镍钴氢氧化物的制备及其电化学性能

采用化学共沉淀法成功制备了片状镍钴氢氧化物,并探究了不同镍钴物质的量比对样品形貌及电化学性能的影响。通过X射线衍射(XRD)、扫描电子显微镜(SEM)、X射线光电子能谱仪(XPS)及比表面积孔径分析仪(BET)对样品的结构、形貌进行了表征,并利用循环伏安法、恒电流充放电法等对其电化学性能进行了分析。结果表明,n(Ni)∶n(Co)=4∶1的样品直接用作电极材料时,具有最好的电化学性能:在0.5 A/g的电流密度下拥有1852 F/g的高比容量;电流密度增大20倍时,仍拥有1330 F/g的高比容量。以镍钴氢氧化物为正极,活性炭为负极组装的非对称式超级电容器在346 W/kg的功率密度下,能量密度达52 Wh/kg,在循环10000圈之后电容保持率为92%。优异的电化学性能表明,片状镍钴氢氧化物是很有应用潜力的电极材料之一。     

Nitrogen-doped porous carbon coated on MnCo2O4 nanospheres as electrode materials for high-performance asymmetric supercapacitors

Spinel-based nanostructured materials are commonly used as promising electrode materials for supercapacitor applications. The combination of heteroatom-doped carbon material with spinel oxides substantially improves the specific capacitance and cyclic stability. In this work, dopamine-derived nitrogen-doped carbon was coated on spinel phase MnCo₂O₄ nanospheres using simple solvothermal and calcination methods. Surface morphology and the crystalline structure of the prepared MnCo₂O₄@Nitrogen-doped carbon were confirmed by FESEM and X-ray diffraction. The electrochemical performance of MnCo₂O₄@Nitrogen-doped carbon electrode material was analyzed by cyclic voltammetry, galvanostatic charge–discharge, and electrochemical impedance spectroscopy techniques. MnCo₂O₄@nitrogen-doped carbon exhibits the highest specific capacitance of 1200 F/g compared to MnCo₂O₄ spheres are 726 F/g at 1 A/g and exhibits excellent cyclic stability (capacitance retention of 87% at 7 A/g after 3000 cycles). The enhanced performance of the composite might be benefitted from the synergistic effect between nitrogen-doped carbon on porous MnCo₂O₄ spheres. Furthermore, an asymmetric supercapacitor device was fabricated by using the optimized composition of MnCo₂O₄@NC-2 as a positive electrode and nitrogen, sulfur-doped reduced graphene oxide (NS-rGO) as a negative electrode, respectively. This asymmetric supercapacitor device achieves a maximum energy density of 61.0 Wh/kg at a power density of 2889 W/kg and possesses excellent capacitance retention of 95% after 5000 cycles at 7 A/g.     

Exfoliated graphite nanosheets/carbon nanotubes hybrid materials for superior performance supercapacitors

Nanostructured hybrid material of exfoliated graphite nanosheets and carbon nanotubes (GNSNT) served as supercapacitor electrode materials was presented. The nanostructured hybrid was prepared by a facile chemical reduction method. The hybrid material was characterized by X-ray diffraction technique, transmission electron microscopy, scanning electron microscopy, cyclic voltammetry, galvanostatic charge/discharge cycling, and four-point probe conductivity measurement to represent a well-defined nanostructure possessing a vast number of active sites and delivering the ingredients for a fast effective charge separation network. Our results clearly demonstrated that the hybrid possess a superior performance. A specific capacitance value 266 F/g was obtained for GNSNT hybrid electrode at a current density of 0.1 A/g, while it was only 185 F/g for exfoliated graphite nanosheets (GNS). At a higher current density of 2 A/g, the GNSNT electrode still keeps a specific capacitance of 220 F/g, which is more than double that of GNS. This synergistic effect of the nanostructured hybrid material offers an effective network for charge separation and therefore renders a significantly enhanced specific capacitance and rate capability.     

Facile synthesis of high electrical conductive CoP via solid-state synthetic routes for supercapacitors

Co-P precursor was prepared by a mechanical alloying method and then is controlled to synthesis of Co P phase through an annealing method. The optimal conditions of ball milling and annealing temperature are investigated. The Co P exhibits higher electrical conductivity than graphite and cobalt oxide, showing excellent pseudocapacitive properties due its high electrical conductivity which can result in a fast electron transfer in high rate charge–discharge possess. The as-obtained Co P electrode achieves a high specific capacitance of 447.5 F/g at 1 A/g, and displays an excellent rate capability as well as good cycling stability. Besides, the asymmetric supercapacitor(ASC) based on the Co P as the positive electrode and activated carbon(AC) as the negative electrode was assembled and displayed a high rate capability(60%of the capacitance is retained when the current density increased from 1 A/g to 12 A/g), excellent cycling stability(96.7% of the initial capacitance is retained after 5000 cycles), and a superior specific energy of19 Wh/kg at a power density of 350.8 W/kg. The results suggest that the Co P electrode materials have a great potential for developing high-performance electrochemical energy storage devices.     

Fabrication of high-performance supercapacitor using date leaves-derived submicron/nanocarbon

Offering a suitable and low-cost electrode material is one of the most important and challenging demands in supercapacitor research. In this aspect, carbon prepared from biomass by simply pyrolysis and ball milling could be one ideal electrode material for supercapacitor applications. Hence, a novel type of submicron/nanocarbon was prepared from date leaves by simple pyrolysis and ball milling. After morphological and chemical characterizations, the prepared carbon was used as the electrode material upon immobilizing on a steel substrate (current collector) to fabricate a high-performance symmetric supercapacitor. The fabricated supercapacitor took advantage of the carbon's electric double layer capacitance behaviour and pseudocapacitance behaviour of heteroatoms present in the carbon. The developed supercapacitor device provides significant charging/discharging using the optimum electrolyte (0.1 M sulfuric acid). That manifested with a high specific capacitance of (～107 F/g) and maintained above 92% of its initial capacitance after 1000 charge/discharge cycles. Furthermore, the supercapacitor provides an energy density of ～10 Wh/Kg at a power density of ～200 W/Kg. This work provides an inexpensive, high-performance supercapacitor that depends on the biomass (date palm leaves) and nominates it as a capable candidate for mass-product in the future.     

Design and Preparation of Graphene/Fe2O3 Nanocomposite as Negative Material for Supercapacitor

The development of high specific capacitance electrode materials with high efficiency, scalability and economic feasibility is significant for the application of supercapacitors, however, the synthesis of electrode material still faces huge challenges. Herein, graphene(G)/Fe₂O₃ nanocomposite was prepared via a simple hydrothermal method connected with subsequent thermal reduction process. Scanning electron microscopy(SEM) and transmission electron microscopy(TEM) results showed rod-like Fe₂O₃ nanoparticles were prepared and well-dispersed on graphene layers, providing a rich active site and effectively buffering the aggregation of Fe₂O₃ nanoparticles in the process of electrochemical reaction. The specific capacitance of the obtained G/Fe₂O₃ nanocomposite as negative electrode for supercapacitor was 378.7 F/g at the current density of 1.5 A/g, and the specific capacitance retention was 88.76% after 3000 cycles. Furthermore, the asymmetric supercapacitor(ASC) was fabricated with G/Fe₂O₃ nanocomposite as negative electrode, graphene as positive electrode, which achieved a high energy density of 64.09 W∙h/kg at a power density of 800.01 W/kg, maintained 30.07 W∙h/kg at a power density of 8004.89 W/kg, and retained its initial capacitance by 78.04% after 3000 cycles. The excellent result offered a promising way for the G/Fe₂O₃ nanocomposite to be applied in high energy density storage systems.     

Pulse polymerized polypyrrole electrodes for high energy density electrochemical supercapacitor

A novel method of pulsed polymerization for pyrrole exhibiting highest capacitance and very high energy density polypyrrole supercapacitor is reported. Stable polypyrrole films with good electrochemical reversibility and high doping degree were obtained by applying ultra short on time current pulse for polymerization. Pulse on time plays an important role in controlling chain size and chain defects whereas pulse off time contributes in polymer conjugation and orientation. A regime of pulse on time is identified to yield highly capacitive and stable films for supercapacitor application. Very high specific capacitance of 400 F/g and an unexpectedly high energy density of 250 Wh/kg were obtained form pulsed polymerized ordered polypyrrole structures in acidic electrolyte. Stability tests performed on pulsed polymerized pPy electrode yield long cycling life up to 10,000 cycles at charge/discharge current density of 5 mA/cm².     

Supercapacitors based on self-assembled graphene organogel

Self-assembled graphene organogel (SGO) with 3-dimensional (3D) macrostructure was prepared by solvothermal reduction of a graphene oxide (GO) dispersion in propylene carbonate (PC). This SGO was used as an electrode material for fabricating supercapacitors with a PC electrolyte. The supercapacitor can be operated in a wide voltage range of 0-3 V and exhibits a high specific capacitance of 140 F g(-1) at a discharge current density of 1 A g(-1). Furthermore, it can still keep a specific capacitance of 90 F g(-1) at a high current density of 30 A g(-1). The maximum energy density of the SGO based supercapacitor was tested to be 43.5 Wh kg(-1), and this value is higher than those of the graphene based supercapacitors with aqueous or PC electrolytes reported previously. Furthermore, at a high discharge current density of 30 A g(-1), the energy and power densities of the supercapacitor were measured to be 15.4 Wh kg(-1) and 16,300 W kg(-1), respectively. These results indicate that the supercapacitor has a high specific capacitance and power density, and excellent rate capability.     

Electrodeposited NiSe_2 on carbon fiber cloth as a flexible electrode for high-performance supercapacitors

A flexible electrode of nickel diselenide/carbon fiber cloth(NiSe_2/CFC) is fabricated at room temperature by a simple and efficient electrodeposition method. Owing to NiSe_2 character of nanostructure and high conductivity, the as-synthesized electrodes possess perfect pseudocapacitive property with high specific capacitance and excellent rate capability. In three-electrode system, the electrode specific capacitance of the NiSe_2/CFC electrode varies from 1058 F g~(-1) to 996.3 F g~(-1) at 2 A g~(-1) to 10 A g~(-1) respectively, which shows great rate capability. Moreover, the NiSe_2 electrode is assembled with an active carbon(AC) electrode to form an asymmetric supercapacitor with an extended potential window of 1.6 V. The asymmetric supercapacitor possesses an excellent energy density 32.7 Wh kg~(-1) with a power density 800 W kg~(-1) at the current density of 1 A g~(-1). The nanosheet array on carbon fiber cloth with high flexibility, specific capacitance and rate capacitance render the NiSe_2 to be regarded as the promising material for the high performance superconductor.     

Synthesis of nickel selenide thin films for high performance all-solid-state asymmetric supercapacitors

As a significant semiconductor, nickel selenide shows enormous potential and extensive application prospects in the field of sensor, photocatalysis and supercapacitor. In this paper, nickel selenide (Ni₃Se₂, NiSe) thin films were successfully fabricated on stainless-steel sheet using a facile, effective electrodeposition technique. The morphologies, microstructures and chemical compositions of the thin films are characterized systematically. Electrochemical tests exhibit that the Ni₃Se₂ and NiSe possess high specific capacitance of 581.1 F/g and 1644.7 F/g, respectively. A flexible, all-solid-state asymmetric supercapacitor is assembled by utilizing NiSe film as positive electrode and activated carbon as negative electrode. The solid device delivers a high areal capacitance of 27.0 mF/cm² at the current density of 0.7 mA/cm². The maximum volumetric energy density and power density of the NiSe//AC asymmetric SCs can achieve 0.26 mWh/cm³ and 33.35 mW/cm³, respectively. The device shows robust cycling stability with 84.6% capacitance retention after 10,000 cycles, outstanding flexibility and satisfactory mechanical stability. Moreover, two devices in series can light up a red light-emitting diode, which displayed great potential applications for energy storage.     

N-doped honeycomb-like porous carbon towards high-performance supercapacitor

Biomass-derived porous carbon with developed pore structure is critical to achieving high performance electrode materials. In this work, we report a grape-based honeycomb-like porous carbon (GHPC) prepared by KOH activation and carbonization, followed by N-doping (NGHPC). The obtained NGHPC exhibits a unique honeycomb-like structure with hierarchically interconnected micro/mesopores, and high specific surface area of 1268 m²/g. As a supercapacitor electrode, the NGPHC electrode exhibits a remarkable specific capacitance of 275 F/g at 0.5 A/g in a three-electrode cell. Moreover, the NGHPC//NGHPC symmetric supercapacitor displays a high energy density of 12.6 Wh/kg, and excellent cycling stability of approximately 95.2% capacitance retention after 5000 cycles at 5 A/g. The excellent electrochemical performance of NGHPC is ascribed to its high specific surface area, honeycomb-like structure and high-content of pyrodinic-N (36.29%). It is believed that grape-based carbon materials show great potential as advanced electrode materials for supercapacitors.     

Three-dimensional bundle-like multiwalled carbon nanotubes composite for supercapacitor electrode application

Bundle-type mutil-walled carbon nanotubes (MWCNTs) composite electrode is the first investigation and publication for the supercapacitor application. According to the thermogravimetric analysis results, as-synthesized BCNTs are considered as the electrode materials for supercapacitors and electrochemical double-layer capacitor in this study. The Brunauer–Emmett–Teller specific surface area of as-prepared bundled carbon nanotubes (BCNTs) is 95.29 m²/g given to a type III isotherm and H3 hysteresis loops. Slow scanning rates promote and enhance to achieve high C_b because of the superior conductivity of CNT bundles and one side close-layered Ni/Mg/Mo alloy inside the BCNT-based electrode and facile electron diffusivity between electrolyte and electrode. The specific capacitance C_s (1,560 F/g) is nearly equal to the maximum specific capacitance, which the BCNT-based composite electrode can actually be able to charge or fill in. The maximum energy density value is 195 Wh/kg with corresponding power density values of 0.21 kW/kg. Furthermore, the active 3D BCNTs material fabricated electrode enhances to contact the electrolyte directly and decreases the ion diffusion limitation. Electrochemical impedance spectroscopy spectrum summarized as the low-frequency area controls by mass transfer limitation, and the high-frequency area dominates by charge transfer of kinetic control. After 2,000 consecutive cyclic voltammetry sacnings and galvanostatic charge-discharge cycles at a current density of 1.67 A/g performs, the specific capacitance retentions of 3D BCNTs electrodes achieved 128.2 and 77.3%, respectively. Three-dimensional BCNT composite electrodes exhibit good conductivity and low charge transfer resistance, which is beneficial to fast charge transfer between the BCNTs electrode materials and electrolytes.     

Perovskite SrCo0.9Nb0.1O3−δ as an Anion‐Intercalated Electrode Material for Supercapacitors with Ultrahigh Volumetric Energy Density

We have synthesized and characterized perovskite‐type SrCo_0.9Nb_0.1O_3−δ (SCN) as a novel anion‐intercalated electrode material for supercapacitors in an aqueous KOH electrolyte, demonstrating a very high volumetric capacitance of about 2034.6 F cm⁻³ (and gravimetric capacitance of ca. 773.6 F g⁻¹) at a current density of 0.5 A g⁻¹ while maintaining excellent cycling stability with a capacity retention of 95.7 % after 3000 cycles. When coupled with an activated carbon (AC) electrode, the SCN/AC asymmetric supercapacitor delivered a specific energy density as high as 37.6 Wh kg⁻¹ with robust long‐term stability.     

基于过渡金属硫化物/还原氧化石墨烯复合物的高性能超级电容器

组装高能量密度的非对称超级电容器需要使用比电容大、 体积变化小且循环稳定性好的电极材料. 过渡金属硫化物(TMSs)与纳米碳材料的复合物是此类电极材料之一. 采用水热法合成了由Cu-Mo硫化物在微波剥离的还原氧化石墨烯表面生长的复合材料(CuS-MoS₂/MErGO). 此复合材料在电流密度为2 A/g时具有高达861.5 F/g的比电容和良好的循环稳定性. 将1.6 V的电池电压施加在由NiS/MErGO为正极, CuS-MoS₂/MErGO为负极组装成的不对称超级电容器上时, 该电容器的功率密度为1.28 kW/kg, 且能量密度保持为54.2 W·h·kg^-1. 结果表明, TMS复合材料是一种很有前途的高性能电化学储能材料, 尤其是用于非对称超级电容器的组装.     

Flexible carbon membrane supercapacitor based on γ-cyclodextrin-MOF

Supercapacitors (SCs) with high energy density and power density are a research hotspot. Herein, we report a flexible porous carbon membrane supercapacitor prepared by electrospinning polyacrylonitrile (PAN) with γ-cyclodextrin-MOF (γ-CD-MOF) and then carbonizing at 900 °C. BET results showed that the supercapacitor retained the skeleton of γ-CD, γ-CD-MOF and the pores formed by the spun-fibers, which were 0.73, 1.09 and 23–186 nm, respectively, showing a high specific surface area of 134.7 m²/g. The hierarchically porous structures ensure rapid charge transfer and ion diffusion, resulting in the PAN/γ-CD-MOF carbon electrode with a high capacity of 283.3 F/g. Moreover, the supercapacitor had a high energy density up to 17.5 Wh/kg and power density up to 6 kW/kg. Significantly, it showed excellent cycle stability with a capacitance retention of 97.5% after 6000 cycles. This work provides a supramolecular strategy to construct a flexible porous carbon membrane, which has potential for supercapacitor applications.     

Asymmetric supercapacitors based on high capacitance Ni6MnO8 and graphene

A fast, facile and cost-effective method is used to synthesize Ni₆MnO₈ electrode with high electrochemical performance. The supercapacitor based on Ni₆MnO₈ electrode exhibits excellent stability, high area specific capacitance and promising energy and power density.     

Cobalt–iron decorated tellurium nanotubes for high energy density supercapacitor

We report the synthesis of cobalt-iron (Co–Fe) decorated tellurium nanotubes (Te NTs) using semiconductive Te NTs as a sacrificial template, following a wet chemical method. The interplay of Co and Fe precursor concentrations incorporated with Te NT, residual hydrazine hydrate, and the negative surface charge of Te NT plays a significant role in obtaining various bimetallic telluride structures. The one-dimensional (1-D) structure of Co–Fe decorated Te NTs with Te NTs in the backbone provides superior conductivity and exhibits high electrochemical performance with battery type electrode behavior. A negative surface charge value of ?18.9 mV for Te NTs is obtained due to the presence of an anionic surfactant as sodium dodecyl sulfate (SDS) forms a bilayer on Te NTs. To tune the energy density performance, the Co–Fe decorated Te NTs electrode is combined with the electric double-layer capacitors (EDLC) type electrode activated carbon (AC). The asymmetric assembly shows an excellent specific capacitance of 179.2 F/g (48.7 mAh/g) at a current density of 0.9 A/g in 4 M KOH electrolyte. More importantly, it exhibits a maximum energy density of 62.1 Wh/kg at a power density of 1,138.2 W/kg under a potential window of 1.58 V. This potential finding shows the significant applicability of Te NTs as a template for the synthesis of bimetallic tellurides with unique morphologies. The synergistic effect from multiple metals and anisotropic morphology is beneficial for energy storage applications.     

Facile SILAR Processed Bi2S3:PbS Solid Solution on MWCNTs for High‐performance Electrochemical Supercapacitor

Carbon based composite materials have gained much attention because of fulfilling desirable properties for supercapacitor application. In the featured work, the thin film of Bi₂S₃:PbS solid solution has been synthesized on multi‐walled carbon nanotubes (MWCNTs) by simple successive ionic layer adsorption and reaction (SILAR) method. The nanoparticle morphology provides sufficient electroactive channels for electrolyte ions to penetrate during electrochemical activities. The composite exhibits superior specific capacitance 676 F/g at constant specific current density of 5.56 A/g with fast charge‐discharge cycles. In association of energy storage characteristics, the fabricated symmetric cell exhibits excellent energy density of 13.36 Wh/kg by acquiring power density of 0.83 kW/kg. The superior results of the hybrid electrode promise a novel direction for high performance supercapacitor application.     

混合盐活化胖大海基多孔炭的制备及超级电容器电极材料性能

利用浸泡后的胖大海为碳源, 氯化锌和氯化锂混合盐作为活化剂, 采用炭化胖大海(PC-1)、添加氯化锌(PC-2)或添加氯化锌/氯化锂(PC-3)的胖大海的方法制备了3种多孔碳材料, 并通过三电极体系测试电极材料的电化学性能。结果表明, 3种碳材料在电流密度为0.5 A/g的比电容分别为69、132和228 F/g; 当电流密度增加至10 A/g时, PC-3的比电容仍高达166 F/g, 具有良好的倍率性能。该实验表明, 通过氯化锌/氯化锂复合盐活化胖大海分级多孔碳可作为高性能超级电容器电极材料。     

碳纳米管/聚苯胺/石墨烯复合纳米碳纸及其电化学电容行为

通过真空抽滤的方法制备碳纳米管纸,并对其进行循环伏安电化学氧化处理.以该电化学氧化处理的碳纳米管(CV-CNT)纸为基体,采用电化学聚合沉积聚苯胺(PANI),随后吸附石墨烯(GR),制备具有三明治夹心结构的碳纳米管/聚苯胺/石墨烯(CV-CNT/PANI/GR)复合纳米碳纸.该结构外层为GR,内层由PANI包裹的CNT形成网络骨架,充分发挥三者各自优势构建柔性电极材料.用场发射扫描电镜(FE-SEM)、透射电子显微镜(TEM)、拉曼光谱对其形貌与结构进行表征,并测试其电化学性能.研究发现:PANI呈纳米晶须状,并均匀包裹在CV-CNT表面;该复合碳纸具有良好的电容特性、大电流充放电特性以及良好的循环稳定性能.电流密度为0.5A·g-1时,比电容可达415F·g-1;20A·g-1时仍能保持106F·g-1的比电容.由于GR的保护作用,1000次循环之后较CV-CNT/PANI保持更高的有效比电容.该CV-CNT/PANI/GR复合碳纸展现出在高性能超级电容器柔性电极材料的潜在应用价值.