within the constructs. Collectively, the HUVEC behaviour within the different constructs confirms the feasibility of using the MSPB system for simultaneously imposing different shear stress levels, and for validating the flow regime in the bioreactor vessel as assessed by the computational fluid dynamic (CFD) model.